Flatblade screwdrivermedium

Philips screwdriverUK size #3 pozi head

0 0 20 30 40 50 60 70 80 90 00 0 20 30 40 50

0 2 3 4 5 6

Ruler/tapemeasure

Smallhammer

CordlessDrill

Eye protection

Spirit level

Saw

KND 01 rev. 03 Date: 10/05/19

Single Wardrobe

DIMENSIONS

Width

Depth

Height

40/45/50 cm

59 cm

226 cm

Pre-Assembly Preparation: please check the pack contents before starting to assemble this product.

Clean hands or light coloured protective gloves should be used. Please don’t wear dark protective gloves, as may mark the products.

Product is heavy. TAKE CARE when lifting to avoid personal injury and (or) damage to the product.

The fittings packs will contain SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN.

Necessary Tools

Safety and care advice

IMPORTANT - PLEASE READ THESE INSTRUCTIONS FULLY BEFORE STARTING ASSEMBLY

• Check you have all the components and tools listed on pages 1,4 and 5.

Remove all fittings from theplastic bags and separate them into their groups.

• Keep children and animals away from the work area, small parts could choke if swallowed.

• Make sure you have enough space to layout the parts beforestarting.

• Do not stand or put weight on the panels, this could cause damage.

• Assemble the unit as close to its final position (in the same room) as possible.

• It is our recommendation touse a hand screw-driver when inserting screws for handles to prevent over-tightening

• Assemble on a soft level surface to avoid damaging the unit or your floor.

• Parts of the assembly will be easier with 2 people.

• If using power tools, please follow the safety instructions supplied with the tools.

• Skin contact: Removecontamination by washing with soap and water. This procedureshould also be followed prior to eating and drinking.

• Eye contact: Rinse immediately with clean water for 15 minutes and seek medical advice.

GLUE SAFETY - TAKE CARE WHEN USING GLUE, PLEASE FOLLOW THE ADVICE BELOW

CLEANING INSTRUCTIONS

• This product has been manufactured using modern manufacturing methods and materials. With appropriate in-home care and mainte-nance it will provide trouble free performances. Many domestic multi-purpose cleaning agents are unsuitable for use on this product.

• The use of aggressive chemicals can result in irreversible damage. Please follow these guidelines care-fully.

• To clean the internal and external area of yourwardrobe and chest of draw-ers, use only 5% soap, 95% water solution, wiping with a damp (not wet) cloth. Dry with a clean cloth.

• Dust your furniture with a soft clean cloth.

• For stubborn stains, on the exterior face of your furniture, we recommend the use of a solvent cleaner designed to remove dirt from furniture without harming the finish.

•

• Please dispose of all packaging carefully and responsibly.

Warning: Before attempting to fix to the wall, check the wall for hidden pipes and cables.

• If swallowed: Seek medical advice immediately. If possi-ble show product information label to your doctor

We recommend our own branded cleaning agent, which can be purchased through your retailer. If you wish to use an alternative product, it is advisable to test a small non visible area first, and then only treat the stained area.

• DO NOT USE wax furniture polish, abrasive or aggressive cleaners, bleach or hypochlo-rate (chlorine) based cleaners, multi-purpose cleaners, dilutes, acetone, alcohol, solvent or similar products.

2

3

1

4

2

3

5

5

6

6

6

6

Components - PanelsPlease check you have all the panels listed below

4

Conformat x 12

Bumper x 2

clip hinge x 4 cover x 4 hinge mounting plate x 4

A

E

Wooden dowel x 22

B

4MAx23 Screw x 4

6MAx30 Screw x 2

27mm x 4

C

I

O

Note: The quantities below are the correct amount to complete the assembly. In some cases morefittings may be supplied than are required.

F

D

K L

G

J

M N

RP Q

15mm Screw x 12 35mm Screw x 24 x 1

H

SO

LD S

EP

AR

ATL

Y

Components -

Choose Mounting Method:

FittingsPlease check you have all the fittings listed below

Supportfoot x 4

Wedgefix dowel x 8Wedgefix housing x 8

Hanger railsupport x 2

30mm Screw x 8

hanging rail x 1

RecommendedNOT SUPPLIED

Wood Glue

STEP 1 STEP 6

Horizontal Vertical4.6 M floor clearance required 2.34 M ceiling height clearance required

5

Step 1

KK

I

B

B

4

B

B

x4

226cm 455cm

For back panel insertio

n

6

K

1

2

WoodGlue

Wood Glue not supplied

WoodGlue

WoodGlue

WoodGlue

Assembly Instructions Horizontal Wardrobe Assembly

6

structionsStep 2

Step 3

A

A

A

1

Back Edge – Location

of foil joint

2

4

4

A

A

A2

4

WoodGlue

WoodGlue

WoodGlue

WoodGlue

WoodGlue

WoodGlue

Wood Glue not supplied

Wood Glue not supplied

Raw on the back

Assembly Instructions Horizontal Wardrobe Assembly

6

6

6

6

7

Step 4

Step 5

3

H

H

H

11 H

45

3

STEP 10

Assembly Instructions Back panel insertion

8

structionsStep 6

A

A

A

A

1

6

6

6

6

Wood Glue not supplied

WoodGlue

WoodGlue

WoodGlue

Assembly Instructions Vertical Wardrobe Assembly

9

Step 7

3

Assembly Instructions Vertical Assembly Back Panel Insertion

10

structionsStep 8

4A

Glue

4

Back Edge – Location of foil joint

Assembly Instructions Vertical Assembly Top/Side Panel Insertion

11

structionsStep 9

2

A

A

A

H H HH

11

HH H H

45

WoodGlue

WoodGlue

WoodGlue

Wood Glue not supplied

Assembly Instructions Vertical Assembly Top/Side Panel Insertion

12

Step 10

L

To level your wardrobe adjust the feet by turning clockwise to lower or anticlockwise to rise.

Assembly Instructions Height Adjustability

13

Step 11

Assembly Instructions Connecting Wardrobes

Ø5mm35mm

F

G

14

Step 12

Assembly Instructions Wall Fixing

4

3

4

3

wall fittings and screws

not included

15

Step 13

Decor cutting

Decor position

Skirting profile

J

J

J

J

Thickness of skirting

Heightofskirting

25m

m

650

mm 35

mm

Ø5

Assembly Instructions Decor End Fixing

We recommend the use of a slave strip of board when cutting the panel. This will prevent breaking out of the board

material and foil. I twill also reduce the likehood of “lifting” of the foil should a coarse blade be used.

16

Step 14

Assembly Instructions Fitting Optional Plinth

Wood Glue not supplied

WoodGlue

no end panel required when

fitting more than

one robe unit

Ø5

J

J

J

45°

45°

17

Step 15

J

Door

J

Door

J

Door

J

Door

Assembly Instructions Fitting Optional Cornice

Wood Glue not supplied

J

J

J

45°45°

WoodGlue

18

Step 16

Step 17

Front

Back Edge – Location of foil joint

Assembly Instructions Fixing In Base Panel

5

C

C

DD

D

D

x2

5

5

19

Step 18

5

5

M

M

N

N

Ø8mm

Ø8mm

Assembly Instructions Hanging Rail Brackets

20

Step 19

Assembly Instructions Hanging Rail And Shelf Positioning

I

I

M

M

O

A

B

5

5

O

D

D

D

D

Shelves require a

firm “click” into place

21

Step 20

R

R

R

R

P

P

P

PR

R

R

R

P

P

P

P

RP

R

P

CLASSIC

MODERN

Assembly Instructions Application Of Hinges To Door

E

E

E

E

E

E

22

Step 21

not used

not used

Classic

Modern

Assembly Instructions Hanging Of Doors

23

Step 22

Soft closing

Apply hinge plate cover

Step 23

Step 24

Off On

Q

Assembly Instructions Door Adjustment

PUSH LATCH: deactivate soft close mechanism when applying a push-latch.

24