Operating Instruction

SINGLE STAGE CRUSHERSINGLE STAGE CRUSHER

WinnerMac Heavy Machinery Co., Ltd.

1. It simplifies the production process and the

original two-stage or three-stage crushing can

be reduced to one stage.

2. The operational cost is low; the matched

power of the system is mall and the production

cost is greatly reduced.

The Description and Function of Single Stage Crusher:

This single-stage crusher can crush the mined

large-sized ores to the granularity of an average

of 5mm for only one time, and it is the ideal

product for replacing traditional two-stage and

three-stage crushing method, thus simplifying

the production process and saving infrastructure

investment and production cost.

The Performance Characteristics of Single Stage Crusher:

1. It is big crushing ratio and the maximum

feeding granularity can reach 1.3-1.5m.

2. The discharging granularity can be adjusted

in the ranges of 3-150mm.

3. The discharging materials are fine has good

shape, and the content of powder-shaped

materials is below 20%.

Features

Characteristics:

Processing ability: 100–420 t/h

Feeding granularity: ≤800–≤1250 mm

Product granularity: ＜3–8 mm

Power: 160–630 kw

Applied material: limestone, shale, gypsum, coal.

Working principle:

Technical data:

The materials go into the crushing chamber and

stack on the middle bracket specially designed

in the machine, and the hammer runs in the gap

between the middle bracket, and the materials

will be continuously crushed and then fall down.

The fell small materials will be further crushed

ModelRotor

diameterFeeding size

(mm)Power(kw)

DPC140

Single Rotor

1400 ≤800

≤1000

≤1250

<3-8

100-140 160-220

280-355

500-630

150-240

330-420

1600

2000

DPC160

DPC200

TypeProduct Size

(mm)Capacity

(t/h)

by the hammer running with high speed and

finally discharged after being screened by the

arc grating plate.

Pre-sale services: enthusiasm

Sale services: servant

After-sale services: faithfulness

We provide you with the prophase plan, process flow design and manufacturer equipment according to your special demand.

Send technicians to the jobsite for guiding the installation and adjustment, training operators and finishing the check and accept together with you.

To establish long term friendship, we will regularly pay return visit to customers.Supplying technique, building design, instruction, installation