Single Shell Roto Louvre Dryer Package Mfg: Model: …Single Shell Rotary Louvre Dryer Package....
12
Single Shell Roto Louvre Dryer Package Mfg: Model: Stock No: SGMPM046.115 Serial No: Single Shell Rotary Louvre Dryer Package. Roto-Louvre Dryers are used to dry or roast products for the food, chemical or mineral industries. This Roto-Louvre Dryer was installed with General Mills Foods in Plymouth, Minnesota. Dryer and components materials of construction include: stainless steel, mild carbon steel, painted steel, and painted insulation over mild steel for ductwork. Package includes: • Roto louvre dryer. Overall dryer dimensions: 19 ft. 7 in. L x 3 ft. 9-1/2 in. ID (4 ft 1 in. OD) • Connecting piece (mild carbon steel):(3) 6 in. flanged outlets, (1) 8 in. flanged outlet. Overall dimensions: 5 ft. 5 in. L x 2 ft. 4 in. W x 4 ft. 7 in. H • Steam coil duct with two aluminum coils of approximate dimensions: 5 ft. L x 5 in. W. x 3 ft. in. H. Duct has 2 access manways with 2 in. inlet/outlet(s) for each coil. Duct Inlet: 4 ft. 8-1/2 in. L x 2 ft. 8 in. H., and outlet 15 in. L x 12 in. H. Overall dimensions: 12 ft. 5 in. L x 5 ft. 9 in. W x 3 ft. 4 in. • Connecting duct: 48 in. diameter inlet and 54 in L x 29 in. w outlet. Overall length 87 in. • Stainless steel GRC isometric product chamber, model M6-53. Front inlet: 55 in. diameter, top inlet 18 in. diameter, pressure sealed inlet with sight glass : 24 in. 5 and 8 in. bottom outlets. Overall dimensions: 71 in. L x 52 in. w. x 112 in. H. • General Mills control panel overall dimensions: 6 ft. 6 in. x 1 ft. 11 in. x 7 ft. 4 in. • Reeves® MAS 51 drive: size 462, 10 HP, gear ratio: 31.4, respective maximum and minimum output speeds: 100 and 20 RPM. Overall dimensions: 5 ft. 11 x 2 ft. 4 in. x 3 ft. 7 in. • New York Blower Company exhaust fan with US Electrical Unimount® 125, 10 hp, 1755 RPM, 208-230/460V, 60Hz, 3 phase. Outlet: 12 in. L x 15 in. H. Overall dimensions: 3 ft.10 in. x 4 ft. 3 in. x 6 ft. H. • The Boeddecker Co. Blower. Customer # P0004514. Model # G1-20 size 264 / 10 HP. S/N: 92063. Project : 3278. Mark: 3115. Other features include: Special structural plate louvers and flights, anti-friction trunnion and thrust rollers with steel supporting bases, carbon steel painted supports and various valves and attachments as pictured.
Transcript of Single Shell Roto Louvre Dryer Package Mfg: Model: …Single Shell Rotary Louvre Dryer Package....
Single Shell Roto Louvre Dryer Package
Mfg: Model:
Stock No: SGMPM046.115 Serial No: Single Shell Rotary Louvre Dryer Package. Roto-Louvre Dryers are used to dry or roast products for the food, chemical or mineral industries. This Roto-Louvre Dryer was installed with General Mills Foods in Plymouth, Minnesota. Dryer and components materials of construction include: stainless steel, mild carbon steel, painted steel, and painted insulation over mild steel for ductwork. Package includes:
• Roto louvre dryer. Overall dryer dimensions: 19 ft. 7 in. L x 3 ft. 9-1/2 in. ID (4 ft 1 in. OD)
• Connecting piece (mild carbon steel):(3) 6 in. flanged outlets, (1) 8 in. flanged outlet. Overall dimensions: 5 ft. 5 in. L x 2 ft. 4 in. W x 4 ft. 7 in. H
• Steam coil duct with two aluminum coils of approximate dimensions: 5 ft. L x 5 in. W. x 3 ft. in. H. Duct has 2 access manways with 2 in. inlet/outlet(s) for each coil. Duct Inlet: 4 ft. 8-1/2 in. L x 2 ft. 8 in. H., and outlet 15 in. L x 12 in. H. Overall dimensions: 12 ft. 5 in. L x 5 ft. 9 in. W x 3 ft. 4 in.
• Connecting duct: 48 in. diameter inlet and 54 in L x 29 in. w outlet. Overall length 87 in.
• Stainless steel GRC isometric product chamber, model M6-53. Front inlet: 55 in. diameter, top inlet 18 in. diameter, pressure sealed inlet with sight glass : 24 in. 5 and 8 in. bottom outlets. Overall dimensions: 71 in. L x 52 in. w. x 112 in. H.
• General Mills control panel overall dimensions: 6 ft. 6 in. x 1 ft. 11 in. x 7 ft. 4 in.
• Reeves® MAS 51 drive: size 462, 10 HP, gear ratio: 31.4, respective maximum and minimum output speeds: 100 and 20 RPM. Overall dimensions: 5 ft. 11 x 2 ft. 4 in. x 3 ft. 7 in.
• New York Blower Company exhaust fan with US Electrical Unimount® 125, 10 hp, 1755 RPM, 208-230/460V, 60Hz, 3 phase. Outlet: 12 in. L x 15 in. H. Overall dimensions: 3 ft.10 in. x 4 ft. 3 in. x 6 ft. H.
• The Boeddecker Co. Blower. Customer # P0004514. Model # G1-20 size 264 / 10 HP. S/N: 92063. Project : 3278. Mark: 3115.
Other features include: Special structural plate louvers and flights, anti-friction trunnion and thrust rollers with steel supporting bases, carbon steel painted supports and various valves and attachments as pictured.
