Simply the best water soften er - Net Metering - Water Filters · When you buy one North Star ®...

Simply the best water softener

World’s largest producer

Best for:

Intelligence

It suits the user's needs while always ensuring the best performance.

Operation with regenerative level variable, allows the North Star® softener resin to adapt to

user needs and take advantage according to three different saturation levels, ensuring

maximum efficiency. Also, consumption of salt and water is considerably lower than those of

conventional plants.

When you buy one North Star® water softener is as if you buy three!

Simplicity

Easy to install, easy to use!

Just press two buttons to start.

The North Star® water softener can be installed very quickly by setting only two parameters:

time and water hardness, simplifying the work of professionals.

It is easy to use because it is fully automatic.

Savings

Consumes half the water and salt than the average of competing products

The computer calculation of water requirements allows you to use only water and salt strictly

when necessary.

Operation with vat dry salt: the brine is prepared only at the time of regeneration.

Purity

It does not use polyphosphates for good and really clean water.

Thanks to its flexibility, North Star® water softener is always able to provide softened water,

and does not require costly bypass valves of polyphosphate dosing to hide the scale. North

Star® does not hide it, take it off!

Even for pure water to drink!

Reliability

The only designed, manufactured and assembled entirely in USA for

durability.

The number of components is minimized to ensure durability and reliability: the North Star®

water softener has up to 70% fewer parts than a conventional system, offering high

performance with maximum simplicity.

Why install a water softener?

The problems caused by hard water:

· Energy costs for heating

· Higher costs of repair and maintenance of plant

· Skin, hair and clothing not really clean

· Skin irritation

· Greater consumption of detergents and cleaners

Limestone deposits in bathtubs and showers, sinks and taps, creating unsightly stains.

Less clear, but with a more negative impact, it can obstruct pipes, boilers and water heaters,

reducing efficiency and increasing energy costs. Also the maintenance of the scale can

cause early damage on the operation of facilities.

Yet that's not all: the hard water causes calcium and gypsum to deposit on skin and clothing,

therefore prevents washing. Also, besides provoking the risk of irritation, hard water requires

the use of a greater quantity of detergents and cleaners.

The benefits of using a water softener

The use of a softener helps to avoid the following problems, with obvious advantages:

ü Save up to 25% on energy costs

ü Reduction of costs for repairs and maintenance

ü No stain scale on faucets, pots, showers, etc.

ü Stop the calcification of pipes and household appliances

ü Up to 50% less consumption of shampoos, detergents and cleaners

ü Better cleaning and feeling of well-being for children and adults

ü Long life of clothing and improved hygiene

ü Prevention of proliferation of bacteria, therefore clean pipes

ü Amortization of the cost in two - four years

Simplicity and efficiency...

...are the strengths of North Star®. Our valve can be removed with bare hands in a few

steps, and built in plastic supply certified and is made from 30% fewer parts than

conventional valves. The valve is mounted directly on the rotor without the use of

mechanical connections.

Simplicity...

...in programming: our electronics are extremely innovative, and just as easy to program. In

a few seconds and by pressing two buttons, the system is up and running. There is no need

to perform tests and special procedures.

Unique technology in regenerative level variable resins...

...the plant is able to use resins with different levels regenerative, based on consumption

detected by the electronics, and allows to offer a plant always in line with the needs of the

customer ensuring power reductions up to -47% of salt and up to -50% of water.

The flexibility of our system offers important benefits to our customers:

· The system does not require costly pressure relief valves since the implant is always

able to respond to user requirements. Also, the finished plant costs less and is more

properly sized for the needs of the end user, providing a more intelligent solution, fair

and ecological.

· The implant provided does not need dosage of chemicals to mask the presence of

lime scale in the water: with our plant, the limestone is not hidden, but eliminated;

· Our customers do not have to keep complex ranges in stock, but very few codes

which can handle all the needs of the market.

Efficiency...

...proportional counter current regeneration of resins for optimum regeneration and depth of

the filter material, the salt tank runs dry (it is filled only at the time of regeneration) preventing

the formation of salt bridges and preventing water spillage.

Security...

...the complete supply bypass and chlorine generator for a quality certified supply system,

are fully certified and meet the Italian regulations in force.

Compact and modern design...

...of our system with cab, strong an identity, different from the usual assembled.

Softeners Cabin NSC11 ED . NSC14 ED . NSC17 ED Up to 47% savings on salt

Up to 50% savings on water

TECHNICAL

CHARACTERISTICS

NCS11 NCS14 NCS17

Exchange capacity @ Salt

Consumption (°Fm3@kg)

[email protected] [email protected] [email protected]



Resin content (litres) 10.5 14.5 17.5

Attacks (inches) 1 1 1

Nominal flow (m3/h) 0.9 1.4 1.6

Pressure drop (bar) @ nominal

(m3/h)


Short range peak (m3/h) @ 1

bar pressure drop

2.0 2.0 2.1

Salt container capacity (kg) 35 50 70

Pressure (min. / max. bar) 1.4-8.6 1.4-8.6 1.4-8.6

Temperature (min. / max. °C) 4-49 4-49 4-49

Power supply 220-24V 220-24V 220-24V

DIMENSIONS

Note: Consider the depth of the by-pass: +8 cm

Bypass 1'' with mixing water hardness

Softeners Cabin NSC11 ED . NSC14 ED . NSC17 ED

Ø Softener with automatic mono-bloc ion exchange and volumetric regeneration

proportional counter

Ø Advanced electronics

Ø Complete system of self-disinfection of the resins, by-pass with mixer for adjusting

hardness and safety float.

Ø Regeneration performed mandatory minimum every 4 days, usable for water

techniques, process and drinking, and to conform to DM43/90 DM174/04.

ELECTRONIC ED - Electronic Demand

Standard LCD display

Quick setup: Just set the time and hardness

The display shows: time, hardness and regeneration time

Diagnostics: electronic diagnosis, days of operation, total number of regenerations,

turbine control and monitoring micro-switch

1. Entry of water duct

2. Counter

3. Control valve non-return

4. Drawing water softened (garden)

5. Filter

6. Softener

7. Discharge

8. Discharge

9. Any tap analysis

Softeners Cabin NSC30 UD . NSCA40 UD Up to 47% savings on salt

Up to 50% savings on water

TECHNICAL CHARACTERISTICS NCS30 NCSA40 Exchange capacity @ Salt Consumption

(°Fm3@kg)

[email protected] [email protected]



Resin content (litres) 22.6 30.6

Attacks (inches) 1 1-1/4

Nominal flow (m3/h) 1.8 2.3

Pressure drop (bar) @ nominal (m3/h) [email protected] [email protected]

Short range peak (m3/h) @ 1 bar

pressure drop

2.2 2.4

Salt container capacity (kg) 105 100

Pressure (min. / max. bar) 1.4-8.6 1.4-8.6

Temperature (min. / max. °C) 4-49 4-49

Power supply 220-24V 220-24V

DIMENSIONS

Consider the depth of the by-pass:

+8 cm for water softeners 1'',

+10 cm for water softeners 1'' 1/4.

Bypass 1'' with mixing water hardness Bypass 1'' 1/4 with mixing water hardness

Softeners Cabin NSC30 UD . NSCA40 UD

NORTH STAR NSC 30UD:



Ø Advanced electronics





NORTH STAR NSCA 40UD:



Ø High flow valve 1'' ¼ & advanced electronics





ELECTRONIC UD - Ultra Demand

Backlit LCD display - easy to read

Perfect for basements or dimly lit locations

Quick setup: Just set the time and hardness

The display shows: time, hardness, hours of regeneration,

percentage residual capacity, transport capacity, total daily intake, and average daily

consumption.

Diagnostics: Self-diagnosis electronics, days of operation,

total number of regenerations, control, and turbine control switches.

1. Entry of water duct

2. Counter

3. Control valve non-return

4. Drawing water softened (garden)

5. Filter

6. Softener

7. Discharge

8. Discharge

9. Any tap analysis

5000 SERIES Volumetric Water Softeners

5050 simplex . 5070 simplex

5100 simplex . 5130 simplex

1’’ Softener Single Disk Simplex

P

ag

e 1

0

5050 s

imp

lex . 5

070 s

imp

lex . 5

100 s

imp

lex . 5

130 s

imp

lex

1’’

Soft

ener

Sin

gle

Dis

k S

imple

x


5070 duplex . 5100 duplex . 5130 duplex

1’’ Softener Single Disk Duplex

5000 series softeners are made with high quality components.

These devices are used for both condos

and for industrial plants.

TECHNICAL

CHARACTERISTICS

5070 duplex 5100 duplex 5130 duplex

Resins 2x57 2x85 2x113

Cylinder (øxh) 12’’x54’’ 17’’x58’’ 17’’x58’’

Salt tank (litres) 400 500 500

Salt tank capacity (kg) 317 454 454

Attacks (inches) 1’’ 1/4 1’’ 1/4 1’’ 1/4

Salt Consumption / Litre Resin Exchange capacity (m3°f) @Salt

Consumption (kg) – per column

0.064 kg [email protected] [email protected] [email protected]





Hourly capacity recommended Pressure drop (bar) – per column

1.14 m3/h 0.20 ΔP 0.10 ΔP 0.10 ΔP

2.27 m3/h 0.50 ΔP 0.29 ΔP 0.30 ΔP

3.41 m3/h 0.90 ΔP 0.55 ΔP 0.60 ΔP

4.54 m3/h 1.40 ΔP 0.90 ΔP 0.97 ΔP

5.68 m3/h 1.97 ΔP 1.30 ΔP 1.40 ΔP

6.81 m3/h 2.64 ΔP 1.80 ΔP 1.95 ΔP

7.95 m3/h - 2.40 ΔP 2.60 ΔP

Continuous flow Intermittent or peak flow Not recommended flow


5070 duplex . 5100 duplex . 5130 duplex:

Ø CUC's exclusive controller can handle up to 4 cylinders of resin

Ø Proportional brine

Ø Counter-current regeneration

Ø Automatic bypass during regeneration

Ø Based on quartz under resins

Ø Modular upgradeable over time

Ø Capacity up to 14 m3/hr

Ø Planning to use alternate or parallel

Ø Bottom diffuser and diffuser in self-cleaning valve

Ø Salt tank very large

Ø Cylinder made of reinforced fibreglass

Ø 24V AC transformer

A Ø

cylinder

B h

cylinder

C h

attacks

D h

total

E h salt tank

F Ø salt tank

G mm (1)

H distance

5070 DUPLEX

12’’ 54’’ 1475mm 1620mm 1250mm 700mm 1585mm 96.5mm

5100 DUPLEX 17’’ 58’’ 1588mm 1734mm 1190mm 815mm 1970mm 96.5mm

5130 DUPLEX 17’’ 58’’ 1588mm 1734mm 1190mm 815mm 1970mm 96.5mm

(1) Includes 155 mm between the two columns

*Note: The plants are supplied with connection 1'' 1/4 M brass.

By-pass kit with mixing screw hardness and disinfection system must be ordered separately (2 x each

plant).

DIMENSIONS

Simply the best water soften er - Net Metering - Water Filters · When you buy one North Star ®...

Documents

Transcript of Simply the best water soften er - Net Metering - Water Filters · When you buy one North Star ®...