Simplification of data acquisition in process integration ...€¦ · 2.2 Pinch Analysis data...
Transcript of Simplification of data acquisition in process integration ...€¦ · 2.2 Pinch Analysis data...
General rights Copyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights.
Users may download and print one copy of any publication from the public portal for the purpose of private study or research.
You may not further distribute the material or use it for any profit-making activity or commercial gain
You may freely distribute the URL identifying the publication in the public portal If you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediately and investigate your claim.
Downloaded from orbit.dtu.dk on: May 28, 2020
Simplification of data acquisition in process integration retrofit of a milk powderproduction facility
Bergamini, Riccardo; Nguyen, Tuong-Van; Bellemo, Lorenzo; Elmegaard, Brian
Published in:Chemical engineering transactions
Link to article, DOI:10.3303/CET1976072
Publication date:2019
Document VersionPublisher's PDF, also known as Version of record
Link back to DTU Orbit
Citation (APA):Bergamini, R., Nguyen, T-V., Bellemo, L., & Elmegaard, B. (2019). Simplification of data acquisition in processintegration retrofit of a milk powder production facility. Chemical engineering transactions, 76, 427-432.https://doi.org/10.3303/CET1976072
CHEMICAL ENGINEERING TRANSACTIONS
VOL. 76, 2019
A publication of
The Italian Association of Chemical Engineering Online at www.aidic.it/cet
Guest Editors: Petar S. Varbanov, Timothy G. Walmsley, Jiří J. Klemeš, Panos Seferlis
Copyright © 2019, AIDIC Servizi S.r.l. ISBN 978-88-95608-73-0; ISSN 2283-9216
Simplification of Data Acquisition in Process Integration
Retrofit of a Milk Powder Production Facility
Riccardo Bergaminia,*, Tuong-Van Nguyena,b, Lorenzo Bellemoc, Brian Elmegaarda
aTechnical University of Denmark (DTU), Dep. of Mechanical Engineering, Nils Koppels Allé, 2800 Kgs. Lyngby, Denmark bÉcole polytechnique fédérale de Lausanne (EPFL), Industrial Process and Energy Systems Engineering Group, Rue de
l'Industrie 17, 1951 Sion, Switzerland cGEA Process Engineering A/S, Gladsaxevej 305, 2860 Søborg, Denmark
Process integration techniques, such as Pinch Analysis, can be used to effectively detect energy saving
opportunities in the industrial sector. However, their application is mainly limited to energy-intensive processes,
leaving a large potential untapped in the remaining industrial sectors. One factor that discourages the application
of these tools is the requirement of a large amount of reliable data, which may be difficult or time-consuming to
gather. This paper presents the application of a method to simplify the data acquisition step of process
integration studies on a milk powder production facility. By employing uncertainty analysis and sensitivity
analysis techniques, the solution of the factor fixing problem was shown, and a subset of parameters whose
accurate estimates were essential to obtain reliable analysis results, were detected. The required data reduction
was significant, as only 20 out of the 41 parameters initially considered were deemed to be important. Moreover,
the maximum acceptable level of inaccuracy in the definition of these parameters in order to ensure a
satisfactory uncertainty level in the analysis output was presented. The output standard deviation was reduced
from the initial 47.8 % to 10.0 %, relative to the mean value.
1. Introduction
Process integration (PI) techniques have been shown to be effective in identifying energy saving opportunities
in several industrial sectors (Kemp, 2007). However, despite their proficiency, they are rarely utilized and far
from constituting the common industrial practice. This is especially true for non-energy intensive industries,
which are often reluctant in investing in energy analyses and energy saving measures (Kimura et al., 2015)
because of the significant time demand (order of weeks) and financial investment required to collect all required
measurements and process data (Klemeš and Varbanov, 2010). Few authors tried to address this issue by
acknowledging data acquisition as a critical step in PI studies. Muller et al. (2007) proposed to first apply a top-
down approach to identify the major energy users based on energy bills, followed by a bottom-up one used for
the detailed modeling of the simplified process. The validity of the method was illustrated by a case study, but
a large amount of data was still required, as a thorough characterization of the most consuming sections of the
plant was necessary. Pouransari et al. (2014) showed that it is possible to retrieve data at different detail levels
without compromising the validity of the conclusions drawn by a PI analysis. However, they did not propose
criteria able to identify the required detail level beforehand. Kantor et al. (2018) developed a method for
constructing thermal profiles of specific processes based on a database of generic sub-process data. This
method is still in the development stage, and its accuracy for representing operation of entire plants is yet to be
proven. Finally, a list of generic issues encountered in the data acquisition step of PI analysis and advice for its
successful completion was presented by Klemeš and Varbanov (2010).
This paper presents the application of a recently developed data acquisition simplification method (Bergamini
et al., 2019) on a dairy facility producing milk powder. Based on roughly estimated process data, uncertainty
analysis and sensitivity analysis were used to identify the parameters (e.g. temperature, flow rates) that have
minor impact on the final results and their uncertainties. This problem, named the factor fixing problem (Saltelli
et al., 2008), aims at determining the parameters that can, therefore, be fixed to any value in their uncertainty
range and can be overlooked during the detailed data acquisition phase.
DOI: 10.3303/CET1976072
Paper Received: 06/04/2019; Revised: 12/06/2019; Accepted: 12/06/2019 Please cite this article as: Bergamini R., Nguyen T.-V., Bellemo L., Elmegaard B., 2019, Simplification of Data Acquisition in Process Integration Retrofit of a Milk Powder Production Facility, Chemical Engineering Transactions, 76, 427-432 DOI:10.3303/CET1976072
427
Figure 1: Case study process layout, parameter positions and resulting sensitive parameters (circled in red)
428
Moreover, the applied method identifies the precision with which the influencing parameters need to be acquired
in order to achieve satisfactorily reliable results in the energy targeting procedure of Pinch Analysis. In this way,
the analyst is provided with a tool that is able to systematically identify the important parameters to be measured
and the precision with which this operation should be performed. All this is done before allocating time in
collecting a large number of possibly important data.
2. Method
2.1 Process description and modeling
The analyzed process is from a milk powder production facility located in northern Europe. The process
flowsheet is presented in Figure 1. The powder production rate at full capacity is estimated to be 4,500 kg/h,
corresponding to a heating demand of around 4,000 kW, presently supplied mainly by steam. The production
line consists of four sub-processes: (i) milk pasteurization, (ii) evaporation, (iv) concentrate heating and (iv)
drying. Fresh milk with 13 % Total Solids (TS) content enters the line at around 6 °C and is heated up to 90 °C
using seven steam heaters in series. It is then concentrated to around 50 % TS across a four-stage evaporation
line equipped with Thermal Vapor Recompression. After being re-heated to 75 °C, it undergoes the final drying
step in a spray dryer where it is dried up to around 97 % TS, and it is then sent to packaging. Some degree of
process integration is already implemented, as a share of the heat available in the warm condensate leaving
the evaporator is used to preheat the fresh air supplied to the spray dryer. Cooling towers are used to satisfy
most of the cooling demand, required by the remaining condensate cooling from the evaporators.
The process was modeled based on process flow diagrams. It included mass and energy balances for the 24
components in the plant. No possibilities for modifying the existing separation system were considered of
interest, and hence the evaporation line and the spray dryer were assumed to have a fixed configuration. 41
parameters were identified as necessary for describing the system from an energy perspective (Figure 1). Out
of these 41 parameters, 34 were measured, consisting of (i) 21 temperature, (ii) 9 volume flow rate, (iii) 1 density.
The remaining 10 parameters were assumed from knowledge provided by the plant operators and designers.
They consisted of (i) 4 temperature, (ii) 1 volume flow rate, (iii) 1 density, (iv) 2 pressure, and (v) 2 component
performance data. Finally, physical system constraints were implemented in the model to ensure process
consistency under uncertain input parameters (e.g. the saturation temperature of an evaporation stage cannot
exceed the one of upstream stages). The model was coded in MATLAB® (‘MATLAB Release R2017b’, 2017).
2.2 Pinch Analysis data acquisition simplification strategy
The data acquisition simplification procedure proposed by (Bergamini et al., 2019) was applied to the case
study. It aims at reducing the time consumption in the data acquisition step of process integration studies by
employing uncertainty analysis and sensitivity analysis concepts to the well-known Pinch Analysis targeting
procedure (Kemp, 2007). The applied procedure consisted of four main steps:
1. Rough data acquisition. A model of the system was built by identifying the required input parameters. Four
outputs were defined as important, namely: (i) minimum hot utility consumption (HUmin), (ii) minimum cold
utility consumption (CUmin), (iii) energy saving potential (Esave), and (iv) actual plant hot utility consumption
(HUactual). The first two outputs resulted from the pinch energy targeting procedure, the latter output was
retrieved from the process model, and the third was calculated as the difference between (i) and (iv). The
input parameters were thereafter characterized by assigning estimated values retrieved by the plant
monitoring system during the same production day for most parameters, while the rest were assumed based
on expert consultation.
2. Uncertainty analysis. Input uncertainties were defined (see Section 2.3 for further details) and an uncertainty
analysis was performed on the model in order to estimate output uncertainties based on the rough data
acquisition. A Monte Carlo analysis (Metropolis and Ulam, 1949) with sample dimension of N=1,000 was
employed in this study. A maximum acceptable target uncertainty was defined for each output as 10 % of
its nominal value. This served for defining the maximum acceptable uncertainty (Step 4) in data retrieved
during the detailed data acquisition.
3. Sensitivity analysis. A variance decomposition-based sensitivity analysis was performed to solve the factor
fixing problem (Saltelli et al., 2008). The total sensitivity index (STi) referred to each output was calculated
for each parameter and considered for sensitivity definition (Saltelli et al., 2009). It univocally identifies all
the contributions (first and higher orders) of the i-th parameter to the output variance. A number of
simulations N = 60,000 was used.
A sensitivity threshold was set equal to STi = 0.01 and the parameters with lower impact were disregarded
for the detailed data acquisition step of the retrofit analysis.
4. Allowed uncertainty maximization. By means of a global optimization routine, the input uncertainties of the
parameters selected in Step 3 were maximized to meet the maximum acceptable output uncertainty defined
in Step 2. This served as an indication of the level of accuracy required in the detailed data acquisition step
429
and, possibly, it further reduces the number of parameters to consider for retrieving data that are more
precise. The lower bound definition for the input uncertainty is explained in Section 2.3.
2.3 Input uncertainty definition
Input uncertainty characterization is crucial for obtaining meaningful results from the previously described
method. This is far from trivial, as generally, various sources of uncertainty contribute to it, namely: (i) knowledge
uncertainty deriving from inadequate information (comprising measurement uncertainty) and faulty
assumptions, and (ii) natural variability resulting from process variations deviating from steady-state conditions
(Loucks and van Beeck, 2017). Unfortunately, such uncertainties are not known a priori, particularly when only
a rough data acquisition is performed (Step 1). Therefore, subjective evaluation must be made. For each
parameter, three different uncertainties must be defined: (i) uncertainty relative to the rough data acquired in
Step 1, (ii) minimum uncertainty, and (iii) maximum uncertainty obtainable when performing a detailed data
acquisition (Step 4).
Input uncertainties were described by means of a normal distribution, according to the work of Madron (1992).
The probability distribution was centered in the parameter nominal value (μ), while its standard deviation (σ)
was assumed based on the type of parameter to be measured, distinguishing between (i) temperature, (ii)
volume flow rate of liquid flow, (iii) volume flow rate of gaseous flow, (iv) density, and (v) other. The standard
deviation of the roughly estimated parameters was set to high values according to what was recommended by
Bergamini et al. (2019). The maximum standard deviation obtainable when performing a detailed data
acquisition was set to the same value as the rough ones, corresponding to the situation in which no detailed
data acquisition was performed. Finally, the minimum obtainable uncertainty was set according to the minimum
inaccuracy of marketed measurement sensors, as reported by Liptak (2003). These were either defined as (i)
absolute values (ABS), (ii) relative to reading (RE), or (iii) relative to Full Scale (FS). For the latter, the full scale
of unknown sensors was assumed to be three times the read value. The adopted standard deviations are listed
in Table 1.
Table 1: Parameter uncertainty definition
Parameter type Rough data σ (reference) Maximum σ (reference) Minimum σ (reference)
Temperature 3 K (ABS) 3 K (ABS) 0.1 K (ABS)
Volume flow rate, liquid 10 % (RE) 10 % (RE) 0.1 % (RE)
Volume flow rate, gas 10 % (RE) 10 % (RE) 1 % (FS)
Density 10 % (RE) 10 % (RE) 1 kg/m3 (ABS)
Others 10 % (RE) 10 % (RE) 1 % (RE)
3. Results and discussion
3.1 Uncertainty analysis
The uncertainty propagation by means of Monte Carlo analysis resulted, as expected, in high uncertainties,
ranging from 8.5 % to 47.8 % of the output average value (Table 2). These values where well above the set limit
of 10 %, hence a more detailed data acquisition was deemed necessary and the simplification procedure was
continued.
3.2 Sensitivity analysis
Figure 2 presents, for each output, the total sensitivity indexes of the 41 parameters sorted in descending order.
As it can be noted, a limited number of parameters was deemed influencing for the output variance, specifically:
7 parameters for HUmin (a), 10 parameters for CUmin (b), 17 parameters for Esave (c), and 6 parameters for HUactual
(d). Moreover, it is shown that for all the outputs the parameters STi decreased rapidly in the first few parameters,
while it flattened for the remaining ones. For all the outputs, the chosen cut-off threshold (shown in dashed line)
was able to detect this flattening behavior. The resulting most influencing parameters for the four selected
outputs was 20, which constitutes a significant decrease from the initial 41 parameters. The 20 most influencing
parameters are highlighted with red circles in Figure 1. Referring to the maximum STi calculated for each input,
430
Figure 2: Total sensitivity index of the k = 41 parameters on the outputs, sorted in descending order. (a) HUmin,
(b) CUmin, (c) Esave, (d) HUactual
precise measurements/estimates of the fresh milk and concentrate properties were observed fundamental (0.03
≤ STi ≤ 0.30) altogether to the temperature after the recuperative preheating stage (STi = 0.13). Moreover, only
the saturation temperatures of the first (STi = 0.16) and last (STi = 0.04) evaporation stages were important,
concerning the evaporation section, while intermediate stages and ejector parameters resulted to be of
secondary importance. Concerning the spray dryer, inlet (STi = 0.29) and outlet (STi = 0.07) air temperatures
were of concern, while only volume flow rate (STi = 0.32) and temperature (STi = 0.01) of the main air stream
and volume flow rate (STi = 0.02) of the static fluid bed airflow were identified as relevant. The rest of the stream
properties did not have a significant impact on the results precision. Finally, temperature (STi = 0.02) and flow
rate (STi = 0.02) of the condensate heat recovery system resulted to be fundamental to determine the actual
energy savings potential accurately. These values, in particular, were not monitored with precision in the plant,
as they are not paramount for controlling the plant production. On the contrary, this analysis shows that their
careful monitoring would be beneficial when the plant energy performance is of interest.
3.3 Allowed uncertainty maximization
At first, the uncertainty analysis was repeated, setting the uncertainty of the selected 20 parameters to their
lower limit and keeping the rest to the initial values. This identified the potential minimum uncertainty achievable
by precisely monitoring all the selected parameters. The results (Table 2) showed that the output uncertainty
would be significantly reduced in this case, falling below the minimum requirement of 10 %. Thereafter, the
required parameter uncertainty was maximized in order to reach the necessary 10 % output accuracy. The
resulting final uncertainty is presented in Table 2, while the parameters uncertainty reduction required with
respect to the rough data uncertainty is shown in Figure 3. From the latter it is clear how not all the 20 selected
parameters needed to be assessed with extremely high precision. On the contrary, 7 of them (parameter 10,
12, 13, 16, 17, 18, 19 in the figure) required only a slight uncertainty reduction. This shows the possibility to
allow a little increase in output uncertainty in order to overlook these parameters in the detailed data acquisition
phase, in addition to the ones selected in Step 3 of the procedure. This would further reduce the number of
important parameters to 13.
Table 2: Output uncertainty calculation, using (a) rough data, (b) minimum uncertainty on the 20 selected
parameters, (c) maximized uncertainty on the 20 selected parameters
Output (a) (b) (c)
Absolute Relative to μ Absolute Relative to μ Absolute Relative to μ
HUmin 279 kW 8.72 % 59 kW 1.83 % 80 kW 2.49 %
CUmin 257 kW 47.80 % 33 kW 6.13 % 54 kW 10.00 %
HUactual 83 kW 14.56 % 16 kW 2.77 % 47 kW 8.33 %
Esave 321 kW 8.50 % 67 kW 1.77 % 87 kW 2.30 %
431
Figure 3: Target parameters uncertainty, relative to the initially estimated values, for the 20 selected parameters
4. Conclusions
This paper presents the application of a recently developed data simplification technique for process integration
retrofit projects on a milk powder production plant. The method was shown to be able to reduce the number of
parameters to be considered during the detailed data acquisition phase significantly by identifying 20 parameters
of paramount importance out of the initial 41. This was achieved by applying a systematic procedure requiring
only roughly estimated data to be performed, potentially achieving a significant reduction in time use during the
data acquisition stage. In this way, the output standard deviation was reduced from the initial 47.8 % to the
desired level of 10.0 %, relative to the mean value. Moreover, the method was shown to be able to identify the
maximum allowed inaccuracy in the data acquisition on the reduced sub-set of parameters in order to achieve
a required level of accuracy in the analysis outcome. The results suggested the possibility to further reduce the
parameters of paramount importance to 13. This could serve as a reference for planning the measurement
campaign to be performed in the detailed data acquisition phase, and for recommending the placement of
permanent sensors aimed at improving the plant monitoring system. This possible use should be further
investigated in future research, and the impact of the assumptions made in the uncertainty characterization
should be assessed, establishing the robustness of the developed method.
References
Bergamini R., Nguyen T-V., Elmegaard, B. (submitted to Frontiers in Energy Research 2019), Simplification of
data acquisition in Process Integration retrofit studies based on uncertainty and sensitivity analysis.
Kantor I., Santecchia A., Wallerand A.S., Kermani M., Salame S., Arias S., Wolf F., Eetvelde G.V., 2018,
Thermal profile construction for energy-intensive industrial sectors, Proceedings of ECOS.
Kemp, I. C. (Ed), 2007, Pinch analysis and process integration: A user guide on process integration for the
efficient use of energy. 2nd edn. Butterworth-Heinemann. Burlington, Massachusetts (US).
Kimura O., Karlsson M., Cornelis E., Paramonova S., Thollander P., Morales I., Pablo J., Navarro J., Bertelsen
C.W., 2015, IEA IETS Annex XVI Energy Efficiency in SMEs Task III: Methods and tools to achieve energy
efficiency in industrial SMEs.
Klemeš J.J., Varbanov P.S., 2010, Implementation and pitfalls of process integration, Chemical Engineering
Transactions, 21, 1369–1374.
Liptak B. G. (Ed), 2003, Instrument engineers’ handbook. Process measurement and analysis. 4th edn. CRC
Press.
Loucks D. P., Van Beeck E., 2017, Water resource systems planning and management. 1st edn. Edited by
UNESCO-IHE and Deltares.
Madron F., 1992, Process Plant Performance: Measurement and Data Processing for Optimization and Retrofit.
Chichester, West Sussex, England: Ellis Horwood Limited Co.
MATLAB Release R2017b’, 2017, Natick, Massachusetts (US): The MathWorks Inc.
Metropolis N., Ulam S., 1949, The Monte Carlo Method, Journal of the American Statistical Association, 44(247),
pp. 335–341.
Muller D., Maréchal F., Wolewinski T., Roux P., 2007, An energy management method for the food industry,
Applied Thermal Engineering, 27(16 SPEC. ISS.), 2677–2686.
Pouransari N., Bocquenet G., Maréchal F., 2014, Site-scale process integration and utility optimization with
multi-level energy requirement definition, Energy Conversion and Management, 85(0), pp. 774–783.
Saltelli A., Ratto M., Andres T., Campolongo F., Cariboni J., Gatelli D., Saisana M., Tarantola S., 2008, Global
Sensitivity Analysis --- The Primer, John Wiley & Sons Ltd, Chichester, UK.
Saltelli A., Annoni P., Azzini I., Campolongo F., Ratto M., Tarantola S., 2009, Variance based sensitivity analysis
of model output. Design and estimator for the total sensitivity index, Computer Physics Communications.
Elsevier B.V., 181(2), 259–270.
432