......................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................

SimpleLine 1.5, 2.5 or 3.0 DeadsideType:

1.5”, 2.5” or 3.0”

Lum

ino

us

Len

gth

pe

r Sp

ec

ifie

r

Ordering

Shipping C Ship Complete Fixture H Ship Housing and Driver L Ship LED and Lens

Series S15 Simple line LED 1.5 inch width S25 Simple line LED 2.5 inch width S30 Simple line LED 3.0 inch width

Mounting MC5 New or Cut-in construction 5/8” drywall or thicker

Lamping 1ML Standard Output LED 4.9w/ft (16w/m) (S15 limited to 1ML in DeadSide housing) 2ML High Output LED 9.8w/ft (32w/m)

Color 27 2700K, 85+ CRI 30 3000K, 85+ CRI 35 3500K, 85+ CRI

Wire Harness 1 Single

Lens W White

Driver R Remote

Start End M Mud in End S Straight End ST Straight Translucent End ALxx Angle cut Left (degrees 1° to 45°) ARxx Angle cut Right (degrees 1° to 45°)

Length xx xx is distance in inch or mm xxFC Allows housing to be field cut for exact fit (must use H shipping option)

DeadSide DLH Left side abutting hard surface or ACT ceilingPosition DRH Right side to abut hard surface or ACT ceiling& Type DLM Left side with mud lip for perpendicular drywall DRM Right side with mud lip for perpendicular drywall

Transition** LTxx Left Turn same plane (degrees 90° to 179°) RTxx Right Turn same plane (degrees 90° to 179°) (Add Lengths & Transitions to form pattern)

Finish End M Mud in End S Straight End ALxx Angle cut Left (degrees 45° to 90°) ARxx Angle cut Right (degrees 45° to 90°)

DxH Color __ Natural Anondiozed BK Black BK Bronze __ Other

Units mm mm in inches

Options CP Chicago Plenum

Environmental Data

For Standard Output lamping at 3000k: W: 4.9W/ft (16W/m) LLD: 50,000hrs @ 70%lm20ft (6M) on one 100w driver info@dadolighting.com v/f 877.323.6584Specifications and dimensions subject to change without notice. Protected under U.S. Pat. 8109659 and other patents pending.

1002

111

1201

4

Temp range: 0° ~ 90°F (-20 ~ 30°C)No Mercury, No UV, No Flicker

Warranty: 5 years

For High Output lamping at 3000k: W: 9.8W/ft (32W/m) LLD: 50,000hrs @ 70%lm10ft (3M) on one 100w driver

SimpleLine 1.5, 2.5 or 3.0 Deadside

HousingAll aluminum housing mounts just like drywall to framing and hat channel to create a monolithic heat sink. Flange lip is mudded into surface to provide a trimless installation.DeadSide has (1) straight edge for abutting hard surfaces, ACT or open surfaces; or (2) return edge with mud lip for perpendicular drywall edge. Housing ships with 15ft CL2P cable attached to reach remote power supply (feeds at “Start End” of run and every 20 feet in longer runs). For longer lengths, contractor can add 50ft of 12awg wire or consult factory. Multiple housings tab & couple together for straightness.Class 2 wiring from remote driver for easy installation & safety.ETL listed, damp location, IC rated (including polyurethane insulation). Standard SimpleLine 5/8” fixtures of same width can be integrated in same run.

Various Ends for different starting and stopping conditions:“M” when mid field“S” when against hard stops (walls, floor, baseboard)“AL” & “AR” angle cut (1° to 45°)

TransitionsWhen lens changes directions on same plane or to a 2nd plane. (Minimum length 3.875” or 98mm per side).“LT” Left Turn same plane (degrees 90° to 179°); pre-assembled at factory.“RT” Right Turn same plane (degrees 90° to 179°); pre-assembled at factory.Consult factory for inside and outside corners.

LEDLow wattage white light LED produces even distribution with no shadows.Binned within 3 MacAdam ellipses.Blending and overlap keep color and light output uniform.May select Standard or High Output versions when ordering. See companion spec sheets for RGB & RGB+W color fixtures. 1.5” width limited to standard output in DeadSide housing.

OpticsLight guide panel diffuses multiple LED sources. Panel plugs into housing via DC barrel connects & is secured with clear poly screws for quick & easy replacement. Snap-in high transmission acrylic lens, up to 24ft per section, provides a matte white finish & even distribution for a dimensionless appearance. Lens fits flush with finished wall surface. Shallow & rigid housing ensures constant lens retention along length.Modifications

Runs can be provided to the nearest 1/16” or 1mm.“FC” Field cutting option reduces lead time for perfect architectural fit Housings may be cut on-site up to 6” parallel to straigh or factory mitered end. Then LED panels are made in factory to fit installed length.For unique custom work, such as inside or outside corners and patterns, see additional spec sheet or consult factory for shop drawings.

DriverRemotely located power supply with 24Vdc Constant Voltage output for simple class 2 installation. Electronic Drivers 50/60 Hz, 120 thru 277 input. Choice of 0-10V dimming. Type A Sound Rating,Non IC installations standard; consult factory for IC installation.May be surface mounted or recessed. Housing is die formed 16ga. CRS with White painted after fabrication finish. Listed for 90°C conductors with 1⁄2” trade size Knock Outs. A single 100W driver will power 20ft of low output or 10ft of high output LED modules; additional drivers allow for infinite lengths.

Driver* R Remote

Drive Qty Per X 1, 2, 3, or x (factory determined)Power Supply (2 max. with D010 type)

Type D010 Dimming via 0-10Vdc, 100W N100 Non dim 100W

Voltage UNV Universal 120-277V

* See Power Supplies spec sheet for additional versions and details

2.65”

11.50”

13.50”

10”

REMOTE POWER SUPPLYR-XXX-UNV SERIES

(254mm)

(68mm)

(343mm)

(292mm)

12” (305mm)

Non-Dimming - R-1N100-UNV

Dimming - R-1DO10-UNV

N100(+) 24V DC

(-) 24V DCGRDNEUTRALLINE

120-277 VAC

24VDC CLASS 2 WIRING (100W MAX PER CIRCUIT)

FIELD CONNECTIONS(BY INSTALLER)

(POWER SUPPLY MAY BE MOUNTED ABOVE ACCESSIBLE CEILING)

LED MODULEIN HOUSING

CL2P CABLE(CLASS 2 PLENUM RATED, WHITE SHEATH)

LED MODULEIN HOUSING

INTERNAL FIXTURE WIRING

N100

LED MODULEIN HOUSING(+) 24V DC

(-) 24V DCCL2P CABLE(CLASS 2 PLENUM RATED, WHITE SHEATH)

GRDNEUTRALLINE

120-277 VAC

24VDC CLASS 2 WIRING (100W MAX PER CIRCUIT)

LED MODULEIN HOUSING

FIELD CONNECTIONS(BY INSTALLER)

(-) GREY (0-10V DIM)

(+) PURPLE (0-10V DIM)

+-

0-10V CONTROL/SENSOR (BY OTHERS)UL APPROVED (SINKING CONTROLLER)

DIMMER - D010

INTERNAL FIXTURE WIRING

(POWER SUPPLY MAY BE MOUNTED ABOVE ACCESSIBLE CEILING)

Cat No.: S25-MC5-2ML-35-1-W-R-S-24-S-in*Meanwell Driver No.: LPV-20-24 operating at 120vTotal Lumens: 701* Multiply all data by .50 for 1ML lamping

Photometric Data

Independent Test No. 17940.0

This is an absolute test per LM-79-08

Luminous Length: 24”Width: 2.5”

SimpleLine 1.5, 2.5 or 3.0 Deadside

Zonal Lumen Summary

Luminance Data (cd/m2)

Candlepower Distribution (cd)

1. Mount and Level Housing. Cable to Remote Power Supply. 2. Install Drywall, Tape, Mud & Finish. 3. Plug in LED Module & snap in lens.

SimpleLine 1.5, 2.5 or 3.0 Deadside

Denotes the start & power feed point of each run. Can be at either end; whichever is closest to remotepower supply. Longer runs may require additionalfeed points

(1) DeadSide (on left) abutting granite C-S30-MC5-1ML-30-1-W-R-S-xxDLH-S-in

(2) Outlining underside edge of soffit C-S25-MC5-2ML-30-1-W-R-M-xxDLM-LT90-xxDLM-S-in

(3) Vertical along inside corner C-S25-MC5-1ML-30-1-W-R-S-xxDLH-S-in

(4) Outline outside edges & bottom of wall C-S15-MC5-1ML-30-1-W-R-S-xxDLM-RT90-xxDLH-RT90-xxDLM-S-in

Notes:• Consult factory for help with applications not shown or assistance with specifying & ordering.• Shop drawings will be prepared for all patterns and straight runs upon request.

*Specify Power Supply on next page or Power Supplies sheet** Consult factory for Inside (ICxx) & Outside (OCxx) Corner transitions

(Only if lenschanges direction)

Ex. Cat #s (xx denotes lengths)

Options“CP” Chicago Plenum rated housing with two-position junction box for attachment of 1/2” conduit.

0° 259 259 259 5° 262 259 256 10° 256 252 251 15° 252 247 246 20° 240 236 234 25° 230 225 225 30° 219 214 211 35° 202 199 197 40° 186 180 179 45° 166 163 162 50° 149 144 145 55° 128 124 125 60° 107 105 10465° 85 84 8270° 65 54 6475° 43 42 4080° 25 24 2685° 9 7 10 0 0 090°

Angle Along 45° Across

0-30° 198 28.4% 0-40° 322 46.1% 0-60° 560 80.2% 60-90° 139 19.8% 90-180° 0 0% 0-180° 699 100%

Zone Lumen % Luminaire

Angle Along 45° Across 45° 6017 5905 5868 55° 5713 5529 5575 65° 5128 5065 5003 75° 4288 4186 3982 85° 2729 2122 3032

BALLabs

Qty 1, 2 or 3

Qty 1 or 2

LTxxx RTxx

SM ALxx ARxx

“xx” 45° Shown length to longest side of lens

...................... ......................

xx

xx

1.5”, 2.5” or 3.0” decorative lines of light

Creates lighted edge, frame or transition to other surface types e.g. wood, stone, or acoustical ceiling tile

Separate DeadSide with mud lip for perpendicular drywall edge

Integrates with standard SimpleLine series

Unit fits within thickness of the finished drywall

DxH abutting wall or as transition from drywall to hard surface

SOLID SURFACEOR ABUTTING WALL

5/8 SHEET ROCK

BACKING OR FRAMING

DxM DeadSidewith Mud-In Lipfor OutsideCorner

DxH as transition from drywall suspended ceiling

5/8 SHEET ROCK

BACKING OR FRAMING

SUSPENSIONCEILING MOULDING

ACCOUSTICALCEILING TILE

MUD-IN SEAM

5/8 SHEET ROC

K

BAC

KING

OR FRA

MIN

G

1.5” 2.5” or 3.0”

2.655”(68m

m)

1.97”(50mm).846”

(21.5mm)

BAC

KING

OR FRA

MIN

G

DxH DeadSidewith StraightSide for Hardor OpenSurfaces

(38, 64 or 76m

m)

.125”

5/8 SHEET ROCK

Adds .627” to end Adds .060” to end

ETL Listed

......................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................

SimpleLine 1.5, 2.5 or 3.0 DeadsideType:

1.5”, 2.5” or 3.0”

Lum

ino

us

Len

gth

pe

r Sp

ec

ifie

r

Ordering

Shipping C Ship Complete Fixture H Ship Housing and Driver L Ship LED and Lens

Series S15 Simple line LED 1.5 inch width S25 Simple line LED 2.5 inch width S30 Simple line LED 3.0 inch width

Mounting MC5 New or Cut-in construction 5/8” drywall or thicker

Lamping 1ML Standard Output LED 4.9w/ft (16w/m) (S15 limited to 1ML in DeadSide housing) 2ML High Output LED 9.8w/ft (32w/m)

Color 27 2700K, 85+ CRI 30 3000K, 85+ CRI 35 3500K, 85+ CRI

Wire Harness 1 Single

Lens W White

Driver R Remote

Start End M Mud in End S Straight End ST Straight Translucent End ALxx Angle cut Left (degrees 1° to 45°) ARxx Angle cut Right (degrees 1° to 45°)

Length xx xx is distance in inch or mm xxFC Allows housing to be field cut for exact fit (must use H shipping option)

DeadSide DLH Left side abutting hard surface or ACT ceilingPosition DRH Right side to abut hard surface or ACT ceiling& Type DLM Left side with mud lip for perpendicular drywall DRM Right side with mud lip for perpendicular drywall

Transition** LTxx Left Turn same plane (degrees 90° to 179°) RTxx Right Turn same plane (degrees 90° to 179°) (Add Lengths & Transitions to form pattern)

Finish End M Mud in End S Straight End ALxx Angle cut Left (degrees 45° to 90°) ARxx Angle cut Right (degrees 45° to 90°)

DxH Color __ Natural Anondiozed BK Black BK Bronze __ Other

Units mm mm in inches

Options CP Chicago Plenum

Environmental Data

For Standard Output lamping at 3000k: W: 4.9W/ft (16W/m) LLD: 50,000hrs @ 70%lm20ft (6M) on one 100w driver info@dadolighting.com v/f 877.323.6584Specifications and dimensions subject to change without notice. Protected under U.S. Pat. 8109659 and other patents pending.

1002

111

1201

4

Temp range: 0° ~ 90°F (-20 ~ 30°C)No Mercury, No UV, No Flicker

Warranty: 5 years

For High Output lamping at 3000k: W: 9.8W/ft (32W/m) LLD: 50,000hrs @ 70%lm10ft (3M) on one 100w driver

SimpleLine 1.5, 2.5 or 3.0 Deadside

HousingAll aluminum housing mounts just like drywall to framing and hat channel to create a monolithic heat sink. Flange lip is mudded into surface to provide a trimless installation.DeadSide has (1) straight edge for abutting hard surfaces, ACT or open surfaces; or (2) return edge with mud lip for perpendicular drywall edge. Housing ships with 15ft CL2P cable attached to reach remote power supply (feeds at “Start End” of run and every 20 feet in longer runs). For longer lengths, contractor can add 50ft of 12awg wire or consult factory. Multiple housings tab & couple together for straightness.Class 2 wiring from remote driver for easy installation & safety.ETL listed, damp location, IC rated (including polyurethane insulation). Standard SimpleLine 5/8” fixtures of same width can be integrated in same run.

Various Ends for different starting and stopping conditions:“M” when mid field“S” when against hard stops (walls, floor, baseboard)“AL” & “AR” angle cut (1° to 45°)

TransitionsWhen lens changes directions on same plane or to a 2nd plane. (Minimum length 3.875” or 98mm per side).“LT” Left Turn same plane (degrees 90° to 179°); pre-assembled at factory.“RT” Right Turn same plane (degrees 90° to 179°); pre-assembled at factory.Consult factory for inside and outside corners.

LEDLow wattage white light LED produces even distribution with no shadows.Binned within 3 MacAdam ellipses.Blending and overlap keep color and light output uniform.May select Standard or High Output versions when ordering. See companion spec sheets for RGB & RGB+W color fixtures. 1.5” width limited to standard output in DeadSide housing.

OpticsLight guide panel diffuses multiple LED sources. Panel plugs into housing via DC barrel connects & is secured with clear poly screws for quick & easy replacement. Snap-in high transmission acrylic lens, up to 24ft per section, provides a matte white finish & even distribution for a dimensionless appearance. Lens fits flush with finished wall surface. Shallow & rigid housing ensures constant lens retention along length.Modifications

Runs can be provided to the nearest 1/16” or 1mm.“FC” Field cutting option reduces lead time for perfect architectural fit Housings may be cut on-site up to 6” parallel to straigh or factory mitered end. Then LED panels are made in factory to fit installed length.For unique custom work, such as inside or outside corners and patterns, see additional spec sheet or consult factory for shop drawings.

DriverRemotely located power supply with 24Vdc Constant Voltage output for simple class 2 installation. Electronic Drivers 50/60 Hz, 120 thru 277 input. Choice of 0-10V dimming. Type A Sound Rating,Non IC installations standard; consult factory for IC installation.May be surface mounted or recessed. Housing is die formed 16ga. CRS with White painted after fabrication finish. Listed for 90°C conductors with 1⁄2” trade size Knock Outs. A single 100W driver will power 20ft of low output or 10ft of high output LED modules; additional drivers allow for infinite lengths.

Driver* R Remote

Drive Qty Per X 1, 2, 3, or x (factory determined)Power Supply (2 max. with D010 type)

Type D010 Dimming via 0-10Vdc, 100W N100 Non dim 100W

Voltage UNV Universal 120-277V

* See Power Supplies spec sheet for additional versions and details

2.65”

11.50”

13.50”

10”

REMOTE POWER SUPPLYR-XXX-UNV SERIES

(254mm)

(68mm)

(343mm)

(292mm)

12” (305mm)

Non-Dimming - R-1N100-UNV

Dimming - R-1DO10-UNV

N100(+) 24V DC

(-) 24V DCGRDNEUTRALLINE

120-277 VAC

24VDC CLASS 2 WIRING (100W MAX PER CIRCUIT)

FIELD CONNECTIONS(BY INSTALLER)

(POWER SUPPLY MAY BE MOUNTED ABOVE ACCESSIBLE CEILING)

LED MODULEIN HOUSING

CL2P CABLE(CLASS 2 PLENUM RATED, WHITE SHEATH)

LED MODULEIN HOUSING

INTERNAL FIXTURE WIRING

N100

LED MODULEIN HOUSING(+) 24V DC

(-) 24V DCCL2P CABLE(CLASS 2 PLENUM RATED, WHITE SHEATH)

GRDNEUTRALLINE

120-277 VAC

24VDC CLASS 2 WIRING (100W MAX PER CIRCUIT)

LED MODULEIN HOUSING

FIELD CONNECTIONS(BY INSTALLER)

(-) GREY (0-10V DIM)

(+) PURPLE (0-10V DIM)

+-

0-10V CONTROL/SENSOR (BY OTHERS)UL APPROVED (SINKING CONTROLLER)

DIMMER - D010

INTERNAL FIXTURE WIRING

(POWER SUPPLY MAY BE MOUNTED ABOVE ACCESSIBLE CEILING)

Cat No.: S25-MC5-2ML-35-1-W-R-S-24-S-in*Meanwell Driver No.: LPV-20-24 operating at 120vTotal Lumens: 701* Multiply all data by .50 for 1ML lamping

Photometric Data

Independent Test No. 17940.0

This is an absolute test per LM-79-08

Luminous Length: 24”Width: 2.5”

SimpleLine 1.5, 2.5 or 3.0 Deadside

Zonal Lumen Summary

Luminance Data (cd/m2)

Candlepower Distribution (cd)

1. Mount and Level Housing. Cable to Remote Power Supply. 2. Install Drywall, Tape, Mud & Finish. 3. Plug in LED Module & snap in lens.

SimpleLine 1.5, 2.5 or 3.0 Deadside

Denotes the start & power feed point of each run. Can be at either end; whichever is closest to remotepower supply. Longer runs may require additionalfeed points

(1) DeadSide (on left) abutting granite C-S30-MC5-1ML-30-1-W-R-S-xxDLH-S-in

(2) Outlining underside edge of soffit C-S25-MC5-2ML-30-1-W-R-M-xxDLM-LT90-xxDLM-S-in

(3) Vertical along inside corner C-S25-MC5-1ML-30-1-W-R-S-xxDLH-S-in

(4) Outline outside edges & bottom of wall C-S15-MC5-1ML-30-1-W-R-S-xxDLM-RT90-xxDLH-RT90-xxDLM-S-in

Notes:• Consult factory for help with applications not shown or assistance with specifying & ordering.• Shop drawings will be prepared for all patterns and straight runs upon request.

*Specify Power Supply on next page or Power Supplies sheet** Consult factory for Inside (ICxx) & Outside (OCxx) Corner transitions

(Only if lenschanges direction)

Ex. Cat #s (xx denotes lengths)

Options“CP” Chicago Plenum rated housing with two-position junction box for attachment of 1/2” conduit.

0° 259 259 259 5° 262 259 256 10° 256 252 251 15° 252 247 246 20° 240 236 234 25° 230 225 225 30° 219 214 211 35° 202 199 197 40° 186 180 179 45° 166 163 162 50° 149 144 145 55° 128 124 125 60° 107 105 10465° 85 84 8270° 65 54 6475° 43 42 4080° 25 24 2685° 9 7 10 0 0 090°

Angle Along 45° Across

0-30° 198 28.4% 0-40° 322 46.1% 0-60° 560 80.2% 60-90° 139 19.8% 90-180° 0 0% 0-180° 699 100%

Zone Lumen % Luminaire

Angle Along 45° Across 45° 6017 5905 5868 55° 5713 5529 5575 65° 5128 5065 5003 75° 4288 4186 3982 85° 2729 2122 3032

BALLabs

Qty 1, 2 or 3

Qty 1 or 2

LTxxx RTxx

SM ALxx ARxx

“xx” 45° Shown length to longest side of lens

...................... ......................

xx

xx

1.5”, 2.5” or 3.0” decorative lines of light

Creates lighted edge, frame or transition to other surface types e.g. wood, stone, or acoustical ceiling tile

Separate DeadSide with mud lip for perpendicular drywall edge

Integrates with standard SimpleLine series

Unit fits within thickness of the finished drywall

DxH abutting wall or as transition from drywall to hard surface

SOLID SURFACEOR ABUTTING WALL

5/8 SHEET ROCK

BACKING OR FRAMING

DxM DeadSidewith Mud-In Lipfor OutsideCorner

DxH as transition from drywall suspended ceiling

5/8 SHEET ROCK

BACKING OR FRAMING

SUSPENSIONCEILING MOULDING

ACCOUSTICALCEILING TILE

MUD-IN SEAM

5/8 SHEET ROC

K

BAC

KING

OR FRA

MIN

G

1.5” 2.5” or 3.0”

2.655”(68m

m)

1.97”(50mm).846”

(21.5mm)

BAC

KING

OR FRA

MIN

G

DxH DeadSidewith StraightSide for Hardor OpenSurfaces

(38, 64 or 76m

m)

.125”

5/8 SHEET ROCK

Adds .627” to end Adds .060” to end

ETL Listed

......................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................

SimpleLine 1.5, 2.5 or 3.0 DeadsideType:

1.5”, 2.5” or 3.0”

Lum

ino

us

Len

gth

pe

r Sp

ec

ifie

r

Ordering

Shipping C Ship Complete Fixture H Ship Housing and Driver L Ship LED and Lens

Series S15 Simple line LED 1.5 inch width S25 Simple line LED 2.5 inch width S30 Simple line LED 3.0 inch width

Mounting MC5 New or Cut-in construction 5/8” drywall or thicker

Lamping 1ML Standard Output LED 4.9w/ft (16w/m) (S15 limited to 1ML in DeadSide housing) 2ML High Output LED 9.8w/ft (32w/m)

Color 27 2700K, 85+ CRI 30 3000K, 85+ CRI 35 3500K, 85+ CRI

Wire Harness 1 Single

Lens W White

Driver R Remote

Start End M Mud in End S Straight End ST Straight Translucent End ALxx Angle cut Left (degrees 1° to 45°) ARxx Angle cut Right (degrees 1° to 45°)

Length xx xx is distance in inch or mm xxFC Allows housing to be field cut for exact fit (must use H shipping option)

DeadSide DLH Left side abutting hard surface or ACT ceilingPosition DRH Right side to abut hard surface or ACT ceiling& Type DLM Left side with mud lip for perpendicular drywall DRM Right side with mud lip for perpendicular drywall

Transition** LTxx Left Turn same plane (degrees 90° to 179°) RTxx Right Turn same plane (degrees 90° to 179°) (Add Lengths & Transitions to form pattern)

Finish End M Mud in End S Straight End ALxx Angle cut Left (degrees 45° to 90°) ARxx Angle cut Right (degrees 45° to 90°)

DxH Color __ Natural Anondiozed BK Black BK Bronze __ Other

Units mm mm in inches

Options CP Chicago Plenum

Environmental Data

For Standard Output lamping at 3000k: W: 4.9W/ft (16W/m) LLD: 50,000hrs @ 70%lm20ft (6M) on one 100w driver info@dadolighting.com v/f 877.323.6584Specifications and dimensions subject to change without notice. Protected under U.S. Pat. 8109659 and other patents pending.

1002

111

1201

4

Temp range: 0° ~ 90°F (-20 ~ 30°C)No Mercury, No UV, No Flicker

Warranty: 5 years

For High Output lamping at 3000k: W: 9.8W/ft (32W/m) LLD: 50,000hrs @ 70%lm10ft (3M) on one 100w driver

SimpleLine 1.5, 2.5 or 3.0 Deadside

HousingAll aluminum housing mounts just like drywall to framing and hat channel to create a monolithic heat sink. Flange lip is mudded into surface to provide a trimless installation.DeadSide has (1) straight edge for abutting hard surfaces, ACT or open surfaces; or (2) return edge with mud lip for perpendicular drywall edge. Housing ships with 15ft CL2P cable attached to reach remote power supply (feeds at “Start End” of run and every 20 feet in longer runs). For longer lengths, contractor can add 50ft of 12awg wire or consult factory. Multiple housings tab & couple together for straightness.Class 2 wiring from remote driver for easy installation & safety.ETL listed, damp location, IC rated (including polyurethane insulation). Standard SimpleLine 5/8” fixtures of same width can be integrated in same run.

Various Ends for different starting and stopping conditions:“M” when mid field“S” when against hard stops (walls, floor, baseboard)“AL” & “AR” angle cut (1° to 45°)

TransitionsWhen lens changes directions on same plane or to a 2nd plane. (Minimum length 3.875” or 98mm per side).“LT” Left Turn same plane (degrees 90° to 179°); pre-assembled at factory.“RT” Right Turn same plane (degrees 90° to 179°); pre-assembled at factory.Consult factory for inside and outside corners.

LEDLow wattage white light LED produces even distribution with no shadows.Binned within 3 MacAdam ellipses.Blending and overlap keep color and light output uniform.May select Standard or High Output versions when ordering. See companion spec sheets for RGB & RGB+W color fixtures. 1.5” width limited to standard output in DeadSide housing.

OpticsLight guide panel diffuses multiple LED sources. Panel plugs into housing via DC barrel connects & is secured with clear poly screws for quick & easy replacement. Snap-in high transmission acrylic lens, up to 24ft per section, provides a matte white finish & even distribution for a dimensionless appearance. Lens fits flush with finished wall surface. Shallow & rigid housing ensures constant lens retention along length.Modifications

Runs can be provided to the nearest 1/16” or 1mm.“FC” Field cutting option reduces lead time for perfect architectural fit Housings may be cut on-site up to 6” parallel to straigh or factory mitered end. Then LED panels are made in factory to fit installed length.For unique custom work, such as inside or outside corners and patterns, see additional spec sheet or consult factory for shop drawings.

DriverRemotely located power supply with 24Vdc Constant Voltage output for simple class 2 installation. Electronic Drivers 50/60 Hz, 120 thru 277 input. Choice of 0-10V dimming. Type A Sound Rating,Non IC installations standard; consult factory for IC installation.May be surface mounted or recessed. Housing is die formed 16ga. CRS with White painted after fabrication finish. Listed for 90°C conductors with 1⁄2” trade size Knock Outs. A single 100W driver will power 20ft of low output or 10ft of high output LED modules; additional drivers allow for infinite lengths.

Driver* R Remote

Drive Qty Per X 1, 2, 3, or x (factory determined)Power Supply (2 max. with D010 type)

Type D010 Dimming via 0-10Vdc, 100W N100 Non dim 100W

Voltage UNV Universal 120-277V

* See Power Supplies spec sheet for additional versions and details

2.65”

11.50”

13.50”

10”

REMOTE POWER SUPPLYR-XXX-UNV SERIES

(254mm)

(68mm)

(343mm)

(292mm)

12” (305mm)

Non-Dimming - R-1N100-UNV

Dimming - R-1DO10-UNV

N100(+) 24V DC

(-) 24V DCGRDNEUTRALLINE

120-277 VAC

24VDC CLASS 2 WIRING (100W MAX PER CIRCUIT)

FIELD CONNECTIONS(BY INSTALLER)

(POWER SUPPLY MAY BE MOUNTED ABOVE ACCESSIBLE CEILING)

LED MODULEIN HOUSING

CL2P CABLE(CLASS 2 PLENUM RATED, WHITE SHEATH)

LED MODULEIN HOUSING

INTERNAL FIXTURE WIRING

N100

LED MODULEIN HOUSING(+) 24V DC

(-) 24V DCCL2P CABLE(CLASS 2 PLENUM RATED, WHITE SHEATH)

GRDNEUTRALLINE

120-277 VAC

24VDC CLASS 2 WIRING (100W MAX PER CIRCUIT)

LED MODULEIN HOUSING

FIELD CONNECTIONS(BY INSTALLER)

(-) GREY (0-10V DIM)

(+) PURPLE (0-10V DIM)

+-

0-10V CONTROL/SENSOR (BY OTHERS)UL APPROVED (SINKING CONTROLLER)

DIMMER - D010

INTERNAL FIXTURE WIRING

(POWER SUPPLY MAY BE MOUNTED ABOVE ACCESSIBLE CEILING)

Cat No.: S25-MC5-2ML-35-1-W-R-S-24-S-in*Meanwell Driver No.: LPV-20-24 operating at 120vTotal Lumens: 701* Multiply all data by .50 for 1ML lamping

Photometric Data

Independent Test No. 17940.0

This is an absolute test per LM-79-08

Luminous Length: 24”Width: 2.5”

SimpleLine 1.5, 2.5 or 3.0 Deadside

Zonal Lumen Summary

Luminance Data (cd/m2)

Candlepower Distribution (cd)

1. Mount and Level Housing. Cable to Remote Power Supply. 2. Install Drywall, Tape, Mud & Finish. 3. Plug in LED Module & snap in lens.

SimpleLine 1.5, 2.5 or 3.0 Deadside

Denotes the start & power feed point of each run. Can be at either end; whichever is closest to remotepower supply. Longer runs may require additionalfeed points

(1) DeadSide (on left) abutting granite C-S30-MC5-1ML-30-1-W-R-S-xxDLH-S-in

(2) Outlining underside edge of soffit C-S25-MC5-2ML-30-1-W-R-M-xxDLM-LT90-xxDLM-S-in

(3) Vertical along inside corner C-S25-MC5-1ML-30-1-W-R-S-xxDLH-S-in

(4) Outline outside edges & bottom of wall C-S15-MC5-1ML-30-1-W-R-S-xxDLM-RT90-xxDLH-RT90-xxDLM-S-in

Notes:• Consult factory for help with applications not shown or assistance with specifying & ordering.• Shop drawings will be prepared for all patterns and straight runs upon request.

*Specify Power Supply on next page or Power Supplies sheet** Consult factory for Inside (ICxx) & Outside (OCxx) Corner transitions

(Only if lenschanges direction)

Ex. Cat #s (xx denotes lengths)

Options“CP” Chicago Plenum rated housing with two-position junction box for attachment of 1/2” conduit.

0° 259 259 259 5° 262 259 256 10° 256 252 251 15° 252 247 246 20° 240 236 234 25° 230 225 225 30° 219 214 211 35° 202 199 197 40° 186 180 179 45° 166 163 162 50° 149 144 145 55° 128 124 125 60° 107 105 10465° 85 84 8270° 65 54 6475° 43 42 4080° 25 24 2685° 9 7 10 0 0 090°

Angle Along 45° Across

0-30° 198 28.4% 0-40° 322 46.1% 0-60° 560 80.2% 60-90° 139 19.8% 90-180° 0 0% 0-180° 699 100%

Zone Lumen % Luminaire

Angle Along 45° Across 45° 6017 5905 5868 55° 5713 5529 5575 65° 5128 5065 5003 75° 4288 4186 3982 85° 2729 2122 3032

BALLabs

Qty 1, 2 or 3

Qty 1 or 2

LTxxx RTxx

SM ALxx ARxx

“xx” 45° Shown length to longest side of lens

...................... ......................

xx

xx

1.5”, 2.5” or 3.0” decorative lines of light

Creates lighted edge, frame or transition to other surface types e.g. wood, stone, or acoustical ceiling tile

Separate DeadSide with mud lip for perpendicular drywall edge

Integrates with standard SimpleLine series

Unit fits within thickness of the finished drywall

DxH abutting wall or as transition from drywall to hard surface

SOLID SURFACEOR ABUTTING WALL

5/8 SHEET ROCK

BACKING OR FRAMING

DxM DeadSidewith Mud-In Lipfor OutsideCorner

DxH as transition from drywall suspended ceiling

5/8 SHEET ROCK

BACKING OR FRAMING

SUSPENSIONCEILING MOULDING

ACCOUSTICALCEILING TILE

MUD-IN SEAM

5/8 SHEET ROC

K

BAC

KING

OR FRA

MIN

G

1.5” 2.5” or 3.0”

2.655”(68m

m)

1.97”(50mm).846”

(21.5mm)

BAC

KING

OR FRA

MIN

G

DxH DeadSidewith StraightSide for Hardor OpenSurfaces

(38, 64 or 76m

m)

.125”

5/8 SHEET ROCK

Adds .627” to end Adds .060” to end

ETL Listed

......................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................

SimpleLine 1.5, 2.5 or 3.0 DeadsideType:

1.5”, 2.5” or 3.0”

Lum

ino

us

Len

gth

pe

r Sp

ec

ifie

r

Ordering

Shipping C Ship Complete Fixture H Ship Housing and Driver L Ship LED and Lens

Series S15 Simple line LED 1.5 inch width S25 Simple line LED 2.5 inch width S30 Simple line LED 3.0 inch width

Mounting MC5 New or Cut-in construction 5/8” drywall or thicker

Lamping 1ML Standard Output LED 4.9w/ft (16w/m) (S15 limited to 1ML in DeadSide housing) 2ML High Output LED 9.8w/ft (32w/m)

Color 27 2700K, 85+ CRI 30 3000K, 85+ CRI 35 3500K, 85+ CRI

Wire Harness 1 Single

Lens W White

Driver R Remote

Start End M Mud in End S Straight End ST Straight Translucent End ALxx Angle cut Left (degrees 1° to 45°) ARxx Angle cut Right (degrees 1° to 45°)

Length xx xx is distance in inch or mm xxFC Allows housing to be field cut for exact fit (must use H shipping option)

DeadSide DLH Left side abutting hard surface or ACT ceilingPosition DRH Right side to abut hard surface or ACT ceiling& Type DLM Left side with mud lip for perpendicular drywall DRM Right side with mud lip for perpendicular drywall

Transition** LTxx Left Turn same plane (degrees 90° to 179°) RTxx Right Turn same plane (degrees 90° to 179°) (Add Lengths & Transitions to form pattern)

Finish End M Mud in End S Straight End ALxx Angle cut Left (degrees 45° to 90°) ARxx Angle cut Right (degrees 45° to 90°)

DxH Color __ Natural Anondiozed BK Black BK Bronze __ Other

Units mm mm in inches

Options CP Chicago Plenum

Environmental Data

For Standard Output lamping at 3000k: W: 4.9W/ft (16W/m) LLD: 50,000hrs @ 70%lm20ft (6M) on one 100w driver info@dadolighting.com v/f 877.323.6584Specifications and dimensions subject to change without notice. Protected under U.S. Pat. 8109659 and other patents pending.

1002

111

1201

4

Temp range: 0° ~ 90°F (-20 ~ 30°C)No Mercury, No UV, No Flicker

Warranty: 5 years

For High Output lamping at 3000k: W: 9.8W/ft (32W/m) LLD: 50,000hrs @ 70%lm10ft (3M) on one 100w driver

SimpleLine 1.5, 2.5 or 3.0 Deadside

HousingAll aluminum housing mounts just like drywall to framing and hat channel to create a monolithic heat sink. Flange lip is mudded into surface to provide a trimless installation.DeadSide has (1) straight edge for abutting hard surfaces, ACT or open surfaces; or (2) return edge with mud lip for perpendicular drywall edge. Housing ships with 15ft CL2P cable attached to reach remote power supply (feeds at “Start End” of run and every 20 feet in longer runs). For longer lengths, contractor can add 50ft of 12awg wire or consult factory. Multiple housings tab & couple together for straightness.Class 2 wiring from remote driver for easy installation & safety.ETL listed, damp location, IC rated (including polyurethane insulation). Standard SimpleLine 5/8” fixtures of same width can be integrated in same run.

Various Ends for different starting and stopping conditions:“M” when mid field“S” when against hard stops (walls, floor, baseboard)“AL” & “AR” angle cut (1° to 45°)

TransitionsWhen lens changes directions on same plane or to a 2nd plane. (Minimum length 3.875” or 98mm per side).“LT” Left Turn same plane (degrees 90° to 179°); pre-assembled at factory.“RT” Right Turn same plane (degrees 90° to 179°); pre-assembled at factory.Consult factory for inside and outside corners.

LEDLow wattage white light LED produces even distribution with no shadows.Binned within 3 MacAdam ellipses.Blending and overlap keep color and light output uniform.May select Standard or High Output versions when ordering. See companion spec sheets for RGB & RGB+W color fixtures. 1.5” width limited to standard output in DeadSide housing.

OpticsLight guide panel diffuses multiple LED sources. Panel plugs into housing via DC barrel connects & is secured with clear poly screws for quick & easy replacement. Snap-in high transmission acrylic lens, up to 24ft per section, provides a matte white finish & even distribution for a dimensionless appearance. Lens fits flush with finished wall surface. Shallow & rigid housing ensures constant lens retention along length.Modifications

Runs can be provided to the nearest 1/16” or 1mm.“FC” Field cutting option reduces lead time for perfect architectural fit Housings may be cut on-site up to 6” parallel to straigh or factory mitered end. Then LED panels are made in factory to fit installed length.For unique custom work, such as inside or outside corners and patterns, see additional spec sheet or consult factory for shop drawings.

DriverRemotely located power supply with 24Vdc Constant Voltage output for simple class 2 installation. Electronic Drivers 50/60 Hz, 120 thru 277 input. Choice of 0-10V dimming. Type A Sound Rating,Non IC installations standard; consult factory for IC installation.May be surface mounted or recessed. Housing is die formed 16ga. CRS with White painted after fabrication finish. Listed for 90°C conductors with 1⁄2” trade size Knock Outs. A single 100W driver will power 20ft of low output or 10ft of high output LED modules; additional drivers allow for infinite lengths.

Driver* R Remote

Drive Qty Per X 1, 2, 3, or x (factory determined)Power Supply (2 max. with D010 type)

Type D010 Dimming via 0-10Vdc, 100W N100 Non dim 100W

Voltage UNV Universal 120-277V

* See Power Supplies spec sheet for additional versions and details

2.65”

11.50”

13.50”

10”

REMOTE POWER SUPPLYR-XXX-UNV SERIES

(254mm)

(68mm)

(343mm)

(292mm)

12” (305mm)

Non-Dimming - R-1N100-UNV

Dimming - R-1DO10-UNV

N100(+) 24V DC

(-) 24V DCGRDNEUTRALLINE

120-277 VAC

24VDC CLASS 2 WIRING (100W MAX PER CIRCUIT)

FIELD CONNECTIONS(BY INSTALLER)

(POWER SUPPLY MAY BE MOUNTED ABOVE ACCESSIBLE CEILING)

LED MODULEIN HOUSING

CL2P CABLE(CLASS 2 PLENUM RATED, WHITE SHEATH)

LED MODULEIN HOUSING

INTERNAL FIXTURE WIRING

N100

LED MODULEIN HOUSING(+) 24V DC

(-) 24V DCCL2P CABLE(CLASS 2 PLENUM RATED, WHITE SHEATH)

GRDNEUTRALLINE

120-277 VAC

24VDC CLASS 2 WIRING (100W MAX PER CIRCUIT)

LED MODULEIN HOUSING

FIELD CONNECTIONS(BY INSTALLER)

(-) GREY (0-10V DIM)

(+) PURPLE (0-10V DIM)

+-

0-10V CONTROL/SENSOR (BY OTHERS)UL APPROVED (SINKING CONTROLLER)

DIMMER - D010

INTERNAL FIXTURE WIRING

(POWER SUPPLY MAY BE MOUNTED ABOVE ACCESSIBLE CEILING)

Cat No.: S25-MC5-2ML-35-1-W-R-S-24-S-in*Meanwell Driver No.: LPV-20-24 operating at 120vTotal Lumens: 701* Multiply all data by .50 for 1ML lamping

Photometric Data

Independent Test No. 17940.0

This is an absolute test per LM-79-08

Luminous Length: 24”Width: 2.5”

SimpleLine 1.5, 2.5 or 3.0 Deadside

Zonal Lumen Summary

Luminance Data (cd/m2)

Candlepower Distribution (cd)

1. Mount and Level Housing. Cable to Remote Power Supply. 2. Install Drywall, Tape, Mud & Finish. 3. Plug in LED Module & snap in lens.

SimpleLine 1.5, 2.5 or 3.0 Deadside

Denotes the start & power feed point of each run. Can be at either end; whichever is closest to remotepower supply. Longer runs may require additionalfeed points

(1) DeadSide (on left) abutting granite C-S30-MC5-1ML-30-1-W-R-S-xxDLH-S-in

(2) Outlining underside edge of soffit C-S25-MC5-2ML-30-1-W-R-M-xxDLM-LT90-xxDLM-S-in

(3) Vertical along inside corner C-S25-MC5-1ML-30-1-W-R-S-xxDLH-S-in

(4) Outline outside edges & bottom of wall C-S15-MC5-1ML-30-1-W-R-S-xxDLM-RT90-xxDLH-RT90-xxDLM-S-in

Notes:• Consult factory for help with applications not shown or assistance with specifying & ordering.• Shop drawings will be prepared for all patterns and straight runs upon request.

*Specify Power Supply on next page or Power Supplies sheet** Consult factory for Inside (ICxx) & Outside (OCxx) Corner transitions

(Only if lenschanges direction)

Ex. Cat #s (xx denotes lengths)

Options“CP” Chicago Plenum rated housing with two-position junction box for attachment of 1/2” conduit.

0° 259 259 259 5° 262 259 256 10° 256 252 251 15° 252 247 246 20° 240 236 234 25° 230 225 225 30° 219 214 211 35° 202 199 197 40° 186 180 179 45° 166 163 162 50° 149 144 145 55° 128 124 125 60° 107 105 10465° 85 84 8270° 65 54 6475° 43 42 4080° 25 24 2685° 9 7 10 0 0 090°

Angle Along 45° Across

0-30° 198 28.4% 0-40° 322 46.1% 0-60° 560 80.2% 60-90° 139 19.8% 90-180° 0 0% 0-180° 699 100%

Zone Lumen % Luminaire

Angle Along 45° Across 45° 6017 5905 5868 55° 5713 5529 5575 65° 5128 5065 5003 75° 4288 4186 3982 85° 2729 2122 3032

BALLabs

Qty 1, 2 or 3

Qty 1 or 2

LTxxx RTxx

SM ALxx ARxx

“xx” 45° Shown length to longest side of lens

...................... ......................

xx

xx

1.5”, 2.5” or 3.0” decorative lines of light

Creates lighted edge, frame or transition to other surface types e.g. wood, stone, or acoustical ceiling tile

Separate DeadSide with mud lip for perpendicular drywall edge

Integrates with standard SimpleLine series

Unit fits within thickness of the finished drywall

DxH abutting wall or as transition from drywall to hard surface

SOLID SURFACEOR ABUTTING WALL

5/8 SHEET ROCK

BACKING OR FRAMING

DxM DeadSidewith Mud-In Lipfor OutsideCorner

DxH as transition from drywall suspended ceiling

5/8 SHEET ROCK

BACKING OR FRAMING

SUSPENSIONCEILING MOULDING

ACCOUSTICALCEILING TILE

MUD-IN SEAM

5/8 SHEET ROC

K

BAC

KING

OR FRA

MIN

G

1.5” 2.5” or 3.0”

2.655”(68m

m)

1.97”(50mm).846”

(21.5mm)

BAC

KING

OR FRA

MIN

G

DxH DeadSidewith StraightSide for Hardor OpenSurfaces

(38, 64 or 76m

m)

.125”

5/8 SHEET ROCK

Adds .627” to end Adds .060” to end

ETL Listed

......................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................

SimpleLine 1.5, 2.5 or 3.0 DeadsideType:

1.5”, 2.5” or 3.0”

Lum

ino

us

Len

gth

pe

r Sp

ec

ifie

r

Ordering

Shipping C Ship Complete Fixture H Ship Housing and Driver L Ship LED and Lens

Series S15 Simple line LED 1.5 inch width S25 Simple line LED 2.5 inch width S30 Simple line LED 3.0 inch width

Mounting MC5 New or Cut-in construction 5/8” drywall or thicker

Lamping 1ML Standard Output LED 4.9w/ft (16w/m) (S15 limited to 1ML in DeadSide housing) 2ML High Output LED 9.8w/ft (32w/m)

Color 27 2700K, 85+ CRI 30 3000K, 85+ CRI 35 3500K, 85+ CRI

Wire Harness 1 Single

Lens W White

Driver R Remote

Start End M Mud in End S Straight End ST Straight Translucent End ALxx Angle cut Left (degrees 1° to 45°) ARxx Angle cut Right (degrees 1° to 45°)

Length xx xx is distance in inch or mm xxFC Allows housing to be field cut for exact fit (must use H shipping option)

DeadSide DLH Left side abutting hard surface or ACT ceilingPosition DRH Right side to abut hard surface or ACT ceiling& Type DLM Left side with mud lip for perpendicular drywall DRM Right side with mud lip for perpendicular drywall

Transition** LTxx Left Turn same plane (degrees 90° to 179°) RTxx Right Turn same plane (degrees 90° to 179°) (Add Lengths & Transitions to form pattern)

Finish End M Mud in End S Straight End ALxx Angle cut Left (degrees 45° to 90°) ARxx Angle cut Right (degrees 45° to 90°)

DxH Color __ Natural Anondiozed BK Black BK Bronze __ Other

Units mm mm in inches

Options CP Chicago Plenum

Environmental Data

For Standard Output lamping at 3000k: W: 4.9W/ft (16W/m) LLD: 50,000hrs @ 70%lm20ft (6M) on one 100w driver info@dadolighting.com v/f 877.323.6584Specifications and dimensions subject to change without notice. Protected under U.S. Pat. 8109659 and other patents pending.

1002

111

1201

4

Temp range: 0° ~ 90°F (-20 ~ 30°C)No Mercury, No UV, No Flicker

Warranty: 5 years

For High Output lamping at 3000k: W: 9.8W/ft (32W/m) LLD: 50,000hrs @ 70%lm10ft (3M) on one 100w driver

SimpleLine 1.5, 2.5 or 3.0 Deadside

HousingAll aluminum housing mounts just like drywall to framing and hat channel to create a monolithic heat sink. Flange lip is mudded into surface to provide a trimless installation.DeadSide has (1) straight edge for abutting hard surfaces, ACT or open surfaces; or (2) return edge with mud lip for perpendicular drywall edge. Housing ships with 15ft CL2P cable attached to reach remote power supply (feeds at “Start End” of run and every 20 feet in longer runs). For longer lengths, contractor can add 50ft of 12awg wire or consult factory. Multiple housings tab & couple together for straightness.Class 2 wiring from remote driver for easy installation & safety.ETL listed, damp location, IC rated (including polyurethane insulation). Standard SimpleLine 5/8” fixtures of same width can be integrated in same run.

Various Ends for different starting and stopping conditions:“M” when mid field“S” when against hard stops (walls, floor, baseboard)“AL” & “AR” angle cut (1° to 45°)

TransitionsWhen lens changes directions on same plane or to a 2nd plane. (Minimum length 3.875” or 98mm per side).“LT” Left Turn same plane (degrees 90° to 179°); pre-assembled at factory.“RT” Right Turn same plane (degrees 90° to 179°); pre-assembled at factory.Consult factory for inside and outside corners.

LEDLow wattage white light LED produces even distribution with no shadows.Binned within 3 MacAdam ellipses.Blending and overlap keep color and light output uniform.May select Standard or High Output versions when ordering. See companion spec sheets for RGB & RGB+W color fixtures. 1.5” width limited to standard output in DeadSide housing.

OpticsLight guide panel diffuses multiple LED sources. Panel plugs into housing via DC barrel connects & is secured with clear poly screws for quick & easy replacement. Snap-in high transmission acrylic lens, up to 24ft per section, provides a matte white finish & even distribution for a dimensionless appearance. Lens fits flush with finished wall surface. Shallow & rigid housing ensures constant lens retention along length.Modifications

Runs can be provided to the nearest 1/16” or 1mm.“FC” Field cutting option reduces lead time for perfect architectural fit Housings may be cut on-site up to 6” parallel to straigh or factory mitered end. Then LED panels are made in factory to fit installed length.For unique custom work, such as inside or outside corners and patterns, see additional spec sheet or consult factory for shop drawings.

DriverRemotely located power supply with 24Vdc Constant Voltage output for simple class 2 installation. Electronic Drivers 50/60 Hz, 120 thru 277 input. Choice of 0-10V dimming. Type A Sound Rating,Non IC installations standard; consult factory for IC installation.May be surface mounted or recessed. Housing is die formed 16ga. CRS with White painted after fabrication finish. Listed for 90°C conductors with 1⁄2” trade size Knock Outs. A single 100W driver will power 20ft of low output or 10ft of high output LED modules; additional drivers allow for infinite lengths.

Driver* R Remote

Drive Qty Per X 1, 2, 3, or x (factory determined)Power Supply (2 max. with D010 type)

Type D010 Dimming via 0-10Vdc, 100W N100 Non dim 100W

Voltage UNV Universal 120-277V

* See Power Supplies spec sheet for additional versions and details

2.65”

11.50”

13.50”

10”

REMOTE POWER SUPPLYR-XXX-UNV SERIES

(254mm)

(68mm)

(343mm)

(292mm)

12” (305mm)

Non-Dimming - R-1N100-UNV

Dimming - R-1DO10-UNV

N100(+) 24V DC

(-) 24V DCGRDNEUTRALLINE

120-277 VAC

24VDC CLASS 2 WIRING (100W MAX PER CIRCUIT)

FIELD CONNECTIONS(BY INSTALLER)

(POWER SUPPLY MAY BE MOUNTED ABOVE ACCESSIBLE CEILING)

LED MODULEIN HOUSING

CL2P CABLE(CLASS 2 PLENUM RATED, WHITE SHEATH)

LED MODULEIN HOUSING

INTERNAL FIXTURE WIRING

N100

LED MODULEIN HOUSING(+) 24V DC

(-) 24V DCCL2P CABLE(CLASS 2 PLENUM RATED, WHITE SHEATH)

GRDNEUTRALLINE

120-277 VAC

24VDC CLASS 2 WIRING (100W MAX PER CIRCUIT)

LED MODULEIN HOUSING

FIELD CONNECTIONS(BY INSTALLER)

(-) GREY (0-10V DIM)

(+) PURPLE (0-10V DIM)

+-

0-10V CONTROL/SENSOR (BY OTHERS)UL APPROVED (SINKING CONTROLLER)

DIMMER - D010

INTERNAL FIXTURE WIRING

(POWER SUPPLY MAY BE MOUNTED ABOVE ACCESSIBLE CEILING)

Cat No.: S25-MC5-2ML-35-1-W-R-S-24-S-in*Meanwell Driver No.: LPV-20-24 operating at 120vTotal Lumens: 701* Multiply all data by .50 for 1ML lamping

Photometric Data

Independent Test No. 17940.0

This is an absolute test per LM-79-08

Luminous Length: 24”Width: 2.5”

SimpleLine 1.5, 2.5 or 3.0 Deadside

Zonal Lumen Summary

Luminance Data (cd/m2)

Candlepower Distribution (cd)

1. Mount and Level Housing. Cable to Remote Power Supply. 2. Install Drywall, Tape, Mud & Finish. 3. Plug in LED Module & snap in lens.

SimpleLine 1.5, 2.5 or 3.0 Deadside

Denotes the start & power feed point of each run. Can be at either end; whichever is closest to remotepower supply. Longer runs may require additionalfeed points

(1) DeadSide (on left) abutting granite C-S30-MC5-1ML-30-1-W-R-S-xxDLH-S-in

(2) Outlining underside edge of soffit C-S25-MC5-2ML-30-1-W-R-M-xxDLM-LT90-xxDLM-S-in

(3) Vertical along inside corner C-S25-MC5-1ML-30-1-W-R-S-xxDLH-S-in

(4) Outline outside edges & bottom of wall C-S15-MC5-1ML-30-1-W-R-S-xxDLM-RT90-xxDLH-RT90-xxDLM-S-in

Notes:• Consult factory for help with applications not shown or assistance with specifying & ordering.• Shop drawings will be prepared for all patterns and straight runs upon request.

*Specify Power Supply on next page or Power Supplies sheet** Consult factory for Inside (ICxx) & Outside (OCxx) Corner transitions

(Only if lenschanges direction)

Ex. Cat #s (xx denotes lengths)

Options“CP” Chicago Plenum rated housing with two-position junction box for attachment of 1/2” conduit.

0° 259 259 259 5° 262 259 256 10° 256 252 251 15° 252 247 246 20° 240 236 234 25° 230 225 225 30° 219 214 211 35° 202 199 197 40° 186 180 179 45° 166 163 162 50° 149 144 145 55° 128 124 125 60° 107 105 10465° 85 84 8270° 65 54 6475° 43 42 4080° 25 24 2685° 9 7 10 0 0 090°

Angle Along 45° Across

0-30° 198 28.4% 0-40° 322 46.1% 0-60° 560 80.2% 60-90° 139 19.8% 90-180° 0 0% 0-180° 699 100%

Zone Lumen % Luminaire

Angle Along 45° Across 45° 6017 5905 5868 55° 5713 5529 5575 65° 5128 5065 5003 75° 4288 4186 3982 85° 2729 2122 3032

BALLabs

Qty 1, 2 or 3

Qty 1 or 2

LTxxx RTxx

SM ALxx ARxx

“xx” 45° Shown length to longest side of lens

...................... ......................

xx

xx

1.5”, 2.5” or 3.0” decorative lines of light

Creates lighted edge, frame or transition to other surface types e.g. wood, stone, or acoustical ceiling tile

Separate DeadSide with mud lip for perpendicular drywall edge

Integrates with standard SimpleLine series

Unit fits within thickness of the finished drywall

DxH abutting wall or as transition from drywall to hard surface

SOLID SURFACEOR ABUTTING WALL

5/8 SHEET ROCK

BACKING OR FRAMING

DxM DeadSidewith Mud-In Lipfor OutsideCorner

DxH as transition from drywall suspended ceiling

5/8 SHEET ROCK

BACKING OR FRAMING

SUSPENSIONCEILING MOULDING

ACCOUSTICALCEILING TILE

MUD-IN SEAM

5/8 SHEET ROC

K

BAC

KING

OR FRA

MIN

G

1.5” 2.5” or 3.0”

2.655”(68m

m)

1.97”(50mm).846”

(21.5mm)

BAC

KING

OR FRA

MIN

G

DxH DeadSidewith StraightSide for Hardor OpenSurfaces

(38, 64 or 76m

m)

.125”

5/8 SHEET ROCK

Adds .627” to end Adds .060” to end

ETL Listed

LT 90

AR45

DL H

AR45

RT 90

DL M

S

Ex. Cat #(1)

MEx. Cat #(2)

LT 90

Ex. Cat #(3)M

Ex. Cat #(4)

Ex. C

at #

(1)

M

S