Washington Motorcycle Manual | Washington Motorcycle Handbook
Simple steps to paint and Customize your Motorcycle Fairings
1
Process to Paint Motorcycle Fairings Step 2 Step 3 Step 4 Step 6 Statistic Overview A stylish and trendy fairing for a motorcycle can transform the look and feel of the bike completely! Fairings often help in reducing the fuel consumption since they enhance the aerodynamics that leads to an increase in the life of the engine. Step 7 Step 8 Step 9 Step 1 Remove and set aside the parts of the bike you plan to paint. Sand down the surface you wish to paint using sandpaper. 30 % Customers say they are satisfied with Aftermarket Fairings. 50 % 20 % Step 5 Customers say they are satisfied with OEM Fairings. Customers say they are satisfied with Custom made Fairings. Choose an area where you wish to paint Wipe down the newly-sanded surface Smoothen a layer of body filler over the newly sanded surface.Re-sand the surface once the body filler has dried Clean the spray gun Mix the paint with the thinner.Use the spray gun to apply 3 to 4 layers of paint to the motorcycle Apply primer, using a spray gun or foam brush.Lightly sand down the primed surface, once the 2nd coat has dried Wipe the surface with a rag that’s been lightly dipped into the thinner Apply a top coat for protection and shine using a spray gun or horsehair brush Sources
-
Upload
yessenia-leo -
Category
Automotive
-
view
20 -
download
4
Transcript of Simple steps to paint and Customize your Motorcycle Fairings
Process to Paint Motorcycle Fairings
Step 2
Step 3
Step 4
Step 6
Statistic Overview
A stylish and trendy fairing for amotorcycle can transform the lookand feel of the bike completely!Fairings often help in reducing thefuel consumption since they enhancethe aerodynamics that leads to anincrease in the life of the engine.
Step 7
Step 8
Step 9
Step 1
Remove and set aside theparts of the bike you planto paint. Sand down thesurface you wish to paintusing sandpaper.
30 % Customers say they aresatisfied with AftermarketFairings.
50 %
20 %
Step 5
Customers say they aresatisfied with OEM Fairings.
Customers say they aresatisfied with Custom madeFairings.
Choose an area where youwish to paint
Wipe down thenewly-sandedsurface
Smoothen a layer ofbody filler over thenewly sandedsurface.Re-sand thesurface once the bodyfiller has dried
Clean the spray gun
Mix the paint with thethinner.Use the spray gun toapply 3 to 4 layers of paint tothe motorcycle
Apply primer, using a spray gunor foam brush.Lightly sand downthe primed surface, once the2nd coat has dried
Wipe the surface with a ragthat’s been lightly dippedinto the thinner
Apply a top coat forprotection and shine using aspray gun or horsehair brush
Sources
