SIM7000A GSM Board
5
www.diymalls.com [email protected] SIM7000A GSM Board Document link： https://tinyurl.com/SIM7000X or http://gofile.me/6Jtt7/e1pUqb8Ww You can not connect micro USB interface to power the board directly. You need use Arduino UNO or serial module to connect with SIM7000A board Connection with Arduino UNO:
Transcript of SIM7000A GSM Board
www.diymalls.com [email protected]
SIM7000A GSM Board
Document link： https://tinyurl.com/SIM7000X or http://gofile.me/6Jtt7/e1pUqb8Ww
You can not connect micro USB interface to power the board directly.
You need use Arduino UNO or serial module to connect with SIM7000A board
Connection with Arduino UNO:
www.diymalls.com [email protected]
Connection with serial module: About the USB cable, you can make one as below Note: you need install driver for serial module and need switch it to 3.3V
www.diymalls.com [email protected]
www.diymalls.com [email protected]
Software: you can use SSCOM or other Serial port software Choose COM port and set BaudRate to 115200
www.diymalls.com [email protected]
