SILVIA · 2020-06-23 · QT 32 60W E27 Lamp max size: Ø40 mm H.115 mm MiniSilvia on post - H. 950...
Transcript of SILVIA · 2020-06-23 · QT 32 60W E27 Lamp max size: Ø40 mm H.115 mm MiniSilvia on post - H. 950...
SILVIA
65
METAL HALIDE VERSION:Class A+HIT-TC-CE/G8,5
A+
HALOGEN VERSION:Class DQT32/E27
D
EU Regulation 874/2012 - Illumination equipment energy classes
.1 White .6 Grey .3 Anthracite .18 Deep Brown.4 Black
Bollard Light Wall fitting
Ceiling fitting The fitting is equipped with 1 cable input
Protection againstimpact.IK 07 - 2,00 joule
• Cylindrical light for installation on wall, ceiling and floor or as a bollard light – surface.
• Configuration: die-cast aluminium structure, EN AB-47100 alloy (low copper content), extruded aluminium pole (version “on post”). Borosilicate diffuser: transparent or sandblasted.
• Double layer coating for high resistance to corrosion: the aluminium components are painted with a doublecoat using powders which are compliant with QUALICOATstandards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a secondfinishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminium fitting starts from components which have been sandblasted in advance to make the surface more porousand increase the adherence of the paint. Ares effectsalkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
• Protection rating: IP65• In compliance with EN 60598-1 standards• Class of insulation: I• Installation: Mini Silvia: the luminaire is equipped with one
M16 cable gland (4,5<Ø<10mm cables) placed under txhe head of the luminaire. Mini Silvia on post: the luminaire is equipped with a piece of cable and a watertight 3-waysconnector (for cables 5<Ø<13mm) for direct or end-to-end connection. Outdoor use requires suitable flexible cables. We recommend installation on a concrete basement orsurface, directly with bolts or through the dedicated fixing plate (to be ordered separately).
• We recommend the use of a connection system with aprotection degree greater than or equal to the protectiondegree of the luminaire.
• During the installation and the maintenance of the fixtures it is important to be careful and avoid damages on the paint coating. Damages on the coating exposed to outdoor conditions orwater, could cause corrosion.Chemical substances affect the anticorrosion coveringprotection.
Pre-wired with approx 150mm of cable
METAL HALIDE VERSION:Class A+ HIT-TC-CE/G8,5
HALOGEN VERSION:Class D QT32/E27
MINISILVIA_MINISILVIA ON POST
MiniSilvia - MiniSilvia on post
.12 Forest Green
190
Ø 130
54
190
Ø 130
54
550
Ø 130
54
Ø 180
C0 / C180 C90 / C270
cd / 1000 lm 10m
1
0
Lux
-1-2 2-1
90°
120°
60° 90
1611
16
C0 / C180 C90 / C270
cd / 1000 lm 10m
1
0
Lux
-1-2 2-1
120°
60° 90
90° 1
59
17
C0 / C180 C90 / C270
cd / 1000 lm 20m
2
0
Lux
6
111620
-2-4 4-2
80
90˚
120˚
60˚
65
65
65
MiniSilvia - MiniSilvia on post
MiniSilvia - Sandblasted Glass - 120° Emission
MiniSilvia - Sandblasted Glass - 360° Emission
MiniSilvia on post - H. 550 mm - Sandblasted Glass - 120° Emission
930121 QT 32 60W E27Lamp max size: Ø40 mm H.115 mm
930100 QT 32 60W E27Lamp max size: Ø40 mm H.115 mm
930181 QT 32 60W E27Lamp max size: Ø40 mm H.115 mm
550
Ø 130
54
Ø 180
C0 / C180 C90 / C270
cd / 1000 lm 20m
2
0511
Lux
1621
-2-4 4-2
80
90˚
120˚
60˚
65
950
Ø 130
54
Ø 180
950
Ø 130
54
Ø 180
C0 / C180 C90 / C270
cd / 1000 lm 20m
2
0
Lux
3
5
7
-2-4 4-2
80
90˚
120˚
60˚
C0 / C180 C90 / C270
cd / 1000 lm 20m
2
0
Lux
5
75
3
-2-4 4-2
80
90˚
120˚
60˚
65
65
MiniSilvia - MiniSilvia on post
MiniSilvia on post - H. 550 mm - Sandblasted Glass - 360° Emission
930178 QT 32 60W E27Lamp max size: Ø40 mm H.115 mm
MiniSilvia on post - H. 950 mm - Sandblasted Glass - 120° Emission
MiniSilvia on post - H. 950 mm - Sandblasted Glass - 360° Emission
930182 QT 32 60W E27Lamp max size: Ø40 mm H.115 mm
930179 QT 32 60W E27Lamp max size: Ø40 mm H.115 mm
550
Ø 130
54
Ø 180
C0 / C180 C90 / C270
cd / 1000 lm -2-4 20m
2
0
Lux
2752
77127
4-2
9090˚
120˚
60˚
936787 HIT-TC-CE 35W G8,5
65
550
Ø 130
54
Ø 180
950
Ø 130
54
Ø 180
C0 / C180 C90 / C270
cd / 1000 lm -2-4 20m
2
0
Lux
2853
78103
4-2
9090˚
120˚
60˚
C0 / C180 C90 / C270
cd / 1000 lm -2-4 20m
2
0
Lux
5
2565 105
4-2
9090˚
120˚
60˚
936788 HIT-TC-CE 35W G8,5
936784 HIT-TC-CE 35W G8,5
65
65
Electronic ballast
MiniSilvia - MiniSilvia on post
MiniSilvia on post - H. 550 mm - Transparent Glass - 120° Emission
Electronic ballast
Electronic ballast
MiniSilvia on post - H. 550 mm - Transparent Glass - 360° Emission
MiniSilvia on post - H. 950 mm - Transparent Glass - 120° Emission
950
Ø 130
54
Ø 180
C0 / C180 C90 / C270
cd / 1000 lm -2-4 20m
2
0
Lux
2752 77
127
4-2
9090˚
120˚
60˚
936785 HIT-TC-CE 35W G8,5
65
200
174 40
0
Ø 180
Ø 220
acc. code
prod. code 21 260
930100
930121
930178 • •930179 • •930181 • •930182 • •936784 • •936785 • •936787 • •936788 • •
Incorrect Fixing MethodCorrect Fixing Method Correct Fixing MethodBollard �xed on plinth + plug Bollard �xed on plinth + �xing bolts Do not �x the bollard directly on the ground
MiniSilvia - MiniSilvia on post
Electronic ballast
MiniSilvia on post - H. 950 mm - Transparent Glass - 360° Emission
Accessories: MiniSilvia - MiniSilvia on post
21 BASE PLATE AND FIXING BOLTS 174 x h 200mm
260HIGH RESISTANCE IN-GROUND FIXING BASE
Incorrect Fixing MethodDo not fi x the bollard directly on the ground
Correct Fixing MethodBollard fi xed on plint + suitable installation screws
Correct Fixing MethodBollard fi xed on plinth + fi xing bolts
230
65
METAL HALIDE VERSION:Class A+HIT-CE/G12
A+
HALOGEN VERSION:Class DQT32/E27
D
Silvia - Silvia on post
EU Regulation 874/2012 - Illumination equipment energy classes
.1 White .6 Grey .3 Anthracite .18 Deep Brown.4 Black
• Cylindrical light for installation on wall, ceiling and floor or as a bollard light – surface.
• Configuration: die-cast aluminium structure, EN AB-47100 alloy (low copper content), extruded aluminium pole (version “on post”). Borosilicate diffuser: transparent or sandblasted.
• Double layer coating for high resistance to corrosion: the aluminium components are painted with a doublecoat using powders which are compliant with QUALICOATstandards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a secondfinishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminium fitting starts from components which have been sandblasted in advance to make the surface more porousand increase the adherence of the paint. Ares effectsalkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
• Protection rating: IP65• In compliance with EN 60598-1 standards• Class of insulation: I• Installation: Silvia: the luminaire is equipped with one M20
cable gland (6<Ø<12mm cables) placed under the head of the luminaire. Silvia on post: the luminaire is equipped with a piece of cable and a watertight 3-ways connector (forcables 5<Ø<13mm) for direct or end-to-end connection.
• Outdoor use requires suitable flexible cables. We recommend installation on a concrete basement orsurface, directly with bolts or through the dedicated fixing plate (to be ordered separately).
• We recommend the use of a connection system with aprotection degree greater than or equal to the protectiondegree of the luminaire.
• During the installation and the maintenance of the fixtures it is important to be careful and avoid damages on the paint coating. Damages on the coating exposed to outdoor conditions orwater, could cause corrosion.Chemical substances affect the anticorrosion coveringprotection.
Bollard Light Wall fitting
Ceiling fitting The fitting is equipped with 1 cable input
Protection againstimpact.IK 07 - 2,00 joule
Pre-wired with approx 150mm of cable
METAL HALIDE VERSION:Class A+ HIT-CE/G12
HALOGEN VERSION:Class D QT32/E27
SILVIA_SILVIA ON POST
.12 Forest Green
C0 / C180 C90 / C270
cd / 1000 lm -2-4 20m
2
0
Lux
4-2
90°
120°
60°80
179
5
C0 / C180 C90 / C270
cd / 1000 lm -2-4 20m
2
0
Lux
4-2
90°
120°
60° 90 5
917
245
Ø 180
54
853521 HIT-CE 35W G12
65
65
C0 / C180 C90 / C270
cd / 1000 lm -2-4 20m
2
0
Lux
4-2
90°
120°
60°80
6
11
1621
C0 / C180 C90 / C270
cd / 1000 lm -2-4 20m
2
0
Lux
4-2
90°
120°
60° 90
6
1121
26
700
Ø 180
54
Ø 220
853575 HIT-CE 35W G12
C0 / C180 C90 / C270
cd / 1000 lm 20m
2
0
Lux
-2-4 4-2
90°
120°
60°80
3 57
C0 / C180 C90 / C270
cd / 1000 lm 20m
2
0
Lux
-2-4 4-2
90°
120°
60° 90
611
2126
120
0
Ø 180
54
Ø 220
853576 HIT-CE 35W G12
65
Silvia - Silvia on post
Silvia - Sandblasted Glass - 120° Emission
Silvia - Sandblasted Glass - 120° Emission
850121 QT 32 100W E27Lamp max size: Ø40 mm H.125 mm
850175 QT 32 100W E27Lamp max size: Ø40 mm H.125 mm
Silvia on post - H. 1200 mm - Sandblasted Glass - 120° Emission
850176 QT 32 100W E27Lamp max size: Ø40 mm H.125 mm
C0 / C180 C90 / C270
cd / 1000 lm 20m
2
0
Lux
-2-4 4-2
90°
120°
60°60
11
21
31
C0 / C180 C90 / C270
cd / 1000 lm 20m
2
0
Lux
-2-4 4-2
90°
120°
60°90
21
41
61
C0 / C180 C90 / C270
cd / 1000 lm 20m
2
0
Lux
-2-4 4-2
90°
120°
60°90
21
41
6181
120
0
Ø 180
54
Ø 220
853570 HIT-CE 35W G12
857170 HIT-CE 70W G12
C0 / C180 C90 / C270
cd / 1000 lm 20m
2
0
Lux
-2-4 4-2
90°
120°
60°60
16
3146
C0 / C180 C90 / C270
cd / 1000 lm 20m
2
0
Lux
-2-4 4-2
90°
120°
60°90
2141
6181
700
Ø 180
54
Ø 220
857169 HIT-CE 70W G12
65
65
Silvia - Silvia on post
Silvia on post - H. 700 mm - Transparent Glass - 120° Emission
Silvia on post - H. 1200 mm - Transparent Glass - 120° Emission
850169 QT 32 100W E27Lamp max size: Ø40 mm H.125 mm
850170 QT 32 100W E27Lamp max size: Ø40 mm H.125 mm
Silvia - Silvia on post
acc. code
prod. code 21 260
850121
850167 • •850168 • •850169 • •850170 • •850175 • •850176 • •853521
853567 • •853569 • •853570 • •853575 • •853576 • •857169 • •857170 • •
200
174 40
0
Ø 180
Ø 220
Incorrect Fixing MethodCorrect Fixing Method Correct Fixing MethodBollard �xed on plinth + plug Bollard �xed on plinth + �xing bolts Do not �x the bollard directly on the ground
Silvia - Silvia on post
Accessories: Silvia - Silvia on post
21 BASE PLATE AND FIXING BOLTS 174 x h 200mm
260HIGH RESISTANCE IN-GROUND FIXING BASE
Incorrect Fixing MethodDo not fi x the bollard directly on the ground
Correct Fixing MethodBollard fi xed on plint + suitable installation screws
Correct Fixing MethodBollard fi xed on plinth + fi xing bolts
www.flos.com