Silent Night BraceletAn enchanting bracelet for an enchanted holiday eveningDeSigN By Tracy gonzales (for Tierracast®)

Instructions:

• Create your elements. Using a TierraCast Picture Frame Template, cut 3 squares of fab-ric and use a small amount of adhesive to glue into the Simple Square Link frames. Cre-ate 3 serpentine shapes using 24ga headpins. Shape and trim to fit into frames. Texture with the chasing hammer if desired. Glue 1 serpentine shape, 1 of each heishi, and 1 flat back crystal into each frame. Allow to dry. String a 4mm crystal on an eyepin and form simple loop. Repeat with 8 remaining eyepins to create 9 links. String last 4mm crystal on a headpin and form wrapped loop.

• Assemble your bracelet. Use the 2mm x 3.2mm 20ga jumprings to connect the elements. Attach the clasp ring to a frame, and attach the single loop side of a Beaded 3-1 link to the other side of the frame. On the 3-loop side, use 3 eyepin/crystal links to attach a second Beaded 3-1 link. Attach a second frame, and repeat this process with remaining elements. Use 3 jumprings to attach the clasp bar at the end. Add star drops and the crystal dangle to the ends of the bracelet as desired.

TCi114

What You’ll Need:

TierraCast Parts:1 Deco Square Clasp Set

94-6048-12

3 Simple Square Link 94-3113-61

6 Beaded 3-1 Link 94-3055-12

1 Faceted Star Drop 94-2066-12

1 Open Star Drop 94-2106-61

3 7mm Star Heishi 93-0417-12

3 3mm Beaded Heishi 93-0418-12

3 3.5mm Beaded Sq. Heishi 93-0430-12

11 2mmx3.2mm 20ga jumprings 01-0016-01

9 2” 21ga eyepins 01-0027-01

4 2” 24ga Headpins 01-0029-01

Additional Materials: A remnant of dark blue

velvet fabric

3 Swarovski flat back crystals in Light Sapphire

4 Swarovski 4mm bicone crystals in Crystal AB

Diamond glaze adhesive (or similar)

Tools: Chain-nose pliers

Round-nose pliers

Wire cutters

Chasing hammer and bench block (optional)

Finished Size: 7.5”

Lead Free Pewter ~ Made in the USA ~ Precious Metal Plated

PROJECT SHEET