SikaBond - Adhesive Systems for Floor Coverings · Sika’s Adhesive Range for Floor Coverings...

12
since 1910 Innovation & Consistency since 1910 Innovation & Consistency SikaBond ® – Adhesive Systems for Floor Coverings

Transcript of SikaBond - Adhesive Systems for Floor Coverings · Sika’s Adhesive Range for Floor Coverings...

Page 1: SikaBond - Adhesive Systems for Floor Coverings · Sika’s Adhesive Range for Floor Coverings SikaBond® Lino-1 One-part, solvent-free and very strong initial grab dispersion adhesive

s i n c e 1 9 1 0

Innovat ion & Consistency

s i n c e 1 9 1 0

Innovat ion & Consistency

SikaBond® – Adhesive Systems for Floor Coverings

Page 2: SikaBond - Adhesive Systems for Floor Coverings · Sika’s Adhesive Range for Floor Coverings SikaBond® Lino-1 One-part, solvent-free and very strong initial grab dispersion adhesive
Page 3: SikaBond - Adhesive Systems for Floor Coverings · Sika’s Adhesive Range for Floor Coverings SikaBond® Lino-1 One-part, solvent-free and very strong initial grab dispersion adhesive

2 I 3

Sika has an extensive range of products for use in many different types of flooring sys-tems including concrete and resin floor build-ups, plus adhesives for all types of floor cov-erings.

Whether you are looking for the best adhesive solution for vinyl, carpets, linoleum or cork underlayment, adhesives and grouts for tiles or natural stone, elastic adhesives for wood floors; if you want a resin flooring system for an industrial area, or a resilient comfort floor for reduced footfall noise – Sika is able to provide a suitable solution.

With additional ancillary products such as self-levelling underlayments, substrate seal-ing primers, moisture barriers and unique ap-plication equipment, Sika can technically and practically fulfil almost any special flooring requirements on-site.

Sustainable and innovative Sika solutions can also help to improve working conditions, ac-celerate construction programmes and there-fore also significantly reduce costs.

The latest additions to the Sika flooring range are SikaBond® adhesives for different types of floor covering materials.

On the following pages of this brochure this Sika product line will be introduced and ex-plained in more detail.

Sika’s Comprehensive Competence in Flooring

Page 4: SikaBond - Adhesive Systems for Floor Coverings · Sika’s Adhesive Range for Floor Coverings SikaBond® Lino-1 One-part, solvent-free and very strong initial grab dispersion adhesive

Sika’s Adhesive Range for Floor Coverings

SikaBond® Lino-1One-part, solvent-free and very strong initial grab dispersion adhesive for linoleum coverings

Uses n Linoleum in rollsn Cork underlayments n Suitable for absorbent subfloors

SikaBond® Vinyl-1

One-part, solvent-free and one-side pressure sensitive dispersion adhesive for vinyl coverings

SikaBond® Carpet-1One-part, solvent-free dispersion adhesive for fitted carpeting

Advantages n Secure and problem-free adhesion

(even linoleum with high internal stresses)n Easy to apply and long open timen Solvent-free and low emissions (EC-1)n Compatible with underfloor heatingn Suitable for furniture with castors

Advantages n Wide range of applicationsn High initial grip, high adhesive bondn Very good resistance to softening agentsn Very easy to apply and very long open timen Solvent-free and very low emissions (EC-1 Plus)n Compatible with underfloor heatingn Suitable for furniture with castors

Advantages n Good cost-performance ration Very strong initial adhesive grabn Easy to apply and high adhesionn Solvent-free and low emissions (EC-1)n Compatible with underfloor heatingn Suitable for furniture with castors

Uses n PVC floor coverings in sheets and tilesn PVC design floor coveringsn Heterogeneous PVC floor coverings, also with fleece backingn CV (cushioned vinyl) floor coverings, also with fleece backingn Carpets with synthetic backingn Carpets with fleece backingn Suitable for absorbent and non-absorbent subfloors

Uses n Carpets with synthetic backingn CV light-weight floor coverings with fleece backingn Light weight needle feltsn Filler-free, vapour-permeable textile floor coveringsn Suitable for absorbent subfloors

Page 5: SikaBond - Adhesive Systems for Floor Coverings · Sika’s Adhesive Range for Floor Coverings SikaBond® Lino-1 One-part, solvent-free and very strong initial grab dispersion adhesive

4 I 5

SikaBond® Carpet UniOne-part, solvent-free, very strong initial grab dispersion adhesive for fitted carpeting

One-part, solvent-free, strong initial grab dispersion adhesive for fitted carpeting, CV and PVC coverings, rubber and linoleum

Advantages n Wide range of applicationsn Very strong initial adhesive grabn Very high bond strengthn Extremely long open time n Easy to applyn Solvent-free and low emissions (EC-1)n Compatible with underfloor heatingn Suitable for furniture with castors

Advantages n Wide range of applicationsn Strong initial adhesive grabn Good resistance against plasticizern Very easy to applyn Solvent-free and low emissions (EC-1)n Compatible with underfloor heatingn Suitable for furniture with castors

Uses n Carpets with synthetic backingn Carpets with fleece backing n CV (cushioned vinyl) floor coverings with fleece backingn Needle feltsn Natural fibre floor coverings with latex backingn Suitable for absorbent subfloors

Uses n Ground rubber floor coverings in sheets and tilesn PVC floor coverings in sheets or tiles,

PVC design floor coveringsn CV floor coveringsn PVC composite floor coverings with polyester or

mineral fibre backingn Linoleum in sheets/rollsn Carpets with different types of backingn Needle feltsn Suitable for absorbent subfloors

SikaBond® Floor Uni

Page 6: SikaBond - Adhesive Systems for Floor Coverings · Sika’s Adhesive Range for Floor Coverings SikaBond® Lino-1 One-part, solvent-free and very strong initial grab dispersion adhesive

Application Matrix and Product Properties

Adhesive TypesThere are two different types of SikaBond® floor covering adhesives: ‘Wet’, and ‘dry’ (also known as ‘pressure-sensitive’) adhesives. The ‘wet’ adhesives have shorter flash-off times and the floor coverings have to be installed immediately, at the latest 30 minutes after application of the adhe-sive. The ‘dry’ or ‘pressure-sensitive’ adhesives have longer flash-off times and remain ‘tacky’ even after the complete evaporation of water from the adhesive.

Sika Products SikaBond® Lino-1 SikaBond® Vinyl-1 SikaBond® Carpet-1 SikaBond® Carpet Uni SikaBond® Floor Uni

General description of the adhesives Wet adhesive for linoleum on

absorbent substrates

Pressure sensitve adhesive for PVC/CV on absorbent or non- absorbent substrates

Wet adhesive for carpets on absorbent

substrates

Wet adhesive for carpets/allrounder on absorbent substrates

Wet adhesive for all types of floor coverings on

absorbent substrates

Floo

r Cov

erin

gs

Linoleum sheets • •

Cork underlaym. all types • •

PVC all types • •

CV (Cushioned Vinyl)

with fleece • • • •

without fleece • •

Carpet

with synthetic back

• • • •

with PVC back • •

needle felts • ( • ) • •

with fleece, woven or natural fibres

• • •

Rubber floor all types •

For stairs and skirting all types •

Properties SikaBond® Lino-1 SikaBond® Vinyl-1 SikaBond® Carpet-1 SikaBond® Carpet Uni SikaBond® Floor Uni

Flash-off time max.15 min 10 – 60 min 5 – 20 min 5 – 20 min 10 – 30 min

Installation time ~ 15 min ~ 60 min ~ 20 min ~ 30 min ~ 30 min

Drying time ~ 24 h ~ 24 h ~ 48 h ~ 48 h ~ 48 – 72 h

Notched trowel* TKB/B1 TKB/A1, A2, B1 TKB/B1 TKB/B1, B2 TKB/A1, A2, B1, B2

Consumption ~ 390 – 450 g/m² ~ 230 – 490 g/m² ~ 450 g/m² ~ 450 g/m² ~ 250 – 490 g/m²

Dependent on the backing of the floor covering (PVC, rubber, fleece, syn-thetic or jute fabric, etc.) the most suitable adhesive must be selected. The environmental conditions and the absorbency of the subfloor must also be considered because of their major influence on flash-off, installation and drying times.

*Also dependent on the type of backing of the floor covering material and the nature of the substrate.

All indicated times may vary according to environmental conditions and the subfloor absorbency.

• recommended ( • ) only suitable for light-weight needle felts

Page 7: SikaBond - Adhesive Systems for Floor Coverings · Sika’s Adhesive Range for Floor Coverings SikaBond® Lino-1 One-part, solvent-free and very strong initial grab dispersion adhesive

4 I 5

Page 8: SikaBond - Adhesive Systems for Floor Coverings · Sika’s Adhesive Range for Floor Coverings SikaBond® Lino-1 One-part, solvent-free and very strong initial grab dispersion adhesive

Typical Floor Covering System Build-Ups

Continuous refurbishment works, tight time schedules and difficult sur-faces are just a few of the challenges we have to face on today’s projects. Sika can help to simplify the work and speed up the construction pro-gramme. With proven, technically correct and innovative products Sika is able to provide solutions for almost every situation or problem that can occur on a flooring project.

1. Cement based screed correctly prepared

2. Before the application of SikaBond® the use of primer Sika® Level-01 Primer is recommended to reduce suction.

3. SikaBond® adhesive

4. Floor covering

1. Calciumsulphate-based screed, stone wood, magnesite or other substrates

2. Acrylic primer Sika® Level-01 Primer

3. Self-levelling mortar Sika® Level (at least 2 mm thick and for rubber flooring at least 3 mm)

4. SikaBond® adhesive

5. Floor covering

Floor Coverings on Absorbent Subfloors

All of these Sika products are part of an overall system and are designed to be fully compatible with each other. The following outline system de-scriptions are a selection of 5 of the most commonly used build-ups. For further information on these and other flooring system build-ups, please contact your local Sika Technical Services Department.

Floor Coverings on Non-Absorbent or Moisture Sensitive Surfaces

Page 9: SikaBond - Adhesive Systems for Floor Coverings · Sika’s Adhesive Range for Floor Coverings SikaBond® Lino-1 One-part, solvent-free and very strong initial grab dispersion adhesive

H²O

8 I 9

1. Existing screed with adhesive residues (at least 50% of the residues must be removed in a chequered pattern)

2. 2-component primer Sika® Primer MB or Sika® Primer MR Fast (broadcast with sand)

3. Self-levelling mortar Sika® Level (at least 2 mm thick and for rubber flooring at least 3 mm)

4. SikaBond® adhesive

5. Floor covering

1. Cement based screed correctly prepared

2. Waterbased primer Sika® Level-01 Primer

3. Self-levelling mortar Sika® Level (from 2 up to 40 mm, dependent on the thickness required and the product selected, for rubber flooring at least 3 mm)

4. SikaBond® adhesive

5. Floor covering

1. Cement based screed correctly prepared

2. 2-component primer Sika® Primer MB or Sika® Primer MR Fast (broadcast with sand)

3. Self-levelling mortar Sika® Level (from 2 to 40 mm thickness as required, for rubber flooring at least 3 mm)

4. SikaBond® adhesive

5. Floor covering

Floor Coverings on Adhesive Residues

Floor Coverings on Uneven and Dry Subfloors

Floor Coverings on Even or Uneven Subfloors with a High Moisture Content (≤ 4% CM)

Page 10: SikaBond - Adhesive Systems for Floor Coverings · Sika’s Adhesive Range for Floor Coverings SikaBond® Lino-1 One-part, solvent-free and very strong initial grab dispersion adhesive

Additional Sika® Flooring Solutions

Solutions for Surface Preparation

Solutions for Wood Floor Bonding

Solutions for Tiling

Solutions for Resin Floors

Solutions for Joint Sealing

Page 11: SikaBond - Adhesive Systems for Floor Coverings · Sika’s Adhesive Range for Floor Coverings SikaBond® Lino-1 One-part, solvent-free and very strong initial grab dispersion adhesive

10 I 11

Sika® Level and Sika® PrimerSika® Level cementitious underlayment mortars for levelling-up uneven substrates provide a very smooth surface and therefore also lower the consumption of the floor covering adhesive. The Sika® Level solutions can be applied at layer thicknesses up to 40 mm with very low emissions and the range includes primers for use as sealers and / or moisture barriers below the underlayment mortars.

SikaBond®

Low emissions, ease of use and excellent adhesion were also important factors when Sika devel-oped wood floor bonding adhesives for today’s market. With special solutions for sound damping, our extensive range of elastic adhesives, moisture barriers, environmentally friendly primers and ergonomic application equipment such as the SikaBond® Dispenser, Sika shows compe-tence and responsibility.

SikaCeram®

Tile adhesives and grouts are an important part of the Sika flooring product range. The products are also designed to be compatible for use in conjunction with Sika’s wet-room waterproofing systems, ready mix floor screeds and Sikaflex® or Sikasil® elastic jointing solutions. Therefore Sika is well positioned and able to meet all of our customers requirements on site, and with fully compatible systems.

Sikafloor® Comprehensive resin flooring solutions from Sika allow the creation of an almost unlimited combination of functional and aesthetic floors. Sika provides decorative resin comfort floors for commercial, health, educational and residential buildings, plus industrial resin floors with high mechanical and chemical resistance. The range also includes special solutions for car parks, the food industry, clean rooms and many other demanding and specific applications.

Sikaflex® Sika’s R&D invented 1-part polyurethane sealants and today these have been developed with the experience from more than 50 years of joint sealing around the world. The extensive range of well proven Sikaflex® products now provides floor joint sealing solutions that are easy to apply, and with high mechanical resistance, which guarantees a long service-life and low main-tenance costs for your projects.

Page 12: SikaBond - Adhesive Systems for Floor Coverings · Sika’s Adhesive Range for Floor Coverings SikaBond® Lino-1 One-part, solvent-free and very strong initial grab dispersion adhesive

s i n c e 1 9 1 0

Innovat ion & Consistency

Joint Sealing

Sikaflex®

Sikasil®

Grouting

Sikadur®

SikaGrout®

Roofing

Sarnafil®

Sikaplan®

SikaRoof® MTC®

Waterproofing

Sikaplan®, Sikalastic®

Sika® & Tricosal® Water stopsSika® Injection Systems

Concrete Production

Sika® ViscoCrete®

Sika® Retarder®

Sika® SikaAer®

Flooring

Sikafloor®

SikaBond®

Concrete Repair and Protection

Sika® MonoTop®

Sikagard®

Sikadur®

Corrosion and Fire Protection

SikaCor®

Sika® Unitherm®

Structural Strengthening

Sika® CarboDur®

SikaWrap®

Sikadur®

Sika Full Range Solutions for Construction

Also Available from Sika

© S

ika

Serv

ices

AG

/ BU

Cont

ract

ors

/ Sea

ling

and

Bond

ing

/ Sik

aBon

d –

Adhe

sive

s fo

r Flo

or C

over

ings

/ 01

.201

2 / R

B

Sika Services AGBusiness Unit ContractorsSpeckstrasse 22CH-8330 PfäffikonSwitzerlandPhone +41 58 436 23 80 Fax +41 58 436 23 77www.sika.com

Our most current General Sales Conditions shall apply. Please consult the Product Data Sheet prior to any use and processing.

s i n c e 1 9 1 0

Innovat ion & Consistency

Elastic Wood Floor Installations in Hotels and Commercial BuildingsIncreased Possibilities for Architects

s i n c e 1 9 1 0

Innovat ion & Consistency

Sika Competence for the Elastic Bonding of Solid Wood Floors

Cons

truc

tion

SikaBond® Dispenser-5400 and SikaBond®-T52 FC

SikaBond® Dispenser-5400 and SikaBond®-T52 FC

S&W

09.

05 /

05SI

C 21

.37

/ © S

ika

Serv

ices

AG,

Switz

erla

nd

Cer

tified Quality System

ISO

9001/ EN 29001

since 1986

Cer

tifie

d Management System

ISO 14001

since 1997

Sika Services AGCorporate ConstructionCH-8048 ZürichSwitzerlandPhone +41 44 436 40 40Fax +41 44 436 46 86 www.sika.com

Your local Sika Company

Our most current General Sales Conditions shall apply. Please consult the Product Data Sheet prior to any use and processing.

Cons

truc

tion

®

Also available from Sika

The Evolution in Wood Floor Bonding