Signal Flow Chart
5
CONSOLE AUDIO INTERFACE DAW CONTROL ROOM LIVE ROOM BOX 2 BOX 1 AD 1-8 AD 9-16 AD 17-24 MTK 25-32 MTK 33-40 MTK 41-48 ADAT ADAT ANALOG CUE MIX 1 CUE MIX 2 CUE MIX 3 CUE MIX 4 AUX 9 AUX 10 AUX 11 AUX 12 FX1 FX2 FX3 FX4 FX5 FX6 FX7 FX8 AUX 1 AUX 2 AUX 3 AUX 4 AUX 5 AUX 6 AUX 7 AUX 8 ANY 2 Channels PRE FADER SENDS POST FADER SENDS CONTROL ROOM SOURCE 1-8 LIVE ROOM SOURCE 9-24 THUNDERBOLT TO FIREWIRE STEREO BUS MONITORS 1
description
Signal flow chart
Transcript of Signal Flow Chart
CONSOLE
AUDIO INTERFACE
DAWCONTROL ROOM LIVE ROOM
BOX 2
BOX 1AD 1-8
AD 9-16
AD 17-24
MTK25-32
MTK33-40
MTK41-48
ADAT ADATANALOG
CUE MIX 1
CUE MIX 2
CUE MIX 3
CUE MIX 4
AUX 9
AUX 10
AUX 11
AUX 12
FX1
FX2
FX3
FX4
FX5
FX6
FX7
FX8
AUX 1
AUX 2
AUX 3
AUX 4
AUX 5
AUX 6
AUX 7
AUX 8
ANY 2 Channels
PRE FADER SENDSPOST FADER SENDS
CONTROL ROOM SOURCE1-8
LIVE ROOM SOURCE9-24
THUNDERBOLT TO FIREWIRE
STEREO BUS
MONITORS
1
CONSOLE
AUDIO INTERFACE
DAWRECORDING-MONITORING PATH
CONTROL ROOM SOURCE1-8
LIVE ROOM SOURCE9-24
1. MIC-LINE INPUT in Console / Interface
2. Check METER
3. Into DAW via DIRECT OUT (Pre EQ on console)
4. Create track (mono/stereo)
5. Choose INPUT
6. Choose OUTPUT
7. RECORD ENABLE to receive input level
8. Check Protools METER
9. Monitor the signal at the RECORDING PATH
10. Monitor the signal at the MONITOR PATH
You are now ready to record!!!STEREO
BUS
REC PATH
MON PATHMONITORS
2
CONSOLE
AUDIO INTERFACE
DAWCUE MIXES
MTK25-32
MTK33-40
MTK41-48
ADAT ADAT
CUE MIX 1
CUE MIX 2
CUE MIX 3
CUE MIX 4
AUX 9
AUX 10
AUX 11
AUX 12
PRE FADER SENDS
1. From the MTK RETURNS choose the channel you want to send to the CUE MIX
2. Select CUE MIX (AUX 9-12) and make it PRE FADER
3. Via the encoder, SEND signal
4. Check MASTER AUX
5. Do the same for any channel you need to go into Cue mixes
CONTROL ROOM LIVE ROOM
3
CONSOLE
AUDIO INTERFACE
DAWFX SENDS & RETURNS LIVE ROOM
BOX 2
BOX 1AD 1-8
AD 9-16
AD 17-24
MTK25-32
MTK33-40
MTK41-48
ADAT ADATANALOG
FX1
FX2
FX3
FX4
FX5
FX6
FX7
FX8
AUX 1
AUX 2
AUX 3
AUX 4
AUX 5
AUX 6
AUX 7
AUX 8
FX RETURNS (2-Channels in the console)
POST FADER SENDS
CONTROL ROOM SOURCE1-8
LIVE ROOM SOURCE9-24
THUNDERBOLT TO FIREWIRE
1. From the MTK RETURNS choose the channel you want to send to the FX processors
2. Select FX from library, choose path (AUX 1-8) and make it POST FADER
3. Via the encoder, SEND signal
4. Check MASTER AUX
5. Input patch the FX returns into 2 channels on the console
4
CONSOLE
FX SENDS & RETURNS into CUE MIX
MTK25-32
MTK33-40
MTK41-48
FX1
FX2
FX3
FX4
FX5
FX6
FX7
FX8
AUX 1
AUX 2
AUX 3
AUX 4
AUX 5
AUX 6
AUX 7
AUX 8
FX RETURNS (2-Channels in the console)
POST FADER SENDS
1. From the MTK RETURNS choose the channel you want to send to the FX processors
2. Select FX from library, choose path (AUX 1-8) and make it POST FADER
3. Via the encoder, SEND signal
4. Check MASTER AUX
5. Input patch the FX returns into 2 channels on the console
6. Select the FX returns channels and send them into desired CUE MIX (AUX 9-12)
5
