Siemens RTU Units

7/25/2019 Siemens RTU Units

1/16

Industry

RTUs for industrySiemens Industry The One-Stop-Shop for RTUs

Answers for industry.

BrochureMarch2013

Siemens AG 2013


2/16

RTUs from Siemens Industry2

RTUs from Siemens IndustrySiemens Industry offers our customersthe whole product and service portfolio for RTUs

SIMATIC The faster, more cost-effective route to an

optimum solution

Users know that they will always get the highest possibleintegration with SIMATIC the core of Totally IntegratedAutomation.

Plus, the systems scalability allows users to customizesolutions to their own unique requirements very quickly and

cost efficiently, and provides genuine forward compatibilityfor maximum investment protection and all programmingand applications are conform to IEC 61131-3 and IEC 61499Standards for ease of engineering and application portability.

Siemens process instrumentation

Our comprehensive process instrumentation portfolio offersbest-in-class transmitters for the widest range of applications.Whether you want to measure pressure, temperature, flowor level, we offer a unique portfolio of process instruments.To complement our range, we also offer electropneumaticpositioners, process controllers and process recorders.

Complete

solution

Lifecycle management

Engineering /

Commissioning

Products

Documentation Training

Factory

Acceptance Test/

Site Acceptance Test

(FAT/SAT)

Service Support

I/O

Remote

Terminal

Units (RTU)SCADA

Communi-

cation

Field

instrumen-

tation

Spare

parts

Siemens AG 2013


3/16

Integration in Process Control 3

Integration in Process Control

SIMATIC WinCC/PCS 7 TeleControl system architecture

Integration of the telecontrol technology in TIA has madeit possible to combine the automation of central plants andthe monitoring of distributed units in a single process controlsystem.

Homogenous operator control and monitoring using acommon control station, uniform configuration with the sameengineering system, and consistent utilization of hardwarecomponents from the TIA product portfolio result in significantsavings with regard to investments, operation and service.

Remote terminal units

The remote control units supported by SIMATIC have aperformance, classified as small, medium or large (see tableon page 5).

In addition, the SIMATIC S7-300 F and S7-400 F controllers canbe used to implement safety-related applications on site andautomatically set the plant to a safe status in the event of adangerous fault. And with SIMATIC S7-400FH fault tolerantand safety-related RTU applications can be realized.

And when talking about safety Siemens fulfills the interna-tional standards like IEC 61508, IEC 61511, ISA S84 and isSIL 3 TV certified.

The globally field proven Telecontrol Interface Modules (TIM)from SIMATIC handle the data exchange between remotesystems and master system and offer a wide range of com-fortable telecontrol functions like subscriber monitoring,redundancy of transmission paths, cross communication,or remote engineering in parallel to the normal data

communication, all these independent from the usednetwork types.

SIPLUS RIC (Remote Interface Control) is a telecontrol systemthat operates with the SIMATIC S7 automation system usinginternationally standardised communications protocols for:

Serial transmission IEC 60870-5-101 Ethernet (TCP/IP) IEC 60870-5-104 Protective device IEC 60870-5-103

WANWAN

TIM 4R-IE

SINAUT ST7

S7-400 +

TIM 4R-IE

S7-300 +

TIM 3V-IE

Advanced

S7-400 +

TIM 4R-IE

S7-300 +

TIM 3V-IE

WANWAN

DNP3

S7-300 +

TIM 3V-IE

DNP3

S7-400/400H +

TIM 4R-IE

DNP3

WANWAN

IEC 60870-5-104

or Modbus

IEC 60870-5-101

or Modbus

S7-300 +

CP343 or

PN interface

S7-300 +

CP 341

ET 200S with

PN CPU+1SI

ET 200S with

CPU+1SI

S7-400/400H +

CP 443 or

PN interface

S7-400/400H +

CP 441/

CP 341

TeleControl

OS Server

Modem

TCP/IP

communication

Serial

communication

Engineering Station

OS Clients

OS Single Station

(dedicated or

dual channel)

Widely distributed

TeleControl

outstations

Widely distributed

TeleControl

outstations

Widely distributed

TeleControl

outstations

Modem

TCP/IP

communication

Serial

communication

TCP/IP

WAN router

Converter

TCP/IP - serial

Third-party

RTU

Modem

TCP/IP

communication

Serial

communication

TCP/IP

WAN router

Converter

TCP/IP - serial

Third-party

RTU

Third-party

RTU

Siemens AG 2013


4/16

Classification of the remote terminal units4

Classification of the remote terminal units

RTU Applications Possible protocols Message buffer size

RTU Small: SIMATIC S7-1200 controller

RTU with 30 ... 150 I/Os

For small-sized applications andcost-sensitive applications

IP-T(IP-Telemetry)

CP 1242-7 buffering:up to 2 000 messages,only available for communi-cation via GPRS

Modbus RTU No buffering

RTU Small: controller integrated in SIMATIC ET 200S (incl. fail-safe application)

RTU with 30 ... 200 I/Os1)

For small-sized applications andcost-sensitive applications

ET 200S for safety-related applica-tions


IEC 60870-5-101 IEC 60870-5-103 IEC 60870-5-104

Approx. 1 600 messages

RTU Medium: SIMATIC S7-300/S7-300F controller

RTU with 100 ... 2 000 I/Os1)

For medium-sized applications;extremely flexible configuration

S7-300F for safety-relatedapplications

SINAUT ST7 TIM module bufferingUp to 60 000 messages3)

DNP3 TIM module bufferingUp to 200 000 data points4)


IEC 60870-5-101 IEC 60870-5-103 IEC 60870-5-104

Up to 25 000 messages2)

RTU Medium: SIMATIC S7-1500 controller

RTU with 100 ... 2 500 I/Os1)

For medium-sized applications;extremely flexible configuration



1)depending on CPU size,protocol type and application

2)1 message can have- 1 single or double point indication- 1 analogue maesurement- 1 transformer step position- 1 integrated totals- 1 bit pattern

3)1 message can have- 32 binary values- 4 analogue values- 1 or 4 counter values- 12 double words- 256 bytes

4)1 data point can have- 1 binary value- 1 analogue value- 1 counter value

Siemens AG 2013


5/16

Classification of the remote terminal units 5

Classification of the remote terminal units

RTU Applications Possible protocols Message buffer size

RTU Large: SIMATIC S7-400/S7-400F controller

RTU with 500 ... 5 000 I/Os1)

For larger applications requiringincreased performance


SINAUT ST7 TIM module bufferingUp to 60 000 messages3)



IEC 60870-5-101 IEC 60870-5-103 IEC 60870-5-104

Up to 25 000 messages1) 2)

RTU Large: SIMATIC S7-400H/S7-400FH controller

RTU with 500 ... 5 000 I/Os1)


S7-400FH for safety-relatedapplications



IEC 60870-5-101 IEC 60870-5-103 IEC 60870-5-104

Up to 25 000 messages1) 2)

RTU based on Embedded Controllers (Microbox, Nanobox, S7-mEC, Panel PC etc.)

RTU with 250 ... 3 000 I/Os1)



IEC 60870-5-101 IEC 60870-5-103 IEC 60870-5-104

Up to 25 000 messages2)

1)depending on CPU size,protocol type and application

2)1 message can have- 1 single or double point indication- 1 analogue maesurement- 1 transformer step position- 1 integrated totals- 1 bit pattern

3)1 message can have- 32 binary values- 4 analogue values- 1 or 4 counter values- 12 double words- 256 bytes

4)1 data point can have- 1 binary value- 1 analogue value- 1 counter value

Siemens AG 2013


6/16

Network topologies, SIPLUS extreme6

Network topologies, SIPLUS extreme

Basic topologies

Differently structured telecontrol networks can be imple-mented in the wide area network (WAN) based on thefollowing four basic topologies.

Media versions

Depending on the support provided by the selected tele-control protocol, various transmission media are availablefor these basic topologies, e.g. dedicated line, private wirelessnetworks, mobile radio networks, dial-up networks (wireless/landline), DSL over Internet.

Combinations of basic topologies and media versions

Through a combination of several basic topologies of the sameor different media versions, it is additionally possible to designmore complex network topologies, even with redundant com-munication paths. This allows adaptation to the respective localconditions and to the existing infrastructure.

NoteSuitable protective measures (among others IT Security,e.g. network segmentation) have to be taken up to ensure

a safe operation of the plant. You find further informationabout the topic of Industrial Security on the Internet underwww.siemens.com/industrialsecurity

RTUs for extreme environmental conditionsParticularly harsh industrial environmental conditions requireproducts with special properties products that are tougher

than the standard. Siemens provides the perfect solution tothese requirements SIPLUS extreme.

Point-to-

point

Multi-point Star Ring

Star viadedicated line

Star via

wireless

Dial-upnetwork via

wireless

Star via

Internet

Star +

multi-point

Complex network structure,example of SINAUT ST7/DNP3

communication

Complex network structure,example of IEC 870-5-104

communication

Nodes Pathredundancy,

1 medium

Pathredundancy,

2 media

Comparison SIMATIC and SIPLUS extreme

Environmental conditions Standard SIMATIC SIPLUS extreme

Climatic conditions 0 ... 60 C(for defined product families) -40/-25 ... +70 C(for defined product families)

Relative humidity 10 ... 95 %, no condensation 100 %, temporary bedewing, condensation and icing are allowedChemical active substances ISA S71.04 G3 EN 60721-3-3 Class 3C4 and ISA S71.04 G3

SO2 10 ppm; 4 daysH2S 1 ppm; 4 days

SO2 4.8 / 14.8 ppm1)

H2S 9.9 / 49.7 ppm1)

Cl 0.2 / 1.0 ppm1)

HCl 0.66 / 3.3 ppm1)

HF 0.12 / 2.4 ppm1)

NH 49 / 247 ppm1)

O3 0.1 / 1.0 ppm1)

NOX 5.2 / 10.4 ppm1)

At RH < 60 %, no condensation At RH < 75 %, condensation allowed; according to EN 60068-2-52

Salt mist test Not approved Approved (EN 60068-2-52, Degree of severity 3)

Mechanic active substances EN60721-3S4 Dust (suspended load) Dust (deposition)

0.2 mg/m1.5 mg/mExcept sand

4.0 mg/m40 mg/mincl. sand/dust (EN 60721-3-3 Class 3S4)

Biologic active substances

EN60721-3B2

Not approved Mold growth, fungus

Except fauna (EN 60721-3B2), pending

1) Continuous operation / Maximum permissible (30 min/day)

Siemens AG 2013


7/16

Process Instrumentation and Process Analytics in RTU applications 7

Process Instrumentation and Process Analyticsin RTU applications

Precision and reliability

The clear focus of our products is on precise measuring resultsand reliable control of all processes in your factory. We offeryou a comprehensive portfolio suitable for all applications andindustries with reliability and precision you can depend on.

Measuring and detecting

SITRANS T (temperature)

The SITRANS T family of products is a range of professionaldevices for temperature measurement, even under extremeconditions from simple to highly complex applications.For versatile use in all industrial areas, we offer transmitters

which can be mounted in different ways (in the connectionhead, on a mounting rail or in the field housing) and ensuremaximum measuring precision.

SITRANS P (pressure)

SITRANS P is a complete family of measuring instrumentsfor measuring relative, differential and absolute pressure.All transmitters, whether digital or analog, offer a convincingperformance thanks to their perfect safety concept andease of use, as well as their measuring precision andrugged design.

SITRANS L (level)

For detecting limit levels as well as for continuous procedures,we offer a full range of level measurement technologiesand devices. With capacitance and electromechanicallevel switches, you can precisely detect the level of solids,liquids and slurries in many industrial fields of operation.For continuous measurements, our product portfolioencompasses radar, guided wave radar, capacitance,electromechanical, gravimetric, ultrasonic, and hydrostatictechnology for unbeatable measuring performance in liquids,slurries and solids.

SITRANS F (flow)

Choosing the right flowmeter for the right application can

dramatically improve your bottom line. Designed for all indus-trial sectors, the Siemens SITRANS F family encompasses alarge selection of flowmeters based on different principles ofmeasurement: electromagnetic, coriolis, ultrasonic (in-line orclamp-on), vortex, rotary piston and differential pressure flow-meters.

Controlling

The SIPART PS2 is a high-precision positioner for controllingvalves or flaps and is by far the best electropneumatic posi-tioner on the market. Numerous new diagnostic functions,including the partial stroke test, have been integrated in the

SIPART PS2 in order to detect valve and operating mechanismfaults.

Analyzing

Siemens is a leading supplier of process analyzers and processgas analysis systems. Here, engineering and the continuousdevelopment of our products are based on precise measuringof components in many different processes. In process gaschromatography, we utilize the latest microsystems technolo-gy as well as our tried-and-tested gas chromatography units,which are designed for complex tasks.

Siemens AG 2013


8/16

Selection assistant for RTUs based on standard PLCs from Siemens Industry8

Selection assistant for RTUs based onstandard PLCs from Siemens Industry

PLCs from Siemens Industry,

well-known as SIMATIC Controllers

The innovative solution for all automation tasks

SIMATIC Controllers are the global Number 1 for all automa-tion requirements. They offer a host of integral functions andcan be finely scaled with regard to performance.

1)only for GPRS, not for extreme environmental conditions 2)via ET 200M/ET 200iSP 3)via ET 200iSP 4)full device redundancy available

RTU

Hard-

wired

I/O

Fieldbus Communication protocols

Powersupplyredundancy

AI,AO,DI,DO

HART

FOUNDATIONFieldbus

PROFIBUSDP/PA

PROFInet

Connectionofauxiliary

systemswithModbus

LocalHMI

IP-T(IP-Telemetry)

SINAUTST7(serialorTCP/IP)

DNP3(serialorTCP/IP)

ModbusRTUserial

ModbusRTUTCP/IP

IEC60870-5-101serial

IEC60870-5-103

protectionrelay

IEC60870-5-104TCP/IP

IEC61850

S7-1200 4 4 4 4 4 4

1) 4 4

ET 200S

4 4 4 4 4 4 4 4 4 4

S7-300

4 4 4 4 4 4 4 4 4 4 4 4 4 4

S7-1500

4 43) 4 4 4 4 4

S7-400

4 4 42)

4 4 4 4 4 4 4 4 4 4 4 4 4

S7-400F

4 4 42)

4 4 4 4 4 4 4 4 4 4 4 4 4

S7-400FH

4 4 42)

4 4 4 4 4 44)

4 4 4 4 4 4

Siemens AG 2013


9/16

Selection assistant for RTUs based on standard PLCs 9

Selection assistant for RTUs based onstandard PLCsfrom Siemens Industry

SIMATIC Controllers are based on different hardware andsoftware architectures: SIMATIC Modular Controllers SIMATIC Embedded Controllers

There are failsafe and fault-tolerant versions available forapplications with high safety requirements. Controllers withintegrated and/or distributed I/O complete our product range.

Private networks Public networks Extreme

environmental

condition

RTURadio

Dedicatedline

WLAN

GPRS

EGPRS

UMTS

DSL

AmericanGasAssociation(AGA)

IndustryLibrary(IL)

Logicaluserapplications

Failsafe

IEC61850-8MMS(Manufac-

toringMessageSpecification)

Aggressiveenvironmental

Condensation/icing

4 4 4 4

S7-1200

4 4 4 4 4 4 4 4 4 4 4 4 4 4

ET 200S

4 4 4 4 4 4 4 4 4 4 4 4 4 4

S7-300

4 4 4 4 4

S7-1500

4 4 4 4 4 4 4 4 4 4 4 4 4

S7-400

4 4 4 4 4 4 4 4 4 4 4 4 4 4

S7-400F

4 4 4 4 4 4 4 4 4 4 4 4 4 4

S7-400FH

Siemens AG 2013


10/16

Selection assistant for RTUs based on embedded controllers10

Selection assistant for RTUs based onembedded controllers

The table shows which RTUs based on embedded controllers

can be selected via different fieldbus, protocol and featurecriteria.

Embedded controllers as RTU offer more flexibilty in case ofuser applications (like AGA, long-term archiving, file transferapplication).

1)via ET 200M/ET 200iSP

RTU

Hard-

wired

I/O

Fieldbus Communication protocols

Powersupplyredundancy

AI,AO,DI,DO

HART

FOUNDATIONFieldbus

PROFIBUSDP/PA

PROFInet

Connectionofauxiliary

systemswithModbus

LocalHMI

IP-T(IP-Telemetry)

SINAUTST7(serialorTCP/IP)

DNP3(serialorTCP/IP)

ModbusRTUserial

ModbusRTUTCP/IP

IEC60870-5-101serial

IEC60870-5-103

protectionrelay

IEC60870-5-104TCP/IP

IEC61850

Nanobox 4 4

1) 4 4 4 4 4 4 4 4 4

Microbox

4 41)

4 4 4 4 4 4 4 4 4

S7-mEC

4 41)

4 4 4 4 4 4 4 4 4

Box PCs

4 41) 4 4 4 4 4 4 4 4 4

Panel PCs

4 41)

4 4 4 4 4 4 4 4 4

Siemens AG 2013


11/16

Selection assistant for RTUs based on embedded controllers 11

Selection assistant for RTUs based onembedded controllers

Private networks Public networks Extreme

environmental

condition

RTURadio

Dedicatedline

WLAN

GPRS

EGPRS

UMTS

DSL

AmericanGasAssociation(AGA)

IndustryLibrary(IL)

Logicaluserapplications

Failsafe

IEC61850-8MMS(Manufac-

toringMessageSpecification)

Aggressiveenvironmental

Condensation/icing

4 4 4 4 4 4 4 4 4 4 4 4

Nanobox

4 4 4 4 4 4 4 4 4 4 4 4

Microbox

4 4 4 4 4 4 4 4 4 4 4 4

S7-mEC

4 4 4 4 4 4 4 4 4 4 4 4

Box PC

4 4 4 4 4 4 4 4 4 4 4 4

Panel PC

Siemens AG 2013


12/16

Telecontrol protocols12

Telecontrol protocols

General/elementary telecontrol functions

Telecontrol systems use special protocols to implement datatransmission between the control center and the outstations(RTUs) at the process level for the automation functions onsite. These telecontrol protocols manage the secure and errorfree data transmission over the WAN even with a low band-width and poor transmission quality. In addition to shorttransmission times for the information, this task requireseffective protection of the frames against:

Undetected bit errors Undetected frame errors resulting from

synchronization errors

Undetected loss of information Frame falsification Segregation or fault in related information

This particularly applies to event-controlled frames over trans-mission channels with a limited bandwidth and uncertainnoise response. Since irregular bit sequences are compiled fordata transmission, no limitation in codes must exist.

Time stamp

When linking RTUs by means of SINAUT ST7, DNP3,IEC 60870-5-101 or IEC 60870-5-104 telecontrol protocol,

the raw data in the outstations is provided with a time stampand transmitted to the SIMATIC WinCC/PCS 7 TeleControl OS(server/single station) acting as control center. Adaptation,further processing, and archiving are carried out here. Thisprocedure is appropriate for the event-based principle ofoperation of the telecontrol protocol as well as the sub-sequent chronological processing of data previouslybuffered in the outstation.

Clock synchronization

The WinCC/PCS 7 TeleControl OS are the clock mastersfor the RTUs connected by means of SINAUT ST7, DNP3,

IEC 60870-5-101, IEC 60870-5-103 or IEC 60870-5-104, andregularly synchronizes their date and time via the telecontrolconnection. Switching over between summertime and winter-time is also considered during the synchronization.

Failsafe

For safety applications Siemens has a full range of safetyproducts. Siemens also offers Safety consultancy servicesand Safety trainings based on the products and standards.The trainings based on the standards IEC 61508/11 are incooperation with TV.

Data buffering

The SINAUT ST7, DNP3, IEC 60870-5-101 and IEC 60870-5-104telecontrol protocols support reliable on-site intermediatebuffering of the data including time tag, e.g. if a communica-tion path is faulty or a station has failed. In addition, inter-

mediate buffering of data can also be an effective meansfor reducing connection costs in the dial-up network. A dataupdate for all participating communication partners is per-formed automatically following debugging or restarting of thefailed station. Important events are not lost, and the integrityof the control center archive is assured.

American Gas Association (AGA)

The AGA library for calculation of the flow of natural gas isbased on API 21 and contains function blocks and faceplatesand is certified for non custody transfer.

Industry Library (IL)

The Industry Library provides an efficient support for graphi-cal engineering with SIMATIC PCS 7 connected RTUs viaSINAUT ST7. More than 100 tested blocks, including industry-specific faceplates for pumps, valves, controls etc minimizesthe commissioning and training overheads in different indus-tries.

Siemens AG 2013


13/16

SCADA connectivity 13

SCADA connectivity

SCADA systems connect outstations via several protocols.The table shows which protocols are supported bySCADA control centers.

Connectivity Communication protocols

IP-T(IP-Telemetry)

SINAU

T

DNP3

Modb

us

IEC60

870-101

IEC60

870-103

IEC60

870-104

IEC61

850

Modb

usPlus/SSI

PCS 7 TeleControl 4 4 4 4 4

PCS 7 PowerControl 4

WinCC TeleControl 4 4 4 4

WinCC ST7cc 4

WinCC OA 4 4 4 4 4 4

SCADA with ST7sc 4

SCADA with TeleControl Server Basic 4

Third-party SCADA 4 4 4 4 4 4 4

Siemens AG 2013


14/16

Integration of switchgear automation14

Integration of switchgear automation

Automation levels in power supply and distribution

Besides typical RTUs in field automation, also substation auto-mation can be integrated in SIMATIC PCS 7. Historically, sys-tems for automating a process and systems for automatingthe power supply to this process were always strictly segre-gated. With SIMATIC PCS 7 PowerControl, it is now possible tocombine process automation and the automation of electricalswitchgears for medium voltages ranging from 4 to 30 kV inone control system. This results in a host of benefits that pro-vide huge cost savings over the entire life cycle of the plant, bymeans, for example, of:

Simpler plant structures with more transparency in thetechnological dependencies

Further increase in the level of integration of the plant Uniform process control and further expansion of the

operator's task area Long-term investment security thanks to globally valid

standard IEC 61850 Rational, integrated engineering and fast commissioning Lower administration, service and training costs thanks to

uniform holistic view Effective energy management (load management, con-

sumption optimization)

These are gaining even more in importance given the increas-ing decentralization resulting from greater use of renewableenergies. One example of this is provided by wind farms.

An electrical switchgear distributes or transforms electricalenergy, bundling loads/consumers into load groups. With thehelp of switching devices, network nodes implemented asbusbars connect incoming and outgoing cables known asfeeders. When the substation is dimensioned, account is takenof changes to the network topology in the event of faults, andthe isolation and grounding of equipment for maintenancework.

Integration of intelligent electronic devices intoSIMATIC PCS 7

Electronic devices (IEDs) such as SIPROTEC protective devicesor interoperable third-party devices are used for automatingswitchgears, that is, for protection, control, measuring andmonitoring functions in electrical energy transmission anddistribution. IEDs can be integrated into the SIMATIC PCS 7process control system via Ethernet TCP/IP communicationwith the IEC 61850 transmission protocol for protection andcontrol technology in electrical switchgears.

G_

PCS7_

XX_

00318

High-voltage level Overhead line Overhead line

Section 1 Section 2

To loads

Typical loads

Large drives

Heavy-duty fans

Compressors, pumps

Large centrifuges

Extruders, mixers

Crushers, mills

Electrolysis, electroplating

Building infeed

Substation automation with

IEC 61850

Controlling, switching

Measuring and automating

important loads

- Generators

- Transformers

- Motors

HV: 60 ... 145 kV

MV: 4 ... 30 kV

LV: 0.4 ... 1 kV

LV-MV

inverters

LVD/MCC

compensation

LV motors/MV motors

Medium-voltage

main stations

Medium-voltage

substations

Process

SIMATIC PCS 7 PowerControl

Siemens AG 2013


15/16

Service, Training 15

Service, Training

Siemens Industry service portfolio

Increasing demands make it ever more important that indus-trial plants operate at highest productivity and efficiencylevels. Industry Services from Siemens provide industry busi-nesses with the vital competitive edge.

Whether its production or process industry - in view of risingcost pressure, growing energy costs, and increasingly strin-gent environmental regulations, services for industry are acrucial competitive factor in manufacturing as well as in pro-cess industries. All over the world Siemens supports its cus-tomers with product, system, and application-related servicesthroughout the entire life cycle of a plant. Right from the ear-

liest stages of planning, engineering, and building all the wayto operation and modernization, these services enable cus-tomers to benefit from the Siemens experts unique techno-logical and product knowledge and industry expertise. Thusdowntimes are reduced and the utilization of resources is opti-mized. The bottom line: increased plant productivity, flexi-bility, and efficiency, plus reduced overall costs.

SITRAIN Training for Industry

Getting directly applicable know-how fast

practical training courses from the manufacturer!

From the basics and advanced to specialist skills, SITRAINcourses from the Siemens training program deliver extensiveexpertise directly from the manufacturer and encompassthe entire spectrum of Siemens Industry products and sys-tems. Worldwide, SITRAIN courses are available wherever youneed a training course in over 200 locations in 62 countries.

Training Topics Worldwide

SITRAIN training offer for automation and industrialsolutions are available worldwide and provide extensive

expertise directly from the manufacturer. You can takeSiemens courses in a traditional classroom environment orexpand your knowledge using innovative learning and com-munications media such web-based training. And, if you arelooking for training on a specific product and want to knowwhere the course is offered, just look through our overview ofcourses available worldwide.

Get more information in the internetsupport.automation.siemens.com

www.siemens.com/sitrain

Siemens AG 2013


16/16

Get more information

For further information regarding RTUs from Siemens Industryplease have a look atwww.siemens.com/rtu

or contact us [email protected]

The information provided in this brochure contains descriptions or

characteristics of performance which in case of actual use do not

always apply as described or which may change as a result of further

development of the products. The desired features are only binding if

explicitly agreed in the contract. Availability and technical

specifications are subject to change without notice.

Any product names mentioned may be trademarks or product

designations of Siemens AG or their suppliers, whose use by third

parties for their own purposes may infringe the rights of the trademark

owners.

Siemens AGIndustry SectorIndustrial Automation SystemsP.O. Box 48 4890026 NRNBERGGERMANY

Subject to change without prior noticeOrder No.: E86060-A4678-A291-A3-7600MP.R4.AS.SICB.03.3.01 / Dispo 09508BR 0313 2. PES 16 EnPrinted in Germany Siemens AG 2013

www siemens com/automation

Siemens AG 2013

Siemens RTU Units

Documents

Transcript of Siemens RTU Units