Siemens Corporate Design...
Transcript of Siemens Corporate Design...
Package DesignSmart Innovation for a Competitive Edge
Realize InnovationRestricted © Siemens AG 2016
Restricted © Siemens AG 201607.26.2016Page 3 Siemens PLM Software
A connected processJyothy Laboratories
Reduced product development time by more than 50 percent
Achieved a 50 percent cost savings in design
Improved productivity by 35 percent
Improved quality and reduced errors by 75 percent
“There’s no question that the integrated solutions of NX CAD, NX Mold Design and NX CAM helped us realize faster time-to-market, gain a larger market share and produce better-quality products.”
G. Viswanathan Assistant Manager, CAD/CAM Jyothy Laboratories
Restricted © Siemens AG 201607.26.2016Page 4 Siemens PLM Software
“Idea to shelf” workflowLinking the entire process
Concept Development
Detail Design
Secondary Packaging Validation Tooling Process
ValidationVirtual Store
/ Shelf Design
Restricted © Siemens AG 201607.26.2016Page 5 Siemens PLM Software
“Idea to shelf” workflowLinking the entire process
Concept Development
Detail Design
Secondary Packaging Validation Tooling Process
ValidationVirtual Store
/ Shelf Design
Restricted © Siemens AG 201607.26.2016Page 7 Siemens PLM Software
3D Concepts
Raster Import allows creation of base design data from artwork
Fully integrated suite of tools forprimary package development
No data conversion saves timeand improves quality
Restricted © Siemens AG 201607.26.2016Page 8 Siemens PLM Software
3D Concepts
Single suite of tools to enable rapid development of 3D Concepts from initial concept to detail package
No data translation = no rework and noloss of control
Restricted © Siemens AG 201607.26.2016Page 9 Siemens PLM Software
3D Concepts
Material Fill
Quickly understand fill levels and adapt shapes to meet package demands
Restricted © Siemens AG 201607.26.2016Page 10 Siemens PLM Software
Generate and visualize label regions
Die line generation
Visualize label & decals from artwork management solutions
Label Design, Integration & Validation
Restricted © Siemens AG 201607.26.2016Page 11 Siemens PLM Software
Share and reuse knowledge
Re-use standard geometry & components for closures
Capture and share standard configurations
Templates and standardization
Restricted © Siemens AG 201607.26.2016Page 12 Siemens PLM Software
“Idea to shelf” workflowLinking the entire process
Concept Development
Detail Design
Secondary Packaging Validation Tooling Process
ValidationVirtual Store
/ Shelf Design
Restricted © Siemens AG 201607.26.2016Page 13 Siemens PLM Software
Secondary Packaging Design
Link secondary package to primary packages
• Associative flattening of card based secondary packages
• Complex plastic packaging
• Integrate Decaling and Rendering
Restricted © Siemens AG 201607.26.2016Page 17 Siemens PLM Software
Managing Change
Change is inevitable
• Fully associate change throughout the whole process
Restricted © Siemens AG 201607.26.2016Page 18 Siemens PLM Software
“Idea to shelf” workflowLinking the entire process
Concept Development
Detail Design
Secondary Packaging Validation Tooling Process
ValidationVirtual Store
/ Shelf Design
Restricted © Siemens AG 2015 2016-07-26Page 19 Siemens PLM Software
Production Design, Simulation & Validation
Restricted © Siemens AG 201607.26.2016Page 20 Siemens PLM Software
Integrating Tooling Development
Full associativity between product and mold models allows rapid response to primary package change
• Reuse tooling knowledge and best practice
• Complete suite of analysis tools to predictmanufacturing performance
Restricted © Siemens AG 201607.26.2016Page 21 Siemens PLM Software
Confidence in design
Reuse design data through product validation, reducing cost and risk by validating against product requirements
• Design Idealization
• Structural Analysis - Crush
• Computational Fluid Dynamics
Restricted © Siemens AG 201607.26.2016Page 22 Siemens PLM Software
Confidence in DesignIntegrated through to machine design
Operations
Motion Control
Drives & Actuators
Mechanical
Sensors
Restricted © Siemens AG 201607.26.2016Page 23 Siemens PLM Software
“Idea to shelf” workflowLinking the entire process
Concept Development
Detail Design
Secondary Packaging Validation Tooling Process
ValidationVirtual Store
/ Shelf Design
Restricted © Siemens AG 201607.26.2016Page 24 Siemens PLM Software
NX from Packaging to Point of SaleKesslers International
Design changes per mold from 2.2 to 0.7 Sample parts delivered 30 minutes after design Substantial re-keying and related errors eliminated Substantially improved results in terms of time, cost and quality Repeat business; new customers
“We know it works because we measure success through order increases and complaint reductions. We have a very, very low level of complaints. We have a good level of customer satisfaction and our customers keep coming back. And we have important new customers. That is the best proof we can have.”
George Kessler CBEGroup Director
Kesslers International