FROM 70 TO 200CM 6 COLOUR OPTIONS ANTIBACTERIAL SURFACE STONE-EFFECT FINISH

S H O W E R T R A Y S A N D W A L L P A N E L S

Solid material with highly resistant antibacterial surface featuring riven stone effect finish

90mm multidirectional shower waste with hair trap and Stainless steel grid included

Cut panels and trays to exactdimensions required on site

Matching wall cladding panels in 4 widths

Basins and worktops available in matching colour and material

Sit on or inset installation

Easy seal where wall panels sit above shower tray

Quick & Simple installationNo Replastering required

BATH REPLACEMENT SIMPLICITY

ULTRA-RESISTANT ANTIBACTERIAL GELCOAT AND NATURAL STONE EFFECT RIVEN SURFACE

Wall panels can be easily trimmed to your exact dimensions and angles on site. They can be glued to any type of dry wall without any re-plastering using polyurethane mastic, hybrid mastic or silicone sealant.

MADE TO MEASURE ADJUSTMENT

SHOWER TRAY INSTALLATION WALL PANELS INSTALLATION

Altima shower trays and wall panels may be ordered factory cut to pre-defined dimensions or cut on site to the exact measurements required using a continual diamond edge disk cutter.

Altima shower trays have a flat base so they can be installed directly onto the existing floor.

Thanks to their low height (3cm), Altima shower trays can be fitted onto flooring joists and inset into the floor for a wetroom look.

Sit on Inset

Please note than any cut over 5cm from each edge may encroach into gradient showering area.

S H O W E R T R A Y S A N D W A L L P A N E L S

THE SAME MATERIAL FOR THE WHOLE SHOWER : SMO™

This versatile hardwearing material which has been designed and manufactured by Ambiance bain for over 20 years is a mixture of polyester and natural stone powders. It is cast into matching contemporary shower trays, wall panels and even one piece moulded basins and worktops within our own factories.

The finished surfaces are created by spraying a layer of antibacterial gelcoat 1000 microns thick into a natural riven stone effect design. This makes the finished product 30 times more resistant to scratches or dents and more waterproof than our competitors sanitary paint finishes.

• Antibacterial: Specialist coating prevents all bacteria growth on surface (exceeding standard JIS Z2801)• High Durability: An anti UV treatment gives high resistance to aging, high colour stability and makes the products fade resistant (complying with standards NF438-2 and EN14527)• High resistance to chemical products: bleach, limescale remover, drain cleaner, white vinegar… (complying with standard EN14527)• High resistance to scratches and dents: Impact resistant from everyday objects and abrasives (exceeding standards XPD60-050 and XPD12-210)• Waterproof: 100% non porous, mould resistant, moulded in one piece, no grout lines or joints requiring maintenance• Acoustic Quality: Solid material with very low noise resonance• Fire resistance: Standard M2 (exceeding regulations NPF 92-501/3/4 & 5)

Ab stainless steel grid and 90mm multi-directional waste, with hair trap basket, are supplied with every tray.

WASTE

ANTI-SLIP SURFACEAll ALTIMA shower trays comply with anti-slip regulation XP P05-010 thanks to it’s riven stone effect design.A higher NON-SLIP commercial type classification PN12 can be achieved by adding an optional extra NON-SLIP coating during manufacture.

SIMPLE INSTALLATIONAltima shower trays can be ordered standard sizes, factory cut to specific dimensions or may be cut to required size on site. Wall panels can be glued onto most dry wall surfaces without any need for replastering using polyurethane mastic, hybrid mastic or silicone.

45 cm*

"

200WHITE GLOSS

214SILVER GALAXY

GLOSS

245GREIGE

SATIN

246GREIGEGLOSS

267NOUGAT

SATIN

205VOLCANIC

SATIN

"

"

* waste centre 45cm except 80 × 180 tray = 65cm.

70 > 120 cm

70 > 200 cm

70 > 100 cm

3 cm

0.6 cm thick

45 cm*

ALTIMA SHOWERS AMBIANCE BAINTEL: 01925 852675sales@ambiancebain.com

www.ambiancebain.co.uk

TECHNICAL SPECIFICATIONS

160 cm

Gradient on 160 cm

maximumDrying area above

160 cm

Adjustable waste (vertical or horizontal outlet) with hair trap basket

Stainless steel grid

8,5 cm

1,5 cm

11,2

cm

11,2 cm

3 cm

11,8 cm

11,8 cm

12,3 cm

COLOURS

SMO™ 200 SMO™ 267 SMO™ 205 SMO™ 214 SMO™ 245 SMO™ 246

SIZE REFERENCE PRICE £ (INC. VAT)

WHITE GLOSS

NOUGAT SATIN

VOLCANIC SATIN

SILVER GALAXY GLOSS

GREIGESATIN

GREIGEGLOSS

90 × 90 cm Tray ZBDEC9090 £399 • •90 × 120 cm Tray ZBDEC90120 £599 • • • • • •90 × 140 cm Tray ZBDEC90140 £699 • • • • • •90 × 160 cm Tray ZBDEC90160 £799 • • • • • •90 × 180 cm Tray ZBDEC90180 £899 • • • • • •90 × 200 cm Tray ZBDEC90200 £949 • •80 × 120 cm Tray ZBDEC80120 £449 • •80 × 180 cm Tray ZBDEC80180 £779

100 × 120 cm Tray ZBDEC100120 £649

100 × 140 cm Tray ZBDEC100140 £749

ALTIMA shower trays are available in 3 standard widths and up to 6 standard lengths, but may be cut to exact dimensions required when ordering or on site. Please note than any cut over 5cm from each edge may encroach into gradient showering area. For factory cut options a precise drawing of which sides to be cut and waste position must be supplied with order.

SHOWER TRAYS

COLOURS

SMO™ 200 SMO™ 267 SMO™ 205 SMO™ 214 SMO™ 245 SMO™ 246

SIZE REFERENCE PRICE £ (INC. VAT)

WHITE GLOSS

NOUGAT SATIN

VOLCANIC SATIN

SILVER GALAXY GLOSS

GREIGESATIN

GREIGEGLOSS

90 × 210 cm Wall panel ZPDEC21090 £499

120 × 210 cm Wall panel ZPDEC210120 £599

90 × 240 cm Wall panel ZPDEC24090 £549

120 × 240 cm Wall panel ZPDEC240120 £699

Matching shower wall panels are available in 2 standard heights and widths, but may be easily cut to exact dimensions required on site.

WALL PANELS

• Stock items delivered within 1-2 weeks Manufactured to order within 3-4 weeks

Trays over 160cm will feature a flat drying area at the opposite end to the waste

* waste centre 45cm except 80 × 180 tray = 65cmAll prices are RRP including VAT.

210

> 2

40 c

m