Styles Quality Finishes

S H O W E R D R A I N S

21652_OAT_Drain_Brochure_REV 8/18/05 9:30 AM Page 3

A SOLUTION FOR EVERY SHOWER DRAIN APPLICATION

130 Series Shower Drains for Tile Shower BasesOatey Shower Drains for Tile Shower Bases are designed for use withtile or marble showers where a shower pan liner is used. The lowprofile design allow for installation in tight spaces. The drain bodysolvent welds over 2" or inside 3" Schedule 40 DWV pipe. Reversibleclamping collar is secured with 4 stainless steel bolts into brassinserts. The 2" IPS threaded strainer barrel is adjustable to allow for easy height adjustment. Weep holes in the drain assembly allowdrainage from the pan liner. Drain barrel accommodates 41⁄4" UniversalSnap-Tite Strainers available in a variety of designer finishes.

42210 ABS Round Stainless Steel42213 PVC Screw-Tite Strainer

42399 ABS Round UltraShine® PVD Polished Brass Strainer42404 PVC Screw-Tite Strainer

42203 ABS Round Stainless Steel42202 PVC Snap-Tite Strainer

42238 ABS Square Stainless Steel42237 PVC Snap-Tite Strainer

42218 ABS Round Stainless Steel Screw-Tite Strainer 42219 PVC With A Chrome Plated Brass Barrel

42225 Roman Tub Drain Top – Chrome

131 Series Two Part Adjustable Slab DrainsOatey Two Part Adjustable Slab Drains are designed for on-gradetile shower installations where the use of shower pan liner is notrequired. Threaded barrel is adjustable to meet the height of the finished floor. Drain base is engineered to solvent weld over 2" or inside 3" Schedule 40 DWV pipe. Drain barrel accommodates 41⁄4" Universal Snap-Tite Strainers available in a variety of designer finishes.

42236 ABS Round Stainless Steel42235 PVC Screw-Tite Strainer

42389 ABS Square Stainless Steel42388 PVC Snap-Tite Strainer

Brass NickelRound Cast Grate ABS 42381 42385Round Ring PVC 42380 42384Round Cast Grate ABS 42383 42387Square Ring PVC 42382 42386

21652_OAT_Drain_Brochure_REV 8/18/05 9:31 AM Page 4

1

Oatey NO-CALK Drain Caulking Gaskets are designed for use with NO-CALK Shower Drains and allow the installer to accommodate alternate pipe materials or sizes. Gaskets are available in 11⁄2" or 2" size for Schedule 40 DWV or Copper DWV piping.

42163 11⁄2" Schedule 40 / Cast Iron Gasket42156 2" Schedule 40 / Cast Iron Gasket42159 11⁄2" Copper Gasket42158 2" Copper Gasket

101 PNC Series Plastic NO-CALK Shower Drains

140 Series Brass NO-CALK Shower Drains

Oatey NO-CALK Shower Drains are designed for use with preformed shower stall bases. The drain body is sealed to the shower base with a rubber gasket and fiber slip washer. 2" Schedule40 DWV pipe is secured with a mechanically compressed gasket thatdoes not require caulking. Drain top accommodates 41⁄4" UniversalSnap-Tite Strainers available in a variety of designer finishes.

42150 Stainless Steel Snap-Tite Strainer42154 UltraShine® PVD Polished Brass Snap-Tite Strainer

42084 ABS Stainless Steel42099 PVC Snap-Tite Strainer

42077 ABS White Plastic 42075 PVC Snap-Tite Strainer

42080 PVC UltraShine® PVD Polished Brass Snap-Tite Strainer

NO-CALK Drain Wrench

NO-CALK Drain Caulking Gaskets

Oatey NO-CALK Drain Wrench is designed for use with 140 & 101 PNC NO-CALK Series and 102 Series Receptor Base Shower Drains.The Wrench is used to compress the caulking gasket in the NO-CALKShower Drain and is used for tightening the top section of the ReceptorBase Shower Drain to the bottom base.

42239 NO-CALK Shower Drain Wrench – Carded

1

NO-CALK SHOWER DRAINS

21652_OAT_Drain_Brochure_REV 8/18/05 9:32 AM Page 5

SHOWER DRAINS

102 Series Solvent Weld Shower Drains with Receptor Base

103 Series Offset Shower Drains with Receptor Base

s

Oatey Solvent Weld Shower Drains are designed for use with preformed shower stall bases. The drain body is sealed to the showerbase with a rubber gasket and fiber slip washer. 2" Schedule 40 DWVpipe solvent welds to the drain base. Drain top accommodates 41⁄4"Universal Snap-Tite Strainers available in a variety of designer finishes.

42093 ABS Stainless Steel 42097 PVC Snap-Tite Strainer

42086 ABS White Plastic42089 PVC Snap-Tite Strainer

42078 PVC UltraShine® PVD Polished BrassSnap-Tite Strainer

42044 ABS Stainless Steel42045 PVC Snap-Tite Strainer

42048 ABS White Plastic42049 PVC Snap-Tite Strainer

42047 PVC UltraShine® PVD Polished BrassSnap-Tite Strainer

Oatey Offset Shower Drains with Receptor Base are designed for use with preformed shower stall bases. The drain is solvent welded to 2" Schedule 40 pipe. The drain body provides 11⁄2" offset to work around joists and imperfect slab penetrations. Drain top accommodates 41⁄4" Universal Snap-Tite Strainers available in a variety of designer finishes.

42788 ABS Stainless Steel42787 PVC Snap-Tite Strainer

101 PS Series Solvent Weld Shower Drains

MagenDOES

Oatey Solvent Weld Shower Drains with Receptor Base are designedfor use with preformed shower stall bases. The receptor base integrates the body locknut allowing easier installation of the drainbody to the shower base. 2" Schedule 40 DWV pipe solvent welds tothe receptor base. Drain top accommodates 41⁄4" Universal Snap-TiteStrainers available in a variety of designer finishes.

21652_OAT_Drain_Brochure_REV 8/18/05 9:32 AM Page 6

129 Series Universal 41⁄4" Snap-Tite Designer Finish Strainers

2" NPT Connection11⁄2" NPT Connection 2" Caulking Connection

42005 Stainless Steel – Carded42004 UltraShine® PVD Polished Brass – Carded42014 UltraShine® PVD Satin Nickel – Carded42015 UltraShine® PVD Satin Chrome – Carded42016 Biscuit – Carded42017 Rubbed Bronze – Carded42018 Brushed Nickel – Carded42019 White – Carded42020 Antique Bronze – Carded

All strainers are engineered using stainless steel base metal.

Stainless Steel UltraShine® PVD Polished Brass

UltraShine® PVD Satin Nickel

UltraShine® PVD Satin Chrome

Biscuit Rubbed Bronze Brushed Nickel White

Oatey 101 Brass NPT and Caulking drains are designed for use with preformed shower stall bases. The drain body is sealed to the shower base with a rubber gasket and fiber slip washer. ThreeDWV connection methods provide a drain for all applications ofmetallic pipe. Drain top accommodates 41⁄4" Universal Snap-TiteStrainers available in a variety of designer finishes.

42073 Stainless Steel Strainer – 2" NPT Connection42070 Stainless Steel Strainer – 11⁄2" NPT Connection42050 Stainless Steel Strainer – 2" Caulking Connection

101 Series Brass NPT And Caulking Drains

Antique Bronze

Oatey Universal 41⁄4" Snap-Tite DesignerFinish Strainers are designed to provide adecorative finish to shower drains.Available in a variety of popular finishes,these strainers will coordinate with mostpopular faucet finishes to complement anyglamour bathroom suite.

21652_OAT_Drain_Brochure_REV 8/18/05 9:29 AM Page 1

151 Series Cast Iron & Plastic Two Part Shower Drains

4700 W. 160th St.Cleveland, Ohio 44135Ph: (800) 321-9532Fax: (800) 321-9535www.oatey.com

Accessories

Square Tile Ring

Roman Tub Drain Top

Crown Ring Set

LCS 363 Rev. 8.10.05

NO-HUB

NO-CALK

11⁄2" NPT

2" NPT

ABS Base Includes Test Cap

Oatey 151 Drain Accessories include Crown Ring Set, Roman Tub Drain and 2 sizes of Square Tile Rings.

42011 31⁄4" Crown Ring Set Stainless Steel – Carded42010 31⁄4" Crown Ring Set UltraShine® PVD Polished Brass – Carded42041 41⁄4" x 41⁄4" Square Tile Ring UltraShine® PVD Polished Brass – Carded42042 41⁄4" x 41⁄4" Square Tile Ring Stainless Steel – Carded42012 6" x 6" Square Tile Ring Stainless Steel – Carded42220 Roman Tub Drain Top – Chrome

Oatey Cast Iron and Plastic Two Part Shower Drains are designed for use with tile or marble shower bases where a hot mop membrane is required. The low profile design allows for installation in tight spaces. Drains include a 31⁄4" Crown Ring Set. Options include cast iron or plastic variations with Threaded, NO-CALK or Solvent Weld connections.

42211 ABS Drain – 2" Solvent Weld Connection42215 Cast Iron Top With ABS Base – 2" Solvent Weld Connection42197 Cast Iron Drain – 2" NPT Connection42192 Cast Iron Drain – 11⁄2" NPT Connection42201 Cast Iron Drain – 2" Schedule 40 NO-CALK Connection42206 Cast Iron Drain – 2" No Hub Connection

21652_OAT_Drain_Brochure_REV 8/18/05 9:29 AM Page 2