Ship Loader - NEUEROneuero.de/wp-content/uploads/2014/07/263_Ship_Loader.pdf · After the transfer...
Transcript of Ship Loader - NEUEROneuero.de/wp-content/uploads/2014/07/263_Ship_Loader.pdf · After the transfer...
Ship Loader
www.neuero.de
Ship Loader on raiLS
detaiLS
SpeciaL FeatureS
KiK
o (K
icK
in K
icK
ou
t)
co
ve
r B
eLt
du
St
Su
pp
re
SS
iom
he
ad
Loading capacity up to 3.000 tph or even higher
MV or LV power supply via electric cable drum
Loading of ship sizes from barges up to Post-Panamax or Capsize
Simple operation in automatic mode
Low dust and noise emissions
Easy access and maintenance friendly design
NEUERO Suppression Head for low dust operation
Suitable for loading of all kinds of grains and meals from the food industry
but also dry bulk like fertilizers, sugar, alumina, pet coke, etc. These ship
loaders are usually customized and adapted to the local surroundings.
Ship loading of all types of inland or ocean-going vessels via a jetty belt
conveyor which is located usually parallel to the quay and which is sup-
plying the bulk material to the ship loader. This happens almost “dust
free” due to the use of closed conveyors and aspiration systems.
After the transfer of the bulk to the ship loader via an on-board interme-
diate conveyor, such as an elevator, belt conveyor or chain conveyor, the
bulk material is transported through the boom conveyor to the loading
pipe and the NEUERO suppression head or sometimes loading bellow.
Especially by using a telescopic loading pipe with a special NEUERO
type of suppression head, all ship hatches are covered during dust-free
loading operation.
NEUERO Ship loaders have, depending on the geometry, bulk discharge
capacities of up to 3.000 tph. Powered directly by either low voltage
or medium voltage while on-board transformers provide corresponding
voltages.
Kick in/Kick out up to +/- 45°
Plus vertical telescopic loading pipe
Plus boom swivelling and luffing
Full coverage of the hatches
Low product speed means less dust
and less breakage
Automatic material flow control
Controlled material discharge
Low product speed
Less dust
Automatic material flow control
Large coverage area of the hatch
Tripper car drawn by the ship loader
Gallery housing not required
Wind and rainproof
Less weight for supporting steel structure
Less investment in foundations
3.000 tph for Grain / Global Grain Brazil
3.000 tph for Sugar / Cargill Brazil
www.neuero.de
2 x 800 tph for Grain / Novorossiysk Russia
6 x 1.000 tph for Grain / Taman Russia
4 x 600 tph for Grain / Nibulon Ukraine
Stationary Ship LoaderS
Adapted to existing buildings or stand-alone steel structures
Loading capacity up to 3.000 tph
Loading of ship sizes from barges up to Post-Panamax or Capsize
Simple operation in automatic mode
Low dust and noise emissions
Easy access and maintenance friendly design
NEUERO suppression head for low dust operation
detaiLS
Feed Mills or Silo terminals, whose facilities are located at the domestic
waterways, operate usually with stationary systems. This requires effecti-
ve operation to keep ship demurrage costs low. In addition, their location
is often close to cities or nearby residential areas, requiring specific limi-
tations regarding noise and dust emissions. In contrast to ship unloading
operation of river barges, the capacities for loading of river barges are
already much higher. At bigger silo terminals loading rates can exceed
500 tph easily.
Neuero uses various mechanical conveying systems suitable for the in-
frastructure and adapted to the dry bulk product, which must be con-
veyed as carefully as possible to avoid breakage and abrasion. Our main
goals are best environmental conditions at maximum capacity.
One example is the NEUERO suppression head developed for ship loa-
ding pipes. Thus, we achieve a nearly dust-free loading operation with
controlled material flow at a very low speed.
300 tph for Fish Pellets / Trondheim Norway
“SHIP LOADING SOLUTIONS” – THE EXPERTISE OF NEUERO
SHIP LOADERS for port and terminal operators at high capacity and
under best environmentally conditions is the know-how of Neuero In-
dustrietechnik GmbH. With decades of experience in handling of bulk
materials, designed by the expertise of its engineers, Neuero offers its
customers turnkey and if necessary individual and special solutions. After
commissioning, we support our clients with service and maintenance as
well as training programs. Health, safety and environmental responsibility
is important to us! Our daily work takes into account the specification
and instructions of the ISO 9001 and OHSAS 18001. Based on our ex-
perience and expertise in material handling Neuero is a worldwide leader
when it comes to ship unloading and ship loading solutions.
800 tph for Grain / Nikolajev Ukraine
6 x 1.000 tph for Grain / Taman Russia
production
www.neuero.de
Our Coating division approved by major international paint producers and received all the necessary qualifications and equipment to carry out
paint works as per German and International standards. We use highly skilled staff for surface preparation, coating application, inspection and
HSE with years of experience in the coating field. Our facilities include dedicated closed shed shops for sand blasting and a highly efficient elec-
trostatic paint shop. It is equipped with recycling equipment and recuperator (counter-flow energy recovery heat exchanger) for recovering the
waste heat and to save energy.
pain
t S
ho
p &
Sa
nd
BLa
St
inG
Sh
ed
Spa
re
pa
rt
S w
ar
eh
ou
Se
For just in time delivery
Stock keeping of wear parts
Warehousing of all key components
NEUERO has its own 6.550 m2 manufacturing facility and a new logistical
area, which was, added beginning of 2013 at our headquarters in Melle,
Germany. We are equipped with our own machining shop, pre-assembly
yard, sand blasting shed, paint shop and test facility for motors and turbo
blowers. The regular use of laser cutting for steel plates up to 20 mm
allows us precise fabrication of our components with best tolerances.
Pre-assembly of all key-components with in-house testing before delive-
ry is part of our capabilities.
Production area for conveying pipelines.
Horizontal telescopic winch.
Pre-assembly area for the machinery house containing the NEUERO
TURBO BLOWER and the electrical control system of the MULTIPORT.
Final assembly of two MULTIPORT unloading booms with the conveying
pipelines and winches.
Workstation for NEUERO TURBO BLOWERS.
NEUERO designs and produces its own type of winches.
Neuero Industrietechnik für Förderanlagen GmbH
Neuerostraße 149324 MelleGermany
Fon: +49 (0)5422 / 95 03 -0Fax: +49 (0)5422 / 95 03 -50
E-Mail: [email protected]: www.neuero.de
263 Ship Loader
neuero induStrietechniK GmBh
NEUERO INDUSTRIETECHNIK FÜR FÖR-
DERANLAGEN GMBH with it’s headquarters
in Melle - Germany, operates globally and of-
fers turnkey solutions in the field of „bulk solids
handling“.
Neuero follows the „MADE IN GERMANY“ tra-
dition and provides high quality, environmen-
tally friendly and durable loading and unloading
equipment for industrial plants, silo terminals,
power plants, aluminum smelters, malting
plants, feed mills, etc.
Multiport - pneumatic ship unloader
(mobile or stationary) up to 1,200 t/h
Ship loader (mobile or stationary)
up to 3,000 t/h
Combiport - (combined loading
and unloading)
Flexiport - ship unloader for
non-free flowing products
Mobile pneumatic suction unit