gaf.com

Updated: 2/16

Shingle-Mate®

Sell Sheet (RESUL127)

Excellent-Quality Roof Deck Protection Can Protect And Beautify At The Same Time!

Avoid A Buckled,Bumpy-Looking Roof With Excellent

Roof Deck Protection

Roof Deck Protection

Quality roof deck protection (often referred to as “tar paper” or “felt”) provides an extra layer of protection between your shingles and your roof deck. It helps prevent wind-driven rain (or water from other sources) from infiltrating under your shingles and causing damage to your roof structure or the inside of your home. It will also:

• Lie flatter than conventional organic felt and reduce“telegraphing” wrinkles

• Help shingles to lie flat and uniform• Result in a better-looking roofing job

Shingle-Mate® Roof Deck Protection is a key part of the GAF Lifetime Roofing System*, and has even earned the prestigious Good Housekeeping Seal (applicable in U.S. only; see reverse).

Roof Deck

Protection

Learn ab

out

gaf.com

STARTER STRIP

SHINGLES

RIDGE CAP

SHINGLES

COBRA®

ATTIC

VENTILATION

LIFETIME

SHINGLES

LEAK

BARRIER

ROOF DECK

PROTECTION

TECHNOLOGYTECHNOLOGY

™

Get AutomaticLifetime Protection On Your Entire GAF Roofing System!*

* See GAF Shingle & Accessory Ltd. Warranty for complete coverage and restrictions. The word “Lifetime” refers to the length of coverage provided by the GAF Shingle & Accessory Ltd. Warranty and means as long as the original individual owner(s) of a single-family detached residence [or the second owner(s) in certain circumstances] owns the property where the shingles and accessories are installed. For owners/structures not meeting the above criteria, Lifetime coverage is not applicable. Lifetime Ltd. Warranty on accessories requires the use of at least three qualifying GAF accessories and the use of Lifetime Shingles.

The GAF Lifetime Roo� ng System has earned the prestigious Good Housekeeping Seal, which means that Good Housekeeping stands behind the products in this system. (Refer to Good Housekeeping Magazine for its consumer protection policy. Applicable in U.S. only.)

• A Lifetime ltd. warranty on your shingles and all qualifying GAF accessories!*

• Non-prorated coverage for the fi rst 10 years*

When you install any GAF Lifetime Shingle and at least 3 qualifying GAF accessories, you’ll automatically get:

More Than Just Coverage On Your Shingles!

GA

F IS 1

00% AMERICAN

OW

NED

CREA

TING AMERICAN

J

OBS!

Homeowner’s Best Choice• Looks Better... Fiberglass reinforced, so it lies flatter than conventional organic felt for a better-looking roof.

• Lies Flatter... Reduces the “telegraphing” of wrinkles that can occur with conventional organic felts.

• Better Protection... Eliminates the need to slit bubbled felt, which may be required when using conventional organic felt (this can compromise the weather-resistant integrity of your roofing system).

• Peace Of Mind… Up to a Lifetime ltd. warranty when installed on Lifetime Shingle roofs.*

Professional’s Best Choice• Avoid Downtime... Rolls out quicker than organic felts.• Reduces Call-backs... Due to elimination of bumpy-looking shingle jobs.

• Easier To Use... Lighter and easier to handle than #30 felt.• Versatile... Can be applied over plywood, wood plank, and all

other approved decks.• Great Value... Competitively priced with #30 felt on a per

square basis.

Shingle-Mate® Roof Deck Protection vs. #30 FeltGlass reinforced to lie flatter Yes No

Reduces the telegraphing of wrinkles across the roof Yes No

Lightweight and easy to handle Yes No

Rolls swiftly in the cold, early morning Yes No

Four-square coverage for faster installation Yes No

Meets physical requirements of ASTM D226, D4869, and is UL classified Yes Varies

Part of GAF Lifetime Roofing System

Yes No

Price Competitive † Yes Varies

See The Difference!

Conventional organic felts can telegraph wrinkles through the roof shingles.

Shingle-Mate® Roof Deck Protection is fiberglass reinforced, so it lies flatter!

Roof Deck Protection

Product Specifications (Nom.)

Roll length . . . . . . . . . . . . . . . . . . . . . . . . 144 ft. (43.89 m)

Roll width . . . . . . . . . . . . . . . . . . . . . . . . . . 36 in. (0.914 m)

Roll weight . . . . . . . . . . Approx. 30 lb. (13.6 kg) per roll

Approx. coverage . . . . .4 squares (432 sq. ft. [40.13 m2])

Florida Building Code Approved

Meets or exceeds the physical requirements of ASTM D226, D4869, and is UL classified

NOTE: Shingle-Mate® Roof Deck Protection must NOT be left exposed to moisture or precipitation.

†Shingle-Mate® Roof Deck Protection is often competitively priced with #30 organic felts on a per square basis (prices vary by market).

©2016 GAF 2/16 • #105 • RESUL127