7/27/2019 Shell Helix Ultra

1/2

September 2011

Shell Helix Ultra

Maximises performance right up to the next oil change

Shell Helix Ultra has been formulated with Shells ultimate active cleansing

technology. It works harder to protect than conventional motor oils bycontinuously helping to prevent dirt and sludge build-up, for betterresponsiveness and improved performance, thus helping your engine tooperate at its full potential right up to the next oil change.

Applications

Suitable for fuel-injected petrol engines fitted withblow-by-gas recirculation and catalytic convertersoperating in extreme driving conditions

Performance features and benefits

Shell's ultimate active cleansing technologyUp to five times more effective at removingsludge from dirty engines than a mineral oil

Long-term oxidation stabilityUp to 30% more protection than other fullysynthetic leading brands tested

Low viscosity, rapid oil flow and low frictionGreater fuel efficiency and easier coldstarting

High shear stabilityMaintains viscosity and stays in gradethroughout the oil-change interval.

Specially selected synthetic base oilsReduce oil volatility and therefore oilconsumption and the need for top-up

Minimises vibration and engine noiseSmoother, quieter drive

Health and safety

Shell Helix Ultra is unlikely to present anysignificant health or safety hazard when properlyused in the recommended application, and goodstandards of industrial and personal hygiene aremaintained.

Avoid contact with skin. Use impervious gloveswith used oil. After skin contact, washimmediately with soap and water.

For further guidance on product health and safetyrefer to the appropriate Shell product safety datasheet.

Protect the environmentTake used oil to an authorised collection point.Do not discharge into drains, soil or water.

Advice

Advice on applications not covered in this leafletmay be obtained from your Shell Representative.

7/27/2019 Shell Helix Ultra

2/2

September 2011

Specifications and approvals

Shell Helix Ultra 0W-40 5W-30 5W-40

API SN/CF Meets the engine testrequirements of API SN/CF.

SN/CF

ACEA A3/B3/B4 A3/B3/B4 A3/B3/B4

VW 502.00505.00

502.00505.00

502.00505.00

Mercedes-Benz 229.5 229.5 229.5

BMW LL-01 LL-01 LL-01

Other approvals or registrations Porsche Porsche A40Ferrari

Fiat (meets the requirements of) 9.55535 Z2

Renault RN 0700,RN0710

RN 0700, RN0710

Typical physical characteristics

Shell Helix Ultra 0W-40 5W-30 5W-40

SAE viscosity grade 0W-40 5W-30 5W-40

Kinematic viscosity (IP 71), cST@ 40C@ 100C

75.213.6

68.212.2

74.413.1

Density @ 15C (IP 365), kg/L 0.84 0.84 0.84Flash point (IP 34), C 215 215 215

Pour point (IP 15), C 42 39 39HTHS viscosity @ 150C, mPaS 3.68 3.50 3.68

These characteristics are typical. Whilst future production will conform to Shells specification, variations inthese characteristics may occur.