sgi biogas co2 removal psa process - Planning & Designponents are high CH4 recove-ry rates, low...
Transcript of sgi biogas co2 removal psa process - Planning & Designponents are high CH4 recove-ry rates, low...
no.6
sgi biogasco2 removal
psa process
General
■ The Process for Biogas Upgrading
The SGI -PSA process for upgra-ding of raw biogas to bio natu-ral gas quality applies a Vacuum regenerated Pressure Swing Adsorption (PSA) tech-nology. CO2, higher CxHy,H2S, odours and other undesired components will be simulta-neously removed by activated carbon and carbon molecular sieves. A methane purity of >96%Vol as well as methane recoveries of 98% can be achieved. The SGI - PSA CO2 removal plants are providing low-cost bio natural gas with a reliable, flexible and trouble free process. SGI - PSA systems and machinery components for feed gas compression and vacuum generation are suc-cessfully employed for the bulk
removal of CO2 from various raw gases. The useful capaci-ties range from several 100 Nm3/h bio natural gas product up to several 1000 Nm3/h.
Special Features
Particular features of SGI's PSA process and machinery com-ponents are high CH4 recove-ry rates, low operating and maintenance costs and ope-rational simplicity. Extensive know-how and engineering expertise guarantee the design and construction of tailor-made and economical plants of the highest quality. Modular, containerized design of the CO2 removal plants reduces erection time and costs at site. The fully prefabri-cated machinery containers are thoroughly tested before they leave SGI's workshop.
SGI - Dry Rotating Machinery
■Dry and oil-free gas com- pression and evacuation
■Non-contacting rotating type
■ Long maintenance free operation
■ Special seal gas system
■ Base frame installation
■ Frequency controlled motor
■Air cooled system
■ Low energy consumption
■ Low maintenance costs
The Advantages
■High CH4-Recovery > 98%
■High CH4-purity > 96%Vol
■High bio natural gas quality
■ Partial removal of N2 and O2
■ Low energy for dry running machinery up to
■≤ 0,17 kWh/Nm3 for feed gas ≥ 800Nm3/h and
■≤ 0,20 kWh/Nm3 for feed gas ≤ 800 Nm3/h
■Dry process without oil contaminations
■No use of chemicals
■ Low corrosion
■ Less maintenance
■Reliable and flexible process
■ Fully automatic operation
■Competitive investment cost
■Containerized design
SGI - Biogas - PSA
■High efficiency
■ Long maintenance free operation
■ Base frame installation
■Automatic start and stop in every operating position
■Automatic adjusting pro- cess in accordance to feed gas quantity and quality
■ Low maintenance costs
Process Flow Diagram of SGI Biogas CO2 Removal PSA Process
=
SGI Biogas -CO2 Removal PSA Process
SGI - Machinery Container
SGI - Biogas - PSA and Multi Stage Machinery Container for:
■Biogas - PSA
■Dry and oil-free gas com-pression and evacuation
Advantage of machine con-tainer installation
■No need for a special machine foundation, only a concrete base plate is required for the machine container
■No need for a noise pro- tected and ventilated machine house or building
■ The PSA and the machine- ry is completely installed and piped in the machine container
■ The machines are installed inside the container on flexible machine elements so that no dynamic machi- ne forces are transferred to the concrete base plate
■Wiring of PSA machines and instrumentation to a terminal box inside the machine container
■Noise protection of the machine container wall down to 80 dB(A)pressure sound level in 1 m distance from outside container wall
■Ventilation inside the con- tainer to transfer the radiated machine heat via the ventilation air outside
the container including inlet and outlet noise elimi- nation houses
■ Short installation time because PSA and machi- nery inside container is completely mounted, piped, instrumented, wired and tested.
=
SGI Biogas -CO2 Removal PSA Process
PO. BOX 1039 ● 63668 Altenstadt DeutschlandHelmershäuser Str. 34 ● 63647 Altenstadt Deutschland
Phone: + 49 (0) 6047/98 10 0 ● FAX: + 49 (0) 6047/72 50E-Mail : [email protected]
Homepage: www.sgi-prozesstechnik.de