Setting up your iQ3 - Foxtel · 2017-07-10 · Cable Input Digital Audio Out Optical HDMI Ethernet...
Transcript of Setting up your iQ3 - Foxtel · 2017-07-10 · Cable Input Digital Audio Out Optical HDMI Ethernet...
Cable Input
Digital Audio Out
Optical HDMI Ethernet
12V DC5A max
USB5V DC 500mA
Coaxial
Setting up your iQ3Here’s how to set up your iQ3 to access the world of Foxtel entertainment.
2 Connect your iQ3 to your TV
– If you’re upgrading your box, use your existing Foxtel, HDMI and Ethernet cables where possible.
– Once you’re connected, turn your TV back on and select the HDMI source you’ve connected to.
– You will see a black screen for a couple of minutes and then just follow the prompts.
Need a helping hand? For iQ3 tips and tricks, check out your welcome book enclosed or view the Help videos in the ‘Using iQ3’ section of your Home menu. For troubleshooting or support, go to the ‘Help’ section in your Settings menu or visit foxtel.com.au/support
5 Connect your iQ3 to the internet
To get the most out of your iQ3 features, connect your Ethernet cable from your internet access point to the back of the iQ3, or connect to WiFi by following these steps:
Select Home on your iQ3 remote, then arrow right and select Settings.
Select WiFi.Select Internet Connection. Select your network. Enter your WiFi password, select Done and you will be advised once connected.
1 First up, let’s check you’ve got all the goods
Remote and Batteries
iQ3 Box Foxtel Cable(new customers only)
Ethernet CableHDMI Cable Power Lead with Power Pack
3 Pair your Bluetooth remote
Insert the batteries provided into your remote. The blue light on your remote will start flashing.
FOX
09
30 0
4/17
iQ
3 C
AB
Press and hold the Home button on the iQ3 remote until the light at the top of your remote stops flashing and remains blue, then you’re all set!
Once the standby button on your iQ3 has turned blue, bring your remote to the front of your box. Brush your hand slowly across the front of your iQ3 until the front panel lights up.
4 Call 1300 732 681 to activate your iQ3
Don’t be a maverick – make sure your TV (and existing Foxtel box if you have one) is turned off at the wall.
To Foxtelwall plate
To TV To internet access point(optional, see step 5)
To power point
FOX0930_iQ3_CAB_C1.indd 1 19/04/2017 4:25 PM