Remote Monitoring and Control System for DC Motor using Zigbee ...
SETTING ADDRESS MODEL:T3-CV 2.5G WIRELESS REMOTE...
Transcript of SETTING ADDRESS MODEL:T3-CV 2.5G WIRELESS REMOTE...
EcolocityLED.com [email protected] 775-636-6060
AD
DR
ESSSETTIN
G
LED CONTROLLERMODEL:T3-CV
2.5G WIRELESS REMOTE CONTROL
POWER INPUT: DC5V-DC24VOUTPUT: 6A x 3CH
WW
WV+
RG
BV+
WW
WN
CV+
OU
TPU
T
POW
ER
DC
+D
C-
CONNECTION INSTRUCTIONS Temp Adjust LED Sync Dimmer and Receiver Guide
Top View of Wireless Receiver
ADDRESS SETTINGUse this button to pair
Receiver to RF Remote orWiFi Controller.
5-24VDC INPUTInput from 5-24VDC
power supply
Maximum Output6A x 2CH Max Output
12VDC-144W Max24VDC-288W Max
Single Channel Output6A x 1CH Max Output
12VDC-72W Max24VDC-144W Max
5-24VDC POWER SUPPLY
AD
DR
ESSSETTIN
G
L E D CONTROL L E RMODEL:T3-CV
2.5G WIRELESS REMOTE CONTROL
POWER INPUT: DC5V-DC24VOUTPUT: 6A x 3CH
WW
WV+
RG
BV+
NW
WW
NC
V+
OU
TPU
T
POW
ER
DC
+D
C-
Two Channel Output6A x 2CH Max Output
12VDC-72W per channel (x 2 channels)24VDC-144W per channel (x 2 channels)
Connecting with Temperature Adjustable LEDsT2 Remote
12A Max
5-24VDC POWER SUPPLY
AD
DR
ESSSETTIN
G
L E D CO NTROL L E RMODEL:T3-CV
2.5G WIRELESS REMOTE CONTROL
POWER INPUT: DC5V-DC24VOUTPUT: 6A x 3CH
WW
WV+
RG
BV+
NW
WW
NW
V+
OU
TPU
T
POW
ER
DC
+D
C-
+
_
-12V-
36
0
+
_
36
0
+
_
36
0
+
_
36
0
+
_
36
0
+
_
36
0
+
_
36
0
+
_
36
0 18A Max
AVOID THIS COMMON MISTAKE
+ ++ +
Receiver Pairing Instructions1.) Apply 5-24VDC power to your wireless receiver2.) Turn on power to your T2 remote3.) Press the address setting button once on your
wireless receiver and let go4.) The small address setting indicator light will turn
solid red5.) Immedietaly press and hold any button on the T2 remote that you wish to pair6.) Hold until you hear a long beep7.) The LED light on the T2 remote will flash 3 times 8.) Your wireless receiver is now paired9.) Repeat this process for multiple receivers9.) To un-pair a receiver press and hold the address
setting button for 5 seconds until a long beep
NO CONNECTION
ON/OFF
CT+/CT-
SPEED+SPEED-
BRT+BRT-
CTSHORTCUT KEY
SCENE MODE
BRTSHORTCUT KEY
Turn on or turn off the receiver.(turn on or turn off light)
DELAY OFF
●
●
●
●
●
●
●
●
●
●
●
Long press for 3 seconds to memorize the current color temperature status. Can memorize three groups’ color temperature status in total.
Press the keys to quickly select the high, medium or low color temperature status.
Press the keys to delay power off (or turn off the lights) in 30 seconds or 1 hour.
Press either key to enter the color temperaturegradual mode.Press again to increase or decrease the gradual speed.
Press the keys to adjust the brightness.Keep pressing to adjust brightness continuously.
Press the keys to increase or decrease the color temperature of the LED.Keep pressing to adjust the color temperature continuously.
Press the keys to quickly select the high, medium or low level of brightness for current color temperature.
Remote control sign Descriptionkey