Setting a Global Standard. MS... · depending on the casing program. • High pressure, high load...

MS-15® MudlineSuspension Systems

www.dril-quip.com

Setting a Global Standard

MS-15® Mudline SuSpenSion SySteMS

table of ContentS

MS-15 Mudline Suspension System . . . . . . . 2

MS-15 System Components . . . . . . . . . . . . . . . 3

• Shoulder Hangers . . . . . . . . . . . . . . . . . . . . . . . . . 4

• Split Ring Hangers . . . . . . . . . . . . . . . . . . . . . . . . 5

• Mudline Hanger Running Tools . . . . . . . . . . . . . 6

• Profile Cleanout Tools . . . . . . . . . . . . . . . . . . . . . 7

• Temporary Abandonment Caps . . . . . . . . . . . . . 8

• Accessory Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

• Tie-Back Phase and Tools . . . . . . . . . . . . . . 10-11

Mudline Conversion System . . . . . . . . . . . . . 12

Dril-Thru™ Completion System . . . . . . . . . . 13

Mudline-Related Products . . . . . . . . . . . . . . . 14

Strength & Dimension Charts . . . . . . . . . . . . 16

1

dril-Quip: leader in teChnology and Quality

Recognized worldwide for cutting-edge exploration,

drilling and production technology, Dril-Quip’s state-of-the-art equipment, support and service give unique advantages to operators in today’s tough environments.

Dril-Quip provides consistent high quality products in accordance with industry standards, employing the most advanced equipment and techniques available to ensure dimensional accuracy and performance reliability.

Our engineering staff brings their proven skills and experience to bear on the complex challenges encountered in the field, helping operators find viable product solutions for industry applications.

Dril-Quip’s unique MS-15 Mudline Suspension System is a series of casing hangers that support the weight of each casing string at or near the mudline. Designed for use with bottom-supported drilling vessels and platforms, the system allows disconnect from and reconnect to the well at the mudline.

SySteM featureS

• High pressure capacity; system rated for 15,000 psi working pressure

• High load capacity at each hanger interface

• Easy handling, trouble- free operation

• Hangers have left-hand running threads, right-hand tie-back threads

• Metal-to-metal seals on running and tie-back tools with resilient backup seals

• Automatic centralization ensures concentricity

• Stack-down system for washout efficiency and easy access to tie-back thread profile

• Designed for temporary abandonment

• Designed with large flow-by areas

• Subsea completion possible with Dril-Quip’s Mudline Conversion System

• Critical service configurations available

• Extra metal-to-metal sealing for higher pressure and critical service

• Extra centralization for high-angle drilling

• Heavier wall for greater load and pressure capacity

• Fully tested

• Field-proven technology

• Torque tool option available for running tools

2

MS-15 Mudline SuSpenSion SySteM

3

Drilling Phase

TemPorary abanDonmenT Phase

MS-15 SySteM CoMponentS

20" Shoulder Hanger

13 3/8" Shoulder Hanger

Buttweld Sub

9 5/8" Split Ring Hanger

7" Split Ring Hanger

Running Tools

30" Corrosion Cap

30" Quick-Jay™ Connector

Temporary Abandonment Caps

4

The Shoulder Hanger will use a multiple load shoulder profile in

the hanger’s ID to transition to the Split Ring Hanger for running

casing string with higher load-carrying requirements.

There are two types of Casing Hangers utilized in the MS-15 Suspension System:

Shoulder Hangers and Split Ring Hangers. Shoulder Hangers are generally required with larger-size casing strings and are used when enough annular space exists to allow a single load shoulder to hang the casing load and still pass the drill bit needed for the casing string. The Shoulder Hanger features either a single or multiple load shoulder profile in the ID, depending on the casing program.

• High pressure, high load capacity

• Easy installation; weight- set hanger

• Field-interchangeable landing rings accommodate changes in casing programs

• Large flow-by areas for run-ning and cementing

• Full 360-degree load- bearing area on landing ring for maximum load-carrying capacity

• Unique, two-step landing ring provides automatic centralization when landed

• Independent metal-to-metal sealing surfaces; one for running tools, one for tie-back tools

featureS

Shoulder hangerS

Running Tool Metal- to-Metal Seal Area

Right-Hand Tie-Back Threads

Left-Hand Running Threads

Two-Step Landing Ring

Multiple Load Shoulders for

Split Ring Hanger

Split Ring Hanger

Tie-Back Tool Metal-to-Metal Seal Area

shoulDer hanger wiTh mulTiPle loaD shoulDer hanger Profile anD sPliT ring hanger insTalleD

Running Tool Metal- to-Metal Seal

Right-Hand Tie-Back Threads

Left-Hand Running Threads

Two-Step Landing Ring

Single Load Shoulder for Shoulder Hanger

shoulDer hanger wiTh single shoulDer Profile

5

When casing loads exceed a single load shoulder’s ability

to support the weight of the casing string, the MS-15 system uses a unique Split Ring Hanger with a multiple load shoulder profile. The system’s patented split ring and detent ring accommodate high loads while allowing passage of required drill bit sizes.


• Large flow-by areas during running and cementing

• Unique design ensures full engagement of each split ring load shoulder with mating profile

featureS

Split ring Setting SeQuenCe

• Positive backup of split ring when landed

• Detent ring allows hanger resetting while eliminating shear pins and tensile coupons

• Dual metal-to-metal seals; one for running tools, one for tie-back tools

1. running PosiTion

Hanger Body

Load Ring

Split Ring — multiple load shoulders on split ring protected from casing ID while running

Detent Ring — elimi-nates premature vertical movement of split ring

Hanger Body — provides full centralization with load ring above split ring and retainer ring below split ring

Split Ring — energy in split ring forces multiple load shoulders into mating profile of outer hanger ID

2. lanDeD/noT DeTenTeD 3. DeTenTeD PosiTion

Load Ring — maintains large flow-by area and provides high load capacity at interface of split ring and hanger

Hanger Body — backup shoulder provides full backup behind top of split ring

Detent Ring — activated by casing weight and centralizes split ring, provides full backup behind bottom of split ring

Split ring hangerS

The MS-15 Mudline Hanger Running Tool allows the casing string to be run and landed in the pre-

vious mudline hanger. The running tool incorporates tangentially bored washports for cleaning the annulus between casing strings. The tool’s left-hand threads allow the use of right-hand rotation to remove the running string or open the washports.

Right-hand rotation of approximately six turns with weight picked up opens washports for washout of casing. After wash-

out, weight is slacked off and running tool is made up.

OPEN CLOSED

sTab-in running Tool

OPEN CLOSED

ThreaDeD running Tool

Right-hand rotation of approximately six turns opens wash-ports for washout of casing. After washout, running tool is

made up with six turns to the left.

featureS

6

Mudline hanger running toolS


• Low torque make-up

• Self-aligning profile allows full alignment with hanger prior to thread engagement

• Slots for direct make-up of running tool with torque tool are optional

• Optional stab-in running tools for mudline hangers 16" and larger eliminate left-hand rotation

• Dual O-rings above washports

• Seal below washport never exposed during wash operations

• One-way seal on nose of pin prevents pressure lock during make-up

• Field-proven performance

Run on drill pipe, the MS-15 Profile Cleanout Tool is used to verify the

distance to the multiple load shoulder profile and prepares the mudline hanger ID for the split ring hanger. The profile cleanout tool is rotated to clean out the multiple load shoulder ID. Wash fluid can be pumped through the drill pipe during this operation.

7

RUNNING PROFILE CLEANOUT TOOL

PROFILE CLEANOUT TOOLLANDED

Profile cleanout tool cleaning outmultiple-load shoulder with indicatorring sheared and moved up into sheared position

Profile cleanout tool being run insideriser with notched split ring in retracted position

running Profile CleanouT Tool

RUNNING PROFILE CLEANOUT TOOL

PROFILE CLEANOUT TOOLLANDED

Profile cleanout tool cleaning outmultiple-load shoulder with indicatorring sheared and moved up into sheared position

Profile cleanout tool being run insideriser with notched split ring in retracted position

Profile CleanouT Tool lanDeD

• Notched split ring for thorough cleaning of multiple load shoulder profile in ID of previ-ously-run hanger body

• Jet ports for washing out multiple load shoulder profile

• Indicator ring verifies full cleanout of multiple load shoulder profile

• Used to verify the distance to the multiple load shoulder profile

featureS

profile Cleanout toolS

The MS-15 Mudline Suspension System offers Temporary Abandonment (TA) Caps that protect

each mudline hanger’s tie-back profile from debris during abandonment and while the well is in suspension. Temporary Abandonment Caps make up in the hanger running tool threaded profile and supply resilient seals between the TA Cap and the mudline hanger.

The MS-15 system also offers a simple, weight-set, rotation-lock stab-in TA Cap. When angular misalignment is a problem, this cap allows temporary abandonment of the mudline hanger. The cap’s threaded split lock ring engages the running threads in the mudline hanger.

Threaded TA Cap Stab-In TA Cap

featureS

• Simple installation

• Caps make up into left-hand running threads, protecting tie-back threads

• Full alignment prior to make-up

• Available vented or with back-pressure valve

• Low torque make-up

• Optional stab-in TA cap allows weight-set make-up

8

teMporary abandonMent CapS

Temporary Abandonment Cap Running and Retrieving Tool

An overshot type tool with three J-slot profiles, the MS-15 TA Cap Running and Retrieving Tool runs on drill pipe and lands on the TA cap mandrel with running and retrieving J-lugs.

featureS

• Removable back-pressure valve stinger available

• Seals and locks to top of TA cap mandrel

• Porting for pressure control of well

TA cap running and retrieving tool installing a vented TA cap

VENTED TA CAP

TA cap running and retrieving tool ins-talling a TA cap with back-pressure valve

TA CAP WITHBACK-PRESSURE VALVE

TA cap running and retrieving tool installing a TA cap with back-pressure valve

Ta CaP wiTh baCk-Pressure ValVe

TA cap running and retrieving tool installing vented TA cap

VenTeD Ta CaP

TA Cap Running Tool

Tie-Back Profile Cleanout Tool Dril-Quip’s Tie-Back Profile Cleanout Tool runs on drill pipe. It is used to wash out the tie-back thread profile and the sealing surface between the tie-back tool and the mudline hanger ID.

Temporary Abandonment Cap Mill and Flush ToolThis component of the MS-15 Mudline Suspension System cleans off the running and retrieving man-drel located on the TA cap. This prepares the TA cap retrieval J-lugs for easy access with the TA cap run-ning and retrieving tool.

featureS

Tie-Back Profile Cleanout Tool

• Runs on drill pipe

• Available for any size Dril-Quip TA cap

• Mills large debris from around TA cap mandrel

• Jetting nozzles wash debris from around TA cap mandrel

Temporary Abandonment Cap Mill and Flush Tool

• Uses top of hanger as reference point for positioning washout holes at tie-back threads and tie-back sealing surface

• Available for any size Dril-Quip mudline hanger

Tie-Back Profile Cleanout Tool

TA Cap Mill and Flush Tool

9

Tie-back profile cleanout tool cleaning out tie-back threads and metal-to-metal seal

TA cap mill and flush tool cleaning TA cap running and retrieving mandrel

Tie-baCk Profile CleanouT Tool Ta CaP mill anD flush Tool

aCCeSSory toolS

The stack-down configuration and unique design features of the MS-15 Mudline

Suspension System make it an excellent choice for production wells.

Centralizing shoulders on each hanger body help establish concentricity around the centerline of the well. Centralized tie-back tools incorporate an alignment profile that forces full alignment between the tool and the hanger body prior to any thread engagement. Special stab-in tie-back tools are available to solve problems with angular misalignment and platform-to-well misalignment.

SySteM featureS

• System stacks down to fully expose tie-back threads

• Reliable metal-to-metal sealing

• Tie-back threads and sealing areas are unused and protected during drilling

• Hangers have left-hand running threads, right-hand tie-back threads

• All strings tie back using right-hand rotation

13 3/8" Shoulder Hanger

30" Buttweld Sub

7" Split-Ring Hanger

9 5/8" Split-Ring Hanger

20" Shoulder Hanger

Threaded Tie-Back Tools

Stab-In Tie-Back Tools

Split Ring

Detent Ring

10

Tie-baCk sTab-in

Tie-baCk Phase

tie-baCk phaSe

Dril-Quip’s MS-15 Tie-Back Tools reconnect the mudline hanger to the surface for completion.

For subsea completion, the tools tie the well back to a tubing head.

The Stab-In Tie-Back Tool offers a simple, weight-set design that provides an easy way to tie back to the well when platform misalignment is a problem. It includes a threaded split lock ring that engages the tie-back threads in the top of each mudline hanger.

featureS

• Fully aligned prior to make-up

• High pressure containment provided by metal-to-metal primary seal and resilient backup seals

• Sized to match each Dril-Quip mudline hanger

• Threaded tie-back tool makes up with just six right-hand turns for metal-to-metal seal with resilient backup

• Stab-in tie-back tool’s resilient seals are weight set; metal-to-metal seals energize with ½ to 1 right-hand rotations

Threaded Tie-Back Tool

Tie-BackTorque Tool

Stab-In Tie-Back Tool

11

Run on drill pipe, Dril-Quip’s Tie-Back Torque Tool is used to apply high direct torque to the Stab-In Tie-Back Tool.

featureS

• Spring-loaded torque keys for easy torque slot engagement

• Sized to match each Dril-Quip tie-back tool

• Can be used to apply torque to mudline hanger running tools equipped with torque slots

Tie-baCk Torque Tool

tie-baCk toolS

Subsea completions on mudline-suspended wells are possible with Dril-Quip’s Mudline

Conversion System. This system of adapters provides an efficient way to convert a mudline suspension system for subsea completion.

SySteM featureS

• Subsea tubing hanger installs through BOP stack and riser for safe rig operations

• Metal-to-metal sealing profile optional in tubing hanger ID

• Diver-friendly make-up adapter ring on tubing head provides centralization, maximum height adjustment and rigid support

• Tubing head provides internal lockdown profile for annulus metal-to-metal sealing and positive lockdown of tubing hanger

• Field-proven tubing hanger systems available

Mudline ConverSion SySteM

12

Tubing Hanger

Adapter Ring

Subsea Tree

Stab-In Tie-Back Tool

Tubing Hanger w/ Radial Bolt Connector Profile

Bit Guide

MUDLINE

Typical tie-back conversion; alternative casing programs and configurations available upon request

Mudline

SySteM featureS

• Drilling and completion work possible through conventional BOP equipment

• Wellhead hanger housing can accommodate several casing hangers and a tubing hanger

• Internal lockdown profile for positive lockdown of tubing hanger

• Metal-to-metal sealing throughout

• Diver or diverless tree make-up

• Field-proven performance

13

The Dril-Thru Mudline Completion System is a unique mudline

suspension system designed to accept subsea tubing hangers and subsea completion trees without the use of adapters. This system simplifies operations when it is known in advance that the well will be completed with a subsea tree.

dril-thru™ Mudline CoMpletion SySteM

ProDuCTion Phase

Drilling Phase

Mudline Hanger Wellhead Housing

Wellhead Housing Running Tool

Tubing Hanger

Tubing Hanger Running Tool

20" Dril-Thru Mudline Hanger

Production Casing Hanger

14

CS-10™ CASING SUPPORT SYSTEM

Dril-Quip fabricatescomplete casing joints for both drilling and driving applications . Dril-Quip offers a variety of connectors that are ideal for use with mudline suspension equipment .

Quik-Thread® Connectors

Quik-Jay™ Connectors

Quik-Stab® Connectors

Multi-Thread™ Connectors

The CS-10 Casing Support System is used primarily in platform applications to decrease load on the platform by hanging casing off at the mudline.

Cs-10™ Casing suPPorT sysTem

sPeCialTy Casing ConneCTors

Dril-Quip offers a high pressure, high temperature mudline suspension system for use in critical-service applications. These critical-service systems incorporate all of the field-proven features of the MS-15 and include additional metal-to-metal sealing and centralization.

TIE-BACK PRODUCTIONDRILLING MODE

CRITICAL SERVICE SYSTEM

Drilling moDe Tie-baCk ProDuCTion

CriTiCal serViCe sysTem

dril-Quip: a Single-SourCe Supplier for Mudline-related produCtS

The SC-90 Conventional Wellhead is a cost-effective wellhead for land, jack-up or platform drilling and completion applications.

SC-90™ CONVENTIONALWELLHEAD SYSTEM

Dril-Quip’s Unitized Wellhead System adapts to most casing programs, has dual metal-to-metal seals and is available for standard or H2S service.

The SU-90 Unitized Wellhead’s compact design, along with accessories for height and tension adjustment, make it ideal for use on platforms and with MS-15 Mudline Suspension Systems.

SU-90™ UNITIZEDWELLHEAD SYSTEM

su-90™ uniTizeD wellheaD sysTem

sC-90™ ConVenTional wellheaD sysTem

Dril-Quip offers traditional and unitized surface wellheads for use in with its mudline suspension

product line for jacket and platform applications. The company’s surface wellhead equipment is offered in a variety of sizes, configurations and service ratings. Dril-Quip’s unitized surface wellheads feature metal-to-metal sealing technology and simplified operational procedure to reduce installation time.

15

Dril-Quip’s surface completion trees have been designed to incorporate metal-to-metal sealing technology and safe, effective production solutions for onshore and offshore well developments. The Company’s trees include API-monogrammed gate valve components that are designed to comply with all applicable API specifications and Dril-Quip’s ISO 9000, 9001 Quality System. Dril-Quip utilizes a variety of tests to verify the performance of its trees and valves to ensure the highest possible standards.

Dril-Quip template systems provide the operator with the ability to arrange production wells in a pattern. This eliminates the possibility of intersecting wells or well misalignment by forcing direct centerline-to-centerline well spacing. All Dril-Quip template systems come with the required alignment and concentricity accessories to facilitate vertical installation of equipment during the drilling phase. Dril-Quip template systems supply alignment features to the jacket installation and also provide trouble-free operations during the tie-back phase.

dril-Quip: a Single-SourCe Supplier for Mudline-related produCtS

SIZE(inches)

24

24 x 16

16 x 103/4

103/4 x 75/8

TYPEHANGER

—

SH

SH

SP

INTERNALYIELD

PRESSURE(psi)

—

5,000

12,000

15,000

TENSIONYIELD

PRESSURE (x 1,000 lbs)

3,300

3,300

1,700

1,200

MAX.OD

(inches)

—

21.125

14.500

9.500

HANGER WILLRUN THROUGH

—

211/4" BOP

16" x 109 lb/ft. Csg.

10 3/4" x 60.7 lb/ft. Csg.

MIN. ID(inches)

22.240

13.802

9.928

6.802

MAX.BIT

SIZE(inches)

22

133/4

97/8

63/4

24" x 16 "x 103/4" x 7 5/8" Casing Program

SH Indicates shoulder type hanger SP Indicates split ring type hanger

MIN.RETURN

AREA(sq in)

—

24

12

6

30

30 x 20

20 x 133/8

133/8 x 95/8

95/8 x 7 (32-38 lb)

SIZE(inches)

—

SH

SH

SP

SP

TYPEHANGER

—

5,000

10,000

16,500

17,500

INTERNALYIELD

PRESSURE(psi)

3,800

3,800

2,400

2,000

700

TENSIONYIELD


—

27.250

18.510

12.188

8.375

MAX.OD

(inches)

—

48

13

10

5

MIN.RETURN

AREA (sq in)

—

30 x 1" Wall Pipe

20" x 133 lb/ft. Csg.

133/8" x 72 lb/ft. Csg.

95/8" x 53.5 lb/ ft. Csg.


26.250

17.553

12.490

8.803

5.905

MIN. ID(inches)

26

171/2

121/4

83/4

57/8

MAX.BIT

SIZE(inches)

30" x 20" x 133/8" x 95/8" x 7 " Casing Program


30

30 x 133/8

133/8 x 95/8

95/8 x 7 (32-38 lb)

SIZE(inches)

—

SH

SP

SP

TYPEHANGER

—

9,700

16,500

17,500

INTERNALYIELD

PRESSURE(psi)

2,900

2,900

2,000

900

TENSIONYIELD


—

21.125

12.188

8.375

MAX.OD

(inches)

—

28

10

5

MIN.RETURN

AREA(sq in)

—

211/4" BOP

133/8" x 72 lb/ft. Csg.

95/8" x 53.5 lb/ft. Csg.


20.125

12.490

8.803

5.905

MIN. ID(inches)

20

121/4

83/4

57/8

MAX.BIT

SIZE(inches)

30" x 133/8" x 95/8" x 7" Casing Program (211/4 " BOP)


Dril-Quip manufactures and stocks a wide variety of mudline suspension systems to match most casing programs. The following charts are for typical casing programs. Contact a Dril-Quip representative to obtain strength-and-dimension charts for specific casing programs.

16

36

36 x 24

24 x 185/8

185/8 x 133/8

133/8 x 9 5/8

95/8 x 7 (32-38 lb)

SIZE(inches)

—

SH

SP

SP

SP

SP

TYPEHANGER

—

5,000

7,500

11,000

16,500

17,500

INTERNALYIELD

PRESSURE(psi)

5,000

5,000

4,500

3,000

2,000

710

TENSIONYIELD

PRESSURE(x 1,000 lbs)

—

29.250

22.000

17.000

12.188

8.375

MAX.OD

(inches)

—

48

15

12

10

5

MIN.RETURN

AREA(sq in)

—

291/2" BOP

243/4" Wall Pipe

185/8" x 136 lb/ft. Csg.

133/8" x 72 lb/ft. Csg.

95/8" x 53.5 lb/ ft. Csg.


28.250

22.240

17.553

12.490

8.803

5.905

MIN. ID(inches)

28

22

171/2

121/4

83/4

57/8

MAX.BIT

SIZE(inches)

36" x 24" x 185/8" x 133/8" x 95/8" x 7 " Casing Program


36

36 x 36

26 x 20

20 x 133/8

133/8 x 95/8

95/8 x 7(32-38 lb)

SIZE(inches)

—

SH

SP

SP

SP

SP

TYPEHANGER

—

3,000

5,000

10,000

16,500

17,500

INTERNALYIELD

PRESSURE(psi)

4,500

3,700

3,500

3,000

2,250

910

TENSIONYIELD


—

29.250

24.000

17.446

12.188

8.375

MAX.OD

(inches)

—

291/2" BOP

26" x .812" Wall Pipe

20" x 1.00" Wall Pipe

133/8" x 72 lb/ft. Csg.

95/8" x 53.5 lb/ft. Csg.


28.250

24.125

17.553

12.490

8.803

5.905

MIN. ID(inches)

28

24

171/2

121/4

83/4

57/8

MAX.BIT

SIZE(inches)

36" x 26" x 20"x 133/8" x 95/8" x 7 " Casing Program


—

22

28

13

13

5

MIN.RETURN

AREA (sq in)

SIZE(inches)

30

30 x 16

16 x 103/4

103/4 x 75/8

TYPEHANGER

—

SH

SP

SP

INTERNALYIELD

PRESSURE(psi)

—

5,000

12,000

15,000

TENSIONYIELD


3,800

3,300

1,700

1,200

MAX.OD

(inches)

—

27.530

14.500

9.500


—

30" x 1" Wall Pipe

16" x 109 lb/ft. Csg.

10 3/4" x 60.7 lb/ft. Csg.

MIN. ID(inches)

26.470

14.990

9.928

6.802

MAX.BIT

SIZE(inches)

26

143/4

97/8

63/4

30" x 16" x 103/4" x 7 5/8" (or 7") Casing Program


MIN.RETURN

AREA (sq in)

—

48

12

6

SIZE(inches)

24

24 x 16

16 x 103/4

103/4 x 75/8

TYPEHANGER

—

SH

SH

SP

INTERNALYIELD

PRESSURE(psi)

—

5,000

12,000

15,000

TENSIONYIELD


3,300

3,300

1,700

1,200

MAX.OD

(inches)

—

21.125

14.500

9.500


—

211/4" BOP

16" x 109 lb/ft. Csg.

10 3/4" x 60.7 lb/ft. Csg.

MIN. ID(inches)

22.240

13.802

9.928

6.802

MAX.BIT

SIZE(inches)

22

133/4

97/8

63/4

24" x 16 "x 103/4" x 7 5/8" Casing Program


MIN.RETURN

AREA(sq in)

—

24

12

6

30

30 x 20

20 x 133/8

133/8 x 95/8

95/8 x 7 (32-38 lb)

SIZE(inches)

—

SH

SH

SP

SP

TYPEHANGER

—

5,000

10,000

16,500

17,500

INTERNALYIELD

PRESSURE(psi)

3,800

3,800

2,400

2,000

700

TENSIONYIELD


—

27.250

18.510

12.188

8.375

MAX.OD

(inches)

—

48

13

10

5

MIN.RETURN

AREA (sq in)

—

30 x 1" Wall Pipe

20" x 133 lb/ft. Csg.

133/8" x 72 lb/ft. Csg.

95/8" x 53.5 lb/ ft. Csg.


26.250

17.553

12.490

8.803

5.905

MIN. ID(inches)

26

171/2

121/4

83/4

57/8

MAX.BIT

SIZE(inches)

30" x 20" x 133/8" x 95/8" x 7 " Casing Program


30

30 x 133/8

133/8 x 95/8

95/8 x 7 (32-38 lb)

SIZE(inches)

—

SH

SP

SP

TYPEHANGER

—

9,700

16,500

17,500

INTERNALYIELD

PRESSURE(psi)

2,900

2,900

2,000

900

TENSIONYIELD


—

21.125

12.188

8.375

MAX.OD

(inches)

—

28

10

5

MIN.RETURN

AREA(sq in)

—

211/4" BOP

133/8" x 72 lb/ft. Csg.

95/8" x 53.5 lb/ft. Csg.


20.125

12.490

8.803

5.905

MIN. ID(inches)

20

121/4

83/4

57/8

MAX.BIT

SIZE(inches)

30" x 133/8" x 95/8" x 7" Casing Program (211/4 " BOP)


MS-15 StrengthS and diMenSionS

36

36 x 24

24 x 185/8

185/8 x 133/8

133/8 x 9 5/8

95/8 x 7 (32-38 lb)

SIZE(inches)

—

SH

SP

SP

SP

SP

TYPEHANGER

—

5,000

7,500

11,000

16,500

17,500

INTERNALYIELD

PRESSURE(psi)

5,000

5,000

4,500

3,000

2,000

710

TENSIONYIELD


—

29.250

22.000

17.000

12.188

8.375

MAX.OD

(inches)

—

48

15

12

10

5

MIN.RETURN

AREA(sq in)

—

291/2" BOP

243/4" Wall Pipe

185/8" x 136 lb/ft. Csg.

133/8" x 72 lb/ft. Csg.

95/8" x 53.5 lb/ ft. Csg.


28.250

22.240

17.553

12.490

8.803

5.905

MIN. ID(inches)

28

22

171/2

121/4

83/4

57/8

MAX.BIT

SIZE(inches)



36

36 x 36

26 x 20

20 x 133/8

133/8 x 95/8

95/8 x 7(32-38 lb)

SIZE(inches)

—

SH

SP

SP

SP

SP

TYPEHANGER

—

3,000

5,000

10,000

16,500

17,500

INTERNALYIELD

PRESSURE(psi)

4,500

3,700

3,500

3,000

2,250

910

TENSIONYIELD


—

29.250

24.000

17.446

12.188

8.375

MAX.OD

(inches)

—

291/2" BOP



133/8" x 72 lb/ft. Csg.

95/8" x 53.5 lb/ft. Csg.


28.250

24.125

17.553

12.490

8.803

5.905

MIN. ID(inches)

28

24

171/2

121/4

83/4

57/8

MAX.BIT

SIZE(inches)



—

22

28

13

13

5

MIN.RETURN

AREA (sq in)

SIZE(inches)

30

30 x 16

16 x 103/4

103/4 x 75/8

TYPEHANGER

—

SH

SP

SP

INTERNALYIELD

PRESSURE(psi)

—

5,000

12,000

15,000

TENSIONYIELD


3,800

3,300

1,700

1,200

MAX.OD

(inches)

—

27.530

14.500

9.500


—

30" x 1" Wall Pipe

16" x 109 lb/ft. Csg.

10 3/4" x 60.7 lb/ft. Csg.

MIN. ID(inches)

26.470

14.990

9.928

6.802

MAX.BIT

SIZE(inches)

26

143/4

97/8

63/4



MIN.RETURN

AREA (sq in)

—

48

12

6

17

36

36 x 24

24 x 185/8

185/8 x 133/8

133/8 x 9 5/8

95/8 x 7 (32-38 lb)

SIZE(inches)

—

SH

SP

SP

SP

SP

TYPEHANGER

—

5,000

7,500

11,000

16,500

17,500

INTERNALYIELD

PRESSURE(psi)

5,000

5,000

4,500

3,000

2,000

710

TENSIONYIELD


—

29.250

22.000

17.000

12.188

8.375

MAX.OD

(inches)

—

48

15

12

10

5

MIN.RETURN

AREA(sq in)

—

291/2" BOP

243/4" Wall Pipe

185/8" x 136 lb/ft. Csg.

133/8" x 72 lb/ft. Csg.

95/8" x 53.5 lb/ ft. Csg.


28.250

22.240

17.553

12.490

8.803

5.905

MIN. ID(inches)

28

22

171/2

121/4

83/4

57/8

MAX.BIT

SIZE(inches)



36

36 x 36

26 x 20

20 x 133/8

133/8 x 95/8

95/8 x 7(32-38 lb)

SIZE(inches)

—

SH

SP

SP

SP

SP

TYPEHANGER

—

3,000

5,000

10,000

16,500

17,500

INTERNALYIELD

PRESSURE(psi)

4,500

3,700

3,500

3,000

2,250

910

TENSIONYIELD


—

29.250

24.000

17.446

12.188

8.375

MAX.OD

(inches)

—

291/2" BOP



133/8" x 72 lb/ft. Csg.

95/8" x 53.5 lb/ft. Csg.


28.250

24.125

17.553

12.490

8.803

5.905

MIN. ID(inches)

28

24

171/2

121/4

83/4

57/8

MAX.BIT

SIZE(inches)



—

22

28

13

13

5

MIN.RETURN

AREA (sq in)

SIZE(inches)

30

30 x 16

16 x 103/4

103/4 x 75/8

TYPEHANGER

—

SH

SP

SP

INTERNALYIELD

PRESSURE(psi)

—

5,000

12,000

15,000

TENSIONYIELD


3,800

3,300

1,700

1,200

MAX.OD

(inches)

—

27.530

14.500

9.500


—

30" x 1" Wall Pipe

16" x 109 lb/ft. Csg.

10 3/4" x 60.7 lb/ft. Csg.

MIN. ID(inches)

26.470

14.990

9.928

6.802

MAX.BIT

SIZE(inches)

26

143/4

97/8

63/4



MIN.RETURN

AREA (sq in)

—

48

12

6

www.dril-quip.com

SS-15® BigBore™ IISubsea Wellhead System

www.dril-quip.com

Setting a Global Standard

WORLDWIDE SALES & SERVICE

072214T © 2014 Dril-Quip, inc. Printed in the USA

DRIL-QUIP WESTERN HEMISPHERE DRIL-QUIP, INC. World Headquarters6401 North Eldridge Pkwy.Houston, Texas 77041Tel (713) 939 7711Fax (713) 939 8063

DRIL-QUIP do Brasil, LTDA.Macaé, BrazilTel (55) 22 2791 8950Fax (55) 22 2791 8989

DRIL-QUIP New OrleansNew Orleans, LouisianaTel (504) 522 5566Fax (504) 522 4426

DRIL-QUIP ASIA PACIFIC

DRIL-QUIP Asia Paci c Pte. Ltd.No. 80 Tuas West DriveSingapore, 638417Tel (65) 6861 0600Fax (65) 6861 5700DRIL-QUIP ChinaShekou, P. R. ChinaTel (86) 75 5268 97137Fax (86) 75 5268 97134

DRIL-QUIP Oil eld Services(Tianjin) Co., Ltd.Tanggu, Tianjin, P. R. ChinaTel (86) 22 2580 7466Fax (86) 22 2580 7130

DRIL-QUIP MalaysiaKuala Lumpur, MalaysiaTel (60) 3 2168 4308Fax (60) 3 2168 4201

D.Q. Holdings Pty., Ltd.Perth, AustraliaTel (61) 8 9322 8600Fax (61) 8 9322 8500

DRIL-QUIP QatarDoha, QatarTel (974) 44389715Fax (974) 44417041

DRIL-QUIP IndonesiaJakarta, IndonesiaTel (62) 21 720 0612Fax (62) 21 720 1513

DRIL-QUIP Egypt Zahraa El-Maadi, Cairo, EgyptTel (20) 22 753 8809Fax (20) 22 753 8907

Alexandria, EgyptTel (20) 3 450 0507Fax (20) 3 450 0508

DRIL-QUIP Nigeria, Ltd.Port Harcourt, NigeriaTel (234) 84 463866Fax (234) 84 463649

DRIL-QUIP (Ghana) Ltd.Takoradi, GhanaTel: (233) 312 5384

DRIL-QUIP EASTERN HEMISPHERE

DRIL-QUIP (Europe), Ltd.Stoneywood Park, DyceAberdeen, Scotland, UK AB21 7DZTel (44) 1224 727000Fax (44) 1224 727070DRIL-QUIP LondonHigh Wycombe, Bucks, EnglandTel (44) 1494 601086Fax (44) 1494 601094

DRIL-QUIP NorwayStavanger, NorwayTel (47) 51 443700Fax (47) 51 443701

DRIL-QUIP The NetherlandsBeverwijk, The NetherlandsTel (31) 251 22 9250Fax (31) 251 22 0044

DRIL-QUIP DenmarkEsbjerg, DenmarkTel (45) 7518 0944Fax (45) 7518 0640

Setting a Global Standard. MS... · depending on the casing program. • High pressure, high load...

Documents

Transcript of Setting a Global Standard. MS... · depending on the casing program. • High pressure, high load...