Service_Tools_US_08_2004

8/7/2019 Service_Tools_US_08_2004

http://slidepdf.com/reader/full/servicetoolsus082004 1/8

Self Propelled Maintenance ToolsProduct Overview

Super Jack IV

Super Jack II

Multi Handle

Wheel Handle



2

Super Jack IV

Designed specifically for use with the over 300 short

ton haulage trucks, the Super Jack IV, has adapters for

different types of heavy equipment to match either front

or rear lift points. Easily maneuverable by one person, the

Super Jack IV has a safety lock formed by two pawls onthe lift carriage that engages two racks on the jack frame

for a positive mechanical lock.

Note:

The Liebherr Super Jack IV is intended for use inside a

maintenance shop with a smooth, level hard-surfaced

floor. Rough surfaces or grades over 1% may limit

performances or stability.

Multi HandlerLift 120 tons safely and efficiently

SUPER JACK IV

55” (1.40 m)

72 3/4” (1.85 m)

87 1/4” (2.21 m)

36”(0.91 m)

163” (4.14 m)

1 0 1 ” ( 2 . 5

7 m )

1 2 2 3 / 4 ” ( 3 . 1

1 m )

3 7 1

/ 2 ” ( 0 . 9

5 m )

24 1/2”(0.62 m)

SpecificationsRated Lift Capacity 120 short tons/

109 t (240,000 Ibs)

Prime Power Diesel engine

Propulsion Hydraulic motorized wheel

Steering Hydraulic

Retarding Hydrostatic

Hydraulic Power One 4,000 PSI/276 bar rated

axial piston-type pump at

4.5 GPM / 17 l/min

Hydraulic Pressure Settings

1. Main Lift

2. Propel

Raise 4,000 PSI/276 bar

Lower 2,500 PSI/172 bar

2,000 PSI/138 bar

Safety Lock Two pawls on lift carriage

engage two racks on jack

frame for positive mechanical

lock

Weight 19,000 Ibs/8,620 kg

Adapters Available for different types

of heavy equipment, to

match front or rear lift points

on equipment



3

The versatile Liebherr self propelled Super Jack III ha

adapters to lift different types of heavy equipment. Th

Super Jack III provides unequaled stability, through

straight line vertical lift to a mechanically locked position

The superior load distribution and massive constructioof the jack, reduce stress in the lift area. Wheels, powe

steering and a ride on platform save time by allowing on

person to precisely position the all hydraulic jack.

Note:

The Liebherr Super Jack III is intended for use inside a


floor. Rough surfaces or grades over 1% may lim

performances or stability.

Lift 90 tons easier, faster and safer

Super Jack III

SUPER JACK III

7 3 3 / 4 ” ( 1 . 8

7 m )

62 1/4” (1.58 m)

58” (1.47 m)

87 1/4” (2.21 m)

91 3/8” (2.32 m)

1 0 9 3 / 4 ” ( 2 . 7

9 m )

4 8 ” ( 1 . 2

2 m )

F

u l l y E x t e n d e d

12” (0.30 m)Fully Retracted

30 1/4”(0.77 m)

119 7/8” (3.04 m)

SpecificationsRated Lift Capacity 90 short tons/

82 t (180,000 Ibs)

Up to 36”/0,90 m

straight-line vertical lift



for self-propulsion or when

required, the unit can also be

towed

Steering Hydraulic

Hydraulic Power One 4,000 PSI/276 bar rated

axial piston-type pump at

4.5 GPM / 17 l/min

Hydraulic Pressure Settings

1. Main Lift

2. Propel

Raise 4,000 PSI/276 bar

Lower 2,500 PSI/172 bar

2,000 PSI/138 bar

Brake Hydrostatic

Safety Lock Two pawls on lift carriageengage two racks on jack

frame for positive mechanical

lock


Adapters Available for different types

of heavy equipment, to

match front or rear lift points

on equipment



4

Multi HandlerDesigned specifically for lifting and positioning large

components. The Liebherr MH-4500 Multi Handler

is a hydrostatically, self propelled tool for lifting and

positioning of large components during maintenance or

repair. Equipped with a ride-on platform, one person can

easily maneuver the Multi Handler into tight working areas

with the replacement component safely secured.

Precise positioning of components, allows maintenance

or repair assignments to be completed safely and

efficiently reducing non-productive down time.

The Multi Handler features a basic hydraulic control panelfor initial maneuverability that is easy to operate from the

ride-on platform. As an added feature, the remote control

joystick box allows precise positioning of components in

difficult to reach spaces.

Note:

The Liebherr Multi Handler is intended for use inside a


floor. Rough surfaces or grades over 1% may limit

performance or mobility.



6

Liebherr T 282Wheelmotor(REF. Only)

4 9 1 / 4 ” ( 1 . 2

5 m )

129 3/4” (3.30 m)

150 3/4” (3.83 m)

94” (2.39 m)

4.5

4.5

Liebherr T 282Wheelmotor(REF. Only)

Front and RearIndependent SKEW6” (0.15 m)

9.5

9.5

min. 75” (1.91 m)max. 85” (2.16 m)

Front and RearIndependent

Wheel Handler

SpecificationsRated Lift Capacity 44,000 Ibs/19,960 kg



(Two hydraulic motors)

Steering Hydraulic

Brake Hydrostatic




7

Liebherr’s self propelled Wheel Handler handles heavy

components up to 44,000 lbs/19,960 kg for dismounting,

transporting and remounting a variety of heavy

components, including large wheel motors. With front

and rear raise/lower, tilt, rotate and side-shift features the

unit easily aids in installation or removal of wheel motors.

Auxiliary hydraulic power ports and optional attachments

allow the Wheel Handler to be used in handling other

heavy equipment components such as suspensions, and

front wheel assemblies.

The Wheel Handler has been designed to aid in the

installation and or removal of wheel motors used on

diesel electric haulage equipment. The range of motion,

including lift, skew, propel and steering by the use of

joystick controls of this self propelled maintenance tool

allows installation or removal of wheel motors or other

large components to be significantly shortened.

Two different adapters are available for use with the Whee

Handler as optional equipment:

• Front Suspension Module Adapter

• Suspension Removal Tool

The Liebherr Wheel Handler is intended for use inside

maintenance shop with a smooth, level, hard-surface

floor. Rough surfaces or grades over 1% may lim

performance or mobility.



Liebherr Mining Equipment Co.4100 Chestnut Avenue, Newport News, VA 23607, USA (7 57) 2 45 52 51, Fax (7 57) 9 28 87 55www.liebherr.com, E-Mail: [email protected]

Liebherr Maintenance Tools – In use World wide

Service_Tools_US_08_2004

Documents

Transcript of Service_Tools_US_08_2004