Series SC305/SL305 Terminal Blocks
1
Press release November 2014 METZ CONNECT - the “quality leader” is proud to introduce new products as follows: Series SC305/SL305 Terminal Blocks Compact and cost effective with spring clamp compression mount contacts The new SC305 and SL305 series with spring clamp compression mount contacts from METZ CONNECT facilitate a wire-to-board connection without the use of a header. Contact is established directly on the solder pads where a header would traditionally stand, thus allowing designers to use the opposing side of the PCB for components. Lending itself towards product miniaturization, the SC305/SL305 utilizes METZ CONNECT proven Springcon technology for a secure, vibration resistant connection that automatically adjusts to wires ranging in size from 28 to 16 AWG. With a 5mm centerline, solid wires can be directly inserted for a simple, tool-less connection. The SL305 is a direct solder component and the SC305 is a sleek, snap-fit version for traditional wall-plate applications. Advantages: • Connection convenience through push-in technology. • No second component necessary (e.g. pin header or female connector). • Contact is made directly on a pad, avoiding drilling for through-contacts at the PC board. This offers space for additional component placements on the opposite side of the PC board. • The small size of the compression contacts allows for a more compact system design size. • Self-cleaning contacting on the PC board due to the punctual support of the compression- mount contacts. • Simple assembling through the elimination of plug-in and pull-out forces. • Spring contact adapts automatically (maintenance-free). • High retention force of the conductor even under vibrations. • No solder process is necessary for wire-to-board applications. Please contact us at [email protected] or 888-722-5625 Website link: http://www.metz-connect.com/us/spring-clamp-terminal-blocks/compression-mount- contacts For further information METZ CONNECT USA Inc. Marketing Communications Specialist Donna Mears 200 Tornillo Way Tinton Falls, NJ 07712 Ph 732-389-1300 Fax 732-389-9066 www.metz-connect.com [email protected]
-
Upload
metz-connect-usa-inc -
Category
Documents
-
view
40 -
download
0
Transcript of Series SC305/SL305 Terminal Blocks
Press release November 2014
METZ CONNECT - the “quality leader” is proud to introduce new products as follows: Series SC305/SL305 Terminal Blocks Compact and cost effective with spring clamp compression mount contacts
The new SC305 and SL305 series with spring clamp compression mount contacts from METZ CONNECT facilitate a wire-to-board connection without the use of a header. Contact is established directly on the solder pads where a header would traditionally stand, thus allowing designers to use the opposing side of the PCB for components. Lending itself towards product miniaturization, the SC305/SL305 utilizes METZ CONNECT proven Springcon technology for a secure, vibration resistant connection that automatically adjusts to wires ranging in size from 28 to 16 AWG. With a
5mm centerline, solid wires can be directly inserted for a simple, tool-less connection. The SL305 is a direct solder component and the SC305 is a sleek, snap-fit version for traditional wall-plate applications. Advantages:
• Connection convenience through push-in technology. • No second component necessary (e.g. pin header or female connector). • Contact is made directly on a pad, avoiding drilling for through-contacts at the PC board.
This offers space for additional component placements on the opposite side of the PC board. • The small size of the compression contacts allows for a more compact system design size. • Self-cleaning contacting on the PC board due to the punctual support of the compression-
mount contacts. • Simple assembling through the elimination of plug-in and pull-out forces. • Spring contact adapts automatically (maintenance-free). • High retention force of the conductor even under vibrations. • No solder process is necessary for wire-to-board applications.
Please contact us at [email protected] or 888-722-5625 Website link: http://www.metz-connect.com/us/spring-clamp-terminal-blocks/compression-mount-contacts For further information METZ CONNECT USA Inc. Marketing Communications Specialist Donna Mears 200 Tornillo Way Tinton Falls, NJ 07712 Ph 732-389-1300 Fax 732-389-9066 www.metz-connect.com [email protected]
