SERIES K-MD MOR - Marcopumps · 2018. 7. 3. · series k-md mor. ie2 version. technical...
6
FPZ S.p.A. Via F.lli Cervi 16, 20863 Concorezzo (MB), ITALY Tel. +39 039.69.09.811 [email protected] www.fpz.com SERIES K-MD MOR IE2 VERSION TECHNICAL CHARACTERISTICS • Aluminium alloy construction • High efficiency impeller OPTIONS • Special Voltages (IEC 60038) • Surface treatments • Increased seal version LATERAL CHANNEL BLOWERS-EXHAUSTERS Data sheet
Transcript of SERIES K-MD MOR - Marcopumps · 2018. 7. 3. · series k-md mor. ie2 version. technical...
FPZ S .p . A. V ia F . l l i C er v i 1 6 , 20863 Co nc or ez z o (MB ) , ITALY Te l . + 39 039.69 .0 9.81 1 i nfo@ fpz .c om www .fpz .c om
SERIES K-MD MOR
IE2 VERSION TECHNICAL CHARACTERISTICS
• Aluminium alloy construction • High efficiency impeller
OPTIONS
• Special Voltages (IEC 60038) • Surface treatments • Increased seal version
LATE
RAL
CHA
NN
EL B
LOW
ERS-
EXHA
UST
ERS
Dat
a sh
eet
SERIES MD – RANGE MOR
IE2 VERSION
Pg 2
PRESSURE12
Model N
2900 rpm [kW]
N 3500 rpm
[kW]
Q max 2900 rpm
[m³/h]
Q max 3500 rpm
[m³/h]
ΔP max 2900 rpm [hPa] (mbar)
ΔP max 3500 rpm [hPa] (mbar)
Leq¹ 2900 rpm
(Lp) [dB(A)]
Leq¹ 3500 rpm
(Lp) [dB(A)]
Weight² max [kg]
K07R-MD 4 4,6 181 219 550 500 71 73 59
5,5 6,3 181 219 650 650 71,5 73,5 71
K08R-MD 4 4,6 236 285 375 300 72,7 74,7 61
5,5 6,3 236 285 550 425 73,1 75,1 73 7,5 8,6 236 285 600 625 73,5 75,5 82
K09-MD 5,5 6,3 311 375 425 350 74,5 76,5 85 7,5 8,6 311 375 625 550 76 78 93 9,2 10,6 311 375 660 650 76,4 78,4 102
K10-MD 7,5 8,6 387 467 475 425 76,8 78,8 95 9,2 10,6 387 467 625 525 77,2 79,2 104 11 12,6 387 467 700 675 77,9 79,9 127
K11-MD
7,5 8,6 431 520 375 320 77,6 79,6 108 9,2 10,6 431 520 525 425 77,9 79,9 116 11 12,6 431 520 650 550 78,2 80,2 139 15 17,2 431 520 725 750 78,5 80,5 156
K12-MD
7,5 8,6 473 570 225 - 78,5 - 112 9,2 10,6 473 570 350 200 78,8 80,8 120 11 12,6 473 570 450 300 79,1 81,1 143 15 17,2 473 570 650 550 79,4 81,4 160
VACUUM
Model N
2900 rpm [kW]
N 3500 rpm
[kW]
Q max 2900 rpm
[m³/h]
Q max 3500 rpm
[m³/h]
ΔP max 2900 rpm [hPa] (mbar)
ΔP max 3500 rpm [hPa] (mbar)
Leq¹ 2900 rpm
(Lp) [dB(A)]
Leq¹ 3500 rpm
(Lp) [dB(A)]
Weight² max [kg]
K07R-MD 4 4,6 181 219 450 450 70 72 59
5,5 6,3 181 219 - - - - 71
K08R-MD 4 4,6 236 285 375 300 72,2 74,2 61
5,5 6,3 236 285 450 425 72,6 74,6 73 7,5 8,6 236 285 - - - - 82
K09-MD 5,5 6,3 311 375 425 350 74 76 85 7,5 8,6 311 375 475 475 75,5 77,5 93 9,2 10,6 311 375 - - - - 102
K10-MD 7,5 8,6 387 467 450 400 77,2 79,2 95 9,2 10,6 387 467 - - - - 104 11 12,6 387 467 - - - - 127
K11-MD
7,5 8,6 431 520 375 320 77,2 79,2 108 9,2 10,6 431 520 450 425 77,5 79,5 116 11 12,6 431 520 - - - - 139 15 17,2 431 520 - - - - 156
K12-MD
7,5 8,6 473 570 225 - 78,1 - 112 9,2 10,6 473 570 350 200 78,4 80,4 120 11 12,6 473 570 425 300 78,4 80,4 143 15 17,2 473 570 - - - - 160
ELECTRIC MOTOR IE2: tree-phase only, from 0.75 kW INSTALLATION • For proper use, the blower should be equipped with INLET FILTER and Flow Relief VALVE; other accessories available on
request. • Ambient temperature from -15° to +40°C (+5° to +104° F). • Specifications subject to change without notice. • Before installation read carefully all instructions.
1 Noise measured at 1 m distance with inlet and outlet ports piped, in accordance to ISO 3744. 2 Value refers to the weight of the machine with 3 Phase motor if MOR range, without motor if GOR or GVR range. N: Installed motor power Q: Flow rate ΔP: Differential pressure Leq: Noise level
SERIES MD – RANGE MOR
IE2 VERSION
Pg 3
PRESSURE345
2900 rpm (50 Hz) 3500 rpm (60 Hz)
Curves refer to air at 20°C (68° F) temperature and 1013 mbar (29.92 In Hg) atmospheric pressure (abs) measured at inlet port. Values for flow, power consumption and temperature rise: ±10% tolerance. Data can change without prior notice.
FLO
W R
ATE
ABS
ORB
ED P
OW
ER
TEM
PERA
TURE
INCR
EASE
SERIES MD – RANGE MOR
IE2 VERSION
Pg 4
VACUUM678
2900 rpm (50 Hz) 3500 rpm (60 Hz)
Curves refer to air at 20°C (68° F) temperature, measured at inlet port and 1013 mbar (29.92 In Hg) atmospheric backpressure (abs). Values for flow, power consumption and temperature rise: ± 10% tolerance. Data can change without prior notice.
FLO
W R
ATE
ABS
ORB
ED P
OW
ER
TEM
PERA
TURE
INCR
EASE
SERIES MD – RANGE MOR
IE2 VERSION
Pg 5
DIMENSIONS (K07R-MD/K08R-MD/K09-MD/K10-MD/K11-MD/K12-MD)
Dimensions in mm - FOR REFERENCE ONLY
Model a b c d e f G
K07R-MD 424 481 269 82 468 438 G 2"
K08R-MD 457 498 269 82 478 448 G 2"
K09-MD 492 561 315 96 508 478 G 4"
K10-MD 516 573 315 96 508 478 G 4"
K11-MD 542 603 332 91 538 508 G 4"
K12-MD 548 606 332 91 538 508 G 4"
Model H i m n p1 o
K07R-MD 470 155 13 300 418 350
K08R-MD 470 155 13 300 418 350
K09-MD 490 182 13 300 644 350
K10-MD 600 182 13 300 644 350
K11-MD 605 200 13 300 654 350
K12-MD 610 200 13 300 657 350
Model q r s t u z
K07R-MD 18 43 5 M8 295 16
K08R-MD 18 43 5 M8 310 16
K09-MD 25 257 5 M8 360 16
K10-MD 25 257 5 M8 360 16
K11-MD 25 262 5 M8 390 16
K12-MD 25 262 5 M8 390 13
ottobre ’13
FPZ Espana/Portugal Pral, Barcelona Espana [email protected] HEADQUARTERS
FPZ S.p.A. Concorezzo (MB) Italy [email protected]
FPZ France S.a.r.l. St. Priest France [email protected]
FPZ, Inc Soukville, Wisconsin USA [email protected]
FPZ Austria & Germany Krems Austria [email protected]
FPZ UK Andover, Hampshire United Kingdom [email protected]
FPZ México/LA Zapopan, Jalisco México [email protected]
