SERIES HEAVY-DUTY MODELS · PDF fileIDC 8500 / 8700 Series heavy-duty narrow stile Panic and...

West: 800-544-4422 • East: 800-225-6737 www.intldoorclosers.comCOPYRIGHT 2017 INTERNATIONAL DOOR CLOSERS, INC

International Door Closers, Inc.

13

8000 SERIES

FEATURES

GRADE 1 • ARCHITECTURAL TYPE • EXIT DEVICES

• All devices are non-handed design

• Slight pressure on device touch bar will retract latch(s) for immediate exit

• Auxiliary guarded latch deadlocks latch bolt automatically when door is closed

• High shock-resistant latching mechanical design for protection from vandalism

• All inside components are made of high rust-resistant alloy or heavily electroplated steel

• Anti-fading, electroplated or architectural base material finishes on all exposed surfaces are available

• With a dogging mechanism, users have a choice of hex-key or cylinder operated for positive push-pull action at peak traffic time. This dogging device will also help by increasing the life of the exit device (panic label only).

SERIES HEAVY-DUTY MODELS

IDC 8000 Series Exit Devices are heavy duty and designed for heavy traffic applications. The devices are Underwriters Laboratory (UL, USA and ULC, Canada) listed for Panic Exit Hardware or Fire Exit Hardware, and are certified to ANSI A156.3-2001 Grade 1.

Rim Exit Device

Mortise Exit Device

Alarm Exit Device

Surface Exit Device



The IDC 8000 Series is a heavy-duty push bar exit device which has two external surface styles: Smooth Device Body and Grooved Device Body. The 8500 and 8600 Series are smooth device body. The 8700 and 8800 Series are grooved device body. These two styles provide a wide selection of style options for architects and building owners.

14

8500 SERIES (Narrow Stile) Smooth device body

8700 SERIES (Narrow Stile) Grooved device body

8600 SERIES (Wide Stile) Smooth device body

8800 SERIES (Wide Stile) Grooved device body



MODEL 8510S/8710S NARROW PANIC-RATED RIM EXIT DEVICE MODEL 8510F/8710F NARROW FIRE-RATED RIM EXIT DEVICE

• UL/cUL Listed: UL listed as Panic Exit Hardware or 3-hour Fire Exit Hardware

• ANSI Certified: Devices are ANSI A156.3 – 2001 Grade 1

• 8510S / 8710S narrow design rim exit devices are used for aluminum style full glass doors or narrow stile aluminum door applications. 8510F / 8710F narrow design rim exit devices are used for narrow or wide stile single doors up to 4’ x 8’ (1219mm x 2438mm) or 8’ x 8’ (2438mm x 2438mm) double metal or wood doors with mullion.

• The exit devices are available in the following finishes: US3, US4, US10, US10B, US26, US26D and US32D.

SpecificationsCertification

Application

Device Lengths • Standard (36”): 33-15/32” (850mm)

• Long (48”): 44-3/4” (1137mm)

Door Widths • 36” - For 29” to 36” (736mm to 914mm) doors

• 48” - For 33” to 48” (838mm to 1219mm) doors

Minimum Stile Width 2-19/32“ (66mm)

Latch Bolt 3/4” (19mm) throw, deadlocking design

Strikes 801 (panic), 802 (fire)

Doggin Kit • Panic device - Hex key dogging (RD) standard

• Fire device - No mechanical dogging (ND)

Dogging Options • Cylinder Dogging (CD)• Less Dogging (LD)

Mounting Fasteners • Panic device - Machine screws furnished standard

• Fire device - Sex nuts and bolts (SNB) supplied standard

• Optional SNB are available for device, order separately

Mounting Height Device center line from finished floor is 40” (1016mm) standard

Door Opening Height Device centerline from finished floor is 40“ (1016mm) standard

Projection Pushbar Neutral: 3-1/16” (78mm), Pushbar Depressed: 2-19/32” (66mm)

Narrow Design Rim Exit Devices

IDC 8500 / 8700 Series heavy-duty narrow stile Panic and Fire-Rated Hardware are designed for contemporary glass, aluminum, wood and metal doors.

NARROW STILE EXIT DEVICES

15



• UL/cUL Listed: Panic Exit Hardware or 3-hour Fire Exit Hardware


• Narrow design Panic SVR exit devices are used for aluminum frame full glass doors or narrow stile aluminum door applications. The narrow design Fire SVR exit devices are use for wide stile pairs of metal or wood doors up to 8’ x 8’ (2438mm x 2438mm).


Specifications

Certification

Application


• Long (48”): 44-3/4” (1137mm)



Minimum Stile Width 2-19/32”(66mm)

Latch Bolt • Top latch - 5/8” (16mm) throw, can be deadlocked automatically

• Bottom latch - 5/8” (16mm) throw, held retracted during door swing

Strikes • Top: 812 (Panic), 822 (Fire). • Bottom: 815 (Panic), 825 (Fire)




Mounting Fasteners • Panic device - Machine screws furnished for device standard SNB furnished for top & bottom latches

• Fire device - Sex nuts and bolts (SNB) supplied standard SNB are required for wood doors, supplied standard

Mounting Height Device centerline from finished floor is 40” (1016mm) standard

Door Opening Height Standard door height is 7’ (Optional 8’ door is available)

Vertical Rods • 1/2” (13mm) diameter tubular with rod guides

• Top rod has two pieces to connect for accommodating 7’ or 8’ doors

• Bottom rod is one piece with a length of 31-1/4” (794mm)

Projection Pushbar Neutral: 3-1/16” (78mm) and Pushbar Depressed: 2-19/32” (66mm)

Narrow Design Rim Exit DevicesMODEL 8530S/8730S NARROW DESIGN PANIC-RATED RIM EXIT DEVICE MODEL 8530F/8730F NARROW DESIGN FIRE-RATED RIM EXIT DEVICE

16





• Narrow design Panic CVR exit devices are used for the aluminum frame full glass doors or narrow stile aluminum door applications. The narrow design Fire CVR exit devices are used with wide stile pairs of steel doors up to 8’ x 8’ (2438mm x 2438mm).


Specifications

Certification

Application


• Long (48”): 44-3/4” (1137mm)



Minimum Stile Width 2-19/32“ (66mm)







Mounting Fasteners • Panic device - Machine screws furnished for device standard SNB furnished for top & bottom latches




Vertical Rods • 1/2” (13mm) diameter tubular with rod guides

• Top rod has two pieces to connect for accommodating 7’ or 8’ doors


Projection Pushbar Neutral: 3-1/16” (78mm) and Pushbar Depressed: 2-19/32” (66mm)

Narrow Design Concealed Vertical RodMODEL 8550S/8750S NARROW DESIGN PANIC-RATED RIM CVR EXIT DEVICE MODEL 8550F/8750F NARROW DESIGN FIRE-RATED RIM CVR EXIT DEVICE

17



MODEL 8610S/8810S PANIC-RATED RIM EXIT DEVICE MODEL 8610F/8810F FIRE-RATED RIM EXIT DEVICE

• UL/cUL Listed: UL listed as Panic Exit Hardware or 3-hour Fire Exit Hardware


• 8610S/8810S rim exit devices are used for all types of single double doors with mullion.

• 8610F/8810F rim exit devises are used for UL listed fire labeled single doors up to 4’ x 8’ (1219mm x 2438mm) or 8’ x 8’ (2438mm x 2438mm) double doors with mullion.


SpecificationsCertification

Application


• Long (48”): 44-3/4” (1137mm)



Minimum Stile Width 4-1/4” (107mm)

Latch Bolt 3/4” (19mm) throw, deadlocking design

Strikes 801 (panic), 802 (fire)






• SNB are required to use for wood doors, supplied standard



Rim Exit Devices

The IDC 8600 and 8800 Series have a full line of heavy-duty wide stile Panic and Fire-rated Hardware. This series offer durability, safety and meet the security demand and access control needs of today.

18

• MODEL 8610S/8810S PANIC-RATED RIM EXIT DEVICE

• MODEL 8610F/8810F FIRE-RATED RIM EXIT DEVICE



MODEL 8620S/8820S PANIC-RATED MORTISE EXIT DEVICE MODEL 8620F/8820F FIRE-RATED MORTISE EXIT DEVICE



• 8620S/8820S mortise lock exit devices are used for all types of single double doors with mullion.

• 86210F/8820F mortise lock exit devises are used for UL listed fire labeled single doors up to 4’ x 8’ (1219mm x 2438mm) or 8’ x 8’ (2438mm x 2438mm) double doors installations.


Specifications

Certification

Application


• Long (48”): 44-3/4” (1137mm)




Latch Bolt Stainless steel two-piece mechanical 3/4” (19mm) with anti-friction inserted auxiliary deadlocking latch

Strikes Universal curved lip, non-handed, 818 (panic), 828 (fire). Optional 831(panic) or 832 (fire) flat ANSI Strike for door pairs with overlapping astragal(7/8” lip)






• SNB are required to use for wood doors, supplied standard

Electric Strikes Compatible with Von Duprin 6000 Series Electric Strikesor Folger Adam 300, 500, 600, or 700 Series Strikes



Mortise Lock Exit Devices

How to Order When ordering a Mortise Lock Exit Device,choose a model of trim together; and specify the lever design and finish. Example:

• 8820S-36-88E01A-RC-626

• 8820F-48-89E17A-NC-63

19



MODEL 8630S/8830S PANIC-RATED SVR EXIT DEVICE MODEL 8630F/8830F FIRE-RATED SVR EXIT DEVICE



• Panic SVR exit devices are used for all types of single and double doors. Fire SVR exit devices are used for UL listed fire labeled pairs of doors up to 8’ x 8’ (2438mm x 2438mm)

• Available finishes: US3, US4, US10, US10B, US26, US26D and US32D

• For LBR device

Specifications

Certification

Application


• Long (48”): 44-3/4” (1137mm)










Mounting Fasteners • Panic device - Machine screws furnished for device standard SNB furnished for top and bottom latches




Vertical Rods • 1/2” (13mm) diameter tubular with rod guides Top rod has two pieces to connect for accommodating 7’ or 8’ doors.



Surface Vertical Rod Exit Devices

Above models are not available for 9’ or 10’door height use. If doors are over 8’ please specify when ordering. Example:

• Model 10FT-8630S / 10FT-8830S

• Model 10FT-8630F / 10FT-8830F

20



MODEL LBR8630S/LBR8830S PANIC-RATED SVR EXIT DEVICE LESS BOTTOM ROD MODEL LBR8630F/LBR8830F FIRE-RATED SVR EXIT DEVICE LESS BOTTOM ROD



• Panic SVR exit devices are used for all types of single and double doors. Fire SVR exit devices are used for UL listed fire labeled pairs of doors up to 8’ x 8’ (2438mm x 2438mm)

• Available finishes: US3, US4, US10, US10B, US26, US26D and US32D

• For LBR device

Specifications

Certification

Application


• Long (48”): 44-3/4” (1137mm)

















Less Bottom Rod Surface Vertical Rod Exit Devices


• Model 10FT-8630S / 10FT-8830S

• Model 10FT-8630F / 10FT-8830F

21



MODEL 8650S/8850S PANIC-RATED CVR EXIT DEVICE

MODEL 8650F/8850F FIRE-RATED CVR EXIT DEVICE



• Panic CVR exit devices are used on single or double metal doors. Fire CVR exit devices are used for UL listed fire labeled pairs of steel doors up to 8’ x 8’ (2438mm x 2438mm).


• CVR models can not be installed without bottom rod (LBR), only Surface (SVR) models can only be installed less bottom rod.

Specifications

Certification

Application


• Long (48”): 44-3/4” (1137mm)

















Concealed Vertical Rod Exit Devices


• Model 10FT-8650S / 10FT-8850S

• Model 10FT-8650F / 10FT-8850F

22



ALARM EXIT DEVICE

DELAYED EGRESS EXIT DEVICE

EMERGENCY EXIT ONLYPUSH UNTIL ALARM SOUND

DOOR AN BE OPEND IN 15 SECONDS

All IDC 8000 series exit devices can be converted into alarm devices. Its feature is used to deter and signalthe unauthorized use of a door opening. The push bar is printed with “EMERGENCY EXIT ONLY, PUSH TOOPEN ALARM WILL SOUND” in red lettering.

The alarm exit device is operated by a 9 volt battery and has two alarm modes:

• Type A - Monitors push bar When the push bar is depressed, the alarm will sound. This type is suitable for exit device without outsidelever trim (for exit only).

• Type B - Monitors push bar and latch bolt When the push bar is depressed or the latch bolt is retracted by operating the outside lever trim, the alarmwill sound.Model numbers for orderingPrefix “AL” on any on 8000 series model number and suffix: “A” or “B”, then add the device length for 36” and48” door sizes, then the finish code.

FOR EXAMPLE:

• AL8810SA - 36 - 630 (i.e. Panic-Rated Rim Exit Device + Type A alarm, 36”, 630)

• AL8830SB - 48 - 626 (i.e. Panic -Rated SVR Exit Device + Type B alarm, 48”, 626)

• When panic-rated exit devices are converted to an alarm exit device, the dogging function is not available.

The delayed egress exit device can provide a controlled egress for opening. When the exit device is in the arming stage, it will deny exit to unauthorized persons for 15 - 30 seconds. If depressed for 3 secondsor longer, the device will sound a local and a remote audible alarm. The remote monitor signal will alertthe security personnel.The delayed egress device is furnished with a sticker in red letters which states:

When the exit device is in the arming mode, turning the key clockwise to the bypass position will allow authorized personnel to exit for maintenance or egress without sounding the alarm. If the exit device is in the arming mode, turn the key switch counterclockwise to the reset position and it will release the device without sounding the alarm for egress and will rearm after 10 seconds.

• Device is ANSI A156.3 Grade 1 and ANSI A156.24.

Electrified Exit Devices ALARM EXIT DEVICE

23



MODEL 88L AND 88E SERIES ESCUTCHEON LEVERS (SQUARE DESIGN)

1. Non handed, easily installed with exit device.

2. Easy operating lever handle allows convenient one hand operation.

3. Available finishes: US3, US4, US10, US10B, US26, US26B, US28 and US32D

4. Trim has 4 through-bolts to the device chassis directly for better security and durability. It fits 1-3/4” (44) door standard. For 2” (51mm), 2-1/4” (57mm) thick door or the shim-mounted exit device, specify the door thickness when ordering.

5. 88L Series Escutcheons are forged bronze and the levers are zinc alloy castings.

6. Anti-Vandalism design prevents the lock from being damaged when a key locks the lever.

• When there is a key requirement, the trims may receive cylinders from other manufacturers.

• Cylinder is not furnished standard. Specify cylinder type (RC-Regular Cylinder, NC-No Cylinder) when the cylinder is required.

FEATURES:

Models and Functions:

Optional Lever Design

88L 01A #01 Lever

88L 05A #05 Lever

88L 17A #17 Lever

Mortis Cylinder 526

Rim Cylinder 426

Cylinder SelectionThe cylinder has two types as shown below.

DEVICE OUTSIDE TRIM

Operation Options Key Locks & Unlocks Lever

Lever Always Active (No Cylinder)

Key Retracts Latch Bolt (Rigid Lever)

Pull when Dogged (Rigid Lever)

Function Classroom Passage Night Latch Dummy

Trim DesignationCylinder Escutcheon

LeverBlank Escutcheon Lever Night Escutcheon Lever

Dummy Escutcheon Lever

Model Number and Use

88L01A 88L01B 88L01C 88L01D

For Rim, Surface / Concealed Vertical Rod, LBR Exit Devices Use:

88E01A 88E01B 88E01C 88E01D

For Mortise Lock Exit Devices Use Only

Escutcheon Plate Size 9 7/16” x 2 15/16” x 13/16” (240mm x 75mm x 21mm)

ANSI Function 08 14 03 02

Cylinder Type 1/4” Mortise – Rim –

24



MODEL 89L AND 89E SERIES ESCUTCHEON LEVERS

1. Non-handed easy installation

2. Easy operating lever handle allows convenient one hand operation.

3. Available finishes: US3, US4, US10, US10B, US26, US26B, US28 and US32D

4. Trim has 4 through-bolts to the device chassis directly for better security and durability. It fits 1-3/4” (44) door standard. For 2” (51mm), 2-1/4” (57mm) thick door or the shim-mounted exit device, specify the door thickness when ordering.

5. Clutch freewheeling design. The lever rotates when the door is locked, preventing excessive force from being applied to the horizontal lever.

• In order to meet key requirements, the trims may receive cylinders from other manufacturers.

• Cylinder is not furnished standard. Specify cylinder type (RC - Regular Cylinder, IC - Interchangeable Core, NC - No Cylinder) when the cylinder is required.

• The 88E or 89E Series trims, which are used for mortise lock exit devices only, are not available to be ordered individually. Any one trim must be packed together with a mortise lock exit device when ordered.

FEATURES:


Ordering Information:

DEVICE OUTSIDE TRIM

Operation Options Key Locks & Unlocks Lever


Key Retracts Latch Bolt (Rigid Lever)

Pull when Dogged (Rigid Lever)


Trim DesignationCylinder Escutcheon

LeverBlank Escutcheon Lever Night Escutcheon Lever

Dummy Escutcheon Lever


89L01A 89L01B 89L01C 89L01D

For Rim, Surface / Concealed Vertical Rod, LBR Exit Devices Use:

89E01A 89E01B 89E01C 89E01D





Device model No.

Device lenth

Trim model No.

BHMA finish code

Function code:A - ClassroomB - PassageC - StoreroomD - Dummy

Cylinder type

Function code

Lever design

8820S–36–89E–17–A–RC–626

25



MODEL 87P AND 87E SERIES PULL PLATES – FOR WIDE STILE EXIT DEVICE USE

1. Non-handed, easily installed with exit device.

2. Available finishes: US3, US4, US10, US10B, US26, US26D, US28 and US32D.

3. Trim has through-bolts to the device chassis for more security and durability. This product fits 1-3/4” (44mm) doors standard. For 2” (51mm) or 2-1/4” (57mm) thick door or the shim-mounted exit device, specify the door thickness when ordering.


• Cylinder is not furnished standard. Specify cylinder type (RC-Regular Cylinder, IC- Interchageable Core, NC-No Cylinder) when a cylinder is required.

• The 87E Series trims that are used for mortise lock exit devices, are not available to be ordered individually. When ordering any one trim, it must be packed together with a mortise lock exit device.

• To order the 87P Series Trims: Specify model series number, lever design number, fuction code (A, B, C, D), cylinder type and BHMA finish code. EXAMPLE: 87P-6A-RC-626

FEATURES:


To order the 87E Series Trims with mortise lock device, please specify in the following format:

DEVICE OUTSIDE TRIM

Operation Options Key Locks & Unlocks Thumbpiece


Key Retracts Latch Bolt Pull when Dogged


Trim DesignationCylinder Pull Plate with Thumbpiece

Blank Pull Plate with Thumbpiece

Cylinder Pull Plate Dummy Pull Plate


87P-5A 87P-5B 87P-5C 87P-5D

For Rim, Surface Vertical Rod Type, and LBR Type Exit Devices Use

87P-6A 87P-6B 87P-6C 87P-6D

Concealed Vertical Rod Type Exit Devices Use

87E-4A 87E-4B 87E-4C 87E-4D


Escutcheon Plate Size 14 11/16” x 3” x 3/32” (373mm x 76mm x 2mm)



Device model No.

Device lenth

Trim model No.

BHMA finish code


Cylinder type

Function code

8820S–36–87E–4A–RC–626

26



MODEL86P AND 86E SERIES PULL PLATES – FOR WIDE STILE EXIT DEVICE USE




• To meet key requirements, the tirms may receive cylinders from other manufacturers.

• Cylinder is not furnished standard. Specify cylinder type: (RC-Regular Cylinder, IC-Interchangeable Core, NC- No Cylinder) when a cylinder is required.

• The 86E Series trims, which are used for mortise lock exit devices only, are not available to be ordered individually. When ordering any one trim it must be packed together with a mortise lock exit device.

• To order the 86P Series Trims: Specify model series number, lever design number, fuction code (A, B, C, D), cylinder type and BHMAfinish code. EXAMPLE: 86P-5A-RC-626

FEATURES:


To order the 86E Series Trims with mortise lock device, please specify in the following format:

DEVICE OUTSIDE TRIM









86P-5A 86P-5B 86P-5C 86P-5D

For Rim, Surface Vertical Rod Type, and LBR Type Exit Devices Use

86P-6A 86P-6B 86P-6C 86P-6D


86E-4A 86E-4B 86E-4C 86E-4D


Escutcheon Plate Size 13 31/32” x 3” x 3/32” (355mm x 76mm x 2mm)



Device model No.

Device lenth

Trim model No.

BHMA finish code


Cylinder type

Function code

8820S–36–86E–4A–RC–626

27



MODEL85P SERIES PULL PLATES – FOR NARROW STILE EXIT DEVICE USE




• To meet key requirements, the tirms may receive cylinders from other manufacturers.

• Cylinder is not furnished standard. Specify cylinder type: (RC-Regular Cylinder, IC-Interchangeable Core, NC- No Cylinder) when a cylinder is required.

• The 86E Series trims, which are used for mortise lock exit devices only, are not available to be ordered individually. When ordering any one trim it must be packed together with a mortise lock exit device.

• To order the 85P Series Trims: Specify model series number, lever design number, fuction code (A, B, C, D), cylinder type and BHMAfinish code. EXAMPLE: 85P-3A-RC-626

FEATURES:


DEVICE OUTSIDE TRIM









85P-3A 85P-3B 85P-3C 85P-3D

For Rim, Surface Vertical Rod Type Exit Devices Use

85P-4A 85P-4B 85P-4C 85P-4D





28



MODEL84P SERIES PULL PLATES – FOR NARROW STILE EXIT DEVICE USE





• Cylinder is not furnished standard. Specify cylinder type (RC-Regular Cylinder, IC- Interchageable Core, NC-No Cylinder) when a cylinder is required.

• To order the 84P Series Trims: Specify model No., lever design No., function code (A, B, C, D), cylinder type and BHMA finish code: EXAMPLE: 84P-3A-RC-626

FEATURES:


DEVICE OUTSIDE TRIM









84P-3A 84P-3B 84P-3C 84P-3D

For Rim, Surface Vertical Rod Type Exit Devices Use

84P-4A 84P-4B 84P-4C 84P-4D





29



KEYED REMOVABLE MULLIONS

NON-FIRE RATED KEYED REMOVABLE MULLION, MODEL 7100

The IDC 7000 Series Keyed Removeable Mullions are for use with the 5000 & 6000 Series Rim Exit devices on non-fire or fire rated pairs of doors. They are designed for faster and easy removalof the top bracket by a simple operation of the rim cylinder when a clear, unobstructed large opening is required. Once the mullion is removed, the cart, gurneys, large machine, forklift or furniture can freely pass through the opening. When the mullion is reinstalled, the unit will self lock in place without the use of the cylinder key.

Each keyed removable mullion set includes the top and bottom bracket set, mullion tube and shims.The rim cylinder is included. Mullion is fire rated and certified by UL.

For use with Panic-Rated Rim Exit Devices on non-fire rated pairs of doors

AUXILIARY HARDWARE

Specifications

Mullion Tube 2” (51mm) wide x 3” (76mm) deep, Wall thickness 1/8” (3mm) and 11 gauge steel tube

Mullion Size • 7” (2134mm), 8’ (2438mm) or 10’ (3048mm) three (3) sizes. • Mullion may be field cut to fit proper size

Rim Cylinder Use a 1-1/4” solid brass 6-pin rim cylinder, model 426, or interchangeable core, model 308 is sold separately

Top Bracket • Steel, using key allows the mullion to be removed in seconds • Mullion can be locked in the top bracket easily without using the key

Bottom Bracket Steel, fixed by (4) hex bolts with nonferrous anchors

Shims 1/2” (13mm) and 5/8” (16mm) shims included

Fasteners Each Mullion includes:• 2 Flat head machine screws, #5/16-18 x 1-1/2”, Stainless steel• 4 Flat head machine screws, #5/16-18 x 5/8”, Stainless steel• 4 Flat head machine screws, #5/16-18 x 1-1/4”, Stainless steel• 4 Expansion Anchors, 1/2” dia. x 1-1/2” long, steel

Strikes Use two (2)standard Rim Strikes (801), not included

Finish Gray baked powder coating only

FIRE-RATED KEYED REMOVABLE MULLION, MODEL 7200For use with Fire-Rated Rim Exit Devices on fire-rated pairs of doors

Specifications

Mullion Tube 2” (51mm) wide x 3” (76mm) deep, Wall thickness 1/8” (3mm) and 11 gauge steel tube

Mullion Size • 7” (2134mm), 8’ (2438mm).• Mullion is fire rated and may be field cut to fit proper size

Rim Cylinder Use a 1-1/4” solid brass 6-pin rim cylinder, model 426, or interchangeable core, model 308 is sold separately

Top Bracket Stainless steel, the key allows the mullion to be removed in seconds and the mullion can be locked in the top bracket without using the key

Bottom Bracket Stainless steel, fixed by (4) hex bolts with stainless steel anchors

Shims 1/2” (13mm) and 5/8” (16mm) shims included

Fasteners Each Mullion includes:• 2 Flat head machine screws, #5/16-18 x 1-1/2”, Stainless steel• 4 Flat head machine screws, #5/16-18 x 5/8”, Stainless steel• 4 Flat head machine screws, #5/16-18 x 1-1/4”, Stainless steel• 4 Expansion Anchors, 1/2” dia. x 1-1/2” long, steel

Strikes Use (2) sets of Mullion Strikes (688) & Strike Hooks (689), sold separately

Finish Gray baked powder coating only

30



FIRE LATCH BOLT, MODEL FLOOR

DOGGING OPTIONS

CYLINDER OPTIONS

Fire latch bolt is used with a pair of UL listed fire rated LBR exit devices, it includes a spring and stainless steel bolt which installs in the lower door edge inside to replace the bottom vertical rods of two SVR exit devices on a double door. This UL listed fire latch bolt is a temperature-actuated bolt that is designed to release from one door leaf and engage the other door when the temperature exceeds the rating of the fusible link during a fire. When the fire latch bolt releases and connects with the opposite door leaf, it keeps the doors in alignment and closed during a fire.

Less Dogging is available on all 5000 Series Panic Exit Devices when users want to remove the dogging option.

Cylinder Dogging is available on all 5000 Series Panic Exit Devices to replace the standard hex key dogging. Unit requires a standard 1-1/4” (32mm) mortise cylinder with a straight cam.

Cylinders are not furnished with device or trim and must be specified when required. Refer to the trim pages for cylinder type.

• UL listed, furnished with LBR device

• Faceplate: 1-25/32” x 1” (45mm x25.6

• Bolt diameter: 27/32” (21.6mm)

• Length of Latch Bolt: 3-5/32” (80mm)

• Materia: 100% stainless steel

Specifications

Less Dogging (LD)

Cylinder Dogging (CD)

ACCESSORIES

Mortise Cylinder Rim Cylinder

Regular Type

Interchangeable Core Type

526 426

208 308

31

SERIES HEAVY-DUTY MODELS · PDF fileIDC 8500 / 8700 Series heavy-duty narrow stile Panic and...

Documents

Transcript of SERIES HEAVY-DUTY MODELS · PDF fileIDC 8500 / 8700 Series heavy-duty narrow stile Panic and...