SERIES 6SQSCALCDB79V Sloped Ceiling · All Pathwa® products meet or exceed requirements as...

All Pathway® products meet or exceed requirements as established by the National Electrical Code. Specifications subject to change without notice. Alzak® is a registered trademark of Alcoa.

Manufactured and tested to UL#2108 and CSA standards. Note: Suitable for damp location.Fixtures are not designed for direct contact with insulation.

Fixture: Type:

Project:

Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591voice 800.342.0592 • fax 800.207.0090 • www.pathwaylighting.com • e-mail: [email protected]

SERIES 6SQSCALCDB79V Sloped Ceiling Low Voltage Sq, Aperture LED Fixture for Remote Driver, 925-4569L

LCD8.0CECEUA

10 Year Warranty

Catalog #:6SQSCALCDB79V 6SQSCA

Example: 6SQSCASCLPFExample: 6SQSCALCDB79VA4KN

6.00" x 6.00"

8.55"8.93"

19.02"7.31" x 7.31"

Rough Opening 6.75" x 6.75"

APPLICATIONLow voltage LED lighting fixtures using remote driver platforms are ideally suited to applications that require easy access to LED drivers for routine maintenance and improved LED life and reliability. Remote driver platforms are especially useful in hard to access ceilings and where historical or important architectural features cannot be disturbed after lighting fixtures are installed.

PRODUCT DATAREFLECTOR: Dual-optic system includes upper cone which determines the beam distribution and lower angled reflector to finish the ceiling without glare. Upper reflector and LED engine are mounted to a single axis adjustable chassis that tilts up to 38º to accommodate sloped ceilings. Standard finish is soft clear Alzak with matching polished flange. Other custom color reflectors are available. Consult factory.HOUSING: Heavy-gauge steel housing provides a secure mounting platform for the electrical components and protects the optical assembly. Standard plaster flange allows one-inch ceiling thickness. LED components are accessible from below.MOUNTING: Universal Mounting brackets adjust vertically and accept L-BAR interlocking, expandable c-channel hanger bars which are supplied standard. L-BARS are suitable for T-bar, wood joist and metal joist ceiling styles. Additional features on last page.ELECTRICAL: Fixture designed to be used with remote low voltage power distribution systems. Includes a quick connect power connector and thermal protection module. See table for wattages and delivered lumens at various drive currents.LED MODULE: Bridgelux Vero 29 COB offers superior efficiency, stable consistant color and good color rendering CRI = 80. Available in 90 CRI.• Expected lamp life to be 50,000 hours with 70% lumen maintenance when ambient tempertures do not exceed 45°C. Lower ambient temperatures yield longer lamp life. BENEFITS OF REMOTE DRIVER PLATFORMS• Centralized power (driver) located in an accessible location

for easy maintenance.• Improved thermal management in lighting fixtures yields

dramatically increased LED life and reliability.• Remote driver with low voltage distribution – up to 200 ft.• Low voltage class 2 wiring between driver panel and

lighting fixtures. No conduit required.

Trim Finish w/polished flange

6SQSCA – Angled Open Reflector

L3 – C73 Prismatic Glass Lens**L5 – Frosted Glass Lens**L6 – Frosted Acrylic Lens**L7 – Solite Micro-Prismatic Glass Lens**L8 – Clear Poly Carbonate Lens**L9 – Clear Tempered Glass Lens**

LW6 – Micro Linear Spread Lens for Wall Washing**

SCLPF – Soft Specular Clear AlzakHAZPF – Haze Alzak

For white painted flange, drop “PF” from Catalog #. For other finishes, consult last page.

Fixture Series Lumen Level Color Temp Beam Dist.

6SQSCALCDB79VA = Low Lumen*B = High Lumen*

C9 = 90 CRI

5K = 5000K4K = 4000K35K = 3500K3K = 3000K27K = 2700K

M40 = 40°

W50 = 50°

XW60 = 60°

FL70 = 70°

L = Wide

3-IN-1-ER• Sloped Ceiling• Wall Wash• Accent• Single Axis Vertical

Adjustment

®

* See delivered lumens chart on next page

For Damp Location

** Lenses require the use of "L" beam distribution.


Wattage and Delivered Lumens Data at Specific Drive Currents for Low Lumen Fixtures

FIXTURE TRIM CURRENT (mA) WATTAGE RATED LUMENS

DELIVERED LUMENS

BEAM DISTRIBUTION LPW

6SQSCALCDB79V35KM40 6SQSCASCLPF 200 7 1000 966 40° 138.00

6SQSCALCDB79V35KW50 6SQSCASCLPF 200 7 1000 937 50° 133.86

6SQSCALCDB79V35KXW60 6SQSCASCLPF 200 7 1000 934 60° 133.43

6SQSCALCDB79V35KFL70 6SQSCASCLPF 200 7 1000 925 70° 132.14

































LCD8.0CECEUA

Above values reflect 3500K color temperatures Scaling factors for other color temperatures: 2700K=0.92; 3000K=0.97; 4000K=1.01; 5000K=1.04 Scaling Factor for 90 CRI=0.83


Wattage and Delivered Lumens Data at Specific Drive Currents for High Lumen Fixtures

FIXTURE TRIM CURRENT (mA) WATTAGE RATED LUMENS

DELIVERED LUMENS

BEAM DISTRIBUTION LPW













LCD8.0CECEUA

Above values reflect 3500K color temperatures Scaling factors for other color temperatures: 2700K=0.92; 3000K=0.97; 4000K=1.01; 5000K=1.04 Scaling Factor for 90 CRI=0.83


Typical Layout for Low Voltage LED Lighting Fixtures with Remote Driver Platform

AC Power

Sensors

AC Power Switch

LED Drive Output ChannelsLow Voltage Constant Current

Dimming Control Signals

LED Lighting Fixtures

DimmingSystem 0-10V, DMX, DALI

Distance to Fixtures Up To 200’ Shielded 2 Conductor Cable

16-20 AWGSwitches

WirelessControls

Note: For all CentralDrive systems, emergencybackup applications must use a dedicated power supply supported by inverter/generator power.

Power Supply™

LCD8.0CECEUA


LCD8.0CECEUA

Available Reflector Finishes

Standard Hanger Bars

ClearSoft Specular “SCL”

PewterDiffused “EPW”

Soft Specular “SPW”

HazeDiffused “HAZ”

StrawDiffused “EST”

Soft Specular “SST”

BronzeDiffused “EBZ”

Soft Specular “SBZ”

WheatDiffused “EWT”

Soft Specular “SWT”

OPTIONS & ACCESSORIES

Our standard reflector finish is soft specular clear Alzak (SCL) with a polished self-flange (PF). Additional hues are noted to left. Several of these are offered in both a soft specular and a diffused/matte finish. For colors not shown, contact our sales department for advice on custom anodized finishes.

Specified suffix of desired finish.Example: 4VLEDSCLPFFor white painted flange omit PF.

Interlocking L-Bar hanger bars are now standard with all recessed Coventry Architectural lighting fixtures. Installer friendly features include:• L-Bars are fabricated from identical L-shaped cross sec-

tions that form a sturdy ½” by 1-1/2” C-channel profile for superior rigidity.

• Pre-marked with spacing locations for 24” T-bar; 16” and 24” joist ceilings (wood and metal).

• Extension locks with an easy-to-use integral twist tab. No separate fastener.

• Interlocking and expandable to 24”. Can be increased to 36” or 48” with the use of one additional bars.

• Allows for offset mounting.• Integral and barbed nail spike for wood joist ceilings.• Fits into the c-channel notches on our butterfly

mounting bracket.• Complete details including video demonstration is avail-

able at www.pathwaylighting.com.

To increase the included L-Bar set to a 36” length, order two model #015-954 and use one per side. To increase to a 48” length, order one #LBAR which is a complete set of four bars and use two per side.

SERIES 6SQSCALCDB79V Sloped Ceiling · All Pathwa® products meet or exceed requirements as...

Documents

Transcript of SERIES 6SQSCALCDB79V Sloped Ceiling · All Pathwa® products meet or exceed requirements as...