Serial Server Configuration Peter Szyszko. Hardware Configuration Unit has to be connected to...
-
Upload
byron-jones -
Category
Documents
-
view
222 -
download
0
description
Transcript of Serial Server Configuration Peter Szyszko. Hardware Configuration Unit has to be connected to...
Serial Server ConfigurationPeter Szyszko
Hardware Configuration Unit has to be connected to network and powered. Computer has to be connected to the same
network. Ipconfig command from dos prompt shows current
computer IP. Monitor utility will help to find unit on the network
and identify it’s current IP address. In order to have TCP communication it is
necessary to have computer and device server in the same subnet or in case device is in different network segment- appropriate gateway and network configuration.
STE-501 interfaces
Finding Computer IP Address
Monitor utility – IP address change
Select Auto IP for DHCP Address Resolution
Web Page Login
COM1 – TCP Server Configuration
COM1 – TCP Server Configuration
Connection to TCP Server from Hyper Terminal
COM1 – TCP Client Configuration
Destination computer IP and port number
COM1-TCP Client Configuration
COM1- UDP Configuration
Destination computer IP and local listening port and destination port
COM1- UDP Configuration
COM1- Serial settings configuration
COM1 - Virtual COM port configuration
Computer Software Configuration Serial IP redirector hat to be installed from
CD. Virtual COMs have to be selected and
configured
Computer Virtual COM port configuration
Computer Virtual COM port configuration
Computer Virtual COM port configuration
Computer Virtual COM port configuration
Virtual COM4 Test