Separator Control with liquid level control and dump valve

Application Note

ProductThe Application

Solution

14685 West 105th Street, Lenexa, Kansas 66215 | 913-888-2630 | Fax 913-888-0767 | SORInc.com

Challenge

1400 Series Control Valve, 1600 Series Liquid Level Controller

Separator Control

The 1400 Series and 1600 Series from SOR offer a high level of customization in the factory as well as field customization. Both the 1400 Series and 1600 Series offer the ability to swap pilots and trim to convert from throttling to quick opening and vice versa. This field configurability allows operators to replace the trim and pilots as well as ensuring that operators are always maximizing the life of their instruments. In a highly competitive market, we all know every little bit helps!

The oil and gas industry is required to be particularly flexible with their process controls due to the unpredictable and often changing process variables encountered in the field. For example, when a new well is drilled, the majority of the oil produced from that well will be produced within the first two years of its life. When a new well is brought online, the level controller and dump valve controlling the liquid level in its separator may be required to continually remove liquid level since production is high. But, as the well ages, the production will decrease and the level controller and dump valve will be required to operate much less frequently.

SORInc.com | 913-888-2630 | Registered Quality System to ISO 9001 1/14Form 1639 (10.16) ©SOR Inc.

1400 Series Control Valves

• Fail-open or fail-close configurations available

• Easy to maintain with no special tools required

• Field repairable with multiple kits available

• Optional Tungsten carbide hardened trim for erosive applications

• NACE and high-temperature configurations available

• NPT, flanged, socket weld and butt weld end connections

• Designed to ANSI class IV shutoff classification

Featu

res a

nd B

en

efits

The 1400 series control valves are designed to be used in rugged, demanding applications like those found in the oil and gas industry. These valves are time tested to deliver increased reliability in the most demanding applications around the world. Each model is designed to provide superior performance and solve industry specific challenges.

ApplicationsThe 1400 series control valves are designed specifically to be used in conjunction with oil production equipment. The 1450 is a close coupled control valve designed for high pressure separators and scrubbers, and other processing equipment. The 1451 is a compact, uniquely designed product, to allow the plug and the seat to beconstantly submerged in the process media, giving the valve its “freezeless” characteristic. The 1400 series control valves can be used as direct replacements for competitive units already in service or packaged with other SOR products for new construction of oil and gas production equipment.

Model 1450(page 3)

Model 1451(page 11)

SEE MORE AT SORInc.com

Request Quote

http://www.sorinc.com/




http://www.sorinc.com/contact-us/request-a-quote/

Registered Quality System to ISO 9001 | 913-888-2630 | SORInc.com2/14 Form 1639 (10.16) ©SOR Inc.

Principles of Operation


The 1400 series control valves are modeled after an industry standard design of control valves specifically designed to be used in oil and gas production equipment. The 1400 series control valves are intended to be used in tandem with a level controller that provides a pneumatic signal to operate the valve.

All 1400 series control valves require a pneumatic input to operate. The pneumatic signal operates a force balance system consisting of: an adjusting spring, a diaphragm, a stem, a plug and seat. The force of the adjusting spring opposes the force of the pneumatic signal on the diaphragm. As pressure is either increased or reduced on the diaphragm, the plug is raised and lowered from the seat – this allows process fluid to flow through the valve.

The plug and the seat are very important components to the operation of the valve. The surface finish of the plug and seat determines if the valve will seal effectively. The shape of the plug determines the flowing characteristics of the valves. On/off trim is designed to only allow the valve to be completely open or completely shut. Throttling trim is designed to provide a percentage of full flow capacity at designated pneumatic inputs.

The 1450 series control valves are offered with either globe or tee body styles. The globe style body allows the process fluid to flow either direction – over the trim or under the trim. The tee body has three ports allowing a plug to be placed in one port to change the direction of flow from globe style to angle style body.

Adjusting Spring

Diaphragm

Breather Plug

Packing Set

Plug

Cage/Seat Ring

FAIL-OPEN

Travel Indicator

Spring Cover

Upper Spring Retainer

Diaphragm Plate

Set Screw

at Base of Cover

Travel Indicator

Adjusting Spring

Diaphragm

Packing Set

Plug

Cage/Seat Ring

FAIL-CLOSED

Adjusting Screw

Upper Spring Retainer

Diaphragm Plate

Spring Housing

Adjusting Nut



Design and specifications are subject to change without notice. For latest revision, see SORInc.com.

Available configurations Close-coupled (Model 1450) Fail-open or fail-close

Flow characteristic Modified percent (throttling) Quick opening (on/off)

Body styles Globe (1” & 2”) & tee (1” only)

End connections NPT(F), flanged, socket weld & butt weld

Pressure ratings 3750 psi at 100˚F

Assembled valve temperature range -40 to 200˚F (-40 to 93˚C)

Product Specifications

Available trim sizes 1/4”, 3/8”, 1/2”, 3/4” & 1”

Shutoff classification ANSI class IV (Stainless steel or Tungsten carbide trim)

Flow direction Either direction, to suit the application Flow up (under the seat) recommended for throttling applications

Air pressure to actuator 3-15 spring 0 to 20 psi control signal recommended 6-30 spring 0 to 35 psi control signal recommended

1450 Control Valve


Model 1450

The SOR 1450 valve is a close-coupled control (dump) valve and is designed to meet the high pressure and erosive applications common to the oil and gas industry. These valves are ideally suited for process media control applications including: separators, scrubbers, wellheads and other oilfield equipment. The ease of maintenance, rugged steel construction, flexibility to meet a wide variety of applications, and safety features make these control valves the preferred choice of production operators worldwide.

Features• Ease of maintenance - No special tools - Field repairable - Field replaceable trim• Bonnet safety pressure relief• NACE and high-temperature configurations available• Optional Tungsten carbide hardened trim for erosive applications• Reverse and direct acting options• Bi-directional flow




1450 Control Valve


3 Pressure Rating

NPT(F) (3750 PSI)ANSI 150#ANSI 300#ANSI 600#ANSI 900#

ACDEF

No. 35 Act. w/3-15 SpringNo. 35 Act. w/6-30 SpringNo. 70 Act. w/3-15 SpringNo. 70 Act. w/6-30 Spring

5 Actuator Selection

33367376

21*2

6 Actuator Type

RD

Reverse (Fail Close)Direct (Fail Open)

7 Trim Size

23468

1/4”3/8”1/2”3/4”1”

8 Body Style

TG

Tee (only available on 1” Body Size)Globe

10 Seal Material

BV

Buna-NViton®

Trim Characteristic

ST

Quick OpeningThrottle

9 End Connection

TRJ

NPT(F)Raised Face FlangeRing Type Joint Flange

4 1018/A105 CS

1018/A105 CS (NACE)

Body Material

AN

12

11ST

17-4PH Stainless SteelTungsten Carbide

Trim Material

Body Size

Model 11450 Close-

coupled valve

1450 -

1” 2”

1450 - 2 A A 36 - D 4 G T - B S S Example Model No.

How to OrderBelow is the SOR quick select model number tree that provides you with all the options to configure and order a product for your application. • You must select a designator for each component • Reference tables, charts and additional information are provided throughout the catalog to help

you make your selections, see pages noted in the tree.

* 1” body size only available with NPT(F) pressure rating.



1450 Options


Valve Component Options

Body ASTM A216 Gr. WCC

Bonnet 316 Stainless Steel

Hammer Nut 4140 Steel

Stem 316 Stainless Steel

Packing TFE V Ring

Packing Spring 302 Stainless Steel

Packing Washer CSTL

Packing Retainer 17-4 PH

O-Ring Wetted Nitrile

Viton

Diaphragm Neoprene/Nylon

O-Ring Non Wetted Nitrile

Viton

Actuator Spring Steel

Adjust. Screw CSTL/PLtd.

Diaphragm Housing CSTL

Diaphragm Plate CSTL

Travel Indicator Stainless Steel

Actuator Pressure Connection Size 1/4” - 18 NPT Thread

Body Size Trim Size Valve Opening - Percent of Total Travel Quick Opening

in. mm in. mm 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 100%

1.00 25

0.25 6.4 .28 .51 .66 .77 .88 .99 1.1 1.2 1.3 1.4 1.7

0.38 9.5 .31 .62 .94 1.3 1.6 2.1 2.5 2.9 3.4 3.7 3.8

0.50 12.7 .56 1.1 1.7 2.3 2.9 3.6 4.3 5.0 5.4 5.6 5.6

0.75 19.1 .75 1.6 2.4 3.4 4.6 6.1 7.9 9.7 11 11 12

1.0 25.4 .98 2.0 3.4 6.1 8.9 12 14 14 15 15 15

2.00 50

0.25 6.4 .28 .51 .66 .77 .88 .99 1.1 1.2 1.3 1.4 1.7

0.38 9.5 .31 .62 .94 1.3 1.6 2.1 2.5 2.9 3.4 3.7 3.8

0.50 12.7 .59 1.2 1.8 2.3 3.0 3.7 4.6 5.5 6.0 6.1 6.1

0.75 19.1 .88 1.8 2.8 3.8 5.1 6.6 8.5 11 12 13 13

1.0 25.4 1.0 2.0 3.6 6.5 9.4 12 14 15 17 17 18

Body Size Pressure RatingNPT Body Style

in. mm psi bar

1.00 25 3750 259 X Globe, “T”

2.00 50 3750 259 X Globe

Materials of Construction

Body End Connections and Pressure Ratings

Estimated Flow Coefficient (Cv) Globe Body



1450 Options


TrimSize Flow

Direction

Signal to No. 35 Actuator Signal to No. 70 Actuator

3-15 Spring 6-30 Spring 3-15 Spring 6-30 Springin. mm 3-15 psi 0-20 psi 6-30 psi 0-35 psi 3-15 psi 0-20 psi 6-30 psi 0-35 psi

0.25 6.4

Up

3750 3860 3750 3750 3750 3750 3750 3750

0.38 9.5 2050 3200 3400 3750 3750 3750 3750 3750

0.50 12.7 1100 1600 1800 2300 1650 3200 3750 3750

0.75 19.1 300 500 700 950 500 950 2000 2800

1.0 25.4 100 200 300 500 200 400 950 1450

0.25 6.4

Down

3750 3800 3750 3750 3750 3750 3750 3750

0.38 9.5 3750 3800 3750 3750 3750 3750 3750 3750

0.50 12.7 3350 3800 3750 3750 3750 3750 3750 3750

0.75 19.1 1550 2300 2500 3200 2000 2800 3750 3750

1.0 25.4 750 1100 1200 1700 950 1450 2500 2950

Trim SizeFlow

Direction

Signal to No. 35 Actuator1

Signal to No. 70 Actuator1 Flow

Direction



in. mm 3-15 Spring

6-30 Spring

3-15 Spring

6-30 Spring

3-15 Spring

6-30 Spring

3-15 Spring

6-30 Spring

0.25 6.4

Up

3750 3750 3750 3750

Down

3750 3750 3750 3750

0.38 9.5 2700 3750 3750 3750 3750 3750 3750 3750

0.50 12.7 1350 2850 2550 3750 3800 3750 3750 3750

0.75 19.1 400 1050 700 2000 1750 1950 3750 3750

1.0 25.4 150 500 200 950 850 950 1850 28001Actual signal pressure to actuator includes an additional 5 psi (0.3 bar) of supply pressure to the controller.

Actuator Maximum Allowable Shutoff Pressure Drops, Reverse Acting (Fail Close)

Actuator Maximum Allowable Shutoff Pressure Drops, Direct Acting (Fail Open)

Diaphragm Effective Area & Housing Max. Pressure

Actuator Size Diaphragm Effective Area Housing Maximum Pressure

No. 35 35 in2 50 psi

No. 70 70 in2 35 psi



1450 Options


Only genuine SOR replacement parts should be used to make repairs. Please contact your local representative for ordering information.

Trim Replacement Kits

Quick Opening 1/4” 3/8” 1/2” 3/4” 1”

17-4PH SST (BUNA-N O-Ring) 5678400P 5678401P 5678402P 5678403P 5678404P

17-4PH SST (VITON O-Ring) 5678405P 5678406P 5678407P 5678408P 5678409P

Tungsten (BUNA-N O-Ring) 5678410P 5678411P 5678412P 5678413P 5678414P

Tungsten (VITON O-Ring) 5678415P 5678416P 5678417P 5678418P 5678419P

Throttling

17-4PH SST (BUNA-N O-Ring) 5678420P 5678421P 5678422P 5678423P 5678424P

17-4PH SST (VITON O-Ring) 5678425P 5678426P 5678427P 5678428P 5678429P

Tungsten (BUNA-N O-Ring) 5678430P 5678431P 5678432P 5678433P 5678434P

Tungsten (VITON O-Ring) 5678435P 5678436P 5678437P 5678438P 5678439P

Actuator Repair Kits

35 in2 Actuator

Direct Acting BUNA-N O-Rings 5678488P

Direct Acting VITON O-Rings 5678489P

Reverse Acting BUNA-N O-Rings 5678486P

Reverse Acting VITON O-Rings 5678487P

70 in2 Actuator

Direct Acting BUNA-N O-Rings 5678492P

Direct Acting VITON O-Rings 5678493P

Reverse Acting BUNA-N O-Rings 5678490P

Reverse Acting VITON O-Rings 5678491P

Packing Kits

Direct Acting BUNA-N Packing 5678495P

Direct Acting VITON Packing 5678497P

Reverse Acting BUNA-N Packing 5678494P

Reverse Acting VITON Packing 5678496P

Repair Kits



1450 Dimensions


ISO-9001

14685 W 105TH ST LENEXA, KS 66215 USA913-888-2630SORINC.COM

66.72-5/8

79.43-1/8

158.86-1/4

44.71-49/64

135.35-21/64

C77.53-3/64

B

A

Model Name: 5678455.ASSEM/1.1

PRODUCT CERTIFICATION DRAWINGALL DIMENSIONS ARE 1/16 INUNLESS OTHERWISE SPECIFIED

LINEAR = MMIN

DRAWN BY

J REHMCHECKED BY

M SMITHENGINEER APPROVAL

S BOALDATE

10/22/15THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR.

NO USE WHATSOEVER OF THE INFORMATION CONTAINEDHEREON, NOR REPRODUCTION IN WHOLE OR PART MAY BE

MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR.

TITLE

DIM DWG 1450 CONTROL VALVE FAIL CLOSEW/1"NPTF GLOBE BODY

EO NUMBER: 5319

SCALE: 0.35

DO NOT SCALE PRINT

DRAWING NUMBER REV

5678455 1

SHEET 1 OF 1DWG SIZE

B

MODEL # SALES ORDER # LINE ITEM # PURCHASE ORDER #SALES PAGE

ACTUATORSELECTION DIM A DIM B DIM C

35/3-15 241.39-1/2

69.92-3/4

316.012-7/16

35/6-30 241.39-1/2

108.04-1/4

363.514-5/16

70/3-15 317.512-1/2

108.04-1/4

363.514-5/16

70/6-30 317.512-1/2

108.04-1/4

439.717-5/16

2X 1" NPTF

1/4" NPTF

ISO-9001


66.72-5/8

79.43-1/8

158.86-1/4

44.71-49/64

135.35-21/64

C77.53-3/64

B

A



LINEAR = MMIN

DRAWN BY

J REHMCHECKED BY


S BOALDATE




TITLE


EO NUMBER: 5319

SCALE: 0.35

DO NOT SCALE PRINT

DRAWING NUMBER REV

5678455 1


B



35/3-15 241.39-1/2

69.92-3/4

316.012-7/16

35/6-30 241.39-1/2

108.04-1/4

363.514-5/16

70/3-15 317.512-1/2

108.04-1/4

363.514-5/16

70/6-30 317.512-1/2

108.04-1/4

439.717-5/16

2X 1" NPTF

1/4" NPTF

ISO-9001


66.72-5/8

95.33-3/4

190.57-1/2

42.91-11/16

135.35-21/64

C77.53-3/64

B

A



LINEAR = MMIN

DRAWN BY

J REHMCHECKED BY


S BOALDATE




TITLE


EO NUMBER: 5319

SCALE: 0.35

DO NOT SCALE PRINT

DRAWING NUMBER REV

5678456 1


B



35/3-15 241.39-1/2

69.92-3/4

316.012-7/16

35/6-30 241.39-1/2

108.04-1/4

363.514-5/16

70/3-15 317.512-1/2

108.04-1/4

363.514-5/16

70/6-30 317.512-1/2

108.04-1/4

439.717-5/16

2X 2" NPTF

1/4" NPTF

ISO-9001


66.72-5/8

95.33-3/4

190.57-1/2

42.91-11/16

135.35-21/64

C77.53-3/64

B

A



LINEAR = MMIN

DRAWN BY

J REHMCHECKED BY


S BOALDATE




TITLE


EO NUMBER: 5319

SCALE: 0.35

DO NOT SCALE PRINT

DRAWING NUMBER REV

5678456 1


B



35/3-15 241.39-1/2

69.92-3/4

316.012-7/16

35/6-30 241.39-1/2

108.04-1/4

363.514-5/16

70/3-15 317.512-1/2

108.04-1/4

363.514-5/16

70/6-30 317.512-1/2

108.04-1/4

439.717-5/16

2X 2" NPTF

1/4" NPTF

Drawing 5678455

Dimensions in this catalog are for reference only. They may be changed without notice. Contact the factory for certified drawings for a particular model number. Dimensions are expressed as millimeters over inches (Linear = mm/in.)

Drawing 5678456

2 Inch Globe Fail-Closed

1 Inch Globe Fail-Closed



1450 Dimensions


Drawing 5678453

1 Inch TeeFail-Closed

ISO-9001


79.43-1/8

158.86-1/4

135.35-21/64

C

66.72-5/8

A

B

79.43-1/8

77.53-3/64



LINEAR = MMIN

DRAWN BY

J REHMCHECKED BY


S BOALDATE




TITLE

DIM DWG 1450 CONTROL VALVE FAIL CLOSEW/1"NPTF TEE BODY

EO NUMBER: 5319

SCALE: 0.35

DO NOT SCALE PRINT

DRAWING NUMBER REV

5678453 1


B



35/3-15 241.39-1/2

69.92-3/4

316.012-7/16

35/6-30 241.39-1/2

108.04-1/4

363.514-5/16

70/3-15 317.512-1/2

108.04-1/4

363.514-5/16

70/6-30 317.512-1/2

108.04-1/4

439.717-5/16

3X 1" NPTF

1/4" NPTF

1"NPT PLUG

ISO-9001


79.43-1/8

158.86-1/4

135.35-21/64

C

66.72-5/8

A

B

79.43-1/8

77.53-3/64



LINEAR = MMIN

DRAWN BY

J REHMCHECKED BY


S BOALDATE




TITLE

DIM DWG 1450 CONTROL VALVE FAIL CLOSEW/1"NPTF TEE BODY

EO NUMBER: 5319

SCALE: 0.35

DO NOT SCALE PRINT

DRAWING NUMBER REV

5678453 1


B



35/3-15 241.39-1/2

69.92-3/4

316.012-7/16

35/6-30 241.39-1/2

108.04-1/4

363.514-5/16

70/3-15 317.512-1/2

108.04-1/4

363.514-5/16

70/6-30 317.512-1/2

108.04-1/4

439.717-5/16

3X 1" NPTF

1/4" NPTF

1"NPT PLUG




ISO-9001


66.72-5/8

E

D

42.91-11/16

135.35-21/64

C77.53-3/64

B

A

F



LINEAR = MMIN

DRAWN BY

J REHMCHECKED BY


S BOALDATE




TITLE

DIM DWG 1450 CONTROL VALVE FAIL CLOSEW/2" FLG GLOBE BODY ASSY

EO NUMBER: 5319A

SCALE: 0.35

DO NOT SCALE PRINT

DRAWING NUMBER REV

5678448 1


B



35/3-15 241.39-1/2

69.92-3/4

316.012-7/16

35/6-30 241.39-1/2

108.04-1/4

363.514-5/16

70/3-15 317.512-1/2

108.04-1/4

363.514-5/16

70/6-30 317.512-1/2

108.04-1/4

439.717-5/16

FLANGE DIM D DIM E DIM F

RF 150# 25410

1275 45

RF 300# 266.710-1/2

133.45-1/4 22.5

RF 600# 285.811-1/4

142.95-5/8 22.5

RF 900#/1500# 32712-7/8

163.56-7/16 22.5

RTJ 150# 266.710-1/2

133.45-1/4 45

RTJ 300# 282.611-1/8

141.35-9/16 22.5

RTJ 600# 288.911-3/8

144.45-11/16 22.5

RTJ 900#/1500# 330.213

165.16-1/2 22.5

2X 2" FLANGE

1/4" NPTF

Drawing 5678448

2 inch FLG globeFail-Closed

1450 Dimensions



ISO-9001


66.72-5/8

E

D

42.91-11/16

135.35-21/64

C77.53-3/64

B

A

F



LINEAR = MMIN

DRAWN BY

J REHMCHECKED BY


S BOALDATE




TITLE

DIM DWG 1450 CONTROL VALVE FAIL CLOSEW/2" FLG GLOBE BODY ASSY

EO NUMBER: 5319A

SCALE: 0.35

DO NOT SCALE PRINT

DRAWING NUMBER REV

5678448 1


B



35/3-15 241.39-1/2

69.92-3/4

316.012-7/16

35/6-30 241.39-1/2

108.04-1/4

363.514-5/16

70/3-15 317.512-1/2

108.04-1/4

363.514-5/16

70/6-30 317.512-1/2

108.04-1/4

439.717-5/16


RF 150# 25410

1275 45

RF 300# 266.710-1/2

133.45-1/4 22.5

RF 600# 285.811-1/4

142.95-5/8 22.5

RF 900#/1500# 32712-7/8

163.56-7/16 22.5

RTJ 150# 266.710-1/2

133.45-1/4 45

RTJ 300# 282.611-1/8

141.35-9/16 22.5

RTJ 600# 288.911-3/8

144.45-11/16 22.5

RTJ 900#/1500# 330.213

165.16-1/2 22.5

2X 2" FLANGE

1/4" NPTF

ISO-9001


E

D

42.91-11/16

212.88-3/8

77.53-3/64

C

66.72-5/8B

A

F



LINEAR = MMIN

DRAWN BY

J REHMCHECKED BY


S BOALDATE




TITLE

DIM DWG 1450 CONTROL VALVE FAIL OPENW/2" FLG GLOBE BODY ASSY

EO NUMBER: 5319A

SCALE: 0.35

DO NOT SCALE PRINT

DRAWING NUMBER REV

5678449 1


B



35/3-15 241.39-1/2

69.92-3/4

385.115-5/32

35/6-30 241.39-1/2

108.04-1/4

430.416-15/16

70/3-15 317.512-1/2

108.04-1/4

430.416-15/16

70/6-30 317.512-1/2

108.04-1/4

514.620-1/4


RF 150# 25410

1275 45

RF 300# 266.710-1/2

133.45-1/4 22.5

RF 600# 285.811-1/4

142.95-5/8 22.5

RF 900#/1500# 32712-7/8

163.56-7/16 22.5

RTJ 150# 266.710-1/2

133.45-1/4 45

RTJ 300# 282.611-1/8

141.35-9/16 22.5

RTJ 600# 288.911-3/8

144.45-11/16 22.5

RTJ 900#/1500# 330.213

165.16-1/2 22.5

1/4" NPTF

2X 2" FLANGE

1/4" NPTBREATHERPLUG

ISO-9001


E

D

42.91-11/16

212.88-3/8

77.53-3/64

C

66.72-5/8B

A

F



LINEAR = MMIN

DRAWN BY

J REHMCHECKED BY


S BOALDATE




TITLE

DIM DWG 1450 CONTROL VALVE FAIL OPENW/2" FLG GLOBE BODY ASSY

EO NUMBER: 5319A

SCALE: 0.35

DO NOT SCALE PRINT

DRAWING NUMBER REV

5678449 1


B



35/3-15 241.39-1/2

69.92-3/4

385.115-5/32

35/6-30 241.39-1/2

108.04-1/4

430.416-15/16

70/3-15 317.512-1/2

108.04-1/4

430.416-15/16

70/6-30 317.512-1/2

108.04-1/4

514.620-1/4


RF 150# 25410

1275 45

RF 300# 266.710-1/2

133.45-1/4 22.5

RF 600# 285.811-1/4

142.95-5/8 22.5

RF 900#/1500# 32712-7/8

163.56-7/16 22.5

RTJ 150# 266.710-1/2

133.45-1/4 45

RTJ 300# 282.611-1/8

141.35-9/16 22.5

RTJ 600# 288.911-3/8

144.45-11/16 22.5

RTJ 900#/1500# 330.213

165.16-1/2 22.5

1/4" NPTF

2X 2" FLANGE

1/4" NPTBREATHERPLUG

Drawing 5678449

2 inch FLG globeFail-Open



1451 Control Valve


Design and specifications are subject to change without notice. For latest revision, see SORInc.com.

Model 1451

The SOR 1451 control valves are “freezeless” dump valves and are perfectly suited for fluid control in oil and gas separators and other process vessels. The valve body design allows the plug and seat to be constantly submerged in the process media, thus giving the valve its “freezeless” characteristic.

Features• NACE option available • Stainless Steel Trim• Compact size

Process Connection 1” MNPT x 1/2” FNPT 1” MNPT x 1” FNPT 2” MNPT x 1” FNPT

Body Style “Freezeless” angle

Maximum Operating Pressure 2220 psi at 100oF

Operating Temperature Range -40o to 200oF (-40o to 93oC)


Actuator Air supply Connection 1/4” NPT(F) Action Reverse (fail close) Effective area 35 sq. in Maximum Supply Pressure 50 psi

Trim Characteristic Quick opening (on/off)

Port Diameter/Flow coefficient (Cv) 0.38”/2 Cv




How to OrderBelow is the SOR quick select model number tree that provides you with all the options to configure and order a product for your application. • You must select a designator for each component • Reference tables, charts and additional information are provided throughout the catalog to

help you make your selections, see pages noted in the tree.

1451 Control Valve


3 Body Connection

Threaded T

2A

B

C

4 Wetted Material

S

NStandard

Nace

5 Seal Material

B

V

Buna-N

Viton®

Body Size

1” MNPT x ½” FNPT

1” MNPT x 1” FNPT

2” MNPT x 1” FNPT

1451- C - T S - B Example Model No.

11451

Model

Freezless Valve



Drawing 5678454

Dimensions

1451 Control Valve


ISO-9001


66.72-5/8

241.39-1/2

181.37-9/64

62.92-15/32

77.43-3/64



LINEAR = MMIN

DRAWN BY

J REHMCHECKED BY


S BOALDATE




TITLE

DIM DWG 1451 CONTROL VALVE FREEZELESS2"NPTM X 1"NPTF

EO NUMBER: 5319

SCALE: 0.75

DO NOT SCALE PRINT

DRAWING NUMBER REV

5678454 1


B


1/4" NPTF

2" NPTM

1" NPTF


Description MaterialLiquid Chamber Carbon Steel

Cover Carbon Steel

Body Carbon Steel

Plug 17-4 Stainless Steel

Seat 17-4 Stainless Steel

Valve Stem 316 Stainless Steel

Seals Buna-N

Viton® (Opt.)

Actuator Housing Carbon Steel




1600 series liquid level controllers are manufactured to be ideal for oilfield scrubber and separator applications. Their rugged and versatile design makes them the preferred choice of production operators for reliable service in a wide variety of applications. 1600 series controllers are available with pneumatic snap or throttling pilot; direct or reverse action; with a variety of displacer sizes, materials and vessel connections.


Body Carbon Steel

Case & Cover Die Cast Aluminum

Pilots Aluminum w/SS Internals

Pilot Gaskets/Diaphragm Neoprene

Gauges Brass or Vibration Resistant Brass

316SS or Vibration Resistant 316SS (optional)

Shaft 316SS

Bearing Blocks 316SS

Bearings Stainless Steel

Seals Buna-N

Viton® (optional)

Displacer PVC

316SS (optional)

Displacer Arm 316 Stainless Steel

Vertical Hanger (Swivel) 316 Stainless Steel

1600 Series Liquid Level Controllers

Features• Weather proof case utilizes a gasket between its cover and case to seal out the effects of outside weathering

• Well suited for liquid-liquid interface detection

• Controller case is easily field reversible

• Standard displacer materials are PVC and 316 stainless steel

• Available with wetted materials that meet NACE MR0175 specifications for sour service


Available End Connection Sizes Threaded & Butt Weld 2” Flanged 2”, 3”, 4”, 6”Pneumatic Pilots Snap (on/off) 0-20/0-30 psi output Throttle (modulating) 3-15/6-30 psi outputSupply Pressure Requirement 3-15 or 0-20 psi output 20-30 psi min. 6-30 or 0-30 psi output 35-40 psi min.Supply & Output Connections Pneumatic Pilots: 1/4” NPTFPressure Ratings 2” Threaded: 6000 psi Flanged: 2220 psi (900#)Specific Gravity (minimum allowable fluid) Snap and No Bleed Pilot 0.35 Throttling Pilot 0.60 Interface Minimum Differential 0.04

SEE MORE AT SORInc.com

Request Quote





http://www.sorinc.com/contact-us/request-a-quote/


Principles of Operation

1600 SeriesLiquid Level Controllers

The 1600 series liquid level controllers are designed to sense a liquid level and supply a pneumatic signal to a control valve to control the level of the process liquid. The 1600 series liquid level controllers sense the liquid level using a displacer and then is configured to operate a pneumatic pilot at field selectable set points.

The 1600 series uses a displacer to sense the liquid level in process vessels. As the process liquid rises the displacer’s effective weight is reduced. Depending on the set points that the level controller has been configured to operate at, the pilot will supply a pneumatic signal to a control valve to control the level of the process fluid.

The pilot in the 1600 series controls when the inserted pneumatic gas is sent through the outlet port to control pneumatic equipment such as a control valve. The pilot is made up of two valves. The first valve is used to allow pressure through the outlet port and the second is used to exhaust pressure.

First the pneumatic air enters the inlet port with a specific pressure. This pressure pushes down on valve “1” creating a downward force holding the valve closed.

Once the level interfaces reaches the desired set point, the displacer arm will rotate the torque bar arm, thrusting the pin upwards to open valve “1” and allow the pneumatic air to flow through the outlet port. This in turn, closes the exhaust valve “2”.

When the level has dropped enough for the displacer arm to be lowered, the pin will lower, closing valve “1”. Once valve “1” is closed, valve “2” will open to exhaust any pressure left in the housing.

The throttling pilot works similarly to the snap pilot. The difference being a diaphragm “3” and spring “4” are used in conjunction with valves “1” and “2” to create a force balanced throttling pilot.

When the level has been raised enough, the force from the rising displacer will force the pin upwards opening valve “1” allowing the inlet pressure to flow through the outlet port. This outlet pressure also pushes on the diaphragm “3” to create a force balance.

If the force acting on the pin changes, the valve “1” will either open or close to allow the forces to become balanced once again. If valve “1” closes, the pressure will be exhausted through valve 2.

Snap Pilot

Throttle Pilot



How to Order


Pilot

Snap PilotThrottling PilotNo Bleed Snap PilotSee page 2 for comparison

* Options may change specifications and dimensions, contact Customer Service for more information.

4 End Connection Type

NPT(M)Raised Face Flange

Ring Type Joint Flange

TR*J*

1018/A105 CS1018/A105 CS (NACE)

6 Body Material

AN

21015

7 STN

8 Mounting/Controller Action

LDLRRDRR

Left Hand/DirectLeft Hand/ReverseRight Hand/DirectRight Hand/ReverseSee page 4 for details

9 Seal Material

BV

Buna-NViton®

111 Displacer Dimensions/Material

ABC

1.88” x 12” / PVC1.66” x 12” / 316SS1.66” x 24” / 316SSSee page 4 for details

10 Gauge Type

BSCT

Brass Internals316SS InternalsVibration Resistant BrassVibration Resistant 316SS

5 NPT(M) (6000 PSI)

ANSI 150#ANSI 300#ANSI 600#ANSI 900#

Pressure Rating

ACDEF

Arm Length

Model 116001601

Sealed CaseStandard Case

10 inches15 inches

1600-15 20 - T A N S - LR V S A Example Model No.

320304060

End Connection

2 inches 3 inches 4 inches 6 inches

20

Below is the SOR quick select model number tree that provides you with all the options to configure and order a product for your application. •Youmustselectadesignatorforeachcomponent •Referencetables,chartsandadditionalinformationareprovidedthroughoutthecatalogto

help you make your selections, see pages noted in the tree.

-



Specification Guidelines


Body Material Seals Displacer

MaterialTemperature Limits

°F °C

Carbon Steel

BunaPVC -40 to 140 -40 to 60

316SS -40 to 180 -40 to 82

Viton®PVC -20 to 140 -29 to 60

316SS -20 to 400 -29 to 204

Operating Temperature Limits

Displacer Material Maximum Pressure (psig)

PVC 6000

316 Stainless Steel 2000 at 100°F (38°C)

Displacer Pressure Ratings

Right or Left Mount

The 1600 Series can be configured as a right-hand mount or left-hand mount. The orientation of the displacer to the controller (while facing the front side of the controller) designates the mounting style. The mounting can be adjusted in the field.

Controller action is “Direct Acting” when the output signal increases as the liquid level rises on the displacer. In “Reverse Acting,” the output signal decreases as the liquid level increases on the displacer.

___

1600 SERIES LIQUID LEVEL CONTROLLERFor Service Limits and Materials, See Nameplate Inside Case

START UPRock torque bar by hand to verify arm is NOT resting against vessel nozzle. (Arm must be reasonably centered in connection opening). Turn adjusting knob under balance spring to position arm.

TO ADJUST LEVELTurn adjusting knob under balance spring to raise or lower level.

TO LOWER LEVELTurn knob CLOCKWISE to increase compression on balance spring.

TO RAISE LEVELTurn knob COUNTERCLOCKWISE to decrease compression on balance spring.

TO ADJUST PROPORTIONAL BAND (SPAN)

Loosen screw in sensitivity fulcrum and slide fulcrum along flapper bar. To DECREASE prop. band (INCREASES SENSITIVITY) slide fulcrum toward snap ring. To INCREASE prop. band (DECREASES SENSITIVITY) slide fulcrum away from snap ring.

ARTWORK_REVERSE_LH.DRW

CONTROLLER-REVERSE-LH.ASM

ARTWORK_REVERSE_RH.DRW

CONTROLLER-REVERSE-RH.ASM

ARTWORK_DIRECT_LH.DRW

CONTROLLER-DIRECT-LH.ASM

SENSITIVITY FULCRUMTHUMB SCREW

SNAP RINGFLAPPER BAR

ARTWORK_DIRECT_RH.DRW

CONTROLLER-DIRECT-RH.ASM

ARM

ADJUSTING KNOB

TORQUE BAR PROCESS CONNECTION

DIRECT ACTINGRising Level INCREASES Pilot Output

REVERSE ACTINGRising Level DECREASES Pilot Output



Form 1627 (05.15) ©SOR Inc.

LEFT HAND MOUNT RIGHT HAND MOUNT

Drawing 5678291

___

1600 SERIES LIQUID LEVEL CONTROLLERFor Service Limits and Materials, See Nameplate Inside Case

START UPRock torque bar by hand to verify arm is NOT resting against vessel nozzle. (Arm must be reasonably centered in connection opening). Turn adjusting knob under balance spring to position arm.

TO ADJUST LEVELTurn adjusting knob under balance spring to raise or lower level.

TO LOWER LEVELTurn knob CLOCKWISE to increase compression on balance spring.

TO RAISE LEVELTurn knob COUNTERCLOCKWISE to decrease compression on balance spring.

TO ADJUST PROPORTIONAL BAND (SPAN)

Loosen screw in sensitivity fulcrum and slide fulcrum along flapper bar. To DECREASE prop. band (INCREASES SENSITIVITY) slide fulcrum toward snap ring. To INCREASE prop. band (DECREASES SENSITIVITY) slide fulcrum away from snap ring.

ARTWORK_REVERSE_LH.DRW

CONTROLLER-REVERSE-LH.ASM

ARTWORK_REVERSE_RH.DRW

CONTROLLER-REVERSE-RH.ASM

ARTWORK_DIRECT_LH.DRW

CONTROLLER-DIRECT-LH.ASM

SENSITIVITY FULCRUMTHUMB SCREW

SNAP RINGFLAPPER BAR

ARTWORK_DIRECT_RH.DRW

CONTROLLER-DIRECT-RH.ASM

ARM

ADJUSTING KNOB

TORQUE BAR PROCESS CONNECTION





Form 1627 (05.15) ©SOR Inc.


Drawing 5678291




Glossary of Terms


Proportional BandThe Proportional Band is referred to as the percentage of the displacer that is used to actuate the level controller. For example, if 9 inches of change in level will actuate the level controller and a 12” long displacer is used, then the level controller will have a 75% proportional band. To adjust the proportional band, slide the fulcrum on the flapper bar along the sensitivity scale. To decrease the proportional band, increase the sensitivity. To increase the proportional band, decrease the sensitivity.

Controller ActionThe Controller Action is determined by the orientation of the flapper bar as shown on page “4”. When the flapper bar pivot point is on the same side as the spring, the controller action is “Direct Acting”. When the flapper bar pivot point is on the opposite side as the spring, it is a “Reverse Acting” controller. The controller action is either direct acting or reverse acting. A “Direct Acting” controller will increase the output signal as the liquid rises. For a “Reverse Acting” controller, the output signal will decrease as the pressure rises.

MountingThe mounting of the 1600 series liquid level controller is determined by the orientation of the body and displacer arm. While facing the front of the controller case, the side that body and displacer arm are oriented determines the mounting style. If the displacer is on the right side of the controller case while facing the front of the controller, then it is considered “right-hand”. If the displacer is on the left side of the controller case while facing the front of the controller, then it is considered “left-hand”. The mounting configuration can be easily changed out in the field.

Pilot Replacement Kits Throttling Quick Opening

Sealed (1600)

With Plugs 5678390P 5678292P

Non-Sealed (1601)

Brass 5678388P 5678393P

Vibration Resistant Brass

5678386P 5678395P

316SS 5678389P 5678394P

Vibration Resistant 316SS

5678387P 5678396P

Without Plugs 5678123P 5678392P

Sealed Door Assembly 5678484P

Standard Door Assembly 5678483P

Displacer Assembly Kits

Displacer Kit 12” 316SST 5678481P

Displacer Kit 12” PVC 5678480P

Displacer Kit 24” 316SST 5678482P

Pilot Repair Kits

Quick Opening 5678476P

Throttling 5678477P

Swivel Assembly Kit 5678485P

Process Seal Repair Kit BUNA-N 5678478P

Process Seal Repair Kit VITON 5678479P

Repair Kits




ISO-9001


101.64

101.64

73.02-7/8

222.38-3/4

205.88-7/64

53.22-3/32

97.63-27/32

20.251/64

C

B

A

124.64-29/32

131.55-11/64

43.31-45/64



LINEAR = MMIN

DRAWN BY

J REHMCHECKED BY


S BOALDATE




TITLE

DIM DWG 1600 SEALED CONTROLLER

EO NUMBER: 5319

SCALE: 0.25

DO NOT SCALE PRINT

DRAWING NUMBER REV

5678451 1


B


DISPLACER DIM A DIM B

1.88 X 12 PVC 340.813-27/64

47.61-7/8

1.66 X 12 316SST 340.813-27/64

42.21-21/32

1.66 X 24 316SST 645.625-27/64

42.21-21/32

ARM LENGTH DIM C

10 INCH 130.45-1/8

15 INCH 257.410-1/8

NOTES:1. DIMENSION APPROXIMATE AND BASED ON A FIVE THREAD ENGAGEMENT.

2" NPTM

1/4" NPTF

1

1

1

ISO-9001


101.64

101.64

73.02-7/8

222.38-3/4

205.88-7/64

53.22-3/32

97.63-27/32

20.251/64

C

B

A

124.64-29/32

131.55-11/64

43.31-45/64



LINEAR = MMIN

DRAWN BY

J REHMCHECKED BY


S BOALDATE




TITLE


EO NUMBER: 5319

SCALE: 0.25

DO NOT SCALE PRINT

DRAWING NUMBER REV

5678451 1


B



1.88 X 12 PVC 340.813-27/64

47.61-7/8

1.66 X 12 316SST 340.813-27/64

42.21-21/32

1.66 X 24 316SST 645.625-27/64

42.21-21/32

ARM LENGTH DIM C

10 INCH 130.45-1/8

15 INCH 257.410-1/8


2" NPTM

1/4" NPTF

1

1

1

ISO-9001


101.64

101.64

73.02-7/8

222.38-3/4

205.88-7/64

53.22-3/32

97.63-27/32

20.251/64

C

B

A

124.64-29/32

131.55-11/64

43.31-45/64



LINEAR = MMIN

DRAWN BY

J REHMCHECKED BY


S BOALDATE




TITLE


EO NUMBER: 5319

SCALE: 0.25

DO NOT SCALE PRINT

DRAWING NUMBER REV

5678451 1


B



1.88 X 12 PVC 340.813-27/64

47.61-7/8

1.66 X 12 316SST 340.813-27/64

42.21-21/32

1.66 X 24 316SST 645.625-27/64

42.21-21/32

ARM LENGTH DIM C

10 INCH 130.45-1/8

15 INCH 257.410-1/8


2" NPTM

1/4" NPTF

1

1

1

ISO-9001


101.64

101.64

73.02-7/8

222.38-3/4

205.88-7/64

53.22-3/32

97.63-27/32

20.251/64

C

B

A

124.64-29/32

131.55-11/64

43.31-45/64



LINEAR = MMIN

DRAWN BY

J REHMCHECKED BY


S BOALDATE




TITLE


EO NUMBER: 5319

SCALE: 0.25

DO NOT SCALE PRINT

DRAWING NUMBER REV

5678451 1


B



1.88 X 12 PVC 340.813-27/64

47.61-7/8

1.66 X 12 316SST 340.813-27/64

42.21-21/32

1.66 X 24 316SST 645.625-27/64

42.21-21/32

ARM LENGTH DIM C

10 INCH 130.45-1/8

15 INCH 257.410-1/8


2" NPTM

1/4" NPTF

1

1

1

1600 Sealed CaseLevel Controller

ISO-9001


101.64

101.64

73.02-7/8

222.38-3/4

205.88-7/64

53.22-3/32

97.63-27/32

20.251/64

C

B

A

124.64-29/32

131.55-11/64

43.31-45/64



LINEAR = MMIN

DRAWN BY

J REHMCHECKED BY


S BOALDATE




TITLE


EO NUMBER: 5319

SCALE: 0.25

DO NOT SCALE PRINT

DRAWING NUMBER REV

5678451 1


B



1.88 X 12 PVC 340.813-27/64

47.61-7/8

1.66 X 12 316SST 340.813-27/64

42.21-21/32

1.66 X 24 316SST 645.625-27/64

42.21-21/32

ARM LENGTH DIM C

10 INCH 130.45-1/8

15 INCH 257.410-1/8


2" NPTM

1/4" NPTF

1

1

1


Drawing 5678451

Dimensions



Dimensions

1600 SeriesLiquid Level ControllersDimensions in this catalog are for reference only. They may be changed without notice. Contact the factory for certified drawings for a particular model number. Dimensions are expressed as millimeters over inches (Linear = mm/in.)

Drawing 5678447

1600 Sealed Case FlangedLevel Controller

ISO-9001


A

E

205.88-3/32

97.63-27/32

222.38-3/4

73.02-7/8

101.64

50.82

D

C

124.64-29/32

20.613/16

131.95-3/16

B

99.23-29/32



LINEAR = MMIN

DRAWN BY

J REHMCHECKED BY


S BOALDATE




TITLE

DIM DWG 1600 SEALED CONTROLLER W/FLANGE PROCESS CONNECTION

EO NUMBER: 5341

SCALE: 0.25

DO NOT SCALE PRINT

DRAWING NUMBER REV

5678447 1


B


FLANGE DIM A DIM B

2" 150# RF 165.16-1/2 45

2" 300# RF 1736-13/16 22.5

2" 600# RF 182.67-3/16 22.5

2" 900# RTJ 204.78-1/16 22.5

2" 1500# RTJ 204.78-1/16 22.5

3" 150# RF 166.66-9/16 45

3" 300# RF 171.56-3/4 22.5

3" 600# RF 181.17-1/8 22.5

3" 900# RTJ 246.19-11/16 22.5

3" 1500# RTJ 261.910-5/16 22.5

4" 150# RF 166.66-9/16 22.5

4" 300# RF 174.86-7/8 22.5

4" 600# RF 190.57-1/2 22.5

4" 900# RTJ 258.810-3/16 22.5

4" 1500# RTJ 271.510-11/16 22.5

6" 150# RF 222.38-3/4 22.5

6" 300# RF 233.49-3/16 15

6" 600# RF 257.310-1/8 15

6" 900# RTJ 27010-5/8 15

6" 1500# RTJ 303.311-15/16 15

DISPLACER DIM C DIM D

1.88 X 12 PVC 340.813-27/64

47.61-7/8

1.66 X 12 316SST 340.813-27/64

42.21-21/32

1.66 X 24 316SST 645.625-27/64

42.21-21/32

ARM LENGTH DIM E

15 INCH 407.816-1/16

18 INCH 48419-1/16

20 INCH 534.821-1/16


1/4" NPTF

FLANGEPROCESSCONNECTION

1

1

1

ISO-9001


A

E

205.88-3/32

97.63-27/32

222.38-3/4

73.02-7/8

101.64

50.82

D

C

124.64-29/32

20.613/16

131.95-3/16

B

99.23-29/32



LINEAR = MMIN

DRAWN BY

J REHMCHECKED BY


S BOALDATE




TITLE


EO NUMBER: 5341

SCALE: 0.25

DO NOT SCALE PRINT

DRAWING NUMBER REV

5678447 1


B


FLANGE DIM A DIM B

2" 150# RF 165.16-1/2 45

2" 300# RF 1736-13/16 22.5

2" 600# RF 182.67-3/16 22.5

2" 900# RTJ 204.78-1/16 22.5

2" 1500# RTJ 204.78-1/16 22.5

3" 150# RF 166.66-9/16 45

3" 300# RF 171.56-3/4 22.5

3" 600# RF 181.17-1/8 22.5

3" 900# RTJ 246.19-11/16 22.5

3" 1500# RTJ 261.910-5/16 22.5

4" 150# RF 166.66-9/16 22.5

4" 300# RF 174.86-7/8 22.5

4" 600# RF 190.57-1/2 22.5

4" 900# RTJ 258.810-3/16 22.5

4" 1500# RTJ 271.510-11/16 22.5

6" 150# RF 222.38-3/4 22.5

6" 300# RF 233.49-3/16 15

6" 600# RF 257.310-1/8 15

6" 900# RTJ 27010-5/8 15

6" 1500# RTJ 303.311-15/16 15


1.88 X 12 PVC 340.813-27/64

47.61-7/8

1.66 X 12 316SST 340.813-27/64

42.21-21/32

1.66 X 24 316SST 645.625-27/64

42.21-21/32

ARM LENGTH DIM E

15 INCH 407.816-1/16

18 INCH 48419-1/16

20 INCH 534.821-1/16


1/4" NPTF


1

1

1

ISO-9001


A

E

205.88-3/32

97.63-27/32

222.38-3/4

73.02-7/8

101.64

50.82

D

C

124.64-29/32

20.613/16

131.95-3/16

B

99.23-29/32



LINEAR = MMIN

DRAWN BY

J REHMCHECKED BY


S BOALDATE




TITLE


EO NUMBER: 5341

SCALE: 0.25

DO NOT SCALE PRINT

DRAWING NUMBER REV

5678447 1


B


FLANGE DIM A DIM B

2" 150# RF 165.16-1/2 45

2" 300# RF 1736-13/16 22.5

2" 600# RF 182.67-3/16 22.5

2" 900# RTJ 204.78-1/16 22.5

2" 1500# RTJ 204.78-1/16 22.5

3" 150# RF 166.66-9/16 45

3" 300# RF 171.56-3/4 22.5

3" 600# RF 181.17-1/8 22.5

3" 900# RTJ 246.19-11/16 22.5

3" 1500# RTJ 261.910-5/16 22.5

4" 150# RF 166.66-9/16 22.5

4" 300# RF 174.86-7/8 22.5

4" 600# RF 190.57-1/2 22.5

4" 900# RTJ 258.810-3/16 22.5

4" 1500# RTJ 271.510-11/16 22.5

6" 150# RF 222.38-3/4 22.5

6" 300# RF 233.49-3/16 15

6" 600# RF 257.310-1/8 15

6" 900# RTJ 27010-5/8 15

6" 1500# RTJ 303.311-15/16 15


1.88 X 12 PVC 340.813-27/64

47.61-7/8

1.66 X 12 316SST 340.813-27/64

42.21-21/32

1.66 X 24 316SST 645.625-27/64

42.21-21/32

ARM LENGTH DIM E

15 INCH 407.816-1/16

18 INCH 48419-1/16

20 INCH 534.821-1/16


1/4" NPTF


1

1

1

ISO-9001


A

E

205.88-3/32

97.63-27/32

222.38-3/4

73.02-7/8

101.64

50.82

D

C

124.64-29/32

20.613/16

131.95-3/16

B

99.23-29/32



LINEAR = MMIN

DRAWN BY

J REHMCHECKED BY


S BOALDATE




TITLE


EO NUMBER: 5341

SCALE: 0.25

DO NOT SCALE PRINT

DRAWING NUMBER REV

5678447 1


B


FLANGE DIM A DIM B

2" 150# RF 165.16-1/2 45

2" 300# RF 1736-13/16 22.5

2" 600# RF 182.67-3/16 22.5

2" 900# RTJ 204.78-1/16 22.5

2" 1500# RTJ 204.78-1/16 22.5

3" 150# RF 166.66-9/16 45

3" 300# RF 171.56-3/4 22.5

3" 600# RF 181.17-1/8 22.5

3" 900# RTJ 246.19-11/16 22.5

3" 1500# RTJ 261.910-5/16 22.5

4" 150# RF 166.66-9/16 22.5

4" 300# RF 174.86-7/8 22.5

4" 600# RF 190.57-1/2 22.5

4" 900# RTJ 258.810-3/16 22.5

4" 1500# RTJ 271.510-11/16 22.5

6" 150# RF 222.38-3/4 22.5

6" 300# RF 233.49-3/16 15

6" 600# RF 257.310-1/8 15

6" 900# RTJ 27010-5/8 15

6" 1500# RTJ 303.311-15/16 15


1.88 X 12 PVC 340.813-27/64

47.61-7/8

1.66 X 12 316SST 340.813-27/64

42.21-21/32

1.66 X 24 316SST 645.625-27/64

42.21-21/32

ARM LENGTH DIM E

15 INCH 407.816-1/16

18 INCH 48419-1/16

20 INCH 534.821-1/16


1/4" NPTF


1

1

1

ISO-9001


A

E

205.88-3/32

97.63-27/32

222.38-3/4

73.02-7/8

101.64

50.82

D

C

124.64-29/32

20.613/16

131.95-3/16

B

99.23-29/32



LINEAR = MMIN

DRAWN BY

J REHMCHECKED BY


S BOALDATE




TITLE


EO NUMBER: 5341

SCALE: 0.25

DO NOT SCALE PRINT

DRAWING NUMBER REV

5678447 1


B


FLANGE DIM A DIM B

2" 150# RF 165.16-1/2 45

2" 300# RF 1736-13/16 22.5

2" 600# RF 182.67-3/16 22.5

2" 900# RTJ 204.78-1/16 22.5

2" 1500# RTJ 204.78-1/16 22.5

3" 150# RF 166.66-9/16 45

3" 300# RF 171.56-3/4 22.5

3" 600# RF 181.17-1/8 22.5

3" 900# RTJ 246.19-11/16 22.5

3" 1500# RTJ 261.910-5/16 22.5

4" 150# RF 166.66-9/16 22.5

4" 300# RF 174.86-7/8 22.5

4" 600# RF 190.57-1/2 22.5

4" 900# RTJ 258.810-3/16 22.5

4" 1500# RTJ 271.510-11/16 22.5

6" 150# RF 222.38-3/4 22.5

6" 300# RF 233.49-3/16 15

6" 600# RF 257.310-1/8 15

6" 900# RTJ 27010-5/8 15

6" 1500# RTJ 303.311-15/16 15


1.88 X 12 PVC 340.813-27/64

47.61-7/8

1.66 X 12 316SST 340.813-27/64

42.21-21/32

1.66 X 24 316SST 645.625-27/64

42.21-21/32

ARM LENGTH DIM E

15 INCH 407.816-1/16

18 INCH 48419-1/16

20 INCH 534.821-1/16


1/4" NPTF


1

1

1

ISO-9001


A

E

205.88-3/32

97.63-27/32

222.38-3/4

73.02-7/8

101.64

50.82

D

C

124.64-29/32

20.613/16

131.95-3/16

B

99.23-29/32



LINEAR = MMIN

DRAWN BY

J REHMCHECKED BY


S BOALDATE




TITLE


EO NUMBER: 5341

SCALE: 0.25

DO NOT SCALE PRINT

DRAWING NUMBER REV

5678447 1


B


FLANGE DIM A DIM B

2" 150# RF 165.16-1/2 45

2" 300# RF 1736-13/16 22.5

2" 600# RF 182.67-3/16 22.5

2" 900# RTJ 204.78-1/16 22.5

2" 1500# RTJ 204.78-1/16 22.5

3" 150# RF 166.66-9/16 45

3" 300# RF 171.56-3/4 22.5

3" 600# RF 181.17-1/8 22.5

3" 900# RTJ 246.19-11/16 22.5

3" 1500# RTJ 261.910-5/16 22.5

4" 150# RF 166.66-9/16 22.5

4" 300# RF 174.86-7/8 22.5

4" 600# RF 190.57-1/2 22.5

4" 900# RTJ 258.810-3/16 22.5

4" 1500# RTJ 271.510-11/16 22.5

6" 150# RF 222.38-3/4 22.5

6" 300# RF 233.49-3/16 15

6" 600# RF 257.310-1/8 15

6" 900# RTJ 27010-5/8 15

6" 1500# RTJ 303.311-15/16 15


1.88 X 12 PVC 340.813-27/64

47.61-7/8

1.66 X 12 316SST 340.813-27/64

42.21-21/32

1.66 X 24 316SST 645.625-27/64

42.21-21/32

ARM LENGTH DIM E

15 INCH 407.816-1/16

18 INCH 48419-1/16

20 INCH 534.821-1/16


1/4" NPTF


1

1

1




ISO-9001


C53.32-3/32

205.68-3/32

222.38-3/4

97.63-27/32

25.41

69.12-23/32

152.56

16.441/64

42.91-11/16

109.44-5/16

124.64-29/32

A

B



LINEAR = MMIN

DRAWN BY

J REHMCHECKED BY


S BOALDATE




TITLE

DIM DWG 1601 STANDARD CONTROLLER

EO NUMBER: 5319

SCALE: 0.25

DO NOT SCALE PRINT

DRAWING NUMBER REV

5678450 1


B


ARM LENGTH DIM C

10 INCH 130.45-1/8

15 INCH 257.410-1/8


1.88 X 12 PVC 340.813-27/64

47.61-7/8

1.66 X 12 316SST 340.813-27/64

42.21-21/32

1.66 X 24 316SST 645.625-27/64

42.21-21/32


2" NPTM

1/4" NPTF

1

1

1

ISO-9001


C53.32-3/32

205.68-3/32

222.38-3/4

97.63-27/32

25.41

69.12-23/32

152.56

16.441/64

42.91-11/16

109.44-5/16

124.64-29/32

A

B



LINEAR = MMIN

DRAWN BY

J REHMCHECKED BY


S BOALDATE




TITLE


EO NUMBER: 5319

SCALE: 0.25

DO NOT SCALE PRINT

DRAWING NUMBER REV

5678450 1


B


ARM LENGTH DIM C

10 INCH 130.45-1/8

15 INCH 257.410-1/8


1.88 X 12 PVC 340.813-27/64

47.61-7/8

1.66 X 12 316SST 340.813-27/64

42.21-21/32

1.66 X 24 316SST 645.625-27/64

42.21-21/32


2" NPTM

1/4" NPTF

1

1

1

ISO-9001


C53.32-3/32

205.68-3/32

222.38-3/4

97.63-27/32

25.41

69.12-23/32

152.56

16.441/64

42.91-11/16

109.44-5/16

124.64-29/32

A

B



LINEAR = MMIN

DRAWN BY

J REHMCHECKED BY


S BOALDATE




TITLE


EO NUMBER: 5319

SCALE: 0.25

DO NOT SCALE PRINT

DRAWING NUMBER REV

5678450 1


B


ARM LENGTH DIM C

10 INCH 130.45-1/8

15 INCH 257.410-1/8


1.88 X 12 PVC 340.813-27/64

47.61-7/8

1.66 X 12 316SST 340.813-27/64

42.21-21/32

1.66 X 24 316SST 645.625-27/64

42.21-21/32


2" NPTM

1/4" NPTF

1

1

1

ISO-9001


C53.32-3/32

205.68-3/32

222.38-3/4

97.63-27/32

25.41

69.12-23/32

152.56

16.441/64

42.91-11/16

109.44-5/16

124.64-29/32

A

B



LINEAR = MMIN

DRAWN BY

J REHMCHECKED BY


S BOALDATE




TITLE


EO NUMBER: 5319

SCALE: 0.25

DO NOT SCALE PRINT

DRAWING NUMBER REV

5678450 1


B


ARM LENGTH DIM C

10 INCH 130.45-1/8

15 INCH 257.410-1/8


1.88 X 12 PVC 340.813-27/64

47.61-7/8

1.66 X 12 316SST 340.813-27/64

42.21-21/32

1.66 X 24 316SST 645.625-27/64

42.21-21/32


2" NPTM

1/4" NPTF

1

1

1

1601 Standard CaseLevel Controller

ISO-9001


C53.32-3/32

205.68-3/32

222.38-3/4

97.63-27/32

25.41

69.12-23/32

152.56

16.441/64

42.91-11/16

109.44-5/16

124.64-29/32

A

B



LINEAR = MMIN

DRAWN BY

J REHMCHECKED BY


S BOALDATE




TITLE


EO NUMBER: 5319

SCALE: 0.25

DO NOT SCALE PRINT

DRAWING NUMBER REV

5678450 1


B


ARM LENGTH DIM C

10 INCH 130.45-1/8

15 INCH 257.410-1/8


1.88 X 12 PVC 340.813-27/64

47.61-7/8

1.66 X 12 316SST 340.813-27/64

42.21-21/32

1.66 X 24 316SST 645.625-27/64

42.21-21/32


2" NPTM

1/4" NPTF

1

1

1


Drawing 5678450

Dimensions



Dimensions

1600 SeriesLiquid Level ControllersDimensions in this catalog are for reference only. They may be changed without notice. Contact the factory for certified drawings for a particular model number. Dimensions are expressed as millimeters over inches (Linear = mm/in.)

Drawing 5678446

1601 Standard Case Flanged Level Controller

ISO-9001


A

205.68-3/32

222.28-3/4

97.63-27/32

69.12-23/32

25.41

C

124.64-29/32

16.441/64

109.44-5/16

D

B

E

99.23-29/32



LINEAR = MMIN

DRAWN BY

J REHMCHECKED BY


S BOALDATE




TITLE

DIM DWG 1601 STANDARD CONTROLLER W/FLANGEPROCESS CONNECTION

EO NUMBER: 5341

SCALE: 0.25

DO NOT SCALE PRINT

DRAWING NUMBER REV

5678446 1


B


FLANGE DIM A DIM B

2" 150# RF 165.16-1/2 45

2" 300# RF 1736-13/16 22.5

2" 600# RF 182.67-3/16 22.5

2" 900# RTJ 204.78-1/16 22.5

2" 1500# RTJ 204.78-1/16 22.5

3" 150# RF 166.66-9/16 45

3" 300# RF 171.56-3/4 22.5

3" 600# RF 181.17-1/8 22.5

3" 900# RTJ 246.19-11/16 22.5

3" 1500# RTJ 261.910-5/16 22.5

4" 150# RF 166.66-9/16 22.5

4" 300# RF 174.86-7/8 22.5

4" 600# RF 190.57-1/2 22.5

4" 900# RTJ 258.810-3/16 22.5

4" 1500# RTJ 271.510-11/16 22.5

6" 150# RF 222.38-3/4 22.5

6" 300# RF 233.49-3/16 15

6" 600# RF 257.310-1/8 15

6" 900# RTJ 27010-5/8 15

6" 1500# RTJ 303.311-15/16 15

ARM LENGTH DIM E

15 INCH 407.816-1/16

18 INCH 48419-1/16

20 INCH 534.821-1/16


1.88 X 12 PVC 340.813-27/64

47.61-7/8

1.66 X 12 316SST 340.813-27/64

42.21-21/32

1.66 X 24 316SST 645.625-27/64

42.21-21/32


1/4" NPTF


1

1

1

ISO-9001


A

205.68-3/32

222.28-3/4

97.63-27/32

69.12-23/32

25.41

C

124.64-29/32

16.441/64

109.44-5/16

D

B

E

99.23-29/32



LINEAR = MMIN

DRAWN BY

J REHMCHECKED BY


S BOALDATE




TITLE


EO NUMBER: 5341

SCALE: 0.25

DO NOT SCALE PRINT

DRAWING NUMBER REV

5678446 1


B


FLANGE DIM A DIM B

2" 150# RF 165.16-1/2 45

2" 300# RF 1736-13/16 22.5

2" 600# RF 182.67-3/16 22.5

2" 900# RTJ 204.78-1/16 22.5

2" 1500# RTJ 204.78-1/16 22.5

3" 150# RF 166.66-9/16 45

3" 300# RF 171.56-3/4 22.5

3" 600# RF 181.17-1/8 22.5

3" 900# RTJ 246.19-11/16 22.5

3" 1500# RTJ 261.910-5/16 22.5

4" 150# RF 166.66-9/16 22.5

4" 300# RF 174.86-7/8 22.5

4" 600# RF 190.57-1/2 22.5

4" 900# RTJ 258.810-3/16 22.5

4" 1500# RTJ 271.510-11/16 22.5

6" 150# RF 222.38-3/4 22.5

6" 300# RF 233.49-3/16 15

6" 600# RF 257.310-1/8 15

6" 900# RTJ 27010-5/8 15

6" 1500# RTJ 303.311-15/16 15

ARM LENGTH DIM E

15 INCH 407.816-1/16

18 INCH 48419-1/16

20 INCH 534.821-1/16


1.88 X 12 PVC 340.813-27/64

47.61-7/8

1.66 X 12 316SST 340.813-27/64

42.21-21/32

1.66 X 24 316SST 645.625-27/64

42.21-21/32


1/4" NPTF


1

1

1

ISO-9001


A

205.68-3/32

222.28-3/4

97.63-27/32

69.12-23/32

25.41

C

124.64-29/32

16.441/64

109.44-5/16

D

B

E

99.23-29/32



LINEAR = MMIN

DRAWN BY

J REHMCHECKED BY


S BOALDATE




TITLE


EO NUMBER: 5341

SCALE: 0.25

DO NOT SCALE PRINT

DRAWING NUMBER REV

5678446 1


B


FLANGE DIM A DIM B

2" 150# RF 165.16-1/2 45

2" 300# RF 1736-13/16 22.5

2" 600# RF 182.67-3/16 22.5

2" 900# RTJ 204.78-1/16 22.5

2" 1500# RTJ 204.78-1/16 22.5

3" 150# RF 166.66-9/16 45

3" 300# RF 171.56-3/4 22.5

3" 600# RF 181.17-1/8 22.5

3" 900# RTJ 246.19-11/16 22.5

3" 1500# RTJ 261.910-5/16 22.5

4" 150# RF 166.66-9/16 22.5

4" 300# RF 174.86-7/8 22.5

4" 600# RF 190.57-1/2 22.5

4" 900# RTJ 258.810-3/16 22.5

4" 1500# RTJ 271.510-11/16 22.5

6" 150# RF 222.38-3/4 22.5

6" 300# RF 233.49-3/16 15

6" 600# RF 257.310-1/8 15

6" 900# RTJ 27010-5/8 15

6" 1500# RTJ 303.311-15/16 15

ARM LENGTH DIM E

15 INCH 407.816-1/16

18 INCH 48419-1/16

20 INCH 534.821-1/16


1.88 X 12 PVC 340.813-27/64

47.61-7/8

1.66 X 12 316SST 340.813-27/64

42.21-21/32

1.66 X 24 316SST 645.625-27/64

42.21-21/32


1/4" NPTF


1

1

1

ISO-9001


A

205.68-3/32

222.28-3/4

97.63-27/32

69.12-23/32

25.41

C

124.64-29/32

16.441/64

109.44-5/16

D

B

E

99.23-29/32



LINEAR = MMIN

DRAWN BY

J REHMCHECKED BY


S BOALDATE




TITLE


EO NUMBER: 5341

SCALE: 0.25

DO NOT SCALE PRINT

DRAWING NUMBER REV

5678446 1


B


FLANGE DIM A DIM B

2" 150# RF 165.16-1/2 45

2" 300# RF 1736-13/16 22.5

2" 600# RF 182.67-3/16 22.5

2" 900# RTJ 204.78-1/16 22.5

2" 1500# RTJ 204.78-1/16 22.5

3" 150# RF 166.66-9/16 45

3" 300# RF 171.56-3/4 22.5

3" 600# RF 181.17-1/8 22.5

3" 900# RTJ 246.19-11/16 22.5

3" 1500# RTJ 261.910-5/16 22.5

4" 150# RF 166.66-9/16 22.5

4" 300# RF 174.86-7/8 22.5

4" 600# RF 190.57-1/2 22.5

4" 900# RTJ 258.810-3/16 22.5

4" 1500# RTJ 271.510-11/16 22.5

6" 150# RF 222.38-3/4 22.5

6" 300# RF 233.49-3/16 15

6" 600# RF 257.310-1/8 15

6" 900# RTJ 27010-5/8 15

6" 1500# RTJ 303.311-15/16 15

ARM LENGTH DIM E

15 INCH 407.816-1/16

18 INCH 48419-1/16

20 INCH 534.821-1/16


1.88 X 12 PVC 340.813-27/64

47.61-7/8

1.66 X 12 316SST 340.813-27/64

42.21-21/32

1.66 X 24 316SST 645.625-27/64

42.21-21/32


1/4" NPTF


1

1

1

ISO-9001


A

205.68-3/32

222.28-3/4

97.63-27/32

69.12-23/32

25.41

C

124.64-29/32

16.441/64

109.44-5/16

D

B

E

99.23-29/32



LINEAR = MMIN

DRAWN BY

J REHMCHECKED BY


S BOALDATE




TITLE


EO NUMBER: 5341

SCALE: 0.25

DO NOT SCALE PRINT

DRAWING NUMBER REV

5678446 1


B


FLANGE DIM A DIM B

2" 150# RF 165.16-1/2 45

2" 300# RF 1736-13/16 22.5

2" 600# RF 182.67-3/16 22.5

2" 900# RTJ 204.78-1/16 22.5

2" 1500# RTJ 204.78-1/16 22.5

3" 150# RF 166.66-9/16 45

3" 300# RF 171.56-3/4 22.5

3" 600# RF 181.17-1/8 22.5

3" 900# RTJ 246.19-11/16 22.5

3" 1500# RTJ 261.910-5/16 22.5

4" 150# RF 166.66-9/16 22.5

4" 300# RF 174.86-7/8 22.5

4" 600# RF 190.57-1/2 22.5

4" 900# RTJ 258.810-3/16 22.5

4" 1500# RTJ 271.510-11/16 22.5

6" 150# RF 222.38-3/4 22.5

6" 300# RF 233.49-3/16 15

6" 600# RF 257.310-1/8 15

6" 900# RTJ 27010-5/8 15

6" 1500# RTJ 303.311-15/16 15

ARM LENGTH DIM E

15 INCH 407.816-1/16

18 INCH 48419-1/16

20 INCH 534.821-1/16


1.88 X 12 PVC 340.813-27/64

47.61-7/8

1.66 X 12 316SST 340.813-27/64

42.21-21/32

1.66 X 24 316SST 645.625-27/64

42.21-21/32


1/4" NPTF


1

1

1

ISO-9001


A

205.68-3/32

222.28-3/4

97.63-27/32

69.12-23/32

25.41

C

124.64-29/32

16.441/64

109.44-5/16

D

B

E

99.23-29/32



LINEAR = MMIN

DRAWN BY

J REHMCHECKED BY


S BOALDATE




TITLE


EO NUMBER: 5341

SCALE: 0.25

DO NOT SCALE PRINT

DRAWING NUMBER REV

5678446 1


B


FLANGE DIM A DIM B

2" 150# RF 165.16-1/2 45

2" 300# RF 1736-13/16 22.5

2" 600# RF 182.67-3/16 22.5

2" 900# RTJ 204.78-1/16 22.5

2" 1500# RTJ 204.78-1/16 22.5

3" 150# RF 166.66-9/16 45

3" 300# RF 171.56-3/4 22.5

3" 600# RF 181.17-1/8 22.5

3" 900# RTJ 246.19-11/16 22.5

3" 1500# RTJ 261.910-5/16 22.5

4" 150# RF 166.66-9/16 22.5

4" 300# RF 174.86-7/8 22.5

4" 600# RF 190.57-1/2 22.5

4" 900# RTJ 258.810-3/16 22.5

4" 1500# RTJ 271.510-11/16 22.5

6" 150# RF 222.38-3/4 22.5

6" 300# RF 233.49-3/16 15

6" 600# RF 257.310-1/8 15

6" 900# RTJ 27010-5/8 15

6" 1500# RTJ 303.311-15/16 15

ARM LENGTH DIM E

15 INCH 407.816-1/16

18 INCH 48419-1/16

20 INCH 534.821-1/16


1.88 X 12 PVC 340.813-27/64

47.61-7/8

1.66 X 12 316SST 340.813-27/64

42.21-21/32

1.66 X 24 316SST 645.625-27/64

42.21-21/32


1/4" NPTF


1

1

1


Separator Control with liquid level control and dump valve

Engineering

Transcript of Separator Control with liquid level control and dump valve