The CoDeSys Visualization - ifm electronic gmbh - automation made
Sensors for Food Automation - ifm electronic gmbh - automation
Transcript of Sensors for Food Automation - ifm electronic gmbh - automation
ww
w.if
m.c
om
Sensors for Food Automation
ifm efector – close to you!
1
Inductive sensors 16 - 21
Magnetic sensors 22 - 25
Cylinder sensors 26 - 27
Company information 2 - 7
Solutions for food and beverage applications 8 - 13
Food specific approvals and testing 14 - 15
Safety technology 46 - 51
Valve position sensors
28 - 33Photoelectric sensors
34 - 39
Vision sensors 40 - 45
Flow sensors and meters 60 - 61
Pressure sensors and transmitters 52 - 59
Temperature sensors and transmitters 62 - 69
Level sensors 70 - 71
Diagnostic systems 86 - 91
Identification systems 84 - 85
Cordsets and patchcords 92 - 95
Bus system AS-interface 72 - 83
Business policies 96
Sensors and controls for food automation
ifm people. The ifm team of employees is committed to helping you succeed in your business.We directly service and work with over 90,000 customers.
ifm products. For over 40 years, ifm has developed, manufactured, and marketed sensors tothe food and beverage industry. We offer a complete family of process instruments, positionsensors, fluid sensors, diagnostic systems, networking products, and wiring solutions.
Quality. There can be no compromise in the quality and reliability of sensors that are applied in your production facility. The ifm new product development process incorporates specific testsfor the food and beverage industry. The accuracy, drift, and repeatability of our sensors aretested in thermal shock and high pressure cleaning conditions.
Investment in R&D. Developing new products that increase uptime and productivity is a core belief of our company. We apply practical innovation to simplify technology and developproducts that can have a positive impact on your production process.
Application know-how. We have over 40 years of experience in working with the food andbeverage industry. Our knowledgeable team of technical support engineers will work with youto recommend the right solution, the first time.
ifm business philosophy. ifm provides a knowledgeable and courteous service center team to assist with order placement and technical support. We offer an efficient distribution centerfor accurate and on-time delivery of products. ifm publishes list prices in literature and on ourwebsite, and we always stand behind the quality and performance of our products.
Global presence with local focus. With more than 4,300 dedicated ifm employees in over 70 countries, you can count on local support all over the world.
About ifm…
ifm is one of the world’s
largest manufacturers of
industrial sensors and controls
products, producing over
5 million sensors annually.
More than 3,500 ifm
employees serve over 90,000
purchasing customers
worldwide.
ifm has more than 70
subsidiaries located in all
major countries.
Annual global sales exceed
$624 million USD.
Our dedication to innovation,
quality and customer support
has made us a global market
leader.
The ifm commitment
3
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Our Vision: To be the premier technology partner for sensors and controls.
Position sensors
• Inductive proximity sensors• Magnetic proximity sensors • Cylinder and valve position sensors• Photoelectric sensors
Vision sensors
• Multi-code readers• efector dualis inspection sensors• 3D level sensors
Safety products
• Inductive safety sensors• Safety relays• Safety light curtains and grids
Wiring solutions
• Controllers and gateways• Power supplies• AS-i networking• Cordsets
Fluid and diagnostic sensors
• Pressure sensors and transmitters• Flow sensors and meters• Temperature sensors and transmitters• Level sensors• Diagnostic systems
Reliable Products… Innovative Design
ifm offers a broad product range that includes sensorsand controls for food and beverage applications.
ifm’s core competency for industrial product design isto develop products with robust housings, easy userinterfaces and flexible output stages.
ifm makes large investments in R&D and employsover 400 development engineers.
Our R&D team has more than 500 registered ifmpatents worldwide.
ifm has received multiple awards for innovation andbreakthrough technologies.
Parameters tested
As an ISO 9001:2008 compliant company, ifm efector performs extensive testing to insurereliable performance. Tests include:
Sensing range characteristics
Electrical parameters
Seal integrity
Leakage current
Display and LED function
Hysteresis
Voltage drop
Insulation using high voltage (2700 AC)
Operating current in the open and closed state
High performance products that increase uptime and productivity
4 www.ifm.com
Rich History… Promising Future
ifm electronic, the parent company ofifm efector, was founded in 1969.
For over 40 years, ifm has manufacturedand marketed electronic sensors andcontrols for food and beverageapplications.
ifm employs over 4,300 dedicatedindividuals who provide outstandingproduct support and technical service.
More than 100,000 customers purchaseifm products worldwide.
ifm is currently one of the world’slargest manufacturers of industrial sensors and controls, producing over 5 million sensors annually.
Global Support... Local Presence
ifm North America, established in 1985,has a network of sales offices located inall major industrial markets throughoutthe US, Canada and Mexico.
The ifm Direct Sales Team provides on-site application assistance and technicalsupport throughout North America.
The ifm Service Center is staffed byapplication engineers and customerservice representatives who provide support from 7:30 am to 7:00 pm ESTto ensure time-zone coverage.
Our dedication to innovation, qualityand customer support has made ifm aglobal leader in sensors and controls.
ifm efector CanadaToronto, Canada
ifm efector USAExton, PA
ifm efector MexicoMonterrey, Mexico
ifm North American Operation
ifm Worldwide Support
Whether you ship your machines internationallyor have manufacturing plants all over the world,ifm has local support in over 70 countries.
You can count on ifm anywhere in the world!
Our people and our products are committed to helping you succeed in your business
ifm efector – close to you!
Company
5www.ifm.com
Logistics
On-time delivery with accuracy of your order is ourgoal in the ifm Distribution Center. There can be nocompromises when it comes to uptime in your facility.
The ifm Distribution Center is located inDowningtown, PA, just outside Philadelphia. Morethan 10,000 orders are shipped per month with anaccuracy rate of 99.9%.
Service Center
You can count on our Service Center team to be areliable partner. That means easy order placement andknowledgeable technical support.
Our Service Center team includes applicationengineers who can assist with technical questions andapplication solutions. ifm customer service representa-tives can assist with order placement, product quotes,and delivery information.
ReliableService Center
Dedicated Sales Engineers
On-Site Sales Support
You can count on our experienced team of ifm sales engineers to understand your applications andchallenges.
Our sales engineers work with corporations to coordi-nate global projects and to develop sensor standardsthat result in reducing inventory costs and simplifyingmaintenance.
Our Mission
We contribute to our customers’ success by providing innovativesolutions through continuous developmentof our people, productsand processes.
The ifm Advantage
ifm has built a business model that focuses onworking directly withour customers.
There are no compro-mises when it comes toour customers’ success.
Reliable customer service and supportfrom a dedicated ifm team
Research and Development
The ifm product development engineers designand test sensors in conditions that far exceedactual application environments. There can be no compromises when it comes to uptime in your facility.
Our team designs products that reduce machinedowntime, increase productivity and simplifyinstallation.
On-time DeliverywithAccuracy
R&D thatDelivers Solutions
ifm efector’s CustomerSupport Network isdesigned to provide you with technical support and applicationsolutions anywhere inNorth America.
For immediate service,call 800-441-8246.
Company
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
6
Company
www.ifm.com
Content-rich website with search tools to help you find the right products quickly
ifm’s award-winning website offers a comprehen-sive product offering displayed in a concise layoutfor easy navigation. Users can take advantage ofmultiple search tools that expedite quick productsearches either by application or by specification.Users can also view products by specific industrybuying patterns.
The one-stop-shopping layout ensures that a usercan find a product and its required accessories onone page. Data sheets, CAD drawings and instal-lation instructions are linked to every product, inmultiple languages.
In the US: www.ifm.com/us
In Canada: www.ifm.com/ca
In Mexico: www.ifm.com/mx
Product e-Catalog
Save time and quickly find products for your applications with ifm’s easy-to-use Product e-Catalog. The e-Catalog offers simple navigation and features ifm’s completeproduct family at-a-glance. Once you select your product family, your search isnarrowed down by application environment and by housing size.
Top Sellers
Want to know the top-selling sensor solutions in your industry? The Top Sellers tooloffers a list of top-selling products for various applications within an industry. Resultsare based on buying patterns of over 20,000 ifm customers in the US.
Product Selector
Streamline your product search with Selector. Simply select your preferred output,voltage, sensing range and other sensing parameters until the recommended sensorappears. Selector’s “Compare” feature allows you to see two products side-by-side for comparison.
Summary Specs for Project and Estimate Bids
Summer Specs provides all the information required to take a project from bid… todesign… to final build. Whether you're a machine builder, integrator or engineeringfirm, ifm’s Summary Specs makes it easy for you to apply our products throughout thedesign process. Compile information easily – cut and paste technical data, downloadscale drawings, and attach installation instructions available in multiple languages forproducts that cross international borders.
c a t a l o g
o pse l l e r s
se l e c t o r
p e c sSS
7
Company
www.ifm.com
Order online... it’s convenient, quick and easy to use
Purchase sensors and controls using e-Shop
From our website to your plant, use e-Shop to purchase sensors and controls… It’s easy!
• Available 24 hours a day.
• Choose from more than 5,000 sensors and controls products.
• Create your personal Favorites list of products.
• Store your favorites for future use.
• Use the 'Quick Order' feature for regularly ordered products.
• Orders are shipped from our central warehouse. Select your preferred shippingmethod – UPS or FedEx.
• For your convenience, supply your company shipping account number.
• Select your payment method - credit card (American Express, Visa or MasterCard)or Purchase Order number.
• Shipping confirmations are emailed to you with tracking number.
• Track the status of your online purchase via My History.
• ifm products are backed with 2-year and 5-year warranties.
From our website to your plant, use e-Shop to purchase sensors and controls… It’s easy!
Orders are shipped from our centralwarehouse. Select your preferredshipping method – UPS or FedEx.
e-Shop is available 24 hours a day. Choose from more than5,000 sensors and controls products.
In the US: www.ifm.com/us/eshop
In Canada: www.ifm.com/ca/eshop
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
8
Solutions for food and beverage applications
www.ifm.com
Magnetic sensors detect U-tubeposition in flow diverter panels
ifm magnetic sensors detect a magnetthrough a stainless steel plate to sensethe U-tube position on a flow diverterpanel. Magnetic sensors offer extremelylong sensing ranges – up to 70mm – and high switching frequencies.
See pages 22 - 25
Quarter-turn valve position in tank farms and valve skids
Quarter-turn actuators are used forprocess control in tank farms, divertervalves, and valves skids. ifm’s valveposition sensor and rotating targetpuck are mounted on top of an actua-tor to indicate the open and closedposition of a valve. Non-contact sensingprovides long life-in-application.
See pages 34 - 37
Cylinder sensors detect piston position in pneumatic cylinders
Pneumatic cylinders are used in manyareas of the food industry. ifm cylinderposition sensors reliably detect pistonposition through the cylinder housingwall. The sensors feature durable housings with an IP69K protection rating that resists liquid ingress. Thesensors easily mount to smoothcylinders using ifm’s adapter system.
See pages 26 - 27
Fail-safe sensors detect manwaydoor position for safe access to tank
ifm’s fail-safe inductive sensors detect the open and closed position of astainless steel manway door. The fail-safesensors help prevent access to a tankwhile in operation. ifm’s fail-safe sensorsdo not require coded magnets or mech-anical keys which reduces installationtime and misalignment issues. The sensors are rated up to SIL 2 or SIL 3according to IEC 61508.
See pages 46 - 47
9
Solutions for food and beverage applications
www.ifm.com
Photoelectrics provide positiondetection in packaging applications
ifm’s OG Series photoelectrics aredesigned to withstand washdownenvironments in food packagingapplications. The industry standard 18 mm diameter housings are 316stainless steel and resistant to chemicalsolutions used in cleaning. The sensor’szero-leak design prevents liquid ingress.
See pages 28 - 29
Photoelectrics provide clear objectdetection in packaging lines
One of the most difficult photoelectricapplications is the detection of clearobjects such as PET bottles. Standardsensors typically have too much excessgain and burn through the clear material. ifm’s O5 Series clear objectsensor offers reliable detection of transparent objects and an extremelylong sensing range – up to 1.5 meterswhen used with an ifm reflector.
See pages 32 - 33
Photoelectrics withstand aggressivecleaning cycles in food production
In food production, the use of harshchemicals during cleaning cycles iscommon. The Ecolab-certified OGSeries photoelectric sensors resistchemicals and aggressive cleaningagents. The sensor’s plastic lens eliminates the possibility of glasssplintering in food and beverageingredients during production.
See pages 28 - 29
Rising stem valve sensors offer continuous feedback of valves
Valve manifolds offer a number of filling and emptying routes withoutmanually opening pipes or recouplingpanels. ifm’s 316 stainless steel inductive sensors are used to detect theopen and closed position of the valve.The sensor’s FDA-approved PEEK sens-ing face material is resistant to extremetemperature fluctuations.
See pages 18 - 19
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
10
Solutions for food and beverage applications
www.ifm.com
Flow sensors monitor pumps to prevent run-dry conditions
Conveying liquids and liquid food suchas dairy products and beveragesrequires proper flow monitoring. ifm’sSI Series flow sensors can monitor apump to provide run-dry protection.The sensor’s stainless steel probe has nomoving parts that can stick or break inthe process.
See pages 60 - 61
Pressure sensors monitor line pressure to keg cleaning machine
Kegs require cleaning before they arefilled with beverages. ifm’s PI Series andPG Series pressure sensors monitor thecorrect pressure of the cleaning agent.The sensor’s 4-digit numeric displayindicates system pressure and its push-button setup reduces installation time.
See pages 52 - 59
Pressure sensors detect line pressure to homogenizers
In dairy applications, homogenization is used to process milk fat globules intoa uniform consistency. The ifm PYSeries pressure sensor is designed tomonitor line pressure to the homoge-nizer. The sensor features simple push-button setup and an integrated built-indisplay that eliminates the need for agauge.
See pages 56 - 57
Pressure sensors monitor level invarious storage and mixing tanks
To monitor level in storage tanks, silotanks, mixing tanks, and process tanks,ifm’s PI Series and PG Series pressuresensors are an ideal solution. Theweight of the liquid creates pressure onthe sensor’s diaphragm. As the levelchanges, the pressure output changesproviding reliable and highly accuratepressure indication.
See pages 52 - 55
11
Solutions for food and beverage applications
www.ifm.com
Pressure sensors indicate line pressure in filter monitoring
Filters are required in nearly all produc-tion processes to clean a product or for removing water from a product. ifm pressure sensors monitor the pressure of the liquid upstream anddownstream of the filter. An integratedbuilt-in display eliminates the need for a gauge.
See pages 52 - 57
Temperature transmitters monitorprocess temperature in pasteurizers
Pasteurization is one of the mostimportant processes in milk treatment.Maintaining the correct exposure timeand temperature of 60°C to 70°C iscritical to the process. The TAD Seriestemperature transmitters accuratelymonitor process temperature. A dualRTD design allows for self-verifying driftdetection, eliminating the need or regular calibration checks.
See pages 68 - 69
Temperature transmitters indicatetemperature in heat exchangers
In indirect heating, heat exchangers such as plate heat, tubular heat andscraped surface heat are used for heattransmission. To monitor the tempera-ture of the line leading to and from theexchanger, ifm’s temperature transmit-ters are an ideal solution. They can befitted with a variety of sanitary adaptersand flexible RTD lengths to suit anapplication.
See pages 62 - 67
Temperature transmitters offeraccurate process temperature
Temperature monitoring is one of the most important process indicationsin the food industry. ifm’s TA seriestemperature transmitter offers acompact measuring system that can be easily installed with standardTri-clamp® fittings. The transmitter has a 316 stainless steel housing that resists liquid ingress.
See pages 66 - 67
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
12
Solutions for food and beverage applications
www.ifm.com
efector Metris flow meter monitorsair and specialty gases in a plant
In cheese production, different types of presses are used such as trolley table, tunnel and conveyor presses.Compressed air is required to controlthe various pneumatic cylinders neededfor these presses. The efector Metris in-line flow meter monitors compressedair throughout the plant. The meterfeatures a 4-digit display and providesanalog, switching and pulse outputs.
See pages 90 - 91
efector Octavis diagnostic systemmonitors machine condition
Food processing machines such asseparators can be continuously moni-tored using vibration analysis to preventequipment downtime. efector Octavisprovides continuous vibration analysis on a separator’s internal rotating compo-nents such as bearings and spindles. Asvibration levels exceed the allowablelimits, maintenance measures can beplanned to prevent machine failure.
See pages 86 - 89
efector Octavis vibration monitorcontinuously monitors equipment
Critical machines such as the homoge-nizer is crucial to food processing. If amachine fails, plant downtime andstandstill costs can be incurred. Theefector octavis vibration monitorcontinuously monitors the rotatingcomponents of a machine. The monitorcan evaluate the machine’s vibrationcharacteristics to indicate potential failure.
See pages 86 - 89
Rising stem valve position sensorscontinuously monitor valve position
Rising stem valves are actuated by alinear stroke. The efector Valvis risingstem valve sensor provides continuousvalve position feedback and can signalup to three valve positions: valve open,valve closed and any interim positionsuch as seat lift /seal wear. The sensorsfeature simple pushbutton setup andprovide LED feedback for status indication.
See pages 38 - 39
13
Solutions for food and beverage applications
www.ifm.com
O1D distance measurement sensorsin food and beverage production
ifm’s O1D Series photoelectric distancemeasurement laser sensors are placedin key positions during ice cream production. Because of their longranges, they can be placed outside the wet environment. A large 4-digitalphanumeric display indicates measured distance.
See pages 30 - 31
Stainless steel I/O module with AS-inetworking reduces wiring
AS-interface has become theestablished standard for networkingsensors and actuators. This networkcan operate directly in conjunction with an existing PLC or can be linked to a higher-level bus system for low-cost remote I/O. The AS-i stainless steelProcessLine field module can be used in wet areas and connects multipledevices.
See pages 72 - 83
Pressure sensors monitoring linepressure to a pump
The compact PI Series pressure sensorsmonitor line pressure to food and beverage processing equipment. PISeries sensors incorporate a ceramicsensing element that can withstandpressure spikes. The sensors feature a bright 4-digit numeric display forpressure indication.
See pages 52 - 53
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
LMT Series point-level sensorignores foam, residue and build-up
ifm’s LMT Series point-level sensormonitors the level of liquids, viscousmedia and powders in food and beverage applications. In this example,the LMT sensor detects the level of chocolate in a tank. The sensoreliminates the challenges with residueand build-up that commonly causetraditional point-level sensors to outputfalse signals.
See pages 70 - 71
14
CE - With the CE marking the manufacturer documents that the units sold adhereto the European directives for specified electrical equipment.
Standards and approvals
EHEDG - The EHEDG (European Hygienic Equipment Design Group) prepares guide-lines for Europe concerning the requirements for measuring systems in machinesfor the food and pharmaceutical industry. Units with the EHEDG marking have beentested and approved for the food and pharmaceutical industry in accordance withthese guidelines.
3A - Units with this marking comply with the hygienic standards applicable in theUS. They are approved for use in hygienic applications in the dairy industry.
UL / CSA or cULus - Units with this marking meet the requirements of UL (Under-writers Laboratories Inc.) and CSA (Canadian Standards Association). In many casesthis approval is a prerequisite for access to the North American market. cULus is acombined approval and corresponds to the two individual approvals CSA and UL.
FDA - FDA (Food and Drug Administration) is a US supervisory authority for foodand drugs. This authority grants approvals for materials used in the food andpharmaceutical industries.
Many ifm sensors are Ecolab certified
Ecolab® is a global leader in the development of premium cleaning, sanitizing andhygiene products for the food processing, beverage, dairy and pharmaceuticalindustries. Known for their demanding standards, Ecolab tested the integrity andquality of ifm sensors, connectors and cables for use in washdown environments.
Independent tests were performed by Ecolab on the ifm inductive proximity sensors,the OG Series washdown sensors and the AS-i ProcessLine modules. Ecolab certifiedthat ifm products resisted the cleaning chemicals used in the tests.
Inductive proximity sensors OG Series washdown sensors AS-i ProcessLine modules
Food specific approvalsand testing
www.ifm.com
15
Food specific approvals and testing
www.ifm.com
0˚
30˚
30 second cycles4 GPM water@ 140 °F1500 psi
60˚
90˚
4"
IP69K high-pressure cleaning test
ifm inductive proximity sensors were tested in accordance with the IP69K standard.The goal of this test is to duplicate pressure cleaning conditions on a plant floor.
In the test fixture, the sensors were exposed to a 1500 psi spray of water at atemperature of 176 ˚F. The duration of each cleaning cycle was 30 seconds. Thetest was performed at specified angles using a spray nozzle located at a distance of 4” from the switch.
The sensors can withstand test conditions and is still operable providing 100% ofits sensing range.
IndustryStandard
Acceleration (g)
0 25030 500
ifmsensor
Shock test
Proximity sensors can be exposed to high levels of shock in industrial environments.ifm sensors were tested at a shock level of 500g. This test standard sets a newbenchmark for proximity sensor product development.
Vibration test
A vibration test was performed on sensors at a level of 40g with the oscillationfrequency spanned between 0 and 2000 Hz. This test checked the integrity of theelectronic circuit and the surface-mounted components. The vibration test wasdesigned to far exceed manufacturing plant conditions on industrial automationmachinery.
Oscillation Frequency (Hz)
10 50 100 500 1000 3000
10
0
20
30
40
Acc
eler
atio
n(g
)
Industry Standardifm sensor
Steam boiler test
To simulate the aging process, OG washdown sensors are placed in a steam boilerat 80°C. After defined time intervals, the sensors are submerged into ice water.Following the test, the sensor is subjected to a variety of function tests that deter-mine its durability.
0
20
40
60
80
100
Time Intervals (min.)
Tem
pera
ture
(˚C)
60 10 60 10
Thermal shock test
In pressure cleaning environments, proximity sensors can be exposed to extremetemperature conditions. A thermal shock test was performed on ifm sensors bycycling the temperature between 0 ˚C and 100 ˚C in short time intervals.After the test, the sensors’ characteristics are tested to ensure high reliability.
Designed, manufactured and tested to perform in washdown applications
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
16
Stainless steel sensor face and housingwithstand damage from physical impact
Chemically compatible with industrialcaustic and acid solutions
Thermal shock tested to withstandtemperature fluctuations up to 100°C
Zero leak design prevents ingress duringhigh pressure cleaning and steam cleaning
360° ring LED design indicates power and output
Designed and tested for use in high temperature (0 to 100°C) food and beverage applications ifm’s stainless steel metal face sensors are designed and tested to provide reliableposition detection in extreme environments found in food and beverageapplications. The sensor’s 316 stainless steel housing is chemically-compatible withindustrial cleaning solutions and will not corrode. The sensor’s zero-leak design,rated IP69K, prevents ingress during high-pressure cleaning and steam cleaning.
Inductive sensors
www.ifm.com
Tested to extremesifm stainless steel sensors are subjected to a variety oftests that insure reliable performance in the application.These tests include the IP69K high pressure cleaningtest, thermal shock test, and shock and vibration tests.The sensor’s high-grade stainless steel housingwithstands damage from impact in diverter panels. Stainless steel metal face sensors are designed
for food and beverage applications.
0
20
40
60
80
100
Time Intervals (min.)
Tem
pera
ture
(˚C)
60 10 60 100˚
30˚
30 second cycles4 GPM water@ 140 °F1500 psi
60˚
90˚
4"
IP69K high-pressure cleaning
Sensors are exposedto a 1500-psi spray at a 4" distance. The 140° F water issprayed in 30-sec-ond cleaning cycles.
Thermal shocktest
Sensors are sub-jected to tempera-tures fluctuationsbetween 0° C and100° C in shorttime intervals.
Impact indiverter panels
Metal face sen-sors withstanddamage fromimpact in diverterpanels.
ifm sensor
Metal face inductive sensors
New Non-flush
Models
New Non-flush
Models
17
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Inductive sensors
DC • Inductive sensors for washdown environments
Type DimensionsDiameter / Length
[mm]
SensingRange[mm]
Material SupplyVoltage
[V]
Protection SwitchingFrequency
[Hz]
Max LoadCurrent
[mA]
PartNo.
M12 diameter · M12 connector · Output function N.O. · DC
M18 diameter · M12 connector · Output function N.O. · DC
M30 diameter · M12 connector · Output function N.O. · DC
M12 / L = 60 3 f 316 stainless steel 10...36 DC
OutputType
PNP IP68 / IP69K 100 100 IFT 240
M12 / L = 60 3 f 316 stainless steel 10...36 DC NPN IP68 / IP69K 100 100 IFT 244
M12 / L = 70 6 nf 316 stainless steel 10...36 DC PNP IP68 / IP69K 500 100 IFT 245
M12 / L = 70 6 nf 316 stainless steel 10...36 DC NPN IP68 / IP69K 500 100 IFT 246
M18 / L = 70 5 f 316 stainless steel 10...36 DC PNP IP68 / IP69K 100 100 IGT 247
M18 / L = 70 5 f 316 stainless steel 10...36 DC NPN IP68 / IP69K 100 100 IGT 248
M18 / L = 70 12 nf 316 stainless steel 10...36 DC PNP IP68 / IP69K 500 100 IGT 249
M18 / L = 70 12 nf 316 stainless steel 10...36 DC NPN IP68 / IP69K 500 100 IGT 250
M30 / L = 70 10 f 316 stainless steel 10...36 DC PNP IP68 / IP69K 50 100 IIT 228
M30 / L = 70 10 f 316 stainless steel 10...36 DC NPN IP68 / IP69K 50 100 IIT 230
M30 / L = 70 25 nf 316 stainless steel 10...36 DC PNP IP68 / IP69K 250 100 IIT 231
M30 / L = 70 25 nf 316 stainless steel 10...36 DC NPN IP68 / IP69K 250 100 IIT 232
www.ifm.com
Accessories
Type Description PartNo.
Angle bracket for types M12 U 20301
Angle bracket for types M18 U 20302
Angle bracket for types M30 U 20303
Plastic nut for flow plate M18 x 1
E 19503
Cordsets
Type Description PartNo.
M12 Micro DC (4-pin), 5 m, PVC EVT 001
M12 Micro DC (4-pin), 10 m, PVC EVT 002
M12 Micro DC (4-pin), 25 m, PVC EVT 003
M12 Micro DC (4-pin), 5 m, PVC EVT 004
M12 Micro DC (4-pin), 10 m, PVC EVT 005
M12 Micro DC (4-pin), 25 m, PVC EVT 006
M12 Micro DC (4-pin), 5 m, PVC, 3 LED EVT 007
M12 Micro DC (4-pin), 10 m, PVC, 3 LED EVT 008
M12 Micro DC (4-pin), 25 m, PVC, 3 LED EVT 009
NEWNON-FLUSH
18
316 stainless steel housing rated IP69K forhigh pressure cleaning environments
Extended sensing range reduces failure frommechanical damage and increases uptime
Temperature-resistant PEEK plastic sensingface and gold-plated contacts
Ecolab certified – resistant to cleaning agentsand withstands harsh environments
Four set-up LEDs provide 360-degree visibility of output status
ifm inductive sensors for food and beverage applicationsifm inductive sensors are designed and tested to provide reliable position detectionin food and beverage applications. The industry standard housings are 316 stainlesssteel that are rated IP69K to withstand liquid ingress in high pressure cleaning envi-ronments. The sensor’s FDA-approved PEEK sensing face material is resistant toextreme temperature fluctuations from 32° to 212°F (0 to 100°C).
Extended sensing rangesifm’s inductive sensing ranges are up to twice as long as conventional switches ofthe same housing size. The sensors can be placed farther away from the target toprovide a greater margin of safety and to prevent mechanical damage caused byphysical contact.
Tested to perform in washdown applicationsSensors used in the food and beverage and pharmaceutical industries are pressure-cleaned with caustic and acid solutions. To ensure the sensors can perform in thisenvironment, they are subjected to the following tests.
Inductive sensors
www.ifm.com
0
20
40
60
80
100
Time Intervals (min.)
Tem
pera
ture
(˚C)
60 10 60 100˚
30˚
30 second cycles4 GPM water@ 140 °F1500 psi
60˚
90˚
4"
IP69K high-pressure cleaning
Sensors are exposedto a 1500-psi spray ata 4" distance. The140° F water issprayed in 30-second cleaning cycles.
Thermal shock test
Sensors are subjectedto temperatures fluc-tuations between 0° Cand 100° C in shorttime intervals.
Inductive proximity sensors
19
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Inductive sensors
DC • Inductive sensors for washdown environments
Type DimensionsDiameter / Length
[mm]
SensingRange[mm]
Material SupplyVoltage
[V]
Protection SwitchingFrequency
[Hz]
Max LoadCurrent
[mA]
PartNo.
M12 diameter · M12 connector · Output function N.O. · DC PNP
M12 / L = 45 4 f 316 stainless steel 10...36 DC IP68 / IP69K 800 100 IFT 203
M12 / L = 50 7 nf 316 stainless steel 10...36 DC IP68 / IP69K 800 100 IFT 200
www.ifm.com
Accessories
Type Description PartNo.
Angle bracket for types M12 U 20301
Angle bracket for types M18 U 20302
Angle bracket for types M30 U 20303
Mounting clamp Ø 12 mm E 11047
Mounting clamp Ø 18 mm E 11048
Mounting clamp Ø 30 mm E 11049
Plastic nut for flow plate M18 x 1
E 19503
Cordsets
Type Description PartNo.
M12 Micro DC (4-pin), 5 m, PVC EVT 001
M12 Micro DC (4-pin), 10 m, PVC EVT 002
M12 Micro DC (4-pin), 25 m, PVC EVT 003
M12 Micro DC (4-pin), 5 m, PVC EVT 004
M12 Micro DC (4-pin), 10 m, PVC EVT 005
M12 Micro DC (4-pin), 25 m, PVC EVT 006
M12 Micro DC (4-pin), 5 m, PVC, 3 LED EVT 007
M12 Micro DC (4-pin), 10 m, PVC, 3 LED EVT 008
M12 Micro DC (4-pin), 25 m, PVC, 3 LED EVT 009
M18 diameter · M12 connector · Output function N.O. · DC PNP
M18 / L = 46 8 f 316 stainless steel 10...36 DC IP68 / IP69K 600 100 IGT 203
M18 / L = 51 12 nf 316 stainless steel 10...36 DC IP68 / IP69K 300 100 IGT 200
M30 diameter · M12 connector · Output function N.O. · DC PNP
M30 / L = 50 14 f 316 stainless steel 10...36 DC IP68 / IP69K 50 100 IIT 205
M30 / L = 70 15 f 316 stainless steel 10...36 DC IP68 / IP69K 50 100 IIT 212
M30 / L = 70 22 nf 316 stainless steel 10...36 DC IP68 / IP69K 100 100 IIT213
M30 / L = 50 22 nf 316 stainless steel 10...36 DC IP68 / IP69K 100 100 IIT 200
20
316 stainless steel housing rated IP69K forhigh pressure cleaning environments
Extended sensing range reduces failure frommechanical damage and increases uptime
Temperature-resistant PEEK plastic sensingface and gold-plated contacts
Ecolab certified – resistant to cleaning agentsand withstands harsh environments
Four set-up LEDs provide 360-degree visibility of output status
Inductive sensors
www.ifm.com
ifm inductive sensors for food and beverage applicationsifm inductive sensors are designed and tested to provide reliable position detectionin food and beverage applications. The industry standard housings are 316 stainlesssteel that are rated IP69K to withstand liquid ingress in high pressure cleaning envi-ronments. The sensor’s FDA-approved PEEK sensing face material is resistant toextreme temperature fluctuations from 32° to 212°F (0 to 100°C).
Extended sensing rangesifm’s inductive sensing ranges are up to twice as long as conventional switches ofthe same housing size. The sensors can be placed farther away from the target toprovide a greater margin of safety and to prevent mechanical damage caused byphysical contact.
Tested to perform in washdown applicationsSensors used in the food and beverage and pharmaceutical industries are pressure-cleaned with caustic and acid solutions. To ensure the sensors can perform in thisenvironment, they are subjected to the following tests.
0
20
40
60
80
100
Time Intervals (min.)
Tem
pera
ture
(˚C)
60 10 60 100˚
30˚
30 second cycles4 GPM water@ 140 °F1500 psi
60˚
90˚
4"
IP69K high-pressurecleaning
Sensors are exposedto a 1500-psi spray at a 4" distance. The 140° F water issprayed in 30-second cleaning cycles.
Thermal shock test
Sensors are subjectedto temperaturesfluctuations between0° C and 100° C inshort time intervals.
Inductive proximity sensors
21
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Inductive sensors
AC/DC • Inductive sensors for washdown environments
Type DimensionsDiameter / Length
[mm]
SensingRange[mm]
Material SupplyVoltage
[V]
Protection SwitchingFrequency
[Hz]
Max LoadCurrent
[mA]
PartNo.
M18 diameter · 1/2“ connector · Output function N.O. · AC/DC
M18 / L = 70 5 f 316 stainless steel 20...140 AC/DC IP68 / IP69K 25 / 400 200 IGT 002
M18 / L = 70 12 nf 316 stainless steel 20...140 AC/DC IP68 / IP69K 25 / 300 200 IGT 001
www.ifm.com
Accessories
Type Description PartNo.
Plastic nut for flow plate M18 x 1
E 19503
Angle bracket for types M18 U 20302
Angle bracket for types M30 U 20303
M30 diameter · 1/2“ connector · Output function N.O. · AC/DC
M30 / L = 70 14 f 316 stainless steel 20...140 AC/DC IP68 / IP69K 25 / 100 200 IIT 001
M30 / L = 70 22 nf 316 stainless steel 20...140 AC/DC IP68 / IP69K 25 / 100 200 IIT 002
Mounting clamp Ø 18 mm E 11048
Mounting clamp Ø 30 mm E 11049
Cordsets
Type Description PartNo.
1/2" Micro AC (3-pin), 5 m, PVC E 18206
1/2" Micro AC (3-pin), 10 m, PVC E 18207
1/2" Micro AC (3-pin), 25 m, PVC E 18208
1/2" Micro AC (3-pin), 5 m, PVC E 18209
1/2" Micro AC (3-pin), 10 m, PVC E 18210
1/2" Micro AC (3-pin), 25 m, PVC E 18211
22
Magnetic sensor detects target fitted with magnet
Rated IP69K for high pressure cleaningenvironments
Small housings with extended sensingranges up to 76 mm
316 stainless steel sensing face and housingwithstand damage from physical abuse
Temperature shock resistant in the rangeof 0...100 °C
Demanding applicationsifm magnetic proximity sensors provide non-contact indication for position andspeed applications. The sensors can detect a magnet through materials such asstainless steel, non-ferrous metal, aluminum, plastic and wood. With the integrationof Giant Magnetoresistive (GMR) technology, ifm magnetic sensors offer extremelylong sensing ranges – up to 76 mm – and high switching frequencies.
Long sensing range and high switching frequencyMagnetic sensors have a considerably higher sensing range compared to inductivesensors. They detect damping magnets without contact up to 76 mm. ifm sensorsreach a switching frequency of more than 5,000 Hz. This high switching frequencyapplies to the whole temperature range.
Magnetic sensors
www.ifm.com
Position and speed application examples:
Magnetic sensorsdetect the U-tubeposition in a diverterpanel by sensing amagnet through astainless steel plate.
ifm’s magnetic prox-imity sensor is usedfor pulse evaluationby detecting a mag-net mounted onrotating machinery.Ideal for high-speedapplications.
Metalface magnetic sensors
23
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Magnetic sensors
DC • Magnetic sensors for washdown environments
Type DimensionsDiameter / Length
[mm]
SensingRange[mm]
Material SupplyVoltage
[V]
Protection SwitchingFrequency
[Hz]
Max LoadCurrent
[mA]
PartNo.
M12 diameter · M12 connector · Output function N.O. · DC PNP
M12 / L = 60 60 316 stainless steel 10...30 DC IP68 / IP69K 5000 200 MFT 202
M18 diameter · M12 connector · Output function N.O. · DC PNP
M18 / L = 60 70 316 stainless steel 10...30 DC IP68 / IP69K 5000 200 MGT 203
www.ifm.com
Accessories
Type Description PartNo.
Disk magnet, 30 x 10 mmBarium ferrite
E 10752
Disk magnet, 40 x 13 mmM5 mounting stud, 316Ti, stainless steel
E 11803
Disk magnet, 20 x 9.5 mmM5 mounting stud, 316Ti, stainless steel
E 12291
Angle bracket for types M12 U 20301
Angle bracket for types M18 U 20302
Cordsets
Type Description PartNo.
M12 Micro DC (4-pin), 5 m, PVC EVT 001
M12 Micro DC (4-pin), 10 m, PVC EVT 002
M12 Micro DC (4-pin), 25 m, PVC EVT 003
M12 Micro DC (4-pin), 5 m, PVC EVT 004
M12 Micro DC (4-pin), 10 m, PVC EVT 005
M12 Micro DC (4-pin), 25 m, PVC EVT 006
M12 Micro DC (4-pin), 5 m, PVC, 3 LED EVT 007
M12 Micro DC (4-pin), 10 m, PVC, 3 LED EVT 008
M12 Micro DC (4-pin), 25 m, PVC, 3 LED EVT 009
24
Magnetic sensors designed to reliablydetect pigs moving at high speedsor in a stopped position
Integrated 1 second stretched output tocompensate for PLC scan time lag
316 stainless steel housing to withstandthe harshest environments
Rated IP68/IP69K for high pressurecleaning environments
Broad temperature range from 0...104 °C
Reliable pig detection in cleaning processesifm designed the MGT 201 pig detector sensor to reliablydetect standard pigs in food and beverage applications.The sensor incorporates a built-in one second stretchedoutput to compensate for PLC scan time lag. The sensorfeatures a stainless steel housing rated IP68/IP69K and abroad temperature range from 0…104° C. ifm’s MGT 201pig detecting sensors can be used in multiple locations on a pipe to accurately locate a pig at various pointsthroughout the process.
Magnetic sensors
Magnetic sensors for pigdetection in cleaning processes
NS
Pipes are cleaned using siliconepigs encased in a magneticband. As a pig passes throughthe pipe, ifm’s magnetic sensordetects the magnetic band of the pig through the stain-less steel pipe indicating thelocation of the pig.
Propellant
Pig launch
Sensor
Sensor
Sensor
Sensor
Sensor
Pig
www.ifm.com
25
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Magnetic sensors
DC • Magnetic sensors for washdown environments
Type DimensionsDiameter / Length
[mm]
SensingRange[mm]
Material SupplyVoltage
[V]
Protection SignalStretcher
[s]
Max LoadCurrent
[mA]
PartNo.
M12 diameter · M12 connector · Output function N.O. · DC PNP
M18 / L = 60 100 316 stainless steel 10...30 DC IP68 / IP69K 1 200 MGT 201
Accessories
Type Description PartNo.
Mounting adapter and strap for 3” pipe UM 0006
Mounting adapter and strap for 4” pipe UM 0007
Mounting adapter and strap for 2“ pipe UM 0005
Cordsets
Type Description PartNo.
M12 Micro DC (4-pin), 5 m, PVC EVT 001
M12 Micro DC (4-pin), 10 m, PVC EVT 002
M12 Micro DC (4-pin), 25 m, PVC EVT 003
M12 Micro DC (4-pin), 5 m, PVC EVT 004
M12 Micro DC (4-pin), 10 m, PVC EVT 005
M12 Micro DC (4-pin), 25 m, PVC EVT 006
M12 Micro DC (4-pin), 5 m, PVC, 3 LED EVT 007
M12 Micro DC (4-pin), 10 m, PVC, 3 LED EVT 008
M12 Micro DC (4-pin), 25 m, PVC, 3 LED EVT 009
MountingAdapter
MountingStrap
Pipe
Sensor
The sensor is inserted into the adapter and placedon the pipe. A metal strap tightens over theadapter and secures it to the pipe.
www.ifm.com
26
Magnetic T-slot sensors offer significantadvantages over Reed switch technology
Sensor easily mounts to clean line cylinderusing protective bracket with strap
Excellent repeatability and fast responsetimes enable increased uptime
Unlimited number of switching cyclesextends life-in-application
T-slot sensors easily fit most cylinder typesusing ifm mounting accessories
Cylinder sensors
www.ifm.com
Compact housing, simple mounting for washdown environmentsifm offers miniature cylinder sensors that easily fit clean line cylinders to providea low-profile mounting. An ifm protective bracket protects the sensor in theapplication.
Reed ifm Solid State Solid State Advantages
Durability Low High (1-2 M cycles) (unlimited cycles)
Repeatability Low High
Response Low HighTime
Sensitivity Low High
Temperature High HighStability
Longevity Low High
ifm cylinder sensor has unlimited number ofcycles. Typically, a reed switch is replaced manytimes during the life of a cylinder.
Provides excellent repeatability. Mechanicalwear in reed switches can cause the switchpoint to drift.
Fast response time. Reed switches with slowerresponse times cannot maintain their accuracyin high speed applications.
Can operate reliably with weak magnetic fields.Reed switches require great magnetic strength for sensing.
Extremely stable operating characteristics over awide temperature range.
Immunity from long-term effects of magneticfields. Contacts on reed switches can becomepermanently magnetized over time.
Technology comparison
Magnetic sensors forclean line cylinders
Narrow-down your cylinder sensor selectionwith Product Selector. This tool allows you to search by cylinder manufacturer orcylinder type.
Product Selector is located under the ProductCatalog tab on the ifm website.
Search for cylinder manufacturer orcylinder type with Product Selector –Go to www.ifm.com
27
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Cylinder sensors
DC • Cylinder sensors for washdown environments
Type Dimensions
[mm]
Material SupplyVoltage
[V]
OutputType
SwitchingFrequency
[Hz]
Protection Max LoadCurrent
[mA]
PartNo.
M12 threaded 0.3 m pigtail · Output function N.O.
25 x 5 x 6.5 PA (polyamide) 10...30 DC PNP > 6000 IP67 / IP69K 100 MK 5157
25 x 5 x 6.5 PA (polyamide) 10...30 DC NPN > 6000 IP67 / IP69K 100 MK 5186
Prewired 2 m cable · Output function N.O.
25 x 5 x 6.5 PA (polyamide) 10...30 DC PNP > 3000 IP67 / IP69K 100 MK 5158
www.ifm.com
Required mounting accessories:
T-slot sensor mounts on clean line cylinders using a fixing strap and adapter. Select accessory kit according to cylinder diameter.
Type For cylinder diameter measuring…
PartNo.
11…19 mm E 11975
18…29 mm E 11976
28…39 mm E 11977
38…49 mm E 11978
48…59 mm E 11979
58…69 mm E 11980
78…89 mm E 11981
98…109 mm E 11982
Cordsets
Type Description PartNo.
M12 Micro DC (4-pin), 5 m, PVC EVT 001
M12 Micro DC (4-pin), 10 m, PVC EVT 002
M12 Micro DC (4-pin), 25 m, PVC EVT 003
M12 Micro DC (4-pin), 5 m, PVC EVT 004
M12 Micro DC (4-pin), 10 m, PVC EVT 005
M12 Micro DC (4-pin), 25 m, PVC EVT 006
Fixing strap and adapter kit
For more mounting options, call 800-441-8246 or visit www.ifm.com
Measure the outside diameter of your cylinder to
determine the appropriatemounting accessory.
28 www.ifm.com
Industry standard 18mm stainless steelhousing available in quick disconnect or prewired
Ecolab certified sensors resistant tochemicals used in washdown environments
Visible red light source simplifies installation and maintenance
Plastic lens eliminates the possibility ofglass splintering into food and beverages
High grade stainless steel mounting accessories available
OG Series photoelectrics for washdown applicationsifm's OG Series photoelectric sensors are designed and tested to provide reliableposition detection in extreme washdown conditions. Industry standard 18mmdiameter housings are 316 stainless steel and are ideal for food and beverageapplications. The OG wetline series was specially developed for applications in the food industry, such as cheese plants, breweries and the meat industry.
A visible red light source simplifies installation and maintenance. High-gradestainless steel mounting accessories are available for quick installation.
Ecolab-certified for food and beverage The Ecolab-certified sensors are resistant to chemical solutions used in cleaning andsteam cleaning. The sensor's zero-leak design prevents ingress during high pressurecleaning, and the sensor's plastic lens eliminates the possibility of glass splintering infood and beverage processes.
Steam boiler testTo simulate the aging process, OG washdown sensors are placed in a steam boiler at 80°C. After defined time intervals, the sensors are submerged into icewater. Following the test, the sensor is subjected to a variety of function tests that determine its durability.
The right combination of price and performanceifm OG sensors offer high performance, long life-in-application and a great valueresulting in savings for your food processing facility.
Photoelectric sensors
Photoelectrics for washdown
OG Tubular
OG Cube
OG TubularPrewired
29www.ifm.com
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Photoelectric sensors
DC • OG photoelectric for washdown environments
Type Operating Principle
Range Spot Ø atMaximum Range
[mm]
Output SupplyVoltage
[V]
6m CablePartNo.
M18 diameter · M12 connector or 6 meter prewired
Through-beam receiver 20 m – DO PNP 10...36 DC OGE 302
Through-beam receiver 20 m – LO PNP 10...36 DC OGE 303
M18 diameter · M12 connector or 6 meter prewired
Diffuse, with background suppression 100 mm 8 LO PNP 10...36 DC OGH 306
Diffuse, with background suppression 100 mm 8 DO PNP 10...36 DC OGH 307
Diffuse, with background suppression 200 mm 12 LO PNP 10...36 DC OGH 308
Diffuse, with background suppression 200 mm 12 DO PNP 10...36 DC OGH 309
Diffuse, with background suppression 300 mm 15 LO PNP 10...36 DC OGH 310
Diffuse, with background suppression 300 mm 15 DO PNP 10...36 DC OGH 311
M18 diameter · M12 connector or 6 meter prewired
Polarized retro-reflective 4 m 160 DO PNP 10...36 DC OGP 302
Polarized retro-reflective 4 m 160 LO PNP 10...36 DC OGP 303
M18 diameter · M12 connector or 6 meter prewired
Through-beam transmitter 20 m 800 – 10...36 DC OGS 301
M12 ConnectorPartNo.
OGE 300
OGE 301
Through-beam receiver 20 m – DO PNP 10...30 DC –
Through-beam receiver 20 m – LO PNP 10...30 DC –
Through-beam receiver 20 m – DO NPN 10...30 DC –
OGE 380
OGE 381
OGE 382
OGH 300
OGH 301
OGH 302
OGH 303
Diffuse, with background suppression 100 mm 7 LO PNP 10...30 DC –
Diffuse, with background suppression 200 mm 13 LO PNP 10...30 DC –
Diffuse, with background suppression 100 mm 7 LO NPN 10...30 DC –
Diffuse, with background suppression 200 mm 13 LO NPN 10...30 DC –
OGH 380
OGH 381
OGH 382
OGH 383
OGH 304
OGH 305
Diffuse, with background suppressionAdjustable
15…300 mm25
ProgrammableLO/DO PNP
10...36 DC OGH 313OGH 312
OGP 300
OGP 301
OGS 300
Accessories
Type Description PartNo.
Tall swivel bracket for OG, stainless steel
E 20869
Short swivel bracket for OG, stainless steel
E 20870
80 mm reflector
50 mm reflector
E 20005
E 20956
Swivel bracket includes 80 mm reflector,stainless steel
Swivel bracket includes 50 mm reflector,stainless steel
E 20996
E 20998
Cordsets
Type Description PartNo.
M12 Micro DC (4-pin), 5 m, PVC EVT 001
M12 Micro DC (4-pin), 10 m, PVC EVT 002
M12 Micro DC (4-pin), 25 m, PVC EVT 003
M12 Micro DC (4-pin), 5 m, PVC EVT 004
M12 Micro DC (4-pin), 10 m, PVC EVT 005
M12 Micro DC (4-pin), 25 m, PVC EVT 006
M12 Micro DC (4-pin), 5 m, PVC, 3 LED EVT 007
M12 Micro DC (4-pin), 10 m, PVC, 3 LED EVT 008
M12 Micro DC (4-pin), 25 m, PVC, 3 LED EVT 009
Through-beam transmitter 20 m 800 – 10...30 DC –OGS 380
30 www.ifm.com
Reliable solutions for long-range object detection and level applicationsThe O1D laser sensor provides non-contact distance measurementup to 10 meters. For longer distances, the O1D106 provides adistance measurement of 75 meters when used with a reflector.
To measure level in food processing applications, the O1D300 isspecifically designed for this application and offers a range of up to 10 meters.
Contained in a compact, robust metal housing that measures only 42 mm x 42 mm,the sensor is suited for food and beverage applications and mounts easily in applica-tions with limited space. The sensor’s display can be programmed for two setpointsor for one setpoint and one analog output. The display can also provide distancevalues in inches, millimeters or meters.
ifm O1D advantageBackground suppression and ultrasonicsensors are lower-cost alternatives fordistance measurement but have shorterranges. Traditional time-of-flight systemsoffer an improved level of performance but are much higher in cost. The ifm O1Dsensor combines the advantages of thesesystems at an affordable price.
Right balance of performance, size and pricefor distance measurement applications
O1D Series sensors are ideal for long-rangebackground suppression applications
Simple pushbutton setup quicklyestablishes parameters
Model O1D 300 detects level of food and opaque liquids
Large 4-digit alphanumeric displayindicates measured distance
Multiple outputs: single switching, dualswitching or switching and analog output
Photoelectric sensors
sensors with back-ground suppression
ultrasonicsensors
ifm O1D
Perf
orm
ance
Price
traditionaltime-of-flightsystems
Multiple O1D sensors can be mountedin a food process.
Laser distance and level sensors
31www.ifm.com
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Photoelectric sensors
DC • Laser distance measurement sensor
DC • Level sensor
OutputOperatingPrinciple
Type MeasuringRange
Spot Ø at Max Range
SupplyVoltage
[V]
CurrentConsumption
[mA]
Sampling Frequency
[Hz]
PartNo.
Laser distance · M12 connector · 42 x 52 x 59 mm metal body
Optical level sensor for bulk materials and opaque liquids · M12 connector · 42 x 52 x 59 mm metal body
4-20 mA / 0-10 VDC and PNP or dual PNP
0.2...10 m 6 18...30 DC 150 1...50 O1D 100
4-20 mA / 0-10 VDC and PNP or dual PNP
0.3...6 m 6 18...30 DC 150 1...33 O1D 155
4-20 mA / 0-10 VDC and PNP or dual PNP
0.2...10 m 6 18...30 DC 150 1...33 O1D 300
LO/DO PNP 0.2...10 m 6 10...30 DC 150 5 O1D 101
4-20 mA / 0-10 VDC and PNP or dual PNP
1...75 m* 150 18...30 DC 150 1...33
LightSource
Class 2 laser Red light
4-20 mA / 0-10 VDC and NPN or dual NPN
0.2...10 m 6 18...30 DC 150 1...50 O1D 103Class 2 laser
Red light
Class 1 laserRed light
Class 2 laserRed light
Class 2 laser Red light
Class 2 laser Red light
O1D 106
LO/DO NPN 0.2...10 m 6 10...30 DC 150 5Class 2 laser
Red lightO1D 104
Accessories
Type Description PartNo.
Rail mount swivel bracket for O1D, stainless steel
E 21079
Protective plastic cover E 21133
Reflector · 95 x 95 mmfor O1D106
E 20454
Sanitary G1 BSPP adapter, stainless steel
E 21224
Reflector · 226 x 262 mmfor O1D106
E 21159
Cordsets
* Reflector required to achieve 75 meter range.
Polarized retro-reflective
Diffuse reflectivewith background
suppression
Diffuse reflectivewith background
suppression
Type Description PartNo.
M12 Micro DC (4-pin), 5 m, PVC EVT 001
M12 Micro DC (4-pin), 10 m, PVC EVT 002
M12 Micro DC (4-pin), 25 m, PVC EVT 003
M12 Micro DC (4-pin), 5 m, PVC EVT 004
M12 Micro DC (4-pin), 10 m, PVC EVT 005
M12 Micro DC (4-pin), 25 m, PVC EVT 006
M12 Micro DC (4-pin), 5 m, PVC, 3 LED EVT 007
M12 Micro DC (4-pin), 10 m, PVC, 3 LED EVT 008
M12 Micro DC (4-pin), 25 m, PVC, 3 LED EVT 009
32 www.ifm.com
Color sensor features high color contrastsensitivity and resolution
Clear object sensor detects glass, film, PETbottles and transparent objects
Contrast sensor uses reliable RGB technology to determine the best LEDcolor to contrast two target colors
High switching frequencies for fastmoving applications
Auto-detect for PNP/NPN configurationand “Teach Mode” setup
LED display indicates output status
O5G Series clear object sensorsThe O5G Series clear object sensors can solve one of the most difficultphotoelectric applications – the detection of clear objects such as film,glass, or PET plastic bottles and transparent packaging. Standard sen-sors typically have too much excess gain and “burn“ through the clearmaterial. The sensor’s automatic calibration and quick pushbuttonsetup enables reliable detection of clear objects.
O5C Series color sensors for error-proofing applicationsifm’s O5C Series color sensors identify objects by color in food andbeverage applications. The sensor uses reliable RGB technology toprovide high-resolution detection of color in fast-moving applications.Five selectable tolerance steps establish allowable color differentiation.A simple one-step teach function quickly establishes the parameter of an application. The sensor’s high switching frequency of 2,000 Hzprovides accurate color detection in high-speed applications.
O5K Series contrast sensors for object detectionifm’s high performance O5K Series contrast sensors offer a variety ofsensing solutions for the packaging, assembly, material handling andprinting industries. The sensor is ideal for detecting registration marksor printed color bars by determining the difference between the targetand the background. The sensor offers high-color contrast sensitivityand resolution to provide reliable object detection.
Photoelectric sensors
The O5 detects properorientation in fast-moving applications.
The O5 can determinethe presence of a labelwhile ignoring back-ground colors.
Additional applications
Color, contrast and clearobject and sensors
The O5C can detect varia-tions of the same color.
The O5G clear objectdetection.
The O5K can identify thebest color for contrast.
33www.ifm.com
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Color, contrast and clear object sensors
DC • Clear object photoelectric sensor
Type Operating Principle
Range
[mm]
Spot Ø atMaximum Range
[mm]
OutputLight-on or
Dark-on
SupplyVoltage
[V]
PartNo.
70 x 47 x 18 mm plastic body · M12 connector
Polarized retro-reflective 1500 40 LO / DO PNP / NPN 10...36 DC O5G 500
DC • Contrast photoelectric sensor
Type Operating Principle
Range
[mm]
Spot Ø atMaximum Range
[mm]
OutputLight-on or
Dark-on
SupplyVoltage
[V]
PartNo.
70 x 47 x 18 mm plastic body · M12 connector
Diffuse 18…22 1.5 x 5 LO / DO PNP / NPN 10...36 DC O5K 500
SwitchingFrequency
[Hz]
1,500
DC • Color photoelectric sensor
Type Operating Principle
Range
[mm]
Spot Ø atMaximum Range
[mm]
OutputLight-on or
Dark-on
SupplyVoltage
[V]
PartNo.
70 x 47 x 18 mm plastic body · M12 connector
Diffuse 15…19 2.5 x 6 LO / DO PNP / NPN 10...36 DC O5C 500
SwitchingFrequency
[Hz]
2,000
SwitchingFrequency
[Hz]
10,000
Accessories
Type Description PartNo.
50 mm reflector E 20722
Swivel bracket for rod, stainless steel Complete set includes clamp
E 21083
Freestanding mounting bracket, stainless steel
E 21087
Cordsets
Type Description PartNo.
M12 Micro DC (4-pin), 5 m, PVC EVT 001
M12 Micro DC (4-pin), 10 m, PVC EVT 002
M12 Micro DC (4-pin), 25 m, PVC EVT 003
M12 Micro DC (4-pin), 5 m, PVC EVT 004
M12 Micro DC (4-pin), 10 m, PVC EVT 005
M12 Micro DC (4-pin), 25 m, PVC EVT 006
M12 Micro DC (4-pin), 5 m, PVC, 3 LED EVT 007
M12 Micro DC (4-pin), 10 m, PVC, 3 LED EVT 008
M12 Micro DC (4-pin), 25 m, PVC, 3 LED EVT 009
34
Non-contact sensor detects open andclosed position of quarter-turn valves
Sensor and target puck feature low-profiledesign that’s 1/4 the size of switchboxes
Bright LED indicates open / closed valve position
No open cavities, completely sealedagainst the effects of liquids
Installed in less than 60 seconds
Quarter-turn valve position sensors
Quarter-turn valves with pneumatic actuators are used for process control in foodprocessing applications. Typical applications include tank farms, diverter valves, valveskids, and valve banks. Accurately detecting the position of the valve is critical forprocess control. Traditionally, switchboxes have been used for position feedback.However, switchboxes are large, mounting is complex and malfunction is common.ifm offers a low-profile, non-contact solution that accurately detects when a valve isopen or closed.
Valve position sensors
Valve position sensors
Challenge: Limit switchesphysically contact cams toindicate valve position.These mechanical switchescan stick, break and wear.
Solution: ifm efector’sinductive sensing tech-nology provides non-contact sensing of valveposition. With no physicalcontact, the sensor has along life-in-application.
An ifm valve position feedbacksolution includes a sensor, cableassembly and a rotating target puck.
Target puck
Valve sensor
M12 cordset
Step 1: Select an ifm valve position sensor
Step 2: Select a target puck
Step 3: Select a cordset
Sensor
Target puck
35
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Valve position sensors
M12 connector · Output function 2 x N.O. · PNP
40 x 26 x 47 4 nf PBT (Pocan) 10...36 DC IP67 1300 250 IN 5327
7/8“ connector · Output function 2 x N.O.
40 x 26 x 49 4 nf PBT (Pocan)20...140 AC10…140 DC
IP67 25 200 IN 0117
Terminal chamber · Output function 2 x N.O. · PNP
33 x 60 x 92 4 nf PA (polyamide) 10...30 DC IP67 500 100 IN 5409
Accessories for the IN 5409
Type Description PartNo.
Cable gland · M20 x 1.5 Housing materials: PA 6.6
E 12208
Protective cap · M20 x 1.5Housing materials: PA 6.6
E 12209
Cordsets
Type Description PartNo.
M12 Micro DC (4-pin), 5 m, PVC EVT 001
M12 Micro DC (4-pin), 10 m, PVC EVT 002
M12 Micro DC (4-pin), 25 m, PVC EVT 003
7/8” Mini AC (5-pin) 2 m, PVC E 18042
7/8” Mini AC (5-pin) 4 m, PVC E 18043
Valve position sensors with point-to-point wiring • AC/DC
Valve position sensors with point-to-point wiring • DC
Type Dimensions
[mm]
SensingRange[mm]
Material SupplyVoltage
[V]
Protection SwitchingFrequency
[Hz]
Max LoadCurrent
[mA]
PartNo.
34 mm
56 mm
YZ
M5 or 10-24
Sensor
X
4mm x 4mmslot
M6thread Z
Actuator stem fortarget pucks
M6 x 15 mm10 - 24 x 1 1/4”and M5 x 30 mm
U 20114
M6 x 15 mm10 - 24 x 2 1/8”and M5 x 55 mm
U 20118
Puck mountingscrew
Sensor mountingscrews
Part No.
M6 x 25 mm 10 - 24 x 1 1/4” UV 0002
M6 x 35 mm 10 - 24 x 1 3/4” UV 0003
M6 x 25 mm M5 x 30 mm UV 0002
1/4 - 20 x 1” 10 - 24 x 1 1/4” U 20132
M6 x 25 mm 10 - 32 x 1 1/2” UV 0002
M6 x 35 mm 10 - 32 x 1 3/4” UV 0003
M6 x 25 mm M5 x 45 mm UV 0003
Dimensions XxYxZ [mm]
80 x 30 x 20
Select a puck kit according to the dimensions of your ISO Namur actuator. The X and Y dimensions are the position of the actuator mounting holes. The Z dimension is the height of the actuator stem.
80 x 30 x 30
80 x 30 x 20
80 x 30 x 20
80 x 30 x 20
80 x 30 x 30
80 x 30 x 30
130 x 30 x 30
130 x 30 x 50
Selecting a puck kit
Puck kits for manufacturer specific actuatorsActuator Model Part No.Automax SNA050, SNA063, SNA085, SNA100 UV 0002Automax B050, B085, B100 UV 0002Bettis RPC Series 250, 450, 1000, 2250, 5000, 11000 UV 0002Bray Series 92/93, Sizes 63, 83, 92, 118, 127 U 20161Conbraco (Apollo) 3T-30, 3T-40, 3T-50, 3T-60 UV 0002El-o-matic E25, E40, E65, E100, E200, P280, E350 UV 0002Fisher 1035-E Series E25, E40, E65, E100, E200, E350 UV 0002Hytork XL45, XL70, XL130 UV 0002Hytork XL185, XL280, XL425, XL680 UV 0003Hytork XL26, XL71, XL131 UV 0002Hytork XL186, XL221, XL280, XL425, XL680 UV 0002Neles-Jamesbury VPVL01 05, 10, 20, 25, 30 UV 0002Neles-Jamesbury VPVL01 35, 40, 45 UV 0003Nibco NP20-SR, NP30-SR, NP40-SR, NP50-SR, NP60-SR UV 0002Protech Series 72/72 050, 100, 200, 250, 300 UV 0002TruTorq 2, 4, 8, 12, 20, 35 UV 0002TruTorq 55, 70, 100, 150 U 20114TYCO Series 79U, TRS, SRP, and TRP to fit .814” bore U 20128TYCO Series 79U, TRS, SRP, and TRP to fit 1” bore U 20139TYCO Series 79U, TRS, SRP, and TRP to fit 1.12” bore U 20149Ultra-flo (TRIAC) TR20, 2R40, 2R80, 2R130, 2R200, 2R300 UV 0002Unitorq M10, M20, M30, M52, M73, M103 UV 0002Unitorq M148, M222, M295 UV 0003Worcester NAMUR 1039, 1539, 2039 UV 0002XOMOX Matryx 450, 750, 1250 U 20136
For actuators not shown, call 800-441-8246 or visit www.ifm.com.
1
1
1
3
3
2
36
Valve position sensors
www.ifm.com
Actuator Sensor-interface networks an entiresystem of valves
Non-contact sensor detects open and closedposition of quarter-turn valves
AS-i networking connects up to 62 quarter-turn and 62 solenoid valves
Connects to DeviceNet, Profibus, and Ethernet
Parallel wiring is replaced by a 2-wire cablecarrying both data and power
AS-i valve position sensors
Integrated AS-i networking connection for pneumatic valves
Valve applications such as tank farms and valve skids requirea large number of feedback devices. These devices areconnected back to a PLC which monitors valve position.With the growing number of valves being used and minimalplant floor space available, wiring has become time-consuming and difficult to troubleshoot. To reduce wiring, asimple solution is to apply the AS-i networking system.
AS-i networks an entire system of valves with only one 2-wire cable, completelyeliminating wire bundles. Valve position sensors with AS-i connectivity provide anintegrated connection for the solenoid valve. Connection to the control unit is madewith a 2-wire AS-i cable. This solution provides remote indication of valve status and can connect to higherlevel bus systems via DeviceNet, Profibus, and Ethernet. Up to 62 quarter-turn valvefeedback devices and 62 solenoids can be connected to one AS-i master.
• Connects to higher-level bus systems
• Provides non-contact valve position
• Sensor and puck feature low-profile design that is one-quarter the size of aswitchbox
• The valve sensor uses an integrated output for the solenoid valve.
• Mounts on all ISO standard type actuators.
Please refer to pages 84 - 95 for more details and products for AS-i networking.
An ifm AS-i valve feedback solutionincludes a sensor, cable assembly,rotating target puck and AS-i cable
Target puck
AS-i valvesensor
AS-i cable
DIN connector
Sensor
Target puck
Step 1: Select an ifm valve position sensor
Step 2: Select a target puck
Step 3: Select a DIN-style connector
37
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
AS-i valve position sensors
Valve position sensors with AS-i networking • DC
Type Dimensions
[mm]
SensingRange[mm]
Material SupplyVoltage
[V]
Protection SwitchingFrequency
[Hz]
Max LoadCurrent
[mA]
PartNo.
AS-i connection · M12 connector · 2 inputs / 1 output · Output function transistor PNP
55 x 60 x 35 4 nf PBT (Pocan) 26.5...31.6 DC IP67 – – AC 2316
AS-i connection · M12 connector · 2 inputs
55 x 60 x 35 4 nf PBT (Pocan) 26.5...31.6 DC IP67 – – AC 2315
AS-i connection · M12 connector · 2 inputs / 2 outputs · Output function transistor PNP
55 x 60 x 35 4 nf PBT (Pocan) 26.5...31.6 DC IP67 – – AC 2317
DIN patchcords
Type Description PartNo.
DIN A (18 mm) to M12 Micro DC patchcords, .3 m E 11416
DIN B (10 mm) to M12 Micro DC patchcords, .3 m E 11421
DIN C (8 mm) to M12 Micro DC patchcords, .3 m E 11426
34 mm
56 mm
YZ
M5 or 10-24
Sensor
X
4mm x 4mmslot
M6thread Z
Actuator stem fortarget pucks
M6 x 15 mm10 - 24 x 1 1/4”and M5 x 30 mm
U 20114
M6 x 15 mm10 - 24 x 2 1/8”and M5 x 55 mm
U 20118
Puck mountingscrew
Sensor mountingscrews
Part No.
M6 x 25 mm 10 - 24 x 1 1/4” UV 0002
M6 x 35 mm 10 - 24 x 1 3/4” UV 0003
M6 x 25 mm M5 x 30 mm UV 0002
1/4 - 20 x 1” 10 - 24 x 1 1/4” U 20132
M6 x 25 mm 10 - 32 x 1 1/2” UV 0002
M6 x 35 mm 10 - 32 x 1 3/4” UV 0003
M6 x 25 mm M5 x 45 mm UV 0003
Dimensions XxYxZ [mm]
80 x 30 x 20
Select a puck kit according to the dimensions of your ISO Namur actuator. The X and Y dimensions are the position of the actuator mounting holes. The Z dimension is the height of the actuator stem.
80 x 30 x 30
80 x 30 x 20
80 x 30 x 20
80 x 30 x 20
80 x 30 x 30
80 x 30 x 30
130 x 30 x 30
130 x 30 x 50
Selecting a puck kit
Puck kits for manufacturer specific actuatorsActuator Model Part No.Automax SNA050, SNA063, SNA085, SNA100 UV 0002Automax B050, B085, B100 UV 0002Bettis RPC Series 250, 450, 1000, 2250, 5000, 11000 UV 0002Bray Series 92/93, Sizes 63, 83, 92, 118, 127 U 20161Conbraco (Apollo) 3T-30, 3T-40, 3T-50, 3T-60 UV 0002El-o-matic E25, E40, E65, E100, E200, P280, E350 UV 0002Fisher 1035-E Series E25, E40, E65, E100, E200, E350 UV 0002Hytork XL45, XL70, XL130 UV 0002Hytork XL185, XL280, XL425, XL680 UV 0003Hytork XL26, XL71, XL131 UV 0002Hytork XL186, XL221, XL280, XL425, XL680 UV 0002Neles-Jamesbury VPVL01 05, 10, 20, 25, 30 UV 0002Neles-Jamesbury VPVL01 35, 40, 45 UV 0003Nibco NP20-SR, NP30-SR, NP40-SR, NP50-SR, NP60-SR UV 0002Protech Series 72/72 050, 100, 200, 250, 300 UV 0002TruTorq 2, 4, 8, 12, 20, 35 UV 0002TruTorq 55, 70, 100, 150 U 20114TYCO Series 79U, TRS, SRP, and TRP to fit .814” bore U 20128TYCO Series 79U, TRS, SRP, and TRP to fit 1” bore U 20139TYCO Series 79U, TRS, SRP, and TRP to fit 1.12” bore U 20149Ultra-flo (TRIAC) TR20, 2R40, 2R80, 2R130, 2R200, 2R300 UV 0002Unitorq M10, M20, M30, M52, M73, M103 UV 0002Unitorq M148, M222, M295 UV 0003Worcester NAMUR 1039, 1539, 2039 UV 0002XOMOX Matryx 450, 750, 1250 U 20136
For actuators not shown, call 800-441-8246 or visit www.ifm.com.
1
1
1
3
2
38
Continuous position feedback of rising stem valvesThe efector valvis rising stem valve position sensor is an innovative solution forindicating the position of linear valves. The sensor continuously detects the positionof rising stem valves with a stroke of up to 80mm.
The sensor is placed on top of the the valve stem with an adapter. Using the sen-sor’s pushbutton setup, the open and closed positions of the valve are established.The sensor indicates three key positions of the valve: valve open, valve closed andany intermediate position, e.g., seat lift. efector valvis sends this information to a controller.
The efector valvis sensor reliably detects the position of the stem at a resolution of0.2mm and eliminates all mechanical adjustments and significantly reduces setuptime of a valve.
Single seat and double seat valvesFor double seat valves, efector valvis detects theopen, closed and seat lift cleaning position. For single seat valves, the sensor detects the open andclosed positions and provides an additional outputfor seal contact wear.
Continuous position feedback for risingstem valves up to 80 mm
Analog or three switching outputs: open,closed, and seat lift / seal wear
Resolution of 0.2 mm across the entiremeasuring range
Simple pushbutton setup and LEDfeedback
Permanent valve monitoring for predictivemaintenance
Valve position sensors
www.ifm.com
efector valvis provides continuous feedback ofrising stem valve position.
The sensor eliminates adjustmentsand the need to mount multiplesensors. Switchpoints are taughtvia the pushbutton setup.
Rising stem valve sensors
39
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Valve position sensors
DC • Rising stem valve position sensors
Type Dimensions
[mm]
MeasuringDistance
[mm]
Resolution
(mm)
Material SupplyVoltage
[V]
Protection Max LoadCurrent
[mA]
PartNo.
0.3 m cable with M12 connector · 3 x N.O. PNP
65 x 52 x 110 0...80 0.2 PA (polyamide) 18...36 DC IP65 / IP67 100 IX 5010
2 m cable · Analog output, 1...5 VDC
67.5 x 43 x 110 0...80 0.2 PA (polyamide) 18...36 DC IP65 / IP67 – IX 5002
0.3 m cable with M12 connector · AS-i connection · 3 inputs
65 x 52 x 100 0...80 0.2 PA (polyamide) 26.5...31.6 DC IP65 / IP67 – IX 5030
www.ifm.com
Accessories
Type Mounting Adapters
PartNo.
Mounting adapter for Alfa Laval valves
E 11900
Mounting adapter for Südmo valves
Housing Material
Adapter: PA Target: stainless steel
316L / 1.4404
Adapter: PA Target: stainless steel
316L / 1.4404E 11989
Cordsets for IX 5010
Type Description PartNo.
M12 Micro DC, (5-pin), 5 m, PVC EVT 010
M12 Micro DC, (5-pin), 10 m, PVC EVT 011
M12 Micro DC, (5-pin), 25 m, PVC EVT 012
M12 Micro DC, (5-pin), 5 m, PVC EVT 013
M12 Micro DC, (5-pin), 10 m, PVC EVT 014
M12 Micro DC, (5-pin), 25 m, PVC EVT 015
For additional mounting adapters, please call 800-441-8246. Cordsets for IX 5002
M12 Micro DC (4-pin), 5 m, PVC EVT 001
M12 Micro DC (4-pin), 10 m, PVC EVT 002
M12 Micro DC (4-pin), 25 m, PVC EVT 003
M12 Micro DC (4-pin), 5 m, PVC EVT 004
M12 Micro DC (4-pin), 10 m, PVC EVT 005
M12 Micro DC (4-pin), 25 m, PVC EVT 006
40
Ideal for inspection and error-proofingapplications with regular and definedshapes and contours
Reliable inspection testing throughout the production process
CMOS image element and powerfuldigital signal processor
Robust housing for use in industrialenvironments
Easy application Setup Wizard offers step-by-step instruction with advancedfunctionality
Vision sensors
efector dualis Contour Sensors
Contour Sensor
The Contour Sensor can easily differentiate between the twoparts because the shape of thetwo parts are very different.
efector dualis Contour Sensor is agood solution to maintain qualitycontrol.
The Contour Sensor can identify an incorrect part by matchingthe contour of the reference part.
efector dualis Contour Sensor
ifm’s Contour Sensor has the ability to analyze shapes and capture thecontour of an object. It is ideal in applications where the object’s shape isrepeatable and defined.
Good part / bad part
Good part Bad part
O2Dxxx sen-sors (pages40, 41) ana-lyze the edgesof an objectFunctionality
O2Vxxx sen-sors (pages42, 43) ana-lyze the areaof an object
Patternmatching
Shape detection
Orientation
Object position
Object counting
Sorting
Object area
Inner /Outer radius
Object width/height
Roundness / Rectangularity
Hole counting
Object contrast
√
√
√
√ √
√
√
√
√
√
√
√
√
√
12
3
A BC
41www.ifm.com
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Vision sensors
DC • efector dualis Contour Sensor
Type Process Interface
Typeof Light
LED
Maximum Fieldof View Size
[mm]
DetectionRate[Hz]
Motion Speed(Maximum)
[m/s]
PartNo.
8-pin · M12 connector
Ethernet TCP / Ethernet IPinfrared 400 x 300 20 1 O2D 224
Ethernet TCP / Ethernet IPinfrared 640 x 480 20 1 O2D 220
Ethernet TCP / Ethernet IPinfrared 1280 x 960 20 1 O2D 222
Ethernet TCP / Ethernet IPinfrared 400 x 300 20 1 O2D 225
Ethernet TCP / Ethernet IPinfrared 640 x 480 20 1 O2D 227
Ethernet TCP / Ethernet IPinfrared 1280 x 960 20 1 O2D 229
Optional backlight • PUR cable 0.15 m with 4-pin M12 connector
infrared 25 x 2534.4 x 66.5 x 9.2 O2D 906
infrared 50 x 5081 x 103 x 9.8 O2D 907
infrared 100 x 100133 x 156 x 9.8 O2D 908
TransistorOutputs(up to 5)
Type Type of Light LED
Illuminated Area[mm]
Dimensions
[mm]
PartNo.
PNP
PNP
PNP
NPN
NPN
NPN
Accessories
Type Description PartNo.
Type Description PartNo.
Protective plastic cover E 21166
Plastic lens for diffusing light E 21165
M12 Micro DC (8-pin) 2 m, PUR E 11231
M12 Micro DC (8-pin) 5 m, PUR E 11232
M12 Micro DC (8-pin) 10 m, PUR E 11806
M12 Micro DC (8-pin) 10 m, PUR E 11311
M12 Micro DC (8-pin) 2 m, PUR E 11950
M12 Micro DC (8-pin) 5 m, PUR E 11807
Cordsets
Parameter setting cable, 2 m, M12 D-coded / RJ45, cross-link
E 11898
Parameter setting cable, 5 m, M12 D-coded / RJ45, cross-link
E 18422
Parameter setting cable, 10 m, M12 D-coded / RJ45, cross-link
E 18423
Mounting set, high-grade stainless steel, 100 mm rod
U 60042
Mounting set, high-grade stainless steel, 100 mm rod and rail mount cube
U 60043
M12 Micro DC (4-pin) 5 m, PVC EVT 001
M12 Micro DC (4-pin) 10 m, PVC
For backlight
EVT 002
42 www.ifm.com
Ideal for inspection and error-proofingapplications with irregularly shapedobjects
Reliable inspection testing throughout the production process
CMOS image element and powerfuldigital signal processor
Robust housing for use in industrialenvironments
Easy application Setup Wizard offers step-by-step instruction with advancedfunctionality
Vision sensors
efector dualis Pixel Counter
Pixel Counter
The Pixel Counter is a good fit in this application because the sizeand shape of the mark can vary.
A mark is used to identify parts thathave been through the manufactur-ing process. Without the mark, theparts go into quarantine, where everyunit must be manually sorted.
ifm's Pixel Counter is able to identifythat the mark is present regardless ofthe shape or size of the part, eliminat-ing the quarantine process.
efector dualis Pixel Counter
ifm’s Pixel Counter analyzes the area of an object and counts the pixels. It is ideal in applications where the object’s shape, size or color is irregular.
Mark present / mark missing
Mark present Mark missing
O2Dxxx sen-sors (pages40, 41) ana-lyze the edgesof an objectFunctionality
O2Vxxx sen-sors (pages42, 43) ana-lyze the areaof an object
Patternmatching
Shape detection
Orientation
Object position
Object counting
Sorting
Object area
Inner /Outer radius
Object width/ height
Roundness / Rectangularity
Hole counting
Object contrast
√
√
√
√ √
√
√
√
√
√
√
√
√
√
12
3
A BC
43www.ifm.com
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Vision sensors
DC • efector dualis Pixel Counter
Type Process Interface
Typeof Light
LED
Maximum Fieldof View Size
[mm]
DetectionRate[Hz]
Motion Speed(Maximum)
[m/s]
PartNo.
8-pin · M12 connector
Ethernet TCP / Ethernet IPwhite 400 x 300 20 1 O2V 104
Ethernet TCP / Ethernet IPwhite 640 x 480 20 1 O2V 100
Ethernet TCP / Ethernet IPwhite 1280 x 960 20 1 O2V 102
Optional backlight • PUR cable 0.15 m with 4-pin M12 connector
infrared 25 x 2534.4 x 66.5 x 9.2 O2D 906
infrared 50 x 5081 x 103 x 9.8 O2D 907
infrared 100 x 100133 x 156 x 9.8 O2D 908
TransistorOutputs(up to 5)
Type Type of Light LED
Illuminated Area[mm]
Dimensions
[mm]
PartNo.
PNP
PNP
PNP
Accessories
Type Description PartNo.
Type Description PartNo.
Protective plastic cover E 21166
Plastic lens for diffusing light E 21165
M12 Micro DC (8-pin) 2 m, PUR E 11231
M12 Micro DC (8-pin) 5 m, PUR E 11232
M12 Micro DC (8-pin) 10 m, PUR E 11806
M12 Micro DC (8-pin) 10 m, PUR E 11311
M12 Micro DC (8-pin) 2 m, PUR E 11950
M12 Micro DC (8-pin) 5 m, PUR E 11807
Cordsets
Parameter setting cable, 2 m, M12 D-coded / RJ45, cross-link
E 11898
Parameter setting cable, 5 m, M12 D-coded / RJ45, cross-link
E 18422
Parameter setting cable, 10 m, M12 D-coded / RJ45, cross-link
E 18423
Mounting set, high-grade stainless steel, 100 mm rod
U 60042
Mounting set, high-grade stainless steel, 100 mm rod and rail mount cube
U 60043
M12 Micro DC (4-pin) 5 m, PVC EVT 001
M12 Micro DC (4-pin) 10 m, PVC
For backlight
EVT 002
44 www.ifm.com
Potatoes in 3D
First industrial 3D level sensor that evaluates volume of food product
Accurately detects food level in bins andhoppers and on vibratory conveyors
Ideal alternative to point-level sensorsthat monitor only one point of reference
Sensor withstands harsh indoor andoutdoor environments
Provides switching and analog outputs forapplication versatility
Compact sensor uses reliable time-of-flight distance measurement
Vision sensors
Solution: ifm’s Level Sensor uses an arrayof sensing elements to indicate true level
ifm’s O3D Level Sensor monitors the entire area of a hopper. The sensor then averages outthe “hills and valleys” to provide an accurate indication of level.
Challenge: point level is not an indicationof true level
Ultrasonic or optical point level sensors monitoronly a single point versus an entire area. When“hills and valleys” are present in the product,accurate level is not actually indicated.
The right level measurement can help you improve your food processingoperation with higher accuracy and better efficiencyThe O3D Level Sensor is designed to evaluate the volume and level of product infood processing applications. A common challenge in many food processing applications is determining the accurate level of food in a hopper due to “hills andvalleys” that are created by shifting product. The compact, easy-to-use O3D LevelSensor can view an entire area of food product to determine its overall volume.
Bread baking
The O3D Level sensorcan detect if bread pansare underfilled oroverfilled for properfood production.
Raw materials in feeders/conveyors
The O3D Level Sensorcan detect raw materialsin feeders and on vibra-tory conveyors. The sen-sor can be used bothindoors and outdoorswith no impact fromexternal ambient light.
O3D Level Sensor offer solutions totypical food processing applications
O3D level sensor
45www.ifm.com
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Vision sensors
DC • 3D level sensor
Type OperatingPrinciple
Resolution
[pixels]
Angle of Aperture(Horizontal x Vertical)
[°]
Lighting Max.SamplingRate [Hz]
SupplyVoltage
[V]
PartNo.
8-pin · M12 connector
Time-of-flight distancemeasurement and
photonic mixer devicetechnology
Dimensions
[mm]
137 x 75 x 95 64 x 48 30° x 40° Infrared LED 20 24 DC O3D 200
Accessories
Type Description PartNo.
Mounting set for rod mounting Ø 12 mm
E3D 103
Cordsets
Type Description PartNo.
M12 Micro DC (8-pin) 2 m, PUR E 11231
M12 Micro DC (8-pin) 5 m, PUR E 11232
M12 Micro DC (8-pin) 10 m, PUR E 11806
M12 Micro DC (8-pin) 10 m, PUR E 11311
M12 Micro DC (8-pin) 2 m, PUR E 11950
M12 Micro DC (8-pin) 5 m, PUR E 11807
ifm’s O3D Level Sensor can improve uptime throughout the food production process
Level of food on a conveyor The volume ofdelicate food, suchas potato chips, can become tooconcentrated onone area of theconveyor and begin to break.
Bulk level ofgrains andpowdersGrains and powderscan shift within thebin creating hillsand valleys, leadingto inaccurate leveldetection.
Contents in a box In fast packagingapplications, a boxof bottles only partially filled cango undetected.
View level in 3DThe 3D Level sensorcan help maintainan even distributionof product on avibratory conveyor.Monitoring in realtime, the sensor willhelp to preventfood breakage andoverflows.
View level in 3DThe sensor’s pixelarray spreads acrossthe grain to detect theentire area. The highand low points areidentified and can beused for direct outputor averaged to providea more accurate levelof available space.
View contents in 3DThe O3D sensorevaluates the entirecontents of a box and sends an alarmoutput based onpackaging errors.
Mounting rod, 200 mm, Ø 14 mm, M10 thread, stainless steel
E 21228
Parameter setting cable, 2 m, M12 D-coded / RJ45, cross-link
E 11898
Parameter setting cable, 5 m, M12 D-coded / RJ45, cross-link
E 18422
Parameter setting cable, 10 m, M12 D-coded / RJ45, cross-link
E 18423
46
Does not require a special key or codedmagnet for a target
High tolerance to misalignment and nuisance tripping
Multi-function safety relay compatiblewith industry-standard safety devices
Self-monitoring circuit verifies that thesensor is functioning correctly
Rated up to SIL 2 or SIL 3 according to IEC 61508
Safety technology
www.ifm.com
ifm solution:Setup is fast. ifminductive non-contactfail-safe sensors donot require codedmagnets or keys.
Challenge:2-piece interlockingmechanical switch isprone to misalignmentand time-consumingsetup.
Fail-safe sensors for series connectionUp to 10 non-contact, fail-safe sensors can be connected in a series with the ifmclocked input versions. Ideal for monitoring multiple stations, such as robotics cells,the fail-safe sensors will provide an output if one point along chain is stopped.Using ifm’s quick disconnect T-piece connectors, wiring is greatly reduced.
Single connection Series connection (up to 10 sensors)
ifm’s fail-safe sensors are a better alternative
Non-contact, fail-safe inductive sensors for safety applications
ifm’s non-contact fail-safe sensors incorporateinductive technology that detects standard metaltarget material such as stainless or mild steel.Coded magnets or mechanical keys are notrequired as targets, greatly reducing installationtime and avoiding misalignment issues andnuisance tripping. The sensors continuouslymonitor the sensing window for target positionand dwell time. ifm’s non-contact fail-safe sen-sors may be used with any standard safety relay,safety PLC and bus system.
Safety relay Safety sensor Safety relay Safety sensors
Inductive safety sensors
Nospecial
key
Nospecial
key
47
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Safety technology
DC • Inductive sensors for safety-related applications
www.ifm.com
Non-contact, fail-safe inductive sensors for safety applications · 2 x PNP output (OSSD)· M12 connector
Fail-Safe sensors for series connection – for connection to ifm safety relays or Safety at Work · M12 connector
Multi-function safety relays reduce stock levels
Housing Dimensions Enable Zone[mm]
PartNo.
M12 x 70 mm 0.5…4 nf GF 711S
Approval
SIL 2, PL d
Response Time on Removal
≤ 1 ms
Response Time on Approach
≤ 1 ms
ProtectionRating
IP67
HousingMaterial
316 S.S., PBT
M18 x 71 mm 1…8 nf GG 711SSIL 2, PL d ≤ 1 ms ≤ 1 ms IP67 316 S.S., PBT
M18 x 71 mm 1…5 f GG 712SSIL 2, PL d ≤ 1 ms ≤ 1 ms IP67 Plated brass, PBT
M30 x 80 mm 6…12 nf GI 701SSIL 3, PL e < 50 ms < 200 ms IP69K 316 S.S., PBT
M30 x 70 mm 1...15 nf GI 711SSIL 2, PL d ≤ 10 ms ≤ 1 ms IP67 316 S.S., PBT
M30 x 70 mm 1...10 f GI 712SSIL 2, PL d ≤ 10 ms ≤ 1 ms IP67 Plated brass, PBT
40 x 40 x 66mm 10…15 nf GM 701SSIL 3, PL e < 50 ms < 200 ms IP67 PPE, diecast zinc
40 x 40 x 66mm 4…20 nf GM 705SSIL 3, PL e < 50 ms < 200 ms IP67 PPE, diecast zinc
M18 x 91 mm 3…6 nf GG 505SSIL 3, PL e < 20 ms < 200 ms IP69K 316 S.S., PBT
M18 x 91 mm 1…4 f GG 507SSIL 3, PL e < 20 ms < 200 ms IP69K Plated brass, PBT
M30 x 80 mm 6...12 nf GI 505SSIL 3, PL e < 20 ms < 200 ms IP69K 316 S.S., PEEK
40 x 40 x 66mm 10…15 nf GM 504SSIL 3, PL e < 20 ms < 200 ms IP67 PPE, diecast zinc
40 x 40 x 66mm 10…20 nf GM 505SSIL 3, PL e < 20 ms < 200 ms IP67 PPE, diecast zinc
Accessories
Housing Description Part No.
AS-i SAW ClassicLine evaluation module AC 016S
T-piece for series connection E 11569
Cordsets
ifm’s multi-functional safety relays are compatible with industry standard safety devices. The versatile safetyrelays connect single or dual channel emergency stops, mechanical safety switches, transistor-based safetydevices, light curtains, two-hand controls and ifm’s non-contact safety sensors. All of these devices can bemonitored with one relay. The benefit is a large reduction in stock levels that eliminates the need for differenttypes of safety relays for various applications. Dual channel safety devices can be configured to monitorsimultaneous logic and cross fault detection across the inputs.
Type PartNo.
Dimensions Supply Voltage
Safety Outputs
Auxiliary Outputs
G 1501S100 x 25 x 105mm 19.2…30 V DC 2 x N.O. contacts 1 N.O. transistor output (PNP)
G 1502S114 x 25 x 105mm 19.2…30 V DC2 x N.O. contacts with delay
3 x N.O. contacts
1 N.O. contact1 N.C. contact
1 N.O. transistor output (PNP)
G 1503S100 x 25 x 105mm 19.2…30 V DC 2 x N.O. transistor outputs (PNP) 1 N.O. transistor output (PNP)
Type Description PartNo.
M12 Micro DC (4-pin), 5 m, PVC EVT 001
M12 Micro DC (4-pin), 10 m, PVC EVT 002
M12 Micro DC (4-pin), 25 m, PVC EVT 003
M12 Micro DC (4-pin), 5 m, PVC EVT 004
M12 Micro DC (4-pin), 10 m, PVC EVT 005
M12 Micro DC (4-pin), 25 m, PVC EVT 006
48
Safety technology
www.ifm.com
Type 2 and Type 4 safety light curtains and grids according to IEC 61496
Compact 28 x 30 mm housing profile forless intrusive mounting
Up to 12 meter sensing range – no software required
Light curtains offer protected heights of 160 mm to 1510 mm in intervals of 150 mm
Light grids available in 2-, 3- and 4-beamversions
Curtains and grids help to protect plant personnel
Low profile, robust housing
Point of operationguardingLIght curtains help pro-tect an operator fromthe hazards associatedwith material position-ing such as mechanicalpower presses.
Compact 28 x 30 mmhousing profile
Curtain heights from160 to 1510 mm
Up to 12 metersensing range
Light grids availablein 2-, 3- and 4-beamversions
Highly visible LEDs forsetup and statusindication
Integrated T-slotmounting, hardwareincluded
Industry standardM12 connector
Perimeter guarding
Light curtains can beplaced along the floor todetect foot traffic. Thelight curtains send analarm when a passerbypenetrates the perimeterof a hazardous zone.
Access prevention
ifm’s light grids can beused to detect thepresence of personneland signal the machinecontroller to stop whilepersonnel are presentwithin the area.
Application solutions
ifm's safety light curtains and grids provide an optical solution for protecting plantpersonnel in unsafe work areas. Unlike mechanical options such as safety gates andpull-back restraints, ifm's hands-free solution eliminates excessive handling whenentering hazardous areas and using equipment.
ifm’s safety light curtains and grids consist of an emitter and receiver pair that createa multi-beam barrier of infrared light in front of, or around, a hazardous area. Whenany of the beams are blocked by intrusion in the sensing field, the light curtainsends a signal to the machine’s e-stop.
Safety light curtains
49
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Safety technology
www.ifm.com
Safety rating: type 2 / SIL 2 · Protected area width 0…4 m / 3…12 m
Resolution Part No.(pair)
Safety light curtains for hand protection
Safety light curtains / body, body parts protection
30 mm
40 mm
Protected Area Height*
OY 034S
OY 054S
OY 074S
OY 094S
610 mm
OY 036S
OY 056S
OY 076S
OY 096S
910 mm
OY 038S
OY 058S
OY 078S
OY 098S
1210 mm
610 mm
910 mm
1210 mm
Resolution Protected Area Height*
Safety rating: type 4 / SIL 3 · Protected area width 0…4 m / 3…12 m
Part No.(pair)
Safety rating: type 2 / SIL 2 · Protected area width 0…4 m / 3…12 m
Resolution Part No.(pair)
Protected Area Height*
Resolution Protected Area Height*
Safety rating: type 4 / SIL 3 · Protected area width 0…4 m / 3…12 m
Part No.(pair)
OY 044S
OY 064S
OY 084S
OY 104S
OY 046S
OY 066S
OY 086S
OY 106S
OY 048S
OY 068S
OY 088S
OY 108S
50 mm
90 mm
610 mm
910 mm
1210 mm
610 mm
910 mm
1210 mm
50 mm
90 mm
610 mm
910 mm
1210 mm
610 mm
910 mm
1210 mm
30 mm
40 mm
610 mm
910 mm
1210 mm
610 mm
910 mm
1210 mm
Safety light grids / body protection
OY 111S
OY 112S
OY 113S
Part No.(pair)
Safety rating: type 2 / SIL 2 · Protected area width 0…4 m / 3…12 m
Noof
Beams
Protected AreaHeight
510 mm
810 mm
910 mm
Distance Between Beams
500 mm
400 mm
300 mm
2
3
4
OY 114S
OY 115S
OY 116S
Part No.(pair)
Noof
Beams
Protected AreaHeight
510 mm
810 mm
910 mm
Distance Between Beams
500 mm
400 mm
300 mm
2
3
4
Safety rating: type 4 / SIL 3 · Protected area width 0…4 m / 3…12 m
Safety light curtains for hand protection
Safety light curtains / body, body parts protection
Safety light grids / body protection
*Also available: 160, 310, 460, 760, 1060, 1360, 1510 mm heights
*Also available: 310, 460, 760, 1060, 1360, 1510 mm heights
*Also available: 760, 1060, 1360, 1510 mm heights
*Also available: 160, 310, 460, 760, 1060, 1360, 1510 mm heights
*Also available: 310, 460, 760, 1060, 1360, 1510 mm heights
*Also available: 760, 1060, 1360, 1510 mm heights
Cordsets for transmitters
Type Description PartNo.
Type Description PartNo.
M12 Micro DC (8-pin) 10 m, PUR E 12167
M12 Micro DC (8-pin) 5 m, PUR E 12168
M12 Micro DC (8-pin) 10 m, PUR E 12169
M12 Micro DC (8-pin) 5 m, PUR E 12166
Cordsets for receivers
Can’t find the right Light Curtain for your application, call 800-441-8246 or visit www.ifm.com.
M12 Micro DC (5-pin), 5 m, PVC EVT 010
M12 Micro DC (5-pin), 10 m, PVC EVT 011
M12 Micro DC (5-pin), 25 m, PVC EVT 012
M12 Micro DC (5-pin), 5 m, PVC EVT 013
M12 Micro DC (5-pin), 10 m, PVC EVT 014
M12 Micro DC (5-pin), 25 m, PVC EVT 015
50
Safety technology
www.ifm.com
Safety light curtains and grids withintegrated IP69K enclosure
Resistant to steam and high pressurecleanings
SIL to IEC 61508 and PL to ISO 13849
Both Type 2 / SIL 2 and Type 4 / SIL 3versions available
Up to 15 meter protected width
IP69K safety light curtains forwashdown conditions
ifm introduces a new line of safety light curtains and light grids that are ratedIP69K for washdown environments.
ifm's safety light curtains and grids can provide a protective optical barrierbetween plant personnel and unsafe equipment and dangerous areas. Thecurtains and grids can be used for perimeter guarding, access preventionand point-of-operation guarding.
Housed in a robust PMMA transparent tubing, ifm's safety light curtains andgrids carry an enclosure rating of IP69K and are resistant to high pressurecleaning and steam.
• A heater element coupled with sealing O-rings preventmoisture build-up inside the tubing
• Highly-visible LEDs provide status, setup andtroubleshooting indication
• Mounting is simple using the integrated tabs
• Light curtains are shipped fully assembled, reducing total installation costs
For application flexibility, safety light curtains are available with 14 mm or 30mm resolution and light grids with 2-, 3- or 4-beams.
Sanitary and robust design for food and beverage applications
ifm safety light curtains are housed in a trans-parent PMMA tubing to resist high pressurecleanings.
51
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Safety technology
www.ifm.com
Safety rating: type 4 / SIL 3 · Protected area width 0…2 m / 1…5 m
Resolution Part No.(pair)
Safety light curtains for finger protection
Safety light curtains for hand protection
14 mm
Protected Area Height
OY 403S
OY 434S
460 mm
OY 405S
OY 436S
760 mm
OY 407S
OY 438S
1060 mm
Safety rating: type 2 / SIL 2 · Protected area width 0…3 m / 2…10 m
Resolution Part No.(pair)
Protected Area Height*
Resolution Protected Area Height*
Safety rating: type 4 / SIL 3 · Protected area width 0…7 m / 3…15 m
Part No.(pair)
OY 444S
OY 446S
OY 448S
30 mm
610 mm
910 mm
1210 mm
30 mm
610 mm
910 mm
1210 mm
Safety light grids / body protection
OY 411S
OY 412S
OY 413S
Part No.(pair)
Safety rating: type 2 / SIL 2 · Protected area width 0…3 m / 2…10 m
Noof
Beams
Protected AreaHeight
510 mm
810 mm
910 mm
Distance Between Beams
500 mm
400 mm
300 mm
2
3
4
OY 421S
OY 422S
OY 423S
Part No.(pair)
Noof
Beams
Protected AreaHeight
510 mm
810 mm
910 mm
Distance Between Beams
500 mm
400 mm
300 mm
2
3
4
Safety rating: type 4 / SIL 3 · Protected area width 0…7 m / 3…15 m
Safety light curtains for hand protection
Safety light grids / body protection
*Also available: 160, 310, 460, 760, 1060, 1360, 1510 mm heights *Also available: 160, 310, 460, 760, 1060, 1360, 1510 mm heights
Can’t find the right Light Curtain for your application, call 800-441-8246 or visit www.ifm.com
Compact housing, robust design
ifm offers a variety of safety lightcurtains and grids for finger, handand body protection.
Compact 56 mmdiameter housingprofile
Front view Side view
Protected area heights from 160 to 1510 mm
Up to 15 meter protected area width
PMMA transparentprotective tubing
Highly visible LEDs for setup and statusindication
Integrated tabssimplify mounting
Sealing O-ring
IP69K rated enclosure
6 m PVC cable
Heater element prevents moisturebuild-up inside lightcurtain protectivetubing
52
316 stainless steel housing designed forsanitary applications such as tank leveland line pressure
2-wire transmitter simplifies wiring andeasily retrofits existing applications
Completely-welded housing preventsingress from cleaning agents andwithstands washdown conditions
Programmable switching and analogoutputs with 4-digit numeric display thatcan be parameterized and mounted in lessthan 10 minutesifm’s process adapters feature options forEPDM, PEEK and Viton sealing
Pressure transmitter with 100% stainless steel housing resists liquid ingressThe PI Series pressure transmitter line features a 316 stainless steel housingdesigned for sanitary applications such as tank level and line pressure.
The completely-welded housing prevents ingress from aggressive cleaning agentsand withstands harsh washdown conditions. The transmitter’s vent design incorpo-rates a Gore-Tex® diaphragm that resists oil ingress.
Multiple process fittings for versatilityFor application versatility, multiple process fittings can be used. ifm’s Tri-clamp®
adapters feature PEEK and Viton sealing for food and beverage applications.
PEEK and Viton offer long-term sealing and are resistant to swelling and harshchemicals. The pressure transmitter provides a high overall accuracy of ±0.2%.
Outputs include switching and analog or dual switching that are selectable throughthe programming menu.
Pressure transmitters
www.ifm.com
Multiple sanitary mounting options
ifm sanitary transmitters connect to industry standardadapters and fittings.
The PI2 Series sanitary transmitters monitorline pressure. These units incorporate a ceramic sensing element that can withstandpressure spikes that typically occur with quickclosing valves.
2-wire all stainless steel pressure transmitters
53
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Pressure transmitters
DC • All stainless steel pressure transmitters • Analog and switching outputs
Type Overpressure /Burst Pressure
[psi]
Scalable Analog Start Point*
[psi]
Scalable AnalogEnd Point*
[psi]
Display Units Available
[psi]
Supply Voltage
[V]
PartNo.
M12 connector · Output: PNP/NPN switching and 4…20 mA / 20…4 mA scalable analog Medium temperature range: -13…257 °F / -25…125 °C (293 °F / 145 °C max 1 hr.)
58 / 435 -2…30 inH2O 8…40 inH2O inH2O, mbar, kPa, mmWS, % 18…32 DC PI 2789
1450 / 5070 -14.4…271.8 76.2…362.7 psi, bar, mPa, % 18…32 DC PI 2793
725 / 2175 -14.5…108.7 21.8…145.0 psi, bar, mPa, % 18…32 DC PI 2794
435 / 1450 -14.5…43.5 0…58.0 psi, bar, kPa, % 18…32 DC PI 2795
290 / 725 -1.8…27.3 7.3…36.3 psi, bar, kPa, inH2O, mWS, % 18…32 DC PI 2796
145 / 435 -0.73…10.88 2.90…14.5 psi, mbar, kPa, inH2O, mWS, % 18…32 DC PI 2797
145 / 435 -5.0…75.2 inH2O 20.1…100.4 inH2O inH2O, mbar, kPa, mmWS, % 18…32 DC PI 2798
145 / 435
MeasuringRange[psi]
-2…40 inH2O
-14.4…362.7
-14.5…145.0
-14.5…58.0
-1.8…36.3
-0.73…14.5
-5…100 inH2O
-14.5…14.5 -14.5…7.25 -7.25…14.5 psi, mbar, kPa, inH2O, mWS, % 18…32 DC PI 2799
www.ifm.com
Accessories
Type Description PartNo.
1.5” Tri-clamp® adapter with EPDM O-ring E 33208
2” Tri-clamp® adapter with EPDM O-ring E 33209
Weldable adapter with EPDM O-ring E 30130
Cordsets
* Analog scaling turndown: 4:1
For fittings other than Tri-clamp®, please call 1-800-441-8246.
Replacement Viton O-ring E 30123
Replacement EPDM O-ring,5 pieces per pack
E 30054
Replacement PEEK O-ring E 30124
Type Description PartNo.
M12 Micro DC (4-pin), 5 m, PVC EVT 001
M12 Micro DC (4-pin), 10 m, PVC EVT 002
M12 Micro DC (4-pin), 25 m, PVC EVT 003
M12 Micro DC (4-pin), 5 m, PVC EVT 004
M12 Micro DC (4-pin), 10 m, PVC EVT 005
M12 Micro DC (4-pin), 25 m, PVC EVT 006
54
3-in-1 unit: Transmitter and switch withthe advantages of a gauge display
Gauge display indicates the current operat-ing pressure relative to the overall range
Pointer does not require damping liquid andis driven by an integrated stepper motor
Transmitter can be configured in less than 5 minutes using two optical pushbuttons
Display can be rotated 350 degrees foroptimal visibility
Pressure transmitters
www.ifm.com
High protection rating (IP 69K)
LED ring indi-cates setpointand resetpointand trend display
Analog displaywith scaling inbar and psi
Digital display – brightLED display (no LCDs) Application parameters
are setup via opticaltouch-screen pushbuttons
Extended display range
Does not requiredamping liquid
If there is no power,the pointer disap-pears behind thenumeric display
Experience the best of both worlds… PG transmitter featureshighly visible gauge with the functionality of a pressure sensor
Rotatable display 350° formounting flexibility
ifm’s adapters feature PEEK and Viton sealingfor food and beverage applications. PEEK andViton offer long-term sealing and are resistantto swelling and aggressive chemicals.
Pressure transmitter with gauge display
55
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Pressure transmitters
DC • PG series pressure transmitter • Analog and switching outputs
M12 connector · Output: PNP switching and 4...20 mA / 20...4 mA, scalable analog Medium temperature range: -13…257 °F / -25…125 °C (293 °F / 145 °C max 1 hr.)
www.ifm.com
Part No.
Scalable AnalogEnd Point*
[psi]
DisplayUnits
Overpressure / Burst Pressure
[psi]
Extended Display Range
[psi]
Scalable Analog Start Point*
[psi]
Measuring Range[psi]
PG 2799-7.3…23 bar, psi145 / 43523 -14.5...16-14.5…14.5
PG 279376…580 bar, psi1450 / 5070580 -14.4...489-14.4…363
PG 279422…232 bar, psi725 / 2175232 -14.5...196-14.5…145
PG 27950…93 bar, psi435 / 145093 -14.5...78-14.5…58
PG 27967.3...58 bar, psi290 / 72558 -1.8...48.9-1.8…36
PG 27972.9...23 bar, psi145 / 43523 -0.7...19.6 -0.7…14.5
PG 279820...160 inH2O mbar, inH2O145 / 435160 inH2O -5...135 inH2O-5…100 inH2O
PG 27898...64 inH2O mbar, inH2O
Supply Voltage
[V]
18…32 DC
18…32 DC
18…32 DC
18…32 DC
18…32 DC
18…32 DC
18…32 DC
18…32 DC58 / 43564 inH2O -2...54 inH2O-2…40 inH2O
Required accessories
Description PartNo.
Type
Type
Cordsets
1.5” Tri-clamp® adapter with EPDM O-ring E 33208
2” Tri-clamp® adapter with EPDM O-ring E 33209
Weldable adapter with EPDM O-ring E 30130
* Analog scaling turndown: 4:1
For fittings other than Tri-clamp®, please call 1-800-441-8246.
Replacement Viton O-ring E 30123
Replacement EPDM O-ring,5 pieces per pack
E 30054
Replacement PEEK O-ring E 30124
Type Description PartNo.
M12 Micro DC (4-pin), 5 m, PVC EVT 001
M12 Micro DC (4-pin), 10 m, PVC EVT 002
M12 Micro DC (4-pin), 25 m, PVC EVT 003
M12 Micro DC (4-pin), 5 m, PVC EVT 004
M12 Micro DC (4-pin), 10 m, PVC EVT 005
M12 Micro DC (4-pin), 25 m, PVC EVT 006
56
Pressure sensors designed for commonhomogenizer applications
Simple pushbutton setup allows the sen-sor to be adjusted in less than 5 minutes
Each sensor has multiple outputs forflexibility
Integrated built-in display eliminates theneed for a reference gauge
Ceramic sensing element provides long-term stability of pressure measurement
Monitoring homogenizationHomogenizers are used to emulsify one liquid into another or to evenly distributesolids throughout a liquid to improve the product’s stability and other characteris-tics. In the dairy industry, milk product is pumped into a homogenizer and, undervery high pressure, pushed through small screens. This breaks up the fat globules in the milk and creates a consistent homogeneous mixture.
For repeatable process results, homogenizing pressure can be monitored andcontrolled using ifm pressure sensors designed specifically for this purpose.
PY9970 is fitted with a mounting block and diaphragm seal filled with an FDA-approved fluid. PY9000 is designed to mount with fittings already existing on the homogenizer.
Pressure sensors
www.ifm.com
ifm’s type PY pressure sensor is designed todetect the pressure in a homogenizer.
Pressure sensors for homogenizers
57
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Pressure sensors
Pressure sensors for homogenizers
Type Switchpoint Setting Range
[psi]
SupplyVoltage
[V]
Scalable AnalogStart Point*
[psi]
Scalable AnalogEnd Point*
[psi]
Overpressure /Burst Pressure
[psi]
PartNo.
M12 connector · Output: dual PNP / NPN switching outputs or PNP / NPN switching output and 4...20 mA / 0...10 V DC scalable analog
60…5800 20…32 DC0…2320 1450…5800 8700 / 14,500 PY 9970
87…8700 20…30 DC0…3480 2175…8700 11,600 / 17,400 PY 9000
DisplayUnits
psi, bar, mPa
psi, bar, mPa
Medium Temperature
Range
14…284 °F-10…140 °C
-13…212 °F (max 293 °F for 1 hour)
-25…100 °C (max 145 °C for 1 hour)
www.ifm.com
Accessories
Type Description PartNo.
Protective polyurethane cover E 30006
Cordsets
* Analog scaling turndown: 4:1
Type Description PartNo.
M12 Micro DC (4-pin), 5 m, PVC EVT 001
M12 Micro DC (4-pin), 10 m, PVC EVT 002
M12 Micro DC (4-pin), 25 m, PVC EVT 003
M12 Micro DC (4-pin), 5 m, PVC EVT 004
M12 Micro DC (4-pin), 10 m, PVC EVT 005
M12 Micro DC (4-pin), 25 m, PVC EVT 006
58
Steam pigtail protects instruments fromfailure due to excessive temperature
Simple pushbutton setup of the sensorallows for adjustment in less than 5 minutes
Ceramic pressure sensor element is morereliable than mechanical switches
Integrated 4-digit display eliminates theneed for a reference gauge
Units available with analog and switchingoutputs for DC applications and a solidstate relay output for AC applications
Steam is used in many industrial applications for food processing, drying, buildingheating, etc. with typical saturated steam parameters of 150 psi at 350 °F. Standardpressure sensors are rated below 200 °F and sanitary pressure sensors are ratedbelow 300 °F. The steam pigtail (also known as siphon or condensate loop) iscommonly used to protect instruments from exposure to high temperature.
As steam loses heat, it condenses back into water (known as condensate). The tem-perature of the condensate is much lower than the temperature of the saturatedsteam. The geometry of the pigtail allows the steam to condense through the loopand provides an isolating temperature barrier for the sensor.
The UP0011 steam pigtail from ifm includes a 1/2” NPT male process connection forthe steam line, a manual isolation valve and a 1/4” NPT male connection to fit anyof the pressure sensors on the opposite page.
Very large temperature reductions with the pigtailThe chart at right gives an approximation of the temperature reduction when using a steampigtail. Use the following steps:
1. Find steam pressure across the bottom axis.Example shows 150 psi.
2. Go straight up on the chart to the curve forambient temperature. Example shows 80 °F.
3. Go straight across to find the estimatedtemperature at the instrument. Example shows approximately 128 °F.
Pressure sensors
www.ifm.com
Steam pigtail protects ifm pressure sensors fromhigh temperatures in steam lines.
090
100
110 50Ambienttemperaturecurves (°F)
60
70
80
90
100
°F
120
130128°F
140
150
160
170
50 100 200 300 400 500 600298 338 150
psig388 422
Saturated steam pressure (saturated temperature)
Esti
mat
edin
stru
men
tte
mpe
ratu
re(°
F)
448 470 489psig°F
Pressure sensors for steamapplications
59
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Pressure sensors
DC • PN series pressure sensors
AC • PN series pressure sensors
Type Switchpoint Setting Range
[psi]
MeasuringRange[psi]
Scalable AnalogStart Point*
[psi]
Scalable AnalogEnd Point*
[psi]
Overpressure /Burst Pressure
[psi]
PartNo.
M12 connector · PNP / NPN switching and one 4…20 mA/0…10 V scalable analog output Medium temperature range: 18…176 °F / -25…80 °C
1/2” Micro AC connector · Solid state relay outputMedium temperature range: 18…176 °F / -25…80 °C
-11.5…362.5
4…363
-14.5…362.7 -14.5…145 76…362.51450 / 5075 PN 2223
-12.8…145
1…145
-14.5…145 -14.5…49.4 25.4…1451088 / 2175 PN 2224
Process Connection
1/4” NPT
1/4” NPT
Supply Voltage
[V]
20…30 DC
20…30 DC
-1.5…36.3
0.4…36.3
-1.45…36.3 -1.8…14.5 73…36.3290 / 725 PN 2226
-0.68…14.5
0.1…14.5
–
–
–
–
–
–
–
–
1450 / 5075
1088 / 2175
290 / 725
150 / 430
0…363
0…145
0…36.3
0…14.5
* Analog scaling turndown: 4:1
-0.74…14.5 -0.74…5.8 2.9…14.5145 / 450 PN 2227
PN 4223
PN 4224
PN 4226
PN 4227
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
20…30 DC
20…30 DC
90…250 AC
90…250 AC
90…250 AC
90…250 AC
www.ifm.com
Accessories
Type Description PartNo.
Steam pigtail, 1/2” NPT steam line connection UP 0011
Protective cover, polyurethane E 30006
Mounting clamp E10077
Cordsets
1/2” Micro AC (5-pin), 5 m, PVC (for PN4) E 18238
1/2” Micro AC (5-pin), 10 m, PVC (for PN4) E 18239
1/2” Micro AC (5-pin), 5 m, PVC (for PN4) E 18240
1/2” Micro AC (5-pin), 10 m, PVC (for PN4) E 18241
Type Description PartNo.
M12 Micro DC (4-pin), 5 m, PVC EVT 001
M12 Micro DC (4-pin), 10 m, PVC EVT 002
M12 Micro DC (4-pin), 25 m, PVC EVT 003
M12 Micro DC (4-pin), 5 m, PVC EVT 004
M12 Micro DC (4-pin), 10 m, PVC EVT 005
M12 Micro DC (4-pin), 25 m, PVC EVT 006
60
Thermal sensing principle with no movingparts is more reliable than mechanicalswitches
Versatile adapter system for various sanitary connections
LED bar graph display for flow andsetpoint
Easy pushbutton setup with flexiblemounting
Versions are available with standard NPTfittings for non-sanitary applications
Flow sensors for sanitary applicationsThe SI series flow sensors for sanitary applications are solid state alternatives tomechanical flow switches for sensing the flow rate of liquids and gases. Becausethere are no moving parts to jam or break, ifm efector flow switches eliminate themaintenance headaches of mechanical flow switches.
Switching output, mounts in processThe one-piece sensor includes an LED status display and stainless steel RTD probe in a compact unit. The probe is inserted directly into the medium. Applicationparameters are set using the microprocessor-based pushbutton setup. The sensordetects when the flow rate falls above or below the flow setpoint.
Multiple sanitary mounting optionsifm efector sanitary sensors connect to industry standard adapters and fittings. This flexibility allows the sensor to be easily installed in many different applicationsthat have various mounting requirements.
Flow sensors
www.ifm.com
SI Series sanitary flow sensors verify the returnflow in CIP systems. The 316 stainless steelsensing probe is resistant to damage fromsolids and harsh chemicals in the fluid stream.
Flow sensors
61
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Flow sensors
DC • Sanitary flow sensors for monitoring liquids and gases
Type Greatest SensitivityLiquids/Gases
[cm/s]
MediumTemperature
[°F/°C]
ResponseTime
[s]
Probe Length[in/mm]
SupplyVoltage
[V]
PartNo.
M12 connector · PNP · Output N.O./N.C. programmable
3...100 / 200...800-13…203 °F (-25...95 °C)
(284 °F / 140 °C max. 1 hr)1...100.79” (20 mm) 19...36 DC SI 6600
3...100 / 200...800-13…203 °F (-25...95 °C)
(284 °F / 140 °C max. 1 hr)1...101.50” (38 mm) 19...36 DC SI 6700
3...100 / 200...800-13…203 °F (-25...95 °C)
(284 °F / 140 °C max. 1 hr)1...102.17” (55 mm) 19...36 DC SI 6800
DC and AC • Flow sensors for monitoring liquids and gases in non-sanitary applications
Type Greatest SensitivityLiquids/Gases
[cm/s]
MediumTemperature
[°F/°C]
ResponseTime
[s]
Output SupplyVoltage
[V]
PartNo.
3...100 / 200...800-13…176 °F (-25...80 °C)
1...10PNP, N.O./N.C.programmable
19...36 DC SI 5010
3...100 / 20...800-13…176 °F (-25...80 °C)
1...10NPN, N.O./N.C.programmable
19...36 DC SI 5011
3...100 / 20...800-13…176 °F (-25...80 °C)
1...10AC relay, N.O./N.C.
programmable90...240 AC SI 5006
www.ifm.com
Type Description PartNo.
1.5” Tri-clamp® adapter EPDM O-ring E 33208
2” Tri-clamp® adapter EPDM O-ring E 33209
Weldable adapter EPDM O-ring E 30130
Accessories for SI 6xxx Cordsets
Type Description PartNo.
1/4” NPT adapter E 40106
1/2” NPT adapter E 40107
3/4” NPT adapter U 40085
1” NPT adapter U 40080
Accessories for SI 5xxx Cordsets
For fittings other than Tri-clamp®, please call 800-441-8246.
Protective polypropylene cover E 40203
Protective cover, polypropylene E 40203
Type Description PartNo.
M12 Micro DC (4-pin), 5 m, PVC EVT 001
M12 Micro DC (4-pin), 10 m, PVC EVT 002
M12 Micro DC (4-pin), 25 m, PVC EVT 003
M12 Micro DC (4-pin), 5 m, PVC EVT 004
M12 Micro DC (4-pin), 10 m, PVC EVT 005
M12 Micro DC (4-pin), 25 m, PVC EVT 006
Type Description PartNo.
M12 Micro DC (4-pin), 5 m, PVC EVT 001
M12 Micro DC (4-pin), 10 m, PVC EVT 002
M12 Micro DC (4-pin), 25 m, PVC EVT 003
M12 Micro DC (4-pin), 5 m, PVC EVT 004
M12 Micro DC (4-pin), 10 m, PVC EVT 005
M12 Micro DC (4-pin), 25 m, PVC EVT 006
Replacement Viton O-ring E 30123
Replacement EPDM O-ring,5 pieces per pack
E 30054
Replacement PEEK O-ring E 30124
1/2” Micro AC (5-pin), 5 m, PVC (for PN4) E 18238
1/2” Micro AC (5-pin), 10 m, PVC (for PN4) E 18239
1/2” Micro AC (5-pin), 5 m, PVC (for PN4) E 18240
1/2” Micro AC (5-pin), 10 m, PVC (for PN4) E 18241
62
TP module turns any RTD into a program-mable analog temperature transmitter
TP available in various pre-settemperature ranges
TP offers compact size with “Lock in Place”M12 connectors
New RTDs offer one piece sanitarysolution for temperature applications
New RTDs provide excellent response timeand high precision using a Pt100, class Aelement
Temperature modules and RTDs
www.ifm.com
TP transmitter modules andRTDs with integrated Tri-clamp®
connections
TP module turns any RTD into a programmableanalog temperature transmitter
The innovative TP transmitter module with “plug and play” M12connectors solves the common installation and environmental prob-lems associated with conventional terminal chamber-head transmitters.
Error sources from screw terminals, wiring mistakes, and fluid ingressare eliminated. An integrated LED gives local indication that thetransmitter is powered and transmitting.
Completely configurableCompatible with any Pt100 or Pt1000 probe, the TP temperaturemodule verifies the type of RTD and automatically makes the correctsettings. Usable with 2, 3, or 4-wire RTDs, the TP can be scaled andoffset using ifm’s USB interface. With it’s “overmolded” construction,the TP is suitable for harsh environments allowing for use in almost any application.
New RTDs with integrated Tri-clamp® process connectionsThe TM 48xx and TM 49xx RTDs do not require a separate sanitaryprocess adapter. The one-piece RTD probe with integrated Tri-clampconnection eliminates potential septic ingress points.
ifm’s revolutionary design incorporates a very thin sensor sheath whichminimizes the amount of thermal mass separating the RTD elementfrom the process media. This innovative design results in an extremelyfast 1…3 second response speed.
The RTD probes can be used with a RTD card on a plc rack, on atemperature controller and on ifm’s TR sensors (pages 68 - 69).
Bulky traditional headtransmitters are costly
and are subject tomoisture ingress.
ifm’s compact TPtransmitter is rated to
withstand liquid ingressand provide reliable
temperature indication
Challenge Solution
TP module
RTD withintegratedTri-clampconnection
63
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Temperature modules and RTDs
Transmitter modules
Pt100 RTD probes
Type Output PartNo.
TP temperature transmitter module · Analog output
4…20 mA TP 3233
4…20 mA TP 3232
4…20 mA
SupplyVoltage
[V]
20...32 DC
20...32 DC
20...32 DC TP 3231
Factory Preset Range
0…300 °F(-18…149 °C)
-58…572 °F(-50…300 °C)
-58…302 °F(-50…150 °C)
Scalable AnalogStart Point
-58…563 °F(-50…295 °C)
-58…563 °F(-50…295 °C)
-58…563 °F(-50…295 °C)
Scalable AnalogEnd Point
-49…572 °F(-45…300 °C)
-49…572 °F(-45…300 °C)
-49…572 °F(-45…300 °C)
InSteps of
0.1 °F(0.1 °C)
4…20 mA TP 323720...32 DC32…212 °F(0…100 °C)
-58…563 °F(-50…295 °C)
-49…572 °F(-45…300 °C)
0.1 °F(0.1 °C)
0…10 V TP 923718...32 DC32…212 °F(0…100 °C)
-58…563 °F(-50…295 °C)
-49…572 °F(-45…300 °C)
0.1 °F(0.1 °C)
0.1 °F(0.1 °C)
0.1 °F(0.1 °C)
Type Process Connection
PartNo.
Pt100 RTD probes, 316L stainless steel*
1” / 1.5” Tri-Clamp® TM 4801
InsertionDepth
1.2” (30 mm)
RTD Diameter
6 mm
Temperature Range°F (°C)
-58…302 °F(-50…150 °C)
Response TimeT05 / T09 (s) **
1 / 3
1” / 1.5” Tri-Clamp® TM 48111.9” (50 mm) 6 mm-58…302 °F
(-50…150 °C)1 / 3
1” / 1.5” Tri-Clamp® TM 48313.9” (100 mm) 6 mm-58…302 °F
(-50…150 °C)1 / 3
1” / 1.5” Tri-Clamp® TM 48415.9” (150 mm) 6 mm-58…302 °F
(-50…150 °C)1 / 3
2” Tri-Clamp® TM 49011.2” (30 mm) 6 mm-58…302 °F
(-50…150 °C)1 / 3
2” Tri-Clamp® TM 49111.9” (50 mm) 6 mm-58…302 °F
(-50…150 °C)1 / 3
2” Tri-Clamp® TM 49313.9” (100 mm) 6 mm-58…302 °F
(-50…150 °C)1 / 3
2” Tri-Clamp® TM 49415.9” (150 mm) 6 mm-58…302 °F
(-50…150 °C)1 / 3
Type Description PartNo.
M12 Micro DC (4-pin), 2m, PVC EVT 043
M12 Micro DC (4-pin), 5m, PVC EVT 044
M12 Micro DC (4-pin), 10m, PVC EVT 045
Optional patchcords (for remote mounting)Component guide
Direct mountfor pipes and tanks
TPTransmitter
TPTransmitter
Patchcord
RTD Probe
RTD Probe
Remote mountfor pipes and tanks
A
CordsetD
A
C
B
B
* For additional RTD probes, please see page 69.** T05 / T09 is the time to reach 50% / 90% of temperature change.
B
C
A
NEW
CordsetD
Cordsets
Type Description PartNo.
M12 Micro DC (4-pin), 5 m, PVC EVT 001
M12 Micro DC (4-pin), 10 m, PVC EVT 002
M12 Micro DC (4-pin), 5 m, PVC EVT 004
M12 Micro DC (4-pin), 10 m, PVC EVT 005
D
D
64
Modular solution for RTD with display andswitching / transmitter output
Multiple RTD lengths for use in small pipesup to large tanks
High temperature ranges ideal for moni-toring food processing and pasteurizing
Variety of sanitary fittings and adaptersavailable
Temperature sensors
www.ifm.com
Control monitor
A
Mounting set / adapter
Pt100 RTD probe
Thermowellprocess connection
B3
C3
D3
Controlmonitor
A
Mountingset / adapter
Pt1000RTD probe
Process connection
B2
C2
D2
Controlmonitor
A
Mountingset
Pt1000 RTD probe
Process connection
B1
C1
D1
Component guides
Direct mount, fixed insertion depth for small pipes
Direct mount, variable insertion depth for pipes and tanks
Thermowell mount for large pipes and tanks
Modular approach forapplication flexibilityifm’s modular temperaturesystem allows you to specify standard compo-nents that ship from stockto create a custom solutionfor your application
Temperature sensors
Enclosure-free, local display provides temperature readingsat-a-glance.
65
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Temperature sensors
Control monitor for separate temperature sensors
Type PartNo.
Control monitor · PNP / NPN switching and 4…20 mA / 0…10 V scalable analog outputs
TR 2432
SwitchpointSetting Range
InSteps of
Scalable Analog Start Point
Scalable Analog End Point
SupplyVoltage
[V]
-40…572 °F-40…300 °C
0.1 °F0.1 °C
-40…563 °F-40…295 °C
-31…572 °F-35…300 °C
20...30 DC
www.ifm.com
Type Usable RTDLength
RTDDiameter
[mm]
TemperatureRange
Response TimeT05 / T09 *
[s]
PartNo.
Mounting sets / adapters / fittings
Mounting set for TM RTDs E 30089
A
B1
Process connections
1.5” Tri-clamp® adapter with EPDM O-ring E 33008
2” Tri-clamp® adapter with EPDM O-ring E 33009
D1 D2
Weld-in thermowell for TT1081 E 35210
Weld-in thermowell for TT2081 E 35220
D3
Mounting set for TT RTDs E 30017
Sanitary adapter for Tri-clamp® fittings E 34110
Mounting set for TT RTDs E 30017
Gasket seal fitting for thermowells E 30018
B3
Pt100 and Pt1000 RTD probes**
1.2 inch (30 mm) 10 -40…302 °F (-40…150 °C) 5/14 sec TM 9061
1.9 inch (50 mm) 10 -40…302 °F (-40…150 °C) 5/14 sec TM 0061
3.9 inch (100 mm) 10 -40…302 °F (-40…150 °C) 5/14 sec TM 1061
C1
2.0 inch (50 mm) 10 -40…302 °F (-40…150 °C) 1 / 3 sec TT 0061
3.9 inch (100 mm) 10 -40…302 °F (-40…150 °C) 1 / 3 sec TT 1061
C2
3.9 inch (100 mm) 10 -40…302 °F (-40…150 °C) 1 / 3 sec TT 1081
7.9 inch (200 mm) 10
RTDElement
Pt1000
Pt1000
Pt1000
Pt1000
Pt1000
Pt100
Pt100 -40…302 °F (-40…150 °C) 1 / 3 sec TT 2081
C3
Cordsets and accessories
Protective cover E 30006
Mounting clamp for TR sensor E 10077
* T05/T09 is the time to reach 50% / 90% of temperature change.** RTD probes and patchcords on page 67 can be used with TR sensors
for remote mounting and display.
B2
For fittings other than Tri-clamp®, please call 800-441-8246.
Type Description PartNo.
M12 Micro DC (4-pin), 5 m, PVC EVT 001
M12 Micro DC (4-pin), 10 m, PVC EVT 002
M12 Micro DC (4-pin), 25 m, PVC EVT 003
M12 Micro DC (4-pin), 5 m, PVC EVT 004
M12 Micro DC (4-pin), 10 m, PVC EVT 005
M12 Micro DC (4-pin), 25 m, PVC EVT 006
66
2-wire analog output (4...20 mA)
Fully enclosed and sealed 316 stainlesssteel construction
High accuracy across Pt1000 RTD sensorelement
Wide temperature range with quickresponse time
Flexible mounting with standardTri-clamp® fittings
Compact temperature transmitter with excellent response timesThe TA series temperature transmitter offers a compact measuring system that canbe easily installed with standard Tri-clamp® and weldable fittings.
The transmitters are available with fixed 4 - 20 mA analog output and measuringranges of 32…284 °F and 14…302 °F. They feature Pt 1000 RTDs with an accuracyof better than ±0.7 °F over the entire range of the transmitter.
With its fast response time of 3 seconds, the TA Series temperature transmitter is an ideal choice for critical temperature monitoring applications.
Temperature transmitters
www.ifm.com
Bulky head-and-wellassemblies with opencavities are subject toliquid ingress and do
not have localizeddisplays.
ifm’s compact temper-ature transmitter
features a zero-leakdesign that resists
liquid ingress.
Challenge Solution
Temperature transmitters
67
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Temperature transmitters
DC • Temperature transmitters with fixed range • Self-contained
Type PartNo.
Temperature transmitter · M12 connector · Output: 4...20 mA fixed analog
TA 3430
TA 3431
www.ifm.com
Accessories
Type Description PartNo.
Weldable adapter E 30055
1.5” Tri-clamp® adapter E 33401
2” Tri-clamp® adapter E 33402
Cordsets
Probe Length[mm]
Temperature Range
[°F]
Dynamic ResponseT05 / T09*
[s]
87.5 32...284 1 / 3
87.5 14...302 1 / 3
ProcessConnection
G 1/2 BSPP
G 1/2 BSPP
Supply Voltage
[V]
10…30 DC
10…30 DC
*T05/T09 is the time to reach 50% / 90% of temperature change.
Type Description PartNo.
M12 Micro DC (4-pin), 5 m, PVC EVT 001
M12 Micro DC (4-pin), 10 m, PVC EVT 002
M12 Micro DC (4-pin), 25 m, PVC EVT 003
M12 Micro DC (4-pin), 5 m, PVC EVT 004
M12 Micro DC (4-pin), 10 m, PVC EVT 005
M12 Micro DC (4-pin), 25 m, PVC EVT 006
68
2-wire transmitter allows for easyinstallation
Scalable analog and diagnostic outputsprovide process temperature and driftwarning/alarm conditions
Variety of sanitary fittings and adaptersavailable
Dual RTD design allows for self-verifyingdrift detection
Eliminates need for regular and costlycalibration checks
Increased process safety The TAD temperature transmitter features two high-precision and stable RTD meas-uring elements that monitor the process to ensure that a developing sensor drift isdetected and reliably diagnosed. If one element fails, the process continues with the second measuring element (back-up function). Thus, no calibration is necessary.With this technology, the TAD provides long-term, highly accurate temperatureindication in sanitary applications included in food, beverage and pasteurizationprocesses.
Using configuration software, drift thresholds and parameters can be easily set.After the setpoints are established, the TAD continuously self-monitors temperaturedrift. By providing immediate temperature drift detection, cyclical monitoring is nolonger necessary.
Temperature transmitters
www.ifm.com
The TAD offers a flexible mounting system thatfits a variety of sanitary process connections.
efector TAD: cost savingsup to 95%
When compared to a typicalRTD / transmitter systemthat requires regular calibra-tion (2x per year), the TAD temperature sensor providesa significant cost savingsover a five year period.
0 20 40 60 80 100
RTD/transmitter
TADsensor
Cost comparison: conventional sensor has tobe calibrated twice a year vs. TAD sensor
share of costs [%]
sensor costinstallation costcalibration cost
Self-verifying temperature transmitters
69
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Temperature transmitters
DC • Temperature transmitter with self-verifying drift detection
Type
Temperature transmitter · M12 connector · Analog and switching
www.ifm.com
Accessories
Type Description PartNo.
Replacement Viton O-ring E 30123
Replacement EPDM O-ring, 5 pieces per pack
E 30054
1.5” Tri-clamp® adapter with EPDM O-ring E 33208
2” Tri-clamp® adapter with EPDM O-ring E 33209
Weldable adapter with EPDM O-ring E 30130
Programming device for setting drift limits and scaling analog output
E 30396
Replacement PEEK O-ring E 30124
Cordsets
RTDLength[mm]
PartNo.
33 mm 3/6 sec TAD 981
TemperatureResponse of RTD
T05 / T09*
Output Scalable Analog Start
Point
-13…212 ºF(-25…100 ºC)
4…20 / 20…4 mA anddiagnostic PNP/NPN
87.5 mm 3/6 sec
18…32 DC
SupplyVoltage
[V]
18…32 DC TAD 181-13…212 ºF
(-25…100 ºC)
Scalable Analog End
Point
77…302 ºF(25…150 ºC)
77…302 ºF(25…150 ºC)
4…20 / 20…4 mA anddiagnostic PNP/NPN
* T05 / T09 is the time to reach 50% / 90% of temperature difference.
Drift DetectionSetting Range
0.4…9.0 ºF0.20…5.00 ºC
0.4…9.0 ºF0.20…5.00 ºC
InSteps of
0.1 ºF0.05 ºC
0.1 ºF0.05 ºC
For fittings other than Tri-clamp®, please call 800-441-8246.
Type Description PartNo.
M12 Micro DC (4-pin), 5 m, PVC EVT 001
M12 Micro DC (4-pin), 10 m, PVC EVT 002
M12 Micro DC (4-pin), 25 m, PVC EVT 003
M12 Micro DC (4-pin), 5 m, PVC EVT 004
M12 Micro DC (4-pin), 10 m, PVC EVT 005
M12 Micro DC (4-pin), 25 m, PVC EVT 006
70
Sanitary PEEK sensing tip with food-gradesurface finish
Ideal for sensing viscous and sticky media
High frequency capacitance technologyprovides reliable level indication
316 stainless steel body ensures chemicalcompatibility with harsh cleaning agents
Pre-adjusted for media type, no fieldadjustments necessary
No obstruction to flow path or bridgingof sensor tips
Level sensors
www.ifm.com
LMT point-level sensor ignoresfoam and deposit build-up
The LMT sensormonitors the level ofmayonnaise in acontainer using ahigh-frequencycapacitance spectrum profilingtechnology.
With a layer ofresidue left behind,the LMT can reliablydistinguish betweena full tank vs. a surface residuecoating.
Reliable point-level control solutionifm’s LMT Series point-level sensor is designed to monitor thelevel of liquids, viscous media and powders in food and bever-age applications. The sensor uses a high-frequency capacitancespectrum profiling technology to effectively eliminate challengeswith deposits, residue and foam build-up that commonly causetraditional point-level sensors to output false signals.
The LMT sensor attaches to various mounting adapters toprovide a true sanitary mounting system. Typical applicationsinclude monitoring point-level in storage tanks and protectingpumps from run-dry conditions.
Plug and play setupThe LMT sensors are factory adjusted for specific media whicheliminates sensitivity adjustments and makes installation fastand simple. A compact sensor tip makes integration simple –even in small 1” pipes.
Meets food and beverage sanitary requirementsThe sensor’s 316 stainless steel body and smooth food-gradePEEK sensing tip ensures chemical compatibility even with theharshest cleaning agents. A high protection rating of IP68/IP69Kprevents liquid ingress. Laser-etched part numbers won’t deteri-orate in high pressure cleanings.
71
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Level sensors
DC • LMT level sensor
Type
Level switch · output function N.O. / N.C. complementary · 4-wire DC PNP
www.ifm.com
Required accessory: select one adapter
Type Description PartNo.
Sanitary 2” Tri-clamp® adapter with leakage ports for 3A conformance
E 43312
Sanitary weldable adapter for tanks with leakage ports for 3A conformance
E 43309
Sanitary weldable adapter for pipes with leakage ports for 3A conformance
E 43310
Sanitary 1.5” Tri-clamp® adapter with leakage ports for 3A conformance
E 43311
Sanitary weldable adapter for pipes E 43301
Sanitary weldable adapter for tanks E 43300
Sanitary Varivent® DN40 (D=68) adapter E 43307
Sanitary Varivent® DN25 (D=50) adapter E 43306
G1 BSPP adapter E 43303
G3/4 BSPP adapter E 43302
G1/2 BSPP sealing plug E 43308
3/4” NPT adapter E 43313
Cordsets
Media selection guide
Type Description PartNo.
PartNo.
-14.5…232 LMT 100
Maximum ProcessPressure
(psi)
Process Connection
MediumTemperature
(°F)
32…185 ºF(302 ºF for 1 hour)
G1/2 BSPP 18…30 DC
SupplyVoltage
[V]
Application
Water-based mediahigh dielectric
-14.5…232 LMT 11032…212 ºF
(302 ºF for 1 hour)G1/2 BSPP 18…30 DC
Oils, fats, bulk medialow dielectric
Medium LMT100 LMT110
Alcohol uBeer uButter uChocolate (at 40 °C) uCIP-fluid uCocoa powder uCream uDough uEgg white uEgg yolk uFat uHoney uJam uKetchup uMayonnaise uMilk uOlive oil uPepper (ground) uPowdered milk uSalt uSugar (granulated sugar) uWater (distilled) u
NEW
M12 Micro DC (4-pin), 5 m, PVC EVT 001
M12 Micro DC (4-pin), 10 m, PVC EVT 002
M12 Micro DC (4-pin), 25 m, PVC EVT 003
M12 Micro DC (4-pin), 5 m, PVC EVT 004
M12 Micro DC (4-pin), 10 m, PVC EVT 005
M12 Micro DC (4-pin), 25 m, PVC EVT 006
Actuator Sensor-interfaceoverview
www.ifm.com
AS-i is a simple solution for networking actuators and sensorsAn AS-interface network offers a simple, cost-efficientalternative to conventional cabling at the lowest level of theautomation. This network can operate directly in conjunctionwith an existing PLC or can be linked to a higher-level bussystem for low-cost remote I/O.
AS-interface is tailored to the needs of devices such assensors and actuators where low connection cost per node is critical and simplicity is essential.
Global support for AS-interfaceifm engineers can help design and implement an AS-interfacenetwork on industrial equipment. On-site technical support isavailable and application assistance is immediate by callingour technical support hotline: 800-441-8246.
Aggressive product development ifm is committed to investing in new product developmentfor AS-interface. Our goal is to improve functionality, simplifyinstallation and maintain competitive price points.
Before
Point-to-point wiring is stillthe most common wiringmethod found in industry.One cable from each deviceresults in large wire bundlesrunning through the system.Due to the sheer volume ofwires, installation time isconsiderable and trouble-shooting is complex.
After
AS-i network connects multi-ple binary devices with onlyone 2-wire cable, completelyeliminating wire bundles. Itssimple, plug-and-play wiringsupports all topologies andeliminates device profiles andexpensive hardware.
Point-to-point wiring vs. AS-i networkingIndustrial automation systems require a large amount ofcontrol devices. The number of binary actuators and sen-sors placed on a typical system has grown over the years.
Current methods for wiring include point-to-pointconnection or bus systems. However, point-to-pointwiring results in large wire bundles, and bus systems canbe too complex for networking simple binary devices.
As a solution to these challenges, ifm offers the ActuatorSensor interface (AS-i), a simple network for actuatorsand sensors. AS-i is cost-effective, easy to install, andfeatures modular components that offer designflexibility. AS-i is a complete networking solution forindustrial control applications.
The AS-i network connects hundreds of sensors on a single two-wire cable. AS-iI/O modules use quick plug-and-play functionality that simplifies installation.
ifm is an AS-interface founding memberifm efector is one of 11 founding members of the
AS-Interface Association, established in 1990. AS-i is anon-profit independent organization that is currently
supported by more than 100 vendors worldwide.
72
Industrial Ethernet (IE) is commonly applied as the networking protocol for automationand plant control. IE is well known in industry, can carry large packets of data, and isideal for HMIs, PLCs, drives, and barcode scanners.
For bit-level data such as sensors and actuators – whichaccount for 90% of devices in automation – a lower levelI/O network, such as AS-i, is better suited for these devices.
AS-i offers a better alternative to wiring bit-level devicesand is an ideal complement to Industrial Ethernet at the I/Olevel. A single Ethernet IP address can transmit up to 992I/O points. AS-i uses quick plug-and-play functionality thatsimplifies installation in the controls architecture.
Actuator Sensor-interface overview
Extremely fast system Data transfer is fast – less than 10 ms on a fully-loaded system of 248inputs and 186 outputs.
Flexible topologyAS-i supports topologies including open tree, ring, star, and trunk anddrop lines to allow maximum design freedom.
Cost effectiveSince actuators and sensors are among the least expensive devices on a network, their connecting hardware should be comparable in price.AS-i’s price-per-point is one of the best in industry.
A simple 2-wire flat cableThe normal collection of wire bundles are replaced by a single, two-wireflat cable that carries both data and power.
Modular systemAS-i’s design flexibility makes it a true plug-and-play networking system.Modular machines can be easily connected with the aid of splittermodules to form a production line.
Insulation displacementInsulation displacement technology enables fast connection to alldevices. The cable is pierced to make the electric connection andfeatures a mechanical profile to proper insure polarity.
Best fitActuator and sensor manufacturers developed AS-i for the sole purposeof connecting actuators and sensors. Every component on the networkis specially designed to fit these binary devices.
www.ifm.com
Input/output
Processing
Control
Visual
Today’s networks with Industrial Ethernet
Ethernet IPProfiNet Modbus TCP
AS-i networking
Controlroom
Industrial Ethernet and AS-i networking offer the best of both worlds
73
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Actuator Sensor-interfaceoverview
www.ifm.com
AS-i Master / GatewayControls the data transfer for the AS-i network.
AS-i Power SupplyCouples power and signal together for transmissionover the 2-wire flat cable.
Cabinet ModuleDesigned to be an inexpensive solution forconnecting control cabinet I/O to the AS-i network.
Compact Field ModuleDesigned specifically for harsh environments.
Field ModulesIP67 module features a mounting technology thatdoes not require tools for installation.
Pneumatic Output Modules4 inputs and 1 or 2 solenoid outputs integrated into one housing.
Splitter ModuleAllows for maximum flexibility in both the design and commissioning phases of a project.
AS-i system overviewAll of the components needed to create a complete AS-i system are illustrated in this overview. Because of its flexibility, an AS-i system has unlimited design capabilities.Choose from a variety of masters, I/O modules, power supplies and accessoriesdepending on your current controls platform and application environment.
Technical specifications:• 62 nodes per master
• 4I/4O maximum per node (248 inputs/248 outputs per master)
• 100m network length (up to 300m with repeaters)
• Less than 10 ms scan time on a fully loaded system (62 nodes)
1
1 2
3
2
3
4
4
5
5
6
6
7
7
74
Actuator Sensor-interface overview
www.ifm.com
Controllers and gatewaysVarious controller options are availableto fit directly to a PLC or connected tohigher-level networks such as EtherNetIP, Profibus, etc... A stand-alone optionis available that can act as a PLC.
Input/output modules I/O modules are used to connect discreteand analog devices to the AS-i network.A variety of housings are available basedon environmental conditions.
AS-i sensorsAS-i intelligent sensors can be connect-ed directly onto the network withoutthe need for an I/O module.
AccessoriesA variety of accessories are availableto help connect nodes and peripherydevices to the AS-i system. In addition,products for extending the network,diagnosing faults and addressing modules are also available.
Wiring solutionsVarious AS-i splitters and branchingmodules can be used to provide maximum flexibility when designingand commissioning a project.
Power suppliesAS-i power supplies provide power fornetwork modules and input devices.Also, 24 VDC power supplies are usedto provide power to output devices overthe AS-i network.
75
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
AS-i Controllers provide direct connectionof AS-i to DeviceNet, EtherNet/IP andProfibus
Single or dual master options available for application versatility
User-friendly display for setup anddiagnostics
AS-i Backplane Masters provideconnection of AS-i to most PLCs
AS-i can be connected to existing control platforms in two different ways:
Controls and gateway connectionIn many cases, a high level bus system is installed in the plant. These bus systemsare designed for complex controls equipment such as drives, bar code scanners, etc.These networks are not optimized for simple on/off devices, such as sensors.Therefore, an easy way to apply an AS-i network is via a gateway connection. The gateway becomes a node on the higher level bus and allows the connection of sensors and actuators at a competitive price point.
ifm's AS-i Controller-E is designed for DeviceNet and Ethernet IP networks. TheSmartLink DP is available for Profibus networks. All of ifm's controllers incorporateuser-friendly displays for setup and diagnostics and fast response of up to 992digital I/O points using version 3.0.
Backplane master connectionBackplane masters are designed to fit into a standard card slot in a PLC rack. ifm'sbackplane masters are available with single or dual master options. The dual masteris capable of communicating with 992 digital I/O points. Inputs and outputs aremapped directly to the I/O tables in the plc and programmed via the standard plcsoftware. No additional software is required.
Bus system AS-interface
www.ifm.com
Actuator Sensor Interface networks binarydevices with only one 2-wire yellow cable,completely eliminating wire bundles.
Controllers, gateways andbackplane masters
76
Bus system AS-interface
AS-i stand-alone controllers and gateways
AS-i backplane masters
Type Numberof AS-i Masters
ProgrammingData
Interface
PartNo.
CurrentConsumption
From AS-i [mA]
www.ifm.com
AS-i Ethernet / IP Controller-E · Full master functions · Graphic display
1 — AC 1327
2 —
Fieldbus Interface
Ethernet IP
Ethernet IP
AS-iVersion
3.0
3.0
Current ConsumptionFrom 24 V DC
[mA]
Type Numberof AS-i Masters
Application PartNo.
I/O and Configuration
< 400
< 400 AC 1337
< 10
< 10
AS-i Profinet Gateway · Full master functions · Color graphic display
1 Ethernet RJ 45 AC 1401
2 Ethernet RJ 45
Profinet
Profinet
3.0
3.0
< 500
< 500 AC 1402
< 10
< 10
SmartLink DP · AS-i gateway / Profibus DP · Full master functions · Graphic display
1 — AC 1375
2 —
Profibus DP
Profibus DP
3.0
3.0
—
< 400 AC 1376
< 200
< 10
AS-i DeviceNet Controller-E · AS-i controller with DeviceNet interface · Full master functions · Graphic display
1 — AC 1318
2 —
DeviceNet
DeviceNet
3.0
3.0
< 500
< 500 AC 1324
< 10
< 10
2AS-i master for SLC5 PLC platform U 71000248 inputs and 248 outputs. Configuration via
Allen-Bradley’s RSLogix software package.AS-i version 3.0
1AS-i master for Compactlogix and Micrologix
1500 PLC platformsU 71003
248 inputs and 248 outputs. Configuration viaAllen-Bradley’s RSLogix software package.
AS-i version 3.0
2AS-i master for Controllogix PLC platforms U 71005248 inputs and 248 outputs. Configuration via
Allen-Bradley’s RSLogix software package.AS-i version 3.0
77
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Bus system AS-interface
www.ifm.com
Couples and de-couples power and signalfor transmission over the network
Compact housing with DIN rail occupiesminimal cabinet space
High efficiency design generates less heatand eliminates external cooling
Selectable 115/230 VAC input voltagewith short circuit and overload protection
Power for the yellow AS-i cableAS-i power supplies supply all devices connected to the yellow AS-icable. These are usually modules, connected sensors and intelligent actu-ators. They provide an increased voltage of approximately 30 volts whichis converted by the modules into 24 V required for input devices.
In order to ensure the decoupling between AS-i data and the supply,only approved AS-i power supplies may be used. AS-i is an unshieldedbus system that transports data and supplies energy on the same pair ofconductors. Because the AS-i network is an unshielded system, the volt-age must not be grounded for reasons of symmetry.
Standard 24 V power supplies cannot be used instead of AS-i powersupplies for network power.
AS-i power supplies
78
Bus system AS-interface
Power supplies
Type Dimensions
[mm]
Output Current AS-i
[A]
PartNo.
45 x 90 x 100 0.95 AC 1220
Output Voltage AS-i
[V]
29.5…31.6 DC
Nominal Voltage
[A]
100…240 AC (± 10%)
Efficiency
[%]
η = 86
45 x 90 x 100 1.9 AC 122129.5…31.6 DC 100…240 AC (± 10%) η = 88
50 x 129 x 136 2.8 AC 123629.5…31.6 DC 100…240 AC (± 10%) η = 88
50 x 129 x 136 4 AC 124429.5…31.6 DC 100…240 AC (± 10%) η = 88
79
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Power supply
91 x 131 x 96 8 AC 121829.5…31.6 DC 115/230 AC η = 92
120 x 134 x 118 2 x 4 AC 12122x
29.5…31.6 DC115/230 AC η = 87
www.ifm.com
Bus system AS-interface
www.ifm.com
DIN rail mountable modules designed forcabinet or junction box applications
Removable combicon connectors includedfor easy connection to periphery devices
Low profile models available for smallenclosures
Integrated socket for easy addressing
Robust DIN rail mounting
Space-saving modules for DIN rail mountingSmartLine modules are DIN rail mountable and designed for cabinet or junction boxapplications. The 25 mm wide housing can contain up to 4 inputs and 4 outputs.
Addressing is carried out via the online addressing socket on the front panel. Theonline addressing socket allows addressing of the module before and after mount-ing. The supply voltage and the peripheral signals are connected at the top and atthe bottom by means of plug-in Combicon connectors. These can be equippedeither with screw terminals or insulation displacement terminals by the customer.
Cabinet I/O modules
80
AS-i SmartLine I/O-modules for the control cabinet
Type Dimensions
[mm]
No. ofInputs
No. / Typeof Outputs
Max. Input Currentper Module
[mA]
Output Current perChannel / Total
[A]
AS-iProfile
AS-iVersion
ExtendedAddressing
Mode
PartNo.
25 x 114 x 105 4 – 200 – S-0.A.E. 2.1 yes AC 2250
50 x 114 x 105 4 4 relay 200 6 / 6 S-7.0.E. 2.1 no AC 2258
25 x 114 x 105 – 4 PNP — 1 / 4 S-8.0.E. 2.1 no AC 2252
25 x 114 x 105 4 4 PNP 200 1 / 4 S-7.0.E. 2.1 no AC 2251
25 x 114 x 105 4 3 PNP 200 1 / 3 S-7.A.E. 2.1 yes AC 2264
25 x 114 x 105 4 4 PNP 200 1 / 4 S-7.A.7 3.0 yes AC 2267
25 x 114 x 105 4 2 relay 200 6 / 6 S-7.A.E. 2.1 yes AC 2255
Bus system AS-interface
81
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Description PartNo.
Addressing unit AC 1154
Cable for addressing unit E 70213
Accessories
Type
www.ifm.com
Technical SpecsOutput voltage supply AC 2267: 24 VDC power supply for inputs
and outputs
Output voltage supply other models: AS-i power supply for inputs only and 24 VDC power supply for outputs only
ProcessLine AS-i stainless steel modulesfor use in sanitary applications
Resistant to standard cleaning agents(Ecolab tested)
AS-i and 24 V supply via common M12connector
For direct use in wet areas (protectionratings IP 68 and IP 69 K)
AS-i splitters – high-grade stainless steel flat cable insulation displacementconnector suitable for field use
Designed specifically to withstand extreme environmentsThe ProcessLine I/O module housing is 316 stainless steel and can withstand bothchemical and mechanical abuse. Its round housing does not have seams or edges,which reduces deposit buildup. The module’s housing is corrosion resistant againstmost chemicals and is rated IP69K to withstand high-pressure water sprays. Themodule features 4 inputs / 3 outputs and uses an M12 process connection.
316 stainless steel T-splitter for connection to the AS-i networkThe ProcessLine T-splitter is the first AS-i splitter designed to withstand extremeenvironments. The T-Splitter is 316 stainless steel and can be mounted directly inharsh and abrasive environments. The splitter converts the yellow and black AS-i flat cables into a single 4-pin M12 connector or can be used to branch out the AS-i network. This is typically used to connect the ProcessLine I/O module to the AS-i network. The T-Splitter has a compact, space-saving design and is easilymounted with two screws.
Bus system AS-interface
www.ifm.com
Stainless steel field I/O modules
82
Bus system AS-interface
AS-i ProcessLine I/O modules for field applications
Type PartNo.
AC 2900
AC 2904
AC 2910
AC 2916
www.ifm.com
Cables and patchcords
Type Description PartNo.
Splitter accessories
Type Description PartNo.
Flat cable, AS-i and auxiliary, to 4-pin femaleM12 Micro DC connector, 316 stainless steel,
EPDM O-ringE 70354
Flat cable to 4-pin female M12 Micro DCconnector, 316 stainless steel,
EPDM O-ringE 70454
Flat cable splitter, two channel, AS-i or auxiliary,8 A current rating, 316 stainless steel,
EPDM O-ringE 70377
AS-i flat cable yellow EPR
AC 4000
AS-i flat cable for auxiliary powerblack EPR
AC 4002
AS-i flat cable, grey PVC U 71002
M12 Micro DC (5-pin), 0.3 m, PVC EVT 058
M12 Micro DC (5-pin), 0.6 m, PVC EVT 059
M12 Micro DC (5-pin), 1 m, PVC EVT 060
M12 Micro DC (5-pin), 2 m, PVC EVT 061
M12 Micro DC (5-pin), 5 m, PVC EVT 062
M12 Micro DC (5-pin), 10 m, PVC EVT 063
83
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Dimensions
[mm]
No. of Inputs
AS-iVersion
Ø137.3 x 808
passive splitter
No./Typeof Outputs
—
Max. Input Currentper Module
[mA]
—
Output Current perChannel / Total
[A]
4 / 4 —
ExtendedAddressing
Mode
—
AS-iProfile
—
Ø137.3 x 80 4 3 PNP 200 0.7 / 2.1 2.1 yesS-7.A.E.
Ø137.3 x 80 8 — 400 — 2.1 yesS-0.A.E.
Ø137.3 x 804 x
4…20 mA— — —
2.11 and3.0
noS-7.3.E.
84 www.ifm.com
Robust design and compact metal housingprovide long life and reliability
CMOS image sensor and digital signalprocessor with no moving parts
Reliably reads dot-peened, laser etchedand printed data matrix codes
Configurable four-quadrant lightingimproves readability, reduces glare
Easy application Setup Wizard offersstep-by-step instruction with advancedfunctionality
Reliable identification of data matrix and 1D codesThe ifm Multi-Code Reader is designed to read 2D data matrix codes and 1D barcodes in high speed industrial automation applications.
The versatile Multi-Code Reader can identify, verify and qualify most markingmethods including dot-peened, laser-etched and printed data matrix codes as wellas printed barcodes.
The Multi-Code Reader features a maximum speed of 7 meters/second. The unitreads three types of 2D codes: ECC200, PDF-417 and QR as well as 26 styles ofprinted barcodes.
Additional application examples
Identification systems
Laser-etched code on glass
Challenge: Laser-etchedcode on glass can bedifficult to read due tolow contrast.
Solution: ifm's Multi-Code Reader featuresintegrated lighting, aCMOS image sensor anddigital signal processorto identify and read low-contrast codes.
Printed code on plastic
Challenge: Printed code on plastic parts can wear or disintegrateover time.
Solution: The Multi-Code reader reliablydetects printed codesthat become damagedor soiled – even if up to28% of the informationis damaged.
Integrated lightingsystem can eliminateexternal lighting and reduce total installcosts.
The Multi-Code Readerfeatures a maximumspeed of 7 meters/second. The unit readsthree types of 2Dcodes: ECC200, PDF-417 and QR aswell as 26 styles ofprinted barcodes.
Multi-code readers
85www.ifm.com
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Identification systems
DC • Multi-code reader
Type Dimensions
[mm]
Maximum Field ofView Size
[mm]
Type of LightLED
Motion SpeedInt./Ext. Lighting
[m/s]
ProcessInterface
PartNo.
8-pin · M12 connector
60 x 42 x 53.5 68 x 50 red light 7 Ethernet TCP/IP, EtherNet/IP, RS-232 O2I 100
60 x 42 x 53.5 68 x 50 infrared 7 Ethernet TCP/IP, EtherNet/IP, RS-232 O2I 101
60 x 42 x 53.5 140 x 100 red light 7 Ethernet TCP/IP, EtherNet/IP, RS-232 O2I 102
60 x 42 x 53.5 140 x 100 infrared 7 Ethernet TCP/IP, EtherNet/IP, RS-232 O2I 103
60 x 42 x 59 400 x 300 red light 7 Ethernet TCP/IP, EtherNet/IP, RS-232 O2I 104
60 x 42 x 59 400 x 300 infrared 7 Ethernet TCP/IP, EtherNet/IP, RS-232 O2I 105
Cordsets
Type Description PartNo.
M12 Micro DC (8-pin) 2 m, PUR E 11231
M12 Micro DC (8-pin) 5 m, PUR E 11232
M12 Micro DC (8-pin) 10 m, PUR E 11806
M12 Micro DC (8-pin) 10 m, PUR E 11311
M12 Micro DC (8-pin) 2 m, PUR E 11950
M12 Micro DC (8-pin) 5 m, PUR E 11807
Spot light for optional lighting enhancement.M12 connector, transmitter
red light 630 mmO2D909
Accessories
Type Description PartNo.
Protective plastic cover E 21166
Plastic lens for diffusing light E 21165
Parameter setting cable, 2 m, M12 D-coded / RJ45, cross-link
E 11898
Parameter setting cable, 5 m, M12 D-coded / RJ45, cross-link
E 18422
Parameter setting cable, 10 m, M12 D-coded / RJ45, cross-link
E 18423
Mounting set, high-grade stainless steel, 100 mm rod
U 60042
Mounting set, high-grade stainless steel, 100 mm rod and rail mount cube
U 60043
86
efector Octavis systems monitor operating conditions of food andbeverage processing equipmentifm’s vibration monitors provide specific vibration monitoring oncomponents inside food processing equipment such as rolling elementbearings, rotational unbalances, and gear drive systems.
The system’s on-board microprocessor directly calculates the machine’svibration characteristics and compares them to the allowable limits. When the vibration levels exceed the allowable limits, the system automatically sets alarm outputs or transfers the data over an Ethernet network connection.
Innovative softwareifm’s Octavis software makes implementing acontinuous vibration monitoring solution easy.Programming is straightforward using the “wizard“guided configuration software. Analysis tools included in the programming software give users the ability to remotelyevaluate the machine’scondition. A bar graph displayprovides a quick overview of theentire machine’s operating con-ditions. The spectrum frequencyplots allow for comprehensiveanalysis, and the trend historychart plotter displays machinecondition changes over time.
Diagnostic systems
www.ifm.com
Vibration monitoring systems thatcontinuously evaluate the condition ofrotating equipment
Predictive maintenance solutions
VSE Multiplex accepts up to fouraccelerometers for vibration monitoring
Integrated memory stores vibration dataand provides historical trends
Ethernet capability simplifies data andalarm transfer
Increases food equipment uptime by con-tinuously monitoring machine condition
VSE
VSA
Configuration software
Detailed analysis
Trend history
Real-time monitoringVSA accelerometermounts remotely
VSE
87
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Diagnostic systems
www.ifm.com
Vibration diagnostic products
Type PartNo.
Switching Inputs/Outputs
DiagnosticMethod
Spectral Resolution
[Hz]
Variable
AccelerometerChannels
4 channels:1 configurable IEPE / MEMS
3 MEMS
4 channels:1 configurable IEPE / MEMS
3 MEMS
FrequencyRange [Hz]
0…10,000
0…10,000
FFT, envelope curve FFT,
trend analysis
VariableFFT, envelope
curve FFT, trend analysis
2 inputs2 outputs
VSE 002
VSE 1002 inputs
2 outputs8 configurable I/O
Multiplex control monitors
Type PartNo.
MountingThread
OperatingTemp [°C]
Housing
316 stainless steel
MeasuringRange
[g]
±25 (nominal ± 20)resolution 1.0 mg
FrequencyRange [Hz]
0…6,000 -30…125 M8 x 1.25 VSA 001
Protection
IP69K
Accelerometers
Type Description
Parameter software
PartNo.
VES 003
Ethernet cable cross - over
EC 2080
OPC server software, 25 I.P. address license(optional)
VOS 001
Required accessories Optional accessories
Type Description PartNo.
Magnetic mounting base for temporarymounting on flat or curved surfaces
F 90043
Glue-on base for VSA001 F 90042
Adhesive for F90042 F 90037
Conical mounting washer for VSA001(5 pack)
E 30115
Magnetic mounting base for temporarymounting on flat surfaces
UW 0004
CommunicationPort
Ethernet
Ethernet
Cordsets
Type Description PartNo.
M12 Micro DC (4-pin), 5 m, PVC EVT 001
M12 Micro DC (4-pin), 10 m, PVC EVT 002
M12 Micro DC (4-pin), 25 m, PVC EVT 003
M12 Micro DC (4-pin), 5 m, PVC EVT 004
M12 Micro DC (4-pin), 10 m, PVC EVT 005
M12 Micro DC (4-pin), 25 m, PVC EVT 006
88
Diagnostic sensors
Easy-to-use sensors make vibrationmonitoring simple
Vibration sensors and transmitters
Analog signal enables trending ofvibration levels
VKV sensors combine both switchingfunction and transmitter in one package
VTV transmitter is IP69K and made of 316Lstainless steel
Easy to use set-up guide makes implementing vibration monitoring straight forward
Compact vibration sensors detect changing conditions of food processingmachinery to indicate machine damageIn most food plants, every piece of equipment has its own vibration level that canchange when it experiences unusual operating conditions. These changes canindicate potential machine damage or failure.
The VK Series and VT Series vibration sensors are designed to permanently mounton a machine to continuously monitor the machine’s vibration level. By detecting vibration level changes when they first occur, these sensors can prevent food pro-cessing equipment from catastrophically failing, reduce secondary damage andeliminate expensive downtime.
The VK and VT sensors monitor vibration levels on:
• Motors• Pumps• Compressors• Fans • Centrifuges• Vibratory feeders
VK SeriesSensor
VT SeriesTransmitter
in/s mm/s
Small machines(<20hp)
Medium machines(<100hp)
Large machines withRigid foundation
Large machines withSoft foundation (isolated)
0.01 0.28
0.02 0.45
0.03 0.71
0.04 1.12
0.07 1.80
0.11 2.80
0.18 4.50
0.28 7.10
0.44 11.20
0.70 18.00
1.10 28.00
1.80 45.00
Unacceptable
Warning
Vibr
atio
nVe
loci
ty(R
MS) Satisfactory
Typical velocity damage levels
ifm’s vibration sensors andtransmitters monitor a varietyof machines in a plant. Thischart shows the typical velocitydamage level of a machine.Setting the maximum allow-able RMS velocity is based onmachine size and type. The VKand VT will provide conditionfeedback of machine vibrationlevels in your plant.
A drive motor system is monitored to protect process equipment fromexcessive vibration.
89
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Diagnostic sensors and transmitters
Vibration diagnostic products
Type PartNo.
MeasuringPrinciple
Frequency Range[Hz]
Measuring Range[mm/s]
0…25
Switching Output
1 switching output NC, PNP
Analog Output[mA]
4...20 10…1000Vibration velocity
RMSVKV 021
0…501 switching output NC, PNP 4...20 10…1000Vibration velocity
RMS
Supply Voltage
[V]
18…32 DC
18…32 DC VKV 022
0…25
MountingThreads
M8 x 1.25
M8 x 1.25
M8 x 1.25 /UNF 1/4-28
— 4...20 10…1000Vibration velocity
RMSVTV 1229.6…32 DC
Vibration switch and transmitter
Description PartNo.
Protective cover,transparent plastic
E 30094
Magnetic mounting base for temporarymounting on flat surfaces
UW 0004
Magnetic mounting base for temporarymounting on flat or curved surfaces
F 90043
Optional accessories
Type
Cordsets
VKV sensor
73 mm
Rotatable dialssetup vibrationmonitoring in5 minutes
Yellow statusLED
Green powerLED
VTV transmitter
68 mm
• Simple setup
• Can operate as a trendingtransmitter
• Easy-to-use setup guidemakes implementationsimple – no softwarerequired for configuration
• Vibration monitoring inaccordance with ISO 10816vibration standard
Glue-on base for VSA001 F 90042
Adhesive for F90042 F 90037
Type Description PartNo.
M12 Micro DC (4-pin), 5 m, PVC EVT 001
M12 Micro DC (4-pin), 10 m, PVC EVT 002
M12 Micro DC (4-pin), 25 m, PVC EVT 003
M12 Micro DC (4-pin), 5 m, PVC EVT 004
M12 Micro DC (4-pin), 10 m, PVC EVT 005
M12 Micro DC (4-pin), 25 m, PVC EVT 006
NEW
90
In-line flow meter monitors compressed airsystems and specialty gases (Ar, CO2, N2)
Monitors air and gas consumption to iden-tify leaks and improve energy efficiencies
Optimizes air and gas usage and improvessystem performance
Totalizer function monitors overallcompressed air and gas usage in a plant
Integrated pipe length ensures easymounting and installation
Condition monitoring
www.ifm.com/us
Compressed air and specialty gas meterefector Metris monitors compressed air and specialty gases such as argon (Ar),carbon dioxide (CO2), and nitrogen (N2) to detect leakage areas and improve energyefficiencies. Compressed gases are considered one of the most expensive sources of energy consumption in a plant. By identifying leakage areas, efector Metris can optimize compressed gas usage, improve system performance, and reduceenergy costs.
The compact sensor is fitted with an integrated pipe to ensure easy mounting andproper installation depth. The sensor’s 4-digit numeric display provides air and gasconsumption readings and features microprocessor-based pushbutton setup. Threedisplay options are available: cubic feet per minute, cubic feet per hour, and totalconsumed cubic feet. The 24 VDC unit provides switching, analog and pulse outputoptions.
Operating principleefector Metris incorporates two ceramic sensingelements that each contain a thermistor.
As one sensor element is heated, the second element isused as a reference. Power is then altered to the heaterto ensure a constant temperature difference (CTD)between the two elements.
efector metriscan be mountedin a supply pipeto monitor onemachine.
Or, mounted ina plant zone tomonitor severalmachines.
Flow meters
91
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Condition monitoring
DC • efector Metris flow meter • Switching, analog and pulse outputs
Type ProcessConnection
PressureRating[psi]
MediumTemperature
[°F]
PartNo.
efector Metris for compressed air · OUT1: PNP switching or pulse · OUT2: PNP switching or 4…20 mA scalable analog
2” NPT 232 32...140 SD 2001
1” NPT 232 32...140 SD 8001
www.ifm.com
efector Metris for specialty gases · OUT1: PNP switching or pulse · OUT2: PNP switching or 4…20 mA scalable analog
1/2” NPT 232 32...140 SD 6101
1/2” NPT 232 32...140
SupplyVoltage
[V]
19...30 DC
19...30 DC
19...30 DC
19...30 DC SD 6001
OperatingRange[scfm]
0...412
0...132
0...69.5 [Ar]
0...42.2 [CO2]
0...44
OperatingRange[scfh]
0...24,720
0...7945
0…4175 [Ar]
0…2530 [CO2]
0…2580 [N2]
0...2650
OperatingRange[scf]
0...4,294,967
0...4,294,967
0…4,000,000 [Ar]
0…4,000,000 [CO2]
0…4,000,000 [N2]
0...4,294,967
ResponseTime
< 0.1 sec
< 0.1 sec
< 0.1 sec
< 0.1 sec
0...43 [N2]
Type Description PartNo.
Totalizer (pulse output) display with dualswitching output
DX 2003
Analog signal display, with dual switchingoutput
DX 2012
Accessories Cordsets
Type Description PartNo.
M12 Micro DC (4-pin), 5 m, PVC EVT 001
M12 Micro DC (4-pin), 10 m, PVC EVT 002
M12 Micro DC (4-pin), 25 m, PVC EVT 003
M12 Micro DC (4-pin), 5 m, PVC EVT 004
M12 Micro DC (4-pin), 10 m, PVC EVT 005
M12 Micro DC (4-pin), 25 m, PVC EVT 006
92
316 stainless steel coupling nut providesexcellent corrosion resistance
Smooth, hex-shaped coupling nut cleanseasily in extreme washdowns
Cordset features EPDM O-ring, offersflexibility in wide temperature range
PVC cable jacket resists flame, heat,oxidation and moisture
Approval
Cordsets and Patchcords
www.ifm.com
M12 Micro DC cordsetsand patchcords
Lock-in-PlaceProtects O-ring
ifm has developed a complete line of M12 cordsets that provide reliable perform-ance in aggressive washdown environments. The cordsets are designed with a 316stainless steel coupling nut that offers excellent corrosion resistance and providesthe longest protection against freezing and rusting. The smooth, hexed-shapedcoupling nut cleans easily in extreme washdown conditions and withstands harshabrasives.
ecolink M12 cordsets and patchcords for demanding applications
Designed and tested for foodand beverage applications
ifm ecolink cordsets are subjected toa variety of test that ensure reliableperformance in the application. Testsinclude IP69K, pressure cleaning,thermal shock, and shock and vibration.
Cordsets for washdown environments are manu-factured with high-grade stainless steel couplingnuts, gold-plated contacts and an O-ring that iscompressed to permanently maintain its sealingfunction. These cordsets operates in a broad rangeof temperatures ranging from -20 to 105°C.
The cordset’s O-ring is manufactured withEPDM, a chemically cross-linked elastomer thatoffers excellent flexibility in fluctuating tempera-tures. EPDM provides ideal insulation resistanceand strength and offers protection in causticcleaning environments.
3
1 2
4
5
3
1 2
4
5
3
1 2
4
5
93
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
M12 Micro DC Cordsets and Patchcords
Type Face View
Max Supply
Protection ConnectorMaterials
CableLength
PartNo.
Pin 1: brownPin 2: whitePin 3: bluePin 4: blackPin 5: not used
250 VAC / 300 VDCIP67 / IP68 / IP69k
-25…100 °CcURus
PVCEPDM O-ring
316 SS coupling nut
PVCEPDM O-ring
316 SS coupling nut
5 M EVT 001
10 M EVT 002
25 M EVT 003
10…36 VDCIP67 / IP68 / IP69k
-25…100 °CcURus
5 M EVT 007
10 M EVT 008
25 M EVT 009
5 M EVT 004
10 M EVT 005
25 M EVT 006
Cordsets and Patchcords
4-pin Micro DC cordsets · PVC jacket
4-pin Micro DC cordsets with 3 PNP LED · PVC jacket
3
1 2
4
5
Female
Pin 1: brownPin 2: whitePin 3: bluePin 4: blackPin 5: not used
250 VAC / 300 VDCIP67 / IP68 / IP69k
-25…100 °CcURus
PVCEPDM O-ring
316 SS coupling nut
Female
Pin 1: brownPin 2: whitePin 3: bluePin 4: blackPin 5: not used3
1 2
4
5
Female
Pin 1: brownPin 2: whitePin 3: bluePin 4: blackPin 5: gray
Pin 1: brownPin 2: whitePin 3: bluePin 4: blackPin 5: gray
250 VAC / 300 VDCIP67 / IP68 / IP69k
-25…100 °CcURus
PVCEPDM O-ring
316 SS coupling nut
250 VAC / 300 VDCIP67 / IP68 / IP69k
-25…100 °CcURus
PVCEPDM O-ring
316 SS coupling nut
5 M EVT 010
10 M EVT 011
25 M EVT 012
5 M EVT 013
10 M EVT 014
25 M EVT 015
5-pin Micro DC cordsets · PVC jacket
Female
Female
30 VAC / 36 VDCIP68
-25…80 °C
PURViton
Nickel platedbrass nut
2 M E 11950
5 M E 11807
10 M E 11311
2 M E 11231
5 M E 11232
10 M E 11806
8-pin Micro DC cordsets · PUR jacket · Recommended for vision sensors
4
1 2
65
378
30 VAC / 36 VDCIP67
-40…80 °C
PURViton
Nickel platedbrass nut
5 M E 12166
10 M E 12167
5 M E 12168
10 M E 12169
8-pin Micro DC cordsets · PUR jacket · Recommended for light curtains
4
1 2
65
378
250 VAC / 300 VDCIP67 / IP68 / IP69k
-25…100 °CcURus
PVCEPDM O-ring
316 SS coupling nut
0.3 M EVT 040
0.6 M EVT 041
1 M EVT 042
2 M EVT 043
5 M EVT 044
4-pin Micro DC patchcords · PVC jacket
3
1 2
4
5
Female
43
2 1
Male
30 VAC / 36 VDCIP67 / IP68 / IP69k
-25…100 °CcURus
PVCEPDM O-ring
316 SS coupling nut
0.3 M EVT 058
0.6 M EVT 059
1 M EVT 060
2 M EVT 061
5 M EVT 062
5-pin Micro DC patchcords · PVC jacket
3
1 2
4
5
Female
4
2 1
35
Male
www.ifm.com
Pin 1: whitePin 2: brownPin 3: greenPin 4: yellow
Pin 5: grayPin 6: pinkPin 7: bluePin 8: red
30 VAC / 36 VDCIP67
-40…80 °C
PURViton
Nickel platedbrass nut
4
1 2
65
378
Pin 1: whitePin 2: brownPin 3: greenPin 4: yellow
Pin 5: grayPin 6: pinkPin 7: bluePin 8: red
Pin 1: brownPin 2: whitePin 3: bluePin 4: black
Pin 5: grayPin 6: pinkPin 7: lilacPin 8: orange
30 VAC / 36 VDCIP68
-25…80 °C
PURViton
Nickel platedbrass nut
4
1 2
65
378
Pin 1: brownPin 2: whitePin 3: bluePin 4: black
Pin 5: grayPin 6: pinkPin 7: lilacPin 8: orange
Why choose PVC cable material?PVC is a polyvinylchloride material that offers excellentmechanical strength and resistance to chemicals. PVC alsooffers outstanding performance in a broad range of temperature conditions and resists flame, heat, oxidation,moisture and abrasion.
Advantages of EPDM O-rings
EPDM is a chemically cross-linked elastomer with excellentflexibility at high and low temperatures. This material provides exceptional insulation and strength as well asresistance to abrasion. EPDM is particularly suited for thecaustic-cleaning environment found in the food and beverage industry.
316 stainless steel coupling nuts are highly compatible with the food and beverage industry 316 stainless steel offers excellent corrosion resistance which is necessary in the food and beverage industry. Stainless steel offers the longest protection against freezing and rusting. The smooth externalhexed-shaped coupling nut aids in the cleaning process and withstands harsh abrasion.
94
Industry standard color coding for foodand beverage applications
Vibration resistant coupling nut withstandsshock and vibration environments
EPDM O-ring offers excellent flexibility athigh and low temperatures
Low-resistance contact design withgold plated contacts
Available with PVC cable and 316stainless steel coupling nut
Cordsets
www.ifm.com
Micro AC and Mini AC Cordsets
BROA
D
Operating
BROA
D
Operating ®®
Rugged Micro AC and Mini AC cordsets are designed for food andbeverage applications
32
5 1
4
3
1
2
95
Company
Positionsensors
Vision sensors
Safetytechnology
Processsensors
Industrialnetworks
Identificationsystems
Machineconditionmonitoring
Wiring technology
Micro AC Cordsets
Type Face View
Max Supply
Protection ConnectorMaterials
CableLength
PartNo.
Mini AC Cordsets
Type Face View
Max Supply
Protection ConnectorMaterials
CableLength
PartNo.
Pin 1: greenPin 2: red/blackPin 3: red/white
300 VAC / VDCIP68
-10…100°CcULus
PVCEPDM
316 stainless steel
5 M E 18206
10 M E 18207
25 M E 18208
5 M E 18209
10 M E 18210
25 M E 18211
Cordsets
3-pin · 1/2” Micro AC cordsets · PVC jacket
Female
3
1
2 Pin 1: greenPin 2: red/blackPin 3: red/white
300 VAC / VDCIP68
-10…100°CcULus
PVCEPDM
316 stainless steel
Female
Pin 1: whitePin 2: redPin 3: greenPin 4: orangePin 5: black
300 VAC/VDCIP68
-20…105°CcURus
PVCEPDM
316 stainless steel
2 M E 18042
4 M E 18043
6 M E 18044
5-pin · 7/8” Mini AC cordsets · PVC jacket
2
5 1
43
Female
Pin 1: red/whitePin 2: redPin 3: greenPin 4: red/yellowPin 5: red/black
250 VAC / VDC IP68PVC
EPDM 316 stainless steel
5 M E 18238
10 M E 18239
5 M E 18240
10 M E 18241
5-pin · 1/2” Micro AC cordsets · PVC jacket
www.ifm.com
Female
32
5 1
4
Pin 1: red/whitePin 2: redPin 3: greenPin 4: red/yellowPin 5: red/black
250 VAC / VDC IP68PVC
EPDM 316 stainless steel
Female
96
Business policies
Position sensors – Five year limited warranty
ifm efector warrants that its position control sensors, i.e. proximity switches and photoelectric sensors, will be free from defects in materials and workmanship for five years, and ifm efector will repair or replace anyproximity switch which is found to be defective within five years of shipment and which is returned to us, shipping prepaid, within one year after the defect is discovered.
This warranty is in lieu of and excluding any implied warranty of merchantability or fitness for a particularpurpose and this remedy is the exclusive remedy, as ifm efector will not be responsible for any incidental orconsequential damages.
We stand behind our productsAll ifm products are backed with the longest established warranty program in the sensor industry. ifm position sensors and fluid sensors carry a 5-year and 2-year warranty, respectively. For your convenience, a downloadable shipping form is available on our website: www.ifm.com.
Concerning safety…ifm efector makes every effort to build a dependable product, but every product will eventually fail. Therefore,your equipment must be designed to prevent property damage and personal injury if our products fail.
ifm efector products are not designed to be used as stand-alone devices to protect or guard human life or limb.
Prices F.O.B. Exton, PA. Prices and specifications subject to change without notice.
Fluid and diagnostic sensors – Two year limited warranty
ifm efector warrants that its fluid control sensors will be free from defects in materials and workmanship fortwo years, and ifm efector will repair or replace any sensor which is found to be defective within two years ofshipment and which is returned to us, shipping prepaid, within one year after the defect is discovered.
This warranty is in lieu of and excluding any implied warranty of merchantability or fitness for a particular purpose and this remedy is the exclusive remedy, as ifm efector will not be responsible for any incidental orconsequential damages.