seminario prof Herve brochure - unibs.itTitle: Microsoft PowerPoint -...

2
University Brescia Seminars 2013 prof. Eveline Hervé-Luanco Centre des Matériaux University of Versailles Saint Quentin en Yvelines Aula Riunioni, DICATAM Via Branze 43 25123 Brescia PhD SCHOOL OF ENGINEERING MATERIALS FOR ENGINEERING May 28 th 15:00 -16:00, Introductory lecture: Homogenization techniques and effective behavior of multicoated fiber- or particle-reinforced composites An introduction to homogeneization techniques is first presented and used to compare the "point approach" to the "pattern approach". The pattern approach is used to obtain Hashin-Shtrikman-type bounds for the Composite Sphere Assemblage. An extension of the Generalized Self-Consistent Scheme is then provided in the case of multicoated fibre- or particle-reinforced composites. This extension uses the solution of the relevant elastic field and a transfer matrix approach. The effect of an interphase between the fibers and the matrix (softer or stiffer than the matrix, or linearly variable) on the behavior of the fiber-reinforced composite is illustrated by numerical calculations in the case of a longitudinal shear loading. Some applications are presented in the case of thermal and diffusion behavior. Some coupling effects are then taken into account thanks to these Generalized Self- Consistent Schemes in the case of Thermoelasticity and Viscoelasticity.

Transcript of seminario prof Herve brochure - unibs.itTitle: Microsoft PowerPoint -...

Page 1: seminario prof Herve brochure - unibs.itTitle: Microsoft PowerPoint - seminario_prof_Herve_brochure.ppt Author: bardella Created Date: 4/26/2013 2:34:45 PM

University Brescia

Seminars 2013

prof. Eveline Hervé-Luanco

Centre des Matériaux

University of Versailles Saint Quentin en Yvelines

Aula Riunioni, DICATAMVia Branze 4325123 Brescia

PhD

SCHO

OL

OF

ENG

INEE

RIN

G

MA

TERI

ALS

FO

R EN

GIN

EERI

NG

May 28th 15:00 -16:00, Introductory lecture:

Homogenization techniques and effective behavior of multicoated fiber-

or particle-reinforced composites

An introduction to homogeneization techniques isfirst presented and used to compare the "point approach" to the "pattern approach". The patternapproach is used to obtain Hashin-Shtrikman-type bounds for the Composite Sphere Assemblage. An extension of theGeneralized Self-Consistent Scheme is then provided in the case of multicoated fibre- or particle-reinforced composites. This extension uses the solution of the relevant elastic field and a transfer matrix approach. The effect of an interphase between the fibers and the matrix (softer orstiffer than the matrix, or linearly variable) on the behavior of the fiber-reinforced composite is illustrated by numerical calculations in the case of a longitudinal shear loading. Some applications are presented in the case of thermaland diffusion behavior. Some coupling effects are then taken into account thanks to these Generalized Self-Consistent Schemes in the case of Thermoelasticity andViscoelasticity.

Page 2: seminario prof Herve brochure - unibs.itTitle: Microsoft PowerPoint - seminario_prof_Herve_brochure.ppt Author: bardella Created Date: 4/26/2013 2:34:45 PM

University Brescia

Seminars 2013

prof. Eveline Hervé-Luanco

Centre des Matériaux

University of Versailles Saint Quentin en Yvelines

Aula Riunioni, DICATAMVia Branze 4325123 Brescia

PhD

SCHO

OL

OF

ENG

INEE

RIN

G

MA

TERI

ALS

FO

R EN

GIN

EERI

NG

May 28th 16:00 -17:00, Technical seminar:

Generalized Self-Consistent Schemes and imperfect interfaces: Application

to size effects in nanocomposites

A new procedure dealing with n-layered inclusion based composites with imperfect interfaces respecting spherical symmetry is presented. For that purpose, the elastic stress and strain fields of an n-layered isotropic spherical inclusion embedded in an unbounded matrix subject to uniformboundary conditions are first derived accounting for thebehavior of imperfect interfaces, described by"discontinuity matrices". The classical Self-Consistent energy condition, still valid in this particular context, is then used to obtain the effective behavior of such composites. Thisprocedure exploits the "morphological representativepattern"-based theory to improve the micromechanical models. Some results are presented to discuss the modeling capability of this approach. Also, it is shown that these improved micromechanical models can account for particle size effects in nanocomposites.

La visita della prof.ssa E. Hervé-Luanco è finanziata su fondo di Ateneo per attività a carattere internazionale