RECIPROCATING COMPRESSORSEMI-HERMETIC

MULTIPLE COMPRESSORS UNIT WITH LEADING INVERTER COMPRESSOR

ORIGINAL MANUFACTURED EQUIPMENT

Watch BITZER video

// 2

iPac racks nomenclature is reported here below, with clear similarities to MultiPac designation:

Identification for iPac unit

Index for the frame configuration

Code for the number of compressor installed on the rack

Identifier for application (K for medium and Low temperature, H for High temperature)

Code to identify the VARISPEED compressor model

Identification of the standard compressor model

In a world where energy efficiency and sustainability are key factors for the user of any kind of refrigeration projects, adjustability becomes an additional driving force for the design of the iPac range of units.

The high adjustability is required especially to follow adequately the variation of the refrigeration load along the whole running time of the system. The integration of the inverter technology through the use of the VARISPEED compressor by BITZER, allows the required modulation and adaptation that any designer is looking for. This gives the potential to lift the evaporating temperature and stabilizes fluctuation in condensing pressure to reduce the energy consumption.

PRODUCTS SPECIFICATIONS

FEATURES

The iPac, in the 2, 3 and 4 compressors configurations, will offer a compact and plug & play solution to be fit into any refrigeration applications where otherwise a multiple condensing unit installation will be required.

The iPac range is a further identification of the basic phylosophy of the Added Value Products by BITZER. It incorporates all the high quality features of the well known and qualified MultiPacs semi-hermetic reciprocating compressor racks and at the same time it includes additional features characteristics of this new technology.

VARISPEED compressor by BITZER with suction gas cooled inverter, to provide maximum flexibility and efficiency also at part load.conditions

Standard electrical board with customized controller that will simplify the installation of the unit.

Extremely easy access to compressors and all replaceable parts fitted on the unit.

Flexible eliminator and electronic oil level control on each compressor for maximum reliability.

iP - 103 - K - 4EEF - 4DES

iP - 103 - K - 4EEF - 4DES

iP - 103 - K - 4EEF - 4DES

iP - 103 - K - 4EEF - 4DES

iP - 103 - K - 4EEF - 4DES

iP - 103 - K - 4EEF - 4DES

// 3

MEDIUM AND LOW TEMPERATURE PERFORMANCE TABLEThe medium and low temperature series of iPac units are available for operation on R404A*. With the introduction of Ecoline compressor the series of iPac K can cover both medium and low temperature application and the table here below reports capacity and heat rejection for different conditions. Specific conditions of a project can be calculated with the use of the BITZER selection software

Suction gas Temperature: +20°C (according to EN12900)VARISPEED frequency: 80Hz

The low temperature range of iPac will be available only for operation on R404A. The cooling capacities of each unit are reported in the performance tables here below:

iP-102-K-4EEF-4DES iP-102-K-4DEF-4CES

iP-102-K-4CEF-4TES

iP-103-K-4FEF-4EES

iP-103-K-4EEF-4DES

iP-103-K-4DEF-4CES

iP-103-K-4CEF-4TES

iP-104-K-2DEF-2CES

iP-104-K-4FEF-4EES

iP-104-K-4EEF-4DES

iP-104-K-4DEF-4CES

iP-104-K-4CEF-4TES

304050304050304050304050304050304050304050304050304050304050304050304050

41.234.928.449.642.134.561.652.042.548.641.233.559.050.140.971.360.549.689.375.361.346.839.732.163.653.943.976.965.353.392.978.864.7117.098.680.2

-10 -20 -30 -10 -20 -30 26.822.618.232.527.322.140.133.426.831.626.721.638.532.526.246.639.231.758.148.338.630.926.020.741.435.028.350.242.334.260.851.041.376.163.250.4

16.513.710.920.116.613.224.620.115.719.516.413.023.819.815.728.823.818.935.528.922.419.115.812.225.621.417.031.025.820.537.531.024.646.537.729.1

54.149.644.465.159.753.780.773.766.069.864.057.383.476.568.8

101.092.483.285.377.568.861.055.949.782.976.068.1

100.291.982.5

121.0110.799.5

151.9138.2123.3

37.934.730.945.841.837.456.451.045.248.944.840.058.653.748.170.864.457.659.353.446.843.139.334.758.153.447.870.364.457.684.977.369.2

105.795.283.9

25.323.020.230.727.724.537.333.228.832.729.726.239.435.831.747.242.437.439.134.629.628.926.122.539.035.631.547.142.737.856.751.145.269.661.753.1

Model Cond.Temp.

˚CEvaporating temperature ˚C

Cooling capacity [kW] Heat Rejection [kW]

// 4

DIMENSION DRAWINGS

iP-102-K-4EEF-4DES

iP-102-K-4DEF-4CES

iP-102-K-4CEF-4TES

iP-103-K-4FEF-4EES

iP-103-K-4EEF-4DES

iP-103-K-4DEF-4CES

iP-103-K-4CEF-4TES

iP-104-K-2DEF-2CES

iP-104-K-4FEF-4EES

iP-104-K-4EEF-4DES

iP-104-K-4DEF-4CES

iP-104-K-4CEF-4TES

Model

F552T

F552T

F732N

F552T

F732N

F732N

F1052T

F552T

F732N

F732N

F1052T

F1202N

Pump down volume (kg)

51.9

51.9

70.2

51.9

70.2

70.2

100.9

51.9

70.2

70.2

100.9

107.7

Inlet

2 1/8”

Outlet

7/8”

1 1/8”

Connections Liquid receiverDimensionsModelC [mm]

1350

1700

B [mm]

850

A [mm]

1230

1450

1960

D [mm]

1530

1750

2260

A B

C

D

// 5

SCHEMATIC DIAGRAM

HIg

h Pr

essu

re G

auge

Low

Pre

ssur

e G

auge

Lo

w P

ress

ure

Switc

h Au

toH

P Pr

essu

re S

witc

h M

anua

lSo

leno

id V

alve

Ball

Valv

e / V

alve

Sigh

t Gla

ss

Filte

rTX

VVi

brat

ion

Elim

inat

orC

heck

Val

veO

il Fl

ow S

witc

hO

il C

ontro

l Val

ve

NOTES

NOTES

PT. Bitzer Compressor IndonesiaJl. Raya Tlajung Udik No.2 Gunung Putri

Bogor 16962, IndonesiaTel +62 (0) 21 8671041 // Fax +62 (0) 21 8670386

www.bitzeravp.com • infoavp@bitzerasia.com

Subject to change // 03.2013