Self-Propelled Articulating Booms · Self-Propelled Articulating Booms Specifications Model...
2
www.genielift.co.uk www.genielift.me Self-Propelled Articulating Booms Specifications Model Z-60/37DC & Z-60/37FE * The metric equivalent of working height adds 2 m to platform height. U.S. adds 6 ft to platform height. ** In lift mode (platform raised), the machine is designed to operate on firm, level surfaces only. *** Gradeability applies to driving on slopes. See operators manual for details regarding slope ratings. **** Weight will vary depending on options and/or country standards. Range Of Motion Z-60/37DC & Z-60/37FE Z ® -60/37DC & Z ® -60/37FE A B D E A B C D E F G 01/18 Part No. B109364UK C G F -3.05 m 0 ft 3.05 m 6.1 m 9.14 m 12.19 m -10 ft 0 m 10 ft 20 ft 30 ft 40 ft 21.34 m 70 ft 18.29 m 60 ft 15.24 m 50 ft 12.19 m 40 ft 9.14 m 30 ft 6.1 m 20 ft 3.05 m 10 ft -3.05 m -10 ft 0 ft 0 m Measurements Metric US Working height maximum* 20.16 m 65 ft 7 in Platform height maximum 18.16 m 59 ft 7 in Horizontal reach maximum 11.15 m 36 ft 7 in Up and over clearance maximum 7.39 m 24 ft 3 in Platform length - 8 ft / 6 ft model 0.91 m /0.76 m 3 ft / 2 ft 6 in Platform width - 8 ft / 6 ft model 2.44 m /1.83 m 8 ft / 6 ft Height - stowed 2.54 m 8 ft 4 in Height - transport (jib tucked under) 2.62 m 8 ft 7 in Length - stowed 8.15 m 26 ft 9 in Length - transport (jib tucked under) 6.30 m 20 ft 8 in Width 2.49 m 8 ft 2 in Wheelbase 2.49 m 8 ft 2 in Ground clearance - center 0.33 m 1 ft 1 in Productivity Lift capacity 227 kg 500 lbs Platform rotation 160° 160° Vertical jib rotation 135° 135° Turntable rotation 355° non-continuous Turntable tailswing - riser up 0.58 m 1 ft 11 in Turntable tailswing - riser down 0.81 m 2 ft 8 in Drive speed - stowed 6.44 km/h 4.0 mph Drive speed - raised** 1.09 km/h 0.68 mph Gradeability - 4WD - stowed*** 45% 45% Turning radius - inside 2.51 m 8 ft 3 in Turning radius - outside 5.69 m 18 ft 8 in Controls 24V DC proportional Tyres 355/55D 625 Power Drive system 34 V 3-Phase AC Power source 48 V DC (eight 6V batteries) 390 Ah capacity (FLA standard on DC) 415 Ah capacity (AGM standard on FE) 24.8 hp (18.5kW) Kubota D1105 T4f driven AC generator (FE only) Auxiliary power unit 12V DC 12V DC Hydraulic tank capacity 68.14 L 18 gal Fuel tank capacity 64.35 L 17 gal Sound & Vibration Levels Sound pressure level (ground workstation) 70 dBA (DC) / 77 dBA (FE) Sound pressure level (platform workstation) 70 dBA (DC) / 72 dBA (FE) Vibration 0.553 m/s² (1.81 ft/s²) Weight**** Z-60/37DC 7,530 kg 16,600 lbs Z-60/37FE 7,756 kg 17,100 lbs Standards Compliance EU Directives: 2006/42/EC - Machinery (harmonized standard EN280); 2004/108/EC (EMC); 2000/14/EC (Outdoor Noise)
Transcript of Self-Propelled Articulating Booms · Self-Propelled Articulating Booms Specifications Model...
www.genielift.co.uk www.genielift.me
Self-Propelled Articulating Booms
Specifications Model Z-60/37DC & Z-60/37FE
* The metric equivalent of working height adds 2 m to platform height. U.S. adds 6 ft to platform height.
** In lift mode (platform raised), the machine is designed to operate on firm, level surfaces only.
*** Gradeability applies to driving on slopes. See operators manual for details regarding slope ratings.
**** Weight will vary depending on options and/or country standards.
Range Of Motion Z-60/37DC & Z-60/37FE
Z®-60/37DC & Z®-60/37FE
A
B
D
E
A
B
C
D
E
F
G
01/18 Part No. B109364UK
C
G
F
-3.05 m 0 ft 3.05 m 6.1 m 9.14 m 12.19 m-10 ft 0 m 10 ft 20 ft 30 ft 40 ft
21.34 m70 ft
18.29 m60 ft
15.24 m50 ft
12.19 m40 ft
9.14 m30 ft
6.1 m20 ft
3.05 m10 ft
-3.05 m-10 ft
0 ft0 m
Measurements Metric US
Working height maximum* 20.16 m 65 ft 7 inPlatform height maximum 18.16 m 59 ft 7 inHorizontal reach maximum 11.15 m 36 ft 7 inUp and over clearance maximum 7.39 m 24 ft 3 in Platform length - 8 ft / 6 ft model 0.91 m /0.76 m 3 ft / 2 ft 6 in Platform width - 8 ft / 6 ft model 2.44 m /1.83 m 8 ft / 6 ft Height - stowed 2.54 m 8 ft 4 in Height - transport (jib tucked under) 2.62 m 8 ft 7 in Length - stowed 8.15 m 26 ft 9 in Length - transport (jib tucked under) 6.30 m 20 ft 8 in Width 2.49 m 8 ft 2 in Wheelbase 2.49 m 8 ft 2 in Ground clearance - center 0.33 m 1 ft 1 in
Productivity
Lift capacity 227 kg 500 lbsPlatform rotation 160° 160°Vertical jib rotation 135° 135°Turntable rotation 355° non-continuousTurntable tailswing - riser up 0.58 m 1 ft 11 inTurntable tailswing - riser down 0.81 m 2 ft 8 inDrive speed - stowed 6.44 km/h 4.0 mphDrive speed - raised** 1.09 km/h 0.68 mphGradeability - 4WD - stowed*** 45% 45%Turning radius - inside 2.51 m 8 ft 3 inTurning radius - outside 5.69 m 18 ft 8 inControls 24V DC proportionalTyres 355/55D 625
Power
Drive system 34 V 3-Phase ACPower source 48 V DC (eight 6V batteries) 390 Ah capacity (FLA standard on DC) 415 Ah capacity (AGM standard on FE) 24.8 hp (18.5kW) Kubota D1105 T4f driven AC generator (FE only)Auxiliary power unit 12V DC 12V DCHydraulic tank capacity 68.14 L 18 galFuel tank capacity 64.35 L 17 gal
Sound & Vibration LevelsSound pressure level (ground workstation) 70 dBA (DC) / 77 dBA (FE)Sound pressure level (platform workstation) 70 dBA (DC) / 72 dBA (FE)Vibration 0.553 m/s² (1.81 ft/s²)
Weight****
Z-60/37DC 7,530 kg 16,600 lbs Z-60/37FE 7,756 kg 17,100 lbs
Standards Compliance EU Directives: 2006/42/EC - Machinery (harmonized standard EN280); 2004/108/EC (EMC); 2000/14/EC (Outdoor Noise)
Features
Self-Propelled Articulating Booms
(1) Factory-fit option only(2) Includes a first 2 years subscription(3) Aftermarket only(4) Reduces load capacity of about 27 kg (60 lb). Only available with 1.83 m (6 ft) platform, not available with any other platforms nor options on the platform
Z®-60/37DC & Z®-60/37FE
Platform Options• Steel 1.83 m (6 ft) dual entry with side
swing gate (standard)• Steel 2.44 m (8 ft) tri entry with side
swing gate
Jib• 1.52 m (5 ft) jib boom with 135˚
working range
Engine (FE only)• 18.5 kW (24.8 hp) Kubota T4 diesel
Drive• 4WD Electric AC (standard)
Axle• Active oscillation (standard)
Tyre Options• Rough terrain non-marking foam filled
(standard)• Rough terrain foam-filled
Productivity Options • Half mesh platform inserts• Platform auxiliary top rail• Air line to platform• Power to platform: plug, socket,
with optional Residual-current Circuit Breaker with Overcurrent protection
• Work lights package (2 on chassis, 2 on platform) (1)
• Dual axis joystick steering (1)
• Biodegradable hydraulic oil• Aircraft protection package: platform
foam padding and padded disable system (1,4)
• Hostile environment kit: cylinder bellows, boom wiper seals platform and ground control box covers (1)
• Track & Trace (2) (GPS unit providing machine location & operating information)
• Chassis tilt lift function cut-out (software setting)
• Panel cradle package (1)
• Lockable platform control box covers• Tow package (1)
• Operator Protective Structure(3)
• Tool tray (3)
• Fall Arrest Bar (3)
Power Options• 2000W 120V/60Hz, 240V/50Hz or
110V/50Hz power inverter • FLA (flooded lead acid) batteries
(standard on DC)• AGM maintenance-free batteries
(standard on FE)• Low temperature cut-out module
Options & Accessories
Measurements• 20.16 m (65 ft 7 in) working height• 11.15 m (36 ft 7 in) horizontal reach• 7.40 m (24 ft 3 in) up and over clearance• Up to 227 kg (500 lbs) lift capacity
Productivity• Digital hour meter with battery charge
indicator and diagnostic readout• 4 Wheel AC electric drive system• Variable speed high efficiency hydraulic
power unit• Self-leveling platform• Hydraulic platform rotation• Proportional joystick controls• Telematics Ready Connector • Thumb rocker steering• Drive enable• Chassis tilt drive function cut-out• AC power cord to platform• Horn• Hour meter• Tilt alarm• Descent & travel alarms• Flashing beacon• 355° non-continuous turntable rotation• Locking turntable covers• Positive traction drive• Dual parallelogram for vertical wall
tracking• Lift Guard™ Contact Alarm
Power• 48 V DC battery pack (390Ah FLA
standard on DC)• 48 V DC battery pack (415Ah AGM
standard on FE)• 12V DC auxiliary power• 25A temperature compensated smart
charge system• Battery charge indicator• Low battery voltage interrupt
Easily Configured To Meet Your Needs Standard Features
sretuaeFturesea Standard F
orP-flSe-60/37DC ®Z
Easily
citr Adelleop-60/37FE®C & Z
our NeedsYYour Needso Meet TTo Meet Configured
oo Bgnitulaac
Accessories Options &
som
i bl d hi VV4 Wheel AC electri •indicator and diagn Digital hour meter •
oductivityPr
Up to 227 kg (500 •7.40 m (24 ft 3 in) •11.15 m (36 ft 7 in •20.16 m (65 ft 7 in •
ementsMeasur
Engin
work 1.52 •
Jib
swin Stee •swin Stee •
Platfo
fi i h d li h f ic drive system
eadout nostic r with battery charge
0 lbs) lift capacity up and over clearance
each n) horizontal r n) working height
e (FE only)
king range2 m (5 ft) jib boom with 135˚
ng gateel 2.44 m (8 ft) tri entry with side
d)ng gate (standarel 1.83 m (6 ft) dual entry with side
orm Options
Biodegradable hydraulic oil•Dual axis joystick steering •
(1)on platform) ork lights package W•
cureaker with OverBrwith optional Residual-currPower to platform: plug, socket, •Air line to platform•Platform auxiliary top rail•Half mesh platform inserts•
oductivity OptionsPr
e
de
ulic oil(1) ering
(2 on chassis, 2 otectionent prr
cuit ent Cir al-curr ug, socket,
rail nserts
nHor•d to AC power cor•
Chassis tilt drive fu •Drive enable•
ocker steeThumb r•elematics Ready C TTelematics Ready Connector •oportional joystic Pr•
Hydraulic platform •Self-leveling platfor•power unitariable speed hig VVariable speed high ef•
(stanRou •
e OyrTTyr
Activ •
Axle
4WD •
Drive
18.5 •
platform unction cut-out
ering Connector
ols ck controtation r
rm
ficiency hydraulic h ef
d)ndargh terrain non-marking foam filled
Options
d)ve oscillation (standar
d)D Electric AC (standar
5 kW (24.8 hp) Kubota T4 diesel
Panel cradle package •e setting)(softwar
Chassis tilt lift function cut-out •information)machine location & operating
(GPS (2)race rack & T Trace TTrack & T•ol b ound contrand gr
bellows, boom wiper seals platform onment k Hostile envir•
(1,4)system foam padding and padded disable
otection paccraft prAir•
ed
(1) e
n cut-out
perating oviding S unit pr
(1) ox covers seals platform
kit: cylinder
added disable : platform ckage
Pd™ Conta Lift Guar•
trackingDual parallelogram •Positive traction dr•
ntable cLocking tur•355° non-continuo •Flashing beacon•Descent & travel a•
ilt alarmT•Hour meter•
Rou •
act Alarm
m for vertical wall rive
coversotationntable r ous tur
larms
gh terrain foam-filled
d on DC)(standarFLA (flooded lead acid) batteries 110V/50Hz power inv 2000W 120V/60Hz, 2
Power Options
(3)est Bar Fall Arr•
(3)ool tray TTool tray •otective Structur• Operator Pr
(1)ow package TTow package •Lockable platform contr•
d) batteries verter
240V/50Hz or
(3)e Structur
ol box covers ntr
Low battery voltag •Battery charge ind•charge system
e c 25A temperatur•12V DC auxiliary p•
d on FE)standar48 V DC battery pa •
d on DC)standar48 V DC battery pa •
Power
ge interrupt icator
compensated smart power
ack (415Ah AGM
ack (390Ah FLA
e cut- Low temperaturd on FE)(standar
e AGM maintenance-fr
-out module
ee batteries
any other platforms nor options on the platformavailable with 1.83 m (6 ft) platform, not available with
Reduces load capacity of about 27 kg (60 lb). Only (4) Aftermarket only(3) Includes a first 2 years subscription(2) Factory-fit option only(1)
s on the platform tform, not available with
bout 27 kg (60 lb). Only
cription
United KingdomThe Maltings, Wharf Road, Grantham NG31 6BH, T: +44 800 988 3739 (toll free), Fax +44 (0)1476 584334, Email [email protected]
www.genielift.co.uk www.genielift.me
Visit www.genielift.co.uk/locations to view our global locations list.
Worldwide Manufacturing And DistributionAustralia · Brazil · Caribbean · Central America · China · France · Germany · Italy · Japan · Korea · Mexico · Russia · Southeast Asia · Spain · Sweden · United Arab Emirates · United Kingdom · United States
Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade names of Terex Corporation and/or their subsidiaries in the USA and many other countries. Genie is a registered trademark of Terex South Dakota, Inc. © 2018 Terex Corporation.
