Select-Info Packet Power, Environmental Sensor With Mesh Wi-Fi Data Transmission
1
Click here to load reader
-
Upload
kamel-abou-faraj -
Category
Technology
-
view
97 -
download
0
description
Environmental Sensor With Mesh Wi-Fi Data Transmission Collects temperature and humidity readings and sends alerts by e-mail and SMS Detects other smart sensors and automatically form a wireless network Add or remove a smart sensor and the system automatically adapts Sends e-mail and SMS in case a user defined threshold is violated Each unit can gather temperature readings from up to 10 temperature probes Self-configuring wireless mesh network of monitoring devices Centralized analyzing and management through local software application or via Packet Power’s cloud based service Probe temperature reading range -40 to 85° C High precision measurement (±1° C, ±2% RH) Map temperature readings to facility layout diagram Access real time information, create historical reports and export to CSV file Create and publish dashboards and QR labels Optional Smart Power Cables record detailed power usage in real time (A, V, W, VA, kWh and frequency) Requires just one Ethernet port and IP address Specifications: - Operating frequency From 860 to 930MHz. - Wireless protocol, Proprietary frequency hopping, self-configuring, load-balancing mesh network - Wired network protocol, TCP/IP (one IP address needed per Gateway), SNMP interface with support for traps - Firmware updates Wireless over the air - Typical transmission range 10 to 50 meters indoors from any one device to any other - Antenna Fully enclosed, fixed configuration - Sensor to Gateway ratio, Up to 300 monitors per gateway - Unlimited gateways per site with multi-site support - ±1° C at 0.1° C temperature resolution with readings in C or F. - Relative Humidity, From 0 to 100% RH at ±2 % RH at 0.1% resolution - Dry Contact, 0.5 sec state switch time. open>500K ohm, closed
Transcript of Select-Info Packet Power, Environmental Sensor With Mesh Wi-Fi Data Transmission
Sends e-mail and SMS in case a user defined threshold is violated Each unit can gather temperature readings from up to 10 temperature probes Self-configuring wireless mesh network of monitoring devices Centralized analyzing and management through local software application or via Packet Power’s cloud
based service Probe temperature reading range -40 to 85° C High precision measurement (±1° C, ±2% RH) Map temperature readings to facility layout diagram Access real time information, create historical reports and export to CSV file Create and publish dashboards and QR labels Optional Smart Power Cables record detailed power usage in real time (A, V, W, VA, kWh and
frequency) Requires just one Ethernet port and IP address
Specifications:
- Operating frequency From 860 to 930MHz. - Wireless protocol, Proprietary frequency hopping, self-configuring, load-balancing mesh network - Wired network protocol, TCP/IP (one IP address needed per Gateway), SNMP interface with support for traps - Firmware updates Wireless over the air - Typical transmission range 10 to 50 meters indoors from any one device to any other - Antenna Fully enclosed, fixed configuration - Sensor to Gateway ratio, Up to 300 monitors per gateway - Unlimited gateways per site with multi-site support - ±1° C at 0.1° C temperature resolution with readings in C or F. - Relative Humidity, From 0 to 100% RH at ±2 % RH at 0.1% resolution - Dry Contact, 0.5 sec state switch time. open>500K ohm, closed<2.5K ohm - Differential Pressure, ±500 Pa (±2”H20), 0.2Pa or ±3% accuracy full span
Lyan Center, 1st floor, Ashrafieh, Beirut Tel/Fax: +961 (0)1 42 35 35 / 42 37 37 [email protected] www.select-info.net
Environmental Sensor With Mesh Wi-Fi Data Transmission Collects temperature and humidity readings and sends alerts by e-mail and SMS
Detects other smart sensors and automatically form a wireless network Add or remove a smart sensor and the system automatically adapts
Differential pressure monitor Temperature monitor and probes Mesh Ethernet Gateway
