SEIKO ORGATECH December 2006 SEIKO Optical Products.
-
Upload
joanna-ross -
Category
Documents
-
view
269 -
download
1
Transcript of SEIKO ORGATECH December 2006 SEIKO Optical Products.
Remarkable FeaturesResistance to 1. Heat 2. Deformation 3. Scratch
High-Technology 1. Single Vision AZ 2. Inner Progressive SS 3. Inner Progressive EM
With High-valued Coating 1. Dust-resistance 2. Scratch-resistance 3. Shock-resistance
SEIKO ORGATECHSEIKO ORGATECH
New Technology
Crack-Free
Specifications (Balance Chart)
0
5
10
15Heat Resistance
Static Press Test
Weather Test
Humidity Test
Hot Water Test
Soap Resistance
Acid Resistance
Transmittance
Scratch Resistance
Drop Ball Test
ConventionalHMCORGATECH
Remarkable Features 1. Heat-resistance up to 120℃ without any crack
2. Deformation-resistance No Crack at 100kg with the pressure by Edger Machine Crack-Free
3. Scratch-resistance Enough strength against scratch, hard to recognize tiny scratch
Features ( Data )
Test Item ORGATECH Existing Item(SSV HAMC)
Anti-Heat (uncut) 120℃ 80℃
(edging) 85℃ *1 70℃
Pressure over 100kg 60kg
Anti-Scratch(by Wire-brush) ○ △
*1 Crack occur at 100℃ even after edging. However, due to the deformation of Lens itself, the correct power cannot be measured. Therefore, we would say this temperature.
Mechanism of ORGATECHbefore Heating and Deformation
Hard-coat
Lens Resin
Inorganic AR
ORGATECH
Conventional Composition
“Inorganic” AR applied to
Conventional Lenses
“Organic” AR applied to ORGATECH
Organic AR
Exclusive Hard-coat
Lens Resin
*Elastic ratio of the materials of “Multi-coat” and “Lens Resin & Hard-coat” is totally different, at 200 times.
Crack on Deformation by Heat
Heating & Deforming
Expansion
ORGATECH
Conventional Composition
cannot follow the expansion of Lens
Resin
ORGATECH can follow the expansion properly
Hard-coat
Lens Resin
Inorganic AR
Exclusive Hard-coat
Lens Resin
Organic AR
Crack on Deformation by Heat
further Heating & Deforming
ORGATECH
Conventional Composition
Crack!
No Crack!
Hard-coat
Lens Resin
Inorganic AR
Organic AR
Exclusive Hard-coat
Lens Resin
Expansion
Heat-resistance Heating at 100℃
ORGATECH Conventional
No Crack
*Crack occur at 100 even after edging. However, due to the ℃deformation of Lens itself, the actual wearing is up to 85 .℃
Scratch-resistance(30 times by Wire-brush at 1kg)
ConventionalORGATECH
many Scratchesa few Scratches
Scratch-resistance(10 times by Wire-brush at 1kg)
ORGATECH
Conventional
with diffused reflection
less diffused reflection
With Super Clean Coat
Advanced Super Clean Coat as standard
< drop Oil > < with Wind >
Conventional
ORGATECH
Conventional
ORGATECH
What is the benefit? (for Consumer)
Resistance to Heat, Scratch, Dirt (Stain)In the car ( about 80℃ )Barbecue, Cocking (reflective heat, smoke, oil)
Beach in Summer (reflective heat, sand, sea water)
Less Crack, Scratch on tough occasion on “careless”, “accidental” occasion
Safety! Comfort! Durability!
Resistance to Heat, Pressure, Scratch too much pressure by chucking (deformation,
pressure)
edging for plastic frame (heat, deformation)
handling procedure (unintentional scratch)
reduce the loss on edging occasion release from “complaint against Crack, Scratch”
Increase Customer Satisfaction!
What is the benefit? (for Optician)
ORGATECH Line-up 3 types of ORGATECH Single Vision :
ORGATECH Z1.67 (SOT Z167) (Double Aspheric Type)
Progressive :ORGATECH SS1.67 (SOT SS167)
(Custom-made Hybrid Type)ORGATECH EM1.67 (SOT EM167)
(Standard Hybrid Type)