Turbo-Max™

TILLAGE SYSTEMSPREPARATION

SEEDBED

Yield-Pro® Planters Vertical Tillage Conventional Tillage HD DrillsPlanting Components

Great PlainsProduct Lines

SEEDBED PREPARATIONManaging the soil profile to

maximize water uptake and

prepping your seedbed are

critical. Regardless of your

farming practices, Great Plains

literally has every piece of

tillage equipment you need,

including our new Turbo-Max™.

Turbo-Max is tearing up the

competition with its innovative

design and features.

NUTRIENT APPLICATIONFor maximum plant benefit,

precise placement of High

Value Nutrients is a must. By

applying nutrients at the right

time, you can virtually eliminate

leaching and denitrification.

The Great Plains Nutri-Pro® and

sprayer lines are the perfect

solution to help you increase

utilization while reducing costs.

SEED PLACEMENTTo maximize yield, three things

must be done well: seed

spacing, seed depth, and

seed-to-soil contact without

sidewall compaction. Great

Plains Drills and Planters are

designed and built using these

principles. Again, no matter

what your farming practices,

we have the right seeding

configuration to achieve a

uniform stand in a variety of

crops. We are the seed place-

ment specialists!

No-Till DrillsMin-Till Drills SprayersAir Drills Compact Drills Fertilizer Applicators

CONTENTS04 TILLAGE SPECS

06 VERTICAL TILLAGE TOOLS

08 TURBO-TILL®

10 TURBO-CHOPPER®

12 TURBO-MAX™

14 ULTRA-TILL®

16 SUB-SOILER

18 TURBO-CHISEL®

20 CONVENTIONAL TILLAGE TOOLS

22 8000 SERIES DISC-O-VATOR

24 DISK HARROW

26 8000 SERIES FIELD CULTIVATOR

28 SEEDBED CONDITIONER

30 PLAINS PLOW

32 FLEX HARROW

34 COMPANY INFO

36 GPAC FINANCING

MODEL INFO Turbo-Chisel (pg 18-19) continuedMODELS TC5315 TC5317 TC5319 TC5321 TC5323

SHANK SPACING 15" 15" 15" 15" 15"

COULTER SPACING 7.5" 7.5" 7.5" 7.5" 7.5"

TIRES (6)12.5Lx15 F-ply

WEIGHT (approx. lbs.) 12,900 13,700 14,200 15,650 16,250

PTO H.P. REQ (min) 25 to 30 hp per shank

DIMENSIONSTILLAGE WIDTH 18' 9" 21' 3" 23' 9" 26' 3" 28' 9"

WIDTH (transport) 14' 6" 14' 6" 14' 6" 14' 6" 14' 6"

HEIGHT (transport) 10' 3" 11' 12' 3" 13' 6" 14' 6"

TILLAGE INFOCENTER SECTION 10' 10' 10' 10' 10'

1ST WING SECTION 4' 9" 6' 7' 3" 8' 9" 9' 6"

2ND WING SECTION N/A N/A N/A N/A N/A

MODEL INFO Turbo-Till® Series II (pg 8-9) Turbo-Chopper® (pg 10-11) Turbo-Max™ (pg 12-13) Ultra-Till® (pg 14-15) Sub-Soiler (pg 16-17) Turbo-Chisel (pg 18-19)MODELS 1200TT 1500TT 1800TT 2400TT 3000TT 4000TT 1200TC 1500TC 1800TC 2400TC 3000TC 4000TC 1200TM 1500TM 1800TM 2400TM 3000TM UT3030 UT5036 UT5042 UT5052 SS1300 SS1700 SS1800 SS2000 TCN5107 TCN5309 TCN5311 TCN5313 TC5109 TC5111 TC5113 TC5115 TC5313

SHANK SPACING N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A *24", 30", 36", 38", 40" 15" 15" 15" 15" 15" 15" 15" 15" 15"

COULTER SPACING 5" (2 offset gangs at 10" spacing per gang) 10" 3.75" (2 offset gangs at 7.5" spacing per gang) 8" 8" 8" 8" N/A N/A N/A N/A 7.5" 7.5" 7.5" 7.5" 7.5" 7.5" 7.5" 7.5" 7.5"

TIRES 11Lx15 F-ply

11Lx15 F-ply

380/55R16.5

11Lx15F-ply

12.5Lx15F-ply

380/55R16.5

11Lx15F-ply

11Lx15F-ply

380/55R16.5

11Lx15F-ply

12.5Lx15F-ply

380/55R16.5

11Lx15F-ply

12.5Lx1512-ply

380/55R16.5

12.5Lx16.5G-ply

380/55R16.5

(4)11Lx15F-ply

(4)11Lx15F-ply

(4)12.5Lx15F-ply

(4)15x16.5 Skid Steer

20.5x810-ply

20.5x810-ply

20.5x810-ply

20.5x810-ply (4)12.5Lx15 12-ply

WEIGHT (approx. lbs.) **10,000 **12,200 **14,400 **18,600 **21,000 **25,800 **10,000 **12,200 **14,400 **18,600 **21,000 **25,800 **11,900 **13,300 **15,200 **19,100 **23,300 12,000 14,700 17,450 21,500 3 Shank 3,170 7 Shank 5,509 6 Shank 4,850 8 Shank 6,350 7,300 10,500 11,500 12,100 8,080 9,835 11,240 12,600 11,280

PTO H.P. REQ (min) 115+ 145+ 165+ 225+ 285+ 380+ 115+ 145+ 165+ 225+ 285+ 380+ 115+ 145+ 165+ 225+ 285+ 150-200 180-250 200-300 300+ 50 per shank 50 per shank 50 per shank 50 per shank 30 per shank

DIMENSIONSTILLAGE WIDTH 12' 15' 18' 24' 30' 40' 12' 15' 18' 24' 30' 40' 12' 15' 18' 24' 30' 30' 36' 42' 52' 16' 18' 20' 25' 8' 9" 11' 3" 13' 9" 16' 3" 11' 3" 13' 9" 16' 3" 18' 9" 16' 3"

WIDTH (transport) 12' 3" 15' 6" 12' 3" 15' 6" 15' 6" 17' 6" 12' 3" 15' 7" 12' 3" 15' 7" 15' 7" 17' 6" 14' 16' 11" 14' 15' 4" 15' 4" 14' 8" 16' 7" 16' 7" 18' 11" 11' 8" 14-19' 5" 13' 1" 15' 5" 9' 9' 10" 9' 10" 9' 10" 11' 6" 14' 3" 16' 6" 19' 3" 14' 6"

HEIGHT (transport) N/A N/A 8' 9" 10' 3" 13' 6" 14' 3" N/A N/A 8' 9" 10' 3" 13' 6" 14' 3" 5' 4" 5' 4" 8' 3" 11' 3" 14' 14' 4" 12' 8" 14' 3" 15' 6" N/A N/A N/A N/A 5' 9" 9' 5" 9' 10" 10' 3" N/A N/A N/A N/A 9' 6"

TILLAGE INFOCENTER SECTION 12' 15' 8' 10' 10' 12' 12' 15' 8' 10' 10' 12' 12' 15' 8' 10' 10' 10' 10' 10' 12' 6" N/A N/A N/A N/A 9' 9' 9' 9' 10' 10' 10' 10' 10'

1ST WING SECTION N/A N/A 5' 6' 9" 10' 10' N/A N/A 5' 6' 9" 10' 10' N/A N/A 5' 6' 9" 10' 9' 6" 8' 6" 9' 6" 10' 6" N/A N/A N/A N/A N/A 1' 9" 2' 6" 3' 9" N/A 2' 6" 3' 6" 4' 9" 3' 6"

2ND WING SECTION N/A N/A N/A N/A N/A 4' N/A N/A N/A N/A N/A 4' N/A N/A N/A N/A N/A N/A 4' 6' 6" 8' 6" N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A

MODEL INFO 8000 Series Disc-O-Vator (pg 22-23) Disk Harrow (pg 24-25) 8000 Series Field Cultivator (pg 26-27)MODELS 8315DVN 8318DVN 8321DVN 8324DVN 8321DV 8324DV 8326DV 8328DV 8333DV 8537DV 8544DV 8548DV 8552DV 3323DH 3326DH 3329DH 4330DH 4333DH 4336DH 8323FC 8328FC 8332FC 8336FC 8539FC 8544FC 8548FC 8551FC 8556FC 8560FC

NUMBER OF BLADES 24 28 32 36 30 36 38 42 48 54 64 70 76 9"66,7.5"78 9"74,7.5"86 9"82,7.5"98 9"86,7.5"102 9"94,7.5"110 9"102,7.5"122 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A

NUMBER OF SWEEPS 27 31 37 41 35 41 45 49 57 63 75 81 89 N/A N/A N/A N/A N/A N/A 39 47 55 61 67 75 83 87 95 103

TIRES 12.5Lx16.5 G-ply 9.5Lx15 8-ply 11L-15SL 12-ply 11Lx15 F-ply 12.5Lx15 F-ply 12.5Lx16.5 G-ply 11Lx15 8-ply 11Lx15 12-ply 12.5Lx15 F-ply (4)9.5Lx15 8-ply (4)11Lx15 12-ply (4)11Lx15 F-ply (4)12.5Lx15 F-ply

WEIGHT (approx.) 6,650 8,000 9,200 11,000 8,925 10,200 11,050 11,890 14,025 15,392 18,320 19,968 21,632 12,000 13,800 15,000 17,200 18,500 20,000 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A

PTO H.P. REQ (min) 115-135 135-155 155-185 185-200 125-175 160-210 200-250 225-275 250-300 280-340 320-380 340-400 375+ 160-230 182-260 203-290 210-300 231-330 252-360 120-175 150-200 175-220 200-250 200-275 225-300 250-325 275-350 300-375 325-400

DIMENSIONSTILLAGE WIDTH 15' 9" 17' 10" 21' 7" 23' 9" 20' 23' 9" 25' 3" 28' 32' 36' 42' 9" 46' 6" 50' 9" 23' 1" 26' 28' 9" 30' 2" 33' 1" 35' 11" 23' 27' 9" 32' 6" 36' 39' 6" 44' 48' 9" 51' 55' 9" 60' 6"

WIDTH (transport) 9' 10" 9' 10" 9' 10" 9' 10" 14' 14' 14' 14' 16' 1" 15' 15' 18' 3" 18' 3" 13' 10" 13' 10" 13' 10" 17' 10" 17' 10" 17' 10" 14' 14' 14' 16' 1" 15' 15' 15' 16' 10" 16' 10" 16' 10"

HEIGHT (transport) 8' 6" 9' 6" 10' 9" 12' 3" 9' 3" 10' 9" 12' 13' 3" 14' 3" 12' 6" 13' 3" 14' 9" 14' 9" 11' 12' 4" 13' 8" 12' 4" 13' 8" 15' 10' 12' 6" 14' 8" 15' 3" 11' 9" 14' 14' 14' 16' 4" 16' 4"

TILLAGE INFOCENTER SECTION 8' 8' 8' 8' 9' 9" 9' 9" 9' 9" 9' 9" 12' 9' 9" 9' 9" 12' 12' 9' 6" 9' 6" 9' 6" 13' 6" 13' 6" 13' 6" 10' 10' 10' 12' 10' 10' 10' 12' 12' 12'

1ST WING SECTION 3.5' 5' 6.5' 8' 5' 6" 7' 6" 8' 6" 9' 6" 10' 6" 8' 6" 9' 6" 10' 9" 10' 9" 6' 1" 7' 6" 8' 11" 7' 6" 8' 11" 10' 4" 6' 6" 9' 11' 3" 11' 3" 8' 10' 6" 10' 6" 10' 6" 12' 9" 12' 9"

2ND WING SECTION N/A N/A N/A N/A N/A N/A N/A N/A N/A 5' 7' 3" 7' 9' 3" N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 6' 6" 6' 6" 9' 9' 9' 11'

MODEL INFO Seedbed Conditioner (pg 28-29) Plains Plow (pg 30-31) Flex Harrow (pg 32-33)MODELS 2112 2115 2317 2320 2322 2325 2327 2330 2332 2335 2536 2538 2541 2543 2546 2548 2551 9322PP 9326PP 9533PP 9540PP 9744PP 9748PP 9752PP 9756PP 6424HD 6630HD 6636HD 6642HD 6845HD 6848HD 6851HD

NUMBER OF BLADES N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 6 7 9 11 12 13 14 15 N/A N/A N/A N/A N/A N/A N/A

NUMBER OF SHANKS N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 6 7 9 11 12 13 14 15 N/A N/A N/A N/A N/A N/A N/A

TIRES 9.5Lx15 8-ply 11Lx15 8-ply 11Lx15 12-ply 11Lx15 F-ply 11Lx15 F-ply 12.5Lx15 8-ply 12.5Lx1512-ply

WEIGHT (approx. lbs) 1,701 2,025 2,675 3,040 3,435 3,600 4,200 4,560 4,955 5,320 6,120 6,460 6,970 7,310 7,820 8,160 8,670 8,160 9,220 11,500 13,480 17,300 18,620 19,220 20,540 N/A N/A N/A N/A N/A N/A N/A

PTO H.P. REQ (min) N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 150-205 180-240 230-305 285-370 310-405 335-440 360-478 385-510 5 hp per foot

DIMENSIONSTILLAGE WIDTH 12' 6" 15 17' 6" 20' 22' 6" 25' 27' 6" 30' 32' 6" 35' 36' 38' 6" 41' 43' 6" 46' 48' 6" 51' 22' 4" 26' 33' 4" 40' 8" 44' 4" 48' 51' 8" 55' 4" 24' 30' 36' 42' 45' 48' 51'

WIDTH (transport) 14' 3" 16' 10" 15' 15' 15' 15' 15' 15' 17' 6" 17' 6" 16' 6" 16' 6" 16' 6" 16' 6" 16' 6" 16' 6" 16' 6" 13' 16' 8" 18' 18' 21' 10" 25' 6" 21' 10" 25' 6" 12' 8" 12' 8" 12' 8" 12' 8" 12' 8" 12' 8" 12' 8"

HEIGHT (transport) N/A N/A 7' 11" 9' 1" 10' 3" 11' 5" 12' 7" 13' 9" 13' 9" 14' 11" 12' 6" 12' 6" 12' 6" 13' 9" 13' 9" 13' 9" 15' 12' 6" 12' 6" 14' 6" 13' 6" 14' 6" 14' 6" 14' 6" 14' 6" 10' 10" 10' 10" 10' 10" 10' 10" 10' 10" 10' 10" 10' 10"

TILLAGE INFOCENTER SECTION 12' 15' 10' 10' 10' 10' 10' 10' 12' 12' 12' 12' 12' 12' 12' 12' 12' 7' 6" 10' 10' 10' 7' 6" 10' 7' 6" 10' 12' 12' 12' 12' 12' 12' 12'

1ST WING SECTION N/A N/A 4' 5' 6' 7' 6" 9' 10' 10' 12' 8' 8' 8' 9' 6" 9' 6" 9' 6" 10' 6" 8' 8' 7' 8' 7' 6" 7' 7' 6" 7' 6" 6' 9' 12' 15' 16' 6" 18' 19' 6"

2ND WING SECTION N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 4' 5' 6' 6' 7' 6" 8' 6" 8' 6" N/A N/A 4' 7' 7' 7' 8' 8' N/A N/A N/A N/A N/A N/A N/A

3RD WING SECTION N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 4' 4' 7' 7' N/A N/A N/A N/A N/A N/A N/A

MODEL INFO Turbo-Till® Series II (pg 8-9) Turbo-Chopper® (pg 10-11) Turbo-Max™ (pg 12-13) Ultra-Till® (pg 14-15) Sub-Soiler (pg 16-17) Turbo-Chisel (pg 18-19)MODELS 1200TT 1500TT 1800TT 2400TT 3000TT 4000TT 1200TC 1500TC 1800TC 2400TC 3000TC 4000TC 1200TM 1500TM 1800TM 2400TM 3000TM UT3030 UT5036 UT5042 UT5052 SS1300 SS1700 SS1800 SS2000 TCN5107 TCN5309 TCN5311 TCN5313 TC5109 TC5111 TC5113 TC5115 TC5313

SHANK SPACING N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A *24", 30", 36", 38", 40" 15" 15" 15" 15" 15" 15" 15" 15" 15"

COULTER SPACING 5" (2 offset gangs at 10" spacing per gang) 10" 3.75" (2 offset gangs at 7.5" spacing per gang) 8" 8" 8" 8" N/A N/A N/A N/A 7.5" 7.5" 7.5" 7.5" 7.5" 7.5" 7.5" 7.5" 7.5"

TIRES 11Lx15 F-ply

11Lx15 F-ply

380/55R16.5

11Lx15F-ply

12.5Lx15F-ply

380/55R16.5

11Lx15F-ply

11Lx15F-ply

380/55R16.5

11Lx15F-ply

12.5Lx15F-ply

380/55R16.5

11Lx15F-ply

12.5Lx1512-ply

380/55R16.5

12.5Lx16.5G-ply

380/55R16.5

(4)11Lx15F-ply

(4)11Lx15F-ply

(4)12.5Lx15F-ply

(4)15x16.5 Skid Steer

20.5x810-ply

20.5x810-ply

20.5x810-ply

20.5x810-ply (4)12.5Lx15 12-ply

WEIGHT (approx. lbs.) **10,000 **12,200 **14,400 **18,600 **21,000 **25,800 **10,000 **12,200 **14,400 **18,600 **21,000 **25,800 **11,900 **13,300 **15,200 **19,100 **23,300 12,000 14,700 17,450 21,500 3 Shank 3,170 7 Shank 5,509 6 Shank 4,850 8 Shank 6,350 7,300 10,500 11,500 12,100 8,080 9,835 11,240 12,600 11,280

PTO H.P. REQ (min) 115+ 145+ 165+ 225+ 285+ 380+ 115+ 145+ 165+ 225+ 285+ 380+ 115+ 145+ 165+ 225+ 285+ 150-200 180-250 200-300 300+ 50 per shank 50 per shank 50 per shank 50 per shank 30 per shank

DIMENSIONSTILLAGE WIDTH 12' 15' 18' 24' 30' 40' 12' 15' 18' 24' 30' 40' 12' 15' 18' 24' 30' 30' 36' 42' 52' 16' 18' 20' 25' 8' 9" 11' 3" 13' 9" 16' 3" 11' 3" 13' 9" 16' 3" 18' 9" 16' 3"

WIDTH (transport) 12' 3" 15' 6" 12' 3" 15' 6" 15' 6" 17' 6" 12' 3" 15' 7" 12' 3" 15' 7" 15' 7" 17' 6" 14' 16' 11" 14' 15' 4" 15' 4" 14' 8" 16' 7" 16' 7" 18' 11" 11' 8" 14-19' 5" 13' 1" 15' 5" 9' 9' 10" 9' 10" 9' 10" 11' 6" 14' 3" 16' 6" 19' 3" 14' 6"

HEIGHT (transport) N/A N/A 8' 9" 10' 3" 13' 6" 14' 3" N/A N/A 8' 9" 10' 3" 13' 6" 14' 3" 5' 4" 5' 4" 8' 3" 11' 3" 14' 14' 4" 12' 8" 14' 3" 15' 6" N/A N/A N/A N/A 5' 9" 9' 5" 9' 10" 10' 3" N/A N/A N/A N/A 9' 6"

TILLAGE INFOCENTER SECTION 12' 15' 8' 10' 10' 12' 12' 15' 8' 10' 10' 12' 12' 15' 8' 10' 10' 10' 10' 10' 12' 6" N/A N/A N/A N/A 9' 9' 9' 9' 10' 10' 10' 10' 10'

1ST WING SECTION N/A N/A 5' 6' 9" 10' 10' N/A N/A 5' 6' 9" 10' 10' N/A N/A 5' 6' 9" 10' 9' 6" 8' 6" 9' 6" 10' 6" N/A N/A N/A N/A N/A 1' 9" 2' 6" 3' 9" N/A 2' 6" 3' 6" 4' 9" 3' 6"

2ND WING SECTION N/A N/A N/A N/A N/A 4' N/A N/A N/A N/A N/A 4' N/A N/A N/A N/A N/A N/A 4' 6' 6" 8' 6" N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A

MODEL INFO 8000 Series Disc-O-Vator (pg 22-23) Disk Harrow (pg 24-25) 8000 Series Field Cultivator (pg 26-27)MODELS 8315DVN 8318DVN 8321DVN 8324DVN 8321DV 8324DV 8326DV 8328DV 8333DV 8537DV 8544DV 8548DV 8552DV 3323DH 3326DH 3329DH 4330DH 4333DH 4336DH 8323FC 8328FC 8332FC 8336FC 8539FC 8544FC 8548FC 8551FC 8556FC 8560FC

NUMBER OF BLADES 24 28 32 36 30 36 38 42 48 54 64 70 76 9"66,7.5"78 9"74,7.5"86 9"82,7.5"98 9"86,7.5"102 9"94,7.5"110 9"102,7.5"122 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A

NUMBER OF SWEEPS 27 31 37 41 35 41 45 49 57 63 75 81 89 N/A N/A N/A N/A N/A N/A 39 47 55 61 67 75 83 87 95 103

TIRES 12.5Lx16.5 G-ply 9.5Lx15 8-ply 11L-15SL 12-ply 11Lx15 F-ply 12.5Lx15 F-ply 12.5Lx16.5 G-ply 11Lx15 8-ply 11Lx15 12-ply 12.5Lx15 F-ply (4)9.5Lx15 8-ply (4)11Lx15 12-ply (4)11Lx15 F-ply (4)12.5Lx15 F-ply

WEIGHT (approx.) 6,650 8,000 9,200 11,000 8,925 10,200 11,050 11,890 14,025 15,392 18,320 19,968 21,632 12,000 13,800 15,000 17,200 18,500 20,000 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A

PTO H.P. REQ (min) 115-135 135-155 155-185 185-200 125-175 160-210 200-250 225-275 250-300 280-340 320-380 340-400 375+ 160-230 182-260 203-290 210-300 231-330 252-360 120-175 150-200 175-220 200-250 200-275 225-300 250-325 275-350 300-375 325-400

DIMENSIONSTILLAGE WIDTH 15' 9" 17' 10" 21' 7" 23' 9" 20' 23' 9" 25' 3" 28' 32' 36' 42' 9" 46' 6" 50' 9" 23' 1" 26' 28' 9" 30' 2" 33' 1" 35' 11" 23' 27' 9" 32' 6" 36' 39' 6" 44' 48' 9" 51' 55' 9" 60' 6"

WIDTH (transport) 9' 10" 9' 10" 9' 10" 9' 10" 14' 14' 14' 14' 16' 1" 15' 15' 18' 3" 18' 3" 13' 10" 13' 10" 13' 10" 17' 10" 17' 10" 17' 10" 14' 14' 14' 16' 1" 15' 15' 15' 16' 10" 16' 10" 16' 10"

HEIGHT (transport) 8' 6" 9' 6" 10' 9" 12' 3" 9' 3" 10' 9" 12' 13' 3" 14' 3" 12' 6" 13' 3" 14' 9" 14' 9" 11' 12' 4" 13' 8" 12' 4" 13' 8" 15' 10' 12' 6" 14' 8" 15' 3" 11' 9" 14' 14' 14' 16' 4" 16' 4"

TILLAGE INFOCENTER SECTION 8' 8' 8' 8' 9' 9" 9' 9" 9' 9" 9' 9" 12' 9' 9" 9' 9" 12' 12' 9' 6" 9' 6" 9' 6" 13' 6" 13' 6" 13' 6" 10' 10' 10' 12' 10' 10' 10' 12' 12' 12'

1ST WING SECTION 3.5' 5' 6.5' 8' 5' 6" 7' 6" 8' 6" 9' 6" 10' 6" 8' 6" 9' 6" 10' 9" 10' 9" 6' 1" 7' 6" 8' 11" 7' 6" 8' 11" 10' 4" 6' 6" 9' 11' 3" 11' 3" 8' 10' 6" 10' 6" 10' 6" 12' 9" 12' 9"

2ND WING SECTION N/A N/A N/A N/A N/A N/A N/A N/A N/A 5' 7' 3" 7' 9' 3" N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 6' 6" 6' 6" 9' 9' 9' 11'

MODEL INFO Seedbed Conditioner (pg 28-29) Plains Plow (pg 30-31) Flex Harrow (pg 32-33)MODELS 2112 2115 2317 2320 2322 2325 2327 2330 2332 2335 2536 2538 2541 2543 2546 2548 2551 9322PP 9326PP 9533PP 9540PP 9744PP 9748PP 9752PP 9756PP 6424HD 6630HD 6636HD 6642HD 6845HD 6848HD 6851HD

NUMBER OF BLADES N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 6 7 9 11 12 13 14 15 N/A N/A N/A N/A N/A N/A N/A

NUMBER OF SHANKS N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 6 7 9 11 12 13 14 15 N/A N/A N/A N/A N/A N/A N/A

TIRES 9.5Lx15 8-ply 11Lx15 8-ply 11Lx15 12-ply 11Lx15 F-ply 11Lx15 F-ply 12.5Lx15 8-ply 12.5Lx1512-ply

WEIGHT (approx. lbs) 1,701 2,025 2,675 3,040 3,435 3,600 4,200 4,560 4,955 5,320 6,120 6,460 6,970 7,310 7,820 8,160 8,670 8,160 9,220 11,500 13,480 17,300 18,620 19,220 20,540 N/A N/A N/A N/A N/A N/A N/A

PTO H.P. REQ (min) N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 150-205 180-240 230-305 285-370 310-405 335-440 360-478 385-510 5 hp per foot

DIMENSIONSTILLAGE WIDTH 12' 6" 15 17' 6" 20' 22' 6" 25' 27' 6" 30' 32' 6" 35' 36' 38' 6" 41' 43' 6" 46' 48' 6" 51' 22' 4" 26' 33' 4" 40' 8" 44' 4" 48' 51' 8" 55' 4" 24' 30' 36' 42' 45' 48' 51'

WIDTH (transport) 14' 3" 16' 10" 15' 15' 15' 15' 15' 15' 17' 6" 17' 6" 16' 6" 16' 6" 16' 6" 16' 6" 16' 6" 16' 6" 16' 6" 13' 16' 8" 18' 18' 21' 10" 25' 6" 21' 10" 25' 6" 12' 8" 12' 8" 12' 8" 12' 8" 12' 8" 12' 8" 12' 8"

HEIGHT (transport) N/A N/A 7' 11" 9' 1" 10' 3" 11' 5" 12' 7" 13' 9" 13' 9" 14' 11" 12' 6" 12' 6" 12' 6" 13' 9" 13' 9" 13' 9" 15' 12' 6" 12' 6" 14' 6" 13' 6" 14' 6" 14' 6" 14' 6" 14' 6" 10' 10" 10' 10" 10' 10" 10' 10" 10' 10" 10' 10" 10' 10"

TILLAGE INFOCENTER SECTION 12' 15' 10' 10' 10' 10' 10' 10' 12' 12' 12' 12' 12' 12' 12' 12' 12' 7' 6" 10' 10' 10' 7' 6" 10' 7' 6" 10' 12' 12' 12' 12' 12' 12' 12'

1ST WING SECTION N/A N/A 4' 5' 6' 7' 6" 9' 10' 10' 12' 8' 8' 8' 9' 6" 9' 6" 9' 6" 10' 6" 8' 8' 7' 8' 7' 6" 7' 7' 6" 7' 6" 6' 9' 12' 15' 16' 6" 18' 19' 6"

2ND WING SECTION N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 4' 5' 6' 6' 7' 6" 8' 6" 8' 6" N/A N/A 4' 7' 7' 7' 8' 8' N/A N/A N/A N/A N/A N/A N/A

3RD WING SECTION N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 4' 4' 7' 7' N/A N/A N/A N/A N/A N/A N/A

Tillage Specs 4 | 5

Note: All specifications subject to change without notice. *24-inch spacing available on even number of shank models only.

^ Models Available Fall 2012 **Approximate maximum weights with attachments.

VERTICAL TILLAGE

• Horizontal tillage leaves yield-robbing density-change layers in the soil.

• Roots in a top, lower-density layer are turned sideways when a higher-density layer is encountered.

• Vertical tillage leaves a uniform, unrestricted soil profile that promotes maximum root development and increased yields.

• Plants raised in a vertical tillage system are more drought resistant, reach and utilize more nutrients, and have greater standability due to healthier stalks and root systems.

• Vertical tillage INCREASES YIELDS!

Tillage?Why Vertical

Vertical TillageConventional Tillage

Field Cultivator

Disk

Plow

- Finishing tool that levels the soil without using sweeps. This tool evenly distributes residue and levels the field without causing a density change that can discourage root growth.

- Designed for the corn-on-corn producers to loosen all root balls, size residue, and leave the ground level enough for one pass in the spring. Runs up to 12" deep.

- Eliminates compaction layers and soil density changes in one pass. Choice of no-till or straight leg shanks.

- Very versatile tool that sizes residue and prepares the seedbedwithout introducing yield-damaging horizontal layers.

- Allows for a “crisscross” pattern for chopping residue and working the soil while still maintaining the benefits of vertical tillage.

-With its 7-1/2" blade spacing and adjustable gang angle from 0° to 6°, provides more aggressive ground leveling, weed removal, and enhanced residue sizing.

Vertical Tillage Tools 6 | 7

ULTRA-TILL®

TURBO-CHISEL®SUB-SOILER (Shown with optional pull hitch.)

TURBO-TILL® SERIES II TURBO-CHOPPER®

TURBO-MAX™

The Series II Turbo-Till® builds on the solid reputation of theoriginal Turbo-Till as the most versatile vertical tillage toolavailable. It utilizes two ranks of our exclusive Turbo Coulters to aggressively chop residue without hairpinning. Turbo-Till effectively manages residue and reduces compaction in a wide range of conditions, providing a consistent well-prepared seedbed for planting. Improvements to the Series II include 3" C-shank standards and

heavy-duty rubber mounted gang bearings as standard equipment. New 12', 15', 18', and 24' working widths have been added to the 30' and 40' models to better fit available horsepower. Current uses include warming and drying cool wet soils, incorporating animal waste, and preparing a consistent, well-prepared seedbed for planting. Turbo-Till is also an excellent fall tool to size and incorporate residue to promote the decaying process.

DROP AXLE - The greaseless anti-rotational pivot pin virtually eliminates wear in the drop axle pivot.

RUBBER MOUNTED BEARINGS - Greaseable heavy-duty self-aligning gang bearings provide ex-cellent wear life and outstanding rock protection.

TURBO COULTER - The turbo design allows the blade flute to attack the residue vertically, provid-ing improved cutting, penetration, and decreased hairpinning.

ATTACHMENT

HYDRAULIC WEIGHT TRANSFER - Transfer valve adjusts weight from center to wings, providing even, constant down pressure to the full width.

Rolling Harrow & Reel

TURBO-TILL - Turbo Coult-ers combined with Patented Rolling Spike Harrows create a smooth level surface on top of the ground and at the planting depth ensuring the planter runs smoothly and seed is precisely placed into a firm seedbed for quick emergence.

SPRING COULTERS - Spring coulter machines raise and lower (vibrate) as soil density changes, leaving a rough, uneven sub-sur-face. A planter following a spring coulter machine has a tough time placing seed accurately.

CONCAVE FLUTED COULTERS - Concave fluted coulters/disks may look like Turbo Coulters, but move soil horizontally, causing compaction. Concave blades running at an angle cause ridging at high speeds. The uneven sub-surface results in poor seed placement and emergence.

Smooth

Rough

Compacted

Features &Benefits

Tillage Pass Planter Pass

Gre

at P

lain

sCo

mpe

titor

Com

petit

or

1200TT

2400TT1800TT

4000TT

MO

DEL

S

1500TT

3000TT

Turbo-Till® Series II 8 | 9

Leadingthe Pack

CHOPPER GANGS - Both the Turbo gang and the chopper gang are suspended by 1" x 3" C-shanks and both gangs use the heavy-duty 211 rubber-cushioned bearing in cast housing to provide reliable service.

ROLLING SPIKE HARROW - Loosens, levels, and breaks up clods. This attachment puts the “finish-ing touch” on the perfect seedbed.

CHOPPER BLADES - The angled chopper blades run perpendicular to the Turbo Blades ensuring complete and thorough chopping of the residue and a profile that is level and uniform to the depth of the front coulters.

The Turbo-Chopper® from Great Plains combines our aggressive Turbo Blades with the action of a turbo-patterned chopper reel. This allows for a “crisscross” pattern for chopping residue and working the soil while still maintaining the benefits of vertical tillage. This unit offers the versatility of a fall tillage tool combined with its use as a spring tillage unit for seedbed preparation. The “crisscross” pattern of this unit allows for the loosening and removal of root balls. The Turbo Coulters are 20" in diameter with 10" spacing, followed by the 18" diameter chopper reels. Both gangs of coulter and

chopper reels are mounted on heavy 3" C-shanks with rubber-cushioned 211 bearings.

The 18" chopper reels consist of six 4-1/2" high carbon steel blades. The unique spiral design allows constant contact with the soil to maximize cutting and reduce the vibration experienced with competitive reels. The chopper reels work perpendicular to the Turbo Coulters, providing a smooth seedbed for your planter. Our patented rolling harrow and reel combination is the recommended rear attachment for the ultimate seedbed for your planter.

Tillage PassTurbo Coulter Gangs

Turbo Chopper Gangs

TURBO-CHOPPER - Sizes residue from two directions in one pass. Coulters run between each chopper reel and in the middle of the C-shank mounting locations.

HYDRAULIC WEIGHT TRANSFER - Transfer valve ad-justs weight from center to wings, providing even, constant down pressure to the full width.

Features &Benefits

MO

DEL

S

1500TC1200TC

3000TC2400TC1800TC

4000TC

Which seedbed will your planter like?Turbo-Chopper® 10 | 11

Competitor

Turbo-Chopper

Turbowith a Twist

Taking Vertical Tillageto the MAX

The introduction of Turbo-Max™ brings true vertical tillage to new heights! The ability to provide unmatched seedbeds through aggressive ground leveling and weed removal, enhanced residue sizing, and unsurpassed residue coverage makes Turbo-Max truly unique in the industry today. Most farmers have understood the benefits of true vertical tillage for several years, but have needed a way to address uneven fields caused by sprayer, combine, or grain cart tracks, and better residue coverage to help eliminate wind erosion.

Turbo-Max, with its 7-1/2" blade spacing and hydraulically-adjustable gang angle from 0° to 6°, continues to work in a vertical plane through all aspects of operation, providing the answer to today’s producers looking for all of the advantages of true vertical tillage in one piece of equipment. Turbo-Max is the result of Great Plains’ commitment to provide equipment that fulfills the customers’ needs while remaining agronomically sound, producing the best environment for maximum yields.

ROLLING HARROW AND REEL - Loos-ens, levels, and breaks up clods. This attachment puts the “finishing touch” on the perfect seedbed.

*Available Spring, 2013.

Attachment

Turbo-Max™ 12 | 13

7-1/2" BLADE SPACING - Two gangs each with 7-1/2" spacing between coulters with the rear gang offset from the front gang. The gangs work together to size residue to an industry-leading 3-3/4".

HYDRAULICALLY- ADJUSTABLE GANG ANGLE - Turbo-Max allows you to change the gang angle on the go to match it to field conditions. Adjust-ments can be from 0 to 6 degrees.

0 Degree Gang Angle

6 Degree Gang Angle

7.5 7.57.5

1200TM1500TM1800TM2400TM3000TM3500TM*4000TM*

MO

DEL

S

Features &Benefits

HYDRAULIC WEIGHT TRANSFER - Transfer valve adjusts weight from center to wings, providing even, con-stant down pressure to the full width.

HYDRAULIC WEIGHT TRANSFER - Transfer valve ad-justs weight from center to wings, providing even, constant down pressure to the full width.

CONSTANT LEVEL HITCH - The exclusive hitch design provides continuous leveling of the unit as it is raised and lowered.

ROLLING HARROW MODULES - Prepare the perfect seedbed by leveling the ground and crushing the clods.

Ultra-Till® by Great Plains is yet another innovative option in a “systems” approach to vertical tillage. It is intended for secondary field operations and one-pass field finishing prior to planting. The Ultra-Till can be compared to a field finisher or cultivator, but with one major difference. Because it’s not equipped with shank-mounted shovels, it will not create yield-robbing horizontal soil density layers. It is these compacted layers that roots have trouble penetrating.

The Ultra-Till can be equipped with low-concavity disc blades or our exclusive Turbo Coulters on the front to effectively cut residue into manageable pieces and loosen the seedbed soil. Blade depth is controlled hydraulically. Following the front coulters or disc blades are two rows of opposing rolling harrow gangs, angled at 30°. The rear gangs move the residue back into place, leaving a smooth, firm surface for a perfect seedbed.

Features &Benefits

UltimateSeedbed

MO

DEL

S UT3030

UT5052UT5042UT5036

Ultra-Till® 14 | 15

Reel Attachment

Seedbed

The Great Plains InLine Sub-Soiler is another step in the evolution of our vertical tillage family designed to eliminate yield-robbing compaction layers created by horizontal tillage tools such as plows, disks, and sweep implements. The InLine Sub-Soiler’s frame features high tensile 3/8" wall tubing for added strength and durability. It is equipped with three to eight shanks that are spaced 24" to 40" apart, and is available with two shank options: 3/4" and 1-1/4". The 3/4" no-till shank and no-till point provides maximum shatter with minimum surface disturbance. The 1-1/4" straight leg shank creates more surface disturbance for minimum tillage.

Before After

DestroyLayers

Shown with optional pull hitch

SS1300SS1700SS1800SS2000

MO

DEL

S

HEAVY-DUTY HINGES - Rein-forced large-diameter greaseable pivot pins and extra heavy steel gussets mean the wings can take as much abuse as the center section.

ADJUSTABLE GAUGE WHEEL - A screw jack makes adjusting the gauge wheels simple and easy.

AUTO RESET WITH 3/4" SPRING STEEL SHANK - Our exclusive 10" no-till point minimizes soil distur-bance while creating maximum fracture below the surface.

SHEAR BOLT WITH 1-1/4" STRAIGHT SHANK - Available with either 2" or 7" points. Will not only fracture under the surface, but will create more surface disturbance.

BERM CONDITIONER - Designed to firm the soil after density layers are reset by the Sub-Soiler shanks.

Shank Selection

Sub-Soiler 16 | 17

Berm Conditioner Attachment Features &Benefits

Shown with optional pull hitch

If your goal is to size and incorporate residue in the top 4-5" of top soil while leaving the soil level enough for a single-pass tool in the spring, the Great Plains Turbo-Chisel® is the tool of choice!

Great Plains’ exclusive 22" Turbo Coulters on 7-1/2" spacing start the process by slicing residue. The 22" blades run on a 1-3/4" gang bolt with cast spools, putting the weight “in the gang” for outstanding performance and reliability. The gang bearings are field-proven 211 rubber-mounted bearings with cast housings mounted to our heavy-duty 1" x 3" C-shank standards. The coulter bar is hydraulically adjustable for on-the-go depth control, offering the flexibility to till up to 12" deep.

Models available are 7'-15' shank rigid or 9'-23' shank folding with a recommended horsepower requirement of 30 hp per shank. Units can be equipped with either standard chisel shanks throughout, or a combination of toggle trip parabolic shanks on the front row, followed by either parabolic chisel shanks or standard chisel shanks. The heavy-duty toggle trip shank is designed to run 1-1/2" deeper than the chisel shanks on the rear bar and trips at 2,450 lbs. Rear attachment options include the choice of a “buster bar” to level and smooth the ground or our Great Plains chopper wheels to crumble clods while firming the soil.

There are other coulter chisels available on the market… but there is only one Turbo-Chisel!

Buster Bar Chopper Wheel

Attachments

TC5313, TC5315,

TC5109, TC5111,

TCN5311, TCN5313TCN5107, TCN5309,

TC5113, TC5115

TC5317, TC5319,TC5321, TC5323

MO

DEL

S

TURBO COULTER - The turbo design allows the blade flute to attack the residue vertically, providing improved cutting, penetration, and decreased hairpinning.

Shank Combinations

Turbo-Chisel® 18 | 19

TOGGLE TRIP RESET SHANK - The Heavy-Duty Toggle Trip Shank has a 2,450-pound horizontal trip force and will automatically reset when tripped.

Narrow Transport

Folding

Rigid

Features &Benefits

HybridChisel

Std. Chisel Shank Std. Chisel Shank

Hvy.-Duty Parabolic Hvy.-Duty Parabolic Med.-Duty Parabolic Hvy-Duty Parabolic

MULTIPLE SHANK COMBINATIONS- Order the Turbo-Chisel how you want it with three different shank combinations: Standard-Standard, Medium-Heavy, or Heavy-Heavy. Heavy-Duty Shanks are set to run 2" deeper when used in conjunc-tion with the medium shanks.

Every farming operation has different and diverse needs, and at times, conventional tillage equipment is the best solution. We have focused our conventional tillage line around dependability and unconventional features that make our products stand out from the competition.

Our Disk Harrows incorporate features such as hydraulic leveling, tension nuts on each end of the gang bolts, and heavy-duty C-shanks with rubber mounted cast bearings. These key features are just a few examples of benefits that provide the user with the best performing, most reliable disk in the industry.

Our secondary and finish tools include the versatile Disc-O-Vator and Field Cultivator. Both feature the Max-MixTM Shank pattern. This exclusive pattern ensures that no shank is closer than 28" on an individual bar. Soil is moved one

direction and then is returned, providing excellent residue distribution and superior herbicide incorporation.

The Disc-O-Vator also utilizes a single row of low-concavity disc blades or our exclusive Turbo Coulter. The Turbo Coulter allows the tool to operate in higher residue situations, and at higher speeds, sizing the residue for better flow through the shanks.

Our finishing tools include the Seedbed Conditioner. This tool crumbles clods and firms the seedbed, making it a perfect planting environment.

The Plains Plow is a specialty tool, aimed at wheat producing states to kill weeds while leaving the stubble on the surface.

Every Great Plains conventional tillage tool is field proven and has the reputation of being at the “top of their class”.

Conventional TillageThe “Unconventional” Way of doing

- Max-MixTM Pattern, low concave blades or Turbo Coulters, choice of magnum or heavy-duty K-Flex shank, full 24" under-frame clearance

- Max-Mix Pattern, full 24" under-frame clearance, optional floating tongue

- 4x4 heavy wall frame, low-rise blades for shallow working depth,single point depth adjustment, 4' blades for less ridging and better depth control

- Hydraulically controlled front to rear gang leveling, 6.5" ductile cast gang spools, spacing options of 7.5" and 9"

- 16" reels with 1" dia. hardened rods, one pair hydraulic hoses, 9.5Lx15 transport tires, optional hydraulic weight transfer

- The most recent addition to our conventional tillage line, these harrows are heavy duty and built to last.

Conv. Tillage Tools 20 | 21

DISC-O-VATOR

FIELD CULTIVATOR

PLAINS PLOW

DISK HARROW

SEEDBED CONDITIONER

FLEX HARROW

GANG DESIGN - Rugged gang design with con-cave or Turbo blades on 8" spacing and improved scraper design.

HITCH DESIGN - A clean, narrow-profile, self-leveling hitch design with turnbuckle height leveling adjustment.

MAX-MIXTM - The Max-Mix shank pattern increases chemical incorporation, reduces windrowing, and helps eliminate banding.

Great Plains has raised the bar with the introduction of the new 8000 Disc-O-Vator line comprised of 13 models with working widths from 15' to 52'. Four of the new models are specifically designed for narrow transport needs and can be purchased in 15' to 24' versions. Seven-inch shank spacing with 9" sweeps ensure good cutout.

In today’s farming economy, it’s all about getting more done in a day. The Great Plains Disc-O-

Vator is one of the industry’s most productive tillage tools, allowing you to combine disking, cultivating, harrowing, and herbicide incorporation … all in a single pass. Legend-ary strength is at the heart of all Disc-O-Vators with rugged frames that are engineered to flex and hug rolling terrain. The full line of options and finish-ing attachments enable you to custom build a Disc-O-Vator to fit the requirements of your operation.

Shank Selection

Disc Selection

HEAVY-DUTY MAGNUM SHANK - Performs with 205 lbs of point pressure and contains a thicker spring. Has the ability to “unhook” from obstructions, making it a good choice in rocks.

HEAVY-DUTY K-FLEX SHANK - Has a 5/8" x 3" wide upper leaf spring and 5/8" x 1-3/4" lower shank to provide 185 lbs of point pressure, giving the shank strength to penetrate and stay level at higher speeds while minimizing side play.

TURBO COULTERS - Chop residue and loosen the soil for the field cultivator shanks. Turbo gangs allow faster ground speed and increased productivity without ridging.

LOW-CONCAVITY DISC BLADES - Increases mixing action with the soil and buries more residue.

Discovator is a registered trademark of Great Plains Mfg., Inc.

Hi Residue 5-Row Spike/7-Row Spike

4-Row Coil Tine

HD 3-Bar Spike with Reel

EasyTransport

Features &Benefits

Attachments

MO

DEL

S

8315DVN, 8318DVN,8321DVN, 8324DVN

8321DV, 8324DV,8326DV, 8328DV,8333DV, 8537DV,8544DV, 8548DV,8552DVNarrow Transport

8000 Series Disc-O-Vator 22 | 23

With the introduction of the 3000 and 4000 Series Disk Harrows, Great Plains not only be-comes a full-line tillage equipment company, but provides Disk Harrows with all the key ingredients customers demand in top-of-the-line equipment. Six models, which range in cutting widths from 23' to 36' in 3-foot incre-ments, promise reliability, superior cutting ability, optimum weight per blade, and a level, finished surface.

The double offset disk harrow is still one of the most efficient ways to mechanically eliminate weeds and re-level rutted harvest fields. Like anything though, the best results come from a product that was designed for the job.

To that end, our 3 000 and 4000 series Disk Harrows feature 6-gauge or 4-gauge ˝rollable disc blades, a 20° angle on the front gangs and an 18° angle on rear gangs, spring C-shank bearing standards, and wings that flex up 14° and down 9° to handle terraces and rolling terrain. Service and reliability also receive top billing with features like 1-3/4" gang shafts capped with castle nuts on both ends for quick disas-sembly and blade or bearing replacement. Heavy-duty cast rubber-encased bearings are also standard to ensure machine dura-bility and longer service life.

DiskHarrow

SPRING-OFFSET C-SHANKS - Offset C-shanks cushion the gangs and protect the unit. The offset design maximizes the clearance between the disc blades to help prevent plugging.

SPRING-LOADED SCRAPERS - Standard scrapers are spring loaded; quickly make them rigid by tightening a bolt.

HEAVIER SPOOLS - The ductile cast spools used on the Great Plains disk are among the heaviest in the industry. At 23.55 pounds, they put more weight closer to the ground. The result is better penetration, plus longer bearing and standard life. Ductile cast spools also resist breakage and collapsing compared to steel pipe style spacers. These spools are a full 6.5" in diameter, as much as 1'' larger than some competitors. This gives more support to the center of the blade, reducing blade breakage.

DOUBLE OFFSET - Design ensures com-plete center cutout and eliminates the need for a middle breaker.

Great Plains Case IH Krause Sunflower John DeereDuctile Cast Ductile Cast Ductile Cast Welded Welded

Dia: 6.5" Dia: 6" Dia: 5.5"/6" Dia: 6.25" Dia: 6"Weight: 23.55#

Weight: 19.20#

Weight: 15.35#

Weight: 11.90#

Weight: 12.00#

Disk Harrow 24 | 25

Features &Benefits

3-Bar Spike HD 3-Bar Coil Tine

Attachments

4336DH

3323DH3326DH3329DH4330DH4333DH

MO

DEL

S

1) Plate-to-Mount Gauge Wheel 2) Maintenance-Free Pivot Points 3) Improved Caster Pivot Design 4) All 6-Bolt Hubs are Heavy 4500# (Same as Disc-O-Vator) 5) Better Balance to Handle Heavier Attachments 6) Common Turnbuckles & Gauge Wheel Assemblies 7) Modified Low-Profile Hitch 8) Convenient Hose Storage 9) Ball Joint Attachment Point at Rear of Hitch 10) Improved Shank Spacing with No Shanks Closer Than 28"

11) Improved Light Package 12) Integrated Rear Hitch Common w/Disc-O-Vator; Same for all Drag Attachments 13) Heavier Hinge Plates 14) Slot Fold System versus Rocker Bracket 15) Inside Wing Wheels have been moved further back to accommodate Floating Hitch Machines 16) Heavier Wing Wheel Arms 17) Improved Fold System 18) Heavier Hinges on Outside Wings 19) Easier Wing Wheel Adjustment20) 7" Shank Spacing Front to Rear

SHANK IMPROVEMENT - Improved shank spacing around tires and throughout the machine with no shanks closer than 28" on entire implement.

LOW-PROFILE HITCH - New low-profile hitch with heavy-duty ball joint attachment and convenient hose storage area.

FOLDING SYSTEM - Improved fold system with heavier hinges on both inside and outside wings.

3-Row Spike & Reel Hi Residue 4-Bar Spike or 5-Bar (Std.) 4-Row Coil Tine/3 Coil Tine & Reel

8000 Series Improvements19 18 17

16

13

11

8

75

4

63

21

9

10

15 14

12

8000 Series Improvements

Features &Benefits

MAX-MIX™ - The Max-Mix shank pattern increases chemical incorporation, reduces windrowing, and helps eliminate banding.

MO

DEL

S

Several changes and enhance-ments were made to the 8000 Series Field Cultivator to make a good unit even better! Shank spacing throughout the ma-chine, especially around tires, has been improved, ensuring no shanks are closer than 28". The hinges and fold system have also been “beefed up”, making folding and unfolding smoother and more reliable. Heavier 6-bolt hubs are used in all locations on all models and

the tongue is now low pro-file and “single pole” to allow tighter turns without interfer-ence with the tractor‘s 3-point hitch quick coupler. On floating hitch models, the wing wheels are moved back for better bal-ance and allow heavier harrow attachments without hav-ing negative tongue weight. Caster wheel design has been improved for better reliability and the pivot points are now maintenance free.

8323FC, 8328FC,8332FC, 8336FC,8539FC, 8544FC,8548FC, 8551FC, 8556FC, 8560FC

8000 Series Field Cultivator 26 | 27

CultivatingChange

Add a Great Plains Precision Seedbed Conditioner to your present finishing tool to prepare the perfect seedbed by firming the soil, reducing air pockets, incorporating chemicals, breaking up surface clods, knocking soil off root crowns, and preventing wind and water erosion in one pass. Create an unmatched seedbed that places the finer particles of soil in the planting zone, allowing perfect seed-to-soil contact to boost the emergence of your crop. All reel sections overlap for superior finish and no streaking. Wings flex up and down 15°, allowing the conditioner to follow the contour of the ground, providing flexibility like no other.

• Optional hydraulic weight transfer assures even weight on all sections in rolling terrain. • One hydraulic circuit controls lifting, folding, and weight transfer for ease of operation. • Hitch length adjusts to match the host machine for optimal turning radius. • Triple lip sealed bearing with 1-1/2"-round gang shafts on every section. • Heavy-duty design offers up to 150 pounds of weight per foot for increased clod and root ball breakage.

SINGLE HYDRAULIC CIRCUIT - This feature allows a simple and quick way to attach to the host machine.

HYDRAULIC WEIGHT TRANSFER - Transfer valve adjusts weight from center to wings, providing even, constant down pressure to the full width.

SPRING-CUSHIONED REELS - Provide maintenance-free pivot points.

16" DIAMETER REELS WITH 1" RODS - For higher strength and resistance to damage from stones.

2112, 2115, 2317,2320, 2322, 2325,2327, 2330, 2332,2335, 2536, 2538,2541, 2543, 2546,2548, 2551

Seedbed Conditioner 28 | 29

Features &Benefits

SeedbedPerfection

MO

DEL

S

21" TREADER WHEEL - 7" spacing is ideal for breaking clods, uprooting weeds, and preparing a seedbed. Hard faced for long life.

HEAVY-DUTY ROLLING COULTER - Features a full 20" blade with a yoke-mounted, 4-bolt hub assembly.

48" SWEEPS - Narrower-than-standard V-Blades provide more consistent depth in rolling conditions.

Time is short. Moisture is limited. You need a tillage system that enables you to cover hundreds of acres while carefully managing residue conditions. Our 3-, 5-, and 7-section Plains Plows are engineered to withstand the punishment of demanding field conditions while effectively managing surface residue.In addition, the Plains Plow

takes field efficiency to the next level when you select our optional hard pan Ripper Shanks. These optional shanks enable you to perform multiple field operations in a single pass…truly taking your productivity and fuel savings to the next level. Models 9533PP and 9540PP are available with optional 250# wing weights.

4-1/2" SHALLOW PITCH BLADES - The standard shallow pitch 4-1/2"blades allow shallow tillage andfinishing with minimum ridging and lower horsepower requirements. This blade is recommended if higher tillage speeds and shallower tillagedepths are desired.

6-1/2" HIGH PITCH BLADES - The optional 6-1/2" blade offers additional lifting of the soil for greater weed kill along with more wearing surface to increase the life of the blade.

Features &Benefits

Undercuttingat its BEST!

Sweep Selection

MO

DEL

S 9322PP, 9326PP,9533PP, 9540PP,9744PP, 9748PP,9752PP, 9756PP

Plains Plow 30 | 31

The Great Plains Heavy-Duty Flex Harrow is the toughest finishing tool on the market! We use a triangle design with a full-length tongue, height-adjustable hitch, and doubled-up bridge frame for rigidity. The center frame is all 1/4" wall steel, making it perfect for nearly any terrain. The wings are constructed of 6" square tubing with reinforced corners. For longer life and wear, our 1-1/2" pivot pins are featured on the main pivot and wing corners. Extra-large cylinders with single valve control provide

lifting and folding power – even in heavy residue. Cable lift is automatic – no need to get off the tractor to adjust. The main hubs are 8-bolt, 4500# with 12.5Lx15 transport tires. Wing tires are no-puncture aircraft tires for longer stability and reliability. Available as a 16 bar, 12 bar, or 8 bar.

When looking for the ideal “clod busting” finishing tool, the Great Plains HD Flex Harrow is the perfect finisher. Its pulling strength and simplicity are unmatched!

TRANSPORT TIRES – Extra heavy 8-bolt transport hubs and wheels. Six-bolt wing hubs and wheel with bolt in spindles for more tire stability and reliability.

TONGUE – Adjustable hitch heights. Tongue or clevis hitch help maintain level profile and optimal hitch height.

FORGE HARDENED – Six-inch spike teeth on 9" spacing for longer lasting wear.

FOLD HINGE – Super heavy, greaseable wing pivot joints and frame pivots for longer lasting wear at the 1-1/2" pivot pins.

Features &Benefits

SmoothFinish

MO

DEL

S FH6424HDFH6630HDFH6636HDFH6642HDFH6845HDFH6848HDFH6851HD

Flex Harrow 32 | 33

Finish

OurMission

To Be a Company Where Innovation, Teamwork and a Desire to Improve Combine to:• Delight Our Customers• Provide a Rewarding Workplace for our Employees• Generate Profits for Stability and Growth

Founded in 1976 by President and Owner Roy Applequist, Great Plains Manufacturing employs more than 1,300 people in eight Central Kansas communities and Sleaford, England. In addition to its domestic ag equipment division, which manufactures seedbed preparation, nutrient placement, and seeding equipment, Great Plains Manufacturing also includes Great Plains

International, Great Plains Trucking, Great Plains Acceptance Corporation, and its Land Pride Division that manufactures grounds maintenance tools such as mowers, tillers, rotary cutters, and snow removal equipment. The company is one of the largest and fastest growing family-owned “short line” implement companies in the United States.

As agricultural producers, we’re all aware of the increasing pressure to produce more with less. The demand for higher efficiency and increasing produc-tivity on the farm has never been greater. At Great Plains, we listen closely to our customers. We work as a team, continually breaking new ground and in-novating new products that position your operation to profit in a changing agricultural environment.

I would like to personally thank you for considering our broad line of Agricultural Products. We look forward to putting our innovation to work in your operation.

Roy ApplequistOwner,Great Plains Mfg., Inc.

“Setting the pace through innovation.”

GREAT PLAINS

Great Plains Manufacturing, Incorporated • 1525 E. North Street • P.O. Box 5060 • Salina, KS 67402-5060PHONE: 1-800-255-0132 • FAX: 785-822-5600 • www.greatplainsmfg.com

Corporate Info 34 | 35

SALINA CAMPUSSALINA, KS

CORPORATE OFFICESALINA, KS

PRODUCT DEVELOPMENTSALINA, KS

LUCAS PLANTLUCAS, KS

KIPP PLANTKIPP, KS

ENTERPRISE PLANTENTERPRISE, KS

ABILENE PLANTABILENE, KS

SIMBA PLANTSLEAFORD, UK

TIPTON PLANTTIPTON, KS

ELLSWORTH PLANTELLSWORTH, KS

PRODUCT DEVELOPMENTASSARIA, KS

“Setting the pace through innovation.”

TRUCKING DIVISIONSALINA, KS

www.gpacfinance.com

Great Plains Acceptance Corporation is an Ag-based lender committed to growth

in the Ag industry by offering sound, tailored finance options to potential or

existing customers. Quick approvals, competitive rates, and flexible terms are all

available through Great Plains and Land Pride dealers.

Great Plains reserves the right to vary specifications with or without notice at such times in such manner as deemed appropriate. Major as well as minor changes may be involved. Every effort, however, is made to ensure the accuracy of the particulars contained in this brochure. Consult your dealer for details regarding the specifica-

tions of any product. All sales are made by the Distributor or Dealer subject to and with the benefit of the standard conditions of Sale and Warranty provided by the Distributor or Dealer, copies of which may be obtained upon request.

Make Ownershipa Reality

©GREAT PLAINS MFG., INC. 1030-GPM