WELCOME

K.K.WAGH COLLEGE OF AGRICULTURE, NASHIK

Seed Production of Sorghum

Presented byPravin K. Shinde

Guided byProf. Sonawane S. S.

Seminar on

Department of Agronomy

Sorghum ( Open pollinated varieties ) Botanical name – Sorghum bicolor Family- Gramineae Origin-Tropical & Subtropical region of Africa & Asia Sorghum is used for grain, fiber&fodder.

One of the most important staple food for million poor rural people.

Sorghum is about 70% starch ,so is good energy source.It’s starch consist of 70 to 80 % amylopectin.

In rank first sorghum production by country U.S. (10,988.00 MT) in world & India in rank fifth(5,000,00 MT) in world.

INTRODUCTION

Land selected for sorghum seed production should have good drainage facility so as to avoid water stagnation.

Previous crop in the land should not be of any other variety of sorghum.

Land should be used sandy loam & well drained soil.

Land Requirement:

Sorghum is an often crops pollinated crop having 50% cross pollination. Isolation distance should be maintained so as to avoid varietal contamination of seed.

Isolation distance is the distance by which the seed crop is separated from any other variety of the same crop.

Contaminants Isolation Distance (M)

Foundation seed

Certified seed

Other varieties 200 100

Sudan grass 400 400

Fodder sorghum 400 400

ISOLATION DISTANCE:

Though sorghum is grown as rain fed as well as irrigated crop in different seasons, appropriate season to produce good quality seeds is important.

For quality seed production, dry and cool weather is more favourable than hot and humid weather during panicle emergence and seed development stage.

For seed production, sowing may be done during June – July and October – November seasons. Of these, October   - November is more conductive for quality seed production.

CLIMATE:

SEED SOWING:

Seeds are soaked in 2% potassium dehydrogenase phosphate solution for 10 hours and then dried back to original moisture

One kg of seeds are to be soaked in 600 ml of leaf extract for 16 hours. Hardened seeds will have the ability to withstand drought during germination and plant growth.

 

SEED TREATMENT:

Good quality seeds should be used to maintain the required crop stand.

For of land, 12 to15 kg of seed is required.  For certified seed production, foundation seed should be sown.

Seeds with low germination will also be less vigorous and hence crop growth is very much reduced. Seeds affected by sugary diseases should be removed.

SEED SELECTION:

After the basal application of above fertilizers, ridges of six metre length are formed at 45 cm distance.

Seeds are sown with a spacing of 15 cm on one side of the ridge

After the application of 12.5 tonnes of FYM, plough the field 1 to 2 times by harrowing 2 to 3 times&levelling.

Then apply 2 kg of Azospirillum uniformly.

FIELD PREPARATION AND SEED SOWING:

FORMATION OF RIDGES AND FURROWS:

Micronutrient

For zinc deficient and iron deficient soils, 25 kg of ZnSO4 and 50 kg of FeSO4 have to be applied respectively

N (kg/ha) P (kg/ha) K (kg/ha)

Basal application

50 50 50

25 days after sowing

25 _ _

45 days after sowing

25 _ _

After furrow formation, fertilizer should be applied uniformly in the furrow.

FERTILIZER APPLICATION:

According to the soil condition, irrigation is given once in 7 days or once in 10 days. The following are the important stages in which drought should be avoided.

Panicle emergence stage Flowering stage Seed maturation stage

IRRIGATION MANAGEMENT:

a) Weed Management: Hoeing and Weeding is necessary for controlling of weed.Weed are also controlled by spraying of 1kg Atrazine(in 700lit of water)ha after 2-3 day of sowing.

b) Disease Control:Disease plant should be control Sugary disease of jawor.Spraying of 0.2% Zineb should be spray after 45 days of sowing.

C) Insect control:15 kg Thimet ha should be apply in furrow with fertilizer (not with seed) at time of sowing for contolled Shoot fly .One spray 1.5 kg Thidon/ha(in 700lit water) should be at 10 to 15 days after germination for controlling Stem borer.

PLANT PROTECTION:

Growth stages Off-types

Before flowering Self sown crop plants with different leaf colour, shape and stem colour

During flowering Early or late flowering plants and plants with deviant panicle shape

Before harvest Panicle affects by ergot, fungi and smut and plants with deviating panicle features

ROUGING OF OFF TYPES IN QUALITY SEED PRODUCTION:

Sorghum crop should be harvested from 40-45 days after 50% flowering.

At this stage, moisture content will be around 20-22 per cent, seeds will have black layer at the basal portion.

Seed weight, germination and vigour would also be high. The seeds harvested before harvestable maturity are immature and will shrink upon drying.

HARVESTING :

The harvested ear heads should be dried to bring down the seed moisture content to 15-18 per cent.

If the seed moisture is below 15% then, seed injury may occur cracking and above 18% moisture then will be occurrence of crushing injuries.

These mechanical injuries may affect the germination and vigour of the seed besides paying way for fungal infection.

Seed are dried in sunshine heat.

Harvested Seeds are to be dried to a moisture content of 10-12 per can

Seed yield of 2000 kg/ ha can be harvested.

SEED YIELD:

EAR HEAD THRESHING :

DRYING:

Seed processing is an operation by which all immature, wrinkled, broken and small seeds as well as all physical impurities such as sand, stones, dust, other crop sees and week seeds are removed.

For processing sorghum seeds, sieve of 9/64" diameter can be used so as to get uniform size seeds.

SEED PROCESSING:

SEED TREATMENT: Seed treat to use a safe and non-poisonous chemicals

like Halogen mixture is recommended for treating sorghum seeds @ 3 g /kg of seeds.

Halogen mixture can be prepared by mixing bleaching power (calcium oxy-chloride) + calcium carbonate + agape leaf powder (Albizzia amara) 5:4:1 proportion respectively.

Always, new bags have to be used for packing the seeds.

Seeds are hygoroscopic in nature which means they have the tendency to absorb moisture from the atmosphere

, seeds stored in cloth or gunny bags, loose viability fast. In such places, moisture vapour proof containers like polythene (700 guage thickness) bags can be used.

Storage godown has to be thoroughly cleaned before storing seeds

STORAGE METHODS:

Seed Moisture should be lowered below 8%, when the seeds are stored in moisture vapour poof container.

Direct contact of seed bags with the floor or wall is to be avoided.

Seed bags should be stacked above the wooden pallet.

While stacking, number of bags per row should not exceed 8, otherwise seeds in the lower bag will deteriorate due to pressure

STORAGE CARE:

Seed certification guarantees the quality of seed as it ensures that the certified seed.

genetic, physical, physiological and seed health qualities.

It starts from verifying whether seeds were obtained from authenticated source, verification of isolation distance and inspection during plant growth, flowering, harvesting, processing and bagging.

SEED CERTIFICATION:

seed sample sent to seed testing lab to test physical purity and germination.

Then certification tag is issued. Colour of the tag is blue for certified seeds.

seed are certified by the Certification Agency.

Seed details nearer seed certification office may be contacted.

Cont.

Seed science & Technology www.tanau.ac.in

Text book of seed technology Authors: C.N.Chore & S.R.Ghadekar

Seed technology Authore: A.C.Agrawal

REVIEW OF LITERATURE:

THANK YOU