Security Systems BU Communication Systems ST/SEU-CO 1 DCN MCCU IO Maintenance 09.12.2004 Select...
-
Upload
alexander-weaver -
Category
Documents
-
view
212 -
download
0
Transcript of Security Systems BU Communication Systems ST/SEU-CO 1 DCN MCCU IO Maintenance 09.12.2004 Select...
Security Systems BU Communication Systems
DCN MCCU IO Maintenance09.12.2004 ST/SEU-CO 1
Select settings in Maintenance Menu
Default language for the delegate/chairman’s unit LC-Displays Assign ‘Stand-alone’ intercom operator.
I&O Manual
Security Systems BU Communication Systems
DCN MCCU IO Maintenance09.12.2004 ST/SEU-CO 2
Language setting in Maintenance Menu
Language for the delegate/chairman’s unit LC-Display The 6 default fixed languages in a stand-alone a system available
are displayed as follows: English, German, French, Italian, Spanish, Dutch
Optional as 6 languages with PC-Control: 6 of total 20 English, German, French, Italian, Spanish, Dutch,
Portuguese, Catalan, Finnish, Latvian, Swedish, Japanese, Czech, Russian, Chinese (Simplified), Chinese (Traditional), Lithuanian, Slovenian, Polish, Slovak
Notes: The DCN PC software will terminate if the Maintenance mode is selected.
Security Systems BU Communication Systems
DCN MCCU IO Maintenance09.12.2004 ST/SEU-CO 3
Intercom setting in Maintenance Menu
Assign ‘Stand-alone’ intercom operator. Only one Unit can be set with the intercom operator function. All units equipped with a hand-set can be set as the intercom
operator
Notes: Once the ‘Intercom operators’ position has been set, no
further indication is given The default system intercom operators position will only take
effect when the CCU reverts back to the congress operational mode.
Security Systems BU Communication Systems
DCN MCCU IO Maintenance09.12.2004 ST/SEU-CO 4
Select settings in Maintenance Menu
End of section
Robert Bosch GmbH
All rights are reserved. Reproduction or passing on to
third parties in whole or in parts is prohibited without the
written consent of the copyright owner.