Section_1 - Piping

1PPIPING PRODUCTS

SE

CTIO

N 1

Pip

ing P

roducts

When it comes to isolating or testing piping - “We’re it”! We have the largest inventory available for both rental and sale. Our inventory consists of close

to 1 Million Pounds of Blind Flanges, Isolation, and Hydro test Paddle Blinds available for immediate delivery, and include the following: Flange Sizes 1/2” to 66” with flange ratings of

150# to 2,500#. Flange Weld Test Plugs available for rental or sale in any size and rating less than 24”. Other Products include: Industrial Isolation Plugs,

Grip-Type, Plumbers-Type and Inflatable Plugs. We also offer Beveling Machines, Flanges, Bolts and Gaskets.

(713) 941-3797 Toll-Free: 800-456-8721

www.USAIndustr ies .comIN STOCK - SHIPS TODAY

2P

SE

CTIO

N 1

Pip

ing P

roducts

ISOLATION & TESTING BLINDS

Blind Flanges

USA Industries provides Blind Flanges for both purchase and rentalmeeting SA105 (Carbon Steel) specifications.

Available in Line Sizes from 1/2” to 96” and Flange Ratings from 150# -10,000#. In both Raised Face or Ring Tongue Joint gasket surfaces, ourblinds are provided for either Series A (MSS SP44) or Series B (API605) Flanges, meeting ASME/ANSI B16.5 and B16.47 specifications.

All other Blind Specifications A182, A350, B160, etc. can be providedupon request for purchase.

Paddle Blinds — Isolation & Hydrotest Thickness See Chart — use our standard thickness or Specify your own!

MASSIVE INVENTORY More than 500,000 Pounds of Blinds available for Delivery USA Industries is the largest manufactur-er of Paddle Blinds in both Isolation and Hydro Test thicknesses.Our huge inventory consists of 516 — Gr70 Spec Carbon Steel material made to ASME/ANSI B16.5 & B16.4 standards.We take pride in the quality of the blinds we provide. Every piece we ship, whether for Rental orPurchase, is ground to a smooth edge finish, stamped, freshly painted and *color coded for easyidentification. Available in Raised Face, Mill or Serrated Finish - Ring Tongue Joint, Oval or Octagonal, Male or Femaleconfigurations.• Flange sizes 1/2” - 96”• Flange ratings 150 - 2500# • 125-250 RMS Serrated Finishes or Mill Finish Available • Ring Tongue Joint - Male or Female - Oval or Octagonal • Stamped with Size & Rating • Ground to provide smooth edges • Q/A & Q/C: Manufactured under our

strict Quality Assurance Program • In-Stock orders shipped same day

HANDLE COLORS150# Red 300# Blue 600# Yellow900# Green 1500# White 2500# Orange

When Ordering Specify: Additionally:• Flange Rating • Gasket Types • Line Size & Quantities• Material • Bolt & Nut • Vent Ports & Sizes Quantities

(If required) • Quantity • Delivery Date

When Ordering Specify: • Flange Rating • Line Size • Mill or Serrated Face • Thickness (Isolation,

Hydro, or Custom) • Handle Type

(If necessary) • Material • Quantity • Delivery Date

Additionally: • Gasket Types

& Quantities • Bolt & Nut

Quantities

3P

SE

CTIO

N 1

Pip

ing P

roducts

HANDLE COLORS150# Red 300# Blue 600# Yellow900# Green 1500# White 2500# Orange

(713) 941-3797 Toll-Free: 800-456-8721


When Ordering Specify:

• Line Size• Flange Rating• Quantity • Thickness

Line sizes up to 96” Available.Standard isolation thickness is 5/16” (+/- 1/16),any thickness available upon request.

4P

SE

CTIO

N 1

Pip

ing P

roducts

Spectacle Blinds

We have a large inventory of Spectacle Blinds and Spacers in 516-Gr70 Carbon Steel, 304, and 316Stainless Steel provided with either a Mill or Serrated Finish. All of our Spectacle Blinds are ground to asmooth edge finish and stamped with the flange rating & line size. The Carbon Steel Blinds are paintedflat black and color coded on the Tie bar based on the flange rating.

• Flange sizes 1/2” - 96”• Flange ratings 150 - 2500# • 125-250 RMS Serrated Finishes or Mill Finish Available • Ring Tongue Joint - Male or Female - Oval or Octagonal • Stamped with Size & Rating • Ground to provide smooth edges • Q/A & Q/C: Manufactured under our strict Quality

Assurance Program • In-Stock orders shipped same day • Can be built to your customized specifications

When Ordering Specify: Additionally: • Flange Rating • Gasket Types • Line Size & Quantities • Mill or Serrated Face • Bolt & Nut• Material Quantities• Quantity • Delivery Date

5P

SE

CTIO

N 1

Pip

ing P

roducts

E-Z Purge Slip Blinds

For line purging applications, past practice has been to use a slip blind and number of spacers sand-wiched between the blind and the gapped flange. While this procedure can effectively be used to create a purging area, a number of problems exist which can lead to unsafe practices and/or damage to equipment.

USA Industries new E-Z Purge blinds can help eliminate all of those problems. Our Purge Blinds are easily identifiable and can be made to any specifications requested. The current standard we use is a1/2” thick 516 Gr70 slip blind with a 1/4” deep channel milledat either 3/4”, 1”, or 11/2” widths depending on the blind size.

The ratio of gasket area versus purge area is approximately50% to allow for proper sealing force distribution.Custom configurations available to suit your specific purge flow requirements.

• Any Flange size & rating • Unique handle identifies it as a Purge Blind • Painted flat black • Color coded Handle • Stamped with Size & Rating • Q/A & Q/C - Manufactured under our strict

Quality Assurance Program • In-Stock orders shipped same day • Available in Ring Tongue Joint

See Paddle Blind Chart for size reference - Page 3P

(713) 941-3797 Toll-Free: 800-456-8721


USA Industries is available to meet all your Piping Isolation requirements.

If you don’t see what you need in our catalog, please contact us.

We are available to help you when you need us 24/7

In addition, Ask Us about ourHeat Exchanger, Condenser & Boiler Tools

Tube Plugs and Flow Measurement Products

When Ordering Specify: Additionally: • Flange Rating • Gasket Types • Line Size & Quantities• Mill or Serrated Face • Bolt & Nut• Material Quantities • Quantity • Delivery Date

6P

SE

CTIO

N 1

Pip

ing P

roducts

Our Flange Weld Test Plugs are designed for fast, simple installation. Insert the plug into the pipe tobe welded, bolt the flanges together and tighten the large compression nut(s) to expand the seal —

It’s that Simple!The flange to pipe weld is ready to be tested. A complete test requires a minimum amount

of water — from a few cups to a few gallons, depending on the line size —virtually eliminating your hazardous waste disposal costs.

• Fast, safe and easy installation and testing

• Reduces Testing, Downtime, Waste Disposal costs

• Line sizes from 3/4” to 24” stocked

• Flange ratings: 150# - 2500# • Available in Raised-Face or

Ring-tongue joint Flanges

• Seals - New Chemistry - easier to seal against Pitted Pipes - color coded for line schedule

• Seal and compression ring sets are easily changed to accommo-date different pipe schedules - segmented compression tube allows adjustment of seal installation depth

• Testing pressures meeting ANSI B16.5 requirements

• Rugged, heavy duty construction • Q/A & Q/C - Manufactured under

our strict Quality Assurance Program

• In-Stock - ships same day

A SPECIAL WORD OF CAUTION: Pressure testing can bean extremely hazardous operation and safety precautionsshould be strictly adhered to. All connections, valves,flanges and other fittings should be checked for suitabilityto test pressure. Verify the line ID & Plug Range match.Most importantly - Never stand or pass in front of any testplug or other enclosure while test is in progress. If plugdischarges during a test, serious injury or death couldoccur.

Flange Weld Test PlugsClear, Purge, Weld and Test with USA’s superior Flange Weld Test Plugs

Largest Rental Fleet Available

USA Industries Flange Test Plugs reduce expense, downtime delays and waste disposal problems associated with conventional flange testing.

Waste Disposal is Reduced to just a few gallons of water at most.

When Ordering Specify: Additionally: • Flange Rating • Gasket Types • Line Size • Quantity • Pipe Schedule • Gasket Type • Quantity • Rental or Purchase • Delivery Date

7P

SE

CTIO

N 1

Pip

ing P

roducts

The test plugs are held in place by the steel grips while the Neoprene seals - All by tightening one compression nut!

Provided in Isolate & Test sections of piping without the need of Flanges! The standard Plugs can be usedfor test pressures up to 3,000 psig, in line sizes from 1/2” to 26” and Schedules 40 or 80 pipe. Other sizesand test pressures available.

• Flangeless Hydro-testing of pipe• Test pressures to 3,000 psig - 5,000 psig available for Special Orders• Hardened and plated parts - inhibits corrosion• Manufactured under our strict Quality Assurance Program

C

1

234

5

6

B

A

Grip Type High Pressure

A SPECIALWORD OF CAU-TION: Pressuretesting can bean extremelyhazardous oper-ation and safetyprecautionsshould be strict-ly adhered to.All connections,valves, flangesand other fit-tings should bechecked forsuitability to testpressure. Verifythe line ID &Plug Rangematch. A safetygag and barriershould beinstalled to pre-vent accidentaldischarge ofplug at all times.Most important-ly - Never standor pass in frontof any test plugor other enclo-sure while testis in progress. Ifplug dischargesduring a test,serious injury ordeath couldoccur.

(713) 941-3797 Toll-Free: 800-456-8721


8P

SE

CTIO

N 1

Pip

ing P

roducts

Wing Nut Isolation Plugs

“Foreman” Isolation Plugs

Plumber’s Type Plugs - These plugs use Neoprene sealswith die cast bodies and are available in line sizes from 2”through 12”. Rated back pressure up to 13 psig. Availablewith or without upstream venting capabilities.

Single bolt low pressure Isolation Type Plugs - Theseplugs use Neoprene seals with Aluminum die castbodies and are available in line sizes from 4” through48”. Rated back pressure up to 13 psig. Availablewith or without upstream venting capabilities.

Provides rugged, simple and safe Isolation

and Testing8” and Smaller10” and Larger

Our unique seals are capable of expansions exceeding 1” with minimum torque. To use, simply install into the open end of the pipe or tube and tighten the compression nut(s) to expand the seal element. Rated backpressures up to 250#.

With the Bolt Type Medium Pressure Isolation Plug, you get the following features:

• Available in Standard, Extended Insertion, or Double Block (& Bleed)

Configurations• Heavy-Duty Construction -

Corrosion resistant finish - Stainless Steel Parts available

• Maintenance Free

• Manufactured under our strict Quality Assurance Program

• Urethane seals - New Chemistry- easier to seal against Pitted Pipes - color coded for line schedule

• Can be provided for any pipe size• Large Stock• In-stock - ships same day

When Ordering Specify: • Line Size• Pipe Schedule• Quantity• Rental or Purchase• Delivery Date

When Ordering Specify:• Size• Pipe Schedule • Quantity • Rental or Purchase • Delivery Date

When Ordering Specify:• Size• Pipe Schedule • Quantity • Rental or Purchase • Delivery Date

Heavy Duty Industrial Isolation Plugs

Extended Reach Double Block and Bleed Standard Isolation

(See Note Bottom Page 9P)



9P

SE

CTIO

N 1

Pip

ing P

roducts

MP Isolation Plugs

Using Neoprene seals and aluminum bodies - these are lightweight anddurable. The sealing can be provided with Mechanical (Rim Bolts) orInflatable seals and are available in sizes from 4” through 72”. Ratedback pressure up to 22 psig. Available with or without upstream ventingcapabilities.

Like the LP Series, the seals are Neoprene and the body is aluminumand are available with Mechanical (Rim Bolts) or Inflatable seals.Available in line sizes from 4” through 36”, with rated back pressure upto 105 psig. And lines sizes from 36” through 54” with rated back pres-sure up to 105 psig. Available with or without upstream venting capabili-ties. Specify Rim-Bolt Type Seal or Fluid Expansion Seal.

Balloon Plugs

A SPECIAL WORD OF CAUTION: Pressure testing can be an extremely hazardous operation and safety precautionsshould be strictly adhered to. All connections, valves, flanges and other fittings should be checked for suitability to test pressure. Verify the line ID & Plug Range match. A safety gag and barrier should be installed to prevent accidental discharge of plug at all times. Most importantly - Never stand or pass in front of any test plug or otherenclosure while test is in progress. If plug discharges during a test, serious injury or death could occur.

LP Isolation Plugs

(713) 941-3797 Toll-Free: 800-456-8721


When Ordering Specify:• Size • Pipe Schedule • Rim Bolt or Inflatable Seals • Quantity • Rental or Purchase • Delivery Date

When Ordering Specify:• Size • Pipe Schedule • Rim Bolt or Inflatable Seals • Quantity • Rental or Purchase • Delivery Date

Balloon Plugs are for isolating piping in lines 1.5” through 66”.The plugs are available with flow-through vents so upstreampressure can be vented. Back pressure up to 22 psig. Availablewith or without upstream venting capabilities.

When Ordering Specify:• Line Size • Pipe Schedule• Quantity • Rental or Purchase• Delivery Date

(See Note At Bottom Of Page.)



10P

SE

CTIO

N 1

Pip

ing P

roducts

(713) 941-3797 Toll-Free: 800-456-8721

www.USAIndustr ies .com

Bleed Rings

Stocked materials include 516 - Gr70, LF-2, 304 & 316 Stainless Steel. Available with Threaded orSocket-Weld connections and either Raised-Face (125 - 250 RMS) or Ring Tongue Joint - Male orFemale, Oval or Octagonal - gasket types. Any other material available upon request.

Raised Face and Ring Tongue Joint dimensions and tolerances are manufactured meeting ASME/ANSI B16.5 and B16.20 specifications. For Ring Joints Female oval ring grooves are standard,Male joints available. USA Industries provides one 1/2” or 3/4”, threaded or socket-weld tap. Multiple tapscan be provided but must be orientated by customer. Thickness of ring may be affected if larger taps arerequested.

One coat of Flat Black Lacquer is applied to all carbon steel plate products unless specified differently.

When Ordering Specify:• Flange Rating• Line Size • Material • Gasket Surface Type• Number, Size, & Type of Bleed

Holes - Threaded or Socket-Weld• Quantity• Delivery Date

IN STOCK - SHIPS TODAY

11P

SE

CTIO

N 1

Pip

ing P

roducts

Bleeder Cleaner

Bleeder cleaners (aka rod-out device, orifice tap cleaner or tap reamer) allow clogged bleed, drain, vent and instrument tap valves to be cleaned during normal operations SAFELY and EFFICIENTLYwhile completely containing the product. Properly using our tool eliminates the possibility of dangerousproduct releases which can result in your personnel and others being exposed to unsafe and hazardousconditions. Our Bleeder Cleaners are rated up to 700˚ F and 1,000 PSIG and are available in Four Model Types.

Simple to use: Screw the end connector onto the item needing cleaning, close the bleed valve, open theprocess valve, insert the shaft while rotating the handle. After the line has been cleared fully back out theshaft, close the process valve, open the bleed valve and disconnect the tool... SAFELY CLEANED LINE!

90 Degree Tool 135 Degree Tool Straight Tool Flexible Shaft Tool(Sight Glass Cleaner)

All components supplied conform to ANSI, ASME, ASTM and ISO-9002 Standards for Dimensions & MOC.

Cutting Blades (Bits)For Beveling Machines

Our bits are made of the highest quality tool steel and provide exceptional wear resistance and designedfor Internal or External Beveling, Facing, or Weld Removal.

Internal Bevel Flat Facing Bevel External Bevel

When Ordering Specify:• Length of Shaft “L” (standard Length is 14”)• Cleaning depth required• Type of Tool needed (Straight, 90, 135, or

flexible shaft)• Quantity• Delivery Date

When Ordering Specify:• Bit Type(s)• Quantity• Delivery Date

BM-IB-Bit BM-FF-Bit BM-EB-Bit

12P

SE

CTIO

N 1

Pip

ing P

roducts

USA Boiler Standard A very popular versatile machine that is robust and extremely powerful.Used in many industries, but commonly found in tough Petrochemical plant environments. Electric version available or a conversion kit easily changes pneumatic to electric.Range: 1” - 3” IDFunctions: Weld Removal, Beveling, Facing, Counter-boring, Tube or Pipe PrepMaterials: Any kind of steelPower: Pneumatic or Electric

Available Bits for Internal and External Beveling (37 1/2 degrees) or Flat Facing.Others available upon request.

See Page 11P for Cutting Bits.

USA Superboiler T5A powerful machine able to produce fast accurate weld preps on anyschedule and material of pipe effortlessly. Optional extras include, flangefacing attachment.Range: 2” - 8” IDFunctions: Weld Removal, Beveling, Facing, Counter-boring, Pipe PrepMaterials: Any kind of steelPower: Pneumatic or Electric

Available Bits for Internal and External Beveling (37 1/2 degrees) or Flat Facing. Others available upon request.

See Page 11P for Cutting Bits.

Portable and easy to use.



BEVELING MACHINES

USA MiniThe USA MINI machine is a lightweight yet powerful pipe beveller. A favorite inareas such as power station and Petrochemical plant shut-down work, due to its ease of set-up and speed of operation. This unit is available with the unique“auto-lock” function, to set the jaws just flip the switch — it’s that simple!Range: .78” - 1.65” ID Standard (reduced shaft option from .49” to .82” ID)Functions: Weld Removal, Beveling, Facing, Counter-boring, Tube or Pipe PrepMaterials: Any kind of steelPower: Pneumatic or Electric

Available Bits for Internal and External Beveling (37 1/2 degrees) or Flat Facing.Others available upon request.See Page 11P for Cutting Bits.

All units are supplied complete with all gripping segments to cover the full range of themachine as well as service tools, drawings, instruction manual and warranty certificate.Each machine is supplied with a protective metal carrying case.

13P

SE

CTIO

N 1

Pip

ing P

roducts

FLANGES, BOLTS & GASKETS

Flanges

Slip On Raised Face Slip On Ring Tongue Joint

Weld Neck Raised Face Weld Neck Ring Tongue Joint

We can provide flanges meeting any and all ANSI/ASME codes or specifications, in either ferrous or non-ferrous materials. Our specialty is Stainless Steel. Raised Face Weld Neck; Raised-Face Slip on;Ring Tongue Joint Weld-Neck; Ring Tongue Joint Slip on, etc.

Bolts & Gaskets

We offer flange bolts and gaskets meeting ANSI/ASME specifications.

Bolts - standard bolts are B-7 threads with 2-H nuts.

Gaskets - 1/16” & 1/8” Thick non-asbestos and spiral wound gaskets.

(713) 941-3797 Toll-Free: 800-456-8721


When Ordering Specify:• Flange Rating • Line Size• Material • Gasket Surface• Quantity• Delivery Date

When Ordering Specify:• Flange Rating• Line Size• Bolt Length• Gasket Type• Quantity• Delivery Date

14P

SE

CTIO

N 1

Pip

ing P

roducts

(713) 941-3797 Toll-Free: 800-456-8721


Section_1 - Piping

Documents

Transcript of Section_1 - Piping