SECTION INDEX A · 2016. 6. 3. · hinge-fit pty ltd 2001 a.01 177 – 179 grange rd fairfield vic....

H

ING

E-F

IT P

TY

LT

D

2001

A.01

177 – 179 GRANGE RD FAIRFIELD VIC. 3078 PHONE 03 9499 2833 FAX 03 9499 2967

ALL SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

SECTION INDEX

SECTION TITLE DETAILS

1 HINGES BACK FLAP, BUTT CABINET & BOX CONCEALED, CONTINUOUS GLASS DOOR, GRAVITY HIRLINE LIFT-OFF, PIVOT

2 SHOPFITTINGS PEGBOARD HOOKS / HANGING RAIL BRACKETS STRIPPING & BRACKETS

3 TOILET PARTITION FITTINGS, GRAVITY HINGE / KITS TOILET PARTITION KITS / NOVO RANGE

4 HARDWARE BLACK CASE & BOX METAL INDUSTRY ACCESSORIES

5 CASTORS INDUSTRIAL NON-MARKING

6 MISCELLANEOUS BRACKETS, BOLTS CHROME TUBE DOOR STOPS FLASHINGS HASP & STAPLES HAT & COAT HOOKS, HOOKS METAL LEGS PLASTIC MOULDINGS SANDING BELTS & PAPER SHELF SUPPORTS STAYS TAPE

7 CABINET FITTINGS CATCHES & LATCHES, COMPACT DISC RACK COMPUTER ACCESSORIES EDGINGS & INSERTS LOCKS

8 DRAWER SLIDES BALL BEARING, FULL EXTENSION, SINGLE EXTENSION

9 KNOBS & HANDLES BOW, BRASS, CHROME, COVER BUTTONS CYLINDER, D PULLS DOOR HANDLES, FLUSH PULLS, HOODED PULLS RING PULLS STAINLESS STEEL TIMBER

0 FASTENERS ANCHORS, BOLTS CONNECTORS DRILL BITS NAILS, NUTS, RIVETS SCREWS SILICONE / SEALANT STAPLES

H

ING

E-F

IT P

TY

LT

D

2001

A.02



TRADING TERMS & CONDITIONS

DELIVERY & PACKING: DELIVERY ARRANGED ANYWHERE IN AUSTRALIA DELIVERY CHARGE WILL APPLY CUSTOM PRODUCTS & PRODUCTS OVER 2.5 MTRS IN LENGTH MAYBE SUBJECT TO AN EXTRA CHARGE.

PAYMENT TERMS: ACCOUNT CUSTOMERS: IF NOT OTHERWISE STATED ON INVOICE – NETT 30 DAYS IF TERMS ARE NOT ADHERED TO, DESPATCH OF GOODS COULD BE WITHHELD. C.O.D CUSTOMERS: WE ACCEPT VISA, MASTERCARD, BANKCARD AND EFTPOS CARDS.

PRICES: ALL GOODS INVOICED AT PRICES RULING AT DATE OF DESPATCH. PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.

TITLE: OWNERSHIP OF MATERIAL/S SUPPLIED BY HINGE-FIT PTY LTD WILL ONLY BE TRANSFERRED TO THE PURCHASER WHEN FULL CLEARED PAYMENT IS RECEIVED.

MINIMUM ORDER: $100 PER ORDER PRE TAX. ORDERS UNDER $100 MAY BE SUBJECT TO A SMALL ORDER CHARGE.

BACK ORDERS: UNLESS OTHERWISE STATED, ORDERS RECEIVED ON “OUT OF STOCK” LINES WILL BE HELD ON BACK ORDER FOR A MAXIMUM PERIOD OF 30 DAYS.

SPECIAL ORDERS: “SPECIALS”, COVING AND CUSTOM MADE GOODS MADE TO BUYERS SPECIFICATIONS ARE NOT RETURNABLE. CUSTOM MADE ORDERS MUST BE IN WRITING.

CLAIMS: CLAIMS MUST BE MADE IN WRITING WITHIN 7 WORKING DAYS FROM DATE OF INVOICE. NO GOODS WILL BE ACCEPTED FOR RETURN WITHOUT PRIOR WRITTEN APPROVAL. A RE-STOCKING CHARGE OF 15% APPLIES TO GOODS RETURNED THAT HAVE BEEN CORRECTLY SUPPLIED. NO RETURNS AFTER 30 DAYS FROM SALE DATE.

DISCLAIMER: WE HAVE CAREFULLY CHECKED THE INFORMATION IN THIS CATALOGUE. HOWEVER, WE CANNOT ACCEPT ANY LIABILITY FOR LOSS OR DAMAGE, EITHER DIRECT OR CONSEQUENTIAL, ARISING FROM INFORMATION OBTAINED FROM THIS CATALOGUE. BEFORE USING ADHESIVES, PLEASE REFER TO APPROPRIATE DATA SHEET. AS PRODUCT SPECIFICATIONS CAN CHANGE WITHOUT NOTICE PLEASE CHECK BEFORE USE.

ABBREVIATIONS:

A ALUMINIUM

A.B ANTIQUE BRASS

BLK BLACK

B.P BRASS PLATE

BR BRASS

B.S BRIGHT STEEL

B.Z BRIGHT ZINC

C.P CHROME PLATED

E.B ELECTROPLATED BRASS

F.B FLORENTINE BRONZE

GAL GALVANISED

ABBREVIATIONS:

M.S MILD STEEL

N.P NICKEL PLATE

P.B POLISHED BRASS

RNP RUMBLE NICKEL PLATED

SCP SATIN CHROME PLATED

SS STAINLESS STEEL

SSS SATIN STAINLESS STEEL

ST STEEL

Z.P ZINC PLATED

Z.PASS ZINC PASSIVATE

H

ING

E-F

IT P

TY

LT

D

2001

1.01



HINGES – CONTINUOUS

W x L PIN DIA. GAUGE HOLES FIN. PACK CODE

20 x 3500 1.8 .7 60 E.B 1 110-0200

31 x 1800 1.8 .7 60 N.P 10 110-0206

31 x 1800 1.8 .7 60 F.B 10 110-0208

31 x 1800 1.8 .7 60 BR 1 110-0210

31 x 3500 1.8 .7 60 S.S 1 110-0212

CABINET – LENGTHS ♦ DRILLED COUNTERSUNK HOLES FOR 4 GAUGE SCREWS

25 x 3500 1.8 .7 60 E.B 1 110-0202

31 x 1800 1.8 .7 60 E.B 10 110-0204

38 x 3500 1.8 .7 60 E.B 1 110-0214

31 x 50 Mtr. 1.8 .7 60 E.B 1 110-0350

31 x 50 Mtr. 1.8 .7 60 N.P 1 110-0352

31 x 50 Mtr. 1.8 .7 60 F.B 1 110-0354

31 x 50 Mtr. 1.8 .7 60 P.B 1 110-0356

CABINET – COILS ♦ DRILLED COUNTERSUNK HOLES FOR 4 GAUGE SCREWS

31 x 25 Mtr. 1.8 .7 60 S.S 1 110-0358

W x L PIN DIA. GAUGE HOLES FIN. PACK CODE

INDUSTRIAL – HEAVY DUTY ♦ MILD STEEL – UNDRILLED

W x L GAUGE PIN DIA. HOLES FINISH PACK CODE

25 x 1800 1.0 3.15 - M.S 1 110-0000

25 x 2400 1.0 3.15 - M.S 1 110-0002

31 x 1800 1.0 3.15 - M.S 1 110-0004

38 x 1800 1.0 3.15 - M.S 1 110-0006

50 x 1800 1.0 3.15 - M.S 1 110-0008

38 x 1800 1.2 3.15 - M.S 1 110-0010

50 x 1800 1.2 5.00 - M.S 1 110-0012

75 x 1800 1.2 3.15 - M.S 1 110-0014

38 x 1800 1.6 4.50 - M.S 1 110-0016

50 x 1800 1.6 4.50 - M.S 1 110-0018

50 x 1800 1.6 6.30 - M.S 1 110-0020

50 x 2400 1.6 6.30 - M.S 1 110-0022

76 x 2400 1.6 6.30 - M.S 1 110-0024

100 x 2400 1.6 5.00 - M.S 1 110-0026

150 x 1800 1.6 5.00 - M.S 1 110-0028

62 x 1800 2.0 5.00 - M.S 1 110-0030

62 x 2400 2.0 5.00 - M.S 1 110-0032

76 x 1800 3.0 8.00 - M.S 1 110-0034

101 x 1800 3.0 8.00 - M.S 1 110-0036

150 x 1800 3.0 8.00 - M.S 1 110-0038

80 x 600 4.0 9.50 - M.S 1 110-0040

80 x 2400 4.0 10.0 - M.S 1 110-0042

150 x 2400 4.0 10.0 - M.S 1 110-0044

SPECIALS – MADE TO ORDER

OFFSET LEAF

ODD LEAF

BENT SECTIONS DOUBLE KNUCKLE

STAINLESS STEEL ♦ 304 GRADE STAINLESS STEEL ♦ UNDRILLED UNLESS SPECIFIED

W x L G PIN DIA. HOLES PACK SATIN BRIGHT

25 x 1800 1.0 3.15 - 1 110-0400 110-0464

25 x 2400 1.0 3.15 - 1 110-0402 -

31 x 1800 1.0 3.15 - 1 110-0404 110-0466

31 x 2400 1.2 3.15 - 1 110-0406 -

38 x 1800 1.2 3.15 - 1 - 110-0468

38 x 1800 1.2 5.00 - 1 110-0410 -

38 x 1800 1.2 3.15 - 1 110-0470 -

38 x 2400 1.2 3.15 - 1 110-0414 -

50 x 1800 1.2 3.15 - 1 - 110-0472

50 x 2400 1.2 5.00 - 1 110-0416 -

76 x 1800 1.2 3.15 - 1 110-0418 -

50 x 1800 1.6 6.30 - 1 110-0420 -

57 x 2400 1.6 5.00 - 1 110-0422 -

63 x 1800 1.6 6.30 - 1 110-0424 -

76 x 2100 1.6 4.50 - 1 110-0426 -

100 x 2400 1.6 5.00 - 1 110-0428 -

127 x 2100 2.5 6.30 - 1 110-0430 -

80 x 600 4.0 10.0 - 6 110-0432 -

150 x 2400 4.0 10.0 - 6 110-0434 -

38 x 2400 1.2 3.15 60 ø 1 110-0412 -

H

ING

E-F

IT P

TY

LT

D

2001

1.02




Specials can be manufactured in Brass, Aluminium, Mild Steel, Stainless Steel, Galvabond and Zinc Anneal. Hinges can be cut to size, holes punched and countersunk, leaves offset or made to different dimensions.

Special finishes can be applied. Minimum quanities may apply to some specials.

SWAGED

SOLID BRASS ♦ UNDRILLED UNLESS SPECIFIED

W x L GAUGE PIN DIA. HOLES FIN. PACK CODE

16 x 200 .7 2.00 50 BR 1 110-0500

26 x 1800 .8 2.00 60 BR 1 110-0502

31 x 1800 .7 1.80 60 BR 1 110-0504

38 x 1800 1.2 3.15¹ - BR 1 110-0506

38 x 1800 1.2 5.00 - BR 1 110-0508

50 x 1800 1.2 3.15¹ - BR 1 110-0510

50 x 1800 1.6 6.35 - BR 1 110-0512

¹ STAINLESS STEEL PIN

62 x 1800 2.0 5.00¹ - BR 1 110-0514

ALUMINIUM ♦ UNDRILLED

W x L GAUGE PIN DIA. HOLES FIN. PACK CODE

25 x 1800 1.0 3.15¹ - MILL 1 110-0600

38 x 1800 1.2 5.00¹ - MILL 1 110-0602

¹ STAINLESS STEEL PIN

38 x 2400 1.2 3.18 - MILL 1 110-0604

50 x 2400 1.6 5.00 - MILL 1 110-0606

101 x 2400 1.6 5.00 - MILL 1 110-0608

62 x 2400 2.0 5.00 - MILL 1 110-0610

GALVANISED ♦ UNDRILLED

W x L G PIN DIA. HOLES FIN. PACK CODE

25 x 1800 1.2 3.0² - GAL 1 110-1000

32 x 1800 1.2 3.0² - GAL 1 110-1002

38 x 1800 1.2 3.0² - GAL 1 110-1004

50 x 1800 1.2 3.0² - GAL 1 110-1006

76 x 2100 1.6 6.3² - GAL 1 110-1008

62 x 1800 2.0 5.0¹ - GAL 1 110-1010

62 x 2400 2.0 5.0¹ - GAL 1 110-1012

² BRASS PIN ¹ STAINLESS STEEL PIN

127 x 2100 2.5 6.3² - GAL 1 110-1014

150 x 1800 3.0 8.0¹ - GAL 1 110-1016

H

ING

E-F

IT P

TY

LT

D

2001

1.03




LENGTH OF KNUCKLE

Cabinet or Shower Screen Hinge For panels or extrusions 12mm thick.

3

RAVCO HINGE High strength aluminium alloy precision extrusion with exclusive mechanical principle that eliminates the familiar hinge pin – to provide the

appearance of solid trim and yet operate through a full 180° rotation.

FEATURES

RAVCO Joins door to frame along full length for a smooth, no-gap surface of immense strength. Sealed joint is eminently suited for areas which must be protected against humidity, light and noise. No cross-cuts or breaks. The full profile of each extrusion is joined along its entire length. Consider applications where pilfer-proofing and complete weather- sealing are needed.

APPLICATIONS ♦ Shower Doors ♦ Office Partitions ♦ Laboratory Cabinets ♦ Folding Doors ♦ Office Machines ♦ Instrument Cases

DIA L CAP.* PACK B.GOLD BRIGHT MATT

1 2000 50 1 110-3000 110-3100 110-3210

2 2000 50 1 110-3002 110-3102 110-3212

3 2000 50 1 110-3004 110-3104 110-3214

4 2740 50 1 - - 110-3216

5 2040 80 1 - - 110-3218

- - - - - - -

6 2040 224 1 - - 110-3222

6 2600 224 1 - - 110-3224

* DOOR WEIGHT Kg APPROXIMATE GUIDE ONLY POWDER COAT TO ORDER

6 2800 224 1 - - 110-3226

Shower Screen Hinge for hinging Glass to aluminium frame.

To suit 6mm glass with neo rubber.

1

H

ING

E-F

IT P

TY

LT

D

2001

1.04




Shower Screen Hinge for hinging 6mm glass to 6mm glass with neo rubber.

2

Cabinet Hinge for panels 18mm thick.

4

Light weight door hinge for doors 35m thick.

5

Heavy duty door hinge for doors 35mm thick.

6

17.05

12.7 12.7

12.7

18.0

8.0 12.7

35.0

46.0

4.0 8.0

35.0

49.0

19.0

12.7

11.4

11.1

12.0 11.4

LENGTH BOARD FINISH PACK CODE

64 16-19 BLK 100 180-0200

50 15 E.B 1-12 180-0202

60 20 E.B 1-12 180-0204

TWO-WAY HINGE

LENGTH FINISH PACK CODE

64 B.S 1-50 180-0250

HEAVY DUTY REVERSE ANGLE BUTT HINGE ♦ LOCKER DOOR UP TO 26mm ♦ 3-5mm PUNCHED HOLES IN DOOR SECTION ♦ UNDRILLED FLAP ♦ HAMMERED FIXED PIN

PIN GAUGE FINISH CODE

3.15 1.2 BLK 100-0000

DOUBLE ANGLE CABINET HINGE ♦ MADE ANY LENGTH TO 2400mm ♦ HOLES DRILLED TO SPECIFICATIONS ♦ MINIMUM PRODUCTION RUNS WILL APPLY

H

ING

E-F

IT P

TY

LT

D

2001

1.05



HINGES – SPECIAL APPLICATION

STEEL BUTT HINGE ♦ NARROW SERIES ♦ FIXED PIN ♦ COUNTERSUNK HOLES ♦ PACK – 20

W G HOLES SCREWS S.C.P F.B E.B B.S Z.P

24 1.0 4 4g - - - 120-0300 120-1108

31 1.2 4 5g - - - 120-0302 120-1110

38 1.2 4 5g - - - 120-0304 120-1112

41 1.2 6 5g - - - 120-0306 120-1114

51 1.6 6 6g - 120-0100 120-0240 120-0308 120-1116

61 1.6 6 8g 120-0050 120-0102 120-0242 120-0310 120-1120

75 1.6 8 8g 120-0052 120-0104 120-0244 120-0312 120-1124

51 1.6 6 6g - - - - 120-1118

60 1.6 6 8g - - - - 120-1122

L

25

38

51

63

70

76

85

89

100

x

x

x

x

x

x

x

x

x

x

STEEL BUTT HINGE ♦ NARROW SERIES ♦ LOOSE PIN ♦ COUNTERSUNK HOLES ♦ PACK – 20

L x W G HOLES SCREWS S.C.P F.B E.B B.S Z.P

51 x 38 1.2 4 5g - - - 120-3000 120-3222

63 x 41 1.2 6 5g - - - 120-3002 120-3224

70 x 51 1.6 6 6g - 120-3004 120-3226

76 x 51 1.6 6 6g - - - 120-3006 120-3228

85 x 61 1.6 6 8g 120-2010 120-2100 120-2206 120-3008 120-3230

100 x 75 1.6 8 10g 120-2012 120-2102 120-2208 120-3010 120-3232

STEEL BUTT HINGE – ROUND CORNERS ♦ LOOSE PIN ♦ COUNTERSUNK HOLES

L x W G HOLES SCREWS PACK Z.P C.P

89 x 60 1.6 6 8g 20 - - 120-4616 120-4618 H

ING

E-F

IT P

TY

LT

D

2001

1.06



HINGES – STEEL BUTT

L x W G HOLES SCREWS SATIN CHROME

COMMERCIAL GOLD

ANTIQUE BRONZE

ZINC PLATE

FIXED PIN

75 x 116 2.0 6 8g - - - 122-1000

100 x 75 2.6 8 10g 122-0200 122-0346 122-0410 122-1002

100 x 100 2.6 8 10g 122-0202 122-0348 122-0412 122-1004

100 x 100 3.3 8 10g - - - 122-1006

LOOSE PIN

100 x 75 2.6 8 10g 122-1502 122-1600 122-1668 122-1930

100 x 100 2.6 8 10g 122-1504 122-1602 122-1670 122-1932

100 x 100 3.3 8 10g - - - 122-1934

L G CODE

100 3.2 122-0100

STEEL WIDE THROW BUTT ♦ EXTRA HEAVY DUTY ♦ BEARING TYPE ♦ COUNTERSUNK HOLES ♦ BUTTON TIP ♦ FIXED PIN ♦ ZINC PLATE ♦ PACK – 2

HOLES SCREWS

8 10g

100 3.2 8 10g 122-0102

x W

x 100

x 150

L G CODE

100 2.6 122-0004

STEEL BROAD BUTT HINGE ♦ STEEL MINARET TOP ♦ COUNTERSUNK HOLES ♦ FIXED PIN ♦ BRIGHT STEEL FINISH ♦ PACK 1 – 10

HOLES SCREWS

8 10g

100 2.6 8 10g 122-0006

x W

x 75

x 100

H

ING

E-F

IT P

TY

LT

D

2001

1.07



HINGES – STEEL BROAD BUTT

STEEL BROAD BUTT HINGE ♦ HEAVY DUTY ♦ BUTTON TIP ♦ COUNTERSUNK HOLES ♦ PACK 1 – 10

BRASS BACK FLAP HINGE ♦ EXTRUDED BRASS ♦ COUNTERSUNK HOLES ♦ PACK 1 – 20

L HOLES* SCREWS POLISHED RAW

25 6 4g 172-0140 172-0202

32 6 5g 172-0142 172-0204

38 6 6g 172-0144 172-0206

50 6 8g 172-0146 172-0208

* UNDRILLED ALSO AVAILABLE

x W

x 50

x 50

x 60

x 78

COUNTER FLAP HINGE ♦ FOR HEAVY FLAPS EG. HOTEL BARS ♦ EXTRUDED BRASS ♦ PACK 1 – 10

L C GAUGE SCREWS CODE

105 33 3 8g 170-3302

x W

x 38

BRASS BUTT HINGE ♦ IMPORTED EXTRUDED BRASS ♦ MEDIUM DUTY ♦ FIXED PIN – COUNTERSUNK HOLES

L HOLES SCREWS POLISHED RAW

25 6 4g 120-5000 120-5144

38 6 4g 120-5002 120-5146

101 8 8g 120-5014 120-5158

89 6 8g 120-5010 120-5154

50 6 5g 120-5004 120-5148

63 6 6g 120-5006 120-5150

76 6 6g 120-5008 120-5152

101 8 8g 120-5012 120-5156

x W

x 19

x 22

x 29

x 35

x 41

x 51

x 50

x 60

LIGHT BRASS BUTT HINGE ♦ FIXED PIN ♦ PACK 1 – 50

AUSTRALIAN MADE

L x SCREWS CODE

12 x 1g PAN 120-5502

19 x 1g CSK 120-5504

25 x 1g CSK 120-5506

12 x PINS 120-5514

19 x 1g PAN 120-5516

25 x 1g PAN 120-5518

IMPORTED

W HOLES

14 4

13 4

17 4

14 4

15 4

17 4

H

ING

E-F

IT P

TY

LT

D

2001

1.08



HINGES – BRASS BUTT

120-5502

L

W C

L

W

H

ING

E-F

IT P

TY

LT

D

2001

1.09



HINGES – BRASS BUTT

LOOSE PIN BUTT HINGE ♦ EXTRUDED BRASS ♦ BALL TIPPED (SMALL) ♦ COUNTERSUNK HOLES ♦ PACK 2 – 10

L HOLES SCREWS CODE

50 6 5g 120-6400

65 6 6g 120-6402

89 8 8g 120-6406

100 8 8g 120-6408

x W

x 29

x 35

x 51

x 60

76 x 41 6 6g 120-6404

BRONZED WASHERED HINGE ♦ EXTRUDED BRASS ♦ HEAVY DUTY ♦ 10 g FIXING COUNTERSUNK SCREWS ♦ PACK 2 – 10

L HOLES FIN. BALL TIP L.PIN

PLAIN F.PIN

100 8 SCP 120-6258 120-6292

100 8 PB 120-6260 120-6294

100 8 SCP 120-6262 120-6296

100 8 PB 120-6264 120-6298

x W

x 75

x 75

x 100

x 100

STANDARD DUTY HINGE ♦ POLISHED BRASS ♦ NOT RECOMMENDED FOR HEAVY DOORS ♦ FIXED S.S PIN ♦ COUNTERSUNK HOLES ♦ PACK – 2

L x W HOLES SCREWS PLAIN

100 x 150 8 10g 120-7210

100 x 175 8 10g 120-7212

100 x 200 8 10g 120-7214

HEAVY DUTY BUTT HINGE ♦ WIDE THROW ♦ FEATURE DOOR HINGE ♦ POLISHED BRASS LAQUERED ♦ PHOSPHUR BRONZE WASHERS ♦ FIXED PIN ♦ 7.5mm S.S PIN ♦ HINGE ROLL 19mm ♦ COUNTERSUNK HOLES

L x W HOLES SCREWS PLAIN BALL TIPPED

102 x 184 8 12g 120-7200 120-7206

127 x 184 10 12g 120-7202 120-7208

BRASS BROAD BUTT HINGE ♦ FIXED PIN ♦ BALL TIPPED ♦ COUNTERSUNK HOLES ♦ POLISHED BRASS ♦ PACK 1 – 10

L x W HOLES SCREWS CODE

100 x 75 8 10g 122-2116

100 x 100 8 10g 122-2118

PLAIN BROAD BUTT ♦ FIXED PIN ♦ POLISHED BRASS ♦ COUNTERSUNK HOLES

L HOLES SCREWS CODE

100 8 10g 122-2402

100 8 10g 122-2404

89 8 10g 122-2400

x W

x 89

x 75

x 100

CHROME PLATE HINGE ♦ LOOSE PIN ♦ BALL TIPPED OR PLAIN ♦ COUNTERSUNK HOLES ♦ BRASS – BRIGHT CHROME PLATE ♦ PACK 1 – 10


50 x 29 6 5g 122-2200

100 x 75 8 8g 122-2204

100 x 100 8 8g 122-2206

BALL TIP

85 x 60 6 8g 122-2340

100 x 75 8 8g 122-2342

100 x 100 8 8g 122-2344

PLAIN

85 x 60 6 8g 122-2202

BRASS BROAD BUTT HINGE ♦ LOOSE PIN ♦ BALL TIPPED ♦ POLISHED BRASS ♦ COUNTERSUNK HOLES ♦ PACK 1 – 10


85 x 60 8 8g 122-2000

89 x 60 8 8g 122-2002

89 x 89 8 10g 122-2004

100 x 75 8 10g 122-2006

100 x 100 8 10g 122-2008

H

ING

E-F

IT P

TY

LT

D

2001

1.10



HINGES – BRASS BROAD BUTT

H

ING

E-F

IT P

TY

LT

D

2001

1.11



HINGES – STAINLESS STEEL BUTT

S.S.S BUTT HINGE ♦ 304 GRADE STAINLESS ♦ SATIN FINISH

♦ COUNTERSUNK HOLES ♦ PACK 1 – 20

L x W G HOLES SCREWS LOOSE PIN FIXED PIN

25 x 24 1.0 4 4g - 120-6576

50 x 27 1.2 6 4g - 120-6578

50 x 40 1.2 4 6g - 120-6580

70 x 51 1.6 6 6g 120-6508 120-6582

85 x 60 1.6 6 8g 120-6510 120-6584

100 x 75 1.6 6 8g 120-6512 120-6586

S.S.S BROAD BUTT HINGE ♦ 304 GRADE STAINLESS ♦ BUTTON TIPPED

♦ COUNTERSUNK HOLES ♦ PACK – 2

L x W G HOLES SCREWS LOOSE PIN FIXED PIN

POLISHED

100 x 75 2.5 8 10g 122-2530 122-2604

100 x 100 2.5 8 10g 122-2532 122-2606

100 x 75 2.5 8 10g 122-2550 122-2664

100 x 100 2.5 8 10g 122-2552 122-2666

130 x 100 3.0 8 10g - 122-2670

SATIN

125 x 90 3.0 8 10g - 122-2668

S.S.S BROAD BUTT HINGE ♦ HEAVY DUTY ♦ 304 GRADE STAINLESS ♦ BUTTON TIPPED ♦ BEARING TYPE

♦ SATIN FINISH ♦ 6mm FIXED PIN ♦ COUNTERSUNK HOLES ♦ PACK – 2

L x W G HOLES SCREWS CODE

100 x 75 3.0 8 10g 122-2700

100 x 100 3.0 8 10g 122-2702

S.S.S WIDE THROW BUTT HINGE ♦ HEAVY DUTY ♦ 304 GRADE STAINLESS ♦ BUTTON TIPPED

♦ SATIN FINISH ♦ COUNTERSUNK HOLES ♦ 8mm FIXED PIN

L x W G HOLES SCREWS PACK CODE

100 x 100 3.0 8 10g 2 122-2750

100 x 125 3.0 8 10g 2 122-2752

100 x 150 3.0 8 10g 2 122-2754

100 x 175 3.0 8 10g 2 122-2756

100 x 200 3.0 8 10g 2 122-2758

H

ING

E-F

IT P

TY

LT

D

2001

1.12



HINGES – ALUMINIUM

ALUMINIUM BUTT HINGE ♦ FIXED PIN ♦ NYLON BUSHES ♦ SATIN ALUMINIUM FINISH

L GAUGE PACK DRILLED UNDRILLED

76 2.8 2 – 6 120-6670 -

76 3.0 2 – 6 120-6672 -

100 3.0 2 – 6 - 120-6674

102 3.0 2 – 6 120-6676 120-6696

100 3.0 2 – 6 120-6678 120-6698

100 4.0 2 – 6 120-6680 -

100 5.5 & 3.0 2 – 6 120-6682 -

¹ COMBINATION DRILLED ONE SIDE ² LOOSE PIN AVAILABLE TO ORDER

x W

x 48

x 60

x 51

x 83

x 102

x 102¹

x 80²

WIDE THROW ALUMINIUM BUTTS ♦ FIXED PIN ♦ T6 ALLOY ♦ NYLON BUSHES ♦ SATIN ALUMINIUM FINISH ♦ UNDRILLED

L x W GAUGE PACK CODE

125 x 102 3.1 2 – 12 122-2794

125 x 165 3.1 2 – 12 122-2796

HEAVY DUTY FAST FIX HINGE ♦ 100 Kg DOOR CAPACITY ♦ SUITABLE FOR HIGH USE ENTRANCE DOORS ♦ FIXING FRONT AND EDGE WITH 10g SCREWS ♦ T6 ALLOY ♦ FIXED S.S. PIN 6mm ♦ FLANGED NYLON BUSHES WITH METAL END CAPS ♦ SUITS DOOR CLOSURE USE

FINISH GAUGE PACK CODE

NAT. AL 3.4 2 – 6 120-6600

SATIN 3.4 2 – 6 120-6602

MEDIUM DUTY FAST FIX HINGE ♦ NO FRONT FIXING ♦ EDGE FIXING WITH 10g SCREWS ♦ T6 ALLOY ♦ FIXED S.S. PIN 6mm ♦ FLANGED NYLON BUSHES WITH METAL END CAPS

FINISH GAUGE PACK CODE

NAT. AL 3.4 2 – 6 120-6622

SATIN 3.4 2 – 6 120-6624

COLOURS AVAILABLE ON SPECIAL ORDER

DRILLED

UNDRILLED

H

ING

E-F

IT P

TY

LT

D

2001

1.13



HINGES – NYLON/PLASTIC BUTT

NYLON HINGE ♦ FIBRE REINFORCED U.V STABLE ♦ STAINLESS STEEL PIN 304 GRADE ♦ COUNTERSUNK HOLES ♦ PACK – 50

L C PIN HOLES SCREWS CODE

101 12.5 4 8 8g 120-6798

x W

x 59

BLACK FINISH AVAILABLE – SUBJECT TO MINIMUM ORDER

POLYMER HINGE ♦ UV STABLE – GLASS REINFORCED – BLACK FINISH ♦ SURFACE FIX FOR LIGHT WEIGHT DOORS & GATES 10Kg MAX ♦ 180º OPENING – GATE STOP REQUIRED ♦ STAINLESS STEEL PIN ♦ COUNTERSUNK HOLES ♦ PACK 2 – 10

L C PIN HOLES SCREWS CODE

SPRING TYPE

100 14 4 8 10g 120-6710

100 14 4 8 10g 120-6720

NO SPRING

x W

x 86

x 86

PLASTIC HINGE ♦ FLEXIBLE MEMBRANE CENTRE ♦ CHEMICAL RESISTANCE TO SALT WATER AND

MOST SOLVENTS ♦ TEMPERATURE RANGE –40º TO +80º C ♦ WHITE FINISH ♦ PACK – 10

L G HOLES SCREWS CODE

25 3.2 4 5g 120-6730

38 3.1 4 5g 120-6732

50 3.1 4 5g 120-6734

x W

x 76

x 25

x 38

NYLON HINGE ♦ WHITE U.V. STABLE ♦ STAINLESS STEEL PIN 304 GRADE ♦ COUNTERSUNK HOLES ♦ PACK 1 – 20

L x W C PIN HOLES SCREWS CODE

38 x 22 5.5 3 6 4g 120-6740

51 x 28 7.0 3 6 5g 120-6742

64 x 35 7.0 3 6 5g 120-6744

76 x 41 9.5 4 6 8g 120-6746

89 x 50 10.0 4 8 8g 120-6748

101 x 59 12.5 4 8 8g 120-6750

CODE 120-6734

C

C

L GAUGE WHITE

75 1.6 186-0010

SECURITY SCREEN DOOR HINGE ♦ STEEL FIXED PIN ♦ FIXING 6g – CSK SCREWS ♦ PACK 1 – 50 – 100

BLACK

186-0000

x W

x 45

DIMPLE DOOR HINGE ♦ STEEL ♦ HANDED – ONE SIDE DRILLED ♦ FIXING 10g – CSK SCREWS ♦ PACK – 100

L GAUGE FINISH L.H R.H

100 1.6 Z.P 186-0102 186-0116

100 2.5 Z.P 186-0104 186-0118

100 1.6 Z.P 186-0200 186-0210

BLANK HINGE ♦ NO DIMPLE

x W

x 75

x 75

x 75

SECURITY DOOR HINGE ♦ STAINLESS STEEL ♦ BUTTON TIPPED FIXED PIN ♦ FIXING 10g – CSK SCREWS

L GAUGE FINISH PACK CODE

100 2.5 S.S 20 186-0252

100 2.5 S.S 20 186-0254

85 1.6 Z.P 20 186-0270

100 1.6 Z.P 20 186-0272

STANDARD TIP ♦ STEEL

x W

x 75

x 100

x 60

x 75

BLANK HINGES ♦ STEEL ♦ NO HOLES

L x W GAUGE FINISH PACK CODE

100 x 100 3.0 Z.P 20 186-0300

125 x 125 3.0 Z.P 20 186-0302

150 x 150 3.0 Z.P 20 186-0304 H

ING

E-F

IT P

TY

LT

D

2001

1.14



HINGES – MISCELLANEOUS

HIR-LINE HINGE – FIXED PIN ♦ NON HANDED ♦ NO CHECKING-IN

♦ OPENING ANGLE 180°+ ♦ PACK 1 – 20

L PIN SCREW HOLES MISC B.S E.B F.B Z.P

38 FLAT 4g 5 - - - 126-0200 -

50 FLAT 4g 5 - - 126-0140 126-0202 126-0260

50 CENTRE 4g 5 - - 126-0142 126-0204 126-0262

65 FLAT 5g 5 - - 126-0144 126-0206 126-0264

65¹ CENTRE 5g 5 126-0000 - 126-0146 126-0208 126-0266

75² FLAT 6g 5 126-0010 126-0088 126-0148 126-0210 126-0268

75³ CENTRE 6g 5 126-0020 126-0090 126-0150 126-0212 126-0270

90 FLAT 7g 6 - 126-0092 126-0152 126-0214 126-0272

90 CENTRE 7g 6 - 126-0094 126-0154 126-0216 126-0274

100 FLAT 8g 6 - 126-0096 126-0156 126-0218 126-0276

100 CENTRE 8g 6 - 126-0098 126-0158 126-0220 126-0278

¹ NICKEL PLATE ² ALUMINIUM ³ STAINLESS STEEL

HIR-LINE HINGE – LOOSE PIN ♦ PACK 1– 20

L PIN SCREW HOLES S.S B.S E.B F.B Z.P

75 FLAT 6g 5 - 126-0344 126-0420 126-0502 126-0556

75 CENTRE 6g 5 126-0300 126-0346 126-0422 126-0504 126-0558

90 FLAT 7g 6 - 126-0348 126-0424 126-0506 126-0560

90 CENTRE 7g 6 - 126-0350 126-0426 126-0508 126-0562

100 FLAT 8g 6 - 126-0352 126-0428 126-0510 126-0564

100 CENTRE 8g 6 - 126-0354 126-0430 126-0512 126-0566 H

ING

E-F

IT P

TY

LT

D

2001

1.15



HINGES – HIR-LINE

FIXED PIN LOOSE PIN

FLAT PROFILE

CENTRE PROFILE

L HOLES SCREWS LOOSE PIN

63 5 5g 126-0992

75 5 6g 126-0994

88 5 8g 126-0996

100 5 8g 126-0998

SOLID BRASS HIR-LINE ♦ POLISHED BRASS ♦ COUNTERSUNK HOLES ♦ NO CHECKING IN ♦ CENTRE PIN ♦ PACK 1 – 20

FIXED PIN

126-0900

126-0902

126-0904

126-0906

x W

x 25

x 28

x 33

x 42

H

ING

E-F

IT P

TY

LT

D

2001

1.16



HINGES – HIR-LINE

OFFSET HIR-LINE ♦ HEAVY DUTY FOR TIMBER OR ALUMINIUM DOORS ♦ T6 ALLOY WITH NYLON BUSHES ♦ 6mm S.S PIN ♦ MINIMUM DOOR THICKNESS 35mm ♦ PACK 2 – 6

L x W G SCREWS FINISH CODE

110 x 44² 3.4 10g SATIN 126-1010

² FLAP 34mm

LOOSE PIN BALL TIP CENTRE

FIXED PIN FLAT

FINIAL CABINET HINGE ♦ PLATED STEEL ♦ FIXED FLAT PIN ♦ NO CHECKING IN ♦ COUNTERSUNK HOLES ♦ PACK 1 – 100

L x W SCREWS HOLES F.B E.B

78 x 23¹ 4g 4 126-1520 126-1444

91 x 24¹ 5g 5 126-1522 126-1450

¹ OVERALL MEASUREMENT

FLAT PIN CENTRE PIN

HIGH TENSILE ALLOY HIR-LINE ♦ FOR ALUMINIUM OR TIMBER FIXING ♦ QUICK FIXING ♦ NO CHECKING IN ♦ COUNTERSUNK HOLES 8g ♦ 4.76mm S.S PIN ♦ NYLON BEARINGS & END CAPS ♦ FIXED PIN ♦ PACK 2 – 20

L GAUGE FINISH CODE

75 3 ALLOY 126-2000

101 3 ALLOY 126-2002

101 3 BLACK 126-2004

101 3 BRONZE 126-2006

x W

x 35

x 49

x 49

x 49

HIGH TENSILE ALLOY HIR-LINE ♦ FOR ALUMINIUM OR TIMBER FIXING ♦ QUICK FIXING ♦ NO CHECKING IN ♦ COUNTERSUNK HOLES 8g ♦ 4.76mm S.S PIN ♦ NYLON BEARINGS & END CAPS ♦ FIXED PIN ♦ PACK 2 – 20

L GAUGE FINISH CODE

101 3 ALLOY 126-2224

101 3 BLACK 126-2226

101 3 BRONZE 126-2228

x W

x 49

x 49

x 49

L TAPER FINISH CODE

100 4 - 2 ALLOY 126-3000

TAPERED LEAF ♦ FOR TIMBER DOORS – MEDIUM ♦ T6 ALLOY ♦ 4.7mm S.S PIN ♦ COUNTERSUNK HOLES 8g ♦ PACK – 6

x W

x 49

S.S.S HIR-LINE HINGE ♦ 304 GRADE STAINLESS ♦ QUICK FIXING – NO CHECKING IN ♦ COUNTERSUNK HOLES 8g ♦ 6mm S.S PIN ♦ S.S BEARING SPACER ♦ S.S END CAPS ♦ FIXED PIN ♦ PACK 2 – 20

L GAUGE FRAME CODE

101 3 TIMBER 126-1100

101 3 ALUM 126-1110

x W

x 49

x 49

H

ING

E-F

IT P

TY

LT

D

2001

1.17



HINGES – HIR-LINE

* THROW. DISTANCE BETWEEN FACE OF FRAME AND FACE OF SHUTTER AT 180°. H

ING

E-F

IT P

TY

LT

D

2001

1.18



HINGES – SHUTTER /PARLIAMENT

STEEL SHUTTER HINGES ♦ DESIGNED FOR WINDOW SHUTTERS ♦ NOT RECOMMENDED FOR HEAVY DOORS ♦ FIXING – 10g CSK SCREWS

W x L x C* FINISH PACK CODE

101 x 126 x 77 Z.P 1 – 12 128-0112

127 x 182 x 127 Z.P 1 – 12 128-0114

W x L x C* FINISH PACK CODE

100 x 100 x 50 P.B 1 – 12 128-0500

100 x 125 x 75 P.B 1 – 12 128-0502

100 x 150 x 100 P.B 1 – 12 128-0504

100 x 178 x 125 P.B 1 – 12 128-0506

100 x 200 x 150 P.B 1 – 12 128-0508

BRASS SHUTTER HINGES ♦ DESIGNED FOR WINDOW SHUTTERS ♦ NOT RECOMMENDED FOR HEAVY DOORS ♦ FIXING – 10g CSK SCREWS

PARLIAMENT HINGE ♦ HEAVY DUTY ♦ DESIGNED FOR DOORS ♦ PIN DIA 8mm ♦ FIXING – 12g CSK SCREWS

W x L x C* x PIN FINISH PACK CODE

100 x 125 x 65 x 58 P.B 2 128-0588

127 x 200 x 128 x 77 P.B 2 128-0590

S.S.S HOSPITAL HINGE ♦ SWING CLEAR FEATURE ♦ 304 GRADE STAINLESS ♦ BUTTON TIPPED ♦ COUNTERSUNK HOLES (8) ♦ FIXING – 12g CSK SCREWS

LENGTH FLAPS G PACK CODE

100 50 x 50 3.0 2 128-7020

C

C

C

H

ING

E-F

IT P

TY

LT

D

2001

1.19



HINGES – BACK FLAP

HEAVY DUTY BACKFLAP HINGE ♦ CAST STEEL ♦ NO HOLES

♦ FIXED PIN ♦ PACK 1 – 10

L x W G PIN FIX CODE

40 x 180 5 6 WELD 172-0848

50 x 160 6 8 WELD 172-0850

50 x 200 6 8 WELD 172-0852

60 x 200 6 8 WELD 172-0854

STEEL BACK FLAP HINGE ♦ WELD TYPE NO HOLES ♦ BRIGHT STEEL

L x W G FIX PACK CODE

25 x 64 1.2 WELD 20 172-0752

32 x 81 1.6 WELD 20 172-0754

38 x 96 1.6 WELD 20 172-0756

51 x 118 1.6 WELD 20 172-0758

64 x 139 2.0 WELD 20 172-0760

GALVANISED

77 x 154² 3.0 WELD 10 172-0790

102 x 203² 3.0 WELD 10 172-0792

² BRASS PIN 6mm

STEEL BACK FLAP HINGE ♦ 4 KNUCKLE TYPE ♦ PACK 1 – 20

♦ COUNTERSUNK HOLES

L x W G SCREWS B.S Z.P

25 x 64 1.2 5g 172-0400 172-0464

32 x 81 1.6 8g 172-0402 172-0466

38 x 96 1.6 8g 172-0404 172-0468

51 x 118 1.6 8g 172-0406 172-0470

64 x 139 2.0 8g 172-0408 172-0472

HEAVY DUTY BACK FLAP

♦ 3 KNUCKLE TYPE

51 x 111 2.0 8g 172-0530 172-0600

76 x 174 3.0 10g - 172-0602

51 x 111¹ 2.0 8g 172-0532 -

¹ UNASSEMBLED

STEEL BACK FLAP HINGE ♦ IMPORTED 3 KNUCKLE TYPE ♦ ZINC PLATE ♦ COUNTERSUNK HOLES

L x W G SCREWS PACK CODE

32 x 81 1.6 8g 20 172-0330

38 x 96 1.6 8g 20 172-0332

51 x 118 1.6 8g 20 172-0334

64 x 139 2.0 8g 20 172-0336

SPECIFICATIONS QUOTED ARE TO BE USED AS A GUIDE ONLY. H

ING

E-F

IT P

TY

LT

D

2001

1.20



HINGES – DOUBLE ACTION

HOLD SIZE FINISH PACK CODE

CLOSED 100 S.C.P 2 194-8824

OPEN 100 S.C.P 2 194-8826

SINGLE ACTION ♦ SPRING TENSION ADJUSTMENT ♦ 35mm MAX DOOR THICKNESS ♦ 35 Kg MAX DOOR WEIGHT ♦ 2340 x 820mm MAX SIZE

SIZE MAX THICKNESS

MAX WEIGHT FINISH PACK QTY

CODE

75 28 10 Kg 2040 x 620 C.P 2 194-7000

75 28 10 Kg 2040 x 620 S.C.P 2 194-7010

75 28 10 Kg 2040 x 620 F.B 2 194-7020

75 28 10 Kg 2040 x 620 P.B 2 194-7030

100 35 20 Kg 2040 x 820 C.P 2 194-7040

100 35 20 Kg 2040 x 820 S.C.P 2 194-7050

100 35 20 Kg 2040 x 820 F.B 2 194-7060

100 35 20 Kg 2040 x 820 P.B 2 194-7070

150 45 40 Kg 2340 x 870 C.P 2 194-7080

150 45 40 Kg 2340 x 870 S.C.P 2 194-7090

150 45 40 Kg 2340 x 870 F.B 2 194-7100

150 45 40 Kg 2340 x 870 P.B 2 194-7110

MAX DOOR SIZE

HEAVY DUTY ♦ PLATED STEEL DOUBLE ACTION HINGE ♦ SPRING TENSION ADJUSTMENT

H

ING

E-F

IT P

TY

LT

D

2001

1.21



HINGES – SPRING

NO.40 TYPE ♦ LIGHT DUTY ♦ SCREEN DOOR TYPE ♦ FACE FIX

NO. 45 TYPE ♦ ADJUSTABLE SPRING ♦ MEDIUM DUTY ♦ FACE FIX

DOUBLE ACTION ♦ SERIES 46 ♦ ADJUSTABLE SPRING ♦ MEDIUM DUTY

TYPE LENGTH WIDTH FINISH PACK CODE

NO. 40 72 62 B.Z 10 190-0300

NO. 45 78 76 B.Z 10 190-0408

NO. 46 78 - B.Z 10 190-0512

ADJUSTABLE SPRING HINGE ♦ FOR TOILET PARTITION DOORS ♦ CAPACITY 30 Kg PER PAIR ♦ NON-HANDED ♦ SATIN STAINLESS STEEL ♦ PACK – 1

DIRECTION HOLD SCREW FIX BOLT FIX

OPEN IN CLOSED 190-0102 190-0216

OPEN IN OPEN 190-0104 190-0218

OPEN OUT CLOSED 190-0106 190-0220

REFER TO PAGE 3.03 FOR TOILET PARTITION KITS

CONTINUOUS SPRING HINGE ♦ ANY LENGTH 50 – 1800mm ♦ STAINLESS STEEL OR MILD STEEL ♦ HOLD OPEN OR HOLD CLOSED SPRING ♦ SPECIAL ORDER ONLY ♦ MINIMUM QUANTITIES MAY APPLY ♦ CODE: 100-0020

GRAVITY HINGE ♦ L 90 x W 80 x G 2.5 ♦ WEIGHT CAPACITY 35 Kg ♦ SATIN STAINLESS STEEL ♦ FACE FIX

♦ SELF LUBRICATING CENTRE BUSH ♦ HOLD OPEN OR HOLD CLOSED ♦ IDEAL FOR; - TOILET PARTITIONS - CHANGE ROOMS ♦ PACK – 1 PAIR WITH FIXINGS

RISING BUTT HINGE ♦ EDGE MOUNT ♦ FIXING – 10g CSK SCREWS

HAND SIZE FINISH PACK CODE

LH 75 B.Z 1 PR 192-1000

RH 75 B.Z 1 PR 192-1002

LH 100 S.S 1 PR 192-1008

RH 100 S.S 1 PR 192-1010

REFER PAGE 3.03 FOR TOILET PARTITION KITS

GRAVITY HINGE ♦ FOR LIGHT WEIGHT CAFÉ AND CHANGE ROOM

DOORS ♦ TOP & BOTTOM FIX ♦ FIXING SCREWS SUPPLIED

FINISH PACK CODE

E.B 1 – 15 192-0200

REFRIGERATION CABINET HINGE ♦ ZINC DIE CAST ♦ NYLON BUSH ♦ GRAVITY CLOSE ♦ SURFACE MOUNT ♦ FIXING – 8g CSK SCREWS

SIZE FINISH PACK CODE

111 x 19 N.P 2 192-1132 H

ING

E-F

IT P

TY

LT

D

2001

1.22



HINGES – GRAVITY

HAND HOLD FIXING CODE

LH OPEN SCREW 192-0050

RH OPEN SCREW 192-0052

LH CLOSED SCREW 192-0054

RH CLOSED SCREW 192-0058

LH OPEN BOLT 192-0096

RH OPEN BOLT 192-0098

LH CLOSED BOLT 192-0100

RH CLOSED BOLT 192-0102

L PACK CODE

45 1PR – 50PR 185-0018

ELBOW PIVOT HINGE ♦ 15mm OFFSET – LIGHT DUTY ♦ FIXED TOP AND BOTTOM FOR DOORS ♦ SIDE FIXING FOR DISPLAY BOX LIDS ♦ 270° OPENING ANGLE ♦ FIXING – 5g CSK SCREWS ♦ LEFT AND RIGHT HANDED ♦ STEEL E.BRASS FINISH

x W

x 10

PIVOT CABINET HINGE ♦ FOR PANEL DOORS/ LIDS ♦ 14 – 19mm CAPACITY ♦ OPENING ANGLE 110° ♦ HANDED ♦ HINGE – MATT BLACK STEEL ♦ BUSH – BLACK PLASTIC ♦ SET COMPRISES 2 HINGES 2 BUSHES IN POLY BAG

L x W PACK CODE

40 x 16 1 – 12 SETS 185-0500

USE SUPPORT BRACKET CODE: 199-5000 IF NO TOP OR BOTTOM MOUNTING AVAILABLE

LIGHT DUTY PIVOT HINGE ♦ FIXED TOP AND BOTTOM FOR DOORS ♦ SIDE FIXING FOR DISPLAY BOX LIDS ♦ OPENING ANGLE DEPENDENT ON INSTALLATION ♦ FIXING – 5g CSK SCREWS ♦ STEEL E.BRASS ARM ♦ SOLID BRASS SOCKET*

L PACK CODE

50 1 – 50 185-0002

* SOCKET 8 x 9.5mm DIA

x W

x 10

FINISH PACK CODE

E.B ON STEEL 1 – 50 185-0552

360° PIVOT HINGE ♦ FOR FOLDING TABLES ♦ NON HANDED

BUSH DRILLING 9mm x 7mm

H

ING

E-F

IT P

TY

LT

D

2001

1.23



HINGES – PIVOT

H

ING

E-F

IT P

TY

LT

D

2001

1.24



HINGES – PIVOT

PIVOT HINGE ♦ REFRIGERATION CABINET TYPE ♦ STEEL WITH NYLON BUSHES ♦ 19mm MAX DOOR ♦ NON HANDED ♦ FIXING – 10g CSK SCREWS


84 N.P 2 185-1242

CABINET PIVOT HINGE ♦ 180° MAX. DOOR OPENING ANGLE ♦ STEEL BRASS PLATED ♦ FIXING – 4g CSK SCREWS ♦ 2 SETS PER DOOR

A PACK CODE

60 1 SET 185-1000

80 1 SET 185-1002

DOOR PIVOT HINGE ♦ HEAVY DUTY PIVOT ♦ ADJUSTABLE HEIGHT TOP ♦ PIVOT HEADER ♦ FIXING – 10g SCREWS ♦ MINIMUM DOOR THICKNESS 38mm

FINISH PACK CODE

CAST METAL 1 SET 185-1334

FRONT SIDE

HOOK HINGE ♦ LIFT OFF WINDOW ♦ ONE SET = ONE WINDOW


96 x 32 GAL 1 SET 185-1408

96 x 32 F.B 1 SET 185-1410

11.8 DEPTH

35

52

5.5

CLIP ON SERIES 110° HINGE ♦ ALL METAL ♦ FOR WOODEN DOORS 16 – 20mm ♦ 6 WAY ADJUSTABLE ♦ DRILL 35mm HOLE 4mm FROM EDGE ♦ FIXING – 6g CSK SCREWS ♦ NICKEL PLATE FINISH ♦ PACK 1 – 50 – 100

TYPE NO CATCH CATCH

OVERLAY 150-5000 150-0020

10mm CRANK - 150-0022

16.5mm CRANK - 150-0024

CLIP ON MOUNTING PLATE ♦ TO SUIT 110º & 165º HINGES ♦ ELONGATED HOLES FOR VERTICAL ADJUSTMENT ♦ FIXING – 6g CSK SCREW OR EURO SCREW ♦ NICKEL PLATE FINISH ♦ PACK 1– 50 – 100

TYPE SCREW EURO SCREW

0mm STEEL 199-6000 199-6118

2mm STEEL 199-6002 -

8mm CAST 199-6004 -

CLIP ON SERIES 165° HINGE ♦ ALL METAL ♦ FOR WOODEN DOORS 16 – 22mm ♦ 6 WAY ADJUSTABLE ♦ DRILL 35mm HOLE 4 – 6mm FROM EDGE ♦ FIXING – 6g CSK SCREWS ♦ NICKEL PLATE FINISH ♦ PACK 1 – 50 – 100

TYPE NO CATCH CATCH

OVERLAY 150-5180 150-5220

10mm CRANK - 150-5222

H

ING

E-F

IT P

TY

LT

D

2001

1.25



HINGES – CONCEALED

HOLE SINKER ♦ TYPE 1 – CARBIDE TIPPED ♦ TYPE 2 – HIGH SPEED STEEL ♦ PACK – 1

SIZE CARBIDE STEEL

26 - 199-6800

35 199-6888 199-6802

INSET

THICK DOOR 95° HINGE ♦ CLIP ON FOR EXTRA THICK OR BUILT UP WOODEN DOORS UP TO 32mm THICK ♦ INBUILT CATCH ♦ 6 WAY ADJUSTABLE ♦ DRILL 35mm HOLE 4 – 10mm FROM EDGE ♦ FIXING – 6g CSK SCREWS ♦ NICKEL PLATE ON STEEL FINISH ♦ PACK 1 – 10

TYPE CODE

OVERLAY 150-0038

9.5 CRANK 150-0040

16mm CRANK 150-0042

FULL OVERLAY

ALLOY DOOR 95° HINGE ♦ CLIP ON FOR ALLOY DOORS ♦ 6 WAY ADJUSTABLE ♦ INBUILT CATCH ♦ FIXING – 6g CSK SCREWS ♦ NICKEL PLATE ON STEEL FINISH ♦ PACK 1– 50

TYPE CODE

OVERLAY 150-0100

H

ING

E-F

IT P

TY

LT

D

2001

1.26




DRILLING GUIDE

2500

●

2000

● ●

1500

● ●

1000 ●

●

500 ● ● ●

● ● ● ●

600 ┤

HALF OVERLAY

11.8 35

52

5.5

H

ING

E-F

IT P

TY

LT

D

2001

1.27



HINGES – CLIP ON CONCEALED

CLIP ON NEGATIVE ANGLE HINGE ♦ FOR WOODEN DOORS 16 – 20mm ♦ OPENING ANGLE 125° ♦ NEGATIVE ANGLE 30° ♦ DRILLING 35mm ♦ FIXING – 6g CSK SCREWS ♦ NICKEL PLATE ON STEEL FINISH ♦ PACK 1 – 10

TYPE CODE

WITH CATCH 150-0154

CLIP ON CORNER CABINET HINGE ♦ FOR CORNER WOODEN DOORS 16 – 20mm ♦ 6 WAY ADJUSTABLE ♦ OPENING ANGLE 25° / 90° ♦ FIXING – 6g CSK SCREWS ♦ NICKEL PLATE ON STEEL FINISH ♦ PACK 1 – 10

TYPE CODE

WITH CATCH 150-0290

CLIP ON 45° CORNER HINGE ♦ FOR WOODEN DOORS 16 – 20mm ♦ MAX OPENING 90° ♦ DRILL 35mm HOLE 4mm FROM EDGE ♦ FIXING – 6g CSK SCREWS ♦ NICKEL PLATE ON STEEL FINISH ♦ PACK 1 – 10

TYPE CODE

WITH CATCH 150-0310

CLIP ON 90° POST HINGE ♦ FOR WOODEN DOORS 16 – 28mm ♦ FACE FRAME MOUNTING ♦ 6 WAY ADJUSTABLE ♦ DRILL 35mm HOLE 4mm FROM EDGE ♦ FIXING – 6g CSK SCREWS ♦ NICKEL PLATE ON STEEL FINISH ♦ PACK 1 – 10

TYPE CODE

WITH CATCH 150-0404

CLIP ON MOUNTING PLATE ♦ VERTICAL ADJUSTMENT ♦ NICKEL PLATE ON STEEL FINISH

TYPE CODE

MOUNTING PLATE 199-6000

H

ING

E-F

IT P

TY

LT

D

2001

1.28




FINISH PACK

N.P 1 – 20

110° FACE FRAME HINGE ♦ ALL METAL FULLY CONCEALED FOR WOODEN DOORS ON

50 x 25mm FRAME CONSTRUCTION ♦ IDEAL FOR NEW DOORS ON OLD FRAMES ♦ MAX. DOOR THICKNESS 28mm ♦ SPRING, HEIGHT AND SIDEWAYS ADJUSTMENT ♦ FIXING – 6g CSK SCREWS ♦ CUP DEPTH 11.8mm ♦ DRILL Dia 35mm

CODE

150-1006

FINISH PACK

N.P 1 – 20

SERIES 580 ♦ ALL METAL 100° SEMI CONCEALED HINGE ♦ INBUILT CATCH ♦ FOR WOODEN DOORS 16 – 19mm THICK ♦ RELEASABLE PIN ♦ SCREW MOUNTED ♦ FIXING – 6g CSK SCREWS

19mm

150-1122

16mm

150-1120

FINISH PACK

N.P 1 – 20

SERIES 591-19 ♦ ALL METAL 175° SEMI CONCEALED HINGE ♦ FOR WOODEN DOORS 19 – 22mm THICK ♦ RELEASABLE PIN ♦ FRONT TO BACK LATERAL ADJUSTMENT ♦ SCREW MOUNTED ♦ FIXING – 8g CSK SCREWS

CODE

150-1198

FINISH OPEN ANGLE

N.P 90°

MITRE HINGE ♦ ALL METAL FOR WOODEN DOORS 16 – 22mm THICK ♦ 45° MITRE ♦ FIXING – 6g CSK SCREWS ♦ PACK 1 – 10

CODE

150-1240

N.P 135° 150-1242

EXPOSED AXLE ♦ SEMI CONCEALED ♦ SINGLE DOOR TYPE 16-20mm ♦ INBUILT CATCH ♦ DOOR OVERLAY 13mm ♦ FLAT MOUNTING PLATE ♦ MAXIMISES CUPBOARD SPACE FOR DRAWERS, BASKETS ETC ♦ DOOR WIDTH MUST NOT EXCEED HEIGHT

FINISH PACK CODE

N.P 1 – 10 150-1308

BI-FOLD DOOR HINGE ♦ ALL METAL 180º HINGE ♦ FULLY CONCEALED

FINISH PACK CODE

N.P 1 – 10 150-1476

MINI FIX HINGE ♦ ALL METAL 95° HINGE ♦ FULLY CONCEALED WITH CATCH ♦ 26mm DRILLING FOR NARROW FRAME APPLICATIONS ♦ 6 WAY ADJUSTMENT ♦ FIXING – 6g CSK SCREWS

CRANK OVERLAY CODE

0 FULL 150-2000

8 HALF 150-2002

16 INSET 150-2004

199-7100 STEEL MOUNTING PLATE

EXPOSED AXLE ♦ ALL METAL 180º HINGE ♦ SEMI CONCEALED ♦ DOUBLE DOOR TYPE 16-20mm ♦ INBUILT CATCH ♦ FLAT MOUNTING ON FRAME

FINISH PACK CODE

N.P 1 – 10 150-1360

H

ING

E-F

IT P

TY

LT

D

2001

1.29




180° OPENING HINGE ♦ BODY – ZINC ALLOY BRASS PLATE ♦ ARM – STEEL BRASS PLATE

A B C D* GAP PACK CODE

10 10 16.5 2.0 2.5 1 – 48 150-3000

12 13.5 20.0 2.2 3.5 1 – 48 150-3002

14 15.5 23.0 3.0 3.0 1 – 24 150-3004

16 16.5 25.0 3.0 3.0 1 – 24 150-3006

18 18.0 27.0 3.0 3.0 1 – 24 150-3008

24 25.0 36.5 4.5 3.5 1 – 12 150-3010

* DISTANCE TO EDGE OF HOLE

SIZE FINISH CODE

4.76 BR 150-3148

CYLINDER HINGE ♦ SUIT JEWEL BOXES – LIGHT DUTY ♦ OPENS TO 90º ♦ SOLID BRASS CONSTRUCTION ♦ FIXING – PRESS FIT & GLUE ♦ DRILL HOLE 4.76 x 9.00mm

PACK

1 – 50

H

ING

E-F

IT P

TY

LT

D

2001

1.30




LEAF HINGE ♦ LIGHT DUTY ♦ OPENS TO 180° ♦ BODY – PLASTIC ♦ ARM – STEEL NICKEL PLATE ♦ MINIMUM DOOR THICKNESS 16mm

FINISH PACK CODE

33 x 11 WHITE 1 – 48 150-3514

33 x 11 BROWN 1 – 48 150-3516

SIZE

INVISIBLE HINGE ♦ OPENS TO 180º ♦ ZINC ALLOY BODY ♦ FINISH – E.BRASS PLATE

A B C DOOR PACK CODE

42.0 9.8 17.2 16 24 150-4000

44.5 13.0 21.5 19 – 26 24 150-4002

60.0 13.0 21.0 19 – 22 12 150-4004

70.0 15.8 27.2 22 – 26 4 150-4006

95.3 19.0 33.0 28 – 34 2 150-4008

117.5 25.4 44.1 35 – 38 2 150-4010

117.5 28.6 51.4 41 – 45 2 150-4012

A

B

C

B

A

C

H

ING

E-F

IT P

TY

LT

D

2001

1.31



HINGES – CABINET

FACE FIX HINGE ♦ SIDE ACTION HINGE ♦ IDEAL FOR INSPECTION FLAPS ♦ FIXING – 6g CSK SCREWS ♦ 180° OPENING ♦ PACK 1 – 50

L x W G FINISH CODE

50 x 21 1.2 B.S 140-0000

MEASUREMENT IS EACH FLAP

FANCY PIN HINGE ♦ REBATE TYPE ♦ STEEL ♦ PACK 1 – 50

LENGTH G FINISH CODE

38mm BODY 1.2 E.B 140-0060

OVERALL MEASUREMENT IS 60mm

HEAVY DUTY ROBE HINGE ♦ TOP + BOTTOM FACE FIX ♦ MAXIMUM 42mm DOOR ♦ PLATED STEEL ♦ HANDED ♦ PACK – 1 PAIR

DOOR G FINISH CODE

42mm 3 S.C.P 140-0092

H

ING

E-F

IT P

TY

LT

D

2001

1.32



HINGES – CABINET

L FINISH PACK CODE

50 N.P 1 – 100 140-1010

50 F.B 1 – 100 140-1012

SMALL BUTTERFLY ♦ 603 TYPE STEEL ♦ SURFACE MOUNTED ♦ FIXING – 4g CSK SCREWS

50 E.B 1 – 100 140-1014

x W

x 38

x 38

x 38

50 x 38 A.B 1 – 100 140-1016

L FINISH PACK CODE

59 N.P 1 – 100 140-1088

59 F.B 1 – 100 140-1090

LARGE BUTTERFLY ♦ 602 TYPE STEEL ♦ SURFACE MOUNTED ♦ FIXING – 4g CSK SCREWS

59 E.B 1 – 100 140-1092

x W

x 45

x 45

x 45

L FINISH PACK CODE

55 N.P STEEL 1 – 100 140-1200

55 N.P BRASS 1 – 100 140-1202

403 TYPE HINGE ♦ SURFACE MOUNTED ♦ FIXING – 4g CSK SCREWS

OFFSET

9.5

14.0

55 14.0 P.BRASS 1 – 100 140-1204

x W

x 31

x 31

x 31

L FINISH PACK CODE

65 P.BRASS 1 – 100 140-1300

65 P.BRASS 1 – 100 140-1302

401 TYPE HINGE ♦ SURFACE MOUNTED ♦ FIXING – 4g CSK SCREWS

OFFSET

FLUSH

9.5

65 9.5 N.P STEEL 1 – 100 140-1304

x W

x 32

x 32

x 32

288 SERIES HINGE ♦ SURFACE MOUNTED ♦ FIXING – 4g CSK SCREWS

L x W OFFSET FINISH PACK CODE

41 x 42 9.5 N.P STEEL 1 – 50 140-1392

38 x 53 9.5 P. BRASS 1 – 50 140-1394

FINISH PACK 16mm 18mm

N.P 1PR – 50PR 140-1002 140-1068

E.B 1PR – 50PR 140-1004 140-1070

209 TYPE HINGE ♦ STEEL SEMI CONCEALED ♦ TOP & BOTTOM FIXING ♦ HANDED ♦ FIXING – 5g CSK SCREWS

F.B 1PR – 50PR 140-1006 140-1072

251 TYPE HINGE ♦ STEEL SEMI CONCEALED ♦ FIXING – 4g CSK SCREWS

PIN LENGTH

REBATE FINISH PACK CODE

53 9.5 N.P 1 – 50 140-1178

53 9.5 F.B 1 – 50 140-1180


64 N.P STEEL 1 – 50 140-1202

64 P.BRASS 1 – 50 140-1204

601 TYPE HINGE ♦ SEMI CONCEALED 9.5mm REBATE DOOR ♦ FIXING – 4g CSK SCREWS

OFFSET

9.5

9.5

6010 TYPE HINGE ♦ SEMI CONCEALED ♦ FLAT LEAF ♦ FIXING – 4g CSK SCREWS


64 N.P STEEL 1 – 50 140-1290

64 P.BRASS 1 – 50 140-1292

REBATE TYPE HINGE ♦ SELF CLOSING SPRING ♦ ANTIQUE BRASS ON STEEL FINISH ♦ MATCHING SCREWS SUPPLIED ♦ SURFACE MOUNTED

L REBATE FINISH PACK CODE

70 9.5 A.B 1 – 50 140-0500

SELF CLOSING SPRING HINGE ♦ ANTIQUE BRASS ON STEEL FINISH ♦ MATCHING SCREWS SUPPLIED ♦ FLAT TYPE ♦ SURFACE MOUNTED

L FINISH PACK CODE

70 A.B 1 – 50 140-0400

H

ING

E-F

IT P

TY

LT

D

2001

1.33



HINGES – CABINET

L SCREW HOLES N.P E.B F.B B.S

25 2g 4 120-7000 120-7114 - 120-7550

25 2g 4 - 120-7116 - 120-7552

38 4g 4 - 120-7118 120-7330 120-7554

51 4g 4 - 120-7120 120-7332 120-7556

64 5g 6 - 120-7122 120-7334 120-7558

SPECIALS CAN BE MADE TO ORDER EG. NO HOLE VERSIONS

PACK

1 – 300

1 – 300

1 – 300

1 – 200

1 – 100

x W

x 16

x 22

x 26

x 32

x 36

LIGHT STEEL BUTT HINGE ♦ FOR FURNITURE & CABINETS ♦ COUNTERSUNK HOLES ♦ FIXED PIN ♦ OPENING ANGLE 180°+

REFLEX MIRROR HINGE ♦ N.PLATE FINISH ♦ FIXING – 4g SCREWS

L x W HAND PACK CODE

38 x 43 L.H 1 – 12 140-3272

38 x 43 R.H 1 – 12 140-3274

PERIOD CABINET HINGE ♦ SURFACE MOUNT ♦ FIXING – 6g CSK SCREWS ♦ PACK 1 – 20

L x W FINISH CODE

97 x 40 P.B 140-2002

FANCY CABINET HINGE ♦ SURFACE MOUNT ♦ FIXING – 4g CSK SCREWS ♦ 10mm OFFSET ♦ PACK 1 – 20

FINISH CODE

57 x 40 P.B 140-0698

L x W

EASY ON HINGE ♦ CONCEALED STEEL HINGE WITH CATCH ♦ SURFACE MOUNT ♦ FIXING – 4g PAN HEAD SCREWS

L x W FINISH PACK CODE

104 x 43 Z.P 1 – 50 140-3600

H

ING

E-F

IT P

TY

LT

D

2001

1.34



HINGES – CABINET

13/25 TYPE HINGE ♦ NON HANDED ♦ PLATED STEEL ♦ EDGE FIXING FOR DOOR 32mm THICK ♦ FIXING – 4g CSK SCREWS

PIN L. FINISH PACK CODE

51 E.B 1 – 50 140-5564

51 F.B 1 – 50 140-5566

FINISH PACK 25mm 32mm

E.B 1PR – 20PR 140-4000 140-4086

F.B 1PR – 20PR 140-4002 140-4088

24 TYPE ROBE DOOR HINGE ♦ TOP & BOTTOM FACE FIX FOR 25 & 32mm DOORS ♦ PLATED STEEL ♦ HANDED ♦ FIXING – 8g CSK SCREWS

S.C.P 1PR – 20PR 140-4004 140-4090

PIN L. PACK CODE

64 1 – 50 140-4206

64 1 – 50 140-4208

ANGLE BUTT HINGE ♦ PLATED STEEL 592 TYPE FOR 19mm OVERLAY DOORS ♦ EDGE FIX ♦ NON HANDED ♦ FIXING – 4g CSK SCREWS

FINISH

E.B

F.B

64 Z.P 1 – 50 140-4210

PIN L. PACK CODE

64 1 – 50 140-5008

64 1 – 50 140-5010

REVERSE ANGLE BUTT HINGE ♦ PLATED STEEL 594 TYPE FOR INSET DOOR ♦ SUIT 19mm DOOR THICKNESS ♦ NON-HANDED ♦ FIXING – 4g CSK SCREWS

FINISH

E.B

F.B

64 Z.P 1 – 50 140-5012

13/13 TYPE HINGE ♦ EDGE FIXING FOR DOOR 28mm THICK ♦ PLATED STEEL ♦ NON-HANDED ♦ FIXING – 4g CSK SCREWS

PIN L. FINISH PACK CODE

51 E.B 1 – 50 140-5100

51 F.B 1 – 50 140-5102

H

ING

E-F

IT P

TY

LT

D

2001

1.35



HINGES – CABINET


50 E.B 1 – 200 140-5710

50 F.B 1 – 200 140-5712

SERIES 204 ♦ SEMI CONCEALED STEEL HINGE ♦ 10mm REBATE DOORS ♦ FIXING – 4g CSK SCREWS


50 E.B 1 – 200 140-5764

50 F.B 1 – 200 140-5766

SERIES 204F ♦ SEMI CONCEALED STEEL HINGE ♦ FIXING – 4g CSK SCREWS

SERIES 206 ♦ SEMI CONCEALED STEEL HINGE ♦ 10mm REBATE DOORS ♦ FIXING – 5g CSK SCREWS


65 N.P 1 – 100 140-5798


80 E.B 50 – 500 140-5664

80 F.B 50 – 500 140-5666

SERIES T1500 ♦ CARAVAN & CABINET STEEL HINGE ♦ FOR REBATE DOOR ♦ HARDENED DRAWN WIRE PIN 2.8mm ♦ FIXING – 4g CSK SCREWS


80 E.B 50 – 500 140-5600

80 F.B 50 – 500 140-5602

80 N.P 50 – 500 140-5604

SERIES T1500/F ♦ CARAVAN & CABINET STEEL HINGE ♦ SURFACE MOUNT ♦ HARDENED DRAWN WIRE PIN 2.8mm ♦ FIXING – 4g CSK SCREWS

H

ING

E-F

IT P

TY

LT

D

2001

1.36



HINGES – CABINET

SMALL BOX HINGE ♦ STEEL ♦ FIXING – 1g CSK SCREWS


20 x 15 E.B 1 – 50 142-0250

24 x 19 E.B 1 – 50 142-0252

H TYPE HINGE ♦ SOLID BRASS ♦ SURFACE MOUNT ♦ FIXING – 4g CSK SCREWS

L x W x C FINISH PACK CODE

52 x 30 x 11 P.B 1 – 20 142-0228

STAR BUTT HINGE ♦ SOLID BRASS ♦ SURFACE FIX ♦ FIXING – 4g CSK SCREWS

L x W x PIN FINISH PACK CODE

77 x 43 x 25 BR 1 – 50 142-0302

H

ING

E-F

IT P

TY

LT

D

2001

1.37



HINGES – BOX

JEWEL BOX HINGE ♦ SOLID BRASS ♦ 6mm KNUCKLES ♦ FIXING – 2g SCREWS OR PINS ♦ PACK 1 – 20

L x W PIN DIA. HOLES CODE

38 x 13 2.0 4 142-0004

50 x 14 2.0 6 142-0006

80 x 13 2.0 6 142-0008

102 x 16 2.0 6 142-0010

WITH 90º STOP

115 x 9 2.0 6 142-0100

200 x 10 2.0 8 142-0102

QUADRANT HINGE ♦ SOLID BRASS ♦ USED ON SMALL BOX LIDS ♦ STAY AND HINGE COMBINED ♦ FIXING – 4g CSK SCREWS


40 x 30 BR 1 – 12 142-0390

55 x 30 BR 1 – 12 142-0392

C

PLAYGROUND HINGE ♦ STEEL ZINC PLATE ♦ FIXING – 4g SCREWS ♦ PACK 1 – 50

L G HOLES TYPE CODE

74 1.2 4 PUNCHED 172-0900

117 1.6 4 CSK 172-0902

x W

x 28

x 19

H

ING

E-F

IT P

TY

LT

D

2001

1.38



HINGES – CABINET

ICE BOX HINGE ♦ SURFACE MOUNT ♦ FIXING – 4g CSK SCREWS


49 x 92 P.B 1 – 12 142-0416

ICE BOX HINGE OFFSET ♦ 9.5mm OFFSET ♦ FIXING – 4g CSK SCREWS


49 x 96 P.B 1 – 12 142-0442

WIDE & NARROW HINGE ♦ STEEL ♦ FLAT OR REBATE ♦ FIXING – 4g SCREWS


FLAT TYPE

38 x 44 N.P 1 – 50 142-0500

50 x 31 N.P 1 – 50 142-0502

OFFSET HINGE ♦ PLATED STEEL ♦ SUITED FOR 12-18mm DOORS ♦ FIX TO EDGE AND BACK WITH 4g CSK SCREWS


N.P 1 – 50 142-0544 38

172-0902

172-0900

142-0500

H

ING

E-F

IT P

TY

LT

D

2001

1.39



HINGES – CABINET

CABINET STRAP HINGE ♦ SURFACE FIX ♦ COUNTERSUNK SCREWS

L x C x W FINISH PACK CODE

63 x 16 x 21 P.B 1 – 10 140-0600

75 x 21 x 25 P.B 1 – 10 140-0602

100 x 30 x 32 P.B 1 – 10 140-0604

150 x 35 x 40 P.B 1 – 10 140-0606

FANCY BOX HINGE ♦ SURFACE MOUNT ♦ FIXING – 4g CSK SCREWS

L FINISH PACK CODE

16 E.B 1 – 50 142-0600

W

46

x

x

FANCY LEAF HINGE ♦ SURFACE MOUNT ♦ FIXING – 4g CSK SCREWS

L FINISH PACK CODE

19 BR 1 – 50 140-0512

W

48

x

x

MEXICAN HINGE ♦ SURFACE MOUNT ♦ FIXING – 5g CSK SCREWS

L FINISH PACK CODE

53 BLK 1 – 50 140-0550

W

44

x

x

MEXICAN STRAP HINGE ♦ SURFACE MOUNT ♦ FIXING – 5g CSK SCREWS

L FINISH PACK CODE

110 BLK 1 – 20 140-0720

W

30

x

x

MEXICAN SNAKE HINGE ♦ SURFACE MOUNT ♦ FIXING – 5g CSK SCREWS

L FINISH PACK CODE

90 BLK 1 – 20 140-0744

W

60

x

x

C L

FINISH PACK CODE

N.P 1 – 10 170-3400

SELF SUPPORTING HINGE ♦ ALL METAL ♦ FOR FOLD DOWN LIDS AND SEWING MACHINE TABLE FLAPS ♦ OPENS TO 180° ♦ RECESS INTO BOARD 2mm ♦ OPEN DIMENSION 65 x 30mm ♦ FIXING – 4g CSK SCREWS

P.B 1 – 10 170-3402

FINISH PACK CODE

N.P 1 – 20 170-3452

F.B 1 – 20 170-3454

FLAP HINGE ♦ ALL METAL ♦ DRILLING 35mm ♦ 3 WAY ADJUSTABLE ♦ VERTICAL ADJUSTMENT 2mm UP, 1mm DOWN ♦ FIXING – 4g CSK SCREWS

FINISH PACK CODE

C.P / WHITE 1 – 20 170-3506

E.B / BROWN 1 – 20 170-3506

FLAP HINGE ♦ ZINC ALLOY AND PLASTIC ♦ DRILLING 30mm ♦ FIXING – 4g CSK SCREWS

FLAP HINGE ♦ ALL METAL ♦ OPENING ANGLE 290º ♦ OPEN DIMENSION 78 x 31mm ♦ SURFACE FIX ♦ FIXING – 8g CSK SCREWS

FINISH PACK CODE

N.P 1 – 20 170-3520 H

ING

E-F

IT P

TY

LT

D

2001

1.40



HINGES – FLAP

GLASS DOOR HINGE PIVOT GLASS HINGE FOR UP TO 5mm THICK GLASS. SET COMPRISES ♦ 1 UPPER STEEL HINGE ♦ 1 LOWER STEEL HINGE ♦ 2 PRESSURE PLATES ♦ 2 PLASTIC BUSHINGS ♦ 4 SCREWS IN POLY BAG

DESC. FINISH CODE

DOOR HINGE SET BLK 182-0060

TOP SUPPORT BRACKET

BLK 198-6000

USE SUPPORT BRACKET IF NO TOP OR BOTTOM MOUNTING IS AVAILABLE

FINISH CODE

BLACK 198-6008

SINGLE MAGNETIC TOUCH LATCH ♦ SUITABLE FOR GLASS AND TIMBER DOORS ♦ 32mm HOLE CENTRES ♦ PACK 1 – 12

FINISH CODE

F.B 198-6056

METAL PLATE ♦ FOR WOODEN DOORS ♦ USE WITH MAGNETIC CATCHES

FINISH CODE

BLACK 198-6020

DOUBLE MAGNETIC TOUCH LATCH ♦ SUITABLE FOR GLASS AND TIMBER DOORS ♦ 32mm HOLE CENTRES ♦ PACK 1 – 12

BUSH DRILLING 9mm DIA. DEPTH 7mm

H

ING

E-F

IT P

TY

LT

D

2001

1.41



HINGES – GLASS DOOR ACCESSORIES

U-CHANNEL ♦ TOUCH PLATE 40 x 23 ♦ SELF ADHESIVE RUBBER HOLDS PLATE ♦ FOR GLASS UP TO 6.35mm THICKNESS ♦ PACK 1 – 12

FINISH PLAIN GRIPPER

N.P 198-7040 198-7084

BLK 198-7042 198-7086

B.P 198-7044 198-7088

H

ING

E-F

IT P

TY

LT

D

2001

1.42



HINGES – GLASS DOOR

GLASS DOOR HINGE ♦ CLIP ON ♦ PLASTIC BOSS AND METAL SPRING ♦ SUITED FOR 4 – 6mm GLASS ♦ DRILL A 26mm HOLE 5.5mm FROM EDGE OF GLASS ♦ OPENING ANGLE 95° ♦ BLACK BOSS AND N.P STEEL ARM ♦ SCREW MOUNTED

DESC. PACK CODE

SINGLE OVERLAY 1 – 12 182-0144

8mm HALF OVERLAY 1 – 12 182-0146

MOUNTING PLATE 1 – 12 199-6000

PLASTIC COVER PLATES ♦ FOR 26mm GLASS DOOR HINGE ♦ INCLUDES FIXING SCREWS

DESC. PACK CODE

31mm BRASS POLISHED 1 – 12 198-7170

31mm NICKEL POLISHED 1 – 12 198-7172

GLASS DOOR HINGE ♦ METAL CLAMP TYPE WITH CATCH ♦ NO GLASS DRILLING REQUIRED ♦ MAXIMUM 6mm GLASS ♦ PLASTIC ADJUSTABLE SET SCREW ♦ FRONT PLATE [H x W] 32 x 41mm ♦ PACK 1 – 12

DESC. OVERLAY INSET

GOLD FINISH 182-0800 182-0886

NICKEL MATT 182-0802 182-0888

HANDLES TO SUIT GLASS DOOR HINGE ♦ NO GLASS DRILLING REQUIRED ♦ MAXIMUM 6mm GLASS ♦ CAST METAL

DESC. PACK CODE

GOLD FINISH 1 – 12 198-7204

NICKEL PLATE 1 – 12 198-7204

INSET

OVERLAY

WALL MOUNT HINGE ♦ FULL BACK PLATE ♦ 90º MOVEMENT ♦ GLASS SIZE 6mm TO 8mm ♦ MAX. CAP. 30Kg ♦ MAX. DOOR WIDTH 800mm ♦ BRASS CONSTRUCTION ♦ PACK – 2

FINISH A B

C.P 182-2000 182-2104

G.P 182-2002 182-2106

S.C.P 182-2004 182-2108

ANGLED 90° GLASS TO GLASS HINGE ♦ 90º IN 90º OUT° MOVEMENT ♦ GLASS SIZE 6mm TO 8mm ♦ MAX. CAP. 30Kg ♦ MAX. DOOR WIDTH 800mm ♦ BRASS CONSTRUCTION

FINISH PACK CODE

C.P 2 182-2444

G.P 2 182-2446

S.C.P 2 182-2448

90° GLASS TO GLASS HINGE ♦ 90º IN 90º OUT MOVEMENT ♦ GLASS SIZE 6mm TO 8mm ♦ MAX. CAP. 30Kg ♦ MAX. DOOR WIDTH 800mm ♦ BRASS CONSTRUCTION

FINISH PACK CODE

C.P 2 182-2300

G.P 2 182-2302

S.C.P 2 182-2304

180° GLASS TO GLASS HINGE ♦ 180º IN 180º OUT MOVEMENT ♦ GLASS SIZE 6mm TO 8mm ♦ MAX. CAP. 30Kg ♦ MAX. DOOR WIDTH 800mm ♦ BRASS CONSTRUCTION

FINISH PACK CODE

C.P 2 182-2220

G.P 2 182-2222

S.C.P 2 182-2224

H

ING

E-F

IT P

TY

LT

D

2001

1.43



HINGES – SHOWER DOOR

GLASS TO GLASS

CUT OUT

WALL MOUNT GLASS

CUT OUT

MEASURE STRAP HINGES FROM KNUCKLE TO END


75 B.Z 2 – 20 132-2020

100 B.Z 2 – 20 132-2022

150 B.Z 2 – 20 132-2024

200 B.Z 2 – 20 132-2026

MEDIUM DUTY STRAP HINGE ♦ PLATED STEEL – 3 KNUCKLE ♦ IMPORTED ♦ COUNTERSUNK HOLES

FANCY STRAP HINGE ♦ 4 KNUCKLE ♦ MEDIUM DUTY ♦ AUSTRALIAN MADE STEEL OR BRASS ♦ 6 COUNTERSUNK HOLES 4g


75 B.Z 50 132-2300

75* P.B 1 – 20 132-2302

* 6g SCREWS


100 B.Z 2 – 20 134-1300

150 B.Z 2 – 20 134-1302

200 B.Z 2 – 20 134-1304

TEE HINGE – MEDIUM ♦ PLATED STEEL ♦ COUNTERSUNK HOLES


150 GAL 10 134-2044

275 GAL 10 134-2046

300 GAL 10 134-2048

TEE HINGE – HEAVY ♦ PLATED STEEL ♦ BRASS PIN ♦ COUNTERSUNK HOLES


75 P.B 1 – 20 134-1032

POL BRASS TEE HINGE ♦ COUNTERSUNK HOLES ♦ FIXING – 6g SCREWS ♦ DESIGNED FOR BOXES AND LIGHT CABINETS

H

ING

E-F

IT P

TY

LT

D

2001

1.44



HINGES – STRAP / TEE

MEASURE TEE HINGES FROM KNUCKLE TO END

STRAP HINGE ♦ POLISHED STAINLESS STEEL ♦ FIXING – 10g CSK SCREWS ♦ 4mm SECTION

L PACK CODE

155 1 – 10 132-6000

x W

x 27


L PACK CODE

73 1 – 10 132-6092

x W

x 36


L PACK CODE

104 1 – 10 132-6138

x W

x 36


L PACK CODE

103 1 – 10 132-6170

x W

x 27

HIN

GE

-FIT

PT

Y L

TD

2001

1.45



HINGES – STAINLESS STEEL STRAP


L PACK CODE

141 1 – 10 132-6206

x W

x 40

SECURITY GATE HINGE ♦ SERIES 2000 ♦ HEAVY DUTY STEEL CONSTRUCTION ♦ TIMBER TO STEEL OR STEEL TO TIMBER ♦ GATES MUST BE 45° TO POST FOR LIFT-OFF ACTION ♦ CANNOT BE REMOVED WHEN GATE IS IN CLOSED POSITION

HAND FINISH PACK CODE

L.H Z.P 2 – 10 130-0400

R.H Z.P 2 – 10 130-0402

ECONOMY ( NON SECURITY ) ♦ GATES CAN BE REMOVED IN ANY POSITION

L.H Z.P 2 – 10 130-0636

R.H Z.P 2 – 10 130-0638

SECURITY GATE HINGE ♦ SERIES 2100 ♦ HEAVY DUTY STEEL CONSTRUCTION ♦ TIMBER TO STEEL OR STEEL TO STEEL ♦ GATES MUST BE 45° TO POST FOR LIFT-OFF ACTION ♦ CANNOT BE REMOVED WHEN GATE IS IN CLOSED POSITION


L.H Z.P 2 – 10 130-1000

R.H Z.P 2 – 10 130-1002

ECONOMY ( NON SECURITY ) ♦ GATES CAN BE REMOVED IN ANY POSITION

L.H Z.P 2 – 10 130-1130

R.H Z.P 2 – 10 130-1132

DOUBLE BUTT HINGE ♦ SERIES 2200 HEAVY DUTY STEEL ♦ SECURITY TYPE ♦ PANELS MUST BE 45º FOR LIFT OFF ACTION ♦ CANNOT BE REMOVED WHEN GATE IS IN CLOSED POSITION


L.H Z.P 2 – 10 130-1200

R.H Z.P 2 – 10 130-1202

L.H Z.P 2 – 10 130-1266

R.H Z.P 2 – 10 130-1268

ECONOMY ( NON SECURITY )

H

ING

E-F

IT P

TY

LT

D

2001

1.46



HINGES – GATE

MOCK GATE HINGE ♦ CAST METAL ♦ SURFACE FIX TO GATE OR DOOR


395 x 146 BLACK 2 130-2000

40

115

88

R.H

L.H

88

270

50

40

330

50

26

ADJUSTABLE TENSION HINGE ♦ UV STABLE MATERIAL GLASS FILLED POLYMER ♦ NON-CORROSIVE ♦ HOLDS GATE/DOOR CLOSED

♦ FLUSH MOUNTING ♦ BLACK FINISH ♦ FIXING – SCREW OR BOLT

DESC. CAPACITY* L HOLE DIA. PACK

STANDARD 25 Kg 90 x 66 4 6.0 2

HEAVY DUTY 60 Kg 125 x 120 6 6.8 2

HEAVY DUTY WITH RETURN LEG 60 Kg 125 x 120 6 6.8 2

* LOAD RATING PER PAIR [APPROXIMATE]

x W HOLES CODE

130-2100

130-2102

130-2104

BARREL, BALL , CLIP & PIN SET ♦ ALLOWS FABRICATION OF OWN STRAPS AND BUTTS

TO SUIT SITE REQUIREMENTS ♦ EXTRA HEAVY DUTY ♦ NON-HANDED ♦ 150 x 30mm


NON Z.P 2 199-7200

HAND PACK CODE

LEFT 1 PR 130-2232

EXTRA HEAVY DUTY GATE HINGE ♦ BUTT 150mm ♦ STRAP 350 x 75mm ♦ BALL BEARING TYPE ♦ 5mm STEEL PLATE

FINISH

Z.P

RIGHT Z.P 1 PR 130-2234

GATE LATCH ♦ USE WITH ADJUSTABLE TENSION HINGE ♦ OFFERS CHILD RESISTANCE TO POTENTIALLY

DANGEROUS AREAS ♦ LOCKABLE ♦ BLACK FINISH ♦ FIXING SCREWS SUPPLIED

ACCESS SECURITY CODE

TOP LOCKABLE 199-7162

H

ING

E-F

IT P

TY

LT

D

2001

1.47



HINGES – GATE

LEFT HAND

365mm

150m

m

30mm

150m

m

130-2102 130-2100

STEEL LIFT–OFF HINGE ♦ PACK 1 – 100

HAND L x W G PIN L PIN SCREWS FIN. CODE

L.H 51 x 36 1.2 25 3.2 4g¹ E.B 160-0100

R.H 51 x 36 1.2 25 3.2 4g¹ E.B 160-0102

L.H 64 x 42 1.6 32 6.0 5.0² Z.P 160-0104

R.H 64 x 42 1.6 32 6.0 5.0² Z.P 160-0106

L.H 76 x 76 1.6 38 6.0 6.0² Z.P 160-0108

R.H 76 x 76 1.6 38 6.0 6.0² Z.P 160-0110

L.H 100 x 76 1.6 12 5.0 8g¹ Z.P 160-0112

R.H 100 x 76 1.6 12 5.0 8g¹ Z.P 160-0114

HOLES

6

6

4

4

6

6

8

8

ALL MEASUREMENTS ARE IN MILLIMETERS UNLESS SPECIFIED ¹ COUNTERSUNK HOLES ² PUNCHED HOLES

L = LENGTH W = OPEN WIDTH

ROUND CORNERS LIFT–OFF HINGE ♦ STEEL PLATED ♦ PACK 1 – 20

HAND L x W G PIN L PIN HOLES SCREWS FIN. CODE

L.H 89 x 57 1.6 16 5.5 6 8g¹ Z.P 160-0500

R.H 89 x 57 1.6 16 5.5 6 8g¹ Z.P 160-0502

L.H 89 x 57 1.6 16 5.5 6 8g¹ C.P 160-0504

R.H 89 x 57 1.6 16 5.5 6 8g¹ C.P 160-0506

ALUMINIUM LIFT–OFF HINGE ♦ T6 ALLOY ♦ S.S PIN ♦ 14mm BARREL ♦ PACK 1 – 6


L.H 102 x 49 3.1 16 4.7 6 8g¹ AL 160-0580

R.H 102 x 49 3.1 16 4.7 6 8g¹ AL 160-0582

H

ING

E-F

IT P

TY

LT

D

2001

1.48



HINGES – LIFT-OFF

160-0106 160-0108

STAINLESS STEEL LIFT–OFF HINGE ♦ STAINLESS STEEL UNDRILLED ( 50 & 75mm SIZES ) ♦ PACK – 2


L.H 50 x 44 2.0 25 4.7 - - S.S 160-1000

R.H 50 x 44 2.0 25 4.7 - - S.S 160-1002

L.H 75 x 50 2.0 37 4.7 - - S.S 160-1004

R.H 75 x 50 2.0 37 4.7 - - S.S 160-1006

L.H 100 x 75 2.0 15 6 8 8g S.S 160-1008

R.H 100 x 75 2.0 15 6 8 8g S.S 160-1010

POLISHED BRASS LIFT–OFF HINGE ♦ POLISHED BRASS Z.P PIN ♦ PACK – 2


L.H 63 x 45 2.0 31 4.7 6 6g¹ P.B 160-1260

R.H 63 x 45 2.0 31 4.7 6 6g¹ P.B 160-1262

L.H 102 x 55 2.5 23 6 6 8g P.B 160-1264

R.H 102 x 55 2.5 23 6 6 8g P.B 160-1266

ALLOY LIFT-OFF HINGE ♦ CHECK IN WITH ROUTER ♦ PACK 2 – 20


L.H 74 x 66 - 12 7 6 10g ALLOY 160-1304

R.H 74 x 66 - 12 7 6 10g ALLOY 160-1306

H

ING

E-F

IT P

TY

LT

D

2001

1.49



HINGES – LIFT-OFF

ALL MEASUREMENTS ARE IN MILLIMETERS UNLESS SPECIFIED ¹ COUNTERSUNK HOLES ² PUNCHED HOLES

L = LENGTH W = OPEN WIDTH

SPECIAL TYPE 160-1010

160-1304 160-1262

20

100

H

ING

E-F

IT P

TY

LT

D

2001

1.50



HINGES – LIFT-OFF

BRASS LIFT-OFF HINGE ♦ FINIAL FEATURE ♦ FIXING – 10g CSK SCREWS ♦ POLISHED BRASS FINISH ♦ HANDED ♦ OVERALL HEIGHT WITH FINIALS 165mm

L HAND PACK CODE

100 L.H 2 160-1500

100 R.H 2 160-1502

x W

x 67

x 67

BARREL HINGE ♦ HEAVY DUTY STEEL ♦ BALL BEARING TYPE ♦ NON HANDED ♦ SUBJECT TO MINIMUM QUANTITY

FINISH HAND FIX CODE

Z.P - WELD 100-0030

REFLEX HINGE ♦ FRENCH STYLE FINIAL ♦ BRASS BODY – STEEL PIN

L x W FINISH HAND PACK CODE

112 x 42 A.B L.H 1 – 10 160-4600

112 x 42 A.B R.H 1 – 10 160-4602

REFLEX HINGE ♦ FRENCH STYLE FINIAL ♦ NON HANDED ♦ BRASS BODY – STEEL PIN


136 x 27 A.B 1 – 10 160-4660

170 x 38 A.B 1 – 10 160-4662

H

ING

E-F

IT P

TY

LT

D

2001

1.51



HINGES – PIN TYPE LIFT-OFF

WELDING TYPE ♦ FIXED PIN – LIFT OFF ♦ RAW STEEL AND STAINLESS STEEL ♦ PACK 2 – 10

L x W x H PIN PIN L. FIN. CODE

60 x 11.5 x 10 6.0 17 M.S 160-3200

80 x 14.0 x 12 8.0 22 M.S 160-3202

100 x 18.5 x 16 10.0 30 M.S 160-3204

60 x 11.5 x 10 6.0 17 S.S 160-3206

80 x 14.0 x 12 8.0 22 S.S 160-3208

100 x 18.5 x 16 10.0 30 S.S 160-3210

FLAT TYPE ZINC ♦ STAINLESS STEEL PIN ♦ CHROME PLATED ♦ FRONT FIX ♦ PACK – 1 PAIR

L x W PIN HAND HOLES CODE

76 x 56 6.4 L.H 4 160-3110

76 x 56 6.4 R.H 4 160-3112

PIN TYPE ZINC ♦ STAINLESS STEEL PIN ♦ CHROME PLATE ♦ REAR FIX ♦ ROUNDED ENDS ♦ PACK – 1 PAIR

L x W x H PIN HAND HOLES CODE

51 x 8 x 9.5 4.0 L.H 4.0 160-3050

102 x 16 x 19 9.5 R.H 6.35 160-3052

PIN TYPE BRASS ♦ STAINLESS STEEL PIN ♦ CHROME PLATED ♦ REAR FIX ♦ PACK 1 – 10

L x W x H PIN ENDS HOLES CODE

82 x 12 x 16 6.0 FLAT 6.0 160-3002

82 x 12 x 19 6.0 FLAT 6.0 160-3004

102 x 12 x 16 6.3 RND 6.3 160-3006

DOOR

57

H

ING

E-F

IT P

TY

LT

D

2001

1.52



HINGES – STEEL CASE

MINI SWIVEL HINGE 90° STOP ♦ 1260 SERIES ♦ MATERIAL STEEL N.PLATE FINISH ♦ PACK 1 – 50 ♦ CODE 142-0610

LIGHT DUTY LIFT OFF HINGE ♦ 645 SERIES ♦ MATERIAL STEEL N.PLATE FINISH ♦ PACK 1 – 50 ♦ CODE 160-4004

MEDIUM DUTY LIFT OFF HINGE ♦ 625 SERIES ♦ MATERIAL STEEL Z.PLATE FINISH ♦ PACK 1 – 50 ♦ CODE 160-4050

HEAVY DUTY CASE HINGE ♦ 610 SERIES ♦ MATERIAL STEEL N.PLATE FINISH ♦ PACK 1 – 50 ♦ CODE 142-0650

HINGE STOP ♦ USE WITH 610 SERIES OR PIANO HINGE ♦ MATERIAL STEEL N.PLATE FINISH ♦ PACK 1 – 50 ♦ CODE 199-7250

STRUT HINGE ♦ 1325 SERIES ♦ MATERIAL STEEL N.P FINISH ♦ PACK 1 – 50 ♦ CODE 142-0700

STRUT HINGE ♦ 1945 SERIES ♦ MATERIAL STEEL N.PLATE FINISH ♦ PACK 1 – 50 ♦ CODE 142-0710

STRUT HINGE ♦ 1980 SERIES ♦ MATERIAL STEEL N.PLATE FINISH ♦ PACK 1 – 50 ♦ CODE 142-0720

38

41

44

80

17.5

51

17.5

87

36

21

44

104

45

46

41

H

ING

E-F

IT P

TY

LT

D

2001

2.01



SHOPFITTINGS – STRIPPING & BRACKETS

DESC. PACK CODE

DOUBLE 1 – 50 290-0050

CENTRE CLIP ♦ CLEAR PLASTIC ♦ FIXING – 10g PAN SCREWS

DESC. PACK CODE

GROMET 1 – 100 290-0100

GROMET ♦ FOR GLASS SHELVES ♦ CLEAR PLASTIC

DESC. PACK CODE

SINGLE 1 – 100 290-0000

END CLIP ♦ CLEAR PLASTIC ♦ FIXING – 10g PAN SCREWS

COMMERCIAL STRIPPING ♦ SINGLE SLOT STEEL 40mm PITCH ♦ 20 x 13 SECTION ♦ SPECIAL COLOURS TO ORDER – MINIMUM QTY MAY APPLY

SIZE PACK CHROME WHITE

600 1 – 10 210-0012 210-0048

900 1 – 10 210-0014 210-0050

1200 1 – 10 210-0016 210-0052

1500 1 – 10 210-0018 210-0054

1800 1 – 10 210-0020 210-0056

2100 1 – 10 210-0022 210-0058

2400 1 – 10 210-0024 210-0060

COMMERCIAL STRIPPING ♦ DOUBLE SLOT STEEL 40mm PITCH ♦ 32 x 13 SECTION


1800 1 – 10 210-0100 210-0124

2100 1 – 10 210-0102 210-0126

2400 1 – 10 210-0104 210-0128


100 1 – 25 220-0002 220-0050

150 1 – 25 220-0004 220-0052

200 1 – 25 220-0006 220-0054

250 1 – 25 220-0008 220-0056

300 1 – 25 220-0010 220-0058

350 1 – 25 220-0012 220-0060

400 1 – 25 220-0014 220-0062

450 1 – 25 220-0016 220-0064

500 1 – 25 220-0018 220-0066

550 1 – 25 220-0020 -

STEEL SHELF BRACKETS ♦ SUITS SINGLE AND DOUBLE STRIPPING ♦ SPECIAL COLOURS TO ORDER ♦ – MINIMUM QTY MAY APPLY

600 1 – 25 220-0022 -

H

ING

E-F

IT P

TY

LT

D

2001

2.02



SHOPFITTINGS – HARDWARE

PEGBOARD HOOKS ♦ CHROME FINISH ♦ PACK 1 – 10

LIGHT DUTY

SIZE SINGLE PRONG DOUBLE PRONG

50 250-0300 -

75 250-0302 -

100 250-0304 -

150 250-0306 250-0506

200 250-0308 250-0508

250 250-0310 -

HEAVY DUTY

100 250-0440 -

150 250-0442 -

200 250-0444 -

250 250-0446 -

300 250-0448 -

STEEL ADAPTOR ♦ 3-WAY ADAPTOR FOR HOOKS, BRACKETS &ARMS ENABLING

CONVENTIONAL HARDWARE TO BE USED ON GROOVED WALLBOARD

♦ 40mm PITCH

PACK CHROME POWDER COAT

1 – 50 290-0706 290-0720

HANGING RAIL BRACKETS ♦ FOR 25mm CHROME TUBE ♦ STEEL – CHROME FINISH

SIZE SLOT TYPE

300 220-0366

350 220-0368

400 220-0370

CHROME PLATED STEEL TUBE

SIZE PACK CODE

25 x 3600 1 – 10 634-0010

H

ING

E-F

IT P

TY

LT

D

2001

3.01



TOILET PARTITION – HARDWARE

LIFT OFF HINGE

NOVO RANGE ♦ REMOVABLE SPRING HINGE ♦ HANDED ♦ MATERIAL – ZINC DIECAST, S/STEEL PIN

♦ FIXING – 8g CSK SCREWS ♦ FINISH – SATIN CHROME ♦ PACK – 1

TYPE CODE

INDICATOR SET 320-0022

BUMPER ONLY 320-0024

COAT HOOK 320-0026

TYPE CODE

COMPLETE KIT L.H HOLD OPEN

320-0130

COMPLETE KIT L.H HOLD CLOSE

320-0132

COMPLETE KIT R.H HOLD OPEN

320-0134

COMPLETE KIT R.H HOLD CLOSE

320-0136

LIFT OFF HINGES CODE

L.H HOLD OPEN 310-0000

R.H HOLD OPEN 310-0002

L.H HOLD CLOSED 310-0004

R.H HOLD CLOSED 310-0006

ARCHITECTURAL QUALITY PARTITION HARDWARE THAT ALLOWS THE DOOR TO BE LIFTED OFF WITHOUT ANY TOOLS. IDEAL FOR SENIOR CITIZENS HOMES, SCHOOLS AND PUBLIC BUILDINGS.

76

INDICATOR BOLT & BUMPER

COAT HOOK

DOORLATCH & HOOK

86 60

30

19 29

80

70 29

37 11

31

44

3

90

53

90

43 31

29.5

30

11

21

3 37

H

ING

E-F

IT P

TY

LT

D

2001

3.02



TOILET PARTITION – HARDWARE

INDICATING BOLT ♦ SUITABLE FOR TOILET PARTITIONS, CHANGEROOMS ETC. ♦ ZINC MACHINE CAST ♦ SURFACE MOUNTED BOLT AND INDICATOR ♦ FIXING – 6g CSK

FINISH PACK CODE

SATIN 1 – 6 320-0200

DOOR BUMPER ♦ FACE FIX – BOLT ♦ EDGE FIX – 6g CSK ♦ PACK 1 – 6

TYPE FINISH FACE FIX EDGE FIX

HEAVY DUTY 320-0260 -

320-0262 320-0296

FIXING BOLTS NOT INCLUDED WITH BUMPERS

MEDIUM DUTY S.S

BRASS S.C.P

DOOR STOP AND HOOK ♦ DIECAST WITH RUBBER TIP ♦ FIXING – 6g CSK SCREWS ♦ PROJECTION – 85mm

DESC FINISH PACK CODE

DOOR STOP S.C.P 1 – 10 320-1008

DOOR STOP C.P 1 – 10 320-1010

DOOR BUMP & HOOK ♦ STAINLESS STEEL ♦ LIGHT/MEDIUM DUTY ♦ FIXING – 8g CSK SCREWS


71 x 83 SATIN 1 – 10 320-1032

H

ING

E-F

IT P

TY

LT

D

2001

3.03



TOILET PARTITION – GRAVITY HINGES

STAINLESS STEEL GRAVITY HINGES ♦ LIFT OFF TYPE WITH SELF LUBE CENTRE BUSH ♦ LENGTH 90 x WIDTH 80mm ♦ THICKNESS 2.5 ♦ MAX DOOR WEIGHT 35Kg ♦ PACK – 1PR ♦ FINISH – SATIN

HAND HOLD SCREW BOLT

LH OPEN 90º 310-0112 310-0200

RH OPEN 90º 310-0114 310-0202

LH CLOSED 310-0116 310-0204

RH CLOSED 310-0118 310-0206

A SPECIAL EDGE FIX 90º VERSION WHERE ONLY THE HINGE BARREL IS SEEN IS AVAILABLE ON SPECIAL ORDER

STAINLESS STEEL SPRING HINGE ♦ NON HANDED ♦ ADJUSTABLE TENSION ♦ CAPACITY 30Kg ♦ BARREL LENGTH 93mm ♦ PACK – 2 ♦ FINISH SATIN

DIRECTION HOLD SCREW FIX BOLT FIX

OPEN IN CLOSED 310-1006 310-1110

OPEN IN OPEN 310-1008 310-1112

OPEN OUT CLOSED 310-1010 310-1114

GRAVITY KITS ♦ TO ORDER SPECIFY LH OR RH HINGE TYPE ♦ DETERMINE OPEN OR CLOSED BY STANDING INSIDE

CUBLICLE LOOKING AT THE DOOR ♦ FINISH – SATIN ♦ PACK 1

♦ EACH KIT CONSISTS OF: 2 – HINGES 1 – INDICATOR & BOLT 1 – STAPLE 1 – DOOR BUMPER 1 – HAT & COAT HOOK

♦ ALL KITS SUPPLIED WITH FIXING SCREWS, BOLTS AND NUTS

GRAVITY HINGE KITS

HAND HOLD SCREW BOLT

LH OPEN 90º 310-2430 310-2500

RH OPEN 90º 310-2432 310-2502

LH CLOSED 310-2434 310-2504

RH CLOSED 310-2436 310-2506

DIRECTION HOLD SCREW BOLT

OPEN IN CLOSED - 310-2554

OPEN IN OPEN 310-2580 310-2556

OPEN OUT CLOSED - 310-2558

SPRING HINGE KITS

LEFT

SECTION INDEX A · 2016. 6. 3. · hinge-fit pty ltd 2001 a.01 177 – 179 grange rd fairfield vic....

Documents

Transcript of SECTION INDEX A · 2016. 6. 3. · hinge-fit pty ltd 2001 a.01 177 – 179 grange rd fairfield vic....