Section I Contents - Boatswain's Locker I Contents BuCk AlgonquIn ... plers are cast from ductile...

335

Driveline & engine Mounting

Section I Contents

BuCk AlgonquIn TransmissionCouplers................................................................................................................I336 PackingBoxes.............................................................................................................................I343

BuShIngS, InC. DF-100EngineMounts................................................................................................................I345 DF-206EngineMounts................................................................................................................I345 DF-216EngineMounts................................................................................................................I346 DF-236-M1,DF-237-M1,DF-238-M1EngineMounts.................................................................I346 DF-242,DF-243,DF-244,DF-245EngineMounts.......................................................................I347 DF-475-M3,DF-477-M3,DF-478-M3EngineMounts.................................................................I347 DF-2204,DF-2205,DF-2207EngineMounts...............................................................................I348 DF-3304,DF-3306,DF-3307EngineMounts..............................................................................I348 DF-4405,DF-4406,DF-04407,DF-4408EngineMounts............................................................I349 DF-4425,DF-4226,DF-4227,DF-4228EngineMounts..............................................................I349 DF-9106EngineMounts..............................................................................................................I350 RM-1060EngineMounts.............................................................................................................I350

DrIp-free pACkIng (WeStern trADIng, InC.) Flax&SyntheticPacking........................................................................................................... H333 Graphtec&GraphtexPacking.................................................................................................. H334 MoldablePacking...................................................................................................................... H334 ShaftLubricant.......................................................................................................................... H334

gloBe CoMpoSIte Drivesaver....................................................................................................................................I351 DrivesaverSelectionGuidebyEngine........................................................................................I353 DrivesaverCrossReference........................................................................................................I354 EngineMounts............................................................................................................................I356 MorSe DrivelineAccessories..................................................................................................................I357

pYI, InC. ShaftSeals..................................................................................................................................I363

i

Driveline & engine

Mounting

Western Trading, Inc.

BoAtSWAIn’S loCker® WWW.BoAtSWAInSloCker.CoM

336

A - Overall Length

B - Male Pilot (M type)

C - Female Pilot (F type)

D - Flange Diameter

E - Keyway Width

F - Pilot Diameter

G - Bolt Circle Diameter

H - Shaft Diameter

Buck Algonquin manufactures a full line of transmission couplers for most marine transmissions. Our cou-plers are cast from ductile iron and machined to SAE J755 specifications. Most of our couplers are machined withour universal bolthole pattern. As well, all of our couplers are supplied with mounting hardware. We also offer cus-tom machining for any couplers we do not standardly produce. We carry an extensive inventory in order to bettersupply our distributors and OEMs.

The following charts can be used to help indentify the coupler you need. The first chart is catagorized bytransmission manufacturer, while the second chart is catagorized by flange diameter. Please feel free to contact ourknowledgeable sales staff for assistance.

Shaft Diameter

Key Size

3/4'' 3/16''

7/8'' - 1-1/8'' 1/4''

1-1/4'' - 1-3/8'' 5/16''

1-1/2'' 3/8''

1-3/4'' 7/16''

2'' 1/2''

2-1/4'' 9/16''

2-1/2'' -2-3/4'' 5/8''

3'' - 3-1/4'' 3/4''

3-1/2'' - 3-3/4'' 7/8''

4'' 1''

Shaft Diameter

Part NumberSuffix

3/4'' 0757/8'' 087

1'' 100

1-1/8'' 112

1-1/4'' 125

1-3/8'' 137

1-1/2'' 150

1-3/4'' 175

2'' 200

Shaft Diameter

Part NumberSuffix

2-1/4'' 225

2-1/2'' 250

2-3/4'' 275

3'' 300

3-1/4'' 325

3-1/2'' 350

3-3/4'' 375

4'' 400

Part Number Conversion - The part numbers listed onthe following pages are only a prefix. The complete part numberwill need a suffix number below. Example: Prefix 50mc005 + shaftsize of 1-1/4''(125). The complete number would be 50mc005125.

Keyway Sizes

Solid Split Standard Taper Reverse TaperTypes of couplers offered:

transmission CouplersI

Driv

elin

e &

eng

ine

Mou

ntin

g

BoAtSWAIn’S loCker® 800-779-BoSn (2676)

337

transmission Couplers I

Solid Split Taper Flange Dia. Shaft Range # of Bolts Bolt Size Bolt Circle Pilot Overall Length

--- --- 50tc575 5-3/4'' 1-1/2'' 6 1/2'' 4-3/4'' 3'' x 1/4'' F 5''

--- --- 50tc575 5-3/4'' 1-3/4'' - 2-1/4'' 6 1/2'' 4-3/4'' 3'' x 1/4'' F 6-1/2''

50mc573 --- --- 5-3/4'' 1-1/2'' - 2'' 6 1/2'' 4-3/4'' 3'' x 1/4'' F 4-1/2''

--- 505751 --- 5-3/4'' 1-1/4'' - 2-1/4'' 6 1/2'' 4-3/4'' 3'' x 1/4'' F 4-3/16''

--- --- 50tc725 7-1/4'' 1-3/4'' - 2-1/2'' 6 5/8'' 6'' 3-3/4'' x 1/4'' F 7-3/4''

--- 50725a --- 7-1/4'' 1-1/4'' - 1-3/4'' 6 5/8'' 6'' 3-3/4'' x 1/4'' F 4-3/8''

--- 50725b --- 7-1/4'' 2'' - 2-1/2'' 6 5/8'' 6'' 3-3/4'' x 1/4'' F 5-1/2''

--- --- 50tc900 9'' 2'' - 3'' 8 3/4'' 7-1/2'' 6'' x 1/4'' F 7-3/4''

--- 509001 9'' 1-1/2'' - 3'' 8 3/4'' 7-1/2'' 6'' x 1/4'' F 5-1/2''

Atomic Four (Universal)Solid Split Taper Flange Dia. Shaft Range # of Bolts Bolt Size Bolt Circle Pilot Overall Length

50mc3500 --- --- 3.410'' 7/8'' - 1-1/8'' 3 3/8'' 2-3/4'' 1-7/8'' x 1/4'' F 2.437''

Borg Warner Solid Split Taper Flange Dia. Shaft Range # of Bolts Bolt Size Bolt Circle Pilot Overall Length

50mc004 --- 4'' 3/4'' - 1-1/2'' 4 3/8'' 3-1/4'' 2-1/2'' x 3/32'' M 2-1/4''

--- 50401s --- 4'' 1'' - 1-1/4'' 4 3/8'' 3-1/4'' 2-1/2'' x 3/32'' M 2''

--- 50400b --- 4'' 1'' - 1-1/2'' 4 3/8'' 3-1/4'' 2-1/2'' x 3/32'' M 3-7/16''

50mc005 --- --- 5'' 1'' - 2'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 2-5/8''

50mcf004 --- --- 4'' 3/4'' - 1-1/2'' 4 3/8'' 3-1/4'' 2-1/2'' x 3/16'' F 2-1/4''

50mcf005 --- --- 5'' 1'' - 1-1/2'' 4 7/16'' 4-1/4'' 2-1/2'' x 1/4'' F 2-5/8''

--- 50500a --- 5'' 1'' - 1-1/2'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 3-7/16''

--- 50500c --- 5'' 1-1/2'' - 2'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 4''

--- 50500s --- 5'' 1'' - 1-1/2'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 2-1/2''

--- --- 50tc500 5'' 1-1/4'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 3-7/8''

--- --- 50tc500 5'' 1-3/8'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 4-1/4''

--- --- 50tc500 5'' 1-1/2''-1-3/4'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 5''

--- --- 50tc005* 5'' 1-1/4'' - 1-3/4'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 2-3/4''

--- --- 50tc575 5-3/4'' 1-1/2'' 6 1/2'' 4-3/4'' 3'' x 1/4'' F 5''

--- --- 50tc575 5-3/4'' 1-3/4'' - 2-1/4'' 6 1/2'' 4-3/4'' 3'' x 1/4'' F 6-1/2''

50mc573 --- --- 5-3/4'' 1-1/2'' - 2'' 6 1/2'' 4-3/4'' 3'' x 1/4'' F 4-1/2''

--- 505751 --- 5-3/4'' 1-1/4'' - 2-1/4'' 6 1/2'' 4-3/4'' 3'' x 1/4'' F 4-3/16''

* Reverse Taper Bore

Part Number

Part Number

Part Number

Allison

Driveline & engine

Mounting


338



50mc004 --- 4'' 3/4'' - 1-1/2'' 4 3/8'' 3-1/4'' 2-1/2'' x 3/32'' M 2-1/4''

--- 50401s --- 4'' 1'' - 1-1/4'' 4 3/8'' 3-1/4'' 2-1/2'' x 3/32'' M 2''

--- 50400b --- 4'' 1'' - 1-1/2'' 4 3/8'' 3-1/4'' 2-1/2'' x 3/32'' M 3-7/16''

50mc005 --- --- 5'' 1'' - 2'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 2-5/8''

--- 50500a --- 5'' 1'' - 1-1/2'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 3-7/16''

--- 50500c --- 5'' 1-1/2'' - 2'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 4''

--- --- 50tc500 5'' 1-1/4'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 3-7/8''

--- --- 50tc500 5'' 1-3/8'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 4-1/4''

--- --- 50tc500 5'' 1-1/2''-1-3/4'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 5''

Capitol Solid Split Taper Flange Dia. Shaft Range # of Bolts Bolt Size Bolt Circle Pilot Overall Length

--- 50475a --- 4-3/4'' 1'' -1-1/2'' 6 7/16'' 3-7/8'' 2-1/2'' x 3/16'' F 3-1/2''

--- 50475b --- 4-3/4'' 1-1/2'' - 2'' 6 7/16'' 3-7/8'' 2-1/2'' x 3/16'' F 4''

50mc4725 --- --- 4-3/4'' 1-1/4'' - 1-1/2'' 6 7/16'' 3-7/8'' 2-1/2'' x 3/16'' F 3-5/8''

--- --- 50tc475 4-3/4'' 1-3/8'' - 1-3/4'' 6 7/16'' 3-7/8'' 2-1/2'' x 3/16'' F 4-3/16''

--- --- 50tc575 5-3/4'' 1-1/2'' 6 1/2'' 4-3/4'' 3'' x 1/4'' F 5''

--- --- 50tc575 5-3/4'' 1-3/4'' - 2-1/4'' 6 1/2'' 4-3/4'' 3'' x 1/4'' F 6-1/2''

50mc573 --- --- 5-3/4'' 1-1/2'' - 2'' 6 1/2'' 4-3/4'' 3'' x 1/4'' F 4-1/2''

--- 505751 --- 5-3/4'' 1-1/4'' - 2-1/4'' 6 1/2'' 4-3/4'' 3'' x 1/4'' F 4-3/16''

--- --- 50tc725 7-1/4'' 1-3/4'' - 2-1/2'' 6 5/8'' 6'' 3-3/4'' x 1/4'' F 7-3/4''

--- 50725a --- 7-1/4'' 1-1/4'' - 1-3/4'' 6 5/8'' 6'' 3-3/4'' x 1/4'' F 4-3/8''

--- 50725b --- 7-1/4'' 2'' - 2-1/2'' 6 5/8'' 6'' 3-3/4'' x 1/4'' F 5-1/8''

Newage Solid Split Taper Flange Dia. Shaft Range # of Bolts Bolt Size Bolt Circle Pilot Overall Length

50mc005 --- --- 5'' 1'' - 2'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 2-5/8''

--- 50500a --- 5'' 1'' - 1-1/2'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 3-7/16''

--- 50500c --- 5'' 1-1/2'' - 2'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 4''

--- --- 50tc500 5'' 1-1/4'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 3-7/8''

--- --- 50tc500 5'' 1-3/8'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 4-1/4''

--- --- 50tc500 5'' 1-1/2''-1-3/4'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 5''

--- --- 50tc575 5-3/4'' 1-1/2'' 6 1/2'' 4-3/4'' 3'' x 1/4'' F 5''

--- --- 50tc575 5-3/4'' 1-3/4'' - 2-1/4'' 6 1/2'' 4-3/4'' 3'' x 1/4'' F 6-1/2''

50mc573 --- --- 5-3/4'' 1-1/2'' - 2'' 6 1/2'' 4-3/4'' 3'' x 1/4'' F 4-1/2''

--- 505751 --- 5-3/4'' 1-1/4'' - 2-1/4'' 6 1/2'' 4-3/4'' 3'' x 1/4'' F 4-3/16''

--- --- 50tc725 7-1/4'' 1-3/4'' - 2-1/2'' 6 5/8'' 6'' 3-3/4'' x 1/4'' F 7-3/4''

--- 50725a --- 7-1/4'' 1-1/4'' - 1-3/4'' 6 5/8'' 6'' 3-3/4'' x 1/4'' F 4-3/8''

--- 50725b --- 7-1/4'' 2'' - 2-1/2'' 6 5/8'' 6'' 3-3/4'' x 1/4'' F 5-1/8''

Part Number

Part Number

Part Number

Hurth

Driv

elin

e &

eng

ine

Mou

ntin

g


339



--- 50475a --- 4-3/4'' 1'' -1-1/2'' 6 7/16'' 3-7/8'' 2-1/2'' x 3/16'' F 3-1/2''

--- 50475b --- 4-3/4'' 1-1/2'' - 2'' 6 7/16'' 3-7/8'' 2-1/2'' x 3/16'' F 4''

50mc4725 --- --- 4-3/4'' 1-1/4'' - 1-1/2'' 6 7/16'' 3-7/8'' 2-1/2'' x 3/16'' F 3-5/8''

--- --- 50tc475 4-3/4'' 1-3/8'' - 1-3/4'' 6 7/16'' 3-7/8'' 2-1/2'' x 3/16'' F 4-3/16''

-- 50501a --- 5'' 1'' -1-1/2'' 8 3/8'' 4-1/8'' 2-1/2'' x 3/32'' M 3-7/16''

--- --- 50tc501 5'' 1-1/4'' - 1-3/4'' 8 3/8'' 4-1/4'' 2-1/2'' x 3/32'' M 5-3/32''

--- 505752 --- 5-3/4'' 1-1/4'' - 2-1/4'' 6 5/8'' 4-3/4'' 3'' x 1/4'' F 4-3/16''

50mc574 --- --- 5-3/4'' 1-1/2'' - 2'' 6 5/8'' 4-3/4'' 3'' x 1/4'' F 4-1/2''

--- --- 50tc576 5-3/4'' 1-1/2'' 6 5/8'' 4-3/4'' 3'' x 1/4'' F 5''

--- --- 50tc576 5-3/4'' 1-3/4'' - 2-1/4'' 6 5/8'' 4-3/4'' 3'' x 1/4'' F 6-1/2''

--- 50726a --- 7-1/4'' 1-1/4'' - 1-3/4'' 6 3/4'' 6'' 3-3/4'' x 1/4'' F 4-3/8''

--- 50726b --- 7-1/4'' 2'' - 2-1/2'' 6 3/4'' 6'' 3-3/4'' x 1/4'' F 5-1/8''

--- --- 50tc726 7-1/4'' 1-3/4'' - 2-1/2'' 6 5/8'' 6'' 3-3/4'' x 1/4'' F 7-3/4''

--- --- 50tc901 9'' 2'' - 3'' 8 7/8'' 7-1/2'' 6'' x 1/4'' F 7-3/4''

--- 509002 --- 9'' 1-1/2'' - 3'' 8 7/8'' 7-1/2'' 6'' x 1/4'' F 5-1/2''

--- 501050 --- 10-1/2'' 2-1/2'' - 4'' 8 1'' 8-3/4'' 5'' x 1/4'' F 6-1/2''

--- --- 50tc1050 10-1/2'' 2-1/2'' - 4'' 8 1'' 8-3/4'' 5'' x 1/4'' F 8''

Paragon Solid Split Taper Flange Dia. Shaft Range # of Bolts Bolt Size Bolt Circle Pilot Overall Length

--- 50400a --- 4'' 1'' - 1-1/2'' 4 3/8'' 3-1/4'' 2'' X 3/32'' M 3-7/16''

--- 50400s --- 4'' 1'' - 1-1/4'' 4 3/8'' 3-1/4'' 2'' X 3/32'' M 2''

50mc4020 --- --- 4'' 3/4'' - 1-3/8'' 4 3/8'' 3-1/4'' 2'' X 3/32'' M 2-1/4''

--- 50400c --- 4'' 1'' - 1-1/2'' 4 3/8'' 3-1/4'' 2-5/8'' X 3/32'' M 3-7/16''

--- 50402s --- 4'' 1'' - 1-1/4'' 4 3/8'' 3-1/4'' 2-5/8'' X 3/32'' M 2''

50mc4026 --- --- 4'' 3/4'' - 1-3/8'' 4 3/8'' 3-1/4'' 2-5/8'' X 3/32'' M 2-1/4''

50mc4526 --- --- 4-1/2'' 1'' - 1-3/4'' 4 3/8'' 3-3/4'' 2-5/8'' X 3/32'' M 2-5/8''

--- 50500b --- 5'' 1'' - 1-1/2'' 4 3/8'' 4-1/8'' 2-3/4'' X 3/32'' M 3-7/16''

--- 50500d --- 5'' 1-1/2'' - 2'' 4 3/8'' 4-1/8'' 2-3/4'' X 3/32'' M 4''

--- 50501s --- 5'' 1'' - 1-1/2'' 4 3/8'' 4-1/8'' 2-3/4'' X 3/32'' M 2-1/2''

50mc5022 --- --- 5'' 1'' - 1-3/4'' 4 3/8'' 4-1/8'' 2-1/4'' X 3/32'' M 2-5/8''

50mc5027 --- --- 5'' 1'' - 1-3/4'' 4 3/8'' 4-1/8'' 2-3/4'' X 3/32'' M 2-5/8''


50mvp400 --- --- 3.945'' 3/4'' - 1-1/4'' 4 10mm 3.142'' 2.366'' x 3/32'' F 2-17/32''

Volvo Penta

Part Number

Part Number

Part Number

Twin Disc

Driveline & engine

Mounting


340


Solid Split TaperFlange Dia. Shaft Range # of Bolts Bolt Size Bolt Circle Pilot Overall Length

--- 50400ys --- 4'' 3/4'' - 1-1/4'' 4 10mm 3.070'' 1.966'' x 5/32'' M 2''

50mcy004 --- --- 4'' 3/4'' - 1-3/8'' 4 10mm 3.070'' 1.966'' x 5/32'' M 2-1/4''

--- 50500ys --- 4-3/4'' 1'' - 1-1/2'' 4 10mm 3.937'' 2.556'' x 1/8'' M 3-7/16''

50mcy005 --- --- 4-3/4'' 1'' - 1-3/4'' 4 10mm 3.937'' 2.556'' x 1/8'' M 2-3/8''

50mcy4Lh --- --- 5.120'' 1'' - 1-1/2'' 4 10mm 4-1/4'' 2.499'' x 3/16'' M 3-29/32''

Yanmar

Solid Split TaperFlange Dia. Shaft Range # of Bolts Bolt Size Bolt Circle Pilot Overall Length

--- 50476a --- 4-3/4'' 1'' -1-1/2'' 6 12mm 3-7/8'' 2-1/2'' x 3/16'' F 3-1/2''

--- 50476b --- 4-3/4'' 1-1/2'' - 2'' 6 12mm 3-7/8'' 2-1/2'' x 3/16'' F 4''

50mc4726 --- --- 4-3/4'' 1-1/4'' - 1-1/2'' 6 12mm 3-7/8'' 2-1/2'' x 3/16'' F 3-5/8''

--- --- 50tc476 4-3/4'' 1-3/8'' - 1-3/4'' 6 12mm 3-7/8'' 2-1/2'' x 3/16'' F 4-3/16''

50mc574 --- --- 5-3/4'' 1-1/2'' - 2'' 6 16mm 4-3/4'' 3'' x 1/4'' F 4-1/2''

--- 505752 --- 5-3/4'' 1-1/4'' - 2-1/4'' 6 5/8'' 4-3/4'' 3'' x 1/4'' F 4-3/16''

--- --- 50tc576 5-3/4'' 1-1/2'' 6 5/8'' 4-3/4'' 3'' x 1/4'' F 5''

--- --- 50tc576 5-3/4'' 1-3/4'' - 2-1/4'' 6 5/8'' 4-3/4'' 3'' x 1/4'' F 6-1/2''

--- 50610b --- 6.10'' 1-3/4'' - 2-1/2'' 10 5/8'' 4.921'' 3.94'' x .215'' F 5''

--- --- 50tc610 6.10'' 2'' - 2-1/4'' 10 5/8'' 4.921'' 3.94'' x .215'' F 6-1/2''

--- 50669 --- 6.69'' 1-3/4'' - 2-1/2'' 12 16mm 5.512'' 4.530'' x 9/32'' F 5''

--- --- 50tc669 6.69'' 2'' 12 16mm 5.512'' 4.530'' x 9/32'' F 6-1/2''

--- --- 50tc669 6.69'' 2-1/4'' - 3'' 12 16mm 5.512'' 4.530'' x 9/32'' F 7-1/2''

--- --- 50tc725g 7.283'' 2'' - 2-1/4'' 12 18mm 6.122'' 4.725'' x 9/32'' F 6-1/2''

--- --- 50tc725g 7.283'' 2-1/2'' - 3'' 12 18mm 6.122'' 4.725'' x 9/32'' F 7-1/2''

--- 50886 --- 8.86'' 2'' - 2-1/2'' 8 16mm 7.717'' 5.514'' x 1/4'' F 5-1/2''

--- --- 50tc886 8.86'' 2'' - 4'' 8 16mm 7.717'' 5.514'' x 1/4'' F 7-3/4''

--- 501050 --- 10-1/2'' 2-1/2'' - 4'' 8 1'' 8-3/4'' 5'' x 1/4'' F 6-1/2''

--- --- 50tc1050 10-1/2'' 2-1/4'' - 4'' 8 1'' 8-3/4'' 5'' x 1/4'' F 8''


--- 50400d --- 4'' 1-1/2'' 8 3/8'' 3-1/4'' 2'' x 3/16'' F 3-3/8''

Miscellaneous

ZF

Part Number

Part Number

Part Number

Driv

elin

e &

eng

ine

Mou

ntin

g


341


Flange Dia. Transmission Model Number Pilot M/F # of

BoltsBolt Dia.

Bolt Circle Solid Split Taper

3.410'' Universal Atomic 4 1.876''/F 3 3/8'' 2-3/4'' 50mc3500 --- ---

3.945'' Volvo Penta MB10A, MD38, MD7A, MD11C 2.362''/F 4 3/8'' 3.149'' 50mvp400 --- ---

4'' Hurth HBW5, 10, 20, 50, 100, 125, 125H, 150, 150A,150V, 220, 250, HSW450D, 250H, 250A 2-1/2''/M 4 3/8'' 3-1/4'' 50mc004 50401s, 50400b ---

4'' Borg Warner 70C, 1017, 1023, 2301 2-1/2''/M 4 3/8'' 3-1/4'' 50mc004 50401s, 50400b ---

4'' Newage PRM Delta 2-1/2''/M 4 3/8'' 3-1/4'' 50mc004 50401s, 50400b ---

4'' Paragon HF, HB, RD 2''/M 4 3/8'' 3-1/4'' 50mc4020 50400s, 50400a ---

4'' Paragon P-200, P-300, P-13, PV-300 2-5/8''/M 4 3/8'' 3-1/4'' 50mc4026 --- ---

4'' ZF ZF5M, 10M, 12M, 12, 15M, 15MA, 15MIV,25M, 25MA, 30M, 45C, 25, 25A,45IV 2-1/2''/M 4 3/8'' 3-1/4'' 50mc004 50401s, 50400b ---

4-1/2'' Paragon RA, PV400 2-5/8''/M 4 3/8'' 3-3/4'' 50mc4526 --- ---

4-3/4'' Capitol 5HD200 2-1/2''/F 6 7/16'' 3-7/8'' 50mc4725 50475a, 50475b 50tc475

4-3/4'' Twin Disc MG-502, 502-1 2-1/2''/F 6 7/16'' 3-7/8'' 50mc4725 50475a, 50475b 50tc475

4-3/4'' Yanmar 30M30H/G, KVH20, KHIS 2.556/M 4 10mm 3.937'' 50mcy005 50500ys ---

4-3/4'' ZF ZF220A, IRM220A1, IRM220A/V, ZF220V,IRM220V2, IRM225A 2-1/2''/F 6 12mm 3-7/8'' 50mc4726 50476a, 50476b 50tc476

5'' Borg Warner 72C-1017, 1018, 1004, 1005, 1013, 1014, 2001 2-1/2''/F 4 7/16'' 4-1/4'' 50mc005 50500a, 50500c 50tc500

5'' Hurth

HS25A, HS45A, HS63IV, HSW630A, 630H,630V, 880D, 450A2, 630D, 630A1, 630H1,

630V1, 90ATS, 90TS, 90VTS, 110TS,HBW630,630A, 400, 450, 600, 630

2-1/2''/M 4 7/16'' 4-1/4'' 50mc005 50500a, 50500c 50tc500

5'' Newage PRM 210/160 2-1/2''/M 4 7/16'' 4-1/4'' 50mc005 50500a, 50500c 50tc500

5'' Paragon P-400 2-3/4''/M 4 3/8'' 4-1/8'' 50mc5027 50500b,50500d ---

5'' Twin Disc 5010A, 5011A 2-1/2''/M 8 7/16'' 4-1/4'' --- 50501a ---

5'' Volvo Penta MS, MS3, MS4A, MV2 2-1/2''/M 4 7/16'' 4-1/4'' 50mc005 50500a, 50500c 50tc500

5'' ZFZF88C, 45A, 63A, 63C, 63IV, 90ATS, 90TS,110TS, IRM41A2, 50A2, 50V2, 50V3, 501,

50A2/K3, 50V2/3LD2-1/2''/M 4 7/16'' 4-1/4'' 50mc005 50500a, 50500c 50tc500

5.120'' Yanmar 4LH-TE/4LH-HTE 2-1/2''/M 4 1 4-1/4'' 50mcy4Lh --- ---

5-3/4'' Allison n/a 3''/F 6 1/2'' 4-3/4'' 50mc573 505751 50tc575

5-3/4'' Borg Warner n/a 3''/F 6 1/2'' 4-3/4'' 50mc573 505751 50tc575

5-3/4'' Capitol 2H3/4HE-10200, 2HE/4H3-11200, M105, M125 3''/F 6 1/2'' 4-3/4'' 50mc573 505751 50tc575

5-3/4'' Hurth HSW800A, 800V, 800VI, 110VTS 3''/F 6 1/2'' 4-3/4'' 50mc573 505751 50tc575

5-3/4'' Hurth HSW800A2, 800A3, 110ATS 3''/F 6 5/8'' 4-3/4'' 50mc574 505752 50tc576

Transmission GuidePart Number

Driveline & engine

Mounting


342


Flange Dia. Transmission Model Number Pilot M/F # of

BoltsBolt Dia.

Bolt Circle Solid Split Taper

5-3/4'' Newage PRM302, 310, 401, 402, 500D, 601, 601A 3''/F 6 1/2'' 4-3/4'' 50mc573 505751 50tc575

5-3/4'' Twin DiscMG506, 5061A, 5062V, 507, 5050, 5050A,5050V, 5061, 506-1, 506A, 507-2, 507-1,

507A-1, 507A-23''/F 6 5/8'' 4-3/4'' 50mc574 505752 50tc576

5-3/4'' ZF IRM,301, 220V/LD, ZF80IV, 85IV, 110IVTS,220IV 3''/F 6 1/2'' 4-3/4'' 50mc573 505751 50tc575

5-3/4'' ZF

IRM220PL, 280A, 280V-LD-1, 300VTS, 301A-1,301A-2,301PL-, 301PL-2, ZF80A, 85A, 110ATS,220, 2801, 2801A, 280IV, 280A, 285A, 285IV,

286A, 286IV, 3001TS, 3001ATS, 300IVTS, 301A,301C

3''/F 6 5/8'' 4-3/4'' 50mc574 505752 50tc576

6.10'' ZF ZF3051, 305A, 3051A 3.94''/F 10 16mm 4.921'' --- 50610b 50tc610

6.69'' ZF ZF325ATS, 325IV, 325IVTS, 325TS, 3251, 3251A,IRM325A, 165PL 4.528''/F 12 16mm 5.512'' --- 50669 50tc669

7-1/4'' Allison M 3-3/4''/F 6 5/8'' 6'' --- 50725a, 50725b 50tc725

7-1/4'' Allison M 3-3/4''/F 6 3/4'' 6'' --- 50726a, 50726b 50tc726

7-1/4'' Capitol 4HE10700, 11700, HY22000, 24000, HY2500,HY6900 3-3/4''/F 6 5/8'' 6'' --- 50725a, 50725b 50tc725

7-1/4'' Capitol D5072 3-3/4''/F 6 3/4'' 6'' --- 50726a, 50726b 50tc726

7-1/4'' Newage PRM60, 601, 601A 3-3/4''/F 6 5/8'' 6'' --- 50725a, 50725b 50tc725

7-1/4'' Twin DiscMG506, 5065A, 507, 507-1, 507-2, 507A-1,507A-2, 5075, 5075A, 5075IV, 5085, 509,

509-1SC, 508-1, 509-1, 5091V, 509-1SC, 5090A 3-3/4''/F 6 3/4'' 6'' --- 50726a, 50726b 50tc726

7-1/4'' ZF IRM310AL, V250M 3-3/4''/F 6 16mm 6'' --- 50725a, 50725b 50tc725

7-1/4'' ZFIRM302VLD1, 302V/6, 304A, 310A, 310PL,

311A, 311A-1, 311PL, 312TS, V250M, ZF302IV,304A, 304C, 311A, 312TS

3-3/4''/F 8 16mm 6'' --- 50725bzf 50tc72zf

7.28'' ZF

BW190, 195, 195P, 2000A, 2060A, ZF2000,2000A, ZF2000V, 2050, 2050A, 2050V, 2060,2060A, 2060V, 2070, 2070V, 2150, 2150A,

2150V,

4.725''/F 12 18mm 6.122'' --- --- 50tc725g

7.87'' ZF IRM200, 320PL, V250M 5.511''/F 8 16mm 6.732'' --- 50787zf ---

8.07'' ZF

BW155, 155A, 155ATS, 155TS, 155V, IRM311PL,320, 320A, 350-A, 350A-2, 350AL/PL, 350ATS,350PL-2, 350TS, 350V-LD-1,350V, ZF311, ZF350,

350A, 350ATS, 350IV, 350TS, 350V, 500A,500IV, 510A, 550, 550A, 550ATS, 550TS, 665,

665A, 665ATS, 665TS, 665V,

5.511''/F 10 18mm 6.692'' --- 50807zf 50tc807

8.86'' ZF IRM320, 320A, 320/LAV, 3202, ZF320,ZF550VTS 5.514''/F 8 16mm 7.717'' --- 50886 50tc886

8.86'' ZFBW250, 250V, 2500A, 255, 255A, 255AP, 255P,

255V, 255VP, ZF2500, 2500A, 2500V, 2550,2550A, 2550V, 2555V, 2555, 2555A, 2555V,

5.514''/F 15 16mm 7.717'' --- ---- 50tc886

9'' Allison M20 6''/F 8 3/4'' 7-1/2'' --- 509001 50tc900

9'' Allison MH, 15R-L 6''/F 8 7/8'' 7-1/2'' --- 509002 50tc901

9'' Twin Disc MG510A, 5111A, DD511, 510, 5111SC,5114A, 5135A 6''/F 8 7/8'' 7-1/2'' --- 509002 50tc901

9'' ZF IRM320AL 6''/F 8 7/8'' 7-1/2'' --- 509002 50tc901

10-1/2'' Twin Disc MG509, 512, 513, 514, 514C 5''/F 8 1'' 8-3/4'' --- 501050 50tc1050

10-1/2'' ZF IRM320LAV 5''/F 8 1'' 8-3/4'' --- 501050 50tc1050

Transmission Guide - Continued

Part Number

Driv

elin

e &

eng

ine

Mou

ntin

g


343

Bronze packing Boxes I

PartNumber

ShaftSize

HoseI. D.

PackingSize

Weight,lbs.

00pb75 3/4'' 1-1/2'' 3/8'' 1.75

00pb88 7/8'' 1-3/4'' 5/16'' 1.75

00pb100x 1'' 1-1/2'' 1/4'' 1.75

00pb100 1'' 1-3/4'' 1/4'' 1.75

00pb100fg 1'' 2'' 1/4'' 1.90

00pb100225 1'' 2-1/4'' 1/4'' 2.30

00pb113 1-1/8'' 1-3/4'' 3/16'' 1.75

00pb113fg 1-1/8'' 2'' 3/16'' 1.90

00pb113h 1-1/8'' 2-1/4'' 3/16'' 2.80

00pb125175 1-1/4'' 1-3/4'' 1/4'' 2.75

00pb125fg 1-1/4'' 2'' 1/4'' 2.30

00pb125 1-1/4'' 2-1/4'' 1/4'' 2.85

00pb138 1-3/8'' 2-1/2'' 5/16'' 3.35

00pb15225 1-1/2'' 2-1/4'' 1/4'' 3.80

00pb150 1-1/2'' 2-1/2'' 1/4'' 3.35

jpb175 1-3/4'' 2-1/2'' 3/8'' 5.70

00pb175 1-3/4'' 3'' 1/2'' 8.00

00pb175L 1-3/4'' 3-1/2'' 1/2'' 9.00

00pb200 2'' 3'' 3/8'' 8.00

00pb200L 2'' 3-1/2'' 3/8'' 9.00

00pb225 2-1/4'' 3-1/2'' 7/16'' 12.00

00pb250 2-1/2'' 3-1/2'' 5/16'' 12.00

00pb300 3'' 4-1/2'' 9/16'' 30.00

Bronze Packing Boxes - Self Aligning - Spud Type - Right Hand ThreadComplete w/ hose, four s/s clamps, packing nut & lock nut - Sold complete

PartNumber

ShaftSize

HoseI. D.

Packing Size

Weight,lbs.

00pb113Lh 1-1/8'' 1-3/4'' 3/16'' 1.75

00pb125Lh 1-1/4'' 2-1/4'' 1/4'' 2.85

00pb150Lh 1-1/2'' 2-1/2'' 1/4'' 3.35

00pb175Lh 1-3/4'' 3'' 1/2'' 8.00

00pb200Lh 2'' 3'' 3/8'' 8.00

00pb225Lh 2-1/4'' 3-1/2'' 7/16'' 12.00

00pb250Lh 2-1/2'' 3-1/2'' 5/16'' 12.00

Bronze Packing Boxes - Self Aligning - Spud Type - Left Hand ThreadComplete w/ hose, four clamps, packing nut & lock nut - Sold complete

See next page for replacement parts.

See next page for replacement parts.

Driveline & engine

Mounting


344

Packing Spuds - Sold each

Replacement Parts for Packing Boxes - Spud Type

Part Number Use With Part Numbers

0075pbs 00pb75

0088pbs 00pb88

00100pbs 00pb100x, 00pb100, 00pb100fg &00pb100225

00113pbs 00pb113, 00pb113fg & 00pb113h

00125pbs 00pb125175, 00pb125fg, & 00pb125

00138pbs 00pb138

00150pbs 00pb15225, 00pb150

00175pbsoy jbpb175

00175pbs 00pb175 & 00pb175L

00200pbs 00pb200, 00pb200L

00225pbs 00pb225

00250pbs 00pb250

00300pbs 00pb300

00125pbsL 00pb125Lh

3059pbs 00pb113Lh

00150pbsLh 00pb150Lh





Part Number Use With Part Numbers

00100pbn00pb75, 00pb88, 00pb100x,

00pb100, 00pb100fg, 00pb100225,00pb113, 00pb113fg & 00pb113h

00125pbn 00pb125175, 00pb125fg & 00pb125,

00138pbn 00pb138, 00pb15225 & 00pb150,

00175pbnoy jpb175

00175pbn 00pb175, 00pb175L, 00pb200 & 00pb200L

00225pbn 00pb225 & 00pb250

00300pbn 00pb300

3059pbn 00pb113Lh

00125pbnL 00pb125Lh

00150pbnLh 00pb150Lh

00175pbnLh 00pb175Lh & 00pb200Lh

00225pbnLh 00pb225Lh & 00pb250Lh

Part NumberWorm Gear

Use With Part Numbers

80ho150 00pb75, 00pb100x

80ho175 00pb88, 00pb100, 00pb113,00pb125175, 00pb113Lh

80ho200 00pb100fg, 00pb113fg, 00pb125fg

80ho225 00pb100225, 00pb113h, 00pb125,00pb15225, 00pb125Lh

80ho250 00pb138, 00pb150, jpb175,00pb150Lh

80ho300 00pb175, 00pb200, 00pb175Lh,00pb200Lh

80ho350 00pb175L, 00pb200L, 00pb225,00pb250, 00pb225Lh, 00pb250Lh

80ho450 00pb300

Part NumberWorm Gear

Part NumberT-Bolt

Use With Part Numbers

70hss32c 70stbc225 00pb75 & 00pb100x

70hss36c 70stbc238 00pb88, 00pb100, 00pb113,00pb125175 & 00pb113Lh

70hss40c 70stbc275 00pb100fg, 00pb113fg & 00pb125fg

70hss44c 70stbc30000pb100225, 00pb113h,

00pb125, 00pb15225 & 00pb125Lh

70hss48c 70stbc325 00pb138, 00pb150, jpb175& 00pb150Lh

70hss56c 70stbc375 00pb175, 00pb200,00pb175Lh & 00pb200Lh

70hss72c 70stbc42500pb175L, 00pb200L,00pb225, 00pb250,

00pb225Lh & 00pb250Lh

70hss88c 70stbc532L 00pb300

Lock Nuts - Sold each

Hoses - Sold each Clamps - Sold each

Spud

Clamps

LockNut

Hose

replacement parts for packing BoxesI

Driv

elin

e &

eng

ine

Mou

ntin

g


345

engine Mounting I

SuggeSteD MountIngS:

engine Weights 4 point Mountings Upto850lbs DF-100

DF-100 Engine MountThe (“Dual Flex”) DF-100 Engine Mount features heavydutycastaluminumalloyconstructionwithadurableoilandfuelresistantelastomerelementforlonglife.Lowestprofile mount-requires only 1 7/8" minimum clearancefromcastingbasetotopoflevelingnut.Easyinstallationwith threaded 5/8" stud for vertical height adjustment,furnishedcompletewithleveling,andlockingnuts.

Aluminum base cast with one 3/8" mounting hole andone slotted hole for either 3/8" bolts or lag screws, on4" centers. All steel parts are zinc dichromate platedfor corrosion resistance. Recommended for 4 pointmountingsupto850pounds.

DF-206 Engine Mount The DF-206 Engine Mount recommended for all 4 and6 cylinder, and V8 gas powered engines up to 800 lbs.Thismountfeaturesheavydutyaluminum356-T6alloyconstructionwithlipincorporatedinthetopofthecastingtoresisttheupwardpulloftheengine-coatedblacktoresistcorrosion.Durableoiland fuel resistantelastomerelement.Lowprofilemount-requiresonly23/8"minimumclearance from casting base to top of leveling nut. Failsafe design - bottom pad prevents excessive impact.Easyinstallationwith5/8"threadedstudforverticalheightadjustment.Aluminumbasecastwithone1/2"mountingholeandoneslottedholeforeither1/2"boltsorlagscrewson4"centers.Mounts furnishedcompletewith leveling,andlockingnuts.Allsteelpartsarezincdichromateplatedforcorrosionresistance.


engine Weights 4 point Mountings Upto800lbs DF-206

Driveline & engine

Mounting


346

engine MountingI


engine Weights 4 point Mountings Upto1,200lbs DF-216

DF-216 Engine Mount The DF-216 Engine Mount recommended for all 4 and6cylinder,andV8gaspoweredenginesupto1200lbs.Thismountfeaturesheavydutyaluminum356-T6alloyconstructionwithlipincorporatedinthetopofthecastingtoresisttheupwardpulloftheengine-coatedblacktoresistcorrosion.Durableoiland fuel resistantelastomerelement.Lowprofilemount-requiresonly23/8"minimumclearance from casting base to top of leveling nut. Failsafe design - bottom pad prevents excessive impact.Easyinstallationwith3/4"threadedstudforverticalheightadjustment.Aluminumbasecastwithone1/2"mountingholeandoneslottedholeforeither1/2"boltsorlagscrewson4"centers.Mounts furnishedcompletewith leveling,andlockingnuts.Allsteelpartsarezincdichromateplatedforcorrosionresistance.

DF-236-M1, DF 237-M1, DF-238-M1 Series Engine Mount The DF-236-M1 Series of heavy duty mountings isdesignedprincipallyfordieselenginesinthe1,100–2,200lb.range.Basecastingfeaturesheavydutyaluminumalloyconstruction,withlipincorporatedinthetopofthecastingtoresisttheupwardpulloftheengine–coatedblacktoresistcorrosion.Durableoiland fuel resistantelastomerelement.Lowprofilemount-requiresonly25/8"minimumclearance from casting base to top of leveling nut. Failsafedesign-bottompadpreventsexcessiveimpact.Easyinstallationwith3/4"threadedstudforverticalheightandslotted casting for horizontal adjustment. Mounts comecomplete-furnishedwiththreenuts:leveling,lockingandsecondarylock.Aluminumbasecastingwith1/2"slottedholesfor1/2"boltsorlagscrews.Allsteelpartsarezincdichromate plated for corrosion resistance. Available inthree size ratings (shown below) dependant on engine/powertrainpackageweight.


engine Weights 4 point Mountings 1,100to1,500lbs DF-236-M1 1,500to1,800lbs DF-237-M1 1,800to2,200lbs DF-238-M1

Driv

elin

e &

eng

ine

Mou

ntin

g


347

engine Mounting I


engine Weights 4 point Mountings 2,200to2,600lbs DF-242 2,600to2,900lbs DF-243 2,900to3,200lbs DF-244 3,200to3,500lbs DF-245

DF-242, DF-243, DF-244, DF-245 Series Engine Mount The DF-242 Series of heavy duty mountings is a twinstuddoublemountdesignedprincipallyfordieselenginesfrom 2,200 up to 3,500 lbs. in weight. Base castingfeaturesheavydutyaluminumalloyconstruction,withlipincorporatedinthetopofthecastingtoresisttheupwardpulloftheengine.Durableoilandfuelresistantelastomerelement.Lowprofilemount-requiresonly25/8"minimumclearance from casting base to top of leveling nut. Failsafe design - bottom pad prevents excessive impact.Easy installation with 3/4" threaded studs for verticalheight and slotted casting for horizontal adjustment.Mounts come complete - furnished with leveling, andlockingnuts.Aluminumbasecastwiththree5/8"slottedmountingholeson101/2"centers.Allsteelpartsarezincdichromate plated for corrosion resistance. Available infour size ratings (shown below) dependant on engine/powertrainpackageweight.

DF-475-M3, DF-477-M3, DF-478-M3 Series Engine Mount The DF-475-M3 Series of heavy duty mountings isdesignedprincipallyfordieselenginesinthe950–2,000lb.range.Basecastingfeaturesheavydutyaluminumalloyconstruction,withlipincorporatedinthetopofthecastingtoresisttheupwardpulloftheengine–coatedblacktoresist corrosion. Durable oil and fuel resistant elastomerelement. Low profile mount - requires only 3" minimumclearance from casting base to top of leveling nut. Truefloating mount with fail safe design - bottom cast basepadpreventsexcessiveimpact.Easyinstallationwith3/4"threaded stud for vertical height and slotted casting forhorizontaladjustment.Mountscomecomplete-furnishedwith three nuts: leveling, locking and secondary lock.Aluminumbasecastwith1/2"slottedholesfor1/2"boltsorlagscrews.Allsteelpartsarezincdichromateplatedforcorrosionresistance.Availableinthreesizeratings(shownbelow)dependantonengine/powertrainpackageweight.


engine Weights 4 point Mountings 950to1,200lbs DF-475-M3 1,200to1,600lbs DF-477-M3 1,600to2,000lbs DF-478-M3

Driveline & engine

Mounting


348

engine MountingI


engine Weights 5/8" Stud 1/2" Stud Upto150lbs DF-2204-2 DF-2204-1 150to450lbs DF-2205-2 DF-2205-1 450to750lbs DF-2207-2 DF-2207-1

DF-2204, DF-2205, DF-2207 Series Engine Mount TheDF-2200Series featuresheavydutyaluminumalloyconstructionwithlipincorporatedinthetopofthecastingto resist the upward pull of the engine. Durable oil andfuelresistantelastomerelementraisedabovetopofthecasting to accommodate engine mounting angles. Lowprofile mount-requires only 2 3/8" minimum clearancefromcastingbasetotopoflevelingnut.Failsafedesign-bottompadpreventsexcessiveimpact.Easyinstallationwiththreadedstudforverticalheightandslottedcastingforhorizontaladjustment.Studfurnishedwiththreenuts.Leveling, locking and secondary lock. Aluminum basecastwith3/8"slottedholesfor3/8"boltsorlagscrews.All steel parts are zinc dichromate plated for corrosionresistance.Availablewith5/8"studor1/2"stud,andthreesize ratings dependant on engine/powertrain packageweight.

DF-3304, DF-3306, DF-3307 Series Engine Mount TheDF-3300Series featuresheavydutyaluminumalloyconstructionwithlipincorporatedinthetopofthecastingto resist the upward pull of the engine. Durable oil andfuelresistantelastomerelementraisedabovetopofthecasting to accommodate engine mounting angles. Lowprofile mount-requires only 2 7/8" minimum clearancefromcastingbasetotopoflevelingnut.Failsafedesign-bottompadpreventsexcessiveimpact.Easyinstallationwiththreadedstudforverticalheightandslottedcastingforhorizontaladjustment.Studfurnishedwiththreenuts.Leveling, locking and secondary lock. Aluminum basecastwith1/2"slottedholesfor1/2"boltsorlagscrews.All steel parts are zinc dichromate plated for corrosionresistance.Availablewith3/4"stud in threesize ratingsdependantonengine/powertrainpackageweight. SuggeSteD MountIngS:

engine Weights 4 point Mountings 750to1,000lbs DF-3304-3 1,000to1,400lbs DF-3306-3 1,400to1,600lbs DF-3307-3

Driv

elin

e &

eng

ine

Mou

ntin

g


349

engine Mounting I


engine Weights 4 point Mountings 1,400to1,800lbs DF-4405-4 1,800to2,200lbs DF-4406-4 2,200to2,500lbs DF-4407-4 2,500to2,800lbs DF-4408-4

DF-4405, DF-4406, Df-04407, DF-4408 Series Engine MountTheDF-4400Seriesofheavydutymountingsisdesignedprincipally for diesel engines in the 1,400 - 2,800 lb.range.Basecasting featuresheavydutyaluminumalloyconstruction,withlipincorporatedinthetopofthecastingtoresisttheupwardpulloftheengine-coatedblacktoresistcorrosion.Durableoiland fuel resistantelastomerelement.Lowprofilemount-requiresonly33/8"minimumclearance from casting base to top of leveling nut. Failsafedesign-bottompadpreventsexcessiveimpact.Easyinstallationwithfull1"threadedstudforverticalheightandslotted casting for horizontal adjustment. Mounts comecomplete-furnishedwiththreenuts:leveling,lockingandsecondary lock. Aluminum base cast with 1/2" slottedmountingholesfor1/2"boltsorlagscrewson5"centers.All steel parts are Zinc plated for corrosion resistance.Availableinfoursizeratings(shownbelow)dependantonengine/powertrainpackageweight.

DF-4425, DF-4226, DF-4227, DF-4228 Series Engine Mount The DF-4420 Series of heavy duty mountings is a twinstud double mount designed principally for dieselenginesinexcessof2,800lbs.upto5,600lbs.inweight.Thesemountsaregenerally usedon the “heavy (marinetransmission)end"oftheenginealongwithDF-4400Seriesmounts on the front of the engine. Durable oil and fuelresistantelastomerelement.Lowprofilemount-requiresonly33/8"minimumclearancefromcastingbasetotopof leveling nut. Fail safe design - bottom pad preventsexcessive impact. Easy installation with full 1" threadedstudsforverticalheightandslottedcastingforhorizontaladjustment.Mountscomecomplete-furnishedwiththreenuts:leveling,lockingandsecondarylock.Aluminumbasecastwith1/2"slottedmountingholesfor1/2"boltsorlagscrews on 9" centers. All steel parts are zinc plated forcorrosionresistance.Availableinfoursizeratings(shownbelow)dependantonengine/powertrainpackageweight.


engine Weights 4 point Mountings 2,800to3,600lbs DF-4425-4 3,600to4,400lbs DF-4426-4 4,400to5,000lbs DF-4427-4 5,000to5,600lbs DF-4428-4

Driveline & engine

Mounting


350

engine MountingI


engine Weights 4 point Mountings 1,800to2,400lbs DF-9106

DF-9106 Series Engine Mount The DF-9106 Engine Isolator Mount is specificallydesignedforIn-LineSixCylinderDieselconfigurationsinthe300-485Horsepowerrange.Thismountisaprovendesign developed to absorb the angular prop thrustloadsexertedatpeaktorqueminimizingforwardangularmovementaswellassidetosidemovementinroughseas.Featuresaheavydutyaluminumcasting-withdurableoiland fuel resistantelastomerelement.Lowprofilemount- requires only 3 1/2" minimum clearance from base totop of leveling nut. Mount comes complete - furnishedwiththreenuts:leveling,lockingandfullsecondarylock,plustwowashers.Easy installationwith full1" threadedstud for vertical height adjustment, and aluminum basecast with 1/2" slotted mounting holes for 1/2" bolts orlagscrewson5"centers.Studs,nutsandwasherszincplatedtoresistcorrosion.

RM-1060 Engine MountTheRM-1060RearInboardMountspecificallydevelopedfor the transmission end of marine engine inboardapplications. This mount provides a fail safe designdeveloped to absorb the angular prop thrust loadsexertedatpeaktorqueminimizingforwardangularmountmovement.Featuresaheavydutycasting-coatedblacktoresistcorrosion.Durableoilandfuelresistantelastomerelement.Lowprofilemount-requiresonly23/8"minimumclearance from base to top of leveling nut - allows theenginetobe installed lower in theboat inspace limitedinstillations.Easyinstallationwithzincdichromateplated3/4"threadedstudforverticalheightadjustment,and4"mountingholecentersfor1/2"boltsorlagscrews.


GasInboardInstallationsEngineTransmissionEnd

120-575HP

Driv

elin

e &

eng

ine

Mou

ntin

g


351

Driveline & engine

Mounting

I

Flax PackingFlaxpackingisthestandardreplacementproductforstuffingboxesworldwide.Thispackingisbraidedfromqualityrovingsandisthenimpregnatedwithagenerousamountoflubricationmaterial.Theresultisaqualitypackingatacompetitivecost.TempLimitPSILimitFPMLimit200F150psi1900

Model Description Master pack

10001 2’x1/8”Coil 12Packs10002 2’x3/16”Coil 12Packs10003 2’x1/4”Coil 12Packs10004 2’x5/16”Coil 12Packs10005 2’x3/8”Coil 12Packs10006 2’x7/16”Coil 12Packs10007 2’x1/2”Coil 12Packs10008 2’x5/8”Coil 12Packs

PTFE Flax PackingPTFEPackingisflaxpackingbraidedfromstrongrovingsandthenimpregnatedwithTeflon®(PTFE).Thiscombinationoffershigherperformanceandlongerpackinglife.TempLimitPSILimitFPMLimit220F160psi1900.



Tefpack® Synthetic PackingTefpack®shaftpackingisauniqueproduct.ItisconstructedfromastrongsyntheticyarnandisthenimpregnatedwithTeflon®.Thesyntheticyarnisnotsubjecttoattackbythemildew/rotcycleTempLimitPSILimitFPMLimit500F500psi1900.



Drip-free packing


352

Driv

elin

e &

eng

ine

Mou

ntin

g

I

Graphtec Graphite PackingGRAPHTECshaftpackingisthecombinationofgraphitebraidedfibers,imprgnatedwithPTFTtoproduceapackingthatwillgivetheultimatelevelofperformance.TempLimitPSILimit1200F2800psi.



Graphtex Ultra (GTU) Shaft PackingGraphtexUltra(GTU)shaftpackingisfuturetechnologythatisavailablenow.GTUpackingisauniqueblendofW.L.GOREfibersandgraphitefibersthatareimpregnatedwithPTFE.ThiscombinationoffibersproducesapackingthatisTHERMALCONDUCTIVE,strongandverydurable.TheTHERMALCONDUCTIVEfeaturedissipatesheatawayfromthestuffingboxallowingittoruncoolerandmoreefficient.


10240 1/8” 6EA

10241 3/16” 6EA

10242 1/4” 6EA

10243 5/16” 6EA

10244 3/8” 6EA

10245 7/16” 6EA

10246 1/2’ 6EA

10247 5/8’ 6EA

Syntef® Shaft LubricantModel Description Master pack10150 SYNTEFShaftLubricant1oz. 12ea.

Drip Less® Moldable PTFE Packing

Model Description Master pack10146 Drip-FreeStarterKit 6Kits PacksUpToEight(8) RingsWillPack11/2”Shaft PacksUpToEight(8) 6Kits ToFifteen(15)Rings RingsWillPack3”

Drip-free packing


353

the Drivesaver™ I

Total Protection for Your Drive Train

Absorbs vibration, reducing noise. The drivesaver provides a flexible, non-metallic barrier betweenyour transmissionandshaft. Thisbarrier reducesnotonlydrivetrain vibration, but the transmission of vibration and noise toyou,yourcrewandthewater.Bothyouandyourvesselaremoreefficientinthisquieterenvironment.

Absorbs shock. The drivesaver effectively absorbs thrust and torque from the propeller shaft aswellasexcessiveshockfromchanginggearsandhighspeedplaning.Italsohelpscontroldamageandmisalignmentfromtorsionalenginemovement.Anditkeepsonworking,undernormalconditions,forthelifeofthedrivetrain,withnolubricationormaintenance.

prevents electrolysis. Thedrivesaverprovidesanimperviousbarrierthatblockselectricalcurrentsfromthewater.Yourengineandtransmissionareprotectedfromdamagingcorrosion.

Acts as a circuit breaker. Repeatusersof thedrivesaver installnewonesnotbecauseanoldoneworeout,butbecauseofahiddenlog,line,orrockthatdestroyedthecoupling.That’sright,thedrivesaverwasdestroyed,notthecostlytransmissionandengine.Byactinglikeacircuitbreaker,thedrivesaverabsorbstheextremeshockandtorqueofcollision,breaksapart,andleavesyourtransmissionandengineintact.You’rebackinoperation

faster,ataminimumcost.That’sthekindoftotalprotectionyoucan’taffordtobewithout!

Installs easily. Thedrivesaverinstallssimplyandquickly.WIthoutcuttingormachiningtheshaft.Andwithouthaulingyourboatoutofthewater.Justseparatethedriveflanges,insertthecoupling,alignandbolt.

Todeterminetorqueratingusethisformula:Enginehorsepowerx5252xreductionratio

EngineR.P.M.

Driveline & engine

Mounting


354

Drivesaver™ SpecificationsI

Model Flange # of Bolt Bolt Pilot Coupling Coupling Packaged torque Plus rated Diameter Bolts Diameter Circle Diameter Diameter thickness Weight (lbs) rating (ft lb) ft/lb)

303 3 3 3/8 2-1/2 1-3/4 4 11/16 1 225353 3-1/2 3 3/8 2-3/4 1-7/8 4-5/16 11/16 1-1/4 250354 3-1/2 4 8mm 2-15/16 1-9/16 4-1/4 1 1-1/2 300404 4 4 3/8 3-1/4 2 5 1 1-3/4 550404A 4 4 3/8 3-1/4 2-1/2 5 1 1-3/4 550404AC 4 4 3/8 3-1/4 2-5/8 5 1 1-3/4 550404V 4 4 10mm 8cm 6cm 5 1 1-3/4 550404S 4 4 3/8 9cm 6cm 5-1/4 1 2-1/4 550424Y 100mm 4 10mm 78mm 50mm 4-1/4 1 1-3/4 550454 4-1/2 4 3/8 3-3/4 2-5/8 5-3/8 1 2-1/4 5704756 4-3/4 6 7/16 3-7/8 2-1/2 5-3/8 1 2-3/4 675 1600504 5 4 7/16 4-1/4 2-1/2 6 1 2-1/2 675 1600504A 5 4 3/8 4-1/8 2-3/4 6 1 2-1/2 675504AC 5 4 7/16 4-1/8 2-7/8 6 1 2-1/2 675504H 5 4 7/16 4-1/4 2-1/2 5-1/8* 1 2-1/2 675 1600524Y 120mm 4 10mm 100mm 65mm 5-1/4 1 2-1/4 675554 5-1/2 4 3/8 4-5/8 3-1/8 6-1/2 1 3 7205756 5-3/4 6 1/2 4-3/4 3 6-13/16 1-1/8 4-1/4 1800 30005756A 5-3/4 6 1/2 4-3/4 3 6-3/8 1-1/8 4 1800 30006256 6-1/4 6 7/17 5-3/8 3-1/4 7-1/4 1-1/16 4-1/4 19007256 7-1/4 6 5/8 6 3-3/4 8-3/8 1-3/16 8 3200 44007306Z 7-1/4 6 5/8 6 3-3/4 7-1/4 1-3/16 8 2200 32007258Z 7-1/4 8 5/8 6 3-3/4 7-1/4 1-1/4 8 32008078Z 8-1/16 8 5/8 6-11/16 5-1/2 8-1/16 1-3/4 7-1/2 3300 48008010Z 205mm 10 14mm 170mm 140mm 8-5/16 1-1/2 9 33008858Z 225mm 8 14mm 196mm 140mm 9-1/8 1-1/2 9-1/4 3500908 9 8 5/8 7-1/2 6 11 1-3/8 12-1/2 3000 4900908A 9 8 5/8 7-3/4 5-1/8 11 1-3/8 12 3000 4900908S 9 8 5/8 7-1/2 6 9-1/8 1-3/8 9 3000 4900908AC 190mm 8 15mm 155mm 100mm 228mm 1 9 3000 49001058 10-1/2 8 3/4 8-3/4 5 12-1/2 1-3/4 22 4200 65001108 11 8 3/4 9-1/2 6 13-1/4 1-13/16 23-1/2 4200 65001108A 11 8 3/4 9 6 11-3/4 1-3/4 17-1/2 3000 49001308 13 8 7/8 11 7 14 2 18-1/2 4400 6700

*Outside diameter is machined at an angle, with the smaller side to the reverse gear to allow for clearance.

Elastomer, a stiff, yet resilient material, has excellent energyabsorbingproperties.Itwillremainitsdesigncharacteristicsovera long period of time and will return to original shape even afterbeingundercompression.Itwithstandsoil,sludge,saltwaterandatemperaturerangeof-65oto+225oF.Allmetalcomponentsandhardwareareplatedforcorrosionresistanceandlonglife.Model5756,7256,908,1058,1108,1308,8010,and8858maybeusedbetweenflangeswithaboltholesizelargerthantheboltsfurnishedwith The Drivesaver. Specify model number plus the suffix B.BushingtofittheflangewillbefurnishedwithTheDrivesaver.

BuShIng kItS

5756 5/8”to1/2”7256 3/4”to5/8”908 3/4”to5/8”908BB 7/8”to5/8”1058 1”to3/4”1108 1”to3/4”8010 18.3mmto14mm8858 17mmto14mm

Driv

elin

e &

eng

ine

Mou

ntin

g


355

Drivesaver™ Selection guide - By engine I

Model reduction ratio Drivesaver Model

AllisonM.M15L,M20L................................................................................. 7256MH................................................................................................... 908BHYH/HP7700(9.00)........................................................................... 908A

CApitol2HD-200,5HD-200......................................................................... 4756AHE10200,HE10250........................................................................ 5756AHE10700,HE10750.......................................................................... 7256HE11200,HE12400.......................................................................... 5756HE11700.......................................................................................... 7256HP500,HP6900................................................................................ 7256HY400,HY6900................................................................................ 7256HY22000,HY24000.......................................................................... 7256HY25000,HY28000.......................................................................... 7256M-105,M-125.................................................................................. 5756

CrusAder4500Series...................................................................................... 404A

HurtH/ZFHBW5,10,15,15V,18,20................................................................ 404AHBW30,35,50,100,125.................................................................. 404AHBW150,150A,150V,220................................................................. 404AHBW250........................................................................................... 404AHBW360,360A,400,450.................................................................... 504HBW600,630..................................................................................... 504HBW710,710A................................................................................. 5756HBW710........................................4.35....................................... 7256HSW150H,450D............................................................................... 404AHSW450A,450H............................................................................... 504HHSW630A,630D,630H....................................................................... 504HSW800A,800V,1250A.................................................................... 5756

newAgePRMDelta......................................................................................... 404APRM210/160...................................................................................... 504PRM60,PRM601,601A..................................................................... 7256PRM401,601,602.....................1.19,1.5,2,2.8.............................. 5756

pArAgonHB,HF,RO.......................................................................................... 404P13,P200,P300,PV300................................................................. 404ACRA,PV400........................................................................................... 454P400................................................................................................. 504APL,P15,PM,PMB........................................................................... 504ACRB...................................................................................................... 554RC.................................................................................................... 6256SAOD.................................................................................................. 303

sAABG,H..................................................................................................... 354HG,2HG,GG,2H,2GRG..................................................................... 404S

loHmAnn/stAlterGVV200A........................................................................................ 908AC

spiCer (callfordetails)1310/1350(U-Joint)................................................................MRD504PR

Model reduction ratio Drivesaver Model

twin disCMG502,502-1.................................................................................. 4756MG506,506-1,506A................1.1,1.5,2,2.5,3........................... 5756BMG506,506-1,506A....................... 4.0,4.5.................................. 7256BMG507-1,507-2,507A.................. 1.1,1.5,2................................ 5756BMG507A-1..................................... 1.1,1.5,2................................ 5756BMG507-1,507A.................................2.5,3.................................... 7256BMG509............................................1.5,2,3.................................. 7256BMG510,510A.............................. 1.5,2,2.5,3................................ 908BMG509,510................................... 4,4.5,5.1................................ 1058BMG516............................................................................................. 1108MG518-1DC................................................................................... 1108AMG527........................................ 2,2.9,3.8,5.............................. 1308BMG5050.5050A,5050V.................................................................. 5756BMG5050,5051A........................................................................... 5756ABMG5061,5061A,5061V........... 1.1,1.5,2,2.5,3.......................... 5756BMG5091SC..................................................................................... 7256BMG5101DC.................................... 4,4.5,5.1................................ 1058BMG5111DC,5114CHP....................4,4.5,5.1................................ 1058BMG5111(9’FLange)....................................................................... 908BBMG5111(10-1/2”Flange)............................................................... 1058BMG5111SC.................................. 1.5,2,2.5,3................................ 908BMG114A....................................................................................... 908SBB

universAlAtomic4............................................................................................. 353

volvoMB10A,MD7A,MD11C......................................................................404VMD38,MS2B,2000Series.................................................................404VMS3,MS4A......................................................................................... 504

wArner1004,1005,1013,1014..................................................................... 5041017,1018,2001,2002..................................................................... 50472C.................................................................................................... 5041006,1026,73C............................................................................... 575670C,71C.......................................................................................... 404A

YAnmAr20M,20H/G,GMSeries......................................................................424YKBW10,KM2Series...........................................................................424YKM3ASeries,YP-7M..........................................................................424Y30M,30H/G,KH18,KM4A..................................................................524YYP-10M.............................................................................................524Y

ZFIRM41A2,41A3,50A3......................................................................... 504IRM50A4,V2,V3................................................................................. 504IRM220,220A-1,225A..................................................................... 4756IRM301A-1,301P2-2...................................................................... 5756AIRM310............................................................................................7306ZIRM310A..........................................................................................7258ZIRM320........................................................................................... 1058BIRM320AL/LAV.............................................................................. 8858ZBIRM350............................................................................................8078ZIRM350AL/PL................................................................................ 8010ZB

ZF installations: Please check # of bolts & pilot configurations.

Driveline & engine

Mounting


356

engine MountsI

Ever-Stay™ Engine MountsThe Ever-Stay™ engine mounts are cast molded from two hardnesses of elastomers. The softer inner core provides vibration, noise and shock dampening, while the stiff outer shell restricts engine movement. They are easy to install with a wide range of sizes to fit almost every engine requirement.

Enduro-Mount™ Engine MountsTheEnduro-Mount™enginemountsarecastmoldedfromtwohardnessesofelastomers.Thesofterinnercoreprovidesvibration,noiseandshockdampening,whilethestiffoutershellrestrictsenginemovement.Theyareeasytoinstallandwillhaveawiderangeofsizestofitalmosteveryenginerequirement.

Alignment WedgesDesignedspecificallyforusewithGlobeenginemounts,thesewedgesallowenginealignmenttomicrometertolerances.Ratedloadis1500lbs.(50lbspersquareinchareaandthereforemayusedinpairsasvibrationdampeningpads.Thesewedgesaremaintainedfreeandalsoimpervioustogas,oil,greasesludgeandsaltwater.

Driv

elin

e &

eng

ine

Mou

ntin

g


357

Standard Brass Sleeve Series I

PART CODE UNIT SHAFT OUTSIDE LENGTH METAL

NO. NAME WT. DIA. (A) DIA. (B) INCH (C) WALL (D)

E00100 ALBACORE 0.50 3/4 1-1/4 3 1/8E00200 BLENNY 0.31 7/8 1-1/4 3-1/2 1/16E00300 BARRACUDA 0.69 7/8 1-3/8 3-1/2 1/8E00400 BASS 0.75 7/8 1-1/2 3-1/2 1/8E00500 BETTA 0.13 1 1-1/4 3 1/32E00600 BLACKFISH 0.31 1 1-1/4 4 1/32E00700 BLOATER 0.38 1 1-3/8 4 1/16E00800 BONITO 0.81 1 1-1/2 4 1/8E00900 BROADBILL 0.88 1 1-5/8 4 1/8

E01000 BULLHEAD 1.25 1 2 4 1/8E01100 CAMA 0.50 1-1/8 1-1/2 4-1/2 1/16E00650 CARIBE 0.47 1 1-1/4 6 1/32E01200 CARP 1.00 1-1/8 1-5/8 4-1/2 1/8E01300 CATFISH 1.19 1-1/8 1-3/4 4-1/2 1/8E01400 CHOBIE 1.38 1-1/8 2 4-1/2 1/8E01500 CHOGSET 0.50 1-1/4 1-1/2 5 1/8E01600 CHUB 1.13 1-1/4 1-3/4 5 1/8E01700 COD 1.50 1-1/4 2 5 1/8

E01800 CROAKER 1.75 1-1/4 2-1/8 5 1/8E01900 DEVILFISH 1.44 1-3/8 1-7/8 5-1/2 1/8E02000 DOGFISH 1.69 1-3/8 2 5-1/2 1/8E02100 DOLPHIN 1.75 1-3/8 2-1/8 5-1/2 1/8E02200 EEL 2.13 1-3/8 2-3/8 5-1/2 1/8E02300 FLAMEN 1.13 1-1/2 2 4-3/8 1/8E02400 FLATFISH 1.63 1-1/2 2 6 1/8E02500 FLOUNDER 2.19 1-1/2 2-3/8 6 1/8E02600 GAR 1.88 1-5/8 2-1/8 6-1/2 1/8

E02700 GRAYBACK 2.75 1-5/8 2-5/8 6-1/2 1/8E02800 GROUPER 2.38 1-3/4 2-3/8 7 1/8E02900 HADDO 2.81 1-3/4 2-5/8 7 1/8E03000 HAKE 3.00 1-7/8 2-5/8 7-1/2 1/8E03100 HALIBUT 3.69 1-7/8 2-15/16 7-1/2 1/8E03200 HERRING 3.06 2 2-5/8 8 1/8E03300 KINGFISH 3.88 2 3 8 1/8E03350 LAMPREY 4.85 2 3 10 1/8E03400 MACKEREL 3.69 2-1/8 2-15/16 8-1/2 1/8

E03500 MANTA 4.50 2-1/8 3-1/8 8-1/2 1/8E03650 MARGATE 4.90 2-1/4 3 9 1/8E03600 MARLIN 3.94 2-1/4 2-15/16 9 1/8E03700 MINNOW 4.44 2-1/4 3-1/8 9 1/8E03800 MUDFISH 5.44 2-1/4 3-3/8 9 1/8E03900 MULLET 5.44 2-3/8 3-3/8 9-1/2 1/8E04000 MUSKY 4.63 2-1/2 3-1/8 10 1/8E04100 PERCH 5.50 2-1/2 3-3/8 10 1/8E04200 PICKEREL 5.75 2-5/8 3-3/8 10-1/2 1/8

E04300 PICUDA 5.63 2-3/4 3-3/8 11 1/8E04150 PIKE 6.47 2-1/2 3-1/2 10 1/8E04400 PINFISH 6.88 2-3/4 3-3/4 11 1/8E04500 PORGY 7.13 2-7/8 3-3/4 11-1/2 1/8E04600 RAY 7.06 3 3-3/4 12 1/8E04700 REDFIN 7.94 3 4 12 1/8E04800 REDFISH 9.25 3-1/8 4-1/4 12-1/2 1/8E04900 ROCKFISH 8.13 3-1/4 4 13 1/8E05000 SAILFISH 9.38 3-1/4 4-1/4 13 1/8

E05100 SALMON 10.63 3-3/8 4-1/2 13-1/2 1/8E05200 SANDFISH 9.56 3-1/2 4-1/4 14 1/8E05300 SAWFISH 10.25 3-1/2 4-1/2 14 1/8E05400 SCULPIN 10.81 3-5/8 4-1/2 14-1/2 1/8

All materials meet U.S. Navy specification E05500 SHAD 11.00 3-3/4 4-1/2 15 1/8 MIL-B-17901B(SH) Class I E05600 SHARK 17.56 3-3/4 5 15 3/16

E05700 SILVERFISH 18.19 3-3/4 5-1/4 15 3/16E05800 SMELT 20.00 3-7/8 5-1/4 15-1/2 3/16E05900 SNAPPER 18.25 4 5 16 3/16

E06000 SOCKEYE 19.63 4 5-1/4 16 3/16E06100 SPEARFISH 20.06 4-1/8 5-1/4 16-1/2 3/16E06200 SQUIT 22.00 4-1/4 5-1/2 17 3/16E06300 STREAKER 24.31 4-3/8 5-3/4 17-1/2 3/16E06400 SUCKER 22.00 4-1/2 5-1/2 18 3/16E06500 SUNFISH 24.63 4-1/2 5-3/4 18 3/16E06600 SWORDFISH 34.00 4-5/8 6-1/8 18-1/2 1/4E06700 TARPON 34.00 4-3/4 6-1/8 19 1/4E06800 TROUT 33.00 4-7/8 6-1/8 19-1/2 1/4

E06900 WAHOO 35.00 5 6-1/8 20 1/4E07000 WALLEYE 39.00 5 6-1/2 20 1/4E07100 WANDTAIL 44.00 5-1/4 6-3/4 21 1/4E07200 WAP 48.00 5-1/4 7 21 1/4E07300 WARFISH 57.00 5-3/8 6-3/4 21-1/2 1/4E07400 WARSAW 62.00 5-3/8 7 21-1/2 1/4E07500 WHITEFISH 59.00 5-1/2 7 22 1/4E07600 WINDFISH 44.50 5-5/8 7 22-1/2 1/4E07700 YELLOWTAIL 48.00 5-3/4 7 23 1/4

E07800 YOWLING 52.00 5-7/8 7-1/2 24 1/4E07900 ZANCLUS 55.00 6 7-1/2 24 1/4

STANDARD BRASS SLEEVE SERIES

Morse Rubber LLC3588 Main Street

Keokuk, IA 52632 USAPh. (319) 524-8430Fax (319) 524-7290

Toll Free (USA & Can)800-553-7036

Rubber

A

D

Shaft Dia.

B

C

NavalBrass

Marine Bearings

unit ShaFt outSiDe length ShellPart # CoDe naMe Wt. Dia (a) Dia (B) inCh (C) Wall (D)

E00100 ALBACORE 0.50 3/4 1-1/4 3 1/8E00200 BLENNY 0.31 7/8 1-1/4 3-1/2 1/16E00300 BARRACUDA 0.69 7/8 1-3/8 3-1/2 1/8E00400 BASS 0.75 7/8 1-1/2 3-1/2 1/8E00500 BETTA 0.13 1 1-1/4 3 1/32E00600 BLACKFISH 0.31 1 1-1/4 4 1/32E00700 BLOATER 0.38 1 1-3/8 4 1/16E00800 BONITO 0.81 1 1-1/2 4 1/8E00900 BROADBILL 0.88 1 1-5/8 4 1/8E01000 BULLHEAD 1.25 1 2 4 1/8E01100 CAMA 0.50 1-1/8 1-1/2 4-1/2 1/16E00650 CARIBE 0.47 1 1-1/4 6 1/32E01200 CARP 1.00 1-1/8 1-5/8 4-1/2 1/8E01300 CATFISH 1.19 1-1/8 1-3/4 4-1/2 1/8E01400 CHOBIE 1.38 1-1/8 2 4-1/2 1/8E01500 CHOGSET 0.50 1-1/4 1-1/2 5 1/8E01600 CHUB 1.13 1-1/4 1-3/4 5 1/8E01700 COD 1.50 1-1/4 2 5 1/8E01800 CROAKER 1.75 1-1/4 2-1/8 5 1/8E01900 DEVILFISH 1.44 1-3/8 1-7/8 5-1/2 1/8E02000 DOGFISH 1.69 1-3/8 2 5-1/2 1/8E02100 DOLPHIN 1.75 1-3/8 2-1/8 5-1/2 1/8E02200 EEL 2.13 1-3/8 2-3/8 5-1/2 1/8E02300 FLAMEN 1.13 1-1/2 2 4-3/8 1/8E02400 FLATFISH 1.63 1-1/2 2 6 1/8E02500 FLOUNDER 2.19 1-1/2 2-3/8 6 1/8E02600 GAR 1.88 1-5/8 2-1/8 6-1/2 1/8E02700 GRAYBACK 2.75 1-5/8 2-5/8 6-1/2 1/8E02800 GROUPER 2.38 1-3/4 2-3/8 7 1/8E02900 HADDO 2.81 1-3/4 2-5/8 7 1/8E03000 HAKE 3.00 1-7/8 2-5/8 7-1/2 1/8E03100 HALIBUT 3.69 1-7/8 2-15/16 7-1/2 1/8E03200 HERRING 3.06 2 2-5/8 8 1/8E03300 KINGFISH 3.88 2 3 8 1/8E03350 LAMPREY 4.85 2 3 10 1/8E03400 MACKEREL 3.69 2-1/8 2-15/16 8-1/2 1/8E03500 MANTA 4.50 2-1/8 3-1/8 8-1/2 1/8E03650 MARGATE 4.90 2-1/4 3 9 1/8E03600 MARLIN 3.94 2-1/4 2-15/16 9 1/8E03700 MINNOW 4.44 2-1/4 3-1/8 9 1/8E03800 MUDFISH 5.44 2-1/4 3-3/8 9 1/8E03900 MULLET 5.44 2-3/8 3-3/8 9-1/2 1/8E04000 MUSKY 4.63 2-1/2 3-1/8 10 1/8E04100 PERCH 5.50 2-1/2 3-3/8 10 1/8E04200 PICKEREL 5.75 2-5/8 3-3/8 10-1/2 1/8E04300 PICUDA 5.63 2-3/4 3-3/8 11 1/8E04150 PIKE 6.47 2-1/2 3-1/2 10 1/8E04400 PINFISH 6.88 2-3/4 3-3/4 11 1/8E04500 PORGY 7.13 2-7/8 3-3/4 11-1/2 1/8E04600 RAY 7.06 3 3-3/4 12 1/8E04700 REDFIN 7.94 3 4 12 1/8E04800 REDFISH 9.25 3-1/8 4-1/4 12-1/2 1/8E04900 ROCKFISH 8.13 3-1/4 4 13 1/8E05000 SAILFISH 9.38 3-1/4 4-1/4 13 1/8E05100 SALMON 10.63 3-3/8 4-1/2 13-1/2 1/8E05200 SANDFISH 9.56 3-1/2 4-1/4 14 1/8E05300 SAWFISH 10.25 3-1/2 4-1/2 14 1/8


E05400 SCULPIN 10.81 3-5/8 4-1/2 14-1/2 1/8E05500 SHAD 11.00 3-3/4 4-1/2 15 1/8E05600 SHARK 17.56 3-3/4 5 15 3/16E05700 SILVERFISH 18.19 3-3/4 5-1/4 15 3/16E05800 SMELT 20.00 3-7/8 5-1/4 15-1/2 3/16E05900 SNAPPER 18.25 4 5 16 3/16E06000 SOCKEYE 19.63 4 5-1/4 16 3/16E06100 SPEARFISH 20.06 4-1/8 5-1/4 16-1/2 3/16E06200 SQUIT 22.00 4-1/4 5-1/2 17 3/16E06300 STREAKER 24.31 4-3/8 5-3/4 17-1/2 3/16E06400 SUCKER 22.00 4-1/2 5-1/2 18 3/16E06500 SUNFISH 24.63 4-1/2 5-3/4 18 3/16E06600 SWORDFISH 34.00 4-5/8 6-1/8 18-1/2 1/4E06700 TARPON 34.00 4-3/4 6-1/8 19 1/4E06800 TROUT 33.00 4-7/8 6-1/8 19-1/2 1/4E06900 WAHOO 35.00 5 6-1/8 20 1/4E07000 WALLEYE 39.00 5 6-1/2 20 1/4E07100 WANDTAIL 44.00 5-1/4 6-3/4 21 1/4E07200 WAP 48.00 5-1/4 7 21 1/4E07300 WARFISH 57.00 5-3/8 6-3/4 21-1/2 1/4E07400 WARSAW 62.00 5-3/8 7 21-1/2 1/4E07500 WHITEFISH 59.00 5-1/2 7 22 1/4E07600 WINDFISH 44.50 5-5/8 7 22-1/2 1/4E07700 YELLOWTAIL 48.00 5-3/4 7 23 1/4E07800 YOWLING 52.00 5-7/8 7-1/2 24 1/4E07900 ZANCLUS 55.00 6 7-1/2 24 1/4

Driveline & engine

Mounting


358

Standard non-Metallic SeriesI


EF0100 ADDER 0.13 3/4 1-1/4 3 1/8EF0200 AGII 0.19 7/8 1-3/8 3-1/2 1/8EF0300 ANCHOVY 0.19 7/8 1-1/2 3-1/2 1/8EF0350 ANABLEPS 0.15 1 1-1/4 4 1/32EF0375 ARROWANA 0.17 1 1-3/8 4 1/16EF0400 ANGEL 0.19 1 1-1/2 4 1/8EF0500 BARBEL 0.25 1 1-5/8 4 1/8EF0600 BILLFISH 0.50 1 2 4 1/8EF0650 BLOODFIN 0.40 1-1/8 1-1/2 4-1/2 1/16EF0700 BLUEFISH 0.25 1-1/8 1-5/8 4-1/2 1/8EF0800 BONE 0.31 1-1/8 1-3/4 4-1/2 1/8EF0900 BREAM 0.44 1-1/8 2 4-1/2 1/8EF0950 BRICHARDI 0.46 1-1/4 1-1/2 5 1/32EF1000 BRILL 0.25 1-1/4 1-3/4 5 1/8EF1100 BURBOT 0.50 1-1/4 2 5 1/8EF1200 CAPELIN 0.63 1-1/4 2-1/8 5 1/8EF1300 CHIRUS 0.44 1-3/8 1-7/8 5-1/2 1/8EF1400 CISCOES 0.50 1-3/8 2 5-1/2 1/8EF1500 COAL 0.63 1-3/8 2-1/8 5-1/2 1/8EF1600 CONEY 0.81 1-3/8 2-3/8 5-1/2 1/8EF1700 CORBINA 0.50 1-1/2 2 6 1/8EF1800 CRAIG 0.50 1-1/2 2-3/8 6 1/8EF1900 CRAMP 0.50 1-5/8 2-1/8 6-1/2 1/8EF2000 DIDON 1.13 1-5/8 2-5/8 6-1/2 1/8EF2100 DORADE 0.81 1-3/4 2-3/8 7 1/8EF2200 GERRES 1.00 1-3/4 2-5/8 7 1/8EF2300 GILTHEAD 1.00 1-7/8 2-5/8 7-1/2 1/8EF2400 GLOBE 1.50 1-7/8 2-15/16 7-1/2 1/8EF2500 GOBIE 0.94 2 2-5/8 8 1/8EF2600 GUPPY 1.56 2 3 8 1/8EF2700 HADDOCK 1.31 2-1/8 2-15/16 8-1/2 1/8EF2800 HAYHO 1.88 2-1/8 3-1/8 8-1/2 1/8EF2900 HOLIA 1.38 2-1/4 2-15/16 9 1/8EF3000 HOOPID 1.81 2-1/4 3-1/8 9 1/8EF3100 HORNED 2.19 2-1/4 3-3/8 9 1/8EF3200 JUREL 2.13 2-3/8 3-3/8 9-1/2 1/8EF3300 LAUNCE 1.44 2-1/2 3-1/8 10 1/8EF3400 LOACH 1.75 2-1/2 3-3/8 10 1/8EF3500 LUMP 1.81 2-5/8 3-3/8 10-1/2 1/8EF3600 MIDGE 1.75 2-3/4 3-3/8 11 1/8EF3700 MONDA 2.63 2-3/4 3-3/4 11 1/8EF3800 MORAY 2.56 2-7/8 3-3/4 11-1/2 1/8EF3900 NUMB 2.38 3 3-3/4 12 1/8EF4000 OARFISH 3.00 3 4 12 1/8EF4100 OX 3.75 3-1/8 4-1/4 12-1/2 1/8EF4200 ONO 2.75 3-1/4 4 13 1/8EF4300 PADDLE 3.50 3-1/4 4-1/4 13 1/8EF4400 PIPE 4.13 3-3/8 4-1/2 13-1/2 1/8EF4500 PLAICE 3.88 3-1/2 4-1/4 14 1/8EF4600 PILOT 4.00 3-1/2 4-1/2 14 1/8EF4700 PIPER 3.50 3-5/8 4-1/2 14-1/2 1/8EF4800 SPRAT 3.13 3-3/4 4-1/2 15 1/8EF4900 SALTIE 5.81 3-3/4 5 15 3/16EF5000 SOLE 7.13 3-3/4 5-1/4 15 3/16EF5100 SARDINE 6.38 3-7/8 5-1/4 15-1/2 3/16


EF5200 SKATE 4.75 4 5 16 3/16EF5300 SKITTLE 6.38 4 5-1/4 16 3/16EF5400 STAR 5.63 4-1/8 5-1/4 16-1/2 3/16EF5500 SAND 7.13 4-1/4 5-1/2 17 3/16EF5600 SPOTTED 8.81 4-3/8 5-3/4 17-1/2 3/16EF5700 STING 6.13 4-1/2 5-1/2 18 3/16EF5800 STRUGEON 8.13 4-1/2 5-3/4 18 3/16EF5900 STERLET 10.50 4-5/8 6-1/8 18-1/2 1/4EF6000 SEA 10.00 4-3/4 6-1/8 19 1/4EF6100 SCALD 9.31 4-7/8 6-1/8 19-1/2 1/4EF6200 SCARINA 8.50 5 6-1/8 20 1/4EF6300 SCOMBER 12.25 5 6-1/2 20 1/4EF6400 SEACAL 13.25 5-1/4 6-3/4 21 1/4EF6500 SHANNY 15.75 5-1/4 7 21 1/4EF6600 SKIPJACK 12.00 5-3/8 6-3/4 21-1/2 1/4EF6700 SCAD 14.00 5-3/8 7 21-1/2 1/4EF6800 TUNNY 13.50 5-1/2 7 22 1/4EF6900 SKIPPY 12.63 5-5/8 7 22-1/2 1/4EF7000 SNOOK 12.25 5-3/4 7 23 1/4EF7100 SPINOUS 18.00 5-7/8 7-1/2 24 1/4EF7200 SERRONO 16.00 6 7-1/2 24 1/4

PART CODE UNIT SHAFT OUTSIDE LENGTH SHELLNO. NAME WT. DIA. (A) DIA. (B) INCH (C) WALL (D)

EF0100 ADDER 0.13 3/4 1-1/4 3 1/8

EF0200 AGII 0.19 7/8 1-3/8 3-1/2 1/8EF0300 ANCHOVY 0.19 7/8 1-1/2 3-1/2 1/8EF0350 ANABLEPS 0.15 1 1-1/4 4 1/32EF0375 ARROWANA 0.17 1 1-3/8 4 1/16EF0400 ANGEL 0.19 1 1-1/2 4 1/8EF0500 BARBEL 0.25 1 1-5/8 4 1/8EF0600 BILLFISH 0.50 1 2 4 1/8EF0650 BLOODFIN 0.40 1-1/8 1-1/2 4-1/2 1/16

EF0700 BLUEFISH 0.25 1-1/8 1-5/8 4-1/2 1/8EF0800 BONE 0.31 1-1/8 1-3/4 4-1/2 1/8EF0900 BREAM 0.44 1-1/8 2 4-1/2 1/8EF0950 BRICHARDI 0.46 1-1/4 1-1/2 5 1/32EF1000 BRILL 0.25 1-1/4 1-3/4 5 1/8EF1100 BURBOT 0.50 1-1/4 2 5 1/8EF1200 CAPELIN 0.63 1-1/4 2-1/8 5 1/8EF1300 CHIRUS 0.44 1-3/8 1-7/8 5-1/2 1/8EF1400 CISCOES 0.50 1-3/8 2 5-1/2 1/8

EF1500 COAL 0.63 1-3/8 2-1/8 5-1/2 1/8EF1600 CONEY 0.81 1-3/8 2-3/8 5-1/2 1/8EF1700 CORBINA 0.50 1-1/2 2 6 1/8EF1800 CRAIG 0.50 1-1/2 2-3/8 6 1/8EF1900 CRAMP 0.50 1-5/8 2-1/8 6-1/2 1/8EF2000 DIDON 1.13 1-5/8 2-5/8 6-1/2 1/8EF2100 DORADE 0.81 1-3/4 2-3/8 7 1/8EF2200 GERRES 1.00 1-3/4 2-5/8 7 1/8EF2300 GILTHEAD 1.00 1-7/8 2-5/8 7-1/2 1/8

EF2400 GLOBE 1.50 1-7/8 2-15/16 7-1/2 1/8EF2500 GOBIE 0.94 2 2-5/8 8 1/8EF2600 GUPPY 1.56 2 3 8 1/8EF2700 HADDOCK 1.31 2-1/8 2-15/16 8-1/2 1/8EF2800 HAYHO 1.88 2-1/8 3-1/8 8-1/2 1/8EF2900 HOLIA 1.38 2-1/4 2-15/16 9 1/8EF3000 HOOPID 1.81 2-1/4 3-1/8 9 1/8EF3100 HORNED 2.19 2-1/4 3-3/8 9 1/8EF3200 JUREL 2.13 2-3/8 3-3/8 9-1/2 1/8

EF3300 LAUNCE 1.44 2-1/2 3-1/8 10 1/8EF3400 LOACH 1.75 2-1/2 3-3/8 10 1/8EF3500 LUMP 1.81 2-5/8 3-3/8 10-1/2 1/8EF3600 MIDGE 1.75 2-3/4 3-3/8 11 1/8EF3700 MONDA 2.63 2-3/4 3-3/4 11 1/8EF3800 MORAY 2.56 2-7/8 3-3/4 11-1/2 1/8EF3900 NUMB 2.38 3 3-3/4 12 1/8EF4000 OARFISH 3.00 3 4 12 1/8EF4100 OX 3.75 3-1/8 4-1/4 12-1/2 1/8

EF4200 ONO 2.75 3-1/4 4 13 1/8EF4300 PADDLE 3.50 3-1/4 4-1/4 13 1/8EF4400 PIPE 4.13 3-3/8 4-1/2 13-1/2 1/8EF4500 PLAICE 3.88 3-1/2 4-1/4 14 1/8EF4600 PILOT 4.00 3-1/2 4-1/2 14 1/8EF4700 PIPER 3.50 3-5/8 4-1/2 14-1/2 1/8EF4800 SPRAT 3.13 3-3/4 4-1/2 15 1/8EF4900 SALTIE 5.81 3-3/4 5 15 3/16EF5000 SOLE 7.13 3-3/4 5-1/4 15 3/16

EF5100 SARDINE 6.38 3-7/8 5-1/4 15-1/2 3/16EF5200 SKATE 4.75 4 5 16 3/16EF5300 SKITTLE 6.38 4 5-1/4 16 3/16EF5400 STAR 5.63 4-1/8 5-1/4 16-1/2 3/16EF5500 SAND 7.13 4-1/4 5-1/2 17 3/16EF5600 SPOTTED 8.81 4-3/8 5-3/4 17-1/2 3/16EF5700 STING 6.13 4-1/2 5-1/2 18 3/16EF5800 STRUGEON 8.13 4-1/2 5-3/4 18 3/16EF5900 STERLET 10.50 4-5/8 6-1/8 18-1/2 1/4

EF6000 SEA 10.00 4-3/4 6-1/8 19 1/4EF6100 SCALD 9.31 4-7/8 6-1/8 19-1/2 1/4EF6200 SCARINA 8.50 5 6-1/8 20 1/4EF6300 SCOMBER 12.25 5 6-1/2 20 1/4EF6400 SEACAL 13.25 5-1/4 6-3/4 21 1/4EF6500 SHANNY 15.75 5-1/4 7 21 1/4EF6600 SKIPJACK 12.00 5-3/8 6-3/4 21-1/2 1/4EF6700 SCAD 14.00 5-3/8 7 21-1/2 1/4EF6800 TUNNY 13.50 5-1/2 7 22 1/4

EF6900 SKIPPY 12.63 5-5/8 7 22-1/2 1/4EF7000 SNOOK 12.25 5-3/4 7 23 1/4EF7100 SPINOUS 18.00 5-7/8 7-1/2 24 1/4EF7200 SERRONO 16.00 6 7-1/2 24 1/4

STANDARD NON-METALLIC SERIES

�

�

Morse Rubber LLC3588 Main Street

Keokuk, IA 52632 USAPh. (319) 524-8430Fax (319) 524-7290

Toll Free (USA & Can)800-553-7036

�

MARINE BEARINGS

Rubber

A

D

Shaft Dia.

B

C

Non-MetallicShell

Driv

elin

e &

eng

ine

Mou

ntin

g


359

Brass flanged Series I

unit Wt ShaFt outSiDe length Met Wall FlangePart # CoDe naMe lBS. Dia (a) Dia (B) inCh (C) (g) (D x e)

E20100 Abalone 29 3” 4-1/4” 12” 1/2” 6-3/4x1/2E20200 Barnacle 30 3-1/4” 4-1/2” 13” 1/2” 7x1/2E20300 Crab 38 3-1/2” 4-7/8” 14” 1/2” 7-3/8X1/2E20400 Crawfish 45 3-3/4” 5-1/4” 15” 1/2” 7-3/4x1/2E20500 Lobster 50 4” 5-1/2” 16” 1/2” 8x1/2E20600 Mussel 55 4-1/4” 5-3/4” 17” 1/2” 8-1/4x1/2E20700 Nautilus 63 4-1/2” 6” 18” 1/2” 8-7/8x1/2E20800 Octopus 66 4-3/4” 6-1/4” 19” 1/2” 9-1/8x1/2E20900 Oyster 81 5” 6-3/4” 20” 9/16” 9-5/8x9/16E21000 Prawn 88 5-1/4” 6-7/8” 21” 9/16” 9-7/8x9/16E21100 Scallop 95 5-1/2” 7-1/4” 22” 9/16” 10-1/4x9/16E21200 Seahorse 98 5-3/4” 7-1/4” 23” 9/19” 10-1/4x9/16E21300 Shrimp 109 6” 7-3/4” 24” 9/16” 11x9/16E21400 Bark 101 6-1/4” 8” 22-1/2” 9/16” 10-5/8x9/16E21500 Brig 125 6-1/2” 8-3/8” 23-1/2” 9/16” 11x9/16E21600 Canoe 135 6-3/4” 8-3/4” 24-1/2” 9/16” 11-3/8x9/16E21700 Caravel 142 7” 9” 25-1/2” 9/16” 11-5/8x9/16E21800 Clipper 150 7-1/4” 9-1/4” 26-1/2” 9/16” 11-7/8x9/16E21900 Corsair 168 7-1/2” 9-5/8” 27-1/2” 9/16” 12-1/4x9/16E22000 Corvette 187 7-3/4” 9-7/8” 28-1/2” 9/16” 12-1/2x9/16E22100 Cutter 200 8” 10-1/4” 29-1/2” 5/8” 13-1/4x5/8E22200 Cutterine 232 8” 10-1/2” 29-1/2” 5/8” 13-1/4x5/8E22300 Dogger 230 8-1/4” 10-1/2” 30-1/2” 5/8” 13-1/2x5/8E22400 Frigate 235 8-1/2” 10-3/4” 31-1/2” 5/8” 13-3/5x5/8E22500 Galleon 240 8-3/4” 11” 32-1/2” 5/8” 14x5/8E22600 Gondola 255 9” 11-1/4” 33-1/2” 3/4” 14-1/4x3/4E22700 Ketch 275 9-1/4” 11-1/2” 34-1/2” 3/4” 14-5/8x3/4E22800 Outrigger 278 9-1/2” 11-3/4” 35-1/2” 3/4” 14-7/8x3/4E22900 Sampan 350 9-3/4” 12-1/8” 36-1/2” 3/4” 15-1/4x3/4E23000 Schooner 355 10” 12-3/8” 37-1/2” 3/4” 15-1/2x3/4E23100 Scooter 360 10-1/4” 12-5/8” 38-1/2” 3/4” 15-7/8x3/4E23200 Shallop 365 10-1/2” 12-7/8” 39-1/2” 3/4” 16-1/8x3/4E23300 Sloop 385 10-3/4” 13-1/8” 40-1/2” 3/4” 16-3/8x3/4E23400 Smack 438 11” 13-1/2” 41-1/2” 3/4” 17-1/4x3/4E23500 Snow 432 11-1/4” 13-3/4” 42-1/2” 3/4” 17-1/2x3/4E23600 Tartan 496 11-1/2” 14-1/8” 43-1/2” 3/4” 17-7/8x3/4E23700 Yacht 486 11-3/4” 14-3/8” 44-1/2” 3/4” 18-1/8x3/4E23800 Yawl 529 12” 14-3/4” 45-1/2” 3/4” 18-1/2x3/4

Part Code Unit Wt. Shaft Dia. O.D. Length Met. Wall FlangeNumber Name Lbs. A B C G D x EE20100 Abalone 29 3" 4-1/4" 12" 1/2" 6-3/4x1/2E20200 Barnacle 30 3-1/4" 4-1/2" 13" 1/2" 7x1/2E20300 Crab 38 3-1/2" 4-7/8" 14" 1/2" 7-3/8X1/2E20400 Crawfish 45 3-3/4" 5-1/4" 15" 1/2" 7-3/4x1/2E20500 Lobster 50 4" 5-1/2" 16" 1/2" 8x1/2E20600 Mussel 55 4-1/4" 5-3/4" 17" 1/2" 8-1/4x1/2E20700 Nautilus 63 4-1/2" 6" 18" 1/2" 8-7/8x1/2E20800 Octopus 66 4-3/4" 6-1/4" 19" 1/2" 9-1/8x1/2E20900 Oyster 81 5" 6-3/4" 20" 9/16" 9-5/8x9/16E21000 Prawn 88 5-1/4" 6-7/8" 21" 9/16" 9-7/8x9/16E21100 Scallop 95 5-1/2" 7-1/4" 22" 9/16" 10-1/4x9/16 E21200 Seahorse 98 5-3/4" 7-1/4" 23" 9/19" 10-1/4x9/16 E21300 Shrimp 109 6" 7-3/4" 24" 9/16" 11x9/16E21400 Bark 101 6-1/4" 8" 22-1/2" 9/16" 10-5/8x9/16E21500 Brig 125 6-1/2" 8-3/8" 23-1/2" 9/16" 11x9/16E21600 Canoe 135 6-3/4" 8-3/4" 24-1/2" 9/16" 11-3/8x9/16E21700 Caravel 142 7" 9" 25-1/2" 9/16" 11-5/8x9/16E21800 Clipper 150 7-1/4" 9-1/4" 26-1/2" 9/16" 11-7/8x9/16E21900 Corsair 168 7-1/2" 9-5/8" 27-1/2" 9/16" 12-1/4x9/16E22000 Corvette 187 7-3/4" 9-7/8" 28-1/2" 9/16" 12-1/2x9/16E22100 Cutter 200 8" 10-1/4" 29-1/2" 5/8" 13-1/4x5/8E22200 Cutterine 232 8" 10-1/2" 29-1/2" 5/8" 13-1/4x5/8E22300 Dogger 230 8-1/4" 10-1/2" 30-1/2" 5/8" 13-1/2x5/8E22400 Frigate 235 8-1/2" 10-3/4" 31-1/2" 5/8" 13-3/5x5/8E22500 Galleon 240 8-3/4" 11" 32-1/2" 5/8" 14x5/8E22600 Gondola 255 9" 11-1/4" 33-1/2" 3/4" 14-1/4x3/4E22700 Ketch 275 9-1/4" 11-1/2" 34-1/2" 3/4" 14-5/8x3/4E22800 Outrigger 278 9-1/2" 11-3/4" 35-1/2" 3/4" 14-7/8x3/4E22900 Sampan 350 9-3/4" 12-1/8" 36-1/2" 3/4" 15-1/4x3/4E23000 Schooner 355 10" 12-3/8" 37-1/2" 3/4" 15-1/2x3/4E23100 Scooter 360 10-1/4" 12-5/8" 38-1/2" 3/4" 15-7/8x3/4E23200 Shallop 365 10-1/2" 12-7/8" 39-1/2" 3/4" 16-1/8x3/4E23300 Sloop 385 10-3/4" 13-1/8" 40-1/2" 3/4" 16-3/8x3/4E23400 Smack 438 11" 13-1/2" 41-1/2" 3/4" 17-1/4x3/4E23500 Snow 432 11-1/4" 13-3/4" 42-1/2" 3/4" 17-1/2x3/4E23600 Tartan 496 11-1/2" 14-1/8" 43-1/2" 3/4" 17-7/8x3/4E23700 Yacht 486 11-3/4" 14-3/8" 44-1/2" 3/4" 18-1/8x3/4E23800 Yawl 529 12" 14-3/4" 45-1/2" 3/4" 18-1/2x3/4All materials meet U.S. Navy Specification MIL-B17901B(SH) Class II All materials meet U.S. Navy Specification MIL-B-17901B(SH) Class II

Morse Marine BearingsMorse Rubber LLCTel: 319 524 8430 Fax: 319 524 7290

Part Code Unit Wt. Shaft Dia. O.D. Length Met. Wall FlangeNumber Name Lbs. A B C G D x EE23900 Yanqui 545 12-1/4" 15" 46-1/2" 5/8" 18-3/4X3/4E24000 Yapok 545 12-1/2" 15-1/4" 47-1/2" 5/8" 19X3/4

Rubber

Naval Brass

C

E

D

A

G

B

Standard Brass Flanged Marine Bearings

BRASS FLANGED SERIES

Marine Bearings

More on next page

AllmaterialsmeetU.S.NavySpecificationMIL-B17901B(SH)ClassII

Driveline & engine

Mounting


360

Brass flanged Series ContinuedI

unit Wt ShaFt outSiDe length Met Wall FlangePart # CoDe naMe lBS. Dia (a) Dia (B) inCh (C) (g) (D x e)

E23900 Yanqui 545 12-1/4” 15” 46-1/2” 5/8” 18-3/4X3/4

E24000 Yapok 545 12-1/2” 15-1/4” 47-1/2” 5/8” 19X3/4

E24100 Yarborough 550 12-3/4” 15-/12” 48-1/2” 5/8” 19-1/4X3/4

E24200 Yataghan 563 13” 15-7/8” 50” 11/16” 19-5/8X7/8

E24300 Yoeman 610 13-1/4” 16-1/8” 51” 11/16” 19-7/8X7/8

E24400 York 640 13-1/2” 16-3/8” 52” 11/16” 20-1/8X7/8

E24500 Zephyr 650 13-3/4” 16-5/8” 53” 11/16” 20-3/8X7/8

E24600 Zeppelin 675 14” 16-7/8” 54” 11/16” 20-5/8X7/8

E24700 Zeppo 701 14-1/4” 17-1/8” 55” 11/16” 20-7/8X7/8

E24800 Zircon 754 14-1/2” 17-1/2” 56” 3/4” 21-1/4X7/8

E24900 Zodiac 775 14-3/4” 17-3/4” 57” 3/4” 21-1/2X7/8

E25000 Zulu 795 15” 18” 58” 3/4” 21-3/4X7/8

E24100 Yarborough 550 12-3/4" 15-/12" 48-1/2" 5/8" 19-1/4X3/4E24200 Yataghan 563 13" 15-7/8" 50" 11/16" 19-5/8X7/8E24300 Yoeman 610 13-1/4" 16-1/8" 51" 11/16" 19-7/8X7/8E24400 York 640 13-1/2" 16-3/8" 52" 11/16" 20-1/8X7/8E24500 Zephyr 650 13-3/4" 16-5/8" 53" 11/16" 20-3/8X7/8E24600 Zeppelin 675 14" 16-7/8" 54" 11/16" 20-5/8X7/8E24700 Zeppo 701 14-1/4" 17-1/8" 55" 11/16" 20-7/8X7/8E24800 Zircon 754 14-1/2" 17-1/2" 56" 3/4" 21-1/4X7/8E24900 Zodiac 775 14-3/4" 17-3/4" 57" 3/4" 21-1/2X7/8E25000 Zulu 795 15" 18" 58" 3/4" 21-3/4X7/8Non-standard sizes, materials and special features are available upon request.

FORWARD STERN TUBE SERIES

Part Unit Wt. Shaft Dia. O.D. Length Met.Wall Flange PilotNumber Lbs. AA BB CC GG DD x EE M x NFB1300 75 6" 7-3/4" 15" 3/8" 11-3/8x9/16 8x3/8FB1400 77 6-1/4" 8" 15" 3/8" 11-3/8x9/16 8x3/8FB1500 91 6-1/2" 8-3/8" 15" 7/16" 13-1/2x5/8 8-5/8x3/8FB1600 99 6-3/4" 8-3/4" 15" 7/16" 13-3/4x5/8 9x3/8FB1700 116 7" 9" 17-1/2" 7/16" 13-3/4x5/8 9x3/8FB1800 122 7-1/4" 9-1/4" 17-1/2" 7/16" 14-1/8x5/8 9-5/8x3/8FB1900 123 7-1/2" 9-5/8" 17-1/2" 7/16" 14-1/2x5/8 10x3/8FB2000 126 7-3/4" 9-7/8" 17-1/2" 1/2" 14-1/2x5/8 10x3/8FB2100 145 8" 10-1/4" 20" 1/2" 14-7/8x5/8 10-3/8x3/8FB2200 150 8" 10-1/2" 20" 1/2" 14-7/8x5/8 10-3/8x3/8FB2300 157 8-1/4" 10-1/2" 20" 1/2" 15-1/4x5/8 10-3/4x3/8FB2400 162 8-1/2" 10-3/4" 20" 1/2" 15-1/4x5/8 10-3/4x3/8FB2500 170 8-3/4" 11" 20" 1/2" 15-5/8x3/4 11-1/8x3/8FB2600 193 9" 11-1/4" 22-1/2" 1/2" 16x3/4 11-1/2x3/8FB2700 200 9-1/4" 11-1/2" 22-1/2" 1/2" 16x3/4 11-1/2x3/8FB2800 205 9-1/2" 11-3/4" 22-1/2" 1/2" 16-3/8x3/4 11-7/8x3/8FB2900 217 9-3/4" 12-1/8" 22-1/2" 9/16" 16-7/8x3/4 12-3/8x3/8FB3000 240 10" 12-3/8" 25" 9/16" 16-7/8x3/4 12-3/8x3/8FB3100 244 10-1/4" 12-5/8" 25" 9/16" 17-7/8x3/4 12-3/4x3/8FB3200 247 10-1/2" 12-7/8" 25" 9/16" 18-1/4x3/4 13-1/8x3/8FB3300 270 10-3/4' 13-1/8" 25" 9/16" 18-1/4x3/4 13-1/8x3/8FB3400 300 11" 13-1/2" 27-1/2" 9/16" 18-5/8x3/4 13-1/2x3/8FB3500 312 11-1/4" 13-3/4" 27-1/2" 9/16" 19x3/4 13-7/8x3/8FB3600 326 11-1/2" 14-1/8" 27-1/2" 5/8" 19x3/4 13-7/8x3/8FB3700 335 11-3/4" 14-3/8" 27-1/2" 5/8" 19-3/8x3/4 14-1/8x3/8FB3800 360 12" 14-3/4" 30" 5/8" 19-3/4x3/4 14-1/2x3/8All materials meet U.S. Navy Specification MIL-B-17901B(SH) Class II

Morse Marine BearingsMorse Rubber LLC 3588 Main St. Keokuk, IA 52632 USATel: 319 524 8430 Fax: 319 524 7290

Rubber

Naval Brass

CC

EE

DD

AA

GG

BB

Forward Stern Tube Flanged Marine Bearings

M

N

Our staff has over 150 years of combined knowledge in the marine industry. Let us help you

find the right part for your application. Give us a call at 800-779-2676 or 949-642-6800.

AllmaterialsmeetU.S.NavySpecificationMIL-B17901B(SH)ClassII

Driv

elin

e &

eng

ine

Mou

ntin

g


361

forward Stern tube Series I

unit Wt ShaFt Dia outSiDe Dia length Met Wall Flange PilotPart # lBS. aa BB CC gg DD x ee M x n

FB1300 75 6” 7-3/4” 15” 3/8” 11-3/8x9/16 8x3/8

FB1400 77 6-1/4” 8” 15” 3/8” 11-3/8x9/16 8x3/8

FB1500 91 6-1/2” 8-3/8” 15” 7/16” 13-1/2x5/8 8-5/8x3/8

FB1600 99 6-3/4” 8-3/4” 15” 7/16” 13-3/4x5/8 9x3/8

FB1700 116 7” 9” 17-1/2” 7/16” 13-3/4x5/8 9x3/8

FB1800 122 7-1/4” 9-1/4” 17-1/2” 7/16” 14-1/8x5/8 9-5/8x3/8

FB1900 123 7-1/2” 9-5/8” 17-1/2” 7/16” 14-1/2x5/8 10x3/8

FB2000 126 7-3/4” 9-7/8” 17-1/2” 1/2” 14-1/2x5/8 10x3/8

FB2100 145 8” 10-1/4” 20” 1/2” 14-7/8x5/8 10-3/8x3/8

FB2200 150 8” 10-1/2” 20” 1/2” 14-7/8x5/8 10-3/8x3/8

FB2300 157 8-1/4” 10-1/2” 20” 1/2” 15-1/4x5/8 10-3/4x3/8

FB2400 162 8-1/2” 10-3/4” 20” 1/2” 15-1/4x5/8 10-3/4x3/8

FB2500 170 8-3/4” 11” 20” 1/2” 15-5/8x3/4 11-1/8x3/8

FB2600 193 9” 11-1/4” 22-1/2” 1/2” 16x3/4 11-1/2x3/8

FB2700 200 9-1/4” 11-1/2” 22-1/2” 1/2” 16x3/4 11-1/2x3/8

FB2800 205 9-1/2” 11-3/4” 22-1/2” 1/2” 16-3/8x3/4 11-7/8x3/8

FB2900 217 9-3/4” 12-1/8” 22-1/2” 9/16” 16-7/8x3/4 12-3/8x3/8

FB3000 240 10” 12-3/8” 25” 9/16” 16-7/8x3/4 12-3/8x3/8

FB3100 244 10-1/4” 12-5/8” 25” 9/16” 17-7/8x3/4 12-3/4x3/8

FB3200 247 10-1/2” 12-7/8” 25” 9/16” 18-1/4x3/4 13-1/8x3/8

FB3300 270 10-3/4’ 13-1/8” 25” 9/16” 18-1/4x3/4 13-1/8x3/8

FB3400 300 11” 13-1/2” 27-1/2” 9/16” 18-5/8x3/4 13-1/2x3/8

FB3500 312 11-1/4” 13-3/4” 27-1/2” 9/16” 19x3/4 13-7/8x3/8

FB3600 326 11-1/2” 14-1/8” 27-1/2” 5/8” 19x3/4 13-7/8x3/8

FB3700 335 11-3/4” 14-3/8” 27-1/2” 5/8” 19-3/8x3/4 14-1/8x3/8

FB3800 360 12” 14-3/4” 30” 5/8” 19-3/4x3/4 14-1/2x3/8

E24100 Yarborough 550 12-3/4" 15-/12" 48-1/2" 5/8" 19-1/4X3/4E24200 Yataghan 563 13" 15-7/8" 50" 11/16" 19-5/8X7/8E24300 Yoeman 610 13-1/4" 16-1/8" 51" 11/16" 19-7/8X7/8E24400 York 640 13-1/2" 16-3/8" 52" 11/16" 20-1/8X7/8E24500 Zephyr 650 13-3/4" 16-5/8" 53" 11/16" 20-3/8X7/8E24600 Zeppelin 675 14" 16-7/8" 54" 11/16" 20-5/8X7/8E24700 Zeppo 701 14-1/4" 17-1/8" 55" 11/16" 20-7/8X7/8E24800 Zircon 754 14-1/2" 17-1/2" 56" 3/4" 21-1/4X7/8E24900 Zodiac 775 14-3/4" 17-3/4" 57" 3/4" 21-1/2X7/8E25000 Zulu 795 15" 18" 58" 3/4" 21-3/4X7/8Non-standard sizes, materials and special features are available upon request.

FORWARD STERN TUBE SERIES

Part Unit Wt. Shaft Dia. O.D. Length Met.Wall Flange PilotNumber Lbs. AA BB CC GG DD x EE M x NFB1300 75 6" 7-3/4" 15" 3/8" 11-3/8x9/16 8x3/8FB1400 77 6-1/4" 8" 15" 3/8" 11-3/8x9/16 8x3/8FB1500 91 6-1/2" 8-3/8" 15" 7/16" 13-1/2x5/8 8-5/8x3/8FB1600 99 6-3/4" 8-3/4" 15" 7/16" 13-3/4x5/8 9x3/8FB1700 116 7" 9" 17-1/2" 7/16" 13-3/4x5/8 9x3/8FB1800 122 7-1/4" 9-1/4" 17-1/2" 7/16" 14-1/8x5/8 9-5/8x3/8FB1900 123 7-1/2" 9-5/8" 17-1/2" 7/16" 14-1/2x5/8 10x3/8FB2000 126 7-3/4" 9-7/8" 17-1/2" 1/2" 14-1/2x5/8 10x3/8FB2100 145 8" 10-1/4" 20" 1/2" 14-7/8x5/8 10-3/8x3/8FB2200 150 8" 10-1/2" 20" 1/2" 14-7/8x5/8 10-3/8x3/8FB2300 157 8-1/4" 10-1/2" 20" 1/2" 15-1/4x5/8 10-3/4x3/8FB2400 162 8-1/2" 10-3/4" 20" 1/2" 15-1/4x5/8 10-3/4x3/8FB2500 170 8-3/4" 11" 20" 1/2" 15-5/8x3/4 11-1/8x3/8FB2600 193 9" 11-1/4" 22-1/2" 1/2" 16x3/4 11-1/2x3/8FB2700 200 9-1/4" 11-1/2" 22-1/2" 1/2" 16x3/4 11-1/2x3/8FB2800 205 9-1/2" 11-3/4" 22-1/2" 1/2" 16-3/8x3/4 11-7/8x3/8FB2900 217 9-3/4" 12-1/8" 22-1/2" 9/16" 16-7/8x3/4 12-3/8x3/8FB3000 240 10" 12-3/8" 25" 9/16" 16-7/8x3/4 12-3/8x3/8FB3100 244 10-1/4" 12-5/8" 25" 9/16" 17-7/8x3/4 12-3/4x3/8FB3200 247 10-1/2" 12-7/8" 25" 9/16" 18-1/4x3/4 13-1/8x3/8FB3300 270 10-3/4' 13-1/8" 25" 9/16" 18-1/4x3/4 13-1/8x3/8FB3400 300 11" 13-1/2" 27-1/2" 9/16" 18-5/8x3/4 13-1/2x3/8FB3500 312 11-1/4" 13-3/4" 27-1/2" 9/16" 19x3/4 13-7/8x3/8FB3600 326 11-1/2" 14-1/8" 27-1/2" 5/8" 19x3/4 13-7/8x3/8FB3700 335 11-3/4" 14-3/8" 27-1/2" 5/8" 19-3/8x3/4 14-1/8x3/8FB3800 360 12" 14-3/4" 30" 5/8" 19-3/4x3/4 14-1/2x3/8All materials meet U.S. Navy Specification MIL-B-17901B(SH) Class II

Morse Marine BearingsMorse Rubber LLC 3588 Main St. Keokuk, IA 52632 USATel: 319 524 8430 Fax: 319 524 7290

Rubber

Naval Brass

CC

EE

DD

AA

GG

BB

Forward Stern Tube Flanged Marine Bearings

M

N

AllmaterialsmeetU.S.NavySpecificationMIL-B-17901B(SH)ClassII

Driveline & engine

Mounting


362

Metric Series Standard Brass and non-MetallicI

inSiDe Dia outSiDe Dia length Part # Part # a B C BraSS non-MetalliC

20 35 80 BM0100 FM0100

22 35 88 BM0200 FM0200

25 40 100 BM0300 FM0300

28 42 112 BM0400 FM0400

30 45 120 BM0500 FM0500

32 45 128 BM0600 FM0600

35 50 140 BM0700 FM0700

38 55 152 BM0800 FM0800

40 55 160 BM0900 FM0900

42 60 168 BM1000 FM1000

45 65 180 BM1100 FM1100

50 70 200 BM1200 FM1200

55 75 220 BM1300 FM1300

60 80 240 BM1400 FM1400

65 85 260 BM1500 FM1500

70 90 280 BM1600 FM1600

75 95 300 BM1700 FM1700

80 100 320 BM1800 FM1800

85 105 340 BM1900 FM1900

90 110 360 BM2000 FM2000

95 115 380 BM2100 FM2100

100 125 400 BM2200 FM2200

105 130 420 BM2300 FM2300

110 135 440 BM2400 FM2400

115 145 460 BM2500 FM2500

120 155 480 BM2600 FM2600

125 165 500 BM2700 FM2700

130 170 520 BM2800 FM2800

135 170 540 BM2900 FM2900

140 180 560 BM3000 FM3000

145 180 580 BM3100 FM3100

150 190 600 BM3200 FM3200

155 190 620 BM3300 FM3300

StAnDArD BrASS SleeVeSleevebearingswithNavalBrassoutershellsuper-bondedtoaflutedrubberbearingsurface.Engineeredtomeetthetoughestservicerequirementsinmarineandindustrialapplications.

non-MetAllIC SleeVeThespecialshellusedinnon-metallicsleevebearingsprovidescorrosionandchemicalresistance,electricalinsulation,weightadvantage,andvirtuallynoswellinseawater.

MARINE BEARINGS

Part No. Part No.I.D. (A) O.D. (B) LNTH. (C) Brass Non-Metallic

20 35 80 BM0100 FM010022 35 88 BM0200 FM020025 40 100 BM0300 FM030028 42 112 BM0400 FM040030 45 120 BM0500 FM050032 45 128 BM0600 FM060035 50 140 BM0700 FM070038 55 152 BM0800 FM080040 55 160 BM0900 FM090042 60 168 BM1000 FM100045 65 180 BM1100 FM110050 70 200 BM1200 FM120055 75 220 BM1300 FM130060 80 240 BM1400 FM140065 85 260 BM1500 FM150070 90 280 BM1600 FM160075 95 300 BM1700 FM170080 100 320 BM1800 FM180085 105 340 BM1900 FM190090 110 360 BM2000 FM200095 115 380 BM2100 FM2100100 125 400 BM2200 FM2200105 130 420 BM2300 FM2300110 135 440 BM2400 FM2400115 145 460 BM2500 FM2500120 155 480 BM2600 FM2600125 165 500 BM2700 FM2700130 170 520 BM2800 FM2800135 170 540 BM2900 FM2900140 180 560 BM3000 FM3000145 180 580 BM3100 FM3100150 190 600 BM3200 FM3200155 190 620 BM3300 FM3300

Morse Marine BearingsMorse Rubber LLC3588 Main St.Keokuk, IA 52632 USATel: 319 524 8430 Fax: 319 524 7290

Dimensions (MM)

METRIC SERIES STANDARD BRASS SLEEVE

Sleeve bearings with Naval Brass outer shell super-bonded to a fluted rubber bearing surface.Engineered to meet the toughest service requirements in marine and industrial applications.

NON-METALLIC SLEEVEThe special shell used in non-metallic sleeve bearings provides corrosion and chemicalresistance, electrical insulation, weight advantage, and virtually no swell in sea water.

A

B

C Shaft Dia.

DIMenSIonS In MM

Driv

elin

e &

eng

ine

Mou

ntin

g


363

The Number One Selling Marine Mechanical SealThePSSShaftSeal is thenumberonesellingmarinemechanicalsealworldwideandisinstalledasstandardequipmentbymanyoftheworldsmostreputableboatbuilders/yards.ThePSSShaftSealisalsorecognizedasthepremiereretrofit(aftermarket)sealontheworldmarket.CertifiedbyBureauVeritas,ABS&Rina:Boatbuilders / yards recognize the advantages and valueof installingthePSSasiteliminatesthemaintenance,constantadjustment&costassociatedwithtraditionalpackingtypeglands.Asidefromthesebenefits,thePSSShaftSealhelpstoeliminatewater inthebilge(100%watertight)&weartothepropellershaft.ThePSSShaftSealcanbeeasilyretrofittedandisavailableforshaftsrangingfrom3/4"(20mm)to8"(205mm).

How Does The PSS Mechanical Shaft Seal Work?

The PSS Shaft Seal is a mechanical face seal thatis created between the flat surfaces of the rotatingstainless steel rotor and thestationarycarbonflange.Thestationarycarbonflangeisattachedtothevesselsstern tube with hose clamps and the carbon flangeisattached to the front sideof thebellowswithhoseclamps. The stainless steel rotor is fit on the shaft infront of the carbon flange. The stainless steel rotoris used to compress the bellows before the collar issecuredtotheshaftwithset-screws.Thiscompression(pre-load) maintains contact between the faces andallowsthePSStocompensateforthethrust fromthepropeller. The carbon flange is bored larger than theshaftdiameterallowingitto“float”aroundtheshaftandthuscompensateformostmisalignmentandvibrationproblems. The stainless steel collar is sealed to theshaft by two o-rings that are recessed into the boreof the collar. These o-rings rotate with the shaft andstainlesssteelrotoranddonotexperiencewearduringoperation.

Stuffing Box

Transmission

Hull

Stern Tube (Shaft Log)

Shaft

Rubber Hose

Classic Stuffing Box - Before

Transmission

Hull

Stern Tube (Shaft Log)

Shaft

CompressionLength

Classic Stuffing Box - After

pYI, Inc. Shaft Seals I

Driveline & engine

Mounting


364

Sizes 3/4" to 3 3/4" (20 mm - 95 mm) ShaftsI

HigH Density Carbon/grapHite FlangeThis space age composite is machined to shape. The face is then lapped to 4 light bands. Once installed and operational the carbon/graphite face will actually polish the stainless steel rotor face during the initial minutes of operation. This polishing process ensures a perfect seal and eliminates the necessity of a spray guard. The high density of this composite greatly increases its impact and wear resistance. At a maximum operating temperature of 500°F the carbon guards against any overheating situation unlike other seals using plastic derivatives. The carbon graphite flange should never need replacing under normal operating conditions.

allen HeaD set sCrewsAllen head set screws with cupped ends are threaded into the rotor and secured to the proper shaft. A second set screw is then threaded into each hole to secure the first screw and to prevent it from possibly backing out. The set screws also have an anti-vibration treatment applied.

bellowsThe EPDM bellows has a temperature rating of 300°F is resistant to petroleum based products and is very resistant to abrasions and set retention. It provides the best combination of durability, strength, and elasticity. The stern tube end of the bellow is available in 1/4" increments. both shaft and stern tube diameters are necessary when ordering.

3/4" - 3 3/4"20 mm - 95 mm

Shaft Sizes.

nylon Hose barb Fitting***The nylon hose barb fitting is threaded into the carbon flange. The Barb fitting is used to plumb water to the seal or to run a vent line.

stainless steel rotorThe one-piece stainless steel (Type 316) rotor is slid down and secured to the propeller shaft with double set screws after compression is applied to the bellows. Precision tolerances are maintained by computer controlled lathe. The stainless steel should never need replacing under normal operating conditions.

stern tube

Driv

elin

e &

eng

ine

Mou

ntin

g


365

Size 4" - 6" (100 mm - 150 mm) Shafts I

HigH Density Carbon/grapHite Flange(See opposite page for description).

ClotH inlay siliCone bellowsCloth inlay silicone bellow have a temperature rating of 400°F+, and rate resistant to petroleum based products and abrasions.

Double nylon Hose barb Fitting(See opposite page for description).

Double Hose ClampsTwo stainless steel hose clamps are used to secure the bellow at both the stern and flange ends.

stainwless steel Hoops

stern tube

316l stainless steel Compression Clamp

4" - 6" 100 mm - 150 mm

Shaft Sizes.

Driveline & engine

Mounting


366

pYI DimensionsI

Driv

elin

e &

eng

ine

Mou

ntin

g


Section I Contents - Boatswain's Locker I Contents BuCk AlgonquIn ... plers are cast from ductile...

Documents

Transcript of Section I Contents - Boatswain's Locker I Contents BuCk AlgonquIn ... plers are cast from ductile...