Section C

City of Miami Beach HVHZ Electronic Roof Permit FormSection C Page (Low Slope Roof Systems)

Fill in the specific roof assembly components. If a component is not required, insert not applicable (n/a) in the text box.

ROOF SYSTEM MANUFACTURER:

Product Approval (NOA): SystemType:

Wind Uplift Pressures, From RAS 128 or Sealed Calculations:(P1) Field: psf

(P2) Perimeters: psf

(P3) Corners: psf

Maximum Design Pressure From NOA: psf

Roof Slope: " : 12 Roof Mean Height: ft.

Parapet Walls: No Yes Parapet wall Height: ft.

Deck Type:

Support Spacing: " o/c

Alternate Deck Type:Existing Roof:

Fire Barrier:

Vapor Barrier:

Anchor Sheet:

Anchor Sheet Fastener / Bonding Material:

Insulation Base Layer Size & Thickness:

Insulation Base Layer Fastener / Bonding Material:

Insulation Top Layer Size & Thickness:

Insulation Top Layer Fastener / Bonding Material:

Base Sheet(s) & No. of Ply(s):

Base Sheet Fastener / Bonding Material:

Ply Sheet(s) & No. of Ply(s):

Ply Sheet Fastener / Bonding Material:

Top Ply:

Top Ply Fastening / Bonding Material:

Surfacing:SINGLE PLY MEMBRANE:

Single Ply Manufacturer / Type:

Single Ply Sheet Width: " 1/2 Sheet Width: "

No. of Single Ply 1/2 sheets:

Single Ply Membrane Fastening / Bonding Material:

FASTENER SPACING FOR BASESHEET ATTACHMENTSINGLE PLY MEMBRANE ATTACHMENT

1. Field: " o/c @ Laps & rows " o/c

2. Perimeter: " o/c @ Laps & rows " o/c

3. Corner: " o/c @ Laps & rows " o/c

NUMBER OF FASTENERS PER INSULATION BOARD:

1. Field: 2. Perimeter: 3. Corner:

Insulation Fastener Type :

WOOD NAILER TYPE AND SIZE:

Wood Nailer Fastener Type and Spacing:

EDGE & COPING METAL SIZES:Edge Metal Material:

Edge Size:

Hook Strip Size:Edge Metal Attachment:

Coping Material:

Coping Size:

Hook Strip Size:Parapet Coping Metal Attachment: