SECTION 5: FRAMELESS BALUSTRADE SYSTEMS INDEX · Duplex 2205. Stainless Steel Satin finish....

5 Lady Fisher Place, Highbrook, Auckland PO Box 58 144 Botany Auckland 2163

P 09 927 3000F 09 274 1100W www.metroglass.co.nz

Ex Auckland Store. All prices exclude G.S.T.

Frameless Glass Systems is a division of Metro Performance Glass

SECTION 5: FRAMELESS BALUSTRADE SYSTEMS INDEXProduct PageInfinity BA124 Face Fix Balustrade 5.1 - 5.4Infinity BA122 Base Fix Balustrade (Product details pending) 5.5 - 5.8 PosiGlaze Balustrade System, Components and Fixings 5.9 - 5.1450mm Face Fix Disc Fittings and 50mm Disc Components 5.15 - 5.16Fixing Components for 50mm Disc Fittings 5.1750mm Double Disc Setout Details 5.1875mm Face Fix Single Disc Fittings 5.19100mm Face Fix Single Disc Fittings 5.20Fixing Components for 75mm & 100mm Disc Fittings 5.21PF150 Face Fix Plate Fittings and Details 5.22 - 5.23Panel Clamps, Connector Rail, Handrail Section 5.24Glass Clamps 5.25Balustrade Stiffener Brackets 5.25ANautech Strut Post Face Fix / Base Fix 5.26 - 5.27Strut Post SP155 Base Fix 5.28 Strut Post PL400 Face Fix / PL200 Base Fix 5.29 - 5.30Laguna Pool Gate Hinges 5.31 - 5.32Malibu Hydraulic Pool Gate Hinges 5.33 - 5.34Pool Gate Latches 5.35 - 5.36Pool Gate Latch Glass Preparation 5.37 - 5.38Pool Gate Pivot Arms, Sealing Compound, Grout 5.39Ozone Pool Gate Components / Glass Cut Out / Setout 5.40 - 5.43Pool Gate Latch and Pivot Applications 5.44Link Rail S25 Railing System / Fixing Details 5.45 - 5.46Link Rail S40 Railing System / Fixing Details (Product details pending) 5.47 - 5.48Edgetec 220 Link Rail Components 5.48A - 5.48DBalustrade Handrail Brackets 5.49 - 5.50

Lead time and pricing available from customer services between 8am-5pm on 0800 545 800




FRAMELESS BALUSTRADE SYSTEMS

5.1

Infinity BA124 Glass Balustrade System is the ideal solution for face fix frameless glass balustrades.No holes are required in the glass panels, they are simple to install, align and adjust.Suitable for pool fencing and the following balustrade occupancy types – Residential A and C3, Commercial B, E and C3.Standard finish is natural anodised aluminium with mill finish and standard colour powder coat options also available.To order Infinity select the required quantity and lengths of front and rear covers, plus the required number of glass clamps. All system components can be selected on page 5.2.

124

64Front cover

Rear cover

Clamp kit

Fixing

Infinity BA124 Face Fix Glass Balustrade System

For protection against a fall, refer building code and / or any proprietary design document.






5.2

Product Code Description Price

RCI-118 Rear Cover – With bulb seal Acts as a template RC-118-N-5000 Natural AnodisedRC-118-N-2500 Natural Anodised

Per metre

RC-118-M-5000 Mill Alum FinishRC-118-M-2500 Mill Alum FinishStandard Dulux colours at the same price as Natural Anodised if 25lm or more. If less than 25lm then P.O.A.

FCI-124 Front Cover – With bulb seal FC124-N-5000 Natural AnodisedFC124-N-2500 Natural AnodisedFC124-M-5000 Mill Alum Finish FC124-M-2500 Mill Alum FinishStandard Dulux colours at the same price as Natural Anodised if 25lm or more. If less than 25lm then P.O.A.

CKI-12CKI-15

Clamp Kit CompleteClamp Kit for 12mm GlassClamp Kit for 15mm Glass

RSI-1 Rear Cover Spacer Plate 1mm to align rear cover if structure is not straight

Silver Frost Finish Mill Finish

RSI-5 Rear Cover Spacer Plate 5mm to align rear cover if structure is not straight

Silver Frost Finish Mill Finish

SOI-15 Stand Off Plate – 15mmWill stand the Infinity System 15mm off the structure

Silver Frost FinishMill Finish

ECI-124 End cap complete With plugs & screws

Natural AnodisedMill Finish

Infinity BA124 Glass Balustrade System Components

118

124

118

118

124

124

19

20

25





5.25A

Balustrade Stiffener BracketsProduct Code Description Price

SBW-15 Suit glass from 12 - 15.5mm.Stiffener bracket - No holes required.90° glass to wall.65mm x 55mm x 25mm. Duplex 2205. Stainless Steel Satin finish.

SB90-15 Suit glass from 12 - 15.5mm.Stiffener bracket - No holes required.90° glass to glass.82mm x 55mm x 25mm. Duplex 2205. Stainless Steel Satin finish.

SB180-15 Suit glass from 12 - 15.5mm.Stiffener bracket - No holes required.180° glass to glass.103mm overall x 25mm. Duplex 2205. Stainless Steel Satin finish.

SBW-21 Suit glass from 17.52 - 21.52mm.Stiffener bracket - No holes required.90° glass to wall.65mm x 55mm x 25mm. Duplex 2205. Stainless Steel Satin finish.

SB90-21 Suit glass from 17.52 - 21.52mm.Stiffener bracket - No holes required.90° glass to glass.88mm x 55mm x 25mm. Duplex 2205. Stainless Steel Satin finish.

SB180-21 Suit glass from 17.52 - 21.52mm.Stiffener bracket - No holes required.180° glass to glass.103mm overall x 25mm. Duplex 2205. Stainless Steel Satin finish.

All brackets are supplied with a selection of gaskets to suit glass thickness and includes stainless steel clamping plates.







5.3

Infinity BA124 Typical Installation Examples

Waterproof Timber Deck - M12 Coach Screw Occupancy Residential A & C3 only

Concrete Deck - M12 StudOccupancyResidential A & C3 = 12mm ToughenedCommercial B, E & C3 = 15mm Toughened

1 - Coach screws 90mm min thread engagement into joists.

2 - Bond all coach screws with SIKA Supergrip to full depth.

3 - A Rubber, EPDM or Foam Tape layer must be installed between the Clamp and Timber.

1 - All fixings must engage into the structural slab.2 - A Rubber, EPDM or Foam Tape layer must be

installed between the Clamp and Concrete.

Coach Screws M12or two for 30mm

12mm ToughenedGlass

Timber Deck - M12 Coach ScrewOccupancyResidential A & C3 only




12mm ToughenedGlass

Coach Screws M12

12mm ToughenedGlass

12mm Rod

For full installation details please refer to Infinity BA124 System Manual and Producer Statement.For protection against a fall, refer building code and / or any proprietary design document.






5.4

Infinity BA124 Typical Installation ExamplesSteel Structure - M12 BoltOccupancyA & C3 Residential 12mm GlassB, E or C3 Commercial 15mm Glass

Timber Deck - M12 Coach ScrewOccupancyB, E or C3 Commercial

Waterproof Timber DeckOccupancyB, E or C3 Commercial

1 - A Rubber, EPDM or Foam Tape layer must be installed between the Clamp and Steel.

ToughenedGlass







15mm ToughenedGlass

Coach Screws M12

15mm ToughenedGlass

Bottomof Glass

Coach Screws M12







5.5

Infinity BA122 Base Fix Glass Balustrade System


Infinity BA122 Glass Balustrade System is the ideal solution for Base fix frameless glass balustrades.No holes are required in the glass panels, they are simple to install, align and adjust.Suitable for pool fencing and the following balustrade occupancy types – Residential A and C3, Commercial B, E and C3.Standard finish is natural anodised aluminium with mill finish and standard colour powder coat options also available.To order Infinity select the required quantity and lengths of front and rear covers, plus the required number of glass clamps. All system components can be selected on page 5.6.

80

122






5.6

Infinity BA122 Base Fix Glass Balustrade System


BP-122 Base plate section to ensure alignment of clamps BP-122-N-5000 Natural AnodisedBP-122-N-2500 Natural Anodised

Per metre

BP-122-M-5000 Mill Alum FinishBP-122-M-2500 Mill Alum FinishStandard Dulux colours at the same price as Natural Anodised if 25lm or more. If less than 25lm then P.O.A.

CP-122 Cover plate – With bulb seal Cover plates required each side of clamps CP-122-N-5000 Natural AnodisedCP-122-N-2500 Natural Anodised

CP-122-M-5000 Mill Alum Finish CP-122-M-2500 Mill Alum FinishStandard Dulux colours at the same price as Natural Anodised if 25lm or more. If less than 25lm then P.O.A.

CKB-122 Clamp Kit CompleteCKB-12 to suit 12mm GlassCKB-15 to suit 15mm Glass

BPP-122 Base plate packers to align clamps if floor uneven. Pack at clamp positions BPP-122-1 1mm packer in Silver FrostBPP-122-5 5mm packer in Silver Frost

BPP-122-1-M 1mm packer in Mill Alum Finish BPP-122-5-M 5mm packer in Mill Alum Finish

ECB-122 End cap with screw fixings ECB-122-N Natural AnodisedECB-122-M Mill Alum Finish






5.7

Infinity BA122 Glass Balustrade Components

Bottom Clamp Screws

150

Access holes to HorizontalAdjustment Screw Front side deleted,

Showing M12 Bolt Hole in Base

Rear Side

Top Clamp Screws

Cover and Base Extrusion Front and Back Cover Extrusions Identical

119

25.5

74.8

Sides 2mm

Base 2mm/3mm

70

119

BASE FIX BOTTOMCHANNELEXTRUSION

BASE FIX FRONT & REAR

COVERS

BASE FIX HEAVY DUTYCLAMPEXTRUSION

Base FixHeavy Duty Clamp Extrusion

Bottom Clamp Screws

150



Rear Side

Top Clamp Screws


119

25.5

74.8

Sides 2mm

Base 2mm/3mm

70

119



COVERS



Bottom Clamp Screws

150



Rear Side

Top Clamp Screws


119

25.5

74.8

Sides 2mm

Base 2mm/3mm

70

119



COVERS



Extrusion End Plate Bottom Spacer Plates

Timber2 x 75 long x 75 wide

Attach Screws x 2 No 8 x 25 SS CS

Packers (height adjustment)- Timber - Use 2 per layer, end to end to form 150mm long x 75mm wide- Steel and Concrete, use one only 75mm sq

Steel and Concrete1 x 75 long x 75 wide.Insert then rotate 90 deg

1mm thick Plate 5mm thick Plate






5.8

Infinity BA122 Typical Installation ExamplesTypical Base Fix to Timber - M12 Coachscrew1 - A Design engineer must ensure

the structure can support the appropriate loads

2 - Coachscrews 150mm min thread engagement into joists

3 - Bond all coachscrews with SIKA Supergrip to full depth

4 - All fixings must be Stainless Steel

Typical Base Fix to Steel - M12 Bolt 1 - A Design engineer must ensure



Typical Base Fix to Concrete - M12 Stud 1 - A Design engineer must ensure


2 - An EPDM, Rubber or Foam Tape layer must be installed between the Channel and Concrete



Decking

53mm wide Lumberlok Multibrace Stainless steel strapsto Top and Bottom of Joists.

6 x 45x3.3mm annular grooved Nailsto each end of straps, Top and Bottom

Minimum Joist sizeex 200mm x 50mm

12mm or 15mm Toughened Glass

Balustrade heightabove Deck

Screw45mm Setback

Adjustment screws to inside

Minimum BoundaryJoist sizeex 200mm x 100mm

Decking

Web 6mm min




150 min110 min

EPDM layer



90 min

Concrete Slab







5.9

PosiGlaze Glass Balustrade System

*Powdercoat or Anodising P.O.AFor protection against a fall, refer building code and / or any proprietary design document.

Product Code Description Price per Metre

PG120B

PG120BM

PosiGlaze Base Fix SystemComplete with seal strips, gaskets and glass clamps.

Stock length: 3 metresMaterial: AluminiumFinish: Satin Stainless Effect

Finish: Mill. incl 2 side cladding covers

*Pricing is per metre*Supplied in 3 metre kits*Specify glass thickness when ordering*For fixings refer to page 5.12 to 5.14*For end caps refer to page 5.11

PG120S

PG120SM

PosiGlaze Face Fix SystemComplete with seal strips, gaskets, side claddingand glass clamps.


Finish: Mill

*Pricing is per metre*Supplied in 3metre kits*Specify glass thickness when ordering.*For fixings refer to page 5.12 to 5.14*For end caps refer to page 5.11

PG180S

PG180SM

PosiGlaze Face Fix SystemComplete with seal strips, gaskets, side cladding,bottom cladding and glass clamps.


Finish: Mill

*Pricing is per metre*Supplied in 3metre kits*Specify glass thickness when ordering*For fixings refer to page 5.12 to 5.14*For end caps refer to page 5.11






5.10

PosiGlaze Glass Balustrade System Components

Product Code Description Price per Metre

PGBCBase Fix ChannelSupplied in 3 metre lengths

PGSCFace Fix ChannelSupplied in 3 metre lengths

PGTS

PGTSM

Top Seal StripSupplied in 3 metre lengths

Mill Finish

PGSCL

PGSCLM

Side CladdingSupplied in 3 and 5 metre lengths

Mill Finish

PGBCL

PGBCLM

Bottom CladdingSupplied in 3 metre lengths

Mill Finish

*Powdercoat or Anodising P.O.A






5.11

PosiGlaze Glass Balustrade System Components


PGC12PGC15PGC19PGC13PGC17PGC21

Glass Clamp - to suit 12mmGlass Clamp - to suit 15mmGlass Clamp - to suit 19mmGlass Clamp - to suit 13.5mmGlass Clamp - to suit 17.5mmGlass Clamp - to suit 21.5mm(each kit contains 12 clamps)

per clamp

PGCD Channel Joinersper pair

PGECPGEC1PGECLPGECL

End Caps - Base Fix (suit PG120B)End Caps - Face Fix (suit PG120S)End Caps - Face Fix LH (suit PG180S)End Caps - Face Fix RH (suit PG180S)

per cap

PGECMPGEC1MPGECLMPGECLM

End Caps - Base Fix (suit PG120B)End Caps - Face Fix (suit PG120S)End Caps - Face Fix LH (suit PG180S)End Caps - Face Fix RH (suit PG180S)

per cap

PGSPN Spannerseach

PGBS Bulb Seal (specify glass thickness to suit) per metre

PGCG Black Fibre Clamp Kit Gasket0.8mm ThickNote: may be required for non standard thickness

each






5.12

PosiGlaze Glass Balustrade System Fixings PG120B - Base Fix


CONCRETEFIXING FORA,B,E,C3OCCUPANCY

PGMF-110Threaded Rod for Chemical AnchorM10x110mm Threaded Rod, M10/12x24x2.5Washer, M10 Nut - 316 Grade Stainless Steel

HILTI-150 HILTI HIT-HY 150 MAX Chemical Anchor

SIKA-1 Sika 1 Masonry Anchor FixFits standard cartridge gun

CONCRETEFIXING FORC1/C2,DOCCUPANCY

PGMF-35HILTI HIS-R-N M12x125 Threaded SleeveM12x35 Hex Screw, M12x24x2.5 Washer316 Grade Stainless Steel



STEEL FIXING ALL OCCUPANCY TYPES

PGSF-35M10x35mm Hex Screw (check length for application)2 off M10/12x24x2.5 Washer, M10 Nut316 Grade Stainless Steel

TIMBERFIXING FORA,B,E,C3,C1/C2,DOCCUPANCY

PGBTF-180M10x180mm Custom Lag ScrewM10/12x24x2.5 Washer, M10 Nut304 Grade Stainless SteelNOTE: Fixing required 200mm centres

PGBTF-240

M10x240mm Hex Bolt(based on 200mm deep stringers check length for application)M10/12x24x2.5 Washer, M10 Washer Ø50x3mm, M10 Nut - 316 Grade Stainless Steel






5.13

PosiGlaze Glass Balustrade System Fixings PG120S & PG180S - Face Fix


CONCRETEFIXING ALL OCCUPANCY TYPES

PGMF-110Threaded Rod for Chemical AnchorM10x110mm Threaded Rod, M10/12x24x2.5Washer, M10 Nut - 316 Grade Stainless Steel



STEEL FIXING ALL OCCUPANCY TYPES

PGSF-35M10x35mm Hex Screw (check length for application)2 off M10/12x24x2.5 Washer, M10 Nut316 Grade Stainless Steel


PGBTF-120

M10x120mm Lag ScrewM10/12x24x2.5 Washer,M10 Nut304 Grade Stainless SteelNOTE: Fixing required 200mm centres


PGBTF-130

M10x130mm Hex Bolt(based on 2x45mm stringers check length for application)M10/12x24x2.5 Washer, M10 Washer Ø50x3mm, M10 Nut - 316 Grade Stainless Steel






5.14

PosiGlaze Glass Balustrade System Fixing Components

Code Description Price

M10-R110 M10x110mm Threaded Rod316 Grade Stainless Steel

HILTI-RN-M12 HILTI HIS-R-N M12x125 Threaded Sleeve316 Grade Stainless Steel



M12-24 M10/12x24x2.5 Washer316 Grade Stainless Steel

M10-HN M10 Nut316 Grade Stainless Steel

M10-35HS M10x35mm Hex Screw316 Grade Stainless Steel

M12-35HS M12x35mm Hex Screw316 Grade Stainless Steel

M10-180SL M10x180mm Custom Lag Screw304 Grade Stainless Steel

M10-120SL M10x120mm Lag Screw304 Grade Stainless Steel

M10-FW50 M10 Washer Ø50x3mm316 Grade Stainless Steel

M10-240HB M10x240mm Hex Bolt316 Grade Stainless Steel

M10-130HB M10x130mm Hex Bolt316 Grade Stainless Steel






5.15

50mm Face Fix Disc FittingsSpecify glass thickness / Glass Hole 25mm


MB50/A/T45NZ Patent #621097

Heavyweight Anchor 316SSS 50mm diameter with square edge head Adjustable standoff 40mm to 50mmTo suit 12mm and 15mm toughened glassMB50/A/T45 in 316SSS MB50/A/T45 in 316PSS Patent Pending

MB50/S/T30 Heavyweight Anchor 316SSS 50mm diameter with square edge head 30mm standoffGlass to wall fixingTo suit 12mm and 15mm toughened glassMB50/S/T30 in 316SSS MB50/S/T30 in 316PSS

SD50x30 Heavyweight Anchor 316SSS 50mm diameter button head30mm standoffGlass to wall fixingTo suit 12mm and 15mm toughened glassSD50x30 in 316SSS SD50x30 in 316PSS

MD50/SQ Square Cover Kit to convertMB50/S/T30 and SD50x30Round Fixings to Square Sets 316SSS 316PSS

Setout Details Page 5.18Producer Statements Available on Request

MB50/S/6 Heavyweight Anchor 316SSS50mm diameter with round edge head 6mm standoff Glass to cleat fixing To suit 10, 12 and 15mm toughened glass

40 - 5040 - 50

30

NB: Fixings ordered separately, see M10 Rod and Lag Screw options on page 5.17For protection against a fall, refer building code and / or any proprietary design document.






5.16

50mm Disc ComponentsProduct Code Description Price

MB50-D 50mm Dia x 6mm CSK Disc M10 316 SSS

SD50-B 50mm Dia Stepped Disc 10mm thick head 316 SSS

MB50-T6 50mm Dia x 6mm Threaded Disc M10 316 SSS

MB50-S6 50mm Dia x 6mm Spacer with Clearance hole for M10 Rod 316 SSS

MB50-B30 50mm Dia x 30mm Body M10 316 SSS

MB50-BX 50mm Dia Special Length Body Specify X. X = length 316 SSS

FG-50 50mm Dia x .8mm Black Fibre Gasket

NB-20 19.5mm Dia Nylon Bush to suit M10 & M12 Rod

50

30

50






5.17

Balustrade Fixings for 50mm Disc FittingsProduct Code Description Price

M10 Fixings for 50mm Dia Standoff Fittings

M10-R50M10-R100M10-R115M10-R140

Stainless Steel Rods M10 x 50mm M10 x 100mm M10 x 115mm M10 x 140mm

M10-100SLM10-120SL

Stainless Steel Lag Screw M10 x 100mm M10 x 120mm

M10-70ZLLM10-100ZLM10-120ZL

Zinc Plated Lag Screwfor Internal Applications M10 x 70mm M10 x 100mmM10 x 120mm

M10-HN

M10-DN

M10 Hex Nut SS

M10 Dome Nut SS

M10-30

M10-5HR

M10 x 30mm dia washers 2.5mm SS M10 Spring Washer SS

M10-SQ 50 x 50 x 3 Flat Square Washer SS

FG-50 50mm dia .8mm Black Fibre Gasket For internal or external applications

LG-50 50mm dia .8mm L.D.P.E. Gasket (opaque) For internal applications






5.18

Please note: Request specific drawings to comply with NZS1170 standard for balustrades

Domestic & Commercial concrete installation with M10-R115 stainless steel rod fixing

Domestic & Commercial steel installation with M10-R50 rod, washer & nut in stainless steel

Commercial timber installation with M10-R140 rod, washer & nut in stainless steel

50mm Disc Fix Balustrade Setout Details







5.19

75mm Face Fix Single Disc FittingsSpecify glass thickness

Steel fix

Timber fix

Producer statements available on request.


MB75/T/T30 Heavyweight Single Disc 75mm diameter disc Fitting suitable for single line Fixings at 400mmm max centres 30mm Standoff

Suitable for 12mm and 15mm toughened glass Specify glass thickness NB: Fixings ordered separately See M12 Rod Fixings on page 5.21 Glass hole 25mm

MB 75-SQ Square Cover Kit to convert MB75/T/T30 to square fitting 316SSS 316PSS

Concrete fix







5.20

100mm Face Fix Single Disc Fittings

Concrete Installation Steel Installation Timber Installation


MB100/S/T30 Heavy Weight Fixing Disc Suitable for Single Line Fixings Glass thickness 12mm or 15mm Compliant to NZS1170 for use in domestic and commercial installations Glass hole 25mm

NB: MB100 are made to order

NB: Fixings ordered separately See M12 Rod Fixings on page 5.21







5.21

Balustrade Fixings 75mm and 100mm Disc Fittings


M12-R60M12-R120M12-R150

Stainless Steel Rods M12 x 60mm SS M12 x 120mm SS M12 x 150mm SS

M12-HN

M12-DN

M12 Hex Nut SS

M12 Dome Nut SS

M12-SW M12 Spring Washer SS

M12-SQ M12 50 x 50 x 3 Flat Square Washer SS Used with rod and nut When fixing 75mm or 100mm discs to timber

FG-75 75mm dia x .8mm Black Gasket suitable for internal & external applications

LG-75 75mm dia x .8mm L.D.P.E. Gasket (opaque) For internal applications

FG-100 100mm dia x .8mm Black Gasket suitable for internal & external applications

LG-100 100mm dia x .8mm L.D.P.E. Gasket (opaque) For internal applications

TS75-1-2 Tapered shim for MB75 fixing. Black nylon material.

TS75-1-3 Tapered shim for MB75 fixing. Black nylon material.

2

1

3

1

ø75

ø75






5.22


PF150 Plate Fix Fitting. Compliant to AS/NZ1170 for use in both domestic and commercial balustrades and pool fences.

PF-150 Plate Fix Fitting Single or Double point fixing 316SSS Finish20mm stand off

CBW-120 Wood fix M10 x 120mm CSK Socket screw, 50mm diameter Washer & Hex Nut - 316SSS (double point fix X 2 fixing)

CBW-130 Wood fix M12 x 130mm CSK Socket screw, 50mm diameter Washer & Hex Nut - 316SSS (Single point fix X 1 fixing)

MF110 Hilti 10mm Masonry Sleeve (Double point fix X 2 fixings)

MF125 Hilti 12mm Masonry Sleeve (Single point fix X 1 fixing)

SF50-10 Metal Fix 10 x 50mm CSK Socket screw, flat washer & Hex Nut 316SSS (Double point fix X 2 fixings)

SF50-12 Metal Fix 12 x 50mm CSK Socket screw, flat washer & Hex Nut 316SSS (Single point fix X 1 fixing)

PF150 Face Fix Plate Fittings

Producer Statements Available on RequestFor protection against a fall, refer building code and / or any proprietary design document.






5.23

PF150 Plate Fitting Commercial & Domestic Installation

Typical PF150 fixing details to comply with AS/NZS1170.Full details & Producer Statements available on request.

Glass hole 25mm.

Commercial glass thickness 15mm

Timber Single Point fixWood fix CBW - 130

Steel Single Point fixMetal fix SF50 - 12

Concrete Single Point fixHilti 12mm MF125

Timber Double Point fixWood fix CSW - 120

Steel Double Point fixMetal fix SF50 - 10

Concrete Double Point fixHilti 10mm MF110

Domestic glass thickness 12mm

100

20







5.24

Panel Clamps - Connector Rail - HandrailProduct Code Description Price

BC25-180 Balustrade panel clamp 180°Will help align & stiffen12mm Balustrade PanelsNo holes required316SSS

BC25-90 Balustrade panel clamp 90°Will help align & stiffen12mm Balustrade PanelsExternal screws. No holes required316SSS

BA-50 Handrail Section 50mm diaStock length 5800mm silver frost P/CCut length silver frost P/CStock length in standard P/C colours5800mm

BA-50C Balustrade End Cap in PC

70

25

75

25

50






5.25

Glass ClampsProduct Code Description Price

SS101

CAPM6-25T

Satin Stainless Steel Glass Clamp Adjustable to suit glass thickness From 6mm to 10mm No Glass preparation required 30kg per clamp loading 316 Stainless steel

M6 x 25 Cap Screw for SS101

RS102.50RS102.70

Radius back plate to allow mounting of SS101 clamps to 50mm or 70mm diameter posts.

SS200 Satin Stainless Steel Glass Clamp No glass preparation required 35kg per clamp loading 316 stainless steel Specify glass thickness to be clamped 8mm, 10mm, 12mm

SS201 Satin Stainless Steel Glass Clamp No glass preparation required Radius back to suit 50mm diameter post 35kg per clamp loading 316 stainless steel Specify glass thickness to be clamped 8mm, 10mm, 12mm

SP202 Security pin can be fitted into SS200 x SS201 clamps

Cap - 37w Wood fix cap screw 14G x 37mm SS Wood fix cap screw 14G x 50mm SS

Cap - 25T Metal thread cap screw M8 x 25mm






5.26

Strut Post SP155 Base FixProduct Code Description Price

Strut Post SP155 Base FixFor Occupancy A, B, C3, E and pool fences.To be used with 12mm toughened or 13.5mm toughened laminated glassNo holes or cut outs required in glass

SP155T

Strut Post Base Fix2 point fixing to substrate2205 duplex gradeSatin Stainless SteelFor 12mm toughened glass

SP155L

Strut Post Base Fix2 point fixing to substrate2205 duplex gradeSatin Stainless SteelFor 13.5mm toughened laminated glass

MF-115Masonry Fix M10 x 115mmThreaded Rod, Flat Washer and NutStainless Steel

SF-40Steel Fix M10 x 40mmHex Bolt, Flat Washer and NutStainless Steel

WF-180Pool Fence onlyWood Fix M10 x 180mmStainless Steel Coach Screw & HDFlat Washer

Producer Statements Available on RequestFor protection against a fall, refer building code and / or any proprietary design document.






5.27

Strut Post PL400 Face FixProduct Code Description Price

PL400 Strut Post Face FixDomestic and Residential Occupancy A and A other (C3)Compliant to AS/NZS1170 for use in residential balustrades and pool fences. Adjustable for glass alignment. Concealed fixings. To be used with 12mm toughened glass. Available in Standard Silver Frost Finish. Special colours on request. Powder coated Aluminium.

PL400 Post in Silver Frost P/C

PL400-1 Selected P/C Colour 1-5 units

PL400-6 Selected P/C Colour 6 plus units

MF-130 Masonry FixingM10 x 130 Rod with Nut & Washer

WF-160 Timber FixingM10 x 160 Coach Screw & Washer SS

SF-30Steel FixingCounter Sunk Machine ScrewFor tapping into steel. M10 x 30 SS

Please note: Custom colours can be selected from the Standard Dulux Duralloy range.Please contact us to ensure colour requested is available.

PS1 Available on request.







5.28

Strut Post PL200 Base FixProduct Code Description Price

PL200 Strut Post Base FixDomestic and Residential Occupancy A and A other (C3)Compliant to AS/NZS1170 for use in residential balustrades and pool fences. Adjustable for glass alignment. Concealed fixings. To be used with 12mm toughened glass. Available in Standard Silver Frost Finish. Special colours on request. Powder coated Aluminium.

PL200 Post in Silver Frost Finish P/C

PL200-1 Selected P/C Colour 1-5 units

PL200-6 Selected P/C Colour 6 plus units

CSM-120Masonry FixingCSK Sleeve Anchor for masonry fixingM10 x 120mm SS

CSW-120 Timber FixingM10 x 120 CSK coach screw SS

CSW-100 Timber Fixing for Pool Fence onlyM10 x 100 CSK coach screw SS

SF-30Steel FixingCSK machine screw for threading into steel structure M10 x 30 SS

Please note: Custom colours can be selected from the Standard Dulux Duralloy range.Please contact us to ensure colour requested is available.

PS1 Available on request.







5.29

Laguna High Strength Pool Gate HingeProduct Code Description Price Per Single Hinge

Pool gate hydraulic hinges with adjustable closing speed and adjustable closed position

316SSS

316PSS

LH-180 NHOGlass to Glass Non Hold Open

Suits 10mm & 12mm Glass

Max gate width 1000mmNote: When hinging gates off glass side panels ensure panels are at least one and a half times the width of the gate or the side panel is fixed back to solid structure.When ordering specify SSS or PSS finish.

LH-90 NHOWall to Glass Non Hold OpenCentered back plate. 60mm wide.Suits 10mm & 12mm Glass

Max gate width 1000mm

LH-90L NHOWall to Glass Non Hold OpenOffset back plate. 60mm wide.Suits 10mm & 12mm Glass


HH 90HH 90-L

HH 180

For Glass cut out and hinge detail see page 5.32

HH 90HH 90-L

HH 180

159

77110

110

77

77

60

HH 90HH 90-L

HH 180

110

77

60






5.30

Laguna Hydraulic Gate Hinges : Cut Out & installation details

These self closing hydraulic gate hinges are designed to close gates up to 1000mm wide in external and in internal installations. They are designed to be used with the range of MFG Mag Latches for pool gates. Hinges are Non Hold Open. The hinges are available in both glass to glass and glass to post/wall models and both models are Non Handed, meaning they can be hung on either side of the gate opening.Gaskets are provided so the glass gate and side panels can be 10mm or 12mm toughened glass.1. Remove clip on covers and install the hinges. Ensure all clearances are correct.2. If gate requires alignment, loosen allen keys on both hinges by 360° as per detail B. Set the door to

correct alignment and retighten allen screws.3. To set closing speed, close slotted screws on both hinges then open both 1/4 of a turn. Then open or

close slotted valves to obtain required closing speed. Take care to ensure the valves of each hinge are synchronized so they close at equal speed.

4. Install clip on covers.

Door alignment1. Remove covers (E)2. Loosen allen screws by 360° (D)3. Adjust to required angle and retighten allen screws (D)4. (C) is slotted speed valve.

Glass to Glass Cut OutWall to Glass Cut Out

3° (max.)

3° (max.)

A

B

83 83 83

60

R4x 2 R4x 2R4x 2

60 60

78 78 78

49 49 497

7

o 22X2 o 22X2 o 22X2

83 83 83

60

R4x 2 R4x 2R4x 2

60 60

78 78 78

49 49 497

7

o 22X2 o 22X2 o 22X2






5.31

Malibu Hydraulic Pool Gate HingesProduct Code Description Price Per Single Hinge

Pool gate hydraulic hinges with adjustable closing speed and adjustable closed position

316SSS

316PSS

HH-180 NHOGlass to Glass Non Hold Open

Suits 10mm & 12mm Glass


HH-90 NHOWall to Glass Non Hold OpenCentered back plate. 60mm wide. Suits 10mm & 12mm Glass


HH-90L NHOWall to Glass Non Hold OpenOffset back plate. 60mm wide.Suits 10mm & 12mm Glass


HH-90

HH 90-L

For Glass cut out and hinge detail see page 5.34

HH-180

HH 90HH 90-L

HH 180

125

60104

60

HH 90HH 90-L

HH 180

104

60

60

HH 90HH 90-L

HH 180

104

60

60






5.32

Malibu Hydraulic Gate Hinges : Cut Out & installation details

These self closing hydraulic gate hinges are designed to close gates up to 900mm wide in external and in internal installations. They are designed to be used with the range of MFG Mag Latches for pool gates. Hinges are Non Hold Open. The hinges are available in both glass to glass and glass to post /wall models and both models are Non Handed, meaning they can be hung on either side of the gate opening.Gaskets are provided so the glass gate and side panels can be 10mm or 12mm toughened glass.1. Remove clip on covers and install the hinges. Ensure all clearances are correct.2. If door requires alignment, loosen allen keys on both hinges by 360° as per detail B. Set the door to

correct alignment and retighten allen screws.3. To set closing speed, close slotted screws on both hinges then open both 1/4 of a turn. Then open or

close slotted valves to obtain required closing speed. Take care to ensure the valves of each hinge are synchronized so they close at equal speed.

4. Install clip on covers.

Door alignment1. Remove covers (E)2. Loosen allen screws by 360° (D)3. Adjust to required angle and retighten allen screws (D)4. (C) is slotted speed valve.

Glass to Glass Cut OutWall to Glass Cut Out

10° (max.)

10° (max.)

AUSTVISION

MFGMALIBU HYDRAULIC DOOR HINGES

CUT OUTAND INSTALL DETAILS--

1:1

01AUSTVISION

MFGMALIBU HYDRAULIC DOOR HINGES

CUT OUTAND INSTALL DETAILS--

1:1

01

A

B






5.33

Product Code DescriptionS/Steel Satin or Polished

PGL Glass to Glass Latch Black polymer lock body with stainless steel mounting plates Magnetic bolt lock

PGL-P Glass to Post Latch Black polymer lock body with aluminium or stainless steel mounting plates Magnetic bolt lock. Includes stop to prevent gate swinging (MP28) into pool area

PGL-PF Glass to Post or Wall Latch Face Fix Black polymer lock body with aluminium or stainless steel mounting plates Will fit square post or wall

PGL-PR Glass to Round Post Black polymer lock body with aluminium or stainless steel mounting plates Will mount to 50mm dia round post

PGL-90 90º Glass to Glass Latch Face Fix Black polymer lock body with aluminium or stainless steel mounting plates

Pool Gate Latches

50

Glass preparation see page 5.37






5.34

Malibu Pool Gate Latches

Glass preparation see page 5.38


These latches are designed to match both the Malibu and Laguna series pool gate hinges.

316 SSS &

316 PSS

MGL-SSS Glass to Glass Pool Gate LatchSuits 10mm & 12mm glassFinish 316 SSS

MGL-PSS Glass to Glass Pool Gate LatchSuits10mm & 12mm glassFinish 316 PSS

MGL-P-SSS Glass to Post or Wall Gate LatchSuits 10mm & 12mm glassFinish 316 SSS

MGL-P-PSS Glass to Post or Wall Gate LatchSuits 10mm & 12mm glassFinish 316 PSS






5.35

Pool Gate Latch Glass Preparation

PGL PGL-P PGL-PF/ PGL-PR

PGL90 PGA-2

44

38

ø20






5.36

Malibu Pool Gate Latch Glass Preparation

MGL - Glass to Glass MGL-P - Wall or Post to Glass






5.37

Product Code Description S/Steel Polished

PGA-1 Pool Gate Patch to Patch Pivot Arm Used with two MP20 patch fittings for glass to glass

PGH-2 Pool Gate Glass to Patch Pivot Arm Arm clamps directly to glass side panel and MP20 on gate

PWA Pool Gate Wall Mount Pivot Arm Used with one MP20 patch fitting for glass to wall

2300 Sealing Compound To protect Floor Spring from water damage. Two pack mix.

Sika-215 25kg Bag Sika-215 Grout Each

Pool Gate Components






5.38

Ozone Pool Gate Components for 12mm GlassProduct Code Description SSS

FH100NHO-316SSS

Ozone hydraulic self closing, bottom patch, non hold open. 316 SSS for external gate installations.

PGH-2Pool Gate top pivot arm 180°. Arm clamps directly to glass side panel and MP20 patch fitting on the gate. 2205 SSS

PGH-4Pool Gate top Pivot arm.Wall mount arm which fits to MP20 patch on the Glass Gate. 2205 SSS

PGH-5Pool Gate Pivot arm.Post mount arm which fits to MP20 patch on the glass gate. 2205 SSS

PGH-6Pool Gate Pivot arm.Arm clamps directly to glass side panel and MP20 patch on the glass gate. Gate is at 90° to side panel. 2205 SSS

PGH-7 Pool Gate Latch 180°Glass to Glass in Line. 2205 SSS

PGH-8Pool Gate Latch 90°Glass to Glass. Gate at 90° to side panel.2205 SSS

PGH-11 Pool Gate Latch 180°Glass Gate to post in line. 2205 SSS

MP20 Top Patch Fitting. SSS

FH-5 5mm base plate packer for Ozone patch. Increase clearance to 17mm.

FH-10 10mm base plate packer for Ozone patch. Increase clearance to 22mm.

Setout details page 5.41 to 5.43

Latch

Gate

Latch Gate

MacworxFH100 NHO

PGH - 2

PGH - 4

PGH - 5

PGH - 6

PGH - 7

PGH - 8

PGH - 11

MP20

Latch

Gate

Latch Gate

MacworxFH100 NHO

PGH - 2

PGH - 4

PGH - 5

PGH - 6

PGH - 7

PGH - 8

PGH - 11

MP20

Latch

Gate

Latch Gate

MacworxFH100 NHO

PGH - 2

PGH - 4

PGH - 5

PGH - 6

PGH - 7

PGH - 8

PGH - 11

MP20

Latch

Gate

Latch Gate

MacworxFH100 NHO

PGH - 2

PGH - 4

PGH - 5

PGH - 6

PGH - 7

PGH - 8

PGH - 11

MP20

Latch

Gate

Latch Gate

MacworxFH100 NHO

PGH - 2

PGH - 4

PGH - 5

PGH - 6

PGH - 7

PGH - 8

PGH - 11

MP20

Latch

Gate

Latch Gate

MacworxFH100 NHO

PGH - 2

PGH - 4

PGH - 5

PGH - 6

PGH - 7

PGH - 8

PGH - 11

MP20

Latch

Gate

Latch Gate

MacworxFH100 NHO

PGH - 2

PGH - 4

PGH - 5

PGH - 6

PGH - 7

PGH - 8

PGH - 11

MP20

Latch

Gate

Latch Gate

MacworxFH100 NHO

PGH - 2

PGH - 4

PGH - 5

PGH - 6

PGH - 7

PGH - 8

PGH - 11

MP20

Latch

Gate

Latch Gate

MacworxFH100 NHO

PGH - 2

PGH - 4

PGH - 5

PGH - 6

PGH - 7

PGH - 8

PGH - 11

MP20






5.39

Ozone Pool Hardware Glass Cut Out Details

60 36

Ø18

20

60

Ozone FH100 NHO

PGH - 2 Top pivot arm 180° PGH - 6 Top pivot arm 90°

PGH - 7 Glass to glass 180° latch

SidePanel

SidePanel

PGH - 8 Glass to glass 90° latch

MP20 Top Patch

180

1725056

R12

36

68148

161

R80R55

Ø20

37

5836

Ø18

90°

Plan View

6

10

42 42

4747

279 279

2 x Ø142 x Ø14

30 42

4747

279 279

2 x Ø142 x Ø14

90°

60 36

Ø18

20

60

Ozone FH100 NHO


PGH - 7 Glass to glass 180° latch PGH - 8 Glass to glass 90° latch

MP20 Top Patch

180

1725056

R12

36

68148

161

R80R55

Ø20

37

5836

Ø18

90°

Plan View

6

42 42

4747

279 279

2 x Ø182 x Ø18

30 42

4747

279 279

2 x Ø182 x Ø18

90°

60 36

Ø18

20

60

Ozone FH100 NHO



MP20 Top Patch

180

1725056

R12

36

68148

161

R80R55

Ø20

37

5836

Ø18

90°

Plan View

6

42 42

4747

279 279

2 x Ø182 x Ø18

30 42

4747

279 279

2 x Ø182 x Ø18

90°

60 36

Ø18

20

60

Ozone FH100 NHO



MP20 Top Patch

180

1725056

R12

36

68148

161

R80R55

Ø20

37

5836

Ø18

90°

Plan View

6

42 42

4747

279 279

2 x Ø182 x Ø18

30 42

4747

279 279

2 x Ø182 x Ø18

90°

60 36

Ø18

20

60

Ozone FH100 NHO



MP20 Top Patch

180

1725056

R12

36

68148

161

R80R55

Ø20

37

5836

Ø18

90°

Plan View

6

42 42

4747

279 279

2 x Ø182 x Ø18

30 42

4747

279 279

2 x Ø182 x Ø18

90°

60 36

Ø18

20

60

Ozone FH100 NHO



MP20 Top Patch

180

1725056

R12

36

68148

161

R80R55

Ø20

37

5836

Ø18

90°

Plan View

6

42 42

4747

279 279

2 x Ø182 x Ø18

30 42

4747

279 279

2 x Ø182 x Ø18

90°

60 36

Ø18

20

60

Ozone FH100 NHO



MP20 Top Patch

180

1725056

R12

36

68148

161

R80R55

Ø20

37

5836

Ø18

90°

Plan View

6

42 42

4747

279 279

2 x Ø182 x Ø18

30 42

4747

279 279

2 x Ø182 x Ø18

90°

60 36

Ø18

20

60

Ozone FH100 NHO



MP20 Top Patch

180

1725056

R12

36

68148

161

R80R55

Ø20

37

5836

Ø18

90°

Plan View

6

42 42

4747

279 279

2 x Ø182 x Ø18

30 42

4747

279 279

2 x Ø182 x Ø18

90°

PGH - 11 Glass Gate in inline post






5.40

PGH-2

PGH-7

FH10012

MP20

66

F.F.L.

PGH-4

PGH-7

FH10012

MP20

6 15

F.F.L.

Glass to Glass Gate

Wall to Glass Gate






5.41

Post to Post Gate

PGH-6 90°

MP20

PSH-7

FH100

12

20

20

6

PGH-6 90°

MP20

PSH-7

FH100

12

20

20

6

PGH-5

PGH-11

FH10012

MP20

10 20

F.F.L.

Glass to Glass Gate 90°






5.42

Pool Gate Latch and Pivot Applications






5.43

Link Rail S25 Railing System for 10mm or 12mm GlassProduct Code Description Price

S25LR 25mm x 21mmLinkRail 2205 SSSStock length 5800mmFixing Details on Page 5.46

per 5800mmstock length

S25WB Wall Bracket 2205 SSSTo suit S25 LR Link Rail

S25AJ Adjustable Joiner 2205 SSSTo suit S25 LR Link Rail

S25AHJ Adjustable Horizontal JoinerTo suit S25 LR Link Rail 2205 SSS

S2590C Fixed 90° Corner Connector2205 SSSTo suit S25 LR Link Rail

S25IJ Inline Joiner 2205 SSSTo suit S25 LR Link Rail

S25EC End Cap 2205 SSSTo suit S25 LR Link Rail

TL2680 Smart Rail Tube Loc 268050ml bottle

PS1 available on request






5.44

Link Rail S25 Rail to Glass Fixing Detail10mm Toughened Glass Fixing Detail

12mm Toughened GlassFixing Detail

S25 Link Rail 2205 Grade S/S

High Density Foam Tape Single Sided 3.2mm thick

SiliconeHigh Bond Tape Double Sided

1mm Thick

High Bond Tape Double Sided

1mm Thick

S25 Link Rail 2205 Grade S/S

High Density Foam Tape Single Sided 3.2mm thick

Silicone






5.45

Link Rail S40 Railing System for 12mm to 21.5mm GlassProduct Code Description Price

S40LR 40mm x 30mmLinkRail 2205 SSSStock length 5800mmFixing Details on Page 5.48

per 5800mmstock length

S40WB Wall Bracket 2205 SSSTo suit S40 LR Link Rail

S40AJ Adjustable Verticle Joiner 2205 SSSTo suit S40 LR Link Rail

S40AHJ Adjustable Horizontal JoinerTo suit S40 LR Link Rail 2205 SSS

S4090C Fixed 90° Corner Connector2205 SSSTo suit S40 LR Link Rail

S40IJ Inline Joiner 2205 SSSTo suit S40 LR Link Rail

S40EC End Cap 2205 SSSTo suit S40 LR Link Rail

TL2680 Smart Rail Tube Loc 268050ml bottle

S40R12-13.5 Rubber to suit 12mm to 13.5mm glass

S40R13-16 Rubber to suit 13mm to 16mm glass

S40R16-19 Rubber to suit 16mm to 19mm glass

PS1 available on request






5.46

Link Rail S40 Rail to Glass Fixing DetailOption ADouble Silicone Seal

Option BTape Silicone Seal

AUSTVISION

BALUSTRADE RAILING SYSTEMSCATALOGUE DRAWING

LINK RAIL - S40FOR 12 - 21.5mm glass

--

1:1

01

S31803 GRADE S/S

S31803 GRADE S/S S31803 GRADE S/S

1.5m

mM

IN

1.5m

mM

IN

INTERLINKING HANDRAIL - S40

Project : Interlinking Handrail DesignJob no. : 160038ST11/S/1Drawing title : Interlinking Handrail - S40Sheet no. : SK02-Rev ADate : 12 May 2016

Notes:-Interlinking handrails must be continuous over a minimum of 3 glass balustrade panels.-Interlinking handrail connections to join handrail sections together or to other structure are to be by specific engineering design on a case by case basis.-Interlinking handrails are applicable for Occupancy loading Type A – Domestic and residential and Type C3 – Areas without obstacles for moving people as per NZS1170.1:2002 only.

AUSTVISION

BALUSTRADE RAILING SYSTEMSCATALOGUE DRAWING

LINK RAIL - S40FOR 12 - 21.5mm glass

--

1:1

01

S31803 GRADE S/S

S31803 GRADE S/S S31803 GRADE S/S

1.5m

mM

IN

1.5m

mM

IN

INTERLINKING HANDRAIL - S40

Project : Interlinking Handrail DesignJob no. : 160038ST11/S/1Drawing title : Interlinking Handrail - S40Sheet no. : SK02-Rev ADate : 12 May 2016

Notes:-Interlinking handrails must be continuous over a minimum of 3 glass balustrade panels.-Interlinking handrail connections to join handrail sections together or to other structure are to be by specific engineering design on a case by case basis.-Interlinking handrails are applicable for Occupancy loading Type A – Domestic and residential and Type C3 – Areas without obstacles for moving people as per NZS1170.1:2002 only.






Edgetec 220 Link Rail for 12mm and 15mm Toughened Glass

5.48A


Aluminium Link Rail 38x30

ET220N5.8 Stock length 5800mm. Natural Anodised to 20 microns.

ET220N2.9 Stock length 2900mm. Natural Anodised to 20 microns.

ET2205.8 Stock length 5800mm. Silver Frost.

ET2205.9 Stock length 2900mm. Silver Frost.

ET220M5.8 Stock length 5800mm. Mill Finish.

ET220M2.9 Stock length 2900mm. Mill Finish.

ETG12/2.9Link Rail gasket to suit 12mm glassStock length 2900mm. Refer installation details.

ETG15/2.9Link Rail gasket to suit 15mm glassStock length 2900mm. Refer installation details.

ET180180° Straight joiner. 80 x 22.8 x 5mm. Mill aluminium.For mitred inline butt joints.

ET9090° Corner joiner.50 x 50 x 5mm. Mill aluminium.For mitred butt joints.

ETECN ETEC ETECM

End cap.Nat anodised Silver Frost Mill Aluminium

Producer statements available on request. Custom colours can be selected from the standard Dulux Duralloy range. P.O.A.






Edgetec 220 Link Rail Components

5.48B


Two piece 90º corner Link Connector

ET45P Silver Frost P.C. finish.

ET45M Mill Aluminium finish.

Two piece adjustable corner Link Connector 180º to 90º



Two piece adjustable Stairway Link Connector



Note: Refer page 5.48D for installation details.

M6 x 25 C/S SS machine screw







5.48C

Edgetec 220 Link Rail ComponentsProduct Code Description Price

Wall Mount End Plate Left Hand. Satin Stainless Steel.

ETWMPL Silver Frost P.C. finish.

ETWMML Mill Stainless finish.

Wall Mount End Plate Left Hand.Satin Stainless Steel.

ETWMPR Silver Frost finish.

ETWMMR Mill Stainless finish.

Solid Post End Mount. Satin Stainless Steel.

ETPMP Silver Frost finish.

ETPMM Mill Stainless finish.

Post End Mount for MFG 65mm Aluminium Post Series Stainless Steel.

ETAPP Silver Frost finish.

ETAPM Mill Stainless finish.

2000mm Max panel width

Image is Left hand






Edgetec 220 Link Rail Components & Installation

5.48D


Fixed angle = 90deg

Glass cornerGap = 19mm min

19mm

Max angle = 90deg(One way only)

19mm

Glass cornerGap = 19mm min

M6 x 25 C/SSS machine screw


Max down = 35deg

Gap 30mm min40mm recommended

Toughened Glass

Interlinking Top RailET220

6G ConnectionInterlinking Top RailGasket

Shaped Packer, as required. Predrilled

35 min intostud

Interlinking Top RailEnd Bracket

Product Code Description

ET45 Two piece 90º Corner.

ET46 Two piece adjustable corner suits any angle between 180º to 90º.

ET47 Two piece adjustable Stairway. Max 35º.

Timber Fixing of Wall Mount Plate. Note min. 35 embedment into solid structure.

All connection in the ET220 Link Rail must be screw fixed with 6G & 1/4” self tapping square stainless pan head screws.

All holes in the continuous gasket must be filled with silicone before fitting ET220 Link Rail. Allow 24 hours for full silicone bond.

Connecting bracket, joiner or corner.

6G x 1/4” screwed into position through a 4mm dia. hole.

Silicone.

Continuous Link Rail Gasket.

Glass Panel.






5.51

Balustrade Handrail BracketProduct Description SSS

HB50/R/90°-12 HB50/R/90°-15 Handrail Bracket Round arm section Suitable for timber or stainless steel handrails. 316SSS Available as solid wall Fixing 3 x CSK screws mountingHB50/R/90-W

HB50/S/90°-12 HB50/S/90°-15 Handrail Bracket Square section arm Suitable for timber or stainless steel handrails. 316SSS Available as solid wall Fixing 3 x CSK screws mounting HB50/S/90-W

HB50/S/CK 50mm square cover kit to convert HB50 discs to square 316SSS

12 or 15mm glass

12 or 15mm glass

5.49






5.52

Merchant Price List

Balustrade Handrail Bracket - Heavy DutyProduct Description SSS

HB50/R/90°/HD12HB50/R/90°/HD15 Handrail Bracket Suitable for stainless steel handrails. 316SSS

12 or 15mm glassOptions to suit other glass thicknessesPOA

5.49A






5.53

Modular Handrail SystemProduct Code Description Price

MHB-A Handrail Bracket – Adjustable Height316 Satin Stainless SteelTo suit 50.8mm diameter, 1.5mm wall, satin 316 stainless steel tubeGlass thickness 12-25mmGlass Hole size 20mm

MHB-90 90° Flush Joiner316 Satin Stainless SteelTo suit 50.8mm diameter, 1.5mm wall, satin 316 stainless steel tube

MHB-90A Adjustable Flush Joiner 316 Satin Stainless SteelTo suit 50.8mm diameter, 1.5mm wall, satin 316 stainless steel tube

MHB-180 Flush Inline Joiner 316 Satin Stainless SteelTo suit 50.8mm diameter, 1.5mm wall, satin 316 stainless steel tube

MHB-WB Wall bracket316 satin stainless steelThree, 9mm diameter wall-mounting holes.To suit 50.8mm diameter, 1.5mm wall, satin 316 stainless steel tube

MHB-EC Tube end cap316 Satin Stainless SteelTo suit 50.8mm diameter, 1.5mm wall, satin 316 stainless steel tube

MFG does not stock the 50.8mm diameter, 1.5mm wall, satin 316 stainless steel tube. This is available from stainless tube suppliers, e.g. Stainless Products or Steel and Tube.

5.50





5.25A

Balustrade Stiffener BracketsProduct Code Description Price

SBW-15 Suit glass from 12 - 15.5mm.Stiffener bracket - No holes required.90° glass to wall.65mm x 55mm x 25mm. Duplex 2205. Stainless Steel Satin finish.

SB90-15 Suit glass from 12 - 15.5mm.Stiffener bracket - No holes required.90° glass to glass.82mm x 55mm x 25mm. Duplex 2205. Stainless Steel Satin finish.

SB180-15 Suit glass from 12 - 15.5mm.Stiffener bracket - No holes required.180° glass to glass.103mm overall x 25mm. Duplex 2205. Stainless Steel Satin finish.

SBW-21 Suit glass from 17.52 - 21.52mm.Stiffener bracket - No holes required.90° glass to wall.65mm x 55mm x 25mm. Duplex 2205. Stainless Steel Satin finish.

SB90-21 Suit glass from 17.52 - 21.52mm.Stiffener bracket - No holes required.90° glass to glass.88mm x 55mm x 25mm. Duplex 2205. Stainless Steel Satin finish.

SB180-21 Suit glass from 17.52 - 21.52mm.Stiffener bracket - No holes required.180° glass to glass.103mm overall x 25mm. Duplex 2205. Stainless Steel Satin finish.

All brackets are supplied with a selection of gaskets to suit glass thickness and includes stainless steel clamping plates.


SECTION 5: FRAMELESS BALUSTRADE SYSTEMS INDEX · Duplex 2205. Stainless Steel Satin finish....

Documents

Transcript of SECTION 5: FRAMELESS BALUSTRADE SYSTEMS INDEX · Duplex 2205. Stainless Steel Satin finish....