SECTION 05 Cable Railing Mounting Options and Mounting
Transcript of SECTION 05 Cable Railing Mounting Options and Mounting
SECTION 05720
Cable Railing Mounting Options andMounting Hardware Catalog
June 1, 2003
Wagner Companies • 800.786.2111 • 414.214.0444 • FAX: 414.214.0450 • www.rbwagner.com
2/1/03
TABLE OF CONTENTSPage
Mounting Options
(Note: D1 through D6 refer to reference notes in Ultra-tec® Product Design & Fabrication Guide)
D1 Floor Plates for 3" x 1" Rectangular Tube Posts M-1Facia Mounting Plates for 3" x 1" Rectangular Tube Posts M-2Concrete Embedding for 3" x 1" Rectangular Tube Posts M-3
D2 Floor Plates for 2" x 1" Rectangular Tube Posts M-4Facia Mounting Plates for 2" x 1" Rectangular Tube Posts M-5Concrete Embedding for 2" x 1" Rectangular Tube Posts M-6
D3 Floor Plates for 2" x 2" Square Tube Posts M-7Facia Mounting Plates for 2" x 2" Square Tube Posts M-7Concrete Embedding for 2" x 2" Square Tube Posts M-8
D4 Floor Plates for 1-1/4" Pipe Posts M-9Facia Mounting Plates for 1-1/4" Pipe Posts M-10Concrete Embedding for 1-1/4" Pipe Posts M-10
D5 Floor Plates for 1-1/2" Pipe Posts M-11Facia Mounting Plates for 1-1/2" Pipe Posts M-12Concrete Embedding for 1-1/2" Pipe Posts M-12
D6 Floor Plates for 2" Pipe Posts M-13Facia Mounting Plates for 2" Pipe Posts M-14Concrete Embedding for 2" Pipe Posts M-14
D7 Additional Steel Facia Mounting/Fabrication Specifications M-15
D8 Additional Wood Facia Mounting/Fabrication Specifications M-15
Stringer/Wall Mount Pads
For 1-1/4" and 1-1/2" Pipe M-16For 2" Pipe M-17For Rectangular and Square Tube M-17
Wagner Companies • 800.786.2111 • 414.214.0444 • FAX: 414.214.0450 • www.rbwagner.com
6/1/03
MOUNTING OPTIONSNote: D1 through D6 refer to reference notes in Ultra-tec ® Product Design & Fabrication Guide
D1—Mounting Options for 3" x 1" Rectangular Tube Posts
End Post Floor Plate, Countersunk Screw Holes—Order Part No. FLP-8M (1018 C.R.S) FLP-8MS (304 S.S.)
Intermediate Post Floor Plate, Countersunk Screw Holes—Order Part No. FLP-7M (1018 C.R.S) or FLP-7MS (304 S.S.)
M-1
Wagner Companies • 800.786.2111 • 414.214.0444 • FAX: 414.214.0450 • www.rbwagner.com
6/1/03
MOUNTING OPTIONS (continued)Note: D1 through D6 refer to reference notes in Ultra-tec ® Product Design & Fabrication Guide
M-2
D1—Mounting Options for 3" x 1" Rectangular Tube Posts (continued)
End Post Facia Mounting Plate—Order Part No. FAP-3 (1018 C.R.S.) or FAP-3S (304 S.S.)
Intermediate Post Facia Mounting Plate—Order Part No. FAP-1 (1018 C.R.S) or Part No. FAP-1S (304 S.S.)
For additional facia mounting/fabrication specifications, see notes D-7 and D-8.
Wagner Companies • 800.786.2111 • 414.214.0444 • FAX: 414.214.0450 • www.rbwagner.com
6/1/03M-3
MOUNTING OPTIONS (continued)Note: D1 through D6 refer to reference notes in Ultra-tec ® Product Design & Fabrication Guide
D1—Mounting Options for 3" x 1" Rectangular Tube Posts (continued)
Concrete Embedding—End Post
Concrete Embedding—Intermediate Post
Wagner Companies • 800.786.2111 • 414.214.0444 • FAX: 414.214.0450 • www.rbwagner.com
2/1/03
D2-Mounting Options for 2" x 1" Rectangular Tube Posts
End Post Floor Plate, Countersunk Screw Holes—Order Part No. FLP-6M (1018 C.R.S) or FLP-6MS (304 S.S.)
Intermediate Post Floor Plate, Countersunk Screw Holes—Order Part No. FLP-4M (1018 C.R.S.) or FLP-4MS (304 S.S.)
M-4
MOUNTING OPTIONS (continued)Note: D1 through D6 refer to reference notes in Ultra-tec ® Product Design & Fabrication Guide
Wagner Companies • 800.786.2111 • 414.214.0444 • FAX: 414.214.0450 • www.rbwagner.com
2/1/03M-5
MOUNTING OPTIONS (continued)Note: D1 through D6 refer to reference notes in Ultra-tec ® Product Design & Fabrication Guide
D2—Mounting Options for 2" x 1" Rectangular Tube Posts (continued)
End Post Facia Mounting Plate—Order Part No. FAP-3 (1018 C.R.S.) or FAP-3S (304 S.S.)
Intermediate Post Facia Mounting Plate—Order Part No. FAP-1 (1018 C.R.S.) or Part No. FAP-1S (304 S.S.)
For additional facia mounting/fabrication specifications, see notes D-7 and D-8.
Wagner Companies • 800.786.2111 • 414.214.0444 • FAX: 414.214.0450 • www.rbwagner.com
2/1/03M-6
MOUNTING OPTIONS (continued)Note: D1 through D6 refer to reference notes in Ultra-tec ® Product Design & Fabrication Guide
D2—Mounting Options for 2" x 1" Rectangular Tube Posts (continued)
Concrete Embedding—End Post
Concrete Embedding—Intermediate Post
Wagner Companies • 800.786.2111 • 414.214.0444 • FAX: 414.214.0450 • www.rbwagner.com
2/1/03M-7
MOUNTING OPTIONS (continued)Note: D1 through D6 refer to reference notes in Ultra-tec ® Product Design & Fabrication Guide
D3—Mounting Options for 2" x 2" Square Tube Posts
End or Intermediate Post Floor Plate, Countersunk Screw Holes—Order Part No. FLP-5M (1018 C.R.S.) or FLP-5MS (304 S.S.)
End or Intermediate Post Facia Mounting Plate—Order Part No. FAP-2 (1018 C.R.S.) or FAP-2S (304 S.S.)
For additional facia mounting/fabrication specifications, see notes D-7 and D-8.
Wagner Companies • 800.786.2111 • 414.214.0444 • FAX: 414.214.0450 • www.rbwagner.com
2/1/03M-8
MOUNTING OPTIONS (continued)Note: D1 through D6 refer to reference notes in Ultra-tec ® Product Design & Fabrication Guide
D3—Mounting Options for 2" x 2" Square Tube Posts
Concrete embedding
Wagner Companies • 800.786.2111 • 414.214.0444 • FAX: 414.214.0450 • www.rbwagner.com
2/1/03M-9
MOUNTING OPTIONS (continued)Note: D1 through D6 refer to reference notes in Ultra-tec ® Product Design & Fabrication Guide
D4—Mounting Options for 1-1/4" Pipe Posts
Floor Plate—Order Part No. FLP-1 (1018 C.R.S.) or FLP-1S (304 S.S.)
Floor Plate, Countersunk Screw Holes—Order Part No. FLP-1M (1018 C.R.S.) or FLP-1MS (304 S.S.)
Wagner Companies • 800.786.2111 • 414.214.0444 • FAX: 414.214.0450 • www.rbwagner.com
2/1/03M-10
MOUNTING OPTIONS (continued)Note: D1 through D6 refer to reference notes in Ultra-tec ® Product Design & Fabrication Guide
D4—Mounting Options for 1-1/4" Pipe Posts (continued)
Facia Mounting Plate—Order Part No. FAP-4 (1018 C.R.S.) or FAP-4S (304 S.S.)
For additional facia mounting/fabrication specifications, see notes D-7 and D-8.
Concrete embedding
Wagner Companies • 800.786.2111 • 414.214.0444 • FAX: 414.214.0450 • www.rbwagner.com
2/1/03M-11
MOUNTING OPTIONS (continued)Note: D1 through D6 refer to reference notes in Ultra-tec ® Product Design & Fabrication Guide
D5—Mounting Options for 1-1/2" Pipe Posts
Floor Plate—Order Part No. FLP-2 (1018 C.R.S.) or FLP-2S (304 S.S.)
Floor Plate, Countersunk Screw Holes—Order Part No. FLP-2M (1018 C.R.S.) or FLP-2MS (304 S.S.)
Wagner Companies • 800.786.2111 • 414.214.0444 • FAX: 414.214.0450 • www.rbwagner.com
2/1/03M-12
MOUNTING OPTIONS (continued)Note: D1 through D6 refer to reference notes in Ultra-tec ® Product Design & Fabrication Guide
D5—Mounting Options for 1-1/2" Pipe Posts
Facia Mounting Plate—Order Part No. FAP-4 (1018 C.R.S.) or FAP-4S (304 S.S.)
For additional facia mounting/fabrication specifications, see notes D-7 and D-8.
Concrete embedding
Wagner Companies • 800.786.2111 • 414.214.0444 • FAX: 414.214.0450 • www.rbwagner.com
2/1/03M-13
MOUNTING OPTIONS (continued)Note: D1 through D6 refer to reference notes in Ultra-tec ® Product Design & Fabrication Guide
D6—Mounting Options for 2" Pipe Posts
Floor Plate—Order Part No. FLP-3 (1018 C.R.S.) or FLP-3S (304 S.S.)
Floor Plate, Countersunk Screw Holes—Order Part No. FLP-3M (1018 C.R.S.) or FLP-3MS (304 S.S.)
Wagner Companies • 800.786.2111 • 414.214.0444 • FAX: 414.214.0450 • www.rbwagner.com
2/1/03M-14
MOUNTING OPTIONS (continued)Note: D1 through D6 refer to reference notes in Ultra-tec ® Product Design & Fabrication Guide
D6—Mounting Options for 2" Pipe Posts (continued)
Facia Mounting PlateOrder Part No. FAP-5 (1018 C.R.S.) or FAP-5S (304 S.S.)
For additional facia mounting/fabrication specifications, see notes D-7 and D-8.
Concrete Embedding
Wagner Companies • 800.786.2111 • 414.214.0444 • FAX: 414.214.0450 • www.rbwagner.com
2/1/03M-15
MOUNTING OPTIONS (continued)
D7—Additional Facia Mount Steel Mounting/Fabrication Specifications
D8—Additional Facia Mount Wood Mounting/Fabrication Specifications
Wagner Companies • 800.786.2111 • 414.214.0444 • FAX: 414.214.0450 • www.rbwagner.com
2/1/03M-16
STRINGER/WALL MOUNT PADS
Our wall mount pads are for welding under the toprail and providing a hole for a fastener that goes throughthe pad and into the wall. We also use these pads for
mounting posts onto the top of stringers, especially incases where a wooden stringer is the base mountingsurface.
Stringer/Wall Mount pad—1-1/4" Pipe—Order Part No. SP-1 (1018 C.R.S.) or SP-1S (304 S.S.)
Stringer/Wall Mount pad—1-1/2" Pipe—Order Part No. SP-2 (1018 C.R.S.) or SP-2S (304 S.S.)
Wagner Companies • 800.786.2111 • 414.214.0444 • FAX: 414.214.0450 • www.rbwagner.com
2/1/03M-17
Stringer/Wall Mount Pad—2" Pipe—Order Part No. SP-3 (1018 C.R.S.) or SP-3S (304 S.S.)
Stringer/Wall Mount Pad—2" x 2" & 2" x 1" Tube—Order Part No. SP-4 (1018 C.R.S.) or SP-4S (304 S.S.)
Wagner Companies • 800.786.2111 • 414.214.0444 • FAX: 414.214.0450 • www.rbwagner.com