SEC-IX SCHEDULE OF RATES UJJAIN...

SCHEDULE OF RATES FOR THE WORK OF BALANCE CIVIL, ELECTRICAL AND EXTERNAL DEVELOPMENTAL

WORKS OF SHIPRA VIHAR TOWNSHIP AT UJJAIN, MADHYA PRADESH

THE RATES QUOTED SHALL BE INCLUSIVE OF MATERIAL AND LABOUR AND ALL TAXES AND DUTIES

THE BIDDER HAS TO QUOTE HIS RATES EXCLUDING SERVICE TAX WHICH SHALL BE PAID SEPERATELY

AT THE CURRENT RATE OF 4.944% ON RAISING OF CENVATABLE INVOICE AND ANY STATUTARY

CHANGE IN RATE OF SERVICE TAX SHALL BE PAID/ DEDUCTED AS PER CLAUSE 19.0 OF SPECIAL

CONDITIONS OF THE CONTRACT-SCC

THE BIDDER IS REQUIRED TO FIRST DOWNLOAD THE EXCEL PRICE SCHEDULE SHEET AND FILL THE RATES ONLY

AND THEN UPLOAD THE FILLED RATES EXCEL SHEET IN THE PRICE PART OF E-TENDER

E-TENDER NO: GAIL/KCS/C&P/15/01/8000006438/CIVIL DATED:-08.04.2014

Sl. NO. DESCRIPTION UNIT QTYUNIT RATE

(Rs.)TOTAL (Rs.)

PART -A

INTERNAL CIVIL AND INTERIOR WORKS OF HOUSES AND GUEST HOUSE AND HOSTEL

1

Providing and fixing and erecting of bidders own or hired MS pipe /balli

scaffolding at all heights up to 25 mtr height all around buildings and in

lift well etc for executing balance works of external plaster, fixing of

water, sewerage and rainwater pipe, lift work, external

painting,miscelleneous repairs etc for a period of approximately 6

months and after completion of work removing the scaffolding and

taking it back. the bidder may bring his own/hired scaffolding and after

completion of his work shall dismantle and take away his scaffolding

M2 5000 0.00

2

18 mm cement plaster in two coats, under layer 12 mm thick cement

plaster 1:5 finished with a top layer cement plaster 1:6 including mixing

of water proofing compound on balance areas of external faces of

buildings and in patches etc at many places including cost of hacking

of wall/RCC at places ,curing,cleaning of floor, disposal of disposable

material outside premises etc complete, The cost of scaffolding shall

be paid for seperately as per item no 1

M2 2000 0.00

3

12/15 mm cement plaster 1:6 inside buildings and houses on walls etc

and also in in patches including cutting patch in proper shape, raking of

joints etc complete including cost of hacking of wall and ceiling,

scaffolding, curing,cleaning of floor, disposal of malba outside

premises etc complete

M2 1000 0.00

4

miscelleneous brick work in patches, repair, filling of holes less than

0.5 sqm in plan with M35 bricks and 1:6 cement mortar for walls of 115

mm thick including cost of hacking of wall for bonding, scaffolding,

curing,cleaning of floor, disposal of malba outside premises etc

complete

M2 100 0.00

5

removing existing damaged floor or wall tile and mortar and cleaning

and preparing the surface for fixing of new tile and cartege of

disposable material and disposal of same outside premises for all

leads. The cost of fixing of new tile shall be paid seperately

M2 50 0.00

6

Providing and laying vitrified floor tiles in floor and skirting of different

sizes up to 600 x 600 mm of approved make of Kajaria, Johnson,

Orient, Bell, regency ceramics, somany make in all colors and shade

laid on 20mm bed of cement mortar 1:4 including grouting of joints with

white cement and matching pigment etc complete

M2 1700 0.00

7

Providing and fixing ist quality glazed ceramic wall tiles of approved

make of Kajaria, Johnson, Orient Bell, regency ceramics, somany

make in all colors up to size 300 x 300 mm over 12mm bed of cement

mortar 1:3 and jointing with grey cement slurry including pointing with

white cement mixed with pigment of matching shade etc complete

M2 525 0.00

8

Providing and fixing prepolished Granite in flooring and staircase riser

and steps15-18 mm thick in all colors over 12mm bed of cement

mortar 1:3 and jointing with grey cement slurry including pointing with

white cement mixed with pigment of matching shade etc complete

including cutting for openings, rounding of corners and edges , buffing

and polishing complete.

M2 150 0.00

GAIL/CIVIL/KHERA/2013-14 1












(Rs.)TOTAL (Rs.)

9

Providing and laying of 20 mm thick Pre Polished Granite Cherry

red colour in dado and lift facade laid over base cement mortar 20

mm thick 1:4 (1 cement : 4 coarse sand) including necessary cutting

and chipping of RCC/brick work and grouting with rich cement

mortar/slurry or premixed mortar available in market on the back

between the granite and wall and grouting of joints with cement mixed

with matching color pigment complete all as per drawing and

specification including cutting hole for boxes etc, half rounding of

corners and edges, buffing and polishing complete.

M2 100 0.00

10

Providing and laying of 20 mm thick Pre Polished Granite Counter

Cherry red colour for Kitchen platforms and floors and staircase

risers and steps etc and like of approved shade laid over base cement

mortar 20 mm thick 1:4 (1 cement : 4 coarse sand) including

necessary cutting and chipping of RCC slab grouting with rich cement

mortar/slurry on the back between the granite and wall and grouting of

joints with cement mixed with matching color pigment complete all as

per drawing and specification including cutting hole for pipe, cutting for

sink, vertical stile of counter, SS L shaped hooks for support, rounding

of corners and edges, buffing and polishing complete .

M2 100 0.00

11

painting internal wall with premium acrylic smooth plastic emulsion

paint of approved make- Asian, ICI Dulex, berger, Nerolac to give

an even shade over the surface on walls and ceiling , two or more

coats on new work including cost of primer, putty, scaffolding etc

complete

M2 18000 0.00

12

finishing wall with premium acrylic smooth exterior paint of approved

brand, Asian- Apex Ultima brand or ICI Dulex- Weathershied max

brand on new work - two or more coats over including priming coat of

exterior primer of same brand up to 25 mtr height, pipe scaffolding

shall be paid seperately as per item no 1

M2 15000 0.00

13

finishing internal walls with plaster of paris(POP) finish to make the

wall even and smooth for application of painting, of Gyproc/ India

Gysum/Shriram brand including hacking of wall and ceiling,

scaffolding, curing, applying POP on wall and ceilings and cornice all

along the corner junctions of wall and ceiling and cleaning of floor etc

complete

M2 15000 0.00

14

painting with synthetic enamel paint of approved brand and

manufacture - Asian, ICI Dulex, berger, Nerolac of required color and

shade including a priming coat for wood and/or steel- two or more

coats on new work including preparation of surface etc completeM2 500 0.00

15

Providing and fixing stainless steel raling in staircase and balconies

and parapet( Grade 304) made of hollow tubes, channel, pipe, plate

etc including welding, grinding, buffing, polishing, and making

curvature and fitting the same with necessary stainless steel nuts and

bolts complete including fixing the railing with necassary accessories

and stainless steel dash fasteners, stainless steel bolts etc of required

size, on top of floor or side of waist slab or top of parapet

KG 1500 0.00













(Rs.)TOTAL (Rs.)

16

Providing and fixing 30 mm thick ISI marked flush door shutters non

decorative type, core of block board construction with frame of 1st

class hard wood and well matched commercial 3 ply veneering and

finished with approved 1.0 mm thick decorative laminate on both face

of shutter including stainless steel butt hinges and screws.The cost

shall include providing and fixing of 25 mm thick hard wood lipping on

all edges of flush door shutters, approved make of flush door -

kitply/greenply/duro/century and approved make of laminate-

greenlam/merino/kitlam

M2 400 0.00

17

Providing and fixing 30 mm thick wire gauge shutters using stainless

steel wire gauge with wire of dia 0.5 mm and avaerage aperture of 1.4

mm both ways for doors, windows and clerestory windows including

stainless steel hinge, screws, wooden beading etc complete-

seasoned and chemically treated II class teak/sheesham wood

including preparing surface, rubbing, filling , primer and two or more

coats of french spirit polish

M2 700 0.00

18

Providing and fixing 30 mm thick glazed shutters using 4 mm thick

float glass panes for doors, windows and clerestory windows including

stainless steel hinge, screws, woden beading etc complete- Kiln

seasoned and chemically treated II class teak/sheesham wood

including preparing surface, rubbing, filling , primer and two or more

coats of french spirit polish

M2 400 0.00

19

Fixing available flush door and window shutters including stainless

steel hinges, screws etc complete including a coat of wood primer and

two or more coats of synthetic enamel paint EA 200 0.00

20

providing and fixing 1.5 mm thick ISI brand laminate on top of existing

flush door, panelling etc complete approved make-

greenlam/merino/kitlamM2 200 0.00

21

providing wood work in frames of doors and windows,fixed in position

with holdfast etc- kiln seasoned and chemically treated hard wood M3 2 0.00

22

Providing and fixing Curtain rods of 1.25 mm thick chromiumplated

brass plate with two chromium plated brass brackets fixed with CP

brass screws and wooden plugs etc wherever necassary complete-

25mm dia rod

M 600 0.00

23

Providing and fixing the following Anodised Aluminium fittings AC-10

grade transparent or dyed to required color or shade with nuts and

screws complete, approved make- Everite, EBCO, ECIE,Hardwyn

a sliding door bolt 300 x 16 mm/250x16mm EA 300 0.00

b tower bolt 200x10mm EA 600 0.00

c tower bolt 100x10mm EA 2500 0.00

d handle with back plate 125 mm EA 300 0.00

e handle with back plate 100 mm EA 300 0.00

f handle with back plate 75 mm EA 2500 0.00

g hangingfloor door stopper twin rubber EA 500 0.00

h rubber round stopper for door 50mm long EA 150 0.00

i casement stay EA 1500 0.00













(Rs.)TOTAL (Rs.)

24

Providing and fixing Godrej make 100 mm bright finished mortice key

less latch and a pair of lever handles, in color of approved quality

including necassary screws etc complete product code 9155, BAAN

code LKYLDMKL1

EA 200 0.00

25

Providing and fixing Godrej make premium night latch of pin cyclinder

technology at the main entrance door of all houses and hostel and

guest house, in color of approved quality including necassary screws

etc complete product code 3779, BAAN code LKYPDN004/5

EA 50 0.00

26

Providing and fixing Godrej make 100 mm 6 lever bright finished

mortice lock and a pair of lever handles,- Diana/Stella handle set in

color of approved quality including necassary screws etc complete

product code 8170/8171, 9155, BAAN code LKYLDMD07/08EA 10 0.00

27

Providing and fixing Godrej make combipack lock with 24 cm Euro

mortice lock 2C with SEC 01 satin/gold/antique brass handle set of

approved quality including necassary screws etc complete product

code 7524/7525,8170/8171, BAAN code LKYPDMS1A/GEA 4 0.00

28

Providing and fixing box type almirahs in bedroom and drawing room

as per the detailed drawing attached- 19mm commercial board for

box, shelf and backing and 25 mm commercial board shutters with 1.5

mm thick decorative laminate on top including all material, labour, SS

piano hinge, SS sliding hinge for cupboard and SS handles, magnetic

catcher, cupboard lock, screws, hard wood lipping on edges and for

fixing of frames of shutter etc, and painting inside surface with two or

more coats of synthetic enamel paint . the outer face of the almirah

shall have 1.5 mm decorative laminate on top. all board and laminate

should be ISI brand , approved make of board- Duro, Century,

Kitply, greenply and of laminate- Greenlam/merino/kitlam. Piano

hinge and sliding hinge shall be of hettich/earl bihari make- Area

measured in plan shall be taken for payment

M2 300 0.00

29

Providing and fixing box type cupboard in Kitchen, below and above

counter as per the tentattive drawing enclosed attached 19mm board

for box, shelf and backing and 25 mm board shutters with 1.5 mm thick

decorative laminate on top including all material, labour, SS piano

hinge, SS sliding hinge for cupboard and SS handles, magnetic

catcher, cupboard lock, screws, and painting inside surface with two or

more coats of synthetic enamel paint . the outer face of the almirah

shall have 1.5 mm decorative laminate on top.all board and laminate

should be ISI brand approved make of board- Duro, Century, Kitply,

and of laminate- Greenlam. Piano hinge and sliding hinge shall be

of hettich/earl bihari make- Area measured in plan shall be taken

for payment

M2 160 0.00

30

providing and fixing SS modular basket, jaali, trays etc inside the

kitchen cupboard counter including all fittings and fixtures as per site

conditions and design as approved by GAIL. The contractor shall get

the design prepared for the kitchen cabinets as per site location and

get the same approved from GAIL

KG 800 0.00













(Rs.)TOTAL (Rs.)

31

Supply and Installation of testing & Commissioning of 8 Person

Carrying capacity suitable to lift up to G+5 level building with all

necessary equipment, motor, gear box and supporting railing in side

the lift running area. complete with Stainless steel(polished or buff

finish) wall and ceiling and door, approved design tile flooring, SS

handrail,as required and installed in flush with wall including all fixing

materials as required. It should meet all technical specification

requirement and test reports as detailed in the technical specifications

of lift enclosed alongwith the tender. Approved make are- Kone, Otis,

Johnson

EA 1 0.00

32

Supply and Installation of testing & Commissioning of 8 Person

Carrying capacity suitable to lift up to G+3 level building with all

necessary equipment, motor, gear box and supporting railing in side

the lift running area. complete with Stainless steel(polished or buff

finish) wall and ceiling and door, approved design tile flooring, SS

handrail,as required and installed in flush with wall including all fixing

materials as required. It should meet all technical specification

requirement and test reports as detailed in the technical specifications

of lift enclosed alongwith the tender Approved make are- Kone, Otis,

Johnson

EA 1 0.00

33

Providing and fixing 60 mm thick glazed Paver tile of M-30 grade over

20 mm of cement mortar bed of 1:6 including filling of joints with

cement mortar and pigment etc completeM2 1000 0.00

34

Providing and fixing non abrasive/ non slippery heavy duty rubber

moulded fully vitrified parking tiles of Kajaria/Johnson/Eurocon/real

granito or equivalent make as approved by EIC with cement mortar

1:4 and grouting of joints with cement slurry mixed with matching

compound

M2 900 0.00













(Rs.)TOTAL (Rs.)

35

Providing and laying integral cement based waterproofing treatment(

Brick Koba) in sunken floor and toilets, lift pit, roof terrace, khurras,

including preparation of surface as required consisting of following

operations:-a) applying a slurry coat of neat cement using 2.75 kg/m2

of cement admixed with water proofing compound over RCC slab and

adjoining walls up to 300 mm height b) laying brick bats with mortar

using brick bats 25 mm to 115 mm size with 50% of cement mortat

1:5( 1 cement and 5 coarse sand) admixed with water proofing

compound over 20mm thick layer of cement mortar 1:5( 1 cement 5

coarse sand) admixed with water proofing compound to required

slope and treating similarly the adjoining wall up to 300 mm height

including rounding of edges and junctions of wall and slab c) after two

days of proper curing applying a second coat of cement slurry using

2.75 kg/m2 of cement admixed with water proofing compound d)

finishing the surface with 20 mm thick jointless cement mortar of mix

1:4( 1 cement 4 coarse sand) admixed with waterproofing compound

and finishing the surface with trwel and with neat cement slurry and

making a pattern of 300 x 300 mm square 3mm deep e) the whole

terrace so finished shall be flooded with water for a minimum period

of two weeks for curing and for final test.- with average thickness of

120 mm and minimum thickness at khurra as 65 mm

M2 500 0.00

36

Providing and placing on terrace at all floor levels Polyethylene water

storage tank ISI 12701 marked, of different capacities ranging from

1000 ltr to 3000 ltr, with cover and suitable locking arrangment and

making necessary holes for inlet, outlet and overflow pipes but without

fittings and base support for tank, approved make- Sintex

LITRE 28000 0.00

37

Supply and installation of frameless toughened glass structural vertical

glazing, fixed and openable including necessary SS clamps and

fittings, nuts, bolts, hydraulic door closer for door , SS handle, lock etc

complete. The contractor shall get the structural design and detailed

drawing prepared from any approved vendor and get the approval of

EIC/GAIL

M2 40 0.00

38

Providing and fixing CPVC pipes including CPVC plain and brass

threaded fittings in internal and external work including cutting chases

in walls, fixing of clamps, refillingthe chase, trenching, refilling, making

brick support on terrace and testing of joints etc complete approved

make- prince, supreme, a 15 mm NB M 50 0.00

b 20 mm NB M 50 0.00

c 25mm NB M 50 0.00

d 32mm NB M 200 0.00

e 40mm NB M 200 0.00

f 50mm NB M 100 0.00













(Rs.)TOTAL (Rs.)

39Supply and fixing of Gun metal gate Valve with CI wheel of approved

quality.

a a) 25mm dia (Screwed ends) EA 2 0.00

b b) 32mm dia (Screwed ends) EA 15 0.00

c c) 40mm dia (Screwed ends) EA 15 0.00

d d) 50mm dia (Flanged ends) EA 2 0.00

40Supply, Installation & Commissioning of Brass float valve with copper

ball etc in building overhead tanks (ISI marked)

a a). 40/50mm dia EA 15 0.00

41

Providing and fixing GI pipes including GI fittings and clamps in internal

and external work, for internal work- including cutting chases in walls,

fixing of clamps, refilling the chase etc complete including disposal of

disposable material, for external works- trenching and refilling shall be

paid seperately, however for terrace works the brick support shall be

included in the rates. the rate shall include testing of joints, painting

bitumanistic paint over pipes etc complete- Jindal, Tata, Kalinga,

indian tube company, steel tube, Zenith tube, Bharat steel,

Khandelwal tube, Prakash tube make

a 15 mm NB M 10 0.00

b 20 mm NB M 10 0.00

c 25mm NB M 10 0.00

d 32mm NB M 10 0.00

e 40mm NB M 100 0.00

f 50mm NB M 100 0.00

g 65mm NB M 50 0.00

42

Providing, fixing, testing and commissioning of class II(4 kg/cm2) PVC

(IS:13592) TYPE-A with latest amendment soil waste and vent pipes

jointed with solvent cement inclusive of all necessary specials like

bends, tees, offsets, junctions, pan connector, cowls etc., laid under

floor/under ceiling/on walls with suitable clamps including making

bores in masonry / RCC slabs etc., and rendering the bores in cement

mortar after laying the pipes and specials curing etc., complete.

approved make- Prince, Supreme,

a a) 110mm SWR PVC M 100 0.00

b b) 75mm SWR PVC M 100 0.00

43 Supplying and fixing of PVC cowl

a a) 75mm dia. EA 50 0.00

b b) 100mm dia. EA 50 0.00

44Providing and fixing in position best quality salt glazed stoneware gully

trap of size 300mm square with 100mm outlet confirming to IS:651

construct as per technical specification & drawing

EA 30 0.00

45

Providing core cutting of required diameter by using core cutting

machine for taking out the soil , waste ,rain water pipe and balcony

drain pipe line in RCC slab/beam etc,. At all heights and depths and

water proofing the surfaces after the installation & testing the pipes,

floor traps etc,. complete.

a a) 75 mm OD EA 10 0.00

b b) 110 mm OD EA 10 0.00













(Rs.)TOTAL (Rs.)

46

Providing MS angle iron brackets using 40 x 40 x 6mm thick for

supporting soil and waste pipes on walls/ceiling by using hanger rods

welded/ grouted and the bracket shall be given two coats of anti

corrosive paint over a coat primer etc., complete as per drawing or as

per site requirements.

KG 100 0.00

SUPPLY OF MANPOWER AND MATERIAL FOR MISCELEENEOUS

REPAIR ETC- The following item for supply of manpower and material

have been included for miscelleneous repair etc in the buildings. Since

the work is of balance works in the buildings which are already there at

site, and therefore each house/building may require miscelleneous

repairs in the form of cleaning, malba removal, plaster, repair,

plumbing-piping repair/modification/ carpentry work for repair of

existing door/window/chowkhat , electrical work for repair of exisiting

piping or rectification of existing wiring etc and so on. for all such works

manpower deployed for repairs etc shall be jointly measured and paid

in actual by GAIL

47

supply of skilled manpower for miscelleneous repair, plaster, B/W,

tiling etc,- mason/ welder/ carpenter/painter/ plumber/

electrician/glazier/blacksmith/fitter, for repair works for eight hours on

daily basis with tools and tackles

EA 400 0.00

48supply of unskilled labour for eight hours on daily basis with tools and

tackles EA 400 0.00

49supply of cement bags per 50 kg bag

EA 100 0.00

50supply of local M-35 bricks at site

EA 5000 0.00

51 supply and spreading/stacking of narmada sand at site M3 50 0.00

52 supply and spreading/stacking of local coarse sand at site M3 50 0.00

53 supply of 6-12 mm coarse aggregate at site M3 5 0.00

54

getting approval and completion certificate from Ujjain municapal

corporation including liasoning, submission of as built drawings,

inspection and clearance etc complete. Statutary fees to be paid if any

shall be reimbursed by GAIL on submission of demand note and

challan in proof of submission of fees. Bidder may please note that the

sanctioned plan of the ujjain municipal corporation is available with

GAIL. The scope of contractor shall be to get the completion certificate

from corporation. Lump sum rate is to be quoted for one complete

activity unit/job

EA 1 0.00

PART-B

INTERNAL PLUMBING AND SEWERAGE AND SANITARY FIXTURES

55

Providing and fixing white vitreous china pedestal type water closet

(European type W.C. pan) with seat and lid, 10 litre low level white

P.V.C. flushing cistern with manually controlled device (handle lever),

conforming to IS : 7231, with all fittings and fixtures complete including

cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked black solid plastic seat and lid, Hindware,

Parryware, Jagaur make

EA 96 0.00













(Rs.)TOTAL (Rs.)

56

Providing and fixing C.P. brass angle valve with wall flange of

approved quality conforming to IS:8931-15 mm nominal bore, Jagaur

CAT no- CON-059KN- continental seriesEA 350 0.00

57Providing and fixing set of two 450-600 mm long CP braided pipe with

15mm nut and rubber washer complete for connection of geysers,

Jagaur CAT No- ALD-805B

EA 144 0.00

58

Providing and fixing best quality 15mm CP brass Two way Bib Cock(

Jagaur CAT No-CON- 041KN Continental series) with wall flange

and health faucet( Jagaur CAT No-ALD 573) with 8mm dia, 1 meter

long CP Brass flexible tube and wall Hook.

EA 60 0.00

59

Providing and fixing wash basin with C.I. brackets,of standard pattern,

including painting of fittings and brackets,

cutting and making good the walls wherever required and PVC waste

pipe-semi rigid type 32 mm dia of Hindware, parryware, Jagaur

make :

a). White Vitreous China Wash basin size 630x450 mm

EA 102 0.00

60

Providing and fixing C.P. brass Mixer for hot and cold water for

washbasin of approved quality complete with a set of two 450mm long

braided hoses

15 mm nominal bore Jagaur CAT no-CON-167KNB continental

series

EA 102 0.00

61

providing and fixing white vitreous china flat back half stall urinal with

white PVC automatic flusing cistern with fittings, CP brass flush pipe,

spreaders with union and clamps all CP brass, with waste fitings, trap

with outlet grating and other couplings including painting of fittings,

cutting and making good the walls and floor wherever required- Range

of two half stall urinals with 5 litre PVC automatic flusing cistern

Hindware, parryware, Jagaur make :

EA 1 0.00

62

Providing and fixing C.P. brass shower rose 100 mm round shaped

single flow ABS body chrome plated with gray face plate and rubit

cleaning system, Jagaur CAT No- OHS-1989, with 15/ 20 mm CP

brass shower arm, casted 190 mm long, flat shape for wall mounted

shower with flange, Jagaur CAT No-- SHA 483

EA 96 0.00

63

Providing and fixing CP brass wall mixer with provision for overhead

shower with 115 mm long bend pipe on upper side, connecting legs

and wall flanges Jagaur CAT No- CON-273KNUPR continental

series

EA 96 0.00

64

Providing and fixing C.P. brass long body sink cock with raised J

shaped swinging spout( wall mounted model)of approved quality For

Kitchen, Jagaur CAT No- CON-357 KN continental seriesEA 100 0.00













(Rs.)TOTAL (Rs.)

65

Supply and fixing of electric storage type vertical/horizontal water

heater(geyser) of approved make and colour having an inner tank

manufactured from 99% pure copper which is suitable for both hard

and soft water with all other internal fittings, internal insulation, inside

non-return valve at inlet pipe all as per IS-2082 with three core heavy

duty copper cable with 3 pin plug, CP brass screwd inlet pipe,

automatic pressure relief valve, adjustable thermostat assembly 1 No.

15mm CP brass concealed stop cock with wall flange for cold water

supply and 2 No.s 600mm long CP copper inlet connecting pipe with

end nuts for hot and cold water supply connections etc., complete with

mounting frame and bolts. including cutting and making good the walls

, wherever required, make- Venus, Racold, Bajaj, Jagaur Make

65A a) 15 L (In all Bath rooms ) EA 45 0.00

65B b) Instant geyser 5litre capacity EA 40 0.00

66

Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per

IS 13983 with C.I. brackets and stainless steel plug 40 mm including

painting of fittings and brackets, cutting and making good the walls

wherever required including PVC waste pipe 32/40 mm dia semi rigid

type :

a). Kitchen sink without drain board, 610x510/610x460mm bowl depth

200 mm. of Neelkamal and/or Nirali make

EA 42 0.00

67

Providing and fixing C.P towel ring with a minimum distances of

37mm from wall face with concealed fittings arrangement of approved

quality and colours etc, complete, Jagaur CAT No ACN-1121N

continental series

EA 96 0.00

68

Providing and fixing C.P towel rail complete with brackets fixed to

wooden cleats with CP brass screws with concealed fitting

arrangement of approved quality and colour etc, complete

a).600mm long towel rail. Jagaur CAT No CAN-1111NM continental

series

EA 80 0.00

69

Providing and fixing C.P towel rack complete with brackets fixed to

wooden cleats with CP brass screws with concealed fitting

arrangement of approved quality and colour etc, complete

a).600mm long towel rack without lower hangers but with three hooks.

Jagaur CAT No ACN-1181FHN continental series

EA 15 0.00

70Providing and fixing CP brass double robe hook and fixed by using

CP brass counter sunk screws etc., complete.

Jagaur CAT no CAN-1161N continental series

EA 400 0.00

71

Providing and fixing 600x450 mm bevelled edge mirror of superior

glass (of approved quality) complete with 6 mm thick hard board

ground fixed to wooden cleats with SS bolt and cover nut screws and

washers complete. (At each wash basin) Modi, Asahi, Saint Gobain

make

EA 96 0.00

72Providing and fixing CP brass glass shelf 600mm long with frosted

glass below mirror Jagaur CAT No- CAN-CAN-1171N continental

series

EA 100 0.00

73Providing and fixing C.P. brass short body bib cock with wall flange of

approved quality conforming to IS standards, Jagaur CAT No- CON-

047KN

EA 140 0.00

74Providing and fixing C.P. brass long body bib cock with wall flange of

approved quality conforming to IS standards, Jagaur CAT No- CON-

107KN

EA 15 0.00













(Rs.)TOTAL (Rs.)

75Providing and fixing CP brass pillar cock long neck with aerator Jagaur

CAT No- 021KNEA 15 0.00

76Providing and fixing 32 mm waste coupling with half/full thread 80/130

mm long as per site condition, Jagaur CAT No- ALD709/709L EA 150 0.00

77Supply and fixing Cockroach free floor trap, SS grating 125mm dia with

rim including setting in floor with Silicon Sealent. (chilly make) for

kicthen only

EA 150 0.00

PART-C

INTERNAL ELECTRICAL WORKS

78

12 Way TPN DB Single/Double Door with following features:-

Shall confirm to IS 13032/ IS 8263

Phase Neutral terminal block for termination of incoming cable of size

4 core 10 Sq mm AL cable.

Colored Flame retardant polyamide terminal blocks of required current

carrying capacities and FRLS wiring for R, Y, B and Neutral (Minimum

6 six nos per phase).

DB shall have detachable cassette for safe removal of RCCB /

MCBfrom DB without loosening the internal cable connection of Phase

and neutral circuit.

DBs shall be provided with integral loose wire box in TPN for

accommodating extra bunch of wire.

The protection class of DB shall not be less than IP 42.

The DB shall be supplied complete (Pre-wired with MCBs and RCCB)

with one incomer MCB TPN (63 A) RCCB (30 mA), 8 Nos – 25 A SP

MCBs and 10 Nos – 10 A SP MCBs as outgoing circuits. The outgoing

circuits shall be equally distributed in all three phases.

Acceptable Make of DB/SP-MCB/RCCB/ – Havells Cat No

DHDMTHMLXW12

EA 42 0.00

79

8 Way SPN DB Single/Double Door with following features:-

Shall confirm to IS 13032/ IS 8263

Shall be suitable for termination of incoming cable of size 3 core 6 Sq

mm AL cable.

Shall have raised neutral links for easy wiring.

Shall have spring loaded outer cover.

Shall have masking sheet to protect components from dust and

ingress of foreign materials.

Shall have neutral and earth links and top & bottom detachable plates.

The protection class of DB shall not be less than IP 42.

The DB shall be supplied complete (Pre-wired with MCBs and RCBO)

with one incomer RCBO DP (32 A, 30 mA), 3 Nos – 16 A SP MCBs

and 4 Nos – 10 A SP MCBs as outgoing circuits.

Acceptable Make of DB/SP-MCB/RCCB – Havells Cat No

DHDPSHSDPC08

EA 13 0.00

80

CONDUIT- Supply and laying of medium class PVC conduit in

concealed/surface in wall/ ceiling/floor including all accessories such

as junction boxes, conduit bends, pulling wire, wall cutting and rough

plastering of wall , completed as required.) Conduit;-(AVONPLAST/

VIP/ PRECISION)

80A 50 mm dia PVC. conduit with all accessories. M 100 0.00













(Rs.)TOTAL (Rs.)

80B 40 mm dia PVC. conduit with all accessories. M 100 0.00

80C 32 mm dia PVC conduit with accessories M 100 0.00

80D 25 mm dia PVC. conduit with all accessories. M 100 0.00

80E 20 mm dia PVC. conduit with all accessories. M 500 0.00

81

SUB MAINS/CIRCUIT MAINS/POWER WIRING/FROM PANEL TO

LDB AND LDB TO SWITCH BOX :Supply, Wiring, testing and

commissioning of following size 1100V grade FRLS PVC insulated

multi strand copper conductor wires in existing conduit including end

termination with suitable copper lugs, Ferrules etc. ( Approved Make-

Finolex/Havells )

81A

2 runs of 1.5 Sq.mm FRLS PVC insulated multi strand Copper

conductor wires & 1 run of 1.5 Sqmm FRLS PVC insulated multi

strand Copper conductor earth wireM 1000 0.00

81B

2 runs of 2.5 Sq.mm FRLS PVC insulated multi strand Copper

conductor wires & with 1 run of 2.5 Sqmm FRLS PVC insulated

multi strand Copper conductor earth wire. M 3000 0.00

81C

2 runs of 4 Sq.mm FRLS PVC insulated multi strand Copper

conductor wires & with 1 run of 4.0 Sqmm FRLS PVC insulated

multi strand Copper conductor earth wire. M 1500 0.00

81D

2 Pair 0.5 Sqmm PVC( 2 Pair telephone cable) insulated multi strand

Copper conductor wires in the existing conduit M 1000 0.00

81E

RJ 6 ( TV Coaxial cable) Coaxial cable with proper slighter and junction

& connectors in existing conduit M 500 0.00

82

POINT WIRING :Supply, wiring, testing and commissioning of Point

Wiring for ( Light/ ceiling Fan/ exhaust fan & 6A independent socket)

with 1.5 Sqmm FRLS PVC insulated 1100V grade multistrand

Copper conductor wires and earthing the point with 1.5 Sqmm FRLS

PVC insulated 1100V grade multistrand Copper conductor wire, run

in existing PVC conduits concealed in wall / ceiling (wiring should

conforming to IS 732 ) (excluding circuit main) . payment for metal

box, conduiting, modualr plate, cover and switch and socket shall be

made seperately

approved Make of Wire of Finolex/Havell ) NOTE: The wiring

for point wiring under this item shall be measured from the switch box

up to the light / fan / socket only in utility areas other than those with

MCB controlled lights. The wiring from the respective LDBs to first

switch box shall be measured under the heading circuit mains.

82A

Single light point controlled by a 6A SP switch or bell push for light

point, ceiling fan point( excluding regulator), exhaust fan point, bell

point etcEA 400 0.00

82B Extended light point from the existing light point EA 50 0.00













(Rs.)TOTAL (Rs.)

82CTwo way light point controlled by 2no's 6 A Two way switches.at

Individual location. EA 50 0.00

83

supply and fixing of following wraparound modular base and cover

plate on existing metal box as required,

MK/Anchor/Crabtree/Roma/Havells make modular base plate and

cover plate

83A up to 3 module EA 100 0.00

83B 4 to 8 module EA 500 0.00

83C 12 module EA 50 0.00

84

supply and fixing of following modular switch/socket on existing

modular plate and switch box including making connections

MK/Anchor/Crabtree/Roma/Havells make modular switch/socket

84A oneway/two way 5/6 A switch EA 800 0.00

84B 15/16 A switch EA 350 0.00

84C 3 pin 5/6A socket outlet EA 350 0.00

84D 6 pin 15/16 A socket outlet EA 350 0.00

84E telephone socket outlet EA 80 0.00

84F bell push EA 50 0.00

84G stepped type electronic fan regulator EA 200 0.00

85

supply and fixing of following size metal boxes on surafce or in recess

including cutting wall, repair etc suitable for modular plate and

swithches complete

85A 75 x75 mm to 150x150 mm x 60 to 75mm depth EA 100 0.00

85B 200x125mm to 200x250mm size x 60 to 100mm depth EA 100 0.00

85C 200x300mm to 250x300mm size x 60 to 100mm depth EA 100 0.00

86supply and fixing callbell/buzzer suitable for single phase 230 V

complete as requiredEA 55 0.00

87

Supply, installation, testing & Commissioning of the following types of

light & fan fittings complete with Electronic ballast , connecting wire

with Lamps, all prewired up to the terminal block As per catalog

NOTE: All fittings shall be with energy efficient copper / Electronic

ballast. The rates quoted shall include all other accessories complete

as required for suspending the lights, fans to the required level as

shown in the respective drawings.(Philips/ Havells/Wipro). the

contractor shall submit the catalogue for Phillips and Havells and get

the fitting approved from GAIL before placing order.

87A

Supply, installation, testing and commissioning of 1 x 36 W

decorative compact energy efficient tubelight fitting with coloured end

caps and electronic ballast sitable for T8 fluoroscent tubelight complete

including cost of flouroscent tube light rod etc as required with all

fixing accessories.(HAVELLS- MODEL- DREAMLITE

ELECTRONIC, CAT NO 1X36 W T8 FTL- ORDER CODE-

LHDF20136025 MAKE OR EQUIVALENT PHILLIPS/WIPRO

MAKE)

EA 350 0.00













(Rs.)TOTAL (Rs.)

87B

Supply, installation, testing and commissioning of 1 X 15 Watts,

Decorative wall light fixture made up of Polycarbonate; suitable for

15W TU retrofit CFL (B-22 base) including CFL lamp, connectors and

all other fixing accessories as required

( Havells city series order code LHFODFE1TC1W015/

LHDL06160099 or equivalent Philips/Wipro/ make ).

EA 300 0.00

87C


Weather proof, anti corrosion wall/ceiling mounted opal colour

decorative, round shape engineering plastic housing with PC cover

suitable for 1x20W Retrofit CFL lamp including cost of CFL lamp,

Lamp holders, connectors and all other fixing accessories as required

( Havells- Korona brand order code LHKC06120099 or equivalent

, Philips/Wipro/ make).

EA 250 0.00

87D

Supply, installation, testing and commissioning of LED Skirting light 3

module with LEDs, Metal Box and all other fixing accessories as

required

( Legrand Cat. No.-674523 ).

EA 20 0.00

87E

Supply, installation, testing and commissioning of 1 X 36 Watts, CFL

Merror light to be wall/ceiling mounted with CFL flouroscent paralell

lamp,electronic ballast, connectors and all other fixing accessories as

required

( Havells- Lilliput extra order code LHDC15136025 with decorative

end caps and electronic ballast or Phillips/Wipro equivalent ).

EA 150 0.00

87F

Supply, installation, testing and commissioning of Bulkhead light with

CFL lamp, Lamp holders, connectors and all other fixing accessories

as required

( Havells order code no LHKL01160099 and/or Philips/Wipro Cat.

No.-FXC 101 ).

EA 20 0.00

87G

Supply, installation, testing and commissioning of ENDURA WALL

MOUNTED UP-DOWN LIGHT LED up/down wall mounted luminaire

with up-down beam (upto 50º) of light distribution on the wall or

coloumn, al. pressure die-cast housing used for better heat dissipation

with integrated HF electronic driver including lamps 10W LED 6K,

Havells Endura make order no LHEOOKP7IN6K010 or

phillips/Wipro equivalent

EA 5 0.00

87H

Supply, installation, testing and commissioning of Decorative wall

mounting SS finish fixture with textured glass/opal PC diffuser suitable

for 40W mini GLS/candle lamp including lamp . Havells

Voila/Ebony/Atrix/ make order no LHJE

04104499/LHJE03104499/LHJE01104499 or Phillips/Wipro

equivalent

EA 20 0.00

87I


Halogen Spot light with 50w12VDC lamps, Requaired Gear Box, Lamp

holders, connectors and all other fixing accessories as required.

(Philips/Havell/Wipro make).

EA 5 0.00













(Rs.)TOTAL (Rs.)

87J

Supply, installation, testing and commissioning of 1 x 25Watts, Deco

Twist Circular CFL Light with CFL lamps, Lamp holders, connectors

and all other fixing accessories as required (Philips Cat. No. DECO

TWIST LUX CLD BCS 1902 or Wipro/Havell equivalent ).

EA 5 0.00

87K

Supply, installation, testing and commissioning of 2 x 36 Watts, In

door Decorative Light with FTL lamps, Lamp holders, Electronic Blast,

connectors and all other fixing accessories as required (Philips Cat.

No. TCS 306/ 236 HFE or Wipro/Havell equivalent) EA 4 0.00

87L

Supply, installation, testing and commissioning of 2 x 28 Watts, Light

fixture with FTL lamps,Electronic Blast, Lamp holders, connectors and

all other fixing accessories as required (Philips Cat. No. tcs 350/228

c5 HF or wipro/Havell equivalent ). EA 4 0.00

87M

Supply, installation, testing and commissioning of 4 x 28 Watts, Light

Fixture with FTL lamps,Electronic Blast, Lamp holders, connectors

and all other fixing accessories as required (Philips Cat. No. TPS

325/ 428 HF or wipro/havell equivalent ).

EA 2 0.00

87NSupply & Installation of electronic Calling Bell With Continues Duty.

EA 55 0.00

87O

Supply, erection, testing and commissioning of ceiling fan with 300mm

length down rod ,double ball bearings, accessories, connecting wire

and other standard accessories as required but excluding regulator.

1200mm Sweep, 3 blade ceiling fan .

BAJAJ/CROMPTON/HAVELL MAKE

EA 200 0.00

87P

400 Sweep Wall mount Air circulator with full set complete With fixing

hardwares BAJAJ/CROMPTON/HAVELL MAKE EA 15 0.00

87Q

EXHAUST FAN-Supply and Erection of exhaust fans with sheet metal

blades, necessary brackets, anti corrosive epoxy painting, rubber

cushions- 305 mm dia, 900 Rpm industrial exhaust fan

etc.BAJAJ/CROMPTON/HAVELL MAKE

EA 48 0.00

87R

Supply, installation, testing and commissioning of 250W MH Flood

light fitting along with all accessories such as Gear box, lamps etc as

required with all fixing accessories (PHILIPS CAT NO: MWF

300AK/ 250(ASYM) or Havells order no LHFY36125C99.

EA 6 0.00













(Rs.)TOTAL (Rs.)

88

LOAD BREAK SWITCHES / SOCKETS/Supply, erection, testing and

commissioning of factory made metal clad Plug and top totally

enclosed with metal housing with industrial socket/interlocked

combined rotary switch and socket with scrapping earth connection

and plug top. In case of interlocked socket, the interlocking should

ensure that the plug cannot be inserted or withdrawn while the switch

is in 'ON' position. (all switches & sockets shall be housed in painted

MSboxes). The erection rate shall include supply of angle iron frame

work and fixing accessories such as grip bolts/grouting/ welding to

steel structures etc.

88A

20Amps, Single phase metal clad industrial socket with plug top with in

and including 20 Amps SP(10KA) MCB.(Legrand/HAVELL/l&t

MAKE : )EA 10 0.00

88B

32Amps, Three phase metal clad industrial socket with plug top with in

and including 32 Amps TPN(10KA) MCB.(Legrand/HAVELL/L&T

MAKE)EA 5 0.00

89

Supply ,Termination and fixing of Information outlet shuttered, ( RJ11

jack) with 2 Pair Power Cat Data Gate Jack shuttered with including

Face Plate, with level holders including Metal box ( MK Cat No:- ) EA 25 0.00

PART-D

90

Earth work in excavation in all types of soil including soft poclainable

rock over areas (exceeding 1.5 m in width as well as 10 sqm on plan)

for all Levels & lifts , including Clearing jungle ,stripping of top

weathered soil by mechanical/manual means, i/c uprooting of rank

vegetation, grass, bush wood,including necessary

shoring,struting,dewatering dressing of sides and ramming of bottom,

including disposal of excavated soil at the risk of contractor out side

the premises at recommended local authorised dumping ground to be

neatly levelled and dressed etc complete all as directed. in foundation

and open areas,

M3 1000 0.00

91

earthwork in excavation by manual/mechanical means in foundation

trenches for drain and foundations not exceeding 1.5 mtr in depth

including dressing and ramming of sides and bottom, lift up to 1.5 mtr

including getting out the excavated soil and disposal of surplus earth

within the plot as directed upto 300 mtr lead- all kinds of soil

M3 500 0.00

92

excavating trenches of required width for sewerage and water pipe,

including dressing of sides, ramming of bottoms for depth up to 1.5 mtr

including getting out the excavated soil and then returning the soil as

required in layers not exceeding 20 cm in depth, including

consolidating each deposited layer by ramming, watering , etc and

disposing of the surplus excavated soil as directed within the plot site-

in all kinds of soil and soft rock for pipe/cable up to 150 mm dia

M 500 0.00

EXTERNAL DEVELOPMENT













(Rs.)TOTAL (Rs.)

93

excavating trenches of required width for sewerage and water pipe,

including dressing of sides, ramming of bottoms for depth up to 1.5 mtr

including getting out the excavated soil and then returning the soil as

required in layers not exceeding 20 cm in depth, including

consolidating each deposited layer by ramming, watering , etc and

disposing of the surplus excavated soil as directed within the plot site-

in all kinds of soil and soft rock for pipe/cable exceeding 150mm but

not exceeding 400mm

M 200 0.00

94

Banking / filling with available yellow SOIL suitable for horticulture and

lawns ,having obtained from borrow pits outside the Township

premises at the cost and arrangement of the contractor and spreading

in layers not exceeding 200 mm in depth, breaking clods, watering and

levelling to required slope,Payment shall be made for consolidated

thickness after deducting voids as per standard specification).

M3 2500 0.00

95

Filling in Plinth and where ever called for brought from outside the

Premises including all lead and lift,in layers not exceeding 300mm

thick (compacted) including watering , ramming , consolidating and

dressing etc., complete all as directed.- Local River Sand.

M3 100 0.00

96

Supplying, stacking and laying hard stone aggregate of graded size

63mm to 45mm , including spreading to required gradiant and

camber,consolidating with 8-10 Tonnes Road Roller including making

good the undulatins etc., with approved quality of stone screening and

binding material obtained from approved quarry etc.,complete all as

directed.

96A 63-45mm Thk Brick Jelly Filling M3 50 0.00

96B 90-150mm boulder Filling M3 50 0.00

97Supplying chemical emulsion in sealed containers including delivery as

specified- ChloropyriphosLindane emulsifyable concentrate of 20%, LITRE 500 0.00

98

Diluting and injecting chemical emulsion for POST

CONSTRUCTIONAL ANTI TERMITE treatment ecluding the cost of

chemical emulsion- along the external wall below concrete or

masonary apron using chemical emulsion at 2.25 litres per linear metre

including drilling and plugging holes etc- with chloropyriphos/lindaine

EC 20% with 1% concentration

M 600 0.00

99

Providing and laying plain cement concrete 1:3:6 (1 cement : 3 coarse

sand :6 graded stone aggregate 20mm nominal size) including

necessary shuttering in leveling courses under foundations, pipelines,

pits, under floors etc., complete at all levels and locations as directed

as per drgs.

M3 150 0.00

100

Providing and laying plain cement concrete 1:2:4 (1 cement : 2 coarse

sand : 4 crushed graded stone aggregate 20 mm nominal size) in

foundation, plinth protection, plinth level, above floor level upto five

floors string or lacing courses, copings, bed blocks, anchor blocks,

window cills and like including necessary shuttering and centering at all

levels and locations etc., complete as shown in drawings and as

directed .(if reinforcement is provided will be measured and paid

separately under respective item of BOQ)

M3 150 0.00













(Rs.)TOTAL (Rs.)

101

Providing and laying reinforced cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 crushed graded stone aggregate 20 mm nominal size)

in foundation, plinth protection, plinth level, above floor level upto five

floors string or lacing courses, copings, bed blocks, anchor blocks,

window cills and like including necessary shuttering and centering at all

levels and locations etc., complete includinh shuttering as shown in

drawings and as directed .(if reinforcement is provided will be

measured and paid separately under respective item of BOQ)

Foundations, Footings , rafts, Grade Slabs pedestral, beam, coloumn,

chajja, parapet, and like

M3 50 0.00

102

Supply, Fabricating & fixing in position reinforcement for RCC work

with Thermo mechanically Twisted (TMT) bar of various diameters and

grade of steel as specified below conforming to IS specification

including cutting, providing, supplying & bending, hoisting, fabricating

and placing in position according to drawings and binding the

reinforcement with GI annealed binding wire in two strands of 18 gauge

and providing PVC cover blocks for placing the reinforcements in

position and for maintaining the cover specified and/or according to

relevant IS. Note : Unless noted otherwise the measurements in

accordance with IS 1200. However reinforcement shall be measured

only in lengths of bars as actually placed in position on standard weight

basis, no allowance being made in the weight for rolling margin.

Authorised laps and splices, chairs of any shape & profile, TMT bars of

grade Fe-500 conforming to IS - 1786/85

MT 5 0.00

103

Supplying and mixing integral water proofing admixture of PIDILITE,

CICO or equivalent brand as per manufacturer specifications per 50 kg

bag of cement to be mixed with cement concrete to make it water tight

or to reduce the permeability as per manufacturers specifications.

per bag

of

cement

100 0.00

104

Providing brick work using M-35 grade bricks( with minimum

compressive strength of 35kg/sq cm ) in cement mortar 1:6 (1 cement :

6 coarse sand) in substructure and superstructure for all heights in

wall, manhole, drain, toe wall, plinth wall, parapet, etc including

scaffolding, staging ,curing etc., complete.

M3 300 0.00

105Providing and fixing of 12 mm thick prelaminated Particle Board with

lamination on both side IS12823/IS 3083 marked for panelling ,

shutter,etc.including necessary screws, plug etc

M2 10 0.00

106

providing and fixing on roof pressed clay tile( Mangalore tiles) of 20

mm thick and of approved size and of approved pattern jointed with

cement mortar 1:4 , (1 cement : 4 coarse sand) mixed with 2% integral

water proofing compound laid over a bed of 20mm thick cement mortar

1:4 (1 cement : 4 coarse sand) ,with required cement mortar battens

wherever necessary and finished neatly etc complete

M2 30 0.00

107

Supply, fabrication and erection in position structural steel sections

made out of angles , flats, square bars, channels as per drawing

including two coats of synthetic enamel paint over and including a coat

of approved zinc chromate primer all as specified by Engineer - in -

charge.

KG 3000 0.00

108

stell work in built up tubular( round,square or rectangualr hollow tubes

etc) trusses, etc including cutting, hoisting, fixing in position and

applying a primer coat of approved steel primer including welding and

bolted with special shaped washers etc complete- hot finished welded

tupe tubes

KG 500 0.00













(Rs.)TOTAL (Rs.)

109

proving and fixing UV stabalized fibre glass reinforced plastic sheet

2mm thick roofing up to any pitch, including fixing with polymer coated

J or L hooks, bolts and nuts 8mm dia GI plain/bitumen washer

complete but excluding the cost of purlins, rafters, trusses etc. the

shall be of uniform pigmentation and thickness and without air pockets.

the sheets shall be opaque or translucent, clear or pigmented, textured

or smooth as specified.

M2 50 0.00

110

Supply and fixing of 50x50mm size 4 mm dia GI chain link fencing

including inserting & fixing of 5 rows of 12 mm dia MS rods stiffners

alternatively insrted at 1mt. c/c in to chainlink fencing fixed through

out the entire length etc., complete all as shown in the drawing and as

directed.(MS rods and turn buckles shall be measured and paid

seperately)

M2 50 0.00

111

Providing,Fabricating, laying and embedding (in Concrete / Brick wall)

Puddle flanged (screwed/welded) MS Pipe of C class,as per IS 1239

in wall up to 750mm max. length, including cutting, drilling and welding

anchor plate in square or circular size 8mm thick and end flanged of

10mm thick MS plate of table "E" type, MS Plate size provided with

75mm extra width all sides of the pipe outer dia welded to MS pipe and

providing holes to flange to match the connecting GI Pipe line.The

welded assembly of puddle flanges shall be galvanized, i.e., the zinc

coating shall be done as per IS 4736:1986

111A a) 200mm dia EA 1 0.00

111B b) 150mm dia EA 1 0.00

111C c) 100mm dia EA 1 0.00

111D d) 80mm dia EA 1 0.00

111E e) 50mm dia EA 1 0.00

112

Providing and fixing of MS footrest in manhole, water tank etc with

20mm diameter round bar including embedding in concrete or fixing

with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement :3 coarse

sand :6 graded stone aggregate 20mm nominal size) as per standard

design etc., complete all as directed.

EA 25 0.00

113Supply & Fixing of Medium Duty 'CI' manhole Cover without frame,

weight not less than 58 kg ISI marked of size 455x610mm with frame

of minimum weight of 60 kg in RCC works etc., complete .

EA 6 0.00

114

Providing and laying NP-2 class RCC Hume Pipes with collars jointed

with stiff mixture of cement mortar 1:2 (1 cement : 2 fine sand)

including testing of joints complete- 250/300mm dia RCC pipeM 25 0.00

115

Providing and laying NP-2 class RCC Hume Pipes with collars jointed

with stiff mixture of cement mortar 1:2 (1 cement : 2 fine sand)

including testing of joints complete- 100/150mm dia RCC pipeM 25 0.00













(Rs.)TOTAL (Rs.)

116

Pressure grouting- Drilling 12mm dia holes with electrical drilling

machine along the construction joints or honeycomb areas (at every

500mm c/c along construction joints in staggered pattern) to a depth

of 25mm and fixing PVC nozzle of 10mm dia in place using quick

setting compound or equivalent. Pressure grouting with approved

make cement based waterproofing compound using hand operated

pressure grouting pump with a pressure of 2 to 3 kg/sq.mt through the

nozzles by starting from one nozzle and and stopping when the grout

starts coming out from adjacent nozzle and similarly carrying out

grouting operation in all the nozzles as per Manufacturers

specifications in all the points including the cost of material, labour for

carrying grouting operations etc complete rate quoted shall be for each

point

EA 200 0.00

117Providing and applying 12 mm cement plaster CM 1:3 finished with a

floating coat of neat cement inside the water tank mixed with approved

water proofing compound

M2 400 0.00

118

Prepearation and Consolidation of existing WBM road with power road

roller 8 to 10 tonne capacity including making good the undulations

with hard aggregate and murrum( to be supplied and paid for

seperately) and rolling the existing WBM surface as per road profile

and slope, including scarifying the metalled road, removing vegetating,

cleaning and disposal of malba etc complete all as directed.

M2 2000 0.00

119

Providing and laying granular sub-base/WBM with 63-40 mm

aggregate and consisting of sand, moorum, crushed stone and gravel

mixed in proportions as specified as per MOST specifications below:M3 100 0.00

120

Providing and fixing in position M25 grade Factory made Precast kerbs

/ drain cover of approved make of minimum M-25 grade in straight

road and 300mm to 750mm in curvature as per drawings and

architectural details with approved samples.

M3 20 0.00

121

Providing and laying in position ready mix M-25 grade concrete for

road works with automatic batching plant, transported to site in transit

mixer for all leads having continious agitated mixture, manufactured as

per mix design of specified grade including pumping of RMC from

transit mixer to site and centring and shuttering, compaction, finishing,

levelling, curing, cost of admixtures in recommended proportions but

excluding the cost of reinforcement

M3 500 0.00

122

Making `T' connection from the Corporation water supply main line with

all necessary works and specials including road cutting and making

good the road after the connection etc., complete. The quoted rate

shall include for the necessary road cutting charges to be paid to

corporation/ statutory body and liason work with the authorities for

obtaining orders (The necessary official deposits, incidental expences

shall be paid by the employer).Lump sum rate is to be quoted for one

complete activity unit/job

EA 1 0.00













(Rs.)TOTAL (Rs.)

123

Providing, fixing, testing and commissioning of SDR PVC in class of

SN-4 (IS:15328 -2003) special designed for Underground Non-

pressure applications with latest amendment soil waste and vent self

socket pipes, jointed with solvent cement inclusive of all necessary

specials like bends, tees, offsets, junctions, pan connector, etc., laid

under floor/under ceiling/on walls with suitable clamps including

making bores in masonary / RCC slabs etc., and rendering the bores in

cement mortar after laying the pipes and specials curing etc.,

complete, excavation will be paid seperately123A a) 110mm dia. M 30 0.00

123B b) 160mm dia. M 50 0.00

123C c) 200mm dia. M 50 0.00

123D d) 300mm dia. M 50 0.00

124

Providing & Fixing of inspection chamber for storm water and

sewerage with 230mm M-35 bricks in CM 1:4 over a bed of 150mm

thick PCC 1:4:8, walls plastered inside smooth in CM 1:3 and outside

in CM 1:6, necessary excavation in all sorts of soil, back filling,

consolidation and disposing the surplus material within lead of 200m or

as directed, benching and channelling in PCC 1:2:4 as per drawing

finished with neat cement , etc., complete (Depth of chamber not

exceeding 0.9m). Inside Size approx- 600x600mm /600 x 450mm size

excluding cost of manhole cover

EA 20 0.00

125

Providing & Fixing of inspection chamber for storm water and

sewerage with 230mm best quality approved table moulded bricks in

CM 1:4 over a bed of 150mm thick PCC 1:4:8 walls plastered inside

smooth in CM 1:3 and outside in CM 1:6, necessary excavation in all

sorts of soil, back filling, consolidation and disposing the surplus

material within lead of 200m or as directed, benching and channelling

in PCC 1:2:4 as per drawing finished with neat cement , CI steps etc.,

complete (Depth of chamber not exceeding 1.5m).inside Size -

900x800mm chamber, excluding the cost of manhole cover

EA 5 0.00

126providing and fixing in position precast RCC Heavy Duty manhole

cover and frame of required shape and approved qulaity- heavy duty

circular shape of 560 mm internal dia cover

EA 30 0.00

127providing and fixing in position precast RCC Heavy Duty manhole

cover and frame of required shape and approved qulaity- heavy duty

rectangular shape of 600 x 450 mm size

EA 60 0.00

128

Providing conical manhole for storm water and sewerage with 230mm

M-35 bricks in CM 1:6, 600mm approx inside dia at top and 900 to

1000mm inside dia at bottom over a bed of 250mm thick PCC 1:4:8,

walls plastered inside smooth in CM 1:3 with neat cement finish and

externally in CM 1:6, necessary excavation in all sorts of soil, benching

and channelling in PCC 1:2:4 as per drawing finished with neat cement

, for manhole depth up to 1.65 Mtrs, but exculding the cost of manhole

cover

EA 10 0.00

129Providing and fixing square mouth SW gully trap with CI grating, brick

masonary chamber with water tight CI cover and frame of 300x300mm

size- 100x100 mm size gully trap

EA 30 0.00













(Rs.)TOTAL (Rs.)

130

Domestic water pumped to OHT- Supply & Fixing of Hydro pneumatic

pumping system- KIRLOSKAR MAKE consisting of 03Nos of Mono

block pump and motor with electrical protection, Common inlet and out

let manifolds, Non-return valves and isolating valves for each pump on

the outlet side, pressure gauge on the outlet manifold, a control panel-

comprising of DOL starter and overload protection and indicating lamp

etc to electrically switch on/off the pumps, all necessary electric cable

interconnections for the above items , RATE TO BE QUOTED

COMPLETE FOR A SET OF THREE PUMPS INCLUDING ALL

CABLING, STARTER, GAUGE, NRV, INLET OUTLET VALVE AND

FLANGES AND GAUGE AND CONTROL PANEL WITH INDICATING

LAMP, OVERLAOD PROTECTION ETC

EA 1 0.00

Capacity : 10cum/Hr @ 50m head

Suction Side

80mm dia brass strainer

80 mm dia- ball valves

Delivery Side


65 mm dia-Non-return Valves

131

Pump for gardening- Supply & Fixing of Hydro pneumatic pumping

system- KIRLOSKAR MAKE consisting of 01No of Mono block pump

and motor with electrical protection, Common inlet and out let

manifolds, Non-return valves/Foot valve and isolating valves for pump

on the outlet side, DOL starter and overload protection and indicating

lamp etc to electrically switch on/off the pumps, all necessary electric

cable interconnections for the above items , RATE TO BE QUOTED

COMPLETE FOR PUMP INCLUDING ALL CABLING, STARTER,

GAUGE, NRV, INLET OUTLET VALVE AND FLANGES AND GAUGE

ETC

EA 2 0.00

Capacity : 5cum/Hr @ 40m head

Suction Side

50mm dia brass strainer


Delivery Side


40 mm dia-Non-return Valves

132

Reverse osmosis plant- Supply, installation, testing and commissioning

of Revese osmosis plant with feed pump(1w+1s), multigrade filter,

antiscaling dosing system,micron catridge filter,high pressure pump,

desalination by RO ,RO block, RO skid, SS grade 304 RO treated

water storage tank of 0.4 mm thick of 2000 ltr capacity, with all

accessories and control panel and wiring and consumables like brine,

calcium hypo chlorite, RO antiscalant, lubricants for atleast six month

operation complete.R.O Capacity : 600 litre/hr. before quoting the

rates, the bidder may go through the detailed technical specifications

and drawings as attached along with the bid document- approved

make ion exchange, BS engineers,

EA 1 0.00













(Rs.)TOTAL (Rs.)

133

Level Sensors-Supply, Installation & Commissioning of level sensor

(for domestic & RO water tanks) with complete working system

consisting of control panel , probe-mounted vertically from water tank,

adjustable, switching hysteresis for pump control application, main

supply 230V, 50 Hz. These to be housed in stoving enamel painted

cast aluminium weather proof suitable for wall mounting, will be used

for mounting levels in water tank (HL,LL) and interfaced with pump

controller for automatic pumping. All complete as per approved

manufacturer's specification. Rate quoted shall include for carrying out

control armoured copper multicore cabling from level switch located on

water tank upto motor and starter interconnection inside pump room

with necessary contactors for starter of pumps a) Control cables for

level sensor to transfer pumps.

EA 1 0.00

134

Supply, Installation & Commissioning of level sensor with display (for

raw water tank) with complete working system consisting of control

panel , probe-mounted vertically from water tank, adjustable, main

supply 230V, 50 Hz. These to be housed in stoving enamel painted

cast aluminium weather proof suitable for wall mounting, will be used

for mounting levels in water tank (HL,ML,LL). All complete as per

approved manufacturer's specification. Rate quoted shall include for

carrying out control armoured copper multicore cabling from level

switch located on water tank.

EA 1 0.00

135

Approval for load sanction and contract demand for1 210 KVA (at 11

KV) with State Electricity Borad as per following scope of work:-

1.Prepration of all drawings and documents required for obtaining

approval/sanction.

2.Submission of drawings and documents to the appropriate

authority/office with a copy to EIC.

3.Complete liasioning with state electricity board.

4.Payment of all statutory fees. The statutory fees, security deposits

and contract demand charges shall be reimburshed by GAIL on

production of original Challan.

5.Arranging inspections by statutory authorities. The travelling,

loadging, boarding and other expenses of statutory authorities shall be

born by the contractor.

6.Doing regular follow-up.

7.Any other related job to obtaining the load approval / contract

demand.

8.Final charging of 11 KV Sub - Station. Lump sum rate is to be

quoted for one complete activity unit/job

EA 1 0.00

PART E- EXTERNAL ELECTRIFICATION

STATUTORY APPROVALS













(Rs.)TOTAL (Rs.)

136

Approval & running permission for 350 KVA DG Set

Following are the scope of work:-

1.Preparation of drawing & document.

2.Submission of drawing & document to the concerned authority /

office with a copy of all correspondence to EIC.

3.Payment of drawing approval fees. (Shall be reimbursed on

production of original challan)

4.Submission of work completion report as per approved drawing.

5.Arranging the inspection of the installation. The traveling, lodging,

boarding and other expenses of statutory authorities for inspectons

shall be born by the contractor.

6.Follow up at various level.

8. Supply, erection and commissioning of energy meter (Make –

Secure, Model – Premier, 3 phase 4 wire, BIS marked, Trivector Static

Energy Meter with sealing facility, LCD Display, 0.5 Class with pre

loaded BCS Software and cable for reading, downloading meter data

to PC/ Laptop .

9.Payment of inspection fees. (Shall be reimbursed on production of

original challan)

10. Any other related job to obtain approval and running permission.

11. 320 KVA DG Set shall be procured by GAIL. Lump sum rate is to

be quoted for one complete activity unit/job

EA 1 0.00

137

Supply and providing Electrical single line diagrams (As Built drawing)

of total project scheme with laminated frame along with 5 hard copies

of drawings and a soft copy in CD . EA 1 0.00

138

Supply and providing 4 nos of red color painted Fire buckets round

bottom of 9 Ltrs capacity filled with dry sand with including suitable

angle iron support red color painted. EA 1 0.00

139

Supply and providing laminated Shock treatment chart with teak wood

frame and glass cover as approved by Electrical Inspectorate. EA 1 0.00

140

Supplying & Erection of Rubber mats of 11 KV grade 2.0 Mtrs x 1.0

Mtrs and of 2mm thickness as required by the Electrical Inspectorate

and confirming to IS 15652-2006 EA 20 0.00

141

Supply and Installation of 5KG capacity ABC type fire extinguishers

complete with mounting brackets, spray nozzles, connecting pipes,

"OPEN / CLOSE" valve, Pressure indicator with all other necessary

accessories complete as required. (make: USHA, fire pro).

EA 5 0.00

142

Supply and providing of 11KV grade hand gloves with chalk powder,

Acid handling apron, Portable Acid wash shower, including suitable

weather proof transparent box with lock and keyEA 2 0.00

143Supply and providing of First Aid Box as per IS standard.

EA 1 0.00

144Supplying & Erection of 11 kV danger board stickers in hindi and

english, as per MPSEB requirement. EA 20 0.00

145Supplying & Erection of 415 V danger board stickers in hindi and

english, as per MPSEB requirement. EA 50 0.00

11 KV HT Job













(Rs.)TOTAL (Rs.)

14611 KV, 3 Phase Overhead HT Line work comprising of following:-

M 125 0.00

A. Supplying & Fixing 11kV Pin / Disc insulators confirming to IS-731 /

1971 & IS 2486 (Part-II)/1989 on existing structure / pole etc. as

required along with complete accessories including Cross arms, Top

Clamps, Guarding Cross arms, etc. (M/s. JSI / BHEL / HTIF / Punjab

Ceramic / W S Ind. / Allied Ceramic / India Potteries / or any reputed

make)B. Supplying and laying of A.C.S.R. weasel conductor confirming to IS-

398 (Part-I & II) / 1996 of overall dia. of 7.77mm on the existing pole on

insulators including binding, testing, commissioning etc.

C. The 11KV guarding cross arm is to be fitted on the pole( which are

already erected, and if any extra pole is to be installed the same shall

be apid seperately) as per standard engineering practice for guarding

the line with 8 SWG GI wire as guard wire and 10 SWG GI wire for

lacing. Guarding cross arm made of 75x40x6 mm angle 5 feet long

should be clamped at 300mm below the bottom arm of ‘V’ cross arm.

D. ANTI-CLIMBING DEVICE: Barbed wire weighing 3.5 Kg per pole

should be wrapped at a height of 3000 mm above ground level

stretching in 900 mm length. Both ends of barbed should be clamped

suitably to avoid coming down from its location.

E. DANGER BOARD: Danger Board for 11KV voltage and danger

mark conforming to IS:2551-1963 should be fixed on each location.

F. GUYS: The guys shall consist of anchor plate, stay rod with bow

and ratchet assembly, thimbles stay wires, stay grips and stay clamps.

All iron fittings of stay shall be painted with Red Oxide paint. The

minimum size of stay wire shall be 7/4.0 mm with and ultimate

breaking strength of 6450 Kg. The stay rod shall be 20 mm dia 2

meters long fitted with bow and ratchets assembly having ultimate

tensile strength of 8000 Kg. The anchor plate shall not be less than

300 x 300 x 6 mm size made up of mild steel. Turnbuckles with 20 mm

dia. screw shall have ultimate breaking strength of 8000 kg.

147

Supplying, installing, testing and commissioning of 11 KV, 400 Amp.

three phase, HT gang operated off load, tilting. Single Air Break

isolator switch suitable for horizontal & vertical mounting confirming to

IS 9921/1985 (Part I to IV) complete with arching horn, pad locking

arrangement in ON/OFF positions & manual operating mechanism etc.

complete in all respect. (Make- Kiron / Pactil / Atlas or any reputed

make).

EA 1 0.00

148

Supply and Laying and XLPE insulated, armoured and PVC sheathed

power cable 3 core, 11 KV grade of size 125 Sq. mm as per relevant

IS Standard. Acceptable makes are RR Kable / Radiant Cable /

Universal Cable / Torrent cables / Havells or reputed make.

M 50 0.00

149

Supply, installation and commissioning of 11 KV grade HT termination

kit for out door application and suitable for 3 Core, 125 Sq mm

armoured AL Cable. Acceptable Make - RayChem / M-seal or

equivalent

EA 1 0.00













(Rs.)TOTAL (Rs.)

150

Supply, installation and commissioning of 11 KV grade HT termination

kit for Indoor application and suitable for 3 Core, 125 Sq mm armoured

AL Cable. Acceptable Make - RayChem / M-seal or equivalentEA 2 0.00

151

Re-Commissioning of 11KV, Swich board consistion of 3 modules of

Vaccum Circuit Breaker panels (Which are already available at site) as

per details and scope of work as mentioned below:-

Make- Jyoti Ltd.

VCB Model - VK- 10J25

Current Rating - 630 Amp

Rated Breaking Current – 25KA

Protection available:-

Over current and Earthfault (CDG61E610ZRCM Control Voltage –

110V DC)

Metering available:-

Voltmeter and Ammeter only.

The scope of work shall be as follows:-

1. Complete testing of VCB by OEM or experienced agency

2. Checking and calibration of protective relays.

3. Relay co-ordination and setting of trip/ alarm limits.

4. Preparation of 10 sets of Hard copy and soft copy of Power and

control drawings of 11 KV switch boards.

5. Checking of all power and control components of 11 KV Switch

Boards

6. Final charging of 11 Kv Switch Board.

EA 1 0.00

152

Re-commissioning of 500 KVA 11 KV/433 V, Dyn11, ONAN Power

Transformer as per following scope of work:-

1. Performing routine tests

2. Checking ,testing, cleaning and on site correction of problem if any

of Transformer and associated cables.

3. Filtration, drying and degassing of transformer oil.

4. Testing (DGA) of Transformer oil from NABL accredited Lab

5. Final Charging of Power Transformers.

EA 2 0.00

LT & OTHER JOBS

153

Unloading, shifting, erection and commissioning of LT Panel consisting

of 3 ACB Incommer Feeders (2 Nos 800 A and 1 No 630 Amps), 1

Change Over Switch (4 Pole, 630 Amps), 20 Out going feeders (10

Nos 200 Amps MCCB, 5 Nos 125 Amps MCCB and 5 Nos 63 Amps

MCCB). The LT Panel shall be provided by GAIL

EA 1 0.00

154Unloading, shifting, erection and commissioning of 320 KVA DG Set.

The 320 KVA DG Set shall be provided by GAILEA 1 0.00

155

Supply, erection and commissionin of Automatic Power Factor

Correction Panel of capacity 150 KVAR wcomplete with Heavy duty

can Type Capacitors, Microprocessor based Controller, Display Unit,

Current Transformer, associated complete cable work etc. Aceeptable

make Havells/ L&T / Schneider Electric or Equivalent

EA 1 0.00













(Rs.)TOTAL (Rs.)

156

Supply, Erection and commissioning of Factory made Power

Distribution Board as mentioned below:-

The PDB shall be of outdoor application with surface mounting having

dust and weather proof and shall be of double door type with protection

class of IP 62. The PDB shall be supplied with rain protection canopy

and suitable base frame. All cable entry shall be from bottom only. The

PDB shall be lockable and shall have fully insulated bus-bars of

capacity 200 Amps minimum, Neutral bus bar, Earth Bus bar Level

Marks. The PDB shall have outgoing cable allay.

There shall be 1 Incomer MCCB (200 Amps, 3 Phase + N, 415 V, with

settable magnetic trip) , 14 Outgoing out puts (63 Amps, 3 Phase, 415

V MCCB each) and 6 Outgoing out puts (10 Amps MCB, 1 Phase

each).

Each 63 Amps capacity out going feeder shall have latest reputed

make digital energy meters confirming to latest IS Standard with

accuracy 0.5 or better. Resin Cast CT of reputed make shall be used.

The PDB shall have LED indications for R,Y and B Phase.

Acceptable Make of panel or panel components are Havells / L&T /

BCH / SIEMENS / ABB or Equivalent.

EA 2 0.00

157











settable magnetic trip) , 10 Outgoing out puts (63 Amps, 3 Phase, 415

V MCCB each) and 6 Outgoing out puts (10 Amps MCB, 1 Phase

each).







EA 3 0.00













(Rs.)TOTAL (Rs.)

158











settable magnetic trip) , 6 Outgoing out puts (63 Amps, 3 Phase, 415 V

MCCB each) and 4 Outgoing out puts (10 Amps MCB, 1 Phase each).







EA 1 0.00

159











settable magnetic trip) , 2 Outgoing out puts (63 Amps, 3 Phase, 415 V

MCCB each) and 3 Outgoing out puts (10 Amps MCB, 1 Phase each).







EA 1 0.00













(Rs.)TOTAL (Rs.)

160


Distribution Board with 1 Incomer (150 Amps 3 Phase, 415 V MCCB

with settable magnetic trip. Proposed Incoming cable is 3.5 Core 150

Sq mm ALuminium armoured Cable) and 18 Outgoing Phase

segregated out puts (32 Amps, 1 Phase each MCB) and 6 outputs (10

Amps, 1 Phase each MCB). Each 63 Amps capacity out going feeder

shall have latest reputed make digital energy meters confirming to

latest IS Standard with accuracy 0.5 or better. Resin Cast CT of

reputed make shall be used. All cable entry shall be from bottom

only.The PDB shall have outgoing cable allay.The PDB shall be of

outdoor application with surface mounting having dust and weather

proof and shall be of double door type with protection class of IP 62.

The PDB shall be supplied with rain protection canopy and sitable

base frame. The PDB shall be lockable and shall have fully insulated

bus-bars of capacity 150 Amps minimum, Neutral bus bar, Earth Bus

bar Level Marks etc. Acceptable Make of panel or its components are

Havells / L&T / BCH / SIEMENS / ABB or Equivalent.

EA 1 0.00

EARTHING JOBS

161

Supply, making, testing & commissioning of EARTHPIT with 65mm

dia., heavy gauge 3000 mm long GI Earth Electrodes& all necessary

materials, including excavation of earthpit, filling with charcoal and salt,

backfilling, preparing chamber with brick, Cover etc.as per IS Standard

EA 20 0.00

162Supply and laying of 50X6 mm GI strip in plastered surface or in

excavated trenches including supply and fixing of required hardware.

Joints shall be welded and painted.

M 900 0.00

163Supply and laying of GI wire/rope of 8 mm dia including termination

(which includes supply of suitable Aluminum lugs at both ends) M 250 0.00

164

Termination of GI Wire rope. It included Lugging of GI Wire rope (8

mm dia) of a given lenghth at both ends and mounting with Nuts and

Bolts at both ends. Supply of reputed make of Lugs and hardwares are

included in the scope.

EA 200 0.00

OUTDOOR LIGHTING JOBS

165

Supply, Erection and commissioning of 9 meter tubular, swaged, single

bracket type street lighting pole conforming to IS 2713 with Philips

luminair Model CRP320 SON-T 70W(E) SG (Ordering No 1310 19015)

complete with control gear, Lamp, Associated control gear and inside

pole cabling and mounting hardwares. Associated civil work is included

in the scope. Pole shall be painted with one coat of premier and two

coats of silver paints.

EA 55 0.00

166

Supply, Erection and commissioning of Philips luminair Model

Leonardo / Havells decorative post lamp or equivalent complete with

pole / junction box, Lamp, Associated control gear cabling and

mounting hardwares.

EA 40 0.00













(Rs.)TOTAL (Rs.)

167

Supply, Erection and commissioning of Factory made Lighting

Distribution Board (with Digital Timer) with 1 Incomer (125 Amps 3

Phase, 415 V, Proposed Incoming cable is 3.5 Core 70 Sq mm

ALuminium armoured Cable) and 6 Outgoing Phase segregated out

puts (63 Amps, 1 Phase each). The LDB shall have latest reputed

make digital settable timer for its operation. The LDB shall be of

outdoor application with surface mounting having dust and weather

proof and shall be of double door type with protection class of IP 62.

The LDB shall be supplied with rain protection canopy and sitable base

frame. The LDB shall be lockable and shall have fully insulated bus-

bars of capacity 100 Amps minimum, Neutral bus bar, Earth Bus bar

Level Marks etc. Acceptable Make of panel and its components are

Havells / L&T / BCH / SIEMENS / ABB or Equivalent.

EA 5 0.00

168

Cable Glanding and termination of 3.5 Core 150 sq mm AYFY (150 Sq

mm ALuminium armoured Cable). One Glanding and termination shall

include one end of cable glanding and termination of all cores of that

cable. Supply of double compression cable glans and aluminium lugs

of reputed make are included in the scope

EA 20 0.00

169

Cable Glanding and termination of 3.5 Core 70 sq mm AYFY (70 Sq





EA 24 0.00

170

Cable Glanding and termination of 4 Core 16 sq mm AYFY (16 Sq mm

ALuminium armoured Cable). One Glanding and termination shall




EA 75 0.00

171

Cable Glanding and termination of 4 Core 10 sq mm AYFY (10 Sq mm

ALuminium armoured Cable). One Glanding and termination shall




EA 50 0.00

172

Cable Glanding and termination of 3 Core 2.5 sq mm AYFY (2.5 Sq





EA 28 0.00

CABLING WORKS

173

SUPPLY OF FOLLOWING PVC / XLPE FRLS POWER CABLE 1.1 KV

GRADE AS PER 1554 - PART1 & 2 ACCEPTABLE MAKE: HAVELLS

/ FINOLEX OR EQUIVALENT

173A 3.5 Core, 150 Sq mm AYFY (Armoured Aluminium) M 400 0.00

173B 3.5 Core, 70 Sq mm AYFY (Armoured Aluminium) M 400 0.00

173C 4 Core, 16 Sq mm AYFY (Armoured Aluminium) M 400 0.00

173D 4 Core, 10 Sq mm AYY (Unarmoured Aluminium) M 400 0.00

173E 3 Core, 6 Sq mm AYY (Unarmoured Aluminium) M 400 0.00

173F 3 Core, 2.5 Sq mm AYFY (Armoured Aluminium) M 400 0.00













(Rs.)TOTAL (Rs.)

174SINGLE CORE (SIZE 36/.3) UNSHEATHED HALOGEN FREE FLAME

RETARDANT INSULATED CABLES IN VOLTAGE GRADE UPTO

1100V

M 360 0.00

175Supply & Installation of cable markers including painting,

nomenicleture and related civil works . EA 50 0.00

176

Excavation of trenches for laying power cable, supply and laying of

bricks, sand etc. and back filling. Minimum depth of buried cable trench

shall be 750 mm. The depth and width of the trench shall vary

depending upon the number of layers of cables. Before cables are

placed, the trenches bottom shall be filled with a layer of sand. This

sand shall be leveled and cables laid over it. These cables shall be

covered with 150 mm of sand on top of the cable and sand shall be

lightly pressed. A protective covering of 75 mm thick second class red

bricks shall be laid flat. The remainder of the trench shall then be back-

filled with soil, rammed and leveled.

As each row of cables is laid in place and before covering with sand

,every cable shall be given an insulation test in the presence of EIC.

Any cable which proves defective shall be replaced. One run of cable

laying is included in the excavation charges

M 1000 0.00

177

PREPAINTED MS LADDER TYPE CABLE TRAYS :- Supply &

erection of size 300 mm wide X 62.5 mm depth X 2 mm thick with

perforations not more than 17.5% without cover. The Quoted price of

cable tray items shall inclusive of Elbow,cross,tee, bend ,coupler

plate, harwares etc.

M 50 0.00

178

PREPAINTED MS LADDER TYPE CABLE TRAYS :- Supply &

erection of size 450 mm wide X 62.5 mm depth X 2 mm thick with

perforations not more than 17.5% without cover. The Quoted price of

cable tray items shall inclusive of Elbow,cross,tee, bend ,coupler

plate, harwares etc.

M 50 0.00

179supply of collapsable type aluminium ladder with wheels, 30 feet height

as per IS standardEA 1 0.00

180

GATE LIGHTS-Supply,Erection, testing and commissioning of 600mm

long G.I Pole of Suitable dia grouted on the Compound Gate wall

suitable for mounting post top lanterns as gate lights. The cost shall

also inclusive of internal wiring from the lamp to the switch box,

weather proof switch box embedded in wall consist of 6A SP

MCB,With terminal connector for loop-in, Loop-out connector along

with provision for entry of 4C x 2.5 Sq.mm flexible cable to the switch

box and all other accessories complete as required.

EA 2 0.00

181

Supply,Erection testing and commissioning of 2X18 W CFL luminaries

with lamp, control gear etc. complete as required (MAKE:-Bajaj:

BJCPT1 218 Clear). EA 2 0.00

PART F- LAN AND TP













(Rs.)TOTAL (Rs.)

182

ARMOURED TELEPHONE CABLES CABLES :- Supply, laying &

Testing of polythene insulated (ASTM D –1248 Type II, Class A),

polythene sheathed( as per BS: 6234), galvanized steel armoured (IS:

3975) , annealed high conductivity copper conductor (IEC- 28 or IS-

12444) of diameter 0.63 mm telephone cables confirming to TEC

Specification No. GR/CUG – 01/03 AUG 2003 with latest amendment.

The method of laying Telephone cables shall be run in a separate

trench at least 600 mm away from power cables. The civil works for

excavation will be included under heading "Civil Works for Outdoor

Cable Laying This quoted rate shall include cable end terminations by

using kits cable glands cable lugs etc as required complete. (MAKE:

Finolex, Havells , Delton)

182A2 Pair annealed copper conductor dia 0.63 sq mm cable for indoor

use. M 800 0.00

182B5 Pair annealed copper conductor dia 0.63 sq mm cable for indoor

use. M 800 0.00

182C10 Pair annealed copper conductor dia 0.63 sq mm armoured cable.

M 100 0.00

182D20 Pair Armoured annealed copper conductor dia 0.63 sq mm

armoured cable. M 100 0.00

182E50 Pair Armoured annealed copper conductor dia 0.63 sq mm

armoured cable. M 500 0.00

182FCAT 6 UTP LSZH cable for extending LAN/WAN confirming

ANSI/TIA/EIA 568-B.2M 700 0.00

183

Supply and installation of 10 pair krone connectors (out door type)

ordinary terminal box with including krone connectors ,locking

arrangements etc..( Make:- krone). EA 10 0.00

184Supply and installation of 20 pair krone connectors (out door type)


arrangements etc..( Make:- krone).

EA 2 0.00

185Supply and installation of 50 pair krone connectors (out door type)


arrangements etc..( Make :- krone).

EA 4 0.00

GRAND TOTAL 0.00

SERVICE TAX @ 4.944% 0.00

TOTAL INCLUDING SERVICE TAX 0.00

BIDDER/ FIRM NAME

PLACE AND DATE

NAME AND DESIGNATION OF AUTHORIZED

SIGNATORY

CHANGE IN RATE OF SERVICE TAX SHALL BE PAID/DEDUCTED AS PER CLAUSE 19 OF SCC

heads and service tax

the work shall be awarded to overall lowest bidder, i.e. total amount adding all the sub-
















(Rs.)TOTAL (Rs.)


SEC-IX SCHEDULE OF RATES UJJAIN...

Documents

Transcript of SEC-IX SCHEDULE OF RATES UJJAIN...