Seat Frame Raw materials for Seat Trim & Child Safety … Index g/10min ASTM D1238 50 Tensile...

NO.：2.01. A01.4A

Products Specifications:

Contact Information: Formosa Chemicals & Fibre Corporation Plastics Div. 2nd Sales Dept.TEL: 886-2-27178355 FAX: 886-2-27131649ADD.: 2F.,No. 201, Tung Hwa N. Road, Songshan Dist., Taipei City 10508 ,Taiwan(R.O.C)E-mail: [email protected]

Seat Frame–

Raw materials for Seat Trim & Child Safety Seat FramePP Resins(FCFC)

Product Features and Benefits:FCFC has exhibited the technical know-how of the Chisso gas-phase process to develop a number of high value- added impact copolymers into compound materials and supply them to the auto industry.

A. FCFC’s PP has received: (1) ISO 9001 &14001, (2) OHSAS 18001, and (3) environmental protection certification.

B. FCFC’s PP has obtained the certification of: (1) FDA, (2) UL 94 HB, (3) RoHS, (4) REACH SVHC, and (5) PAHS.

Processing Methods: Design for injection molding.

Comparison of FCFC PP K8009 with Typical Competitor:

98

>200>200

8078

6012

110100

11,0009,500

FCFC PP K8009 Typical Competitor

MI (g/10min)

Tensile Elongation at Break(%)

Flexural Modulus (kgf/cm2)

Hardness (R-Scale)

Izod Impact Strength(Kgf-cm/cm)

HDT (℃ )

Type Impact CopolymerGrade K7005 K7025 K8003 K8009

CharacteristicsHigh impact

strength, High rigidity

High fluidity, High rigidity, Good

impact strength

High impact strength, High

rigidity

High impact strength, High

fluidity Applications Composite materials, Seat trims

Properties Unit Method Typical Value Melt Index g/10min ASTM D1238 5 25 3 9Tensile Strength at Yield kgf/cm2 ASTM D638 270 270 260 230Tensile Elongation at Break % ASTM D638 >200 >200 >200 >200Flexural Modulus kgf/cm2 ASTM D790A 14,000 14,000 11,000 11,000Hardness R-scale ASTM D785 93 93 80 80IZOD Impact Strength kgf-cm/cm 23℃ ASTM D256 NB >45 8 NB >45 NB >45HDT ℃ ASTM D648 120 120 110 110

II-8

NO.：2.02.A01.4A


PP Resins(FCFC)Product Features and Benefits:FCFC has exhibited the technical know-how of the Chisso gas-phase process to develop a number of high value- added impact copolymers into compound materials and supply them to the auto industry. K8050 features the advantageous properties of super high fluidity, can easily be injection molded, and has high rigidity, anti-warping and good fluidity to ease injection of plastic pallets to reduce the surface flow mark phenomenon.

A. FCFC’s PP has received: (1) ISO 9001 & 14001 (2) OHSAS 18001 (3) environmental protection certification.B. K8050 has obtained the certification of: (1) FDA (2) UL 94 HB (3) RoHS 4) REACH SVHC (5) PAHS.


Contact Information: Formosa Chemicals & Fibre Corporation Plastics Div. 2nd Sales Dept.TEL: 886-2-27178355 FAX: 886-2-27131649ADD.: 2F.,No. 201, Tung Hwa N. Road, Songshan Dist., Taipei City 10508, Taiwan(R.O.C)E-mail: [email protected]

Type Impact CopolymerGrade K8050

Characteristics Super high fluidity, High rigidityApplications Composite materials, Instrument panel, Central console trims

Properties Unit Test Method Typical ValueMelt Index g/10min ASTM D1238 50Tensile Strength at Yield kgf/cm2 ASTM D638 240Tensile Elongation atBreak % ASTM D638 ＞ 100

Flexural Modulus kgf/cm2 ASTM D790A 12,500Hardness R-Scale ASTM D785 85IZOD impact Strength kgf- cm/cm 23℃ ASTM D256 10HDT ℃ ASTM D648 115

Raw materials for

Instrument Panel & Central Console Trim

II-58

NO.：2.05.A01.4A


PP Resins(FCFC)Product Features and Benefits:FCFC has exhibited the technical know-how of the Chisso gas-phase process to develop a number of high value- added impact copolymers into compound materials and supply them to the auto industry. K8050 features the advantageous properties of super high fluidity, can easily be injection molded, and has high rigidity, anti-warping and good fluidity to ease injection of plastic pallets to reduce the surface flow mark phenomenon.

A. FCFC’s PP has received: (1) ISO 9001 & 14001 (2) OHSAS 18001 (3) environmental protection certification.B. K8050 has obtained the certification of: (1) FDA (2) UL 94 HB (3) RoHS (4) REACH SVHC (5) PAHS.



Characteristics Super high fluidity, High rigidityApplications Composite materials, A/B/C pillars

Properties Unit Test Method Typical ValueMelt Index g/10min ASTM D1238 50Tensile Strength at Yield kgf/cm2 ASTM D638 240Tensile Elongation at Break % ASTM D638 ＞ 100Flexural Modulus kgf/cm2 ASTM D790A 12,500Hardness R-Scale ASTM D785 85IZOD impact Strength kgf-cm/cm 23℃ ASTM D256 10HDT ℃ ASTM D648 115

Contact Information: Formosa Chemicals & Fibre Corporation Plastics Div. 2nd Sales Dept.TEL: 886-2-27178355 FAX: 886-2-27131649ADD.: 2F.,No. 201, Tung Hwa N. Road, Songshan Dist., Taipei City 10508 ,Taiwan(R.O.C)E-mail: [email protected]

Raw materials for Car Pillar Trim (A/ B/ C Pillars)

II-100

NO.：2.07.A01.4A


PP Resins(FCFC)

Product Features and Benefits:FCFC has exhibited the technical know-how of the Chisso gas-phase process to develop a number of high value- added impact copolymers into compound materials and supply them to the auto industry. K8050 features the properties of anti-warping, surface flatness, good fluidity, easy injection molding of large objects, energy saving, and good protection for the molds.

A. FCFC’s PP has received: (1) ISO 9001 & 14001 (2) OHSAS 18001 (3) environmental protection certification.B. K8050 has obtained the certification of: (1) FDA (2) UL 94 HB (3) RoHS 4) REACH SVHC (5) PAHS.



Characteristics Super high fluidity, High rigidityApplications Composite materials, Door trim

Properties Unit Test Method Typical ValueMelt Index g/10min ASTM D1238 50Tensile Strength at Yield kgf/cm2 ASTM D638 240Tensile Elongation atBreak % ASTM D638 ＞ 100

Flexural Modulus kgf/cm2 ASTM D790A 12,500Hardness R-Scale ASTM D785 85IZOD Impact Strength kgf-cm/cm 23℃ ASTM D256 10HDT ℃ ASTM D648 115


Raw materials for Door Trim

II-116

NO.：3.03.A01.4A

8078

6012

110100

98

FCFC PP T8002 Typical Competitor

1.01.8

8051

105102

270265

>200>200

11,00010,500

Raw materials for Cooling FanPP Resins(FCFC)

Product Features and Benefits:FCFC has exhibited the technical know-how of the Chisso gas-phase process to develop a number of high value- added impact copolymers into compound materials and supply them to the auto industry.A. FCFC’s PP has received : (1) ISO 9001 &14001 (2) OHSAS 18001 (3) environmental protection certification.B. T8002 has obtained certification from: (1) FDA (2) UL 94 HB (3) RoHS (4) REACH SVHC (5) PAHS.

Processing Methods: Design for extrusion molding.

Comparison of FCFC PP T8002 with Typical Competitor:

Products Specifications:Type Impact CopolymerGrade T8002

Characteristics Excellent impact strength, Low melt flow index (MI)Applications Composite materials, Cooling fans

Properties Unit Test Method Typical ValueMelt Index g/10min ASTM D1238 1.0Tensile Strength at Yield kgf/cm2 ASTM D638 270Tensile Elongation at Break % ASTM D638 ＞ 200Flexural Modulus kgf/cm2 ASTM D790A 11,000Hardness R-Scale ASTM D785 80IZOD Impact Strength kgf-cm/cm 23 ASTM D256 80HDT ℃ ASTM D648 105

Contact Information: Formosa Chemicals & Fibre Corporation Plastics Div. 2nd Sales Dept.TEL: 886-2-27178355 FAX: 886-2-27131649ADD.: 2F.,No.201, Tung Hwa N. Road, Songshan Dist., Taipei City 10508 ,Taiwan(R.O.C)E-mail: [email protected]

MI (g/10min)

Tensile strength at Yield (kgf/cm2)


Flexural Modulus(kgf/cm2)

IZOD Impact Strength(kgf.cm/cm)

HDT (℃ )

Advantage: The impact strength of T8002 is superior to other manufacturers in the industry.

III-22

NO.：3.06.A01.4A

11,0009,500

>200>200

8078

6012

110100

98

FCFC PP B8001 Typical Competitor

0.31.3

8255

105105

270250

>200>200

11,00011,250


PP Resins(FCFC)

Product Features and Benefits:FCFC has exhibited the technical know-how of the Chisso gas-phase process to develop a number of high value- added impact copolymers into compound materials and supply them to the auto industry. B8001 features the advantageous properties of low fluidity, can be easily blow molded, and has high impact strength and low temperature brittleness resistance.A. FCFC’s PP has received: (1) ISO 9001 & 14001 (2) OHSAS 18001 (3) environmental protection certification.B. B8001 has obtained certification fromf: (1) FDA (2) UL 94 HB (3) RoHS 4) REACH SVHC (5) PAHS.

Processing Methods: Design for blow molding.

Comparison of FCFC PP B8001 with Typical Competitor:

Contact Information: Formosa Chemicals & Fibre Corporation Plastics Div. 2nd Sales Dept.TEL: 886-2-27178355 FAX: 886-2-27131649ADD.: 2F., No. 201, Tung Hwa N. Road, Songshan Dist., Taipei City 10508, Taiwan(R.O.C)E-mail: [email protected]

Type Impact CopolymerGrade B8001

Characteristics Excellent impact strength, Low melt flow index (MI)Applications Composite materials, Coolant reservoir, Brake oil reservoir

Properties Unit Test Method Typical ValueMelt Index g/10min ASTM D1238 0.3Tensile Strength at Yield kg/cm2 ASTM D638 270Tensile Elongation at Break % ASTM D638 ＞ 200Flexural Modulus kgf/cm2 ASTM D790A 11,000Hardness R-Scale ASTM D785 80IZOD impact Strength kg-cm/cm 23℃ ASTM D256 82HDT ℃ ASTM D-648 105

Raw materials for

Coolant Reservoir & Brake Oil Reservoir

Advantage: B8001 features the properties of low MI, high melt strength, non-dripping during blow molding, and easy thickness control.

MI (g/10 min)

Tensile strength at Yield (kgf/cm2)



IZOD impact Strength(kgf.cm/c m)

HDT (℃ )

III-44

NO.：3.07.A01.4A

8078

6012

110100

98

台化 PP T8002 Typical Competitor

1.01.8

8051

105102

270265

>200>200

11,00010,500

PP Resins(FCFC)

Product Features and Benefits:FCFC has exhibited the technical know-how of the Chisso gas-phase process to develop a number of high value- added impact copolymers into compound materials and supply them to the auto industry. A. FCFC’s PP has received : (1) ISO 9001 &14001 (2) OHSAS 18001 (3) environmental protection certification.B. T8002 has obtained certification from: (1) FDA (2) UL 94 HB (3) RoHS (4) REACH SVHC (5) PAHS.

Processing Methods: Design for extrusion molding.

Comparison of FCFC PP T8002 with Typical Competitor:

Products Specifications:Type Impact CopolymerGrade T8002

Characteristics Excellent impact strength, low melt flow index (MI)Applications Composite materials, Wire Corrugated Pipe

Properties Unit Test Method Typical ValueMelt Index g/10min ASTM D1238 1.0Tensile Strength at Yield kgf/cm2 ASTM D638 270Tensile Elongation at Break % ASTM D638 ＞ 200Flexural Modulus kgf/cm2 ASTM D790A 11,000Hardness R-Scale ASTM D785 80IZOD Impact Strength kgf-cm/cm 23℃ ASTM D256 80HDT ℃ ASTM D648 105

Contact Information: Formosa Chemicals & Fibre Corporation Plastics Div. 2nd Sales Dept.TEL: 886-2-27178355 FAX: 886-2-27131649ADD.: 2F., No. 201, Tung Hwa N. Road, Songshan Dist., Taipei City 10508 ,Taiwan(R.OC)E-mail: [email protected]

MI (g/10min)

Tensile strength at Yield(kgf/cm2)




HDT (℃ )

Advantage: The impact strength and heat distortion temperature (HDT) of T8002 is superior to other manufacturers in the industry.

Raw materials for Wire Corrugated Pipe

III-62

NO.：3.08.A01.4A

Contact Information: Formosa Chemicals & Fibre Corporation Plastics Div. 2nd Sales Dept.TEL: 886-2-27178355 FAX: 886-2-27131649ADD.: 2F., No.201, Tung Hwa N. Road, Songshan Dist., Taipei City 10508,Taiwan(R.O.C)E-mail: [email protected]

PP Resins (FCFC)

Product Features and Benefits:FCFC has exhibited the technical know-how of the Chisso gas-phase process to develop a number of high value- added impact copolymers into compound materials and supply them to the auto industry. K8009 features the properties of good fluidity, high impact strength, acid/alkali resistance,etc.

A. FCFC’s PP has received: (1) ISO 9001 & 14001 (2) OHSAS 18001 (3) environmental protection certification.B.K8009 has obtained the certification of: (1) FDA (2) UL 94 HB (3) RoHS 4) REACH SVHC (5) PAHS.


Products Specifications:Type Impact CopolymerGrade K8009

Characteristics High impact strength, Acid/ alkali resistanceApplications Battery Casing & Housing

Properties Unit Test Method Typical ValueMelt Index g/10min ASTM D1238 9Tensile Strength at Yield kgf/cm2 ASTM D638 230Tensile Elongation at Break % ASTM D638 ＞ 200Flexural Modulus kgf/cm2 ASTM D790A 11,000Hardness R-Scale ASTM D785 80IZOD Impact Strength kgf-cm/cm 23℃ ASTM D256 NB > 45HDT ℃ ASTM D648 110

Raw materials for Battery Casing & Housing

III-72

MI (g/10min)

Tensile Strength at Yield (kgf/cm2)



Izod Impact Strength(Kgf-cm/cm)

HDT (℃ )


1717

5651

9897

210205

>200>200

9,2969,535

Advantage: The impact strength of K9017 is superior to other manufacturers in the industry.

Contact Information: Formosa Chemicals & Fibre Corporation Plastics Div. 2nd Sales Dept.TEL: 886-2-27178355 FAX: 886-2-27131649ADD.: 2F., No. 201, Tung Hwa N. Road, Songshan Dist., Taipei City 10508,Taiwan(R.O.C)E-mail: [email protected]

Raw materials for Bumper PP Resins (FCFC)Product Features and Benefits:FCFC has exhibited the technical know-how of the Chisso gas-phase process to develop a number of high value- added impact copolymers into compound materials and supply them to the auto industry. K9017 features excellent impact strength, such as high impact strength at room temperature and impact resistance at low temperature, as well as anti-UV, low specific gravity, and lightweight properties.

A. FCFC’s PP has received: (1) ISO 9001 & 14001, (2) OHSAS 18001, and (3) environmental protection certification.B. K9017 has obtained the certification of: (1) FDA, (2) UL 94 HB, (3) RoHS, (4) REACH SVHC, and (5)PAHS.

Processing Methods: Design for injection molding.Comparison of FCFC PP K9017 with Typical Competitor:

NO.：1.01.A01.4A


Characteristics High fluidity, Anti-UV, High impact strengthApplications Composite materials, Bumpers, Mudguards, Wheel arch trims

Properties Unit Test Method Typical ValueMelt Index g/10min ASTM D1238 17Tensile Strength at Yield kg/cm2 ASTM D638 210Tensile Elongation at Break % ASTM D638 ＞ 200Flexural Modulus kgf/cm2 ASTM D790A 9,296Hardness R-Scale ASTM D785 76IZOD Impact Strength kgf-cm/cm 23℃ ASTM D256 56HDT ℃ ASTM D648 98


I-8

NO.：1.02.A01.4A

Raw materials for MudguardPP Resins (FCFC)Product Features and Benefits:FCFC has exhibited the technical know-how of the Chisso gas-phase process to develop a number of high value- added impact copolymers into compound materials and supply them to the auto industry. K9017 features excellent impact strength, such as high impact strength at room temperature and impact resistance at low temperature, as well as anti-UV, low specific gravity, and lightweight properties.A. FCFC’s PP has received : (1) ISO 9001 & 14001, (2) OHSAS 18001, and (3) environmental protection certification.B. K9017 has obtained certification from: (1) FDA, (2) UL 94 HB, (3) RoHS, (4) REACH SVHC, and (5) PAHS.



MI (g/10min)





HDT (℃ )


1717

210205

9,2969,535

5651

9897

>200>200



Characteristics High fluidity, Anti-UV, High impact strength

Applications Composite materials, Bumpers, Mudguards, Wheel arch trims

Properties Unit Test Method Typical ValueMelt Index g/10min ASTM D1238 17Tensile Strength at Yield kgf/cm2 ASTM D638 210Tensile Elongation at Break % ASTM D638 ＞ 200Flexural Modulus kgf/cm2 ASTM D790A 9,296Hardness R-scale ASTM D785 76IZOD Impact Strength kgf-cm/cm 23℃ ASTM D256 56HDT ℃ ASTM D648 98

Contact Information: Formosa Chemicals & Fibre Corporation Plastics Div. 2nd Sales Dept.TEL: 886-2-27178355 FAX: 886-2-27131649ADD.: 2F., No.201, Tung Hwa N. Road, Songshan Dist., Taipei City 10508 ,Taiwan(R.O.C)E-mail: [email protected]

I-18

NO.：1.03.A01.4A

MI (g/10min)





HDT (℃ )


1717

210205

9,2969,535

5651

9897

>200>200

Raw materials for Wheel Arch TrimPP Resins(FCFC)Product Features and Benefits:FCFC has exhibited the technical know-how of the Chisso gas-phase process to develop a number of high value- added impact copolymers into compound materials and supply them to the auto industry. K9017 features excellent impact strength, such as high impact strength at room temperature and impact resistance at low temperature, as well as anti-UV, low specific gravity, and lightweight properties.A. FCFC’s PP has received: (1) ISO 9001 & 14001, (2) OHSAS 18001, and (3) environmental protection certification.B. K9017 has obtaºined certification from: (1) FDA, (2) UL 94 HB, (3) RoHS, (4) REACH SVHC, and (5) PAHS.





Characteristics High fluidity, Anti-UV, High impact strength

Applications Composite materials, Bumpers, Mudguards, Wheel arch trims

Properties Unit Test Method Typical ValueMelt Index g/10min ASTM D1238 17Tensile Strength at Yield kgf/cm2 ASTM D638 210Tensile Elongation at Break % ASTM D638 ＞ 200Flexural Modulus kgf/cm2 ASTM D790A 9,296Hardness R-scale ASTM D785 76IZOD Impact Strength kgf-cm/cm 23℃ ASTM D256 56HDT ℃ ASTM D648 98


I-28

NO.：1.04.A01.4A


55

>200>200

14,00013,156

6015.4

120118

9390

270265

Raw materials for Rearview Mirror HousingPP Resins (FCFC)Product Features and Benefits:FCFC has exhibited the technical know-how of the Chisso gas-phase process to develop a number of high value- added impact copolymers into compound materials and supply them to the auto industry. K9017 features excellent impact strength, such as high impact strength at room temperature and impact resistance at low temperature, as well as anti-UV, low specific gravity, and lightweight properties.A. FCFC’s PP has received: (1) ISO 9001 & 14001, (2) OHSAS 18001, and (3) environmental protection certification.B. K7005 has obtained certification from: (1) FDA, (2) UL 94 HB, (3) RoHS, (4) REACH SVHC, and (5) PAHS.


Products Specifications:Type Impact CopolymerGrade K7005

Characteristics High impact strength, High rigidityApplications Composite materials,Rearview mirror housings

Properties Unit Test Method Typical ValueMelt Index g/10min ASTM D1238 5Tensile Strength at Yield kgf/cm2 ASTM D638 270Tensile Elongation at Break % ASTM D638 ＞ 200Flexural Modulus kfg/cm2 ASTM D790A 14,000Hardness R-Scale ASTM D785 93IZOD Impact Strength kgf-cm/cm 23℃ ASTM D256 N.B >45HDT ℃ ASTM D648 120

Contact Information: Formosa Chemicals & Fibre Corporation Plastics Div. 2nd Sales Dept.TEL: 886-2-27178355 FAX: 886-2-27131649ADD.: 2F.,No.201, Tung Hwa N. Road, Songshan Dist., Taipei City 10508,Taiwan(R.O.C)E-mail: [email protected]

MI (g/10min)




Hardness (R-Scale)


HDT (℃ )


I-36

NO.：1.05.A01.4A


55

>200>200

14,00013,156

6015.4

120118

9390

270265


Characteristics High impact strength, High rigidityApplications Composite materials, Headlight base

Properties Unit Test Method Typical ValueMelt Index g/10min ASTM D1238 5Tensile Strength at Yield kgf/cm2 ASTM D638 270Tensile Elongation at Break % ASTM D638 ＞ 200Flexural Modulus kgf/cm2 ASTM D790A 14,000Hardness R-Scale ASTM D785 93IZOD Impact Strength kgf-cm/cm 23℃ ASTM D256 60HDT ℃ ASTM D648 120

Raw materials for Headlight BasePP Resins (FCFC) Product Features and Benefits:FCFC has exhibited the technical know-how of the Chisso gas-phase process to develop a number of high value- added impact copolymers into compound materials and supply them to the auto industry. K9017 features excellent impact strength, such as high impact strength at room temperature and impact resistance at low temperature, as well as anti-UV, low specific gravity, and lightweight properties.A. FCFC’s PP has received: (1) ISO 9001 &14001, (2) OHSAS 18001, and (3) environmental protection certification.B. K9017 has obtained certification from: (1) FDA, (2) UL 94 HB, (3) RoHS, (4) REACH SVHC, and (5) PAHS.



Contact Information: Formosa Chemicals & Fibre Corporation Plastics Div. 2nd Sales Dept.TEL: 886-2-27178355 FAX: 886-2-27131649ADD.: 2F.,No. 201, Tung Hwa N. Road, Songshan Dist., Taipei City 10508,Taiwan(R.O.C)E-mail: [email protected]

Advantage: The impact resistance property of K7005 is superior to other manufacturers in the industry.

MI (g/10min)


Tensile Elongation at Break (%)


Hardness (R-Scale)


HDT (℃ )

I-52

Seat Frame Raw materials for Seat Trim & Child Safety … Index g/10min ASTM D1238 50 Tensile...

Documents

Transcript of Seat Frame Raw materials for Seat Trim & Child Safety … Index g/10min ASTM D1238 50 Tensile...