searox Ps 620 alu - Marine & offshore insulation searox 04...

4
SEAROX 04/2014 SEAROX PS 620 ALU - MARINE & OFFSHORE INSULATION SeaRox Marine & Offshore Insulation SeaRox PS 620 ALU Regulated fire protection of sprinkler pipes

Transcript of searox Ps 620 alu - Marine & offshore insulation searox 04...

Page 1: searox Ps 620 alu - Marine & offshore insulation searox 04 ...static.rockwool.com/globalassets/rti/downloads/industrial... · searox Ps 620 alu - Marine & offshore insulation searox

3B-R

ekla

me

• 04

14

®

searox 04/2014searox Ps 620 alu - Marine & offshore insulation

SeaRoxMarine & OffshoreInsulation

SeaRox PS 620 ALURegulated fire protection of sprinkler pipes

Page 2: searox Ps 620 alu - Marine & offshore insulation searox 04 ...static.rockwool.com/globalassets/rti/downloads/industrial... · searox Ps 620 alu - Marine & offshore insulation searox

2

Fire protection of sprinkler pipes on passenger ships

The solution secures the following advantages:

Fire protection of steel pipes as required by IMO MSC Resolution MSC 216(82).

Standard Pipe Section also for fire protection - basis product tested and approved for A-60.

Easy assortment and installation.

new amendment to solas regulation about protection of sprinkler pipes on passenger vessels

Seen in the light of the increasing sizes of passenger ships and growing number of passengers, a new amendment to SOLAS regulation „Safe return to port“ is applicable to all passenger ships built on or after 1st July 2010 stating that sprinkler pipes on passenger vessels need to remain operational in case of fire.

The amendment is valid for:

All passenger ships of 120 m or more, or Having three or more main vertical zones

Applicable also for ROPAX vessels and offshore accommodations

Wet steel pipes passing through and not serving spaces affected by fire casualty are considered to remain operational provided either:

They are of substantial thickness, or A-60 insulated

Safe return to portRegulation 21.4Wet steel pipes carrying water based liquids and passing through and not serving

spaces affected by a fire casualty are considered to remain operational, provided

they are of substantial thickness (ref. ICLL 66 Reg. 22(3) as interpreted by IACS

UI LL36/Rev.1 paragraph (b)) or insulated to class A-60 and fully welded.

If provided with fittings, they are to be tested according to IACS UR P2.11.5.5.6

fire test.

ROCkWOOL Technical Insulation offers the solution: SeaRox PS 620 ALU

To fulfil the requirement ROckwOOL Technical Insulation offers a specially developed Pipe Section, SeaRox PS 620 ALU. This product may be used not only for thermal insulation but also for fire protection according to IMO FTP code. By using the already A-60 approved basis product, SeaRox SL 620 in approved thickness for Bulkhead and Deck, just cut into Pipe Sections the product is fulfilling the requirements.

Page 3: searox Ps 620 alu - Marine & offshore insulation searox 04 ...static.rockwool.com/globalassets/rti/downloads/industrial... · searox Ps 620 alu - Marine & offshore insulation searox

Installation and product assortment

3

Note SeaRox PS 620 ALU is as standard delivered with reinforced alu foil and self-adhesive tape.

Inner diameter (pipe diameter)

Insulation thickness for horisontal piping

Pck/ pack

mm inch mm

22 1/2 40 13

35 1 40 9

48 1 1/2 40 8

60 2 40 6

Product assortment

the fiberglass reinforced aluminium faced Pipe section is cut along one side to allow easy assembly around a pipe. this enables the Pipe section to be moved into place around the pipe. Joint of Pipe section to be placed downwards.

Close the gap between the Pipe sections with the roCkwool alu tape. ensure the area to be taped is dry, free of dust and grease.

Before closing the Pipe section, using the adhesive tape the section must be pushed into place against the previous section. remove the tape strip and close the Pipe section ensuring all gaps are closed.

the Pipe section should be secured with a galvanized or stainless steel wire. recommendation: 3 circles pr. m.

1

3

2

4

Page 4: searox Ps 620 alu - Marine & offshore insulation searox 04 ...static.rockwool.com/globalassets/rti/downloads/industrial... · searox Ps 620 alu - Marine & offshore insulation searox

3B-R

ekla

me

• 04

14ROCkWOOL Technical Insulation

Hovedgaden 501

2640 Hedehusene

Denmark

Tel: (+45) 46 56 16 16

Fax: (+45) 46 56 16 04

www.rockwool-rti.com

[email protected]

ROckwOOL Technical Insulation

is part of ROckwOOL International A/S

ROckwOOL Technical Insulation, an independent organisationof the international ROckwOOL Group, is the world widemarket leader in technical insulation. with our two productlines, ProRox and SeaRox, we cover the whole industrialmarket and marine & offshore industry, providing a full rangeof products and systems for the thermal and firesafeinsulation of technical applications. Besides sustainableproducts we offer reliable expert advice, from documentationto delivery and after sales service. Throughout the whole chainfrom specifier, through dealer to contractor and installer weaim to add value. we don’t just sell products, we supplysolutions. It’s this total approach that makes us the idealchoice for professionalism, innovation and trust.

All explanations correspond to our current range of knowledge and are therefore up-to-date. The examples of use outlined in this document serve only to provide a better description and do not take special circumstances of specific cases into account. ROckwOOL Technical Insulation places great value upon continuous development of products, to the extent that we too continuously work to improve our products without prior notice. we therefore recommend that you use the most recent edition of our publications, as our wealth of experience and knowledge is always growing. Should you require related information for your specific application or have any technical queries, please contact our sales department or visit our website www.rockwool-rti.com

The ROckwOOL Group is the world’s leading supplier of innovative products and systems based on stone wool, improving the environment and the quality of life for millions of people. The Group is one of the global leaders in the insulation industry with products and solutions for all major application areas for both residential and non-residential buildings. Together with other construction-related products, such as acoustic ceilings and cladding boards, the Group ensures energy efficient and fire safe buildings with good acoustics and a comfortable indoor climate. we also create green solutions for the horticultural industry, special fibres forindustrial use, effective insulation for the process industryand marine & offshore as well as noise and vibration systemsfor modern infrastructure.

Our more than 10,500 employees in more than 30 countries cater for customers all over the world. The Group’s head office is located close to copenhagen. In 2013 the Group generated sales of almost 2 billion EUR. The company is listed on the NASDAQ OMX Nordic Exchange copenhagen. The Group’s operations have a main presence in Europe and we are expanding production, sales and service activities in Russia, North America. Together with a broad network of business partners, this ensures that the Group’s products and systems reach almost every corner of the globe. For more information, please visit www.rockwool.com

ROckwOOL Technical Insulation

The ROckwOOL Group

ROckwOOL, SeaRox and ProRox are registered trademarks of ROckwOOL International.

ROckwOOL Technical Insulation reserves the right to change the information in this brochure

without prior notice.