Search - February 2013

148

description

‘SEARCH’, India’s leading B2B magazine on general engineering and manufacturing, is aimed to equip its readers with latest business trends, news, views and insights. A ready-reckoner for all techno-commercial information, it is a sumptuous source of business trends and growth opportunities. Encompassing all the segments of manufacturing along with sourcing solutions, this monthly presentation is a unique platform for SMEs as well. With multitude of dedicated readers patronising this flagship magazine, launched in 1998, SEARCH has retained the leadership position in its domain

Transcript of Search - February 2013

Page 1: Search - February 2013
Page 2: Search - February 2013
Page 3: Search - February 2013
Page 4: Search - February 2013
Page 5: Search - February 2013
Page 6: Search - February 2013
Page 7: Search - February 2013
Page 8: Search - February 2013
Page 9: Search - February 2013

s it time for Gujarat to gain the strategic shift from share taker to market maker...Does Pune Define or Defy industrial competitiveness? Can Chennai better the China model? Is Punjab Ready to Reclaim its Manufacturing Might? Is Indore the Next Big Investor’s Magnet? Your magazine is asking a lot of questions and it is going places…literally and figuratively!! The last few months were action-packed for SEARCH as we were present at all the important manufacturing hubs (as I write this piece, Aurangabad is waiting to be

visited) and what an experience it has been!! It was the most enriching and stands as a perfect example of creating value for the entire ecosystem.

Each of these regions, be it Gujarat (Ahmedabad); Pune; Chennai; Punjab (Ludhiana) or Madhya Pradesh (Indore), is raring to go. The manufacturing fraternity in each of these locals is brimming with prospects but is marred with problems as well. Each of these panel discussions comprised an eclectic mix of panelists including policymakers, industry stalwarts, academia, SME representatives, and a son of the soil success story … each representing an important aspect of the industry, each adding a voice and view to the discussion.

While we were able to enlighten and educate the audience, we were also able to motivate and pave the way for the industry to grow. These well-attended industry meets were not only about talks but about action as well, and now is the time to deliver the action.

As promised, we are presenting the report of our findings in each of the regions, which we covered in the last few months, to policymakers both at the Centre as well as state levels. The report consists of the summations and findings from each of the panel discussions along with action points for the government as well as the industry.

It is all about capturing the multifaceted growth landscape for manufacturing that we are dreaming about, demanding and gearing to deliver. This, incidentally, is also our cover shout for this edition of SEARCH. In this edition, we talk about critical aspects like safety and security, which the Indian manufacturing fraternity is slowly but surely waking up to, be it from the viewpoint of what it can do for their business as well as the kinds of business prospects it holds.

We also talk about how the competitiveness of SMEs can be enhanced and the ways and means towards achieving the same. This edition also marks the initiation of a very critical cause that we will be taking up in a big way going forward. The Green Shoots gets introduced in this edition. This is an initiative by Network18 and UNIDO-ICAMT (International Centre for the Advancement of Manufacturing Technology). As the name suggests, India is just about sprouting to the potential, prospects and profits that are part of the environment-friendly manufacturing practices. It is time for ‘green’ to earn ‘greens’!

IDelivering Promises

Archana Tiwari-Nayudu [email protected]

Page 10: Search - February 2013
Page 11: Search - February 2013

| Pg 56

CONTENTS

9 EDITORIAL Delivering Promises

SpeciAl FocuS: Safety & Security

SME TREnDS78 Prospects & Possibilities FY13: A Challenging Year For Indian MSMEs

According to the Indian Labour Organization (ILO), an estimated 1.2 million workers lose their lives annually due to work-related accidents and diseases. Further, 250 million occupational accidents and 160 million work-related diseases occur each year. The economic loss from these is estimated to be a whopping 4% of the world’s gross national product. Consequently, there is a huge demand for safety and security solutions not only in India but all across the globe. Further, industry experts claim that over the last five years, safety & security products have recorded 35% growth and the trend is expected to continue in India over the next 10–15 years.

nEWS, VIEWS & AnALYSIS36 Latest Happenings In The World Of Manufacturing

AuTOMATIOn TREnDS80 ‘Automation Is The Answer To India’s Quest For Being A World-class Industrial Competitor’ Naveen Kumar Mote, General Manager – India, Red Lion Controls

TIPS & TRICkS94 Industrial Robot Selection Guide 10 Good Reasons To Invest In Robots

95 TEnDERS

STRATEGY90 Group Collaboration Empowering Indian SMEs

GREEn MAnuFACTuRInG86 Addressing Energy Issues unlocking Energy Efficiency

88 use vs Manufacturing Where Does The (Green) Buck Stop?

Productivity Initiatives Tracking Awareness

Levels of SMEs

TECHnOLOGY & InnOVATIOnS42 Technology update Cutting-edge Solutions

iN coNverSATioN WiTh

‘India remains one of the largest hydrocarbon importers in the globe’ Mrinal Vohra, CEO – India, Bangladesh & Sri Lanka, GE Oil & Gas

pg 44

‘The defence manufacturing sector can create over one million jobs in the domestic market’ Jan Widerström, Chairman, Saab India Technologies Pvt Ltd

pg 50

‘Partnership, Precision and Pioneering hold the key for all R&D activities’

pg 52

Rainer klug, Member – Executive Board – Operations, Baumer Management Services AG

Shyam Warialani, MD, Baumer Technologies India Pvt Ltd

l Special Focus: Pollution Control l Insights & Outlook: Green Manufacturing

l Special Edition: Power

Page 12: Search - February 2013
Page 13: Search - February 2013

PRODuCT uPDATE96 General Products Rolling Out The Best In Class

EVEnT REPORT126 Engineering Expo Ludhiana 2012 Exploring A Horizon Of Opportunities

128 Panel Discussion: Ludhiana Is Punjab Ready To Reclaim Its Manufacturing Might?

129 Engineering Expo Indore 2013 Empowering SMEs, Expanding Market Reach

132 Export Competitiveness Of Gujarat - Vision 2020 FIEO Adds Exports’ Edge To Entrepreneurship Of Gujarat

131 Panel Discussion: Indore Is Indore The next Big Investor’s Magnet?

CuRTAIn RAISER134 Engineering Expo Aurangabad 2013 Leveraging Market Trends, Expanding Opportunities

124 EVEnTS’ LIST

Safety & SecuritySpeciAl FocuS

58 Innovation & Technologies The Road To Safety And Security

62 Industry Hazards Safety: A Remedial Measure

new Engineering Materials

producT updATe

coNTeNTSSpeciAlS iN ThiS iSSue

144 ADVERTISERS’ LIST Advertisers’ List In Chronological Order

136 PRODuCT InDEx Alphabetical Listing Of Products Presented In The Issue

iNSighTS & ouTlooK

68 new Engineering Discoveries Beckoning A new Era Of Advanced Materials Science

70 5 new Engineering Materials Slated To Bring About Transformation

74 Magic Materials Spending On Innovation Is The key

Looking For A Specific Product?Searching and sourcing products were never so easy.

Just type SRCH (space) Product Name and send it to 51818

eg. SRCH Pump and send it to 51818

Cover Illustration: Sanjay Dalvi

Page 14: Search - February 2013
Page 15: Search - February 2013

FOuNdEr & EdITOr, NETwOrk 18Raghav Bahl

PrESIdENT & EdITOrIAL dIrECTOr, TV 18Senthil Chengalvarayan

ExECuTIVE EdITOrArchana Tiwari-Nayudu

EdITOrIAL TEAmKimberley D’Mello, Raah Kapur, Nishi Rath, Prateek Sur, Arindam Ghosh (Delhi),

Suprita Anupam (Bengaluru), Avinash Pandey, Dharitri Dalvi, Rishab Kothari

ASSISTANT ArT dIrECTOrVaruna Naik

dESIgN TEAmSanjay Dalvi

ChIEF PhOTOgrAPhErMexy Xavier

PhOTOgrAPhyNeha Mithbawkar, Joshua Navalkar

buSINESS CONTrOLLErSLovey Fernandes, Akshata Rane, Shefali Mahant,

Deepak Bhatia, Ashish Kukreti, Shwetha ME, Jayashree N

PrINTINgExECuTIVE VICE PrESIdENT

Ananth R Iyer

ASSISTANT gENErAL mANAgEr - PPCShekhar Khot

PrOduCTION TEAmSurekha Karmarkar, Ravikumar Potdar

Ravi Salian, Sanjay Shelar

OVErSEAS CONTACTRingier Trade Media Ltd ChINA

1001 Tower 3, Donghai Plaza, 1486 Nanjing Road, West, Shanghai 200040, China Tel: +86-21 6289 – 5533 Ext. 368, Fax: +86-21 6247 – 4855

(Craig Shibinsky) Email: [email protected] Trade Media Ltd hONg kONg

9/F, Cheong Sun Tower, 118 Wing Lok Street, Sheung Wan, Hong Kong Tel: +852 2369 – 8788 Ext. 21, Fax: +852 2869 – 5919

(Octavia Au-Yeung) Email: [email protected] Trade Media Ltd TAIwAN

Room 3, Fl. 12, No. 303, Chung Ming S. Rd., Taichung, TaiwanTel: +886-4 2329 – 7318 Ext. 16, Fax: +886-4 2310 – 7167

(Sydney La) Email: [email protected] Trade Media Ltd gErmANy, AuSTrIA, SwITzErLANd

Tel: +41-44 734 0472, Fax: +41 44 734 0680Email: [email protected]

uSA Tel: (513) 527-8800 Fax: (513) 527-8801

Email: [email protected]

uSA Alfredo Domador, 6505 Blue Lagoon Drive, Suite 430 Miami, FL. 33126, USA

Tel: (305) 448-6875, Fax: (305) 448-9942

grOuP CEO, NETwOrk 18B Sai Kumar

CEO-NETwOrk 18 PubLIShINgSandeep Khosla

EVP-humAN rESOurCESSanjeev Kumar Singh

ASSOCIATE VICE PrESIdENTSudhanva Jategaonkar

AdVErTISINg SALESShashin Bhagat (Ahmedabad)[email protected] B (Bengaluru)[email protected] Hara Subramaniam (Chennai)[email protected] S (Coimbatore)[email protected] Yadav (Delhi)[email protected] Dsouza (Hyderabad)[email protected] Gokhale (Indore)[email protected] Arora (Jaipur)[email protected] Ghosal (Kolkata)[email protected] Dhingra (Ludhiana)[email protected] Dsouza (Mumbai)[email protected] Dass (Pune)[email protected] Modha (Rajkot)[email protected] Pathak (Vadodara)[email protected]

mArkETINg TEAmGanesh Mahale, Prachi Mutha, Akshaya Jadhav

NEwSSTANd ANd SubSCrIPTIONSdISTrIbuTION hEAdSunil Nair

dEPuTy gENErAL mANAgErManoj Palsay

SENIOr mANAgEr - SubSCrIPTIONSSheetal Kotawdekar

CO-OrdINATOrSRahul Mankar, Anant Shirke, Sarita Quadros,Chaitali Parkar, Kamlesh Mathkar, Vaibhav Ghavale

SErVICESSubSCrIPTION SErVICES For subscription queries, write [email protected] or call +91 22 30034631-34 or toll free 1800 200 1021PErmISSIONS For subscription to copy or reuse material from SEARCH,Write to [email protected]• Monthly Issue Price: ` 100 • Annual Subscription: ` 799

Views and opinions expressed in this magazine are not necessarily those of Network18 Media & Investments Ltd (Network18)*, its publisher and/or editors. We at Network18 do our best to verify the information published but do not take any responsibility for the absolute accuracy of the information. Network18 does not accept the responsibility for any investment or other decision taken by readers on the basis of information provided herein. Network18 does not take responsibility for returning unsolicited material sent without due postal stamps for return postage. No part of this magazine can be reproduced without the prior written permission of the publisher. Network18 reserves the right to use the information published herein in any manner whatsoever.

Publishing

Printed by Mohan Gajria and published by Lakshmi Narasimhan on behalf of Network18. Executive Editor: Archana Tiwari-Nayudu

Printed at Infomedia 18 Ltd, Plot no.3, Sector 7, off Sion-Panvel Road, Nerul, Navi Mumbai 400 706, and published at Network18, ‘A’ Wing, Ruby House, J K Sawant Marg, Dadar (W), Mumbai - 400 028.

SEARCH is registered with the Registrar of Newspapers of India under No. 67827/98. Network18 does not take any responsibility for loss or damage incurred or suffered by any subscriber of this magazine as a result of his/her accepting any invitation/offer published in this edition.

* ownership of this magazine stand transferred from Infomedia18 Limited (Infomedia18) to Network18 Media & Investments Limited (Network18) in pursuance of the scheme of arrangement between Network18 and Infomedia18 and their respective shareholders and creditors, as approved by the Hon’ble High Court of Delhi and the necessary approval of Ministry of Information and Broadcasting is being obtained.

Page 16: Search - February 2013
Page 17: Search - February 2013
Page 18: Search - February 2013
Page 19: Search - February 2013
Page 20: Search - February 2013
Page 21: Search - February 2013
Page 22: Search - February 2013
Page 23: Search - February 2013
Page 24: Search - February 2013
Page 25: Search - February 2013
Page 26: Search - February 2013
Page 27: Search - February 2013
Page 28: Search - February 2013
Page 29: Search - February 2013
Page 30: Search - February 2013
Page 31: Search - February 2013
Page 32: Search - February 2013
Page 33: Search - February 2013
Page 34: Search - February 2013
Page 35: Search - February 2013
Page 36: Search - February 2013

36 SEARCH - THE INDUSTRIAL SOURCEBOOK | F E B R U A R Y 2 0 1 3

NEWS, ViEWS & ANAlySiSL a t e s t h a p p e n i n g s i n t h e w o r L d o f M a n u f a c t u r i n g

India’s industrial production contracted to a four-month low of 0.1% in November as compared to a year ago owing to the poor performance of the manufacturing and mining sectors along with a decline in production of capital goods. The industrial output, as measured by the Index of Industrial Production (IIP), dipped from a robust 8.3% in October.

According to Sonal Varma of Nomura Financial Advisory and Securities, the momentum in the industrial sector seems to be stabilising and if it continues, the segment may show a significant pick up in the December quarter. According to her, the growth cycle itself seems to be stabilising and that is a positive sign. Besides, Varma feels that if the current trend in industrial production for FY13 continues, there is no reason to be pessimistic. Varma also expects a 5.5% GDP growth for the current fiscal year. Gaurav Kapur of Royal Bank of Scotland is also of the view that the nascent signs of improvement are now visible in the Purchasing Managers’ Index (PMI) numbers of December. “A pick up may still take time but clearly, things are not getting any worse. Hence, the IIP data or whatever

information you can gather from this one number or even the series in the last couple of months, points to the fact that we have hit a bottom. Things have turned around,” he explained.

Attributing the decline in the industrial output in November to statistical reasons, Shri Montek Singh Ahluwalia, Deputy Chairman, Planning Commission, recently said that the growth has already bottomed out and efforts taken by the government will yield fruits in the coming month.

“This data does not contradict the proposition that the economy has bottomed out. It now needs to move upwards…you need to wait to see what December is like,” the Planning Commission’s Deputy Chairman said. He expressed hope that steps taken by the government have given clear signals of growth in the last several months and would help in improving the investment climate. Moreover, he said that the results of the government’s decision to remove major bottlenecks for big infrastructure projects and improve availability of coal for the power sector would manifest soon.

Source: www.moneycontrol.com

India’s manufacturing activity rose in December to its fastest pace in six months, led by strong factory output and a rise in new orders, a private business survey showed recently.

The Purchasing Managers’ Index (PMI) from HSBC, which gives a snapshot of manufacturing health from output to jobs, climbed to 54.7 in December, compared to 53.7 in the previous month. A figure of over 50 indicates growth in the sector, while below 50 points to contraction.

“Activity in the manufacturing sector picked up again, led by faster output growth and a further uptick in new orders, which led to a faster increase in backlogs of work,” said Leif

Eskesen, Chief Economist, HSBC. The survey’s findings—based

on data from more than 500 manufacturers—come after India’s economic growth fell to 5.3% in the July–September quarter, extending a slowdown since the start of the year. The government has forecast a growth of 5.7% to 5.9% for the fiscal year to March, which is far below the near double-digit pace India set before the onset of the global financial crisis.

India’s inflation cooled to a 10-month low of 7.24% in November, which is still well above the Central Bank’s comfort zone of near 5%, and Eskesen said that pressures were likely to remain.

‘IIP dIP due to statIstIcal reasons, ImProvement Is ImmInent’

‘IndIa’s manufacturIng actIvIty at sIx-month hIgh’

Hon’ble Prime Minister Dr Manmohan Singh recently asked vehicle manufacturers to adopt electric technologies fast in order to reduce dependence on imported oil and supplement efforts for a greener transport system. “It is important that we make efforts for reducing the transport sector’s dependence on oil. One of the ways in which this can be achieved is by faster adoption of the full range of electric vehicle technologies, including hybrid vehicles,” the Hon’ble Prime Minister said after unveiling the National Electric Mobility Mission Plan 2020.

As per the National Electric Mobility Mission Plan, 6–7 million electric vehicles along with resultant liquid fuel savings of 2.2–2.5 million tonne can be achieved in 2020. The mission involves a total investment of over `23,000 crore, which would be equally shared by the government and the auto industry.

He also asked the automotive industry to make all possible efforts to develop capabilities in the area of electric mobility. At present, the production of electric and hybrid vehicles is negligible in the country.

Stating that significant barriers exist for the faster adoption of new electric mobility technologies by consumers, he said, “It is, therefore, necessary to create an ecosystem where these technologies can be nurtured. The government is committed to work with the industry and other stakeholders to make it happen.” The plan is expected to be implemented from April 2013 in a phased manner. The Department of Heavy Industry (DHI) would approach the Finance Ministry soon to gets its nod for funding the mission.

hon’ble PrIme mInIster dr manmohan sIngh asks

the auto Industry to QuIckly adoPt electrIc technology

Page 37: Search - February 2013

L a t e s t h a p p e n i n g s i n t h e w o r L d o f M a n u f a c t u r i n g

F E B R U A R Y 2 0 1 3 | SEARCH - THE INDUSTRIAL SOURCEBOOK 37

China will remain the primary driver of global production growth over the next four years, but the US will rank second among vehicle producing countries in the world as North America continues to play a unique role in the automotive industry.

The report comes from the newly released joint Global Light Vehicle and Powertrain Forecast service from two respected sources of automotive data and analysis, WardsAuto and AutomotiveCompass. The new forecast also calls for auto makers to consolidate the number of platforms underpinning their vehicles while increasing the percentage of cars and trucks that rely on smaller engines. The WardsAuto/AutomotiveCompass forecast projects growth in all global regions through 2018, with the total vehicle output increasing 23% over the next six years. The report highlights the China-led Asia-Pacific region’s increasing dominance, especially through 2016, when production in China alone will climb to a stunning 26 million units—a 7.5 million-unit increase from 2012.

By comparison, production in the US is projected to increase by 1.3 million by 2016, while production in the third-

highest producing country, Japan, is forecasted to decline by 875,000 units over the next four years, as the capacity continues to shift to other locations.

In that same period, India will surge ahead of South Korea and Germany to rank fourth among the vehicle producing countries. The outlook also projects that Volkswagen will claim the top-produced platform in the world by 2015, as its MQB architecture, which will spawn several small- and mid-size car and cross/utility vehicles, should end the three-year reign by Toyota’s MC platform that began last year and is expected to continue through 2014.

The forecast also confirms the gradual trend of production consolidation among global platforms. In 2012, 31 platforms accounted for half of the global production. In 2016, that number will drop to 27. The WardsAuto/AutomotiveCompass global powertrain forecast also shows the shift to smaller engines continuing as production of vehicles with 4-cylinders engines or less rises from 82% of the total in 2012 to 85% in 2018. Ironically, as North America remains a bastion for larger engines, it will lead to the growth of smaller engines.

The leader in motion and control technologies, Parker Hannifin Corp, recently inaugurated its first greenfield manufacturing facility at Chennai. The new facility will manufacture products and systems for segments such as automotive, off-highway mobile, telecom, oil & gas, mining and primary metals. The facility will employ 300 people in the next 2–3 years.

With this facility and acquisitions, Parker Hannifin India plans to double their revenues within the next five years.According to Tom Williams, Executive Vice President and Operating Officer, Parker Hannifin Corp,

expanding business in Asia, and specifically India, represents a significant aspect of Parker’s future growth strategy. “Asia represents approximately 10% of our sales today; but over time, we would expect that to be as much as 20% as our target is to double our business in the region over the next several years,” Williams added.

As part of its long-term growth strategy in India, Parker has made five strategic acquisitions in India in the past two years and nine since 2005. The Chennai facility is in the process of getting a LEED certification.

chIna domInates world vehIcle ProductIon

fIrst greenfIeld manufacturIng facIlIty In IndIa for Parker hannIfIn

Hitachi Ltd recently announced that Hitachi Hi-Rel Power Electronics Pvt Ltd, a group company in India, has established and started operations at a new manufacturing facility in the Sanand-II Gujarat Industrial Development Corporation (GIDC) Estate. With this new factory now operating alongside its existing Gandhinagar factory, Hitachi Hi-Rel intends to enhance the line-up of industrial power electronics for use in plants in fields such as power generation, steelmaking and chemicals. The goal is to expand Hitachi Hi-Rel’s revenue of the growing Indian infrastructure market.

Hitachi Hi-Rel’s Gandhinagar factory manufacturers power electronics such as industrial UPS, battery chargers and inverters for railway applications. Having commenced operations, the Sanand factory will produce industrial power electronics products such as medium-voltage and low-voltage inverter drives, steel automation drives and industrial automation products to increase its lineup of offerings. This will enable Hitachi Hi-Rel to manufacture cost-competitive products with best in class quality with Hitachi’s manufacturing know-how. By increasing production capacity through the start of operations at the new factory, Hitachi Hi-Rel seeks to increase its revenue of the Indian market. At the same time, Hitachi Hi-Rel will strive to expand business with a view to exporting products to regions that hold potential markets for social infrastructure systems; namely, the Middle East, Southeast Asia and Africa, among others. Hitachi Hi-Rel aims to generate revenues of `8 billion in the fiscal year ending March 31, 2016.

hItachI hI-rel Power electronIcs’ new

manufacturIng facIlIty commences oPeratIons

Page 38: Search - February 2013

L a t e s t h a p p e n i n g s i n t h e w o r L d o f M a n u f a c t u r i n g

38 SEARCH - THE INDUSTRIAL SOURCEBOOK | F E B R U A R Y 2 0 1 3

The pick-up in demand for steel in China recently is pushing the global steel prices higher. This is likely to benefit the Indian companies, which have been under pressure due to low demand and iron ore availability issues.According to reports, Chinese HRC export prices have hit $600 per tonne FOB for March shipment. The HRC export prices stood at $560 per tonne over the last two months. Baosteel (China) recently increased domestic HRC steel prices by $25 per tonne.

Korean steel major Posco also announced price increases for January 2013. Similarly, in Europe, Arcelor Mittal and Tata Steel Europe have announced sharp price increases. Indian steel mills have increased steel prices by 2–3% recently. Analysts say the increase in imported steel would allow Indian companies to hike prices in February and March by at least 5–7% cumulatively. This will be positive for the Indian steel companies. According to the recent Kotak Securities Private Client Research report, the recent

data of India’s manufacturing activity surging to a 6-month high in December 2012, boosted by strong factory output and a spike in new orders, is a positive indicator of the revival of domestic steel demand. There are expectations of a rate cut by RBI in this quarter and the global macro news flow also seems to be turning positive. The report said that the Indian steel prices are likely to follow the global trend more so, given it would be the beginning of peak seasonality. Some Indian steelmakers attempted to increase steel prices between `500–1,500/tonne in December 2012 without much success.

The Indian steel companies were down on profit booking after the recent upmove in metal stocks. The companies are likely to report weak numbers for the quarter ended December due to muted volumes. Meanwhile, India Ratings expects the credit profiles of its rated steel producers to remain stable in 2013, driven by continued albeit slow growth in the domestic steel demand.

GE’s joint venture with Triveni Turbine Ltd (Triveni Turbine), GE Triveni Ltd (GETL), has been selected by Thermax—one of the largest power sector Engineering, Procurement and Construction (EPC) companies—to supply two advanced steam turbines of 40 MW each. This is for a new 80-MW distributed power plant that will generate power for the National Mineral Development Corporation (NMDC) and will be used at its new 3 million tonne per annum integrated steel plant in Central India. The project is expected to commence generation by mid-2015. GETL will supply two GET 6 steam turbines, which will boost the site’s energy production by 80 MW. In addition, GETL will also provide the complete design and engineering support to the EPC team for this project.

The steam turbine is a packaged high-speed turbine deploying what is known as impulse & reaction hybrid technology, which optimises efficiency of the turbines. This combination of impulse and reaction technologies allows higher efficiency of steam energy recovery with greater operational flexibility. TTo increase the efficiency further, turbines are also designed for Combined Heat and Power (CHP) applications, which allow the steel plant to use the system to generate process heat required at the facility. In order to provide the highest assurance of quality to the customer, the rotors in these turbines will be dynamically balanced for high-speed conditions by using a specially designed high-speed vacuum balancing tunnel located at the Triveni Turbine Manufacturing facility in Bengaluru. Banmali Agrawala,

President & CEO – Energy Businesses, GE India, said, “We are committed to supplying technology that can help India produce the energy it needs to sustain its dynamic economic growth and help support an improved quality of life for its citizens. Both GE and Triveni Turbine Ltd are known for their world-class manufacturing and testing facilities along with service excellence and have created GETL to join forces and share their expertise.”

Dhruv M Sawhney, Chairman, Triveni Turbine Ltd, said, “GETL, on the back of successful delivery of its first steam turbine, has received its second order from India’s leading Power Sector EPC company. This association will help GETL to connect their customers to our products and also enable GETL to tackle challenges in new, innovative ways.”

hIke In global steel PrIces PosItIve for IndIan comPanIes

ge trIvenI suPPlIes advanced steam turbInes to Power Plant Project In chhattIsgarh

Danfoss Industries Pvt Ltd, a leader in mechanical and electronic components and solutions, recently announced the appointment of Kamal K Singh as Director of Power Electronics of Danfoss India. An important aspect of Kamal’s role will be to encourage the growth and visibility of the Power Electronics Division and also to ensure the division’s continued expansion in the country.

“I am delighted to begin work with Danfoss and I am looking forward to work with the company to drive more focus and visibility while reinforcing the high value and credibility Danfoss is associated with,” said Singh.

With over 26 years of rich experience, Kamal is a specialist in project sales, project management, after sales–service support and supply chain management.

kamal k sIngh aPPoInted as new dIrector for Power

electronIcs dIvIsIon of danfoss IndIa

Page 39: Search - February 2013
Page 40: Search - February 2013

L a t e s t h a p p e n i n g s i n t h e w o r L d o f M a n u f a c t u r i n g

40 SEARCH - THE INDUSTRIAL SOURCEBOOK | F E B R U A R Y 2 0 1 3

Mahindra & Mahindra will invest $900 million over the next 4–5 years in Korea-based SsangYong Motor for developing three new vehicles and six engines. Pawan Goenka, President – Automotive & Farm Equipment sectors, Mahindra & Mahindra, has said that the project will be financed partly from external borrowings, partly from internal generation and partly from fresh equity.

The Indian automotive major bought a majority stake in SsangYong Motor for $463.6 million in 2010. After the acquisition, sales have grown by 6–7% in the Korean market.

Further commenting on the break-even, Goenka said, “That will happen over the next year-and-a-half. Beyond that, we have not made complete plans on how the investments

will take place.” He also pointed out that currently Mahindra & Mahindra has no plans to develop small cars and the company will continue to focus on utility vehicles.

Further, Mahindra & Mahindra is set to sign an agreement to buy out US-based Navistar Group’s stake in Mahindra Navistar Automotives Limited (MNAL). The company, by the month-end, will invest `200–250 crore over the next three years to maintain as well as upgrade the products it has developed with its partner. Goenka said that after the acquisition, the branding of MNAL products would change. The Navistar Group will continue to provide technical support for developing engines, but for commercial vehicles they do not require any assistance.

Power Transmission and Distribution (T&D) is a crucial link in the supply chain of power. It is expected that the T&D market would grow from $100 billion in 2010 to over $130 billion in 2015, demonstrating a CAGR of over 6%. However, power distribution remains a weak link with the losses in electricity distribution growing. If the trend continues, the distribution utilities may suffer a loss of over 1.16 lakh crore by 2014–15.

Speaking on the challenges faced by the T&D sector at the 6th IEEMA T&D Industry Conclave, Arun Maira, Member, Planning Commission, said, “The T&D sector is suffering due to delays in generation and transmission plans, high aggregate technical and commercial losses.

However, with the sector receiving due attention and investment from the government in the form of higher share of allocated expenditure in the XI and XII plans and programmes like Restructed Accelerated Power Development & Reforms Programme (R-APDRP) and

HPTCP, opportunities available for transmission equipment players appear to be good.”

He also pointed out, “There is a lack of collaborative and cooperative efforts. We have the talent, we have the manpower, we have the technology, but we do not want to share it and this mentality hampers growth.” “We should make collaborative and cooperative efforts to boost the production and manufacturing,” he said.

Further, JG Kulkarni, President, IEEMA, said that Indian companies should work for going beyond the domestic market. He added that there is a need to mix products and markets to optimise results. Further, policy initiatives like stipulating a minimum percentage of the total procurement by any utility to be of ‘Made in India’ products and improving the domestic availability of raw material and critical inputs (like CRGO) will be a boon for the electrical equipment industry.

m&m to Invest $900 mIllIon In ssangyong motor

‘t&d sector receIvIng due attentIon from the government’

Racold Thermo, the leader in manufacturing and marketing of water heating products, has bagged the prestigious National Energy Conservation Award (NECA) by the Bureau of Energy Efficiency (BEE) for the third time in a row. BEE coordinates the Energy Conservation Awards Scheme of the Ministry of Power. Racold received this award in the category of ‘Manufacturer selling the highest number of energy efficient appliances’ for their Electric Storage Water Heaters.

The awards were presented by the Hon’ble President of India, Shri Pranab Mukherjee, and the Hon’ble Minister of State for Power, Shri Jyotiraditya Scindia, at a special ceremony.

On receiving the award bestowed by BEE, Mathew Job, MD, Racold Thermo, said, “We are proud to receive this award by BEE for the third time in a row in recognition of our contribution towards energy conservation. We are the only company in this industry to achieve this distinction three times.”

“The environmental scenario is changing and there is an urgent need to adopt energy-efficient technologies. Racold Thermo Ltd, has taken the lead in introducing more advanced range of energy efficient water heaters in the country. This award is a recognition given by the Ministry, which encourages us to raise the bar even more in the future,” he added.

Electric water heaters contribute approximately 30% to the household electricity bill and using energy-efficient water heaters can significantly reduce the electricity consumption and costs. In 2012, Racold sold over half a million water heaters.

racold thermo sets record: thIrd tIme wInner at the

neca awards

Page 41: Search - February 2013
Page 42: Search - February 2013

42 SEARCH - THE INDUSTRIAL SOURCEBOOK | F E B R U A R Y 2 0 1 3

CUTTING-EDGE SOLUTIONS

he annual cost to industry of illegal copies of branded products is estimated

at a staggering US$650 billion worldwide, and German machine tools manufacturers are becoming an increasingly popular target for pirating operations. Around one third of all companies have seen their business eroded by cheap imitations of their products, especially manufacturers of textile machines, compressors and plastics processing equipment. “Most companies have no idea just how easily their products can be

copied,” said Bartol Filipovic, Head – Product Protection Department, Fraunhofer Research Institution for Applied and Integrated Security (AISEC)in Garching near Munich. AISEC advises companies on how best to protect their products and IT services from unlawful attacks on their proprietary rights.

In addition to conducting research, AISEC’s most important role is instructive. AISEC’s researchers analyse the information to identify any weaknesses and offer suggestions for making the product more secure.

Methods against forgeryOne option is to install cryptographic devices that encrypt the data stored within the machine. These devices generate the corresponding decryption key based on the duration of electrical signals on the microchip. The signals emitted by other chips, even those from the same production batch, will be of a slightly different duration, rendering the key unusable. Another option is to use hardwired control units. These purpose-built chips make it extremely difficult for offenders to rip the software and run it using standard chips built into product imitations. However, it is possible for companies to safeguard computer programmes without the need for special hardware; for instance, by adopting obfuscation techniques. It is definitely worthwhile for companies to analyse and develop suitable technical safeguards, said Filipovic.

he Seventies: Smog alert in the Ruhr area, acid rain, dying spruce trees in the Bavarian

Forest. In those days, the solution was filter systems for the smokestacks in the Ruhr area. Today, people in the urban areas are suffering from high levels of pollution that is being caused by, among other things, automotive traffic, particularly nitrogen oxide (NOx). In the meantime, the European Union tightened the limit values even further; in many communities they are being exceeded. According to Michael Hüben of the Fraunhofer Institute for Molecular Biology and Applied Ecology IME in Schmallenberg, Germany, “on stretches with heavy traffic, there is a particular need for action.”

“Effectiveness of photo-catalytic removal of nitrogen oxide on coated building test panels” shows how photo-catalytic surfaces contribute to the removal of NOx and how the coatings prove themselves during long-

term operation. “Coatings that are photo-catalytically active can help to reduce nitrogen oxides,” explained Dr Michael Hüben, adding, “There are already a number of products available for the photo-catalytic coating of surfaces, but the measurement method standardised according to ISO 22197-1 cannot be applied to all problems. At the IME, we have now developed a

special measurement cell, which we are using in our project.”

Explaining the set-up of the test, Hüben said, “The surface of the test sample must be photo-catalytically active, meaning it removes NOx when exposed to light.” The surfaces contain titanium dioxide catalysts—a material

that is affordable and available in large quantities. Then, exposed to daylight, titanium dioxide catalyses the NOx into nitrate. “The photo-catalytic activities of the samples are determined using a flow-through process,” said the scientist. During the next two years, the experts will determine regularly how much nitrous oxide is being removed. In this manner, they will obtain a solid basis for the long-term effects of the coatings. Only then, one can be sure that the coatings help and that larger surfaces, such as entire housing tracts, can be economically furnished with coats that are photo-catalytically effective.

Machines With Built-in copy protection prevent piracy

clean air: neW paints Break doWn nitrogen oxides

t

t

The service is less costly than the damages inflicted by product piracy. The cost of such services varies according to the scope of analysis and the extent of the protection required.

USP

Surfaces with photo-catalytic characteristics clean the air off nitrogen oxides and other health-endangering substances.

USP

Calibration of the teststand for coatings

© W

olfra

m S

chei

ble/

Frau

nhof

er

Researchers developing technical safeguards

© V

olke

r Ste

ger

Page 43: Search - February 2013

F E B R U A R Y 2 0 1 3 | SEARCH - THE INDUSTRIAL SOURCEBOOK 43

CUTTING-EDGE SOLUTIONS

orging dies must withstand a lot. They must be hard so that their surface does not get

too worn out and also be able to last through great changes in temperature and handle the impactful blows of the forge. However, the harder the material, the more brittle it becomes. Also, forging dies are less able to handle the stress from the impact. Hence, manufacturers had to find a balance between hardness and strength. One of the possibilities is to surround a semi-hard, strong material with a hard layer. The problem is that the layer rests on the softer material and can be indented by blows. Researchers from the Fraunhofer Institute for Production Technology IPT in Aachen, Germany, have now developed an alternative. “The forging dies we have been working on have a useful life that is

up to twice as long,” explained Kristian Arntz, Department Head, IPT, adding, “We are using a working material that is able to handle the impact stress well. We melt the uppermost layer of the material with a laser and introduce a powder into the material, which is used to chemically alter its characteristics. We have achieved a large degree of hardness in the upper millimetre.”

To be able to work on the forging dies, the scientists and their colleagues at Alzmetall have developed a machine

with which they are able to work on the free-form die inserts and forging dies. They also developed a software with ModuleWorks, which ensures

that the laser travels across the surface at a constant speed and that the gaps between the laser paths remain even—otherwise tears would develop in the surface. “This is not a problem if the surfaces are straight; however, we had to develop special algorithms for free-formed tools that keep the path distance and the speed constant,” said Arntz.

Courtesy: Fraunhofer Research

o date, it has been very laborious to manufacture fibre-reinforced composites

with a thermoplastic matrix in large quantities. On the one hand, the textile-like dense continuous fibre-reinforced structures are difficult to shape; on the other, joining the continuous fibres with a highly viscous thermoplastic matrix material is a highly complex process. To date, there is no economically profitable production technology for large-volume component series.

Together with the injection molding machine manufacturer

ENGEL Austria GmbH, the scientists of the Fraunhofer Institute for Chemical Technology ICT in Pfinztal (Germany) have, for the first time, brought a technology to production readiness that allows the series

production of such continuous fibre-reinforced thermoplastic composites with an injection molding process. So far, it has only been possible to use the injection molding process for fibre-reinforced composites made of short or long fibres.

Based on the results of their own

research, ICT scientists, together with ENGEL, have developed a prototype machine for injection molding. The ENGEL e-victory 120 can handle all the necessary working steps in a single machine. The reactive components are prepared and mixed, and the material is injected into the molding die. The in-situ polymerisation also takes place in it, after the textile reinforcement structures have been introduced. “ICT and ENGEL have developed a robust, compact and fully automated technological system to series readiness that is flexible and quick at the same time. The process, which, to date, had been distributed across several machines, can now be carried out on a single one,” said Dipl -Ing Peter Egger, Head – Technology Center for Lightweight Composites, ENGEL. e-victory has already passed its first crucial test: ENGEL produced, as an example, a brake pedal insert made of fibre glass-reinforced polyamide for the automotive supplier ZF Friedrichshafen.

Better protection for forging dies

technology to produce coMposites for large-scale Manufacturing developed

f

t

The forging dies have a useful life that is up to twice as long.

USP

• The ENGEL e-victory 120 can handle all the necessary working steps in a single machine.

• It is a robust, compact and fully automated technological system that is flexible and quick at the same time.

USPsUsing the ENGEL e-victory 120, thermoplastic composite structures can be mass-produced using the injection molding process

© E

NG

EL

The harder the material, the more brittle it becomes.

Page 44: Search - February 2013

Mrinal Vohra

SEARCH - THE INDUSTRIAL SOURCEBOOK | F E B R U A R Y 2 0 1 344

Latest tech advancementsGE Oil & Gas is committed to support customers across the entire oil and gas value chain. GE Oil & Gas today fosters cross-pollination of best in class technologies from its sister business units like the usage of composites used in GE Aviation to develop the next generation deepwater risers and the usage of scanning techniques from GE Healthcare to develop a highly reliable UltraScan Duo. Today, we take GE’s safety, integrity and quality culture to segments such as deepwater and surface Exploration & Production (E&P)where our upstream portfolio features structured tree configurations with integrated controls for both shallow & deepwater, manifolds, risers & subsea connectors, subsea compression and power distribution.

Key considerations for deveLoping new technoLogy equipment for oiL & gas sectorGE is focused on constantly innovating its products and services to address customers’ needs. GE Oil & Gas not only believes in delivering solutions for current complexities in E&P operations, but is engaged with the customer at the preliminary stages in their exploration activities to understand their technology needs over a 5–10 year horizon, and share feedback to research teams to develop solutions in accordance with customer requirements. We understand that for these applications, our customers not only need the best technology but also local service capabilities. Secondly, GE keeps a track of key industry mega trends & government focus on battling the existing domestic gas deficit, escalating oil import cost, etc. Policy approval delays have been one of the biggest hurdles in the way of E&P. GE is optimistic that with the economic reforms underway, new technology will have several takers in the next 2–5 year to enable them to address the surge in onshore and offshore development in the country. Lastly, we aim to increase

activity share & expand our range of products across the activity flow by leveraging our partners’ tech advances.

green technoLogies in the oiL &

gas sectorGE has always supported the drive for cleaner technology—its development & implementation. Towards its recent efforts, the Tamil Nadu Government

india remains one of the largest

“policy approval delays have been one of the biggest hurdles in the way of e&p. ge is optimistic that with the economic reforms underway, new technology will have several takers in the next 2–5 year to enable them to address the surge in onshore and offshore development in the country,” affirms mrinal vohra, ceo – india, Bangladesh & sri Lanka, ge oil & gas, during an interaction with arindam ghosh. excerpts…

hydrocarbon importersin the gLoBe

Page 45: Search - February 2013

Mrinal Vohra

F E B R U A R Y 2 0 1 3 | SEARCH - THE INDUSTRIAL SOURCEBOOK 45

honoured Measurement & Control’s Coimbatore site with the prestigious Green Award. The facility is part of the flow & process technologies product line. The facility won an award for its excellent track record of environmental compliance and commitment towards maintaining a greener environment. The site demonstrated initiatives towards water conservation, green cover establishment, compliance to the local law conditions, pollution control mechanisms, adherence to the limits of pollutant levels, energy conservation projects and maintaining a good ecological footprint in the industry.

In 2005, GE launched ecomagination to address critical challenges, including the need for cleaner and more efficient sources of energy, reduced emissions and abundant sources of clean water. Since then, we have been using our unique energy, technology, manufacturing and infrastructure capabilities to develop solutions. In 2011, GE Oil & Gas announced that both its Integrated CO2 Compressor & Pump System and FuelEx™ Natural Gas Liquids Recovery System technologies were GE ecomagination certified, reflecting GE’s commitment to developing customer-focused solutions with lower environmental impacts. In 2012, GE Oil & Gas launched two new ecomagination certified products, Micro LNG and CNG in a box, reflecting GE’s commitment to developing customer-focussed solutions with lower environmental impacts.

r&d and design capaBiLities of india in this fieLdGE has been at the forefront with regards to investing in talent for expanding its footprint in R&D and design capabilities in India and has a dedicated technology centre based in Bengaluru. This is one of the four such centres in operation across the globe. The centre has been enhancing its ability for building better analytical & numerical prediction models to help match the product performance needs

of customers in the O&G domain. We have synergy among different domains among GE businesses to leverage best practices. We also collaborate with universities and test facilities to test and learn quickly.

project cLosest to your heart Bibiyana in Bangladesh was a very amazing find in a complex lithology, production in carbonates. East Java posed interesting production challenges including caverns, hole integrity, etc. Operationally speaking, some of the remote operations in Sakhalin were probably among the most challenging since everything had to be operationally

tested and mobilised from Singapore.

india: a Land of opportunitiesIndia remains of the largest hydrocarbon importers in the globe, after the US, Russia & China. Today, we have transitioned to a stage where from 0.25 MMTPA of refining capacity. From only one operating refinery during the 1950s, India now has 25 operating refineries that boast of a net processing capacity of 215 MMTPA. This is expected to only increase to the tune of ~270 MMTPA over 2015–16. In order to address this surge, India is expected to focus on developing more offshore and onshore

Your passionIn the oil sector, the drive to make things work and engage with people and lead teams through many challenges has been a passion for me. I love the concept of novel approaches; walking through uncharted territory and succeeding makes me tick. An oil well humbles many people, and to work consistently in this industry, the ability to learn and pick up new ideas is something that retains the interest of getting to work everyday. I have been very closely

involved in the economics of the oil sector and its impact on service companies and the macro economics of the market to determine strategic plans for organisations and the M&A activities in the industry. Even though, this is not my current role, I continue to remain involved in keeping my economic observations sharp and watch them play out.

Book that has inspired you the most I read a fair bit, and different things, some are classics, some modern literature and others which are on business management, lifestyle, etc. I remember reading ‘Les Miserables’ by Victor Hugo many years ago when I was still schooling. This classic left a lasting impression on me. The story is a moving account of catholicity of character and values in life despite the circumstances around. Amitav Ghosh’s ‘Glass Palace’ was another great story. I could connect with the description of many small details having lived in South East Asia for many years as the book, set in the colonial context, narrates the story of a self-made businessman in Malaya.

Your success mantraI think a combination of values, talent and outlook towards life is the recipe for what a person is about. So I work hard, play hard, remain open to new thoughts and keep chipping away at things. Most often it works, sometimes it does not, but I take both in my stride and continue to keep looking for new ways to achieve success. I have found honesty, humility and dogged persistence usually pay out. However, one always needs some luck and someone somewhere who takes notice of you and lends a helping hand. Without help and support from mentors and well-wishers, one cannot progress.

Up close & personal

Page 46: Search - February 2013

Mrinal Vohra

SEARCH - THE INDUSTRIAL SOURCEBOOK | F E B R U A R Y 2 0 1 346

E&P facilities, gas processing plants, refineries & petrochemical plants, cross country pipelines, etc. GE looks at this as an opportunity to further develop its presence in country.

path BreaKing projects in pipeLineGE’s broad experience and deep domain knowledge of various industries are applied in the oil & gas industry to offer industries the most comprehensive products and technologies that continually break new ground in terms of operational efficiency, productivity, reliability, safety and environmental performance. Among these, GE Oil & Gas introduced its next generation technology for shearing and sealing wellbore tubulars in 2012. The new Blind Shear Ram is designed for use in GE’s 18-3/4 inch ram Blowout Preventers (BOP) used in drilling. The new patent-pending Blind Shear Ram has the ability to both shear and

seal after cutting 6-5/8 inch tool joints, which are heavy coupling elements for a drill pipe.

GE’s Blind Shear Ram allows customers to use current BOP stack arrangements without having to manage the spacing between rams or create operational methods to avoid 6-5/8 inch tool joints. This technology solution is also designed to eliminate non-shearable sections, allowing for greater shearing flexibility.

The Blind Shear Ram is the latest example of how GE continues to seek and develop innovative solutions for the challenges that our customers face in drilling, particularly in deepwater and challenging environments. We are continuing testing to understand the full upper limits of what the new blind shear ram designs can achieve.

your expansion & investment pLans in indiaGE India has announced that its

new manufacturing facility in Pune would develop localised products and solutions for the energy sector in its first phase of operation commencing in 2013. The focus on manufacturing is in line with the need for localised products and solutions suited to Indian customers across GE’s various businesses present in the country. The facility, to begin with, will focus on energy products and technologies driven by the industry’s needs for power generation, transmission & distribution, oil & gas as well as measurement & control. In addition, GE will package its environment-friendly technologies such as hybrid batteries for energy storage and biogas power generation technologies at the plant. The site will enable assembly and production support for any GE business that needs local manufacturing capability in India.

[email protected]

Page 47: Search - February 2013

SEA

RC

H

Febu

ary

2013

Ad

Nam

e: M

GM

P

g N

o. 4

7

Page 48: Search - February 2013

SEA

RC

H Febuary 2013 A

d Nam

e: Renu Pg N

o. 48

Page 49: Search - February 2013
Page 50: Search - February 2013

Jan Widerström

Defence Possibilities & ProsPects of saab in inDia anD arounD the worlDSaab India Technologies Pvt Ltd has been a supplier to the Indian Armed Forces for over three decades. Saab signed its first licence agreement in India very early into its relationship with the country, which continues to grow stronger. Today, majority of the company’s business units are active in India and involved in developing solutions for the Indian Armed Forces in a number of different areas.

Saab is also endeavouring to reduce its manufacturing and production costs by developing, designing and manufacturing state-of-the-art defence and civil security systems in India. India will become a key manufacturing hub for Saab in the near future and the company is in advanced discussions with many Indian companies, both in the public and private sectors.

The Saab Group intends to make India a ‘home market’ by leveraging the country’s manufacturing strengths for exports to world markets. Equally important, for all major future programmes, Saab intends to collaborate with an Indian company either through a teaming agreement or through a joint venture. It will share technology with these companies, localise production and offer it to both Indian & global customers. Saab’s ambition is to enable India to develop a strong distinct position by developing its defence sector. The company continues to develop its competence in India by

the defence manufacturing sector can create over one million jobs in the domestic market

“saab sees india today as willing to invest, share risk and manufacture products that are globally competitive,” says Jan widerström, chairman, saab india technologies Pvt ltd, during a tête-à-tête with Prateek sur. saab

india technologies Pvt ltd is a fully owned subsidiary of saab ab, sweden, and was established in october 2011. widerström, who has been representing saab in india since 2005, has played a critical role in setting up the

company’s presence in the country. he has also been instrumental in creating awareness in the indian defence sector about what saab can contribute to the nation. excerpts...

50 SEARCH - THE INDUSTRIAL SOURCEBOOK | F E B R U A R Y 2 0 1 3

Page 51: Search - February 2013

Jan Widerström

F E B R U A R Y 2 0 1 3 | SEARCH - THE INDUSTRIAL SOURCEBOOK 51

growing its organisation by bringing in experienced Swedish personnel and hiring local Indian expertise.

Saab sees India today as willing to invest, share risk and manufacture globally competitive products. The collaboration with suppliers in India has developed from the need to lower costs while focusing on quality and delivery at the same time. Production in India is now an important part of Saab’s production flow and will remain so in the future.

international best Practices worth emulating in inDian Defence ProDuctionIn any manufacturing sector where companies from two nations work together, Transfer of Technology (ToT) and complete industrial cooperation are very important. The Saab approach to successful ToT is based on extensive interaction between the two partners that aims at long-term industrial expansion as well as technology and spin-off effects that do not end with the end of obligation and are not restricted to the current application of technology. Saab views ToT as a base for long-term cooperation.

The global best practices followed by Saab guarantees access to all levels of technology and management of all aspects of the product life cycle. Saab will share technology with partner companies, localise production and offer it to both Indian & global customers. The company believes that such initiatives will deliver large benefits to their Indian partners as well as indigenous companies. For one, by bringing its production to India, local adaptation will be easier and faster.

For Saab, ToT not only includes the technology base for developing the present product portfolio but also extends the knowledge that enables the receiver to utilise and apply the technologies transferred. Saab believes that India has the necessary capability and can absorb state-of-the-art technologies for manufacturing

world-class products.

Private Players’ entry in Defence ProDuction: how Does it affect growth?There is a marked lack of private players in the Indian defence sector. One good example is the Defence Shipyards, where allowing private players such as Pipavav Defence and Offshore Engineering to participate in defence production resulted in the reduction of load from Mazagon Dock and allowed for a swifter production process.

Leveraging the private sector as a strategic defence asset and helping it to become a partner in the nation’s growth and modernisation plans is important. The increased push for private participation will enable domestic companies to build critical capabilities

in areas that were heretofore excluded for them. The multiplier advantages that could accrue in a host of related sectors such as communications, manufacturing and automotive, among others, could be enormous. World over, advancements in military technology have eventually filtered down to other sectors, giving companies a host of competitive advantages.

creating a vibrant Domestic Defence inDustrial base in inDia anD across the globeThe Defence Production Policy 2011 has reiterated that self-reliance in the field of defence is both strategically and economically important for a nation. Developing a strong defence manufacturing sector enhances security by reducing reliance on foreign suppliers. This provides an opportunity to create domestic technologies & capabilities that often have significant civil applications and provide a platform to tap export markets. Most importantly, it has the potential to create over one million jobs in the domestic market.

We believe that R&D is the way forward for the defence sector. For establishing a strong vibrant defence industrial base, it is important that technology is developed and innovations are undertaken. European defence companies are pursuing opportunities in emerging markets. The Middle East, Brazil, South East Asia and India all offer growth, although there is strong competition and barriers to entry in these countries can be challenging.

In Sweden, there is a well-developed network among researchers, industry, political decision makers and public authorities. This has made it possible to tap even spin-off technologies and build successful industries in core and allied sectors simultaneously. Saab is willing to explore avenues for participating in any public private partnership for growth and development of the defence sector in India.

[email protected]

Jan Widerström has been representing Saab India Technologies Pvt Ltd in India since 2005. He has also lived in India for three years with his family. During this time, he played a critical role in not only setting up Saab’s presence in India but also in creating awareness in the Indian defence sector about what Saab can contribute to its business. He was actively involved in various activities of the Swedish industry in India, first as a founding member and later as the Chairman of Swedish Chamber of Commerce in India (SCCI). This role with SCCI gave him an opportunity to understand the different sides of doing business not only in the Indian defence sector but also in other industries of Swedish interest. His wide experience of working with India positions him very well to be a part of Sweden–India Business Council as he understands the mindset of Indian partners and is also able to explore it from a Swedish perspective for the benefit of both the partners, thereby providing a win–win situation for both the nations.

Page 52: Search - February 2013

SEARCH - THE INDUSTRIAL SOURCEBOOK | F E B R U A R Y 2 0 1 352

RaineR Klug

Partnership, Precision and PioneeringThe growing market in India, the Middle East and across the globe requires a combination of electronic and mechanical instrumentation products. The Swiss company Baumer recently acquired the Indian biggie Waaree

Instruments Ltd. Rainer Klug, Member – Executive Board – Operations, Baumer Management Services AG and Shyam Warialani, MD, Baumer Technologies India Pvt Ltd, jointly speak about the global and Indian perspective of this deal during a tête-à-tête with Prateek Sur. Excerpts…

HOW IS BAuMER GROuP GOInG TO BEnEfIT fROM THIS BuSInESS DEAL?Baumer is an international group, which deals with the development and production of sensors, shaft encoders, components for automatic image processing as well as mechanical and electronic process instruments. Baumer Technologies India Pvt Ltd comes with a strong base in the business of mechanical process instrumentation in India and abroad. By deploying proven manufacturing processes and quality standards at the Indian manufacturing facility, Baumer can not only produce the best quality process instruments and source them from India but can also enhance and further strengthen its presence in process instrumentation globally. Moreover, Baumer already has a strong segment of sensor products and

Baumer Technologies India Pvt Ltd will combine the expertise from both Europe and India to develop very high quality products. India has tremendous growth potential, and Baumer would like to be part of this growth story. Baumer is not just looking at the low-cost production site but is also eyeing better competency levels.

WHy InDIA?Europe is gradually becoming a very expensive production centre for mechanical process instruments. In order to grow on a global scale, remain competitive and also deliver high-quality products, Baumer had to look for a production hub within Asia. Baumer chose India as it could find the right company here, which is not only very strong with its manufacturing

base but also maintains better quality standards for products. Also, this company has a very wide presence in the Middle East. So, it is a win-win situation for both, the parent company as well as the new subsidiary.

WHAT KInD Of STREnGTH WILL BAuMER BRInG TO BAuMER TEcHnOLOGIES AnD THE InDIAn LOcAL MARKET?Baumer is well known for its best R&D practices and innovative products. India can definitely take advantage of these strengths. Besides, India will also benefit from Baumer’s global supply chain. The acquisition has helped Baumer Technologies in many ways, which includes the implementation of best production practices such as Lean enterprise, Six Sigma and 5S in the Indian production set-up.

Since India is a low-cost production country, we would like to optimise our production by having a base here. However, our intention is not to make products cheaper as Baumer Technologies India Pvt Ltd would concentrate more on high-quality products, so that our customers stand to benefit. Customers’ satisfaction is Baumer’s utmost priority. The customer should get the most reliable and high-quality products.

ARE THERE Any PREDEfInED cOnSIDERATIOnS THAT THE cOMPAny IS KEEPInG In MInD fOR THE InDIAn MARKET?India is growing rapidly. The country not only possesses a good amount of technical brains but also has good set skill levels that will help Baumer to enhance its overall production capabilities and volumes for the global market.

Page 53: Search - February 2013

F E B R U A R Y 2 0 1 3 | SEARCH - THE INDUSTRIAL SOURCEBOOK 53

Shyam Warialani

hold the key for all R&D activitiesThe growing market in India, the Middle East and across the globe requires a combination of electronic and mechanical instrumentation products. The Swiss company Baumer recently acquired the Indian biggie Waaree

Instruments Ltd. Rainer Klug, Member – Executive Board – Operations, Baumer Management Services AG and Shyam Warialani, MD, Baumer Technologies India Pvt Ltd, jointly speak about the global and Indian perspective of this deal during a tête-à-tête with Prateek Sur. Excerpts…

HOW IS BAuMER TEcHnOLOGIES InDIA PvT LTD GOInG TO BOOST BAuMER, THE GLOBAL BRAnD?Baumer Technologies India has a very strong sales and distribution network in the country as well as in the Middle East, which is the most important strength that the Indian subsidiary brings to the Baumer Group. A full-fledged manufacturing facility of process instruments at Vapi is another strong point that the subsidiary adds to the global brand. It also widens the product range in the process instruments segment. Baumer Technologies India has a strong experience in handling private label business globally. This opens up real business opportunities for Baumer Group worldwide. Baumer Technologies India also has a state-of-the-art NABL accredited calibration laboratory, which provides unmatched services to customers over other suppliers. Moreover, both the companies will share the knowledge they possess. There are opportunities for exchange programmes, wherein overseas employees can come to India, train our people and also simultaneously share and learn from their Indian colleagues. Alongside, Indian employees will have an opportunity to travel abroad and learn the best practices at various global manufacturing facilities of Baumer. This practice would benefit the company’s growth as well as offer employees stability and growth prospects.

HOW WILL BAuMER TEcHnOLOGIES InDIA, In TERMS Of SERvED MARKET SEGMEnT, BEnEfIT fROM THIS AcquISITIOn?Baumer Technologies India has been producing mechanical process instruments since many years. The company lacked in the offerings of electronic process instruments. This acquisition brings an excellent business

growth opportunity for the company. In addition, Baumer brings the tag ‘Original Bourdon’, which will further strengthen the company’s mechanical product portfolio.

WHAT IS THE cOMPAny’S MAnTRA TO MAInTAIn A cOMPETITIvE EDGE OvER OTHERS In InDIA?Baumer Group is very strong in the electronic range of PI besides innovation in sensor technologies. With the complete product basket, Baumer Technologies India would be the only company to offer the mechanical & electronic range of PI along with innovative sensor solutions. Incorporation of Lean, Six Sigma principles will provide a boost to the production and logistics processes which, in turn, will provide better quality products from India.

HOW DOES THE cOMPAny PLAn TO ADOPT A LOcALISED APPROAcH fOR THE InDIAn MARKET AnD On THE ExPORT fROnT?Baumer Technologies India, erstwhile Waaree Instruments Ltd, already has a good sales and distribution network for the domestic market. With Baumer taking over, the company will now focus on expanding the product bandwidth and will also focus on the EPC market and end users. Baumer Technologies India has been receiving export award (EEPC) for seven consecutive years. Our growth towards exports is going to multiply now with Baumer’s trademark. The company is looking forward to supplying good quality components and some complementary products to other group companies, apart from the existing customers who are supplied private labelled products. [email protected]

Page 54: Search - February 2013
Page 55: Search - February 2013

F E B R U A R Y 2 0 1 3 | SEARCH - THE INDUSTRIAL SOURCEBOOK 55

productivity initiatives

productivity initiatives: tracking awareness Levels of sMes ..............................................56

innovation & technoLogies: the road to safety and security .........................................58

industry hazards: safety: a remedial Measure ......................................................................62

Page 56: Search - February 2013

productivity initiatives

56 SEARCH - THE INDUSTRIAL SOURCEBOOK | F E B R U A R Y 2 0 1 3

ArindAm Ghosh

O ver a period of time, it has been acknowledged that globally implementing effective safety and health practices in organisations

have a positive impact on companies’ productivity, and results in the economic and social upliftment of the said companies. It helps in preventing human suffering and economic costs incurred by workers and results in higher productivity besides fostering a healthy working environment.

According to the Planning Commission, around 94% of the workforce is employed in the unorganised sector and there is an urgent need to protect its interest by

providing people with the minimum living wage, improved regulatory activities, basic social security & labour welfare schemes and improved health & safety facilities. The living standards of this segment of the workforce need urgent attention since the workers in this sector have no job security and are often deprived of the basic rights under various labour laws.

This has created a huge demand for safety solutions with a lot of companies entering this field and taking various initiatives to make their products credible. Highlighting the safety norms followed while developing safety and security systems, Prateek Verma, Sales Director, Vantage Integrated Security

Solutions (P) Ltd, says, “Vantage, being a market leader in innovation, technology adoption and trendsetting, follows all the required safety norms that are practiced globally. We comply with international standards and certifications such as CE, FCC, UL and ISO 9001. We also make sure that all our products go through rigorous quality checks before reaching the customers and also that the systems supplied by Vantage are foolproof.”

AWARENESS LEVELS OF SMEsCommenting on the awareness levels of SMEs, Verma says, “The last decade has seen a massive change in the security, public safety and surveillance industry

According to the Indian Labour Organization (ILO), an estimated 1.2 million workers lose their lives annually due to work-related accidents and diseases. Further, 250 million occupational accidents and 160 million work-related diseases occur each year. The economic loss from these is estimated to be a whopping 4% of the world’s gross national product. Consequently, there is a huge demand for safety and security solutions not only in India but all across the globe. Further, industry experts claim that over the last five years, safety & security products have recorded 35% growth and the trend is expected to continue in India over the next 10–15 years.

Page 57: Search - February 2013

F E B R U A R Y 2 0 1 3 | SEARCH - THE INDUSTRIAL SOURCEBOOK 57

productivity initiatives

throughout the globe and across all industries. This is primarily due to rising awareness, terrorist activities and need for a better overall control system with regard to security. It has been the same even for SMEs in India, especially over the last five years that witnessed a surge in the demand for security systems. CCTV, access control, people screening and detection systems have the most demand within SMEs. We have seen an average growth of 35% for such solutions over the last five years. The same is expected to be steady for the next 10–15 years in India.”

According to The Associated Chambers of Commerce and Industry of India (ASSOCHAM), the video surveillance and CCTV camera market in India is likely to reach `2,200 crore by 2015. The Indian CCTV camera market is currently valued at about `1,000 crore and accounts for over 40% of the `2,400-crore electronic security market in India. Globally, the CCTV and video surveillance market is growing at a CAGR of about 25% and is currently valued at about `80,000 crore. Also, it is likely to cross the `1.5 lakh-crore mark by 2015. Asia accounts for nearly 35% of the global CCTV market with a share of over `27,000 crore. Highlighting the importance of safety, Mrinal Vohra, CEO – India, Bangladesh & Sri lanka, GE Oil & Gas, says, “Protecting the environment and the health & safety of employees is mandatory and GE believes that it is also the right thing to do. Through management leadership and employee commitment, GE conducts its operations in a manner aimed at minimising the environmental impact. Our company implements various processes to systematically manage the environment, occupational health and workplace safety impacts of its operations and products in accordance with the applicable legal and country requirements, best practices and customer mandates.” He adds, “GE implements programmes

to conserve natural resources, reduce waste and emissions in order to minimise the environmental impact where it is practically possible. Last, but not the least, GE consults its employees and continually evaluates and updates its EHS programmes to ensure improvement.” With respect to global comparison, Verma says, “If you compare the awareness levels with those of developed nations such as the US, the UK and Australia, we are still far behind because in these countries, you will hardly find any SME that has not implemented such systems. On the other hand, compared to other developing nations, we are at the forefront. Burglaries are common in India. So, we need to be more aware and prepared. I believe that by 2020, we will be at par with the developed

nations in terms of every SME having such systems installed.”

INITIATIVES TAKENMany companies make it mandatory for workers to wear specific protective clothing when they work in factories. They are specially designed suits that offer protection from fire and extreme heat in the factory, especially for those who work in metal industries. Some of the major norms followed in the manufacturing of various security systems include the implementation of quality motion sensors. This is one of the core components of the security alarm and safety system. Higher quality of sensors ensures higher efficiency levels.

Further, there are other protection systems implemented by companies, which help in securing the data stored and protecting it from damage. The usage of wireless smoke detection systems is also popular with SMEs; these smoke detectors use state-of-

the-art remote sensing technology that detects smoke and raises a loud and clearly audible fire alarm. Elaborating on the initiatives taken at GE, Vohra says, “GE’s Environmental Health & Safety (EHS) programme focuses on providing suitable and sufficient resources along with appropriate procedures to recognise, evaluate, assess and manage potential EHS risks in its operations. We consider and address the EHS impacts when designing, manufacturing, testing and servicing the products to meet or exceed recognised industry EHS standards.” Verma also pointed out that awareness will play a critical role in promoting the usage of safety and security solutions. He says, “It is important to create awareness about how people can benefit by using such systems and help their businesses

circumvent thefts & pilferage at their workplace. Also, we need systems that suit the Indian scenario and need to make sure that the right products are being

focused on when bringing them to the market.”

The government has taken certain initiatives that are aimed at improving productivity and strengthening the competitiveness of workers. Some of the steps include the establishment of ITIs and skill development centres. The government has launched the Rashtriya Swasthya Bima Yojana that provides smart card-based cashless health insurance cover to families comprising five members below the poverty level. Around 93 lakh smart cards have been issued under this scheme. However, if the government can introduce a regulatory framework for the adoption of good Personal Protective Equipment (PPE) and put in place a basic set of safety practices to be followed by workers, especially for those who work in factories, it will offer a big boost towards creating a safe work environment for workers.

[email protected]

The government has taken initiatives such as the establishment of ITIs and skill development centres to

improve the productivity and strengthen the competitiveness of workers.

Page 58: Search - February 2013

InnovatIon & technologIes

58 SEARCH - THE INDUSTRIAL SOURCEBOOK | F E B R U A R Y 2 0 1 3

Suprita anupam

T he standard implication of industrial safety and security has widened from the safety of men at work and security of plant

to cyber safety and security of complex network operations such as handoff, IP address and mesh infrastructure point-of-access. Building cross-layer switching frameworks to completely hide these operations from user devices like cameras and Voice over

Internet Protocol (VoIP) phones has become a part of the safety and security process. Today, industrial safety and security at workplaces include security, occupational safety, risk management, cyber safety & security as part of its major agenda. While the adoption of all the available advancements depends on contrasting parameters such as need for a security programme, insurance costs, safety legislation and implementation of

various measures, let us discuss some of the recent technological innovations in these fields.

UNATTENDED GROUND SENSORS (UGS)Initially developed for defence purposes, UGS is now being adopted by industries to protect remote perimeters, including assets and infrastructure. The technology provides critical intelligence worldwide by efficiently detecting, identifying and transmitting real-time data to key operational personnel and centres. This has lowered the risk activity to a firm’s personnel on the field and in operations centres in an efficient and cost-effective manner. The sensor systems use passive infrared, seismic and magnetic detectors and transmit data by utilising a variety of techniques including satellite, radio frequency and wireless communications. Further, the system can be integrated with multiple manufacturers’ sensor systems and geo-spatial toolsets, including Google Earth.

LASER GRAB/FENCE GRABBER SYSTEMSThese two systems provide intrusion detection capability. Laser Grab, which consists of laser radar, detects obstacles and takes images of the detected intrusion. The images are then sent through wireless communication to the desired location. Initially developed by a Swedish company, Laser Optronix, for transportation purposes, the technology finds its application in handling operations. The system can be well equipped with an alarm system and other control programmes as per the expected obstacle signals. They can automate a major part of the security programme. Whenever the system finds any intrusion, it will generate an alarm of a particular

When adopting safety and security measures, the adoption of security system design, specification preparation, risk management and latest safety equip-ment matters, but equally important is the approach towards the adoption of these services. This is because 99% of the achievement does not count, but the failure of 1% does. Only the adoption of the latest tech-innovations can prevent such a failure.

Page 59: Search - February 2013
Page 60: Search - February 2013

InnovatIon & technologIes

60 SEARCH - THE INDUSTRIAL SOURCEBOOK | F E B R U A R Y 2 0 1 3

frequency (as per the detected intrusion) and the control system will instruct accordingly as programmed.

CYBER SECURITY Almost all the major companies have moved from on-paper operations to on-computer/online operations. The need for cyber security has also increased with time. To be integrated with a series of soft solutions, it must be implemented as an end-to-end global cyber security assurance system. As shown in the Table 1, the system must include virus protection; firewalls to build, maintain and monitor; risk assessments & audit conformance evaluations; software compliance reviews for best practices & education and information protection & encryption. Ren Zhengfei, CEO, Huawei Technologies Co Ltd, points out that cyber security is a part of Huawei’s policy on a real time basis. Elaborating on Huawei’s future policy, he averred, “In terms of business processes, security assurance shall be integrated into all business processes relating to R&D, supply chain, sales and marketing, delivery and technical services. Such integration, as the fundamental requirement of the quality management system, will be implemented under the guidance of management regulations and technical specifications. In addition, Huawei will reinforce the implementation of the cyber security assurance system by conducting internal auditing & receiving external certification and auditing by security authorities or independent third-party agencies. Furthermore, Huawei has already been certified with the BS7799-2/ISO27001 accreditation in 2004.” He added, “With respect to personnel management, our employees, partners and consultants are required to comply with cyber security policies and requirements made by Huawei and

receive appropriate training so that the concept of security is deeply rooted throughout Huawei. To promote cyber security, Huawei will reward employees who actively participate in cyber security assurance and will take appropriate action against those who violate cyber assurance

policies. Employees may also incur personal legal liability for the violation of relevant laws and regulations.”

AN ARRAY OF SOUND, TEMPERATURE AND VISION SENSORSTexas Instruments (TI) has developed sensor fusion, a rapidly advancing technology with enough intelligence to decide whether an input justifies taking action or was just something going bump in the night. It enables a smartphone to integrate input from a magnetometer, a gyroscope and an accelerometer on all three axes.

Jeremiah Golston, a TI Fellow, commented, “We are on the cusp of having the technology that could make this sensor fusion a reality. A lot of what TI has done over the years has been to develop innovative technology that enables innovation by others. I think this will continue here as many programmers and design engineers develop uses for this technology. We cannot even anticipate all the applications they might come up with for sensor fusion technology. The next-generation Digital Signal Processors (DSPs) are key enablers of such sensor fusion, especially owing to their ability to handle input from many sensors at once.”

LEAVING NO STONE UNTURNEDEnsuring safety and security in and around a firm is a continuous process and so is its implementation. Dr Peter Ryan, Principal Security Advisor to the International Olympics Committee, highlights, “The good news is that technology is improving rapidly and some of the failures identified from past experience are being addressed. New and more intelligent systems are being produced and deployed as part of a totally integrated security plan and risk mitigation strategy.”

[email protected]

Security Security system design and

specification preparation Security surveys Policy and procedure—

development and review Security management services Security contract—award process

and review Significant incident review Crime Prevention Through

Environmental Design (CPTED) audits

Security officer selection and training

Event security VIP and executive protection

planningOccupational Safety Workplace violence planning and

instruction Fire Warden/Marshall Training WHMIS training Fire extinguisher training

Risk Management Risk assessments Insurance review Broker selection and review Contract risk review Claim review Disaster recovery and business

continuity planningComputer & Information Systems Virus protection Firewalls—build, maintain and

monitor Risk assessments and audit

conformance evaluations Software compliance reviews—

best practices and education Information protection and

encryption

Table 1: IndusTrIal SAFETY & SECURITY

Page 61: Search - February 2013
Page 62: Search - February 2013

62 SEARCH - THE INDUSTRIAL SOURCEBOOK | F E B R U A R Y 2 0 1 3

Industry Hazards

fire at a textile factory in Karachi in October 2012 killed almost 300 workers. Earlier, in November 2012, more than 100

people died in a fire at a garment factory outside Dhaka, Bangladesh’s national capital, in one of the worst industrial tragedies in that country. Closer home, the rather infamous Bhopal gas tragedy in the 80s is still considered as one of the worst

industrial disasters in human history. Such tragedies has given a severe lesson to all the companies in terms of implementing quality safety and security solutions to ensure a healthy and safe working environment for workers in the factory. Companies are taking initiatives towards integrating the value

of safety and security with their overall objectives, vision and values.

INDUSTRIES PRONE TO HAZARDSCommenting on the importance of safety and security, Ravindra Kishore Sinha, CMD, Security and Intelligence Services India Ltd, avers, “Who can forget the Bhopal gas tragedy in 1982? It happened because the management team did not allow shutting the factory for 24 hours for maintenance, which

was pending since a few weeks.” Highlighting the limitations of SMEs, he explains, “For big companies, it is easy to form an executive team to look at all these matters, but not for SMEs, most of which have irreversible methodology in profit making, where a slight addition to their cost may lead to

losses instead of profit.” Further, highlighting the importance

of the solutions required for industries, TP Singh, Director – Sales (India, Srilanka, Bangladesh, Nepal and Bhutan), Commercial Systems, FLIR Systems India Pvt Ltd, says, “We make thermal imaging cameras and thermal imaging or infrared thermography is a highly preferred tool while planning a preventive maintenance schedule for any industry.” He adds that since

thermal imaging cameras work on the principle of heat, these units can be used in almost all types and parts of the industry. However, for certain industries, safety is of utmost importance, some of which include oil & gas, chemical, textile and power. Oil and Gas: It plays a critical role in

A ArindAm Ghosh

Over a period of time, safety has emerged as an important subject for companies looking to maintain a safe work environment. However, for sectors like oil & gas, nuclear, coal and textile, safety and preventive maintenance are of utmost importance because they primarily handle materials and end products that are prone to high levels of risk and hazards. In order to tackle such industrial hazards as well as ensure a healthy working environment, companies are opting for various remedial measures like implementing automation solutions at the shop floor, organising regular meetings & workshops on safety, appointing specialised personnel and rewarding employees who follow safety norms.

Safety: A Remedial Measure

Page 63: Search - February 2013
Page 64: Search - February 2013

64 SEARCH - THE INDUSTRIAL SOURCEBOOK | F E B R U A R Y 2 0 1 3

Industry Hazards

meeting the energy requirements and a small negligence can cause immense destruction to infrastructure, human lives, property, etc. There is need for a completely holistic view of the security threats across all the facilities to have a safe and secure environment and an uninterrupted process. Nuclear: Countries like Germany do not encourage power generation from nuclear sources because of the level of damage associated with nuclear power and India’s N-Power programme follows one of the highest safety standards. The Nuclear Power Corporation of India Ltd (NPCIL) is primarily responsible for safety, and the Regulatory Body—Atomic Energy Regulatory Board (AERB)—in India oversees and ensures safety. It is ensured that a Nuclear Power Plant (NPP) is located at a carefully selected site, keeping safety, security & environment protection in mind. The design of NPPs is based on several concepts to ensure safety of operation. The highest standard of quality assurance is adopted during subsequent manufacturing of equipment, construction activities and commissioning. Further, the activities in all these stages are reviewed, licenced through stipulations, enforced and inspected by AERB. All reviews are detailed and comprehensive based on AERB safety documents, including codes that are based on International Atomic Energy Agency (IAEA) documents, thus adopting the current international standards and best practices. Coal: Unless coal mines remain totally safe, it is difficult to reach increasing production. Coal companies are taking measures such as encouraging participation from workers in improving safety management through various bodies at the mine, area, subsidiary (HQ) and CIL levels as well as regular safety audits of mines by experienced engineers to make mining work safer.

Further, on the global level, safety for coal mining in China is an important issue as the number of fatalities is high. The Chinese authorities are working on various fronts to improve their performance, close unsafe mines and encourage best global practice.Textile: In the past two years, some of the major industrial accidents have occurred in the textile sector, for instance in Bangladesh and Pakistan. Safety from fire is a critical issue for this sector. The garment industry, which employs more than 3.5 million workers, mostly women, is Bangladesh’s lifeline, but the working conditions in many factories under this industry are very poor. Under such a scenario, the government is taking various steps to ensure better safety of workers.

CORRECTIVE MEASURES TAKENWhile almost every industry is doing its best to implement the best possible safety practices, there are certain crucial steps followed by the industry to ensure that a healthy and safe working environment is continuously maintained as well as improved.Meetings: Organising regular meetings and workshops is becoming a common practice among various companies. It is primarily meant to spread awareness on the latest techniques to maintain safety and take constant updates on the practices being followed in this direction. Safety compliance officers: Leading companies are today appointing highly specialised officers and superiors to keep a strict eye on all the rules and regulations related to safety and security. Companies like L&T and Tata have taken measures to appoint quality professionals to look into this aspect.

Giving rewards: Another step that can come as a huge boost in maintaining safety and security is rewards as this will motivate employees to follow the rules and implement safety. Automation: Many companies are slowly and steadily opting for automation solutions as they not only increase their competitiveness in terms of being productive and efficient but also reduce the risk to operators. These steps play a critical role in enhancing the awareness level of workers as well as leads to higher speed and precision of work while ensures better safety of the product.

Commenting on the Indian market, Singh expounds, “As compared to the rest of the world, India is still growing. The biggest challenge here is awareness.

When the factory or plant maintenance manager and management understand the usefulness of this technology, they start using it on a regular basis and reap very good benefits.” He adds, “The Indian

industry has huge potential for growth with the growing level of awareness for the implementation of solutions.” In addition, highlighting the commitment on this front, Sinha says, “As far as the government’s commitment is concerned, it has achieved a landmark by passing the Private Security Agencies (Regulation) Act of 2005.”

The industrial safety and security market in India has dramatically changed over the last decade or so. Although the concept of industrial safety was in existence since long, it is only in the last few years that the industry has strongly moved in this direction and implemented it religiously. A policy initiative towards statutory compulsion will prove useful to further promote and encourage the usage of such solutions across many other industries in the country.

[email protected]

As part of the policy initiative to maintain safety and security, the Ministry of Petroleum & Natural Gas constituted Oil

Industry Safety Directorate (OISD) in 1986 to enhance the safety levels in the hydrocarbon industry. This move has

immensely benefitted from standardisation and safety audits work done by OISD.

Page 65: Search - February 2013

SEA

RC

H -

Feb

uary

201

3 A

d N

ame:

FL

IR

Pg

No.

65

Page 66: Search - February 2013

SEA

RC

H - Febuary 2013 A

d Nam

e: Hi-Fab Pg N

o. 66

Page 67: Search - February 2013

F E B R U A R Y 2 0 1 3 | SEARCH - THE INDUSTRIAL SOURCEBOOK 67

New eNgiNeeriNg discoveries

New eNgiNeeriNg discoveries: Beckoning A New era of Advanced Materials science ......68

5 New eNgiNeeriNg MAteriAls: slated to Bring About transformation..................................70

MAgic MAteriAls: spending on innovation is the Key ...............................................................74

Page 68: Search - February 2013

68 SEARCH - THE INDUSTRIAL SOURCEBOOK | F E B R U A R Y 2 0 1 3

New eNgiNeeriNg discoveries

GRAPHENEGraphene electronics was officially invented at the Georgia Institute of Technology in 2003 after experimental and theoretical research on graphene properties starting from 2001. Graphene electronics was originally conceived as a new electronics paradigm to incorporate the room-temperature ballistic and coherent properties of carbon nanotubes in a patternable electronic material. Other electronics schemes involving transferred (exfoliated and chemical vapor deposition-produced) graphitic materials, which operate in the diffusive regime, may not be competitive with standard methods and may therefore, not significantly impact electronics.

In the recent years, epitaxial graphene has improved to the point where graphene electronics, according to the original concept, appears to be within reach. Beyond electronics, epitaxial graphene research has led to important developments in graphene physics in general and has become a leading platform for graphene science as well.

Graphene belongs to the class of 2-dimensional materials. It consists of a hexagonal array of sp2-bonded carbon atoms, just like those found in bulk graphite. 2D materials display very interesting properties and are fundamentally different from the 3D materials encountered everyday. The discovery of 2D materials means that scientists now have access to materials of all dimensionalities, including 0D (quantum dots, atoms) and 1D (nanowires, carbon nanotubes).

This ultra-tough, ultra-thin form of carbon, which is just one atom thick and is made of sheets of carbon atoms linked in chicken-wire fashion into arrays of hexagons, has been touted as the next big thing: the future of electronics and touchscreens, a flexible fabric for smart clothing and the electrodes of energy storage devices. It is a British discovery (sort of), and George Osborne has announced a £22m-funding for commercialising graphene, the isolation of which won the 2010 Nobel prize in physics for two physicists at the University of Manchester.

SEMICONDUCTOR PHOTOCATALYSISSemiconductor Photocatalysis has received much attention as a potential solution to the worldwide energy shortage and for counteracting environmental degradation. Many of the recent advances in photocatalysis have been realised by the selective control of the morphology of nanomaterials or by utilising the collective properties of nano-assembly systems.

SOFT LITHOGRAPHYSoft lithography is a material processing technique that allows microstructures to be produced for data systems and microelectronics without relying on the more elaborate and

Nishi Rath

As one looks back and reflects on the past few years, what is most astounding is the number of discoveries in the area of material science, which have significantly altered the manufacturing scenario. Here’s taking a look at a few such discoveries that have great prospects in the future…

According to the Thomson Reuters Global Research report, Materials Science and Technology, India occupies the sixth position globally and is one of the leading countries in the Asia Pacific region in terms of research output in material sciences. According to the report, China leads with 55, 003 scientific papers, followed by the US (38,189), Japan (25,473), Germany (16,832), South Korea (15,261) and India (12,693).Materials science and technology is a core area of research for many economies due to its potential contributions to manufacturing processes and innovative products, and Asia, including India, is leading in this area of research, the report said. The history of technology is replete with important examples of revolutionary change brought on by the discovery of new materials and new uses for materials. Bronze gave way to Iron, then to Steel and arguably now, to Silicon.Will graphene replace silicon in electronics? Will cars be fuelled by hydrogen stored in Metal-Organic Frameworks (MOFs)? Will stem cells grown on nano-fibrous scaffolds make organ replacement routine? The fact that we can pose these questions says something about recent advances in materials science and technology, the study says.

IndIa stands 6tH in terms of reseArcH output In materIal scIences globally

Beckoning a new era of advanced materials science

Page 69: Search - February 2013

F E B R U A R Y 2 0 1 3 | SEARCH - THE INDUSTRIAL SOURCEBOOK 69

New eNgiNeeriNg discoveries

expensive photolithography method. By transferring molecules onto a substrate using a contact stamp, soft lithography provides for a cheap and accurate

alternative for printing solid materials, even on nanoscale

projects. Biologists have also employed this method to take

snapshots of white cell groups in order to study specific immune system

functions.

METAMATERIALSConstructed from artificial particles smaller than

light wavelengths, metamaterials exhibit a negative refractive index that causes light to bend around an object. This could, in theory, render an object invisible. For example, unlike existing technology, which reduces an aircraft’s radar profile, metamaterial cloaking would cause waves to bypass their target entirely, making a vehicle invisible even to the human eye. This makes it a potential military application. While major applications for such technology are still projected for years down the road, it would not be far-fetched to expect metamaterials and cloaking technology to appear in our lifetime—though we may not see them coming.

NANOMATERIALSProducts that incorporate nanomaterials in one form or another include computer processors and hard drives, mobile phones, home appliances, automotive components, medical instruments and even cosmetics. In addition to its potential in construction and electronics, new applications for nanotechnology have opened up avenues for the melding of biology and high-tech manufacturing. Microscopic carbon nanotubes, similar to the ones found in buckypaper, have been used to target cancer cells within the human body.

Potential military applications might be the most ‘sci-fi’ of nanotechnology developments. Some defence contractors are investing in nanomaterial research to develop vehicles that could theoretically ‘heal’ themselves after being damaged.

ADVANCEMENTS IN POWDER METALLURGY It is the process of blending fine powdered materials, pressing them into the desired shape or form (compacting) and heating the compressed material in a controlled atmosphere to bond the material (sintering). The powder metallurgy market is motivated by numerous technological improvements and breakthroughs, which have helped spruce up the demand for P/M components in new industrial applications. The application possibilities of powder metallurgy are fast

expanding beyond the traditional automotive industry into diverse fields such as communication technology, medical diagnostics and metrology.

With plastics being increasingly used as substitutes for tiny P/M gears and components, the use of powder metallurgy is gradually shifting towards the manufacture of sophisticated engineered parts, which require increased strength and above-average density. A direct fallout of the trend is the rising demand for high-density powdered metals. The blistering pace of developments in computers and electronic components is expected to increase the demand for titanium- and aluminum-base powder metallurgy. An increased interest in the potential of nanopowders is expected in the future.

SUPERPLASTIC FORMINGSuperplastic Forming (SPF) is a valuable tool for the fabrication of complex parts used in the aircraft and automobile industries. The SPF of sheet metal has been used to produce very complex shapes and integrated structures that are often lighter and stronger than the assemblies they replace.

SPF can produce parts that are impossible to form using conventional techniques. During the SPF process, the material is heated to the SPF temperature within a sealed die. Inert gas pressure is then applied at a controlled rate, forcing the material to take the shape of the die pattern. The flow stress of the material during deformation increases rapidly with the increasing strain rate. Superplastic alloys can be stretched at higher temperatures by several times of their initial length without breaking. This process, typically conducted at high temperature and under a controlled strain rate, can ensure a ten-fold increase in elongation as compared to conventional room temperature processes.

[email protected]

Interestingly, the Indian Institute of Technology is placed 20th worldwide in terms of institutions ranked by citations in materials science research. These findings are based on a study of over 11,500 journals and tracking of the growth of materials science research outputs—substantive articles and reviews over three decades from 1981. Materials science now accounts for nearly 60,000 articles and reviews per year, representing about 5% of all such papers in the sciences indexed in the web of science. Comparatively, chemistry represents 11.5%, while engineering and physics represent 9% each. The interesting areas of materials that are growing are around the nano-science front, which serves as the bridging area between physics and chemistry. Other major research fronts close to materials are solar cells, fuel cells and polymerisation, said the report.

IIt ranked 20tH globally

Page 70: Search - February 2013

70 SEARCH - THE INDUSTRIAL SOURCEBOOK | F E B R U A R Y 2 0 1 3

5 New eNgiNeeriNg Materials

here are umpteen contenders to the list of new engineering materials, but the five that top the list are advanced

new composites such as carbon fibre reinforced polymers, nanotechnology-based new combinations, bioplastics, magnetic refrigeration materials such as Gadolinium & its alloys and Magneto-Rheological (MR) fluid. These five new engineering materials and techniques seem to possess the ability to transform our engineering approach, which is due for a sea-change soon. Here’s taking a look at these engineering materials:

AdvAnced new composites such As cArbon fibre reinforced polymersThe most advanced passenger aircraft, the Boeing 787 ‘Dreamliner’, is quieter, environment-friendly and passenger-friendly as well. These traits were successfully achieved thanks to the groundbreaking capabilities of advanced new composites such as carbon fibre

reinforced polymers. Other examples of where this new engineering material has found applicability include the entire wing structure of A-350, which is made up of carbon fibre-reinforced material. Also, the high-end luxury sports car Lamborghini has an indestructible body [familiar to us as the Reinforced Carbon Carbon (RCC)]. Another prominent example includes the light gray material, which withstands re-entry temperatures up to 1,510°C (2,750°F) and protects the Space Shuttle’s wing leading edges and nose cap.

nAnotechnology-bAsed new combinAtions Examples of these would include lightweight metals and their alloys processed through nanotechnology. These materials employ very special methods for manufacturing, thereby lending them special physical properties.

bioplAstics These are a form of plastics derived from renewable biomass sources such

as vegetable fats and oils, corn starch, pea starch or micro-biota. Common plastics, such as fossil fuel plastics, are derived from petroleum. These plastics rely more on scarce fossil fuels and produce more greenhouse gas. Some bioplastics are designed to biodegrade and can break down in either anaerobic or aerobic environments, depending on how they are manufactured. Some common applications of bioplastics include packaging materials, dining utensils, food packaging and insulation.

mAgnetic refrigerAtion mAteriAls such As gAdolinium And its Alloys The Magneto-Caloric Effect (MCE, from magnet and calorie) is a magneto-thermo-dynamic phenomenon in which a change in temperature of a suitable material is caused by exposing the material to a changing magnetic field. This is also known as adiabatic demagnetisation, due to the application of the process specifically to create a temperature drop and refrigeration

t

lightweight, more dense, environment-friendly, user-friendly and economical are some of the considerations that are given utmost priority today while developing new engineering materials. formerly, most of the hi-

tech materials developed found their applicability in everyday use. space sciences and super performance aerospace vehicles or formula one racing cars have shown engineers the way forward. once the exotic

materials get to mass manufacturing with high quality, a new world opens up… An exciting future awaits us.

Page 71: Search - February 2013

F E B R U A R Y 2 0 1 3 | SEARCH - THE INDUSTRIAL SOURCEBOOK 71

5 New eNgiNeeriNg Materials

without the need for compression and with more energy efficiency as seen in refrigerators, air conditioners and spacecraft.

mAgneto-rheologicAl (mr) fluid This is a type of smart fluid in a carrier fluid, usually a type of oil. When subjected to a magnetic field, the fluid greatly increases its apparent viscosity to the point of becoming a visco-elastic solid. Importantly, the yield stress of the fluid when in its active (‘on’) state can be controlled very accurately by varying the magnetic field intensity. The upshot of this is that the fluid’s ability to transmit force can be controlled with an electromagnet, which gives rise to its many possible control-based applications. Ferrofluid particles are primarily nanoparticles that are suspended by Brownian motion and generally will not settle under normal conditions. As a result, these two fluids have very different applications. Let’s assess them individually: Carbon fibre-reinforced carbon or

carbon–carbon (C/C): This is a composite material consisting of carbon fibre reinforcement in a matrix of graphite. Carbon exists on our planet in various forms, among which graphite is one of its softer varieties (carbon being hard). The hardest morphological form of carbon is, of course, the diamond. Today, it is seen as the material for the nose cone and wing leading edges of the Space Shuttle Orbiter. It has been used in the brake systems of Formula 1 racing cars since 1976; C/C brake discs and pads are a standard component of Formula One brake systems.

C/C is well-suited structural applications at high temperatures, or where thermal shock resistance and/or a low coefficient of thermal expansion is needed. While it is

less brittle than many other ceramics, it lacks impact resistance; Space Shuttle Columbia was destroyed during atmospheric re-entry after one of its RCC panels was broken owing to the impact of a piece of foam insulation from the Space Shuttle External Tank. This catastrophic failure was due in part to original shuttle design requirements, which did not consider the likelihood of such violent

impacts. Additionally, C/C brake material is used in Bugatti Veyron luxury cars, which is a division of Volkswagen in Germany and also used by Ferrari super-performance Formula 1 racing cars.

Nanotechnology-based manufacturing: This has proliferated across a wide gamut of techniques as far as engineering materials are concerned. Lightweight metals such as aluminium, beryllium and titanium are ideally sought-after because such alloys when nano-manufactured have the dual-edged benefit of being lighter and stronger than the best steels. Titanium alloys wrongly seem like space-age material ideal only for aerospace applications, because it is quite popular in many metallurgical and bio-medical implant fields.The diversity in the formation

of functional materials for medical

implants, including the principles of material choice on the criteria of their biochemical and biomechanical compatibility and their technological effectiveness, are well known. Titanium alloys are considered the most prospective and extended materials for implants in traumatology, orthopaedics and stomatology. Traumatology is the study of wounds and injuries caused by accidents or violence to a person, and the surgical therapy and repair of the damage. It is often considered as the sub-set of surgery and in countries without the specialty of trauma surgery, it is most often a sub-specialty to orthopedic surgery. Traumatology may also be known as accident surgery. Stomatology is the branch of medicine and dentistry relating to the mouth and mouth disease.

The trend over the last decade has been to exclude alloying components that may cause local allergic reactions on living tissues or general toxic effects on an organism from the structure of titanium alloys. One compromise to preserve high biochemical compatibility with the necessary increase in the mechanical properties of titanium alloys is based on the formation of Sub-Micro Crystalline (SMC) or Nano Structured (NS) states in commercially pure titanium.

smc titAnium Alloys There is a clear-cut methodology employed in producing high-strength SMC and NS-type titanium alloys. The technology is employed usually at a workshop with suitable equipment for pilot production of bars (diameter 5.5–10.0 mm and length 1 m and more) of nanostructured and sub-micro-crystalline VT1-0 titanium. The method involves the treatment of initial titanium bars through severe plastic deformation involving multiple uni-axial pressing in a mould or abc-pressing, multi-pass rolling and low-temperature annealing. The technology ensures specified nano-structural or sub-micro-crystalline states in titanium, its homogeneous

Advanced machining tools made from CC-R

The Veyron’s brakes use cross drilled, radially vented carbon fibre reinforced silicon carbide (C/SiC) composite discs, manufactured by SGL Carbon, which have a much greater resistance to brake fade when compared with conventional cast iron discs.

Page 72: Search - February 2013

72 SEARCH - THE INDUSTRIAL SOURCEBOOK | F E B R U A R Y 2 0 1 3

5 New eNgiNeeriNg Materials

structure throughout the volume of a bar with a characteristic grain and subgrain size up to 100 nm and less, and an increase in the mechanical properties of titanium to the level of medical Ti alloys like VT-6, VT-16 alloys. This is a Russian technology development.

The prospect of using SMC and NS titanium as a material for manufacturing implants is proven. An analysis of the results of experimental and theoretical research of the diffusion features on inter-granular areas is carried out, and the role of diffusion-controlled processes in the formation of a microstructure of metals and alloys, as well as the micro-structured state, is discussed. The efficiency of computer simulation on an atomic level in establishing the dependence of diffusion characteristics on inter-granular areas from the average grain size and the structural state of internal boundaries of section is proven.

Ni-Ti alloys (or ‘Nitinol’) shape memory alloys that can ‘remember’ a particular shape at a pre-determined temperature have also been refined via the SMC and NS routes. Ultrafine Grained (UFG) NiTi shape memory

alloy shows enhanced mechanical performance attributed to different grain structures from their Coarse Grained (CG) counterparts. In particular, for NiTi and its hard-to-work alloys, grain refinement using Severe Plastic Deformation (SPD) techniques such as equal-channel angular pressing and high-pressure torsion increases the alloys’ recoverable strain and cyclic reversibility.

However, one of the major problems that should be solved to make widespread application of UFG NiTi-based alloys feasible on an industrial scale is that SPD techniques are inherently wasteful because a high level of strain is needed to complete the whole process. One feasible way to reduce the grain size of NiTi-based alloys is to exploit morphological change from fine martensite to fine austenite microstructure during reverse phase transformation of deformed martensite microstructure. Nanoparticles Nanoparticles exhibit a number of special properties relative to bulk

material. Ferroelectric materials smaller than 10 nm can switch their magnetisation direction using room temperature thermal energy, thus making them useless for memory storage. Suspensions of nanoparticles are possible because the interaction of the particle surface with the solvent is strong enough to overcome differences in density, which usually result in a material either sinking or floating in a liquid. Nanoparticles often have unexpected visual properties because they are small enough to confine their electrons and produce quantum effects. For example, gold nanoparticles appear deep red to black in solution.

The often very high surface area to volume ratio of nanoparticles provides a tremendous driving force for diffusion, especially at elevated temperatures. Sintering is possible at lower temperatures and over shorter durations than for larger particles. This theoretically does not affect the density of the final product, though flow difficulties and the tendency of nanoparticles to agglomerate do complicate matters. Nanocomposites A nanocomposite is a multiphase solid material where one of the phases has one, two or three dimensions of less than 100 nanometers (nm), or structures having nano-scale repeat distances between the different phases that make up the material. The mechanical, electrical, thermal, optical, electrochemical, catalytic properties of the nanocomposite will differ markedly from that of the component materials. Size limits for these effects have been proposed, <5 nm for catalytic activity, <20 nm for making a hard magnetic material soft, <50 nm for refractive index changes, and <100 nm for achieving super-para-magnetism, mechanical strengthening or restricting matrix dislocation movement.

MAK Babi, Advanced Trainer – Metallurgy Email: [email protected]

Mechanical Characteristics Of Titanium And Its AlloysMaterial S0,2 MPa SB, MPa S0, MPa d, % Hm, MPaCoarse-grained VT1-0 titanium 270 400 280(105cycles) 23 1700Submicrocrystalline VT1-0 titanium 900 1000 - - 2700Nanostructured VT1-0 titanium 1100 1160 280(2×106cycles) 6 3300Grade 4 titanium (USA) 480 550 - 15 4200VT-6 alloy 1010 1100 570 >6 3500VT-16 alloy 1000 1050 - >10 3400S0,2 - yield strength; SB - ultimate strength; d - tensile ductility; S0 - fatigue limit; Hm - microhardness.

Nanostructured and sub-micro-crystalline VТ1-0 (VТ1-00) titanium displays mechanical properties comparable to those of high Ti alloys

A metal matrix composite—aluminium alloy AA6061/NiTi

Page 73: Search - February 2013
Page 74: Search - February 2013

74 SEARCH - THE INDUSTRIAL SOURCEBOOK | F E B R U A R Y 2 0 1 3

Magic Materials

aterials science is an interdisciplinary field involving the properties of matter and its applications to various areas of science

and engineering. This scientific field investigates the relationship between the structure of materials at atomic or molecular scales and their macroscopic properties. Materials science also deals with fundamental properties and characteristics of materials. It is also an important part of forensic engineering and failure analysis. In materials science, rather than haphazardly looking for and discovering materials and exploiting their properties, the aim is to understand materials so that new materials with the desired properties can be created.

The basis of materials science involves relating the desired properties and relative performance of a material

in a certain application to the structure of the atoms. The major determinants of the structure of a material and thus of its properties are its constituent chemical elements and the way in which it has been processed into its final form. These characteristics, taken together and related through the laws of thermodynamics, govern a material’s microstructure, and thus, its properties.

sMart MaterialAs materials and technology have developed over the years, many new-fangled materials find their uses in the industries, especially civil engineering. They use it to deal with the deteriorating infrastructure. ‘Smart material’ is a promising example that deserves a wide focus, from research to application. With two crystal structures called Austenite and Martensite under different temperatures, smart

material exhibits two special properties different from ordinary steels. The first is shape memory, and the second is superelasticity. These two properties can suit varied applications in civil engineering, such as pre-stress bars, self-rehabilitation and two-way actuators. The most important objective presently for the industry vox populi is to investigate the application of smart materials in civil engineering by focusing on literature review, basic information collection and basic mechanic properties of smart materials. In axial tension tests, the force-extension curve and stress-strain curve of shape memory and superelasticity materials were measured separately.

Four beam experiments are conducted regularly by companies to evaluate the performance of flexure beams with superelasticity material as reinforcement bars. Load-displacement

M PRATEEK SUR

the use of new-age engineering materials is considered as a matter of importance in the current global industries, especially the manufacturing industry, to develop new-age products. companies prefer new survey methods, adopting ideas from various experts and combining them with strategies along with the descriptive-analytic and comparative-analytic tactics. Currently, the adoption of technology for new-age engineering materials might seem sufficient, but the real technological potentials are way beyond. companies should give due attention to such upcoming technologies, both in theoretical and practical areas, so that these new age materials do not get sidelined and are given due attention.

spending on innovation is the key

Page 75: Search - February 2013
Page 76: Search - February 2013

76 SEARCH - THE INDUSTRIAL SOURCEBOOK | F E B R U A R Y 2 0 1 3

Magic Materials

relationship at the mid-span, strains on the surface of the concrete beam and cracking width for different loads are also measured. Companies investigate the application of smart materials in structural engineering.

advances in abundanceThere are tremendous opportunities that enable companies to sustain the development of renewable energies in the 21st century. Specific advances in materials and manufacturing can deliver significant energy, environmental, and economic impacts to businesses in as soon as 2–10 years. The opportunities

that new-age engineering materials provide are powerful in all aspects. More than 100 experts from a cross-section of professional societies representing more than 75,000 scientists and engineers have participated in various aspects of a recent study, which examined the materials and manufacturing advances that will ensure clean energy in the future. The recent study identified 54 specific opportunities that could save more than 2,800 trillion British thermal units of energy every year. This amount is more than the total amount of US energy provided by wind, solar, biomass waste and geothermal. The study also emphasised on the new opportunities as these would also help avoid 435 million tonne of CO2 emissions, which

are equivalent to about one-third of all CO2 emissions generated by the US industrial sector, and eliminate US$65 billion in unproductive energy expenditures by American businesses every year. If this is successful, it could well be taken across to other nations. The opportunities identified are enormous. Companies are looking out for materials and manufacturing breakthroughs that can make manufacturing more energy efficient, productive and profitable. Other emerging technologies can also help to reinvent energy-efficient transportation, capture more benefit from existing

energy sources and capitalise on all available and emerging energy sources.

What’s the latest developMent?Differently shaped nanoparticles are being tested using computer simulation. This is done for determining how nanoparticles naturally form patterns and possibly create entirely new materials. Some of the shapes assembled into regular crystals—lattices in which each particle has a fixed position and orientation—and some formed plastic crystals or liquid crystals. In a plastic crystal, each particle has a fixed position within the lattice, but can rotate; a liquid crystal, on the other hand, contains particles with correlated orientations, but fungible positions.

What’s the big idea?Advertising any new idea is of primeval importance. When scientists explore new engineering materials, they are often not able to market it properly and therefore, a good invention gets unnoticed by the industries. Recently, a new material has been invented in 145 distinct polyhedral shapes, which are three-dimensional structures formed by a series of planar faces. Materials science and physics, say that companies should also invest in the designing of entirely new engineering materials.

Companies are always on the lookout for new engineering materials but they are not eager to spend money on it. The new materials could be used in nano-sized engineering projects to create super-strong, super-efficient materials at a microscopic level. Such kind of research is like to be the ‘Holy Grail’ of materials science. Researchers should be able to just look at a building block and be able to predict all kinds of crystal structures that would be stable with it.

Where does the future lie?While new-age engineering materials are created using natural elements, they are also developed in labs. Companies are ready for innovation, but they are not ready to shell out the cash required for any such R&D activity. Companies are mostly not wrong in their view. It is the attitude of the users that needs to change. Often, companies introduce something new, which is better but the users are not ready to buy it as they are content with the present one. This hampers the company’s intentions of spending on R&D as they end up spending on the existing product itself. Thus, the user also needs to look out for newer innovations and be ready to spend on the same. If such a system evolves, then companies will be able to come up with new and better engineering materials.

[email protected]

The Arapaima fish is one such fish, which swims in a swarm of piranhas. The reason it does not get affected is its intricately designed scales, which is providing ‘bioinspiration’ for engineers looking to develop flexible ceramics. In a lab experiment, piranhas were pitted against Arapaima by using a machine that resembles an industrial-strength whole punch. Piranha teeth were attached to the top ‘punch’, which was pressed down into Arapaima scales embedded in a soft rubber surface (which mimics the soft underlying muscle on the fish) on the lower ‘punch’. The teeth could partially penetrate the scale, but cracked before they could puncture the muscle.The scales of the Arapaima unite a heavily mineralised outer layer with an internal design that helps the scale resist the pirahna’s razor-like bite. The mix of materials is similar to the hard enamel of a tooth deposited over softer dentin. It’s a combination that engineers would like to reproduce for applications such as soldiers’ body armour, which needs to be both tough and flexible. Other applications might include fuel cells, insulation and aerospace designs.

neW engineering Materials in piranha-proof arMour

Page 77: Search - February 2013
Page 78: Search - February 2013

ProsPects & Possibilities

78 SEARCH - THE INDUSTRIAL SOURCEBOOK | F E B R U A R Y 2 0 1 3

hile the sector accounts for about 45% of the manufacturing output and 40% of the total exports of the country,

FY13 may test the real strength of this segment. It is well known that MSMEs provide good opportunities for both self-employment & wage employment and consistently register a higher growth; however, the current economic slowdown across major economies of the world has started impacting them on many fronts.

Declining exportsThe Euro crisis has impacted the major economies of Europe including those of Germany, France and Britain ,which has resulted in the slowdown of demand from Europe—a market that consumes 27% of the emerging economies’ exports. Further Euro has been getting devalued more than 20% against US$ since November 2009, which has reduced the profitability in

exports to the European market. In FY11, the European Union accounted for 18.6% of India’s exports and the US accounted for another 10.7%. The slowdown in these two markets has impacted gems and jewellery (G&J), textile and leather industries, which holds a significant share in MSME exports.

The Indian G&J industry is one of the most prominent industries in the country and remains primarily export driven. In FY12, exports for the G&J industry marginally declined by 0.4% y-o-y to US$42.84 bn (`2,048.2 bn) owing to the decrease in exports of diamonds. In Q1FY13, G&J exports declined by 7.3% y-o-y to US$10.15 bn (`55.27 bn). The textile industry, which is also export driven, has shown signs of slowing down with its composition in the total Indian exports declining from 23.81% in FY11 to 10.89% in FY12 in US$ terms, although the industry achieved a growth of 19.43% during the

aforesaid period to US$33,161.74 mn (`159,570.56 crore). During Q1FY13, apparel exports (part of the textile industry) to the US saw a sharp decline of 16.4% in the quantity exported and 14.6% in value terms to 223.1mn and to US$ 790.1 mn respectively. Similarly, the leather industry, which is export dependent, also showed signs of stagnating with its composition in total Indian exports remaining flat at about 1.6%, both in FY11 & FY12 in US$ terms. However, the industry had achieved a growth of 22.68% during the aforesaid period to US$4,868.71 mn (`23,332.38 crore). The US and European countries account for about 65% of the country’s leather export market.

The pharmaceutical industry, which exports to more than 200 countries, has been comparatively lesser impacted, with its composition in total exports increasing from about 2.6% in FY11 to 2.8% in 9MFY12 in rupee terms. The industry achieved export revenue

W

FY13: A challenging yearfor indian MsMes

six dimensions of the external environment constitute a great challenge in the short to medium term for the indian Micro, small and Medium enterprises (MsMes). the collective impact of slowdown in export markets, rupee, domestic inflation, higher borrowing costs, volatility in market prices and trickle down impact from large corporates are likely to deteriorate the profitability levels and liquidity profile of this segment, which plays a pivotal role in shaping the indian economy.

Page 79: Search - February 2013

F E B R U A R Y 2 0 1 3 | SEARCH - THE INDUSTRIAL SOURCEBOOK 79

ProsPects & Possibilities

of `294.91 bn for 9MFY12 as against `303.83 bn in FY11.

inFlAtion & AvAilAbilitY oF creDitThe low policy interest rates are being maintained by the European Central Bank because of the Euro crisis. Similarly, low rates in Japan and the US, combined with slow growth in Europe, have led to capital inflows in India and other emerging markets. However, on the other side supply constraints have severely impacted food prices causing inflation to remain at elevated levels. This resulted in inflationary pressures in India leading to increased input costs for Indian MSMEs, who, in order to maintain their competitiveness, found it difficult to raise the cost of their product in comparison to their larger counterparts. This led to erosion of their profitability. This also led to RBI maintaining a hawkish stance on interest rates and making it clear that it would not lower them until inflation is under control. The rise in key policy rates (Repo and Reverse Repo) by RBI in order to control the inflation has made loans costlier. This has affected the credit available to enterprises for running their operations. Rise in interest rates have also severely impacted Indian MSMEs, as the loans have become dearer to them by about 3.5% in the last 20 months. The Indian banks have also been risk averse in forwarding credit to Indian MSMEs as the banks have found the sector to be less credible. The average cost of purchase for the highly impacted industries as reflected through its WPI index over the past three years can be seen in the table below:

Industry FY10 FY11 FY12 G&J 236.02 296.07 414.78Textile 106.73 119.62 128.54Leather 128.35 127.08 130.03Pharmaceuticals 112.72 115.40 119.64

Further, RBI has projected the WPI inflation for FY13 to be at 7.0% as against the actual 6.9% for FY12.

rupee DepreciAtionThe slowdown in Europe has led to the depreciation of Euro against the US$. Global investors, rather than betting on the recovery of the Euro zone, found a safe haven in US$, which enabled US$ to appreciate as compared to other currencies of the world. Declining exports, coupled with rising crude prices, created upward pressure on Indian rupee, which, in turn, depreciated against US$. The depreciation of the Indian rupee has significantly impacted the Indian MSMEs as it resulted in the import of inputs becoming costlier, thus forcing the industries primarily operating in the MSME sector to reduce imports and downsize their operations in order to survive the current economic scenario. The G&J industry is heavily dependent on imports as the primary raw material is scarce in India. Imports of raw material for the G&J sector have declined by 13.1% to US$3.76 bn on y-o-y basis during June 2012. The textile industry has also been affected resulting in a decline in imports of silk yarn & fabrics in FY12 by about 34% to `517.66 crore. The composition of raw material imports for the leather industry in the total Indian imports have also declined from about 0.13% in FY11 to about 0.11% (`19.6 bn) in 9MFY12.

The pharmaceutical industry, on the other hand, has been relatively less impacted and its composition in the total Indian imports showed a marginal increase from about 0.32% in FY11 to about 0.33% (`57.0 bn) in 9MFY12.

volAtile MArketThe Euro crisis has added to the volatility of global financial markets, which, in turn, has also impacted the Indian financial markets. The high rates of inflation have led to increase in the interest rates by Reserve Bank of India (RBI). RBI has raised interest rates 13 times since last 20 months. Further, volatility in the international markets has led to risk aversion by

investors and they have responded by investing in relatively safer bullion market. This has increased the cost for these small enterprises, thus affecting their profitability.

trickle DoWn iMpAct oF lArge corporAtesThe overall slowdown in the domestic market as well as in most of the developed economies of the world has led to a slowdown in the operations of larger entities operating in India. This has impacted several Indian MSMEs who are dependent on these larger entities for their business activities and work as ancillary units to them. Moreover, the inflationary pressure has forced several Indian MSMEs to pass on the cost price rise on the end consumers, thereby increasing the cost of final products. This has also resulted in losing their competitiveness to their larger counterparts due to the high price of final products.

conclusionThe slowdown in the Indian economy has happened at a time when the major economies of the world are finding it difficult to maintain its growth momentum. While the Euro crisis has affected exports, the sharp increase in domestic interest rates to control inflation in the recent past has affected the interest-rate-sensitive sectors such as automobiles, infrastructure and textiles. MSMEs are the primary suppliers to the aforesaid industries in addition to other larger industries, who are all being affected due to the current worldwide slowdown resulting in shrinking demand and increased payment cycle. On the whole, the various aforementioned developments have resulted in deterioration in their financials, leading to a negative outlook in their credit ratings.

Avinava Adhikary, Manager, CARE RatingsEmail: [email protected] article has been repurposed from ‘CARE SME Digest’.

Page 80: Search - February 2013

OpiniOns & MOre

80 SEARCH - THE INDUSTRIAL SOURCEBOOK | F E B R U A R Y 2 0 1 3

Evolutionary trEnds witnEssEd in control systEms in thE last two dEcadEsTechnological advancements in process monitoring, control and industrial automation over the past decades have contributed greatly to improve the productivity of virtually all manufacturing industries throughout the world. While 90% of the global production is still controlled by analog instrumentation, almost all the controls installed as a part of a new plant or plant expansion are Digital Control Systems (DCSs) connected by digital networks. The heart of these advancements is specialised IT systems. To remotely provide end users with comprehensive real-time information and allow for higher levels of reliability and control, these systems have become more and more interconnected. The new generation of automation systems utilises open standards such as OPC, PROFINET, IEC 60870-5-104, DNP3.0, IEC 61850 and commercial technologies, in particular Ethernet and TCP/IP-based communication protocols. They also enable connectivity to external networks such as office intranet and the Internet. We, at Red Lion, have also evolved with the advancements and kept pace to design products,

which can connect to open standards protocols.

plEasE Explain your taglinE ‘connEct, monitor, control’ in thE light of your product offErings…

Red Lion has evolved over the years. As a result of our N-Tron and Sixnet acquisitions, our product offerings have expanded from panel metres, controllers and HMIs to include industrial Ethernet switches, Wi-Fi radios and cellular M2M routers. Our

growing product portfolio speaks to us as the global experts in communication, monitoring and control for industrial automation and networking.

currEnt tEchnology advancEs doing thE rounds

automation is the answer to india’s quest for being a world-class industrial competitor

“the growing trend is to link computer networks and software to control points, and then to the industrial devices that need to be controlled,” informs naveen Kumar mote, general manager – india, red lion controls, during an

interaction with team sEarch. Excerpts…

Page 81: Search - February 2013

F E B R U A R Y 2 0 1 3 | SEARCH - THE INDUSTRIAL SOURCEBOOK 81

OpiniOns & MOre

As the decades went by, the scale of activity increased dramatically and it was clear to the quality pundits that automated mechanised capital is a far better choice in terms of quality, productivity, efficiency and standardisation. Apart from the speed, what accrues from automated manufacturing are simplification of production, improved workflow, higher consistency, quality and reduced handling. Even the workers feel motivated when a satisfactory implementation of automation is made. The growing trend is to link computer networks and software to control points, and then to the industrial devices that need to be controlled. The combination of computers and networks together with wireless solutions has proven to be the way forward for industrial automation.

indian marKEt vis-à-vis othEr countriEsIndia, as one of the world’s fastest growing economies, has to take technologies at a rather quick pace. India has now realised the importance of developing its own strength with automation instead of being the smaller ally of the world. Automation is the answer to India’s pursuit for being a world-class industrial competitor. The Indian automation market has acquired the critical momentum to propel the instrumentation, control and automation industry to a higher growth trajectory. India has the right mix of process industry that provides excellent growth opportunities for the entire spectrum of automation products and systems. With a Gross Domestic Product (GDP) growth of around 7%, India has one of the fastest growing economies in the world, and India is moving steadily on the path of global integration.

your stratEgy to bE thE suppliEr of choicE Red Lion’s success is proof that we offer outstanding service. In

this dynamic market of industrial automation and networking technology, we have seen many companies come and go in the last 40 years. If we hadn’t earned ourselves a reputation as a reliable partner, we wouldn’t be the successful company that we are today. In a manufacturing environment, the cost of failure is simply too high. You may be happy with your home network if it works 99% of the time, but on a production line that 1% failure rate would be an expensive nightmare. That is why we make significant investments in a holistic quality concept, from development and testing through manufacturing and quality control to stock keeping and post-sales support.

to bE compEtEnt, thE company’s products nEEd to bE cost compatiblE, EfficiEnt and Eco-friEndly. pls justify…You need to look beyond the price tag at the total cost of ownership. Having research, development and production in the USA gives us total control over the entire manufacturing cycle. A short supply chain also means that we can react quickly to customers’ requirements and deliver products faster. Our factory turn-around is only three days and 80% of all orders are shipped the same day.

Red Lion’s Data Station Plus is the single-device solution for protocol conversion. The DSP bridges the communication gap between disparate serial, Ethernet and fieldbus devices—unlocking untold information from PLCs, drives, motion controllers and other communications-capable devices orphaned by incompatible communications standards. These features include a built-in HMI that enables more flexibility and a web server that provides access to the filed data from remote locations. This enables end customers to proactively take necessary action for better efficiency.

Another clear advantage of using this product is getting legacy machines onto a common communications backbone

used to be largely impossible, sometimes requiring a complete replacement of automation components. The Data Station Plus allows you to convert your old PLCs’ and drives’ proprietary protocol into a modern and open standard. By unlocking information hidden in these legacy devices, you save money while avoiding a risky upgrade to equipment that is otherwise working perfectly.

fulfilling customErs’ uniquE rEquirEmEntsOur President, Mike Granby stresses that unique solutions for any vertical or any market should provide products/solutions, which have the ability to connect, monitor and control different devices. This helps companies to maximise their productivity. We provide high-quality solutions for applications such as process, transportation or energy where failure is not an option. In today’s scenario of automation, UPTIME is the key.Getting the right data to the decision makers at the right time is essential; this enables them to take instant action to avoid any failures and also improve their productivity. We, at Red Lion, manufacture products that give our customers reliable connectivity to their remote sites. This provides them complete control over their systems with connectivity to numerous protocols. This is one of the unique features of Red Lion products.

your futurE plans for Expansion…From the Indian perspective, our focus will be to continue strengthening Red Lion’s position as an industrial automation and networking solution provider. We also plan to improve our channel network to better cover the Indian market while focusing on increasing our OEM market, finding new customers and discovering new applications. We believe that the Indian market will improve, and we are confident that we will continually strive to always do better!

Page 82: Search - February 2013
Page 83: Search - February 2013

SEA

RC

H F

ebua

ry 2

013

Ad

Nam

e: M

ahin

dra

Pg

No.

83

Page 84: Search - February 2013

SEA

RC

H Febuary 2013 A

d Nam

e: ImI Im

px Pg No. 84

Page 85: Search - February 2013
Page 86: Search - February 2013

Green ManufacturinG: addressinG enerGy issues

86 SEARCH - THE INDUSTRIAL SOURCEBOOK | F E B R U A R Y 2 0 1 3

MANAGING ENERGY IN INDUSTRY Energy intensive industries such as metals manufacturing, glass and plastics processing and food & beverage production understand the need for energy management because their processes involve great amounts of heat. These businesses have traditionally sought ways to maximise their return on investment from the energy used in their primary processes. However, even such businesses often fail to realise how much more can be saved through building controls and a companywide energy policy. All industries can benefit from such a policy, but it must extend beyond the production environment into every aspect of the sites. Offices, for example, stand to save just as much as in the commercial sector.

While in many countries, industrial energy use has now been slightly outweighed by the energy consumed by commercial and residential buildings, it is a fact that industry consumes huge amounts of electrical power, two-third of which is typically consumed by power electric motors. Of these, an overwhelming majority can be made more energy efficient by controlling their switching on and off or by controlling their speed. This is a relatively simple task of equipment retrofitting, yet it is clear that most manufacturing and process plants fail to take this

step. This is often because people who control the costs of an industrial operation do not communicate with those in charge of the management of the production processes.

For example, if a painting plant uses hundreds of AC motors in fans, pumps and compressors (continuous duty applications), it could readily benefit from the use of variable speed drives. However, while the plant manager, as an engineer, understands this, he or she is invariably responsible for improving productivity or output and not for the overhead costs. Although higher management is concerned with paying the overheads, it remains unaware that such a saving is possible. This is because it is never on the agenda in engineering meetings. In industries,

As domestic appliances, computers and entertainment systems proliferate, and other equipment such as air conditioning and ventilation systems increase in use, electricity consumption is rising at a higher rate than

other forms of energy usage. Moreover, up to 50% of the CO2 emissions attributable to residential and commercial

buildings is from electricity consumption. This calls for the deployment of new energy saving or energy efficient technology, which helps achieve lower energy costs as well as enables the industry, business and residential

properties to be socially and environmentally responsible.

Unlocking Energy Efficiency

Page 87: Search - February 2013

F E B R U A R Y 2 0 1 3 | SEARCH - THE INDUSTRIAL SOURCEBOOK 87

Green ManufacturinG: addressinG enerGy issues

senior management and plant engineers must communicate if comprehensive energy efficiency is to be achieved. In no other sector is the communication gap wider than between

those charged with making energy decisions in industry and those who actually know how energy can be saved.

MANAGING ENERGY IN RESIDENTIAL PROPERTIES The residential sector is classified into three distinct areas with respect to electrical energy efficiency: • Privatehomeowners/tenants• Builders/architects/developers• Public and residential social

housing Private occupiers of

houses and apartments

represent the market ‘pull through’ on electrical energy efficiency. This group makes its own decisions on buying energy efficient lamps & tubes and installing lighting controls. Home buyers and tenants will become an increasingly influential group if people begin to demand energy efficient homes or houses with better controls. Until such time, the quest is to ensure that the public is informed as to where technology can play a part in saving energy.

Builders, architects and surveyors have a directinfluence on the electrical energy efficiency of the dwellings they build. However, as in the commercial sector, most attention is given to thermal measures such as insulation and glazing. In most regions, builders will only invest in features within their properties, which will enable them to sell or be rented quickly. Hence, the greatest investment in enhanced living tends to be the installation of luxury kitchens and bathrooms rather than practical energy efficiency systems. This group needs to understand that if presented to the public attractively, the benefits of, for example, zone or occupancy lighting controls can be great.

Those responsible for the building and refurbishment of social residential housing should be aware of electrical energy efficiency. However, again, there appears to be a widespread lack of knowledge of the controls available and the relatively low cost of installing them. In all residential sectors, builders, landlords and tenants need to understand all the ramifications of electrical energy efficiency priority if the targets for emission reduction from the sector are to be realised.

Courtesy: Schneider Electric

Page 88: Search - February 2013

Green ManufacturinG: addressinG enerGy issues

88 SEARCH - THE INDUSTRIAL SOURCEBOOK | F E B R U A R Y 2 0 1 3

l ow

er

emissions

con

sserv

es

eenn

e rg

y

w a s t a ggel e vee l s

determine 80% of the manufacturing cost?—was written by MIT researchers Karl Ulrich and Scott Pearson. With some case studies and analyses, this report attempts to determine the extent to which product design influences the manufacturing cost of a product. The researchers studied this for a class of high-volume, electromechanical consumer products such as automatic drip coffee makers and found that for coffee makers, the variation in manufacturing costs attributable to differences in product design is slightly smaller in magnitude than the variation in costs attributable to differences in manufacturing systems, for a specific range of assumed manufacturing system parameters. They note that the ‘rule of thumb’ is especially flawed where the dominant cost contributor is the cost of materials. Further, they also noted that there is a basic logical flaw in the argument that if the minimum possible manufacturing cost is 80% of the maximum possible manufacturing cost, then product design is a critical activity of the firm. The flaw arises from the assumption that much of the 80% of the cost is under the control of the product designers.

However, for now, we are concerned with the influence of design vs manufacturing on the lifetime product energy or resource impact. So, going back to use vs manufacturing impacts, you might recall that we can actually visualise this use vs manufacturing impact space in terms of what needs to be done depending on where the product sits in that space. In Figure 1, we can see four quadrants of ‘sustainable product’ characterisation.

The axes are the same as in the use vs manufacturing

There have been discussions on the connection between the use phase impact and the manufacturing phase impact

of a product and what influences these, in the context of both looking at means to reduce consumption. This implies

giving the consumer products that deliver the required functionality or service, but at a lower environmental

impact or energy/resource consumption.

Where does the (green) buck stop?

There are a number of stages along the product development chain where critical decisions are made and which may have a positive or negative influence on this impact. We have already delved upon whether or not the rule of thumb that 20% of the design influences 80% of the cost of a product also applies to the energy/resource impact. I think that, in many cases, it does not work that way.

In 1993, a related study—Does product design really

Page 89: Search - February 2013

F E B R U A R Y 2 0 1 3 | SEARCH - THE INDUSTRIAL SOURCEBOOK 89

Green ManufacturinG: use vs ManufacturinG

discussion and indicate, from low to high, the consumption or impact of that phase of the product’s life cycle. Next, the ‘low-low’ quadrant indicates the most sustainable product, while the ‘high-high’ quadrant contains products that are to be avoided or, in another sense, offer the most potential for improvement. The two ‘high-low’ quadrants represent products where we need to either increase the efficiency of the product (with respect to design or using manufacturing leveraging) or improve the efficiency of the manufacturing process relative to use and manufacturing phases.

This figure does not, however, discuss the relative importance of all the phases of the product life with respect to the role of design. I’ve tried to capture this in Figure 2. The figure shows the contribution to lifetime impact or the energy/resource use of the various phases of a product, from the first concept through design and production to the end of its life.

First, please note that this is a conceptual drawing trying to represent reality. There are a lot of examples where this might not represent real product performance. In addition, you might be able to adjust the location of the high and low parts of a particular pattern relative to the phase as well. However, having said that, we can identify at least four patterns of impact shown in the figure as A, B, C and D.

I think that Pattern A, in blue, is a typical impact cycle with the major contributions to impact coming in the manufacturing and use phases. Pattern B, in red, reflects the design decisions that affect product impact more aggressively—such as inefficient use of energy based on design decisions/component selection, materials choice, etc. Pattern C, in yellow, reflects an introduced manufacturing process/system efficiency that reduces the manufacturing contribution, but has little impact on the rest of the product performance. This might be due to a more efficient process chain for manufacturing.

Finally, pattern D, in green, represents an example of ‘leveraging’ manufacturing. Here, the assumption is that a more capable manufacturing process is introduced in the production plan, which may consume more energy or resource in itself but offers product advantages in that it improves the performance of the product over its lifetime. The example about improvements in automobile engine efficiency due to the aggressive use of precision manufacturing falls in this category.

An important point to note is that the area under the curve is the cumulative impact of the product—basically, the product of impact x time. This implies that Pattern

D is the best in this example since the area under the line representing that pattern is the smallest of all the examples. The worst case illustrated here, in terms of cumulative impact, is pattern B—poor design decisions. It is possible to have an improved manufacturing offset, but a somewhat poor design. Pattern C does that to some extent.

With respect to these two figures and the decisions that can be made along the product phase from design through the end of its life, which will have an effect on where the product is located in the use vs manufacturing space, there is a lot of potential for reducing the impact of the product. Also, you can tell from the way I have composed the examples saying that I come from the manufacturing side of the engineering profession! I just want to make sure that we all are aware of the tremendous potential manufacturing offers to address the sustainable consumption challenge.

Courtesy: David Dornfeld, Will C, Hall Family Professor of Engineering, Director, Laboratory for Manufacturing and Sustainability, University of California

Increase Product Efficiency

(Design or Manufacturing Leveraging)

High

High

Low

Low

Use Phase Consumption

Or Impact

Manufacturing Phase Consumption Or

Impact

Most Sustainable

Increase Process Efficiency(Improve

Manaufacturing)

Least Sustainable

(Avoid)

A

B

CD

Con

tribu

tion

To L

ifetim

e Im

pact

Of E

nerg

y/R

esou

rce

Use

Concept Design/Testing Process Planning Production Use End of Life

Product Phase

Figure 1

Figure 2

Page 90: Search - February 2013

group collaboration

90 SEARCH - THE INDUSTRIAL SOURCEBOOK | F E B R U A R Y 2 0 1 3

magine a scenario wherein you can easily procure the best price for the raw material required to manufacture

automotive OEM parts, for construction needs or for precision engineering. Examples include chemicals & additives, inks, paints, polymers, cement and so on. Whatever be your requirement, buying clubs that bring buyers and suppliers on the same platform can help manufacturers find solutions to several problems at the same time. This includes the acute problem of economical and quality supply of raw material for the manufacturing sector, putting in place a consistent and sustainable supply chain and eliminating the constant worry of ensuring constant and timely supply of raw material.

GROWTH MATTERSAccording to a research report by Zinnov Management Consulting,

a frequently asked question is how buying clubs will help the overall SME sector to grow. First, let’s take a quick look at where the SME sector currently stands. Today, there are an estimated 35 million SMEs in India. Together, they employ 42 million people and contribute to a stunning 45% of the industrial input and 40% of India’s total manufactured exports, informs a report by SME Chamber of India. These figures make for a sector that contributes up to 8% of India’s GDP (Source: SME India.net). However, this sector is far from realising its real potential, as compared to other countries. China, in comparison, provides employment to 94 million people with a network of 37 million units.

Further, India is aspiring to achieve an economic growth of 9% or more over the next decade. To achieve this level of overall GDP growth, assuming a steady growth of 2.5% and 8% in the agriculture and manufacturing

sectors, respectively, the SME sector (both existing and new enterprises) would need to quadruple its GDP contribution from the current level of US$200 billion. This would mean that both existing and newly created enterprises would contribute as much as 28% of India’s GDP by the year 2020, when the overall economy is expected to reach US$2.8 trillion. With the current downward revision of the projected GDP growth rates in the range of 5.7% to 5.9% in 2012–2013, from the earlier estimate of 7.6%, its becomes extremely essential to find solutions that would reduce the problems faced by the SME sector in India. To help turn the vision of economic growth rates into reality, SMEs must be in a position to unlock their manufacturing potential and grow consistently.

BUYING CLUBSComing back to how buying clubs can help in this scenario, let’s first look at

IWith approximately 35 million SMEs in India, it is highly essential to ensure timely delivery, quality conformance

and a steady supply of raw material. Here’s taking a look at the role played by buying clubs and how group procurement of manufacturing supplies can provide an added impetus to the growth of the SME sector in India.

Page 91: Search - February 2013
Page 92: Search - February 2013

group collaboration

92 SEARCH - THE INDUSTRIAL SOURCEBOOK | F E B R U A R Y 2 0 1 3

how buying clubs can work to improve the manufacturing process supply chain. The SME sector is highly fragmented as an industry and this is a major problem at the supply end of the chain. Although there are several organisations and forums that cater to the needs of SMEs, they are scattered. In this environment, SMEs have been left to fend for themselves, which is a great stumbling block in their growth and development. An online buying club, using collaborative software, can work to solve all the procurement needs of SMEs; this is a bold initiative that has been introduced at the right time. This concept can turn all the challenges faced by the SME sector into opportunities. How does this work? Buying clubs bring buyers and sellers at one platform and take on the job of negotiating bulk prices and doorstep delivery. This allows SMEs to focus on their core business of driving growth and expansion, rather than dealing with daily operational issues of supply and delivery of raw material.

The SME sector needs a one-stop platform for their procurement needs that can be quickly scaled up and spread across not only various manufacturing verticals but also the country. In this situation, the customer is truly the king as online platforms help SME buyers to come together in order to negotiate the best prices and services. Online buying clubs act as sourcing & purchase aggregators and turn the constraints faced by SMEs into opportunities. These buying clubs are not the regular e-commerce sites; they are much more than that. With low inventory business models, SMEs will only incur the cost of in-transit inventory risk. End-to-end logistics are essential to ensure that doorstep delivery of raw material is outsourced to a third party, further reducing risk and costs.

ONLINE TRACKINGBuyers can also track their order

online through a service portal, which is available to them all days throughout the year. Special procurement software also allows for push notification reminders about procurement that provide critical business information about the last purchase, most frequent purchase and so on. Moreover, as everything is available online, buyers can quickly compare the best available prices and view their billing and reconciliation in a transparent manner. As this platform is online, buyers and sellers can take advantage of the Internet to further expand the network through focused search solutions and use of online platforms to discuss the procurement challenges faced by the SME sector. With over 120 million Internet users, this model can also spread to Tier 2 and Tier 3 cities, helping businesses to deploy national networks that are not constrained by the local availability of manufacturing raw materials.

MONEY MATTERSThis model will also help solve one of the biggest problems faced by the SME sector—rising costs of raw material. Input costs have been steadily rising in the SME sector and this affects its ability to compete effectively not only in the domestic market but also internationally. Buying clubs help reduce the rising costs of raw material by connecting the buyer directly to the seller and offering them lower, negotiated prices. This results in lower margins, better profits and cash flow for SMEs. The SME sector is also a highly undercapitalised sector in the country. Experts assess that large Indian firms raised 47% of their total funding from internal sources, 19% from banks and financial institutions and 5% from capital markets. The remaining 29% came from alternative sources. For SMEs, the financing pattern was radically different. Half of their total annual

funding came from alternative sources, including family and friends and credit. Only 15% came from internal sources, 25% from banks & financial institutions and 10% from capital markets. In addition, the smaller the firm, the more is its dependence on alternate sources of finance.

MEASURES UNDERTAKENThe government is implementing a slew of measures to ease the pressure on cash, including directed credit programmes where the government requires banks to provide loans on preferential terms and conditions to SMEs for the development of the sector. As a policy, banks, especially public sector undertakings, have numerous SME development schemes, which financially help these institutions, but these measures will take long to bridge the credit gap. The industry can help itself to solve some of its problems by making use of the technologies that allow buyers and sellers to assemble online and help them achieve a national manufacturing demand and supply network at the fraction of a cost of a brick and mortar buying club.

All over the world, the SME sector is the cradle of entrepreneurial spirit and fortitude and has the potential to lift people out of poverty by creating jobs nationally. The SME sector is the backbone of India’s manufacturing sector and is handling the twin pressures of high and inconsistent procurement costs & processes and undercapitalisation. It is time for the sector to network and take advantage of the advancement in technology to solve these challenges. Only then will the sector be truly free to bring about an economic miracle for India.

R Narayan, Founder & Chief Executive Officer, Power2smeEmail: [email protected]

Page 93: Search - February 2013
Page 94: Search - February 2013

industrial robot selection guide

94 SEARCH - THE INDUSTRIAL SOURCEBOOK | F E B R U A R Y 2 0 1 3

Reduce OpeRating cOstsRobots can help you reduce wage related costs as well as indirect overhead costs. Take energy, for example. With robots, you do not require minimum lighting and heating levels, which

can reduce your energy bills significantly.

impROve pROduct quality and cOnsistency Robots, with their inherent accuracy and repeatability, ensure high-quality finish for every product manufactured.

impROve wORk life Of emplOyeesWith robots, workers do not have to work in dusty, hot or hazardous conditions. Besides, once they learn how to use robots, they can

learn valuable programming skills and do work that is more stimulating.

incRease pROductiOn Output Rates A robotic solution can help you increase production levels and meet customer deadlines as it does not need time away for breaks, sickness, distraction or lack of

concentration.

incRease manufactuRing flexibilityRobots can provide flexibility to your production line. Once the processes you require are programmed into the robot controller, you can easily switch from one programme to

another and use the robots for a variety of products.

Reduce mateRial waste and incRease yieldBy using robots, you will have more products finished first time to the desired standards and reduce the amount of breakage and waste.

impROve wORkplace safety The robots can take over dull, dirty, dangerous and delicate tasks currently undertaken by manual workers. By using robots, you can decrease the rate of accidents and reduce

the occurrence of ailments associated with repetitive or intensive processess.

addRess the challenge Of RecRuiting skilled wORkeRsToday’s industrial processess require highly skilled manual workers who are becoming harder to find and expensive to employ.

Robots can be an ideal alternative without the costs associated with recruitment and training.

Reduce capital cOsts, impROve efficiencyFaster and efficient production lines with the help of robots help reduce capital costs associated with inventory and work in progress. By moving products faster in production, you

can ensure faster and efficient service delivery.

save pReciOus spaceRobots can help you save highly valued space in manufacturing areas as they can be placed on shelf systems, walls or even on

ceilings. They can also be programmed to work in confined spaces so you do not lose valuable floor space.

Courtesy: ABB

RObOtsto invest ingood reasons10

manufacturers using robots have typically seen significant transformation in their productivity and efficiency, with higher levels of output, product quality and flexibility among the many improvements reported. Here are 10 reasons why it is essential to invest in robots…

Page 95: Search - February 2013

F E B R U A R Y 2 0 1 3 | SEARCH - THE INDUSTRIAL SOURCEBOOK 95

Latest Popular Tenders brought to you by www.tendersinfo.com

Org: Organisation’s Name, TRN: Tendersinfo Ref No, Desc: Description, DSLD: Doc Sale Last Date, BOD: Bid Opening Date, Loc: Location, BT: Bidding Type.

InformatIon courtesy: tendersInfo.com1, Arch Gold, Next to MTNL Exchange, Poisar, SV Road, Kandivali (W), Mumbai - 400067, Maharashtra, IndiaTel: +91-22-28666134 • Fax: +91-22-28013817 • Email: [email protected]

Loc : Chennai, Tamil NaduBT : Domestic (NCB)

oIL fLoW meterOrg : Indian Ordanance FactoriesTRN : 14135233Desc : Supply of Oil Flow MeterBOD : January 31, 2013Loc : Kanpur, Uttar PradeshBT : Domestic (NCB)

cnc LatheOrg : Ordnance Factory BoardTRN : 14106479Desc : Supply of CNC Lathe (400 x 2,000 mm) BOD : February 8, 2013Loc : Jabalpur, Madhya PradeshBT : Domestic (NCB)

ProjectOrg : Finehope Allied Engineering Pvt LtdProject Type : New FacilityProject News : Finehope Allied Engineering Pvt Ltd is planning to set up a Solar Power Plant at Jaisalmer in Rajasthan. The project involves Generation of Electricity from Solar Energy.Loc : AhmedabadProject Cost : NAImplementation Stage : NAContact : Finehope Allied Engineering Pvt Ltd 305, 3rd Floor, Shapath-03 Near GNFC Tower, SG Highway Ahmedabad - 350054, India.Tel : +91 (11) 40506600Fax : +91 (11) 40506666Email : [email protected]

eLectrIc transformerOrg : Bangladesh Power Development Board (BPBD-S)TRN : 13532892Desc : Procurement of Electric TransformerBOD : January 27, 2013Loc : Dhaka, BangladeshBT : Global (ICB)

ruBBer endLess V BeLtOrg : Security Paper Mill (SPM)TRN : 13592923Desc : Supply of Rubber Endless V Belt BOD : January 28, 2013Loc : Hoshangabad, Madhya PradeshBT : Domestic (NCB)

PoWer transformerOrg : Ordance Factory BoardTRN : 14135621Desc : Provision of Power Transformer (Dry Type) BOD : January 29, 2013Loc : Jabalpur, Madhya PradeshBT : Domestic (NCB)

shot BLastInG machIne (jet tyPe)Org : Ordance Factory BoardTRN : 14119475Desc : Design, Manufacturing, Supply, Erection & Commissioning of Shot Blasting Machine (Jet Type)BOD : January 30, 2013Loc : Jabalpur, Madhya PradeshBT : Domestic (NCB)

cnc VertIcaL machInInG centreOrg : Ordance Factory BoardTRN : 14088885Desc : Supply of CNC Vertical Machining Centre BOD : January 31, 2013

Page 96: Search - February 2013

96 SEARCH - THE INDUSTRIAL SOURCEBOOK | f E B R U A R y 2 0 1 3

General Products

� Dry ice blasting machine

The Ascojet 908 is a complete dry ice blasting machine, based on the single-hose system. The dry ice blasting unit is very compact and mobile, mounted on 4 wheels,

equipped with 5 m hose and an OHS4 gun. Working pressure and dry ice used on the device are adjustable. This dry ice blasting

� cO2 generatOr

The CO2 high power generator are compact, easy to use and maintain. It is operated with

diesel, kerosene or natural gas and is fully automatic. This system operates efficiently and produce liquid CO2 of the highest quality. It generates CO2 production of up to 2,000 kg/hr. The

CO2 generator consists of a fabricated high-performance boiler, a stainless steel scrubbing tower, a stainless steel evaporator tower, stainless steel permanganate cleaner lines, various heat exchangers, pumps, central drive controller and a PLC with touch screen. The systems are constructed from carefully selected materials to achieve a good balance between system life and cost of capital. Before a system leaves the factory, it is after the agreed layout is completely assembled, tested at maximum capacity and provided with a surface coating.

Asco Carbon Dioxide LtdHorn, SwitzerlandTel: +41 71 466 80 80Fax: +41 71 466 80 66Email: [email protected]: www.ascoco2.com

� catering cOnveyOr

This converyorised system can be used to serve buffet

lunch for a gathering of 1000 people in 30 min with the least manpower. It is ideal for serving lunch in large public functions and in industrial canteens. The arrangement consists of S.S tables with moving nylon ropes, acting as conveying media, carrying the plates while serving the dishes. Length of 24 ft conveyor can accommodate 15 dishes kept inline with servers stationed behind serving 15 dishes in sequence, resulting in fully served plates coming out at the rate of 30 per min. It requires 230 V single phase supply, uses power as less as 60 watts bulb, with an additional feature of variable speed.

Prodaid Engineers Pvt LtdBengaluru, KarnatakaTel: 080 – 65345363Email: [email protected], [email protected] Website: www.prodaid.com

This section gives information about products, equipment and services available in the market. If you know what you want. . . refer to Product Index on Page 136 to find it quickly

� Water purifier

The Aquaguard cooler and purifier first cools the water and then purifies, eliminating the risk of

re-contamination of water and making it safe from disease causing bacteria and viruses. This product is specially designed to use for schools, offices, restaurants, etc. It is an extremely sleek and stylish cooler cum purifier which gives an elegant look to the machine. It retains the natural salts and minerals in water and purifies it without adding any chemicals, ensuring complete safe drinking water. It uses ultraviolet technology to remove physical, organic and microbiological impurities removing excess chlorine. It has steel, ABS body parts and leak-free design made of corrosion resistant material to ensure zero contamination from any other source and

the product has been designed using push to fit connectors to completely eliminate all chances of leakage.

Eureka Forbes LimitedMumbai, MaharashtraTel: 02230872578, Mob: 09819928028Email: [email protected], [email protected]: www.eurekaforbes.com

Page 97: Search - February 2013

f e b r u a r y 2 0 1 3 | SearCH - THe INDuSTrIaL SOurCebOOK 97

General Products

machine is easy to use and is ideal for industrial users who prefer simple cleaning procedure and where ease of handling is paramount. The Ascojet 908 with its handy hose system is particularly characterized by its lightness weighing only 47 kg, its practical design and its low air consumption.

Asco Carbon Dioxide Ltd Horn, SwitzerlandTel: +41 71 466 80 80Fax: +41 71 466 80 66Email: [email protected]: www.ascojet.com

� vOiD-fill packing system

The AirPouch void-fill air pillow system offers high quality alternatives to traditional peanut,

foam and paper packing materials. This compact unit is available in a variety of semi- to fully-automatic system configurations and produce durable, puncture-resistant air pillow packing materials in a range of sizes and mil gauges. AirPouch puncture-resistant air cushions are pre-formed with EZ-Tear perforations for easy handling and faster packing

Page 98: Search - February 2013

98 SEARCH - THE INDUSTRIAL SOURCEBOOK | f E B R U A R y 2 0 1 3

General Products

� reels fOr cOnfineD sanitary spaces

The SSN800 series stainless steel hose reel features a narrow frame that makes it ideal for mounting in smaller spaces.

With no paint to chip or potential for rust and corrosion, this reel is ideal for the food and beverage, dairy, pharmaceutical and cosmetics industries.Typical applications include washdown,

chemical transfer, potable water, food ingredient transfer and even fire protection. It is constructed with fine grade 304 stainless frames, discs and drum. It handles single ID hose from 3/4 to 1 inch, accommodates pressures up to 1000 psi and sustains temperatures from 20oF to 400oF (-7oC to 204oC).

Hannay ReelsU.S.ATel: 5187973791Email: [email protected]: www.hannay.com

productivity. These void-fill air pillows are environmentally friendly and provide excellent protection, increased product visibility and reduced shipping costs. It improves packing productivity and lowers shipping costs. Compact, benchtop system produces air pillow bags at speeds over 50 ft/min.

Kris Automated Packaging SystemsMumbai, MaharashtraTel: 022 – 67742222Email: [email protected]: www.krisautomated.com

� inDustrial iD reaDer

DataMan® 100 series of image-based ID reader combines industry-leading code reading software performance (up to 45

reads per second), ease-of-use, lighting, camera, processor and communications into an exceptionally small, industrial-rated housing. This

image based ID reader is an accurate identification device. The DataMan 100 verifier has been redesigned for faster setup and easier operation with a new lighting assembly, adjustable 30 and 45 degree angle lighting, an optional height-adjustable stand and a new part positioning guide for easier location of codes. It has a three-position adjustable lens, integrated lighting and LED aimer, train and trigger button for ease of setup and C-mount lens option.

Cognex Sensors India Pvt LtdPune, MaharashtraTel: 020 - 40147840, 09881466003Email: [email protected]: www.cognex.com

Page 99: Search - February 2013

f e b r u a r y 2 0 1 3 | SearCH - THe INDuSTrIaL SOurCebOOK 99

General Products

� flange mOunteD OnlOaD tapchangers fOr transfOrmers

The flange mounted onload tapchangers are used for regulating output voltage

of lower capacity power, distribution, furnance and rectifier transformers. They are approved and used by all transformer manufacturers, domestic utilities, major private and public sector companies including railways, national thermal power corporation, power grid corporation of India Ltd and all state Electricity boards. Range includes 11kv, 22kv, 33kv, 66kv and 132 neutral end oil filled tapchangers, 11kV dry type 100 amps tapchanger and 11kV,400amps dry types vacuum tapchanger. They have a maximum rated through current up to 500 amps and steps voltage up to 1200 volts and are suitable for bidirectional power flow.

CTR Manufacturing Industries LtdPune, MaharashtraTel: 020-26633402/3/4/5,Fax: 020-26633425Email: [email protected]: www.ctr.in

Page 100: Search - February 2013

100 SEARCH - THE INDUSTRIAL SOURCEBOOK | f E B R U A R y 2 0 1 3

General Products

� plastic film capacitOr

The present range of plastic film

capacitors covers metallised polyester, metallised polycarbonate, metallised polypropylene, film and foil polystyrene and polypropylene in round, box and flat

configuration, for automation, medical electronics, automobile electronics, power electronics, defence, railway, lighting and telecom applications. The capacitors are tested in the test laboratory and is approved by National Accreditation Board for Testing and Calibration Laboratories ( NABL ) traceable to ILAC and APLAC.

CTR Manufacturing Industries LtdPune, MaharashtraTel: 020-26633402/3/4/5,Fax: 020-26633425Email: [email protected]: www.ctr.in

Page 101: Search - February 2013

Sear

ch F

ebua

ry 2

013

Ad

Nam

e: E

vere

st

Pg

No.

101

Page 102: Search - February 2013

Search Febuary 2013 Ad N

ame: A

msak Pg N

o. 102

Page 103: Search - February 2013

f e b r u a r y 2 0 1 3 | SearCH - THe INDuSTrIaL SOurCebOOK 103

General Products

� sanD anD shOt blasting machine

The sand and shot blasting machine is specially designed by experts keeping in mind varied needs and

requirement of the clients. Made from wear resistant spares that offer anti-abrasive and anti-corrosive features, the shot blasting machine has carved niche in markets across the globe. The machine has robust construction, unique design and long operational life. It finds applications in cleaning of pipes and vessels, cleaning of sculptures and monuments, cleaning of bridges, tanks, removal of rust, corrosion and scales, re-conditioning and surface preparation before painting cleaning of structural steel.

Global EngineersIndore, Madhya PradeshTel: 0731-2702531, 09303235870Email: [email protected]: www.globalengineersindore.com

� universal Dimmer

The universal dimmer is used for control of lights in large commercial spaces. It is equipped with features like automatic recognition of load type and is one of the most

versatile product available. The main features of EV004 universal dimmer includes setting of mini/maxi levels, call of preset level,

D E C E M B E R 2 0 1 0 | SEARCH - THE INDUSTRIAL SOURCEBOOK 217

GENERAL PRODUCTS

BRAKES/CLUTCHES & COMBINATIONS

Emco Dynatorq manufactures and offers brakes, clutches and combinations for a wide range of application in rotating

equipment, viz, conveyors, mixers and blenders and for electric/geared motors, packaging machines, centrifuges, etc. AC/DC flameproof failsafe and non-flameproof electromagnetic brakes, clutches and combination and brake motors are also available. Brakes of torque up to 1200 Nm, flameproof failsafe brakes of torque up to 400 Nm and weatherproof brakes conforming to IP66 standard of torque up to 600 Nm are also manufactured. Flameproof failsafe brakes are designed for high toxic and hazardous environment in industries where non-flameproof equipments are not recommended for safety reasons. They are approved and certified by Central Mining Research Institute (CMRI) for gas group-I and gas group-IIA and IIB for zone 1 and 2 areas. Marine duty IP66 protection brakes are approved and certified by Electrical Research & Development Association (ERDA).

Emco Dynatorq Pvt Ltd, Thane (W) 400 602.Tel: 022-2540 5488, Fax: 022-2545 2233Email: [email protected], Website: www.emco-dynatorq.in

NON-RETURN VALVES

Caliber Valves offers a wide range of non-return valves for practically all process fluids. These valves are of lift check-

Page 104: Search - February 2013

104 SEARCH - THE INDUSTRIAL SOURCEBOOK | f E B R U A R y 2 0 1 3

General Products

scene input, inbuilt protection against over-heating and control of dimming speed. It is a compact device and can be fitted inside distribution boards along with other modular devices to control the lighting output as per users need.

Hager Electro Pvt LtdPune, MaharashtraTel: 020-41477500Fax: 020-41477510Email: [email protected]: www.hager.co.in

� pOWDer cOating bOOth

The primary purpose of the powder coating booth is recollection of over-sprayed powder for reuse. The booth

also acts towards containment of the over-sprayed powder within its confines, thereby preventing powder spillage in the work area.

The powder coating booth is designed to accommodate manual or automatic applicators on either one side or in a back to back fashion. This is defined by the article geometry and volume of production. The booth is engineered to be stationary or mounted on wheels or trolleys to reduce the cleaning time in case of high volume production plants

Page 105: Search - February 2013

f e b r u a r y 2 0 1 3 | SearCH - THe INDuSTrIaL SOurCebOOK 105

General Products

� battery chargeD fOrklift

The battery charged forklift includes two different designs; a three-wheel design ideal for

precision load placement in tight spaces and a four-wheel forklift. It features a self-diagnostics function which provides great convenience for maintenance of the forklifts. The high accuracy sensor

reminds the operator for regular service and increase safety. The forklift meets the IPX3 waterproof standard with the meticulous considerations in its proportional hydraulic control valves, control micro-switches, potentiometers as well as control signal circuits. With the reliable waterproof design, the trucks can easily be washed with running water. It has a safety valve that prevents fork dropping suddenly when hydraulic hose is damaged. A tilt lock valve cuts tilt cylinder and keeps the mast at a tilted angle when engine stops. Flow control valve prevents lift cylinder from dropping suddenly when under loading state. It has a reinforced

� enD mill re-sharpening machine

The end mill re-sharpening machine is used for 3 to 12 mm end mill re-sharpening at

adjustable angles. It provides precise grinding results and has a precision assurance within 0.02 mm. Center cutting is available with a high accuracy balance between each flute of the end mill. It is easy to operate, grinds an end mill within 1 minute and has special design high accuracy alloy steel collets with an accurate grinding consumption of 0.2 mm. It has a high efficiency DC motor, with a stable quality GE diamond dust grinding wheel, considerable design weighing only 14 kgs and is

by incorporating multiple booths for multiple colours.

Intech Surface Coating Pvt LtdPune, MaharashtraTel: 020-22922350-53, 3292 1279Fax: 020-22922252, 66524695Email: [email protected]: www.intechfinishing.com

delicate and user friendly.

J K Machines Corp

New Delhi Tel: 011-26361241/42Fax: 011-26361243Email: [email protected]: www.jkmachinescorp.com

Page 106: Search - February 2013

106 SEARCH - THE INDUSTRIAL SOURCEBOOK | f E B R U A R y 2 0 1 3

General Products

overhead guard and an intelligent control system with sensor under the seat and the safety belt. The sensor tests the weight and if operator ties the safety belt at the same time, only then the start button is activated.

Malati Machines Pvt LtdChennai, Tamil NaduTel: 04562- 289914Email: [email protected]: www.imaas.in

� machining centre

The model Variaxis I-500 features a multiple-surface, simultaneous 5-axis high speed vertical

machining centre. The machine is new in the I series and is available in different table sizes. The newest 5-axis machining centre are designed for exceptional versatility. It is equipped with high-

rigidity tables supported on both sides for large, heavy workpieces. Moreover, the machine also has 40 taper spindles with availability of optional spindle specifications to meet any production requirement. Table size is 500 mm - 400 mm, maximum spindle speed is 12,000 rpm and tool storage capacity is 30 tools.

Yamazaki Mazak India Pvt LtdPune, MaharashtraTel: 02137-668800. Email: [email protected]: www.mazakindia.in

� cable ties

Cable tie is used for routing, bundling and securing of cables, pipes and hoses. The

cable tie features internal serrations allowing for a positive hold onto cable, hose and pipe bundles. The design of the head guarantees a high

tensile strength while allowing a very low insertion force which combined with the bent tail design of many of the ties, ensures a simple and quick installation. There are three series of the cable ties; CP series, CPR series and CPU series. It possesses natural colour or weather resistant black. Operating temperature of the tie is -25oC to +95oC. It is manufactured in accordance to American Military Specification 23190 Drawing No. Ms 3367.

Novoflex Marketing Pvt LtdKolkata, West BengalTel: 033-22260513, 09830763634Email: [email protected] Website: www.novoflexgroup.com

Page 107: Search - February 2013

f e b r u a r y 2 0 1 3 | SearCH - THe INDuSTrIaL SOurCebOOK 107

General Products

� mOtOriseD lubricatiOn unit

Motorised lubrication unit is an electric driven pumps along with reservoir, oil filter and breather, suction strainer,

pressure relief valve, bleed valve, etc. This unit is suitable for single shot automatic oil lubrication. These units are made to run intermittently. During motor’s ON time, all the metering cartridges eject out predetermined amount of oil at various points of machine. During the OFF period, the same metering cartridges get recharged for the next lubrication cycle. If desired, this unit can be supplied without float and pressure switch as per customers requirement. Units for liquid grease are also manufactured.

Lubrite IndustriesPhagwara, Punjab Tel: 1824- 228438, 329988, 09814121288Email: [email protected], [email protected]: www.lubriteindustries.com

� brass fittings

Various types of brass fittings such as compression fittings, flare fittings, hose fittings, pipe fittings, forged parts, CNC turned parts, etc. are available. These fittings are

available in size ranging from ¼” to 1” and 6 mm to 20 mm with British Standards, DIN Standard, SAE Standards and according

Page 108: Search - February 2013

108 SEARCH - THE INDUSTRIAL SOURCEBOOK | f E B R U A R y 2 0 1 3

General Products

to customers requirements with latest technology and machineries. This product finds applications in all major manufacturing industries such as automobile, hydraulic and pneumatic low pressure fittings, textiles, heating and

cooling, tires, pipe, oil and gas, etc. They are available in custom-made designs as well.

Patel Brass Parts IndustriesJamnagar, Gujarat Tel: 0288 - 2561518Email: [email protected], [email protected] Website: www.patelbrass.com

� grinDing machine

Portable grinding machine is a tungsten grinder which is environment friendly and has the ability to grind quality points on

tungsten electrodes for TIG and plasma welding. It is equipped with an integrated dust filter thereby protecting operator and the environment against the unhealthy dust produced during the grinding of an electrode. It is able to grind

Page 109: Search - February 2013

f e b r u a r y 2 0 1 3 | SearCH - THe INDuSTrIaL SOurCebOOK 109

General Products

electrodes which are as short as 15 mm with a standard clamp, whereas with a special electrode clamp, it can grind electrodes as short as 8 mm. Power supply varies from 110-330 V, frequency 50-60 Hz, motor power 650 W, RPM 28000 and weight is 2.8 Kg.

SWIT IndiaBengaluru, KarnatakaTel: 080-42187117, 09741481117Fax: 080-42187118Email: [email protected]

� pilfer prOOf seal

Pilfer proof bag closure seal is an adjustable plastic strap seal that enables an effective stoppage and

avoidance of theft, security breach and fraud. These seals are ideal to protect your precious, genuine and branded products from contamination and fake products. Exclusive features are secure, reliable, versatile and strong, hot stamping for permanent impression, 7 digits sequential numbering, printed/high-rise company name/ logo, tamper proof spikes for better gripping. Applications areas include bulk drug, refineries, chemical industries, pharmaceutical industries, clinical waste, containers/ drums, postal department, courier bags,

Page 110: Search - February 2013

110 SEARCH - THE INDUSTRIAL SOURCEBOOK | f E B R U A R y 2 0 1 3

General Products

currency bags, vehicle doors, airline baggage, etc.

Novoflex Marketing Pvt LtdKolkata, West BengalTel: 033-22260513, 09830763634Fax: 033-22297814Email: [email protected]: www.novoflex.in

� pOrtable circular saW

Portable circular saw can effortlessly saw at high speed through all kinds of material such as steel, stainless steel, aluminum and copper.

It faces no problems sawing wood and plastic. Showers of sparks belong almost to the collector and

therefore the surroundings remain clean. The blade runners are lightweight and ergonomically designed. Besides, they are easily manageable, extremely precise and accurate in working. All blade runners are equipped with a variable angle setting. They are useful for fast and burr-free working and no greasing or cooling is required.

Consortech Tools (India) LtdPune, MaharashtraTel: 020-24445576, 65002414.Fax: 020-24445884, 24443838.Email: [email protected]

Page 111: Search - February 2013
Page 112: Search - February 2013

112 SEARCH - THE INDUSTRIAL SOURCEBOOK | f E B R U A R y 2 0 1 3

General Products

� cnc vertical machining centre

EX series contributes to machine tool by

performance and versatility, providing competitiveness to manufacturing companies based on a special design concept of travelling

column with all axis movements on tool tip and none on table for better dynamics and tool trajectory. This machine possesses versatility and capacity to carry out the maximum range of jobs within the working envelop with very high precision of dynamic positioning with total geometric, mechanical and thermal stability in structural parts. EX 1680 with X/Y/Z (1600/800/800 mm) has all axis movement on spindle head and a 20-tool ATC. Equipped with fixed table (2000X800 mm), it has high table load carrying capacity of 4500 kg with variants in table configuration, while C-axis option of rotary table-in-table of 700X800 mm is also available. High-power spindle with 8000 rpm (32.3/21.5 kW, BT40) comes as standard with options of ‘U-2’ position head and ‘P’-continuous servo axis for 5-axis head.

Jyoti CNC Automation LtdRajkot – GujaratTel: 02827-287412Fax: 02827-287480Email: [email protected]: www.jyoti.co.in

� DOuble siDeD lapping machine

Four-way double sided lapping or polishing machine has a unique features such as four way motion,

in-process plate conditioning and precise pneumatic pressure control during lapping, variable speed drive, slurry re-circulation system, etc. The upper and lower lapping plates rotate in opposite direction to each other. The carriers rotate about it while revolving in either

direction, thereby creating four way motions. It finds typical applications in lightening arrestors, compressor valve plates, automobile and aircraft parts, piston rings, watch glass, pump parts, shims, vanes washers, slip gauges, quartz crystals, semi conductor wafers and many more.

Speedfam (India) Pvt LtdNavi Mumbai - MaharashtraTel: 0251- 2620403 / 404 / 405Fax: 0251- 2620406 Email: [email protected] Website: www.speedfam.co.in

Page 113: Search - February 2013

f e b r u a r y 2 0 1 3 | SearCH - THe INDuSTrIaL SOurCebOOK 113

General Products

� 560 cnc hOrizOntal machining centre

HMC series are high speed, high precision

CNC horizontal machining centres with the best available features to match the demanding requirement of industry. May it be mass production or capability to machine large work pieces, these machines have special features to perform variety of operations starting from heavy roughing to precision finishing work. HMC 560 has thermally stable graded cast-iron body with widely spaced, heavily ribbed base, to damp vibration and enable higher cutting parameters with better accuracy and dynamic performance. Special design of twin ball-screw in x-axis with special box type structure gives ability for better rigidity, accuracy and dynamics. With x/y/z (780/730/750 mm), z-axis is on travelling-table while x and y-axis on spindle head and 40 tool ATC. Equipped with table (500X630 mm), it can accommodate workpiece of 800X950 mm. High-speed electro spindle with 10000 rpm (41 kW, SK50) comes as standard with b-axis on integrated direct-torque rotary

Page 114: Search - February 2013

114 SEARCH - THE INDUSTRIAL SOURCEBOOK | f E B R U A R y 2 0 1 3

General Products

table and an auto pallet changer for reduced ideal time for set-up.

Jyoti CNC Automation LtdRajkot, GujaratTel: 02827-287412Fax: 02827-287480Email: [email protected]: www.jyoti.co.in

� multi-tasking machine

The machine is a 5th generation multi-tasking machine. Done in one

processing integrex i-100ST. The machine is the newest member of the integrex I series 6” chuck. It helps reduce the machining time by utilising the milling spindle, second spindle and lower turret. The machine

features long strokes for large workpiece capacity with 5-axis simultaneous machining for complex workpieces. It performs processing from raw material to finished workpiece in a single setup. Moreover, the machine also has high-power spindle for heavy-duty cutting. Maximum machining diameter is 500 mm, max spindle speed is 6,000 rpm, max milling spindle speed 12,000

� fractiOnal electrO-DeiOnisatiOn

With patented dual voltage technology, the Fractional Electro-Deionization

(FEDI) technology is the next generation EDI technology for production of high purity water. Developed taking into account the limitations of conventional EDI, FEDI improves the reliability of EDI for the production of high purity water for power and semiconductor applications. Unlike conventional EDI, FEDI stacks are able to tolerate hardness in the feed water. As a result, FEDI can be used after single pass RO without the need for softening or second pass RO, on most feed waters. FEDI’s dual voltage

technology allows for a higher flexibility to inlet water conditions, thus lowering the risk of scaling and improving reliability.

Aquatech Systems Asia Pvt LtdPune - MaharashtraTel: 020 – 66547000, 7269, 09890343114Email: [email protected]: www.aquatech.com

Page 115: Search - February 2013

f e b r u a r y 2 0 1 3 | SearCH - THe INDuSTrIaL SOurCebOOK 115

General Products

� fire rOlling shutter

Fire rolling shutter is constructed with galvanised or stainless steel in a variety of gauges, slat designs and

finishes for unsurpassed strength, durability and style. Wide range of styles meet or exceed industry fire safety testing standards including UL, FM and ULC. The doors are also compliant with all NFPA-80 standards. The door closes automatically under governor control after separation of fuse link. UL-listed brush –type smoke gaskets satisfy smoke retardation requirements. Additional safety options include the fire sentinel time-delay release device photoelectric or ionisation-type smoke detectors with or without heat detector. Additionally, available uninterruptible power supply for use with motor-operated doors allows door closure

rpm and tool storage capacity is 36 tools.

Yamazaki Mazak India Pvt LtdPune, MaharashtraTel: 02137-668800. Fax: 02137-668829Email: [email protected]: www.mazakindia.in

Page 116: Search - February 2013

116 SEARCH - THE INDUSTRIAL SOURCEBOOK | f E B R U A R y 2 0 1 3

General Products

� pOrtable abrasive blaster

Abrasive blasting is an industrial process that entails forceful direction of abrasive

particle against the work surface to remove the contaminants, scale, rust and provide clean surface for cleaning and finishing of components prior to

painting, electroplating, epoxy coating and metallising. The portable abrasive blaster model ‘Ku-port’ can be used for cleaning on various metal surfaces like towers, bridges, steel structures, forged and die cast components, pipes, tanks, etc. The operation could also be performed on glass, ceramics, plastic, wood, stone and in handicraft industries prior to powder coating. Variety of media can be used as abrasives for different applications and finish. The basic features of Ku-Port are that it is low cost equipment which is available in different sizes; no electricity required, easy to carry, best suited to clean components of varying size and large structures

by central alarm or smoke detector under motor power. It has two to four hours fire rated resistance. It is compliant with BS 476 part 22/UL/FM/REI 120.

Gandhi Automations Pvt LtdMumbai, MaharashtraTel: 022- 66720200/66720300Fax: 022-66720201Email: [email protected]: www.geapl.co.in

� three phase heavy Duty inDustrial vacuum cleaner

The three phase heavy duty industrial vacuum cleaner is suitable for all industrial applications. All the

models are available in powder coated mild steel, partial SS and complete stainless steel constructions. Vacuum cleaner is built on sturdy trolleys and supplied with various accessories and filter options including HEPA to suit different industrial

applications in textile, food, pharmaceuticals, wood-working, engineering and electronics industries. It is equipped with high efficiency primary cyclone separators with secondary separators as cartridge filters / bag filters. It is also available for wet and dry applications. These are also modified for complete wet handling systems for extraction of machine coolants and swarf separation.

BlowtechMumbai, MaharashtraTel: 022-28458372/28457073Email: [email protected] Website: www.vacuumcleanerindia.com

Page 117: Search - February 2013

f e b r u a r y 2 0 1 3 | SearCH - THe INDuSTrIaL SOurCebOOK 117

General Products

� mini arc WelDing transfOrmer

Vulcan regulator type mini welder medium duty machines in 150, 200 and

250 amps ratings are compact, light weight arc welders. It is used for repair and maintenance jobs in medium duty cycles, light fabrication works, light production jobs in farms and small workshops, automobile garage and repair workshops. It yields high performance to cost ratio compared to any other machine in the market. It is built with latest trends in design and manufacturing and tested to most stringent standards to offer years of trouble free service. It is designed with modern looks,

at site. Recommended safety wears are supplied with Ku-Port like airfed blasting helmet model ‘Ku–2’, helmet air conditioner, air breather, operator suit, gum boots and hand gloves.

Kushal UdhyogJodhpur, RajasthanTel: 0291- 2764040, 09414301701Fax: 0291 2764041Email: [email protected]: www.kushaludhyog.com

Page 118: Search - February 2013

118 SEARCH - THE INDUSTRIAL SOURCEBOOK | f E B R U A R y 2 0 1 3

General Products

� alarm management Device fOr prOcess mOnitOring

With the new CombiSeries, a tailor-made alarm management system is

developed for the process industry. The easy-to-handle measuring instruments with flexibly programmable displays provide for new practical options in process monitoring. With the

CombiPress pressure gauge and CombiTemp temperature gauge, the CombiSeries can optionally be configured with a CombiView display. The CombiView displays provide an often helpful overview of the current status of individual processes directly on site. The measuring values do not have to be analysed first because the display indicates at a glance whether the preset measuring values are exceeded and immediate intervention is required. In practice, the principle of the CombiView is similar to a traffic light circuit: A clear signal indicates whether there is a need for action. The background color red is suitable e.g. for values that call for fast intervention. A green background could signal proper operation. The user can individually select and set his indication preferences himself.

Baumer India Pvt LtdPune, MaharashtraTel: 020 – 25286833Fax: 020 - 25286835Email: [email protected]: www.baumer.com

novel design concepts, epoxy powder coated body for long life and coil varnished by vacuum pressurised impregnating varnishing system.

Canary Electricals Pvt LtdMorbi, GujaratTel: 02822-250431Fax: 02822-250433Email: [email protected], [email protected]: www.vulcanwelding.net

� three phase heater pOWer cOntrOller

The ready to use compact three phase SCR power controller can be used for

electrical heating loads ranging from 1.5 KW to 12 KW/3-phase. This power pack module comprises of SCR triggering card model

LTC-15, rightly rated back to back connected SCRs (with electrically isolated base)- mounted on the heat sink. SCR devices are protected by glass fuses, thermal cutouts (thermistors) and RC-snubbers. Heavy duty

D E C E M B E R 2 0 1 0 | SEARCH - THE INDUSTRIAL SOURCEBOOK 181

WEST BENGAL INVESTMENT PORTFOLIO

HARNESSING GREEN ENERGYThe renewable energy sector in the state has shown remarkable improvement. Today, West Bengal is one of the leading states in the country with respect to utilisation of renewable sources of energy. Over one lakh families in West Bengal are now using electricity derived from sun, biomass and wind. As of now, the state has not seen any major renewable energy player, but with relaxation of government policies, big names are soon expected to enter this space.

“Very few states in the country have potential for renewable energy development and West Bengal is one among them. While the share of renewable energy is not huge, we currently have around 1.25 MW of green power, which is grid connected. We trying to harness this energy through the local grid system in various parts of the state. Support from the government is essential and we have been fortunate to get it throughout our operations,” said Joy Chakroborty, Divisional Engineer, West Bengal Renewable Energy Development Agency.

Another form of sustainable power generation that is taking shape in the state is biomass. Though this form of energy is in its nascent stages, it has provided potential contribution to power generation. “We currently have 67 MW of installed capacity through biogas plants in West Bengal. Of this, 18 MW is through the grid and the rest is off-grid,” says Chakroborty.

IMPROVEMENT AREASWest Bengal has seen considerable improvement in its industrial performance over the years. However, there are areas that have potential and can bring in substantial revenues for the state. “There is a need to invite more pharmaceutical companies to the state. While there are players existing, it is one area, which can see more participation,” feels Pal.

Financial support and incentives in the form of exemption from payment of Excise Duty & Income Tax for a specific period similar to that of Uttaranchal, Himachal Pradesh, J&K and the North East will go a long way in attracting investment into the state’s pharma sector. The government has recognised the importance of this industry, and developments like the setting up of chemical hub/PCPIR and a branch of the National Institute of Pharmaceutical Education & Research (NIPER) in the state indicate positive enthusiasm on the government’s behalf.

These developments coupled with the present conducive environment are expected to provide a fillip to the growth of the pharma sector in the region.

Tourism is another domain, which, while having vast scope, does not generate enough for the state. “West Bengal has much better potential in tourism than many other states, but it remains untapped to a large extent. Promotion of the state as a viable tourist destination needs to be done earnestly. The vast expanse of the state presents both natural and historical places of interest, which can be turned into exciting tourist destinations,” says Chakroborty.

THE STATE TO WATCH IN THE FUTUREThe existing sectors in the state are showing improvement over the years and are expected to witness heightened activity in the years to come. The fact that better infrastructure leads to higher investments has propelled the State Government to lay great emphasis on strengthening existing and building new infrastructure to encourage more investments.

Page 119: Search - February 2013

Invites You ToIndia’s Largest

SME GatheringManufacturing

Engineering &On

CUT

HER

E

Page 120: Search - February 2013

Auto & Auto Components | Chemicals & Allied Products | Testing & Measuring Instruments Electrical & Electronics | Hydraulics & Pneumatics | IT Products & Services | Automation Instrumentation | Material Handling Equipment | Packaging Machinery | Wires & Cables Machine Tools & Accessories | Pipes & Fitting | Plastics & Polymers | Safety & Security

Process Machinery & Equipment | Light & Medium Engineering

250+ participants | 20,000+ business visitors expected | 7, 250+ products on display Business transactions worth ` 80 crore expected | Spread over 15000 sq mtr

Showcasing more than 30 diverse industry categories.

22 - 25 February 2013Ayodhya Nagari Ground

10 am - 7 pm

AURANGABAD

Exhibitor Profile

CUT

HER

E

Page 121: Search - February 2013

f e b r u a r y 2 0 1 3 | SearCH - THe INDuSTrIaL SOurCebOOK 121

General Products

terminal connectors are provided for AC 3 phase supply, control signal and heater wires. The entire assembly is mounted on MS powder coated plate/enclosure, which in turn can be easily fixed inside the closed control panel as desired. Potentiometric settings are accessible to the user for on-site calibrations, max/min voltage output and ramp up/ramp down time adjustments. This model accepts the control signal from external DDC, PID or PLC controller in the form of (0-5)V, (0-10)V or (4-20)mA user selectable control signals. Thyristor based power controller has varied application areas and can be used with heating elements like nichrome, tungstan, kanthal, infra-red, etc.

Libratherm Instruments Pvt LtdMumbai, MaharashtraTel: 022-28963823, 28960569, 28964769Email: [email protected], [email protected]: www.libratherm.com

� prOgrammable lOgic cOntrOller

Micro to medium range of programmable logic controllers (PLC) has class leading memory capabilities and scan times. The PLCs follow industry standard IEC 61131

standards of programming and can be programmed in Ladder, FBD, IL, ST and SFC styles. The PLC software has dedicated function blocks for motion control rendering. Programming of stepper and servo motors is very simple and quick. It supports up to four axis of control with linear interpolation and also supports up to eight high

Page 122: Search - February 2013

122 SEARCH - THE INDUSTRIAL SOURCEBOOK | f E B R U A R y 2 0 1 3

General Products

� centrifugal pp mOnOblOck pumps

The PCX M series polypropylene (PP) monoblock pumps are used

for handling chemicals, loading and unloading tankers, acid pickling, etc. The casing, impeller and back plate are made of virgin

moulded PP. The shaft is covered with high alumina ceramic sleeve and mechanical seal of teflon bellow type with GFT v/s ceramic seal faces. These pumps eliminate the problem of pump and motor alignment generally faced in coupled type pumps. These also reduce chances of seal failure and provide long operating life. The pump comes with std. 415 V, 2900 RPM TEFC NFLP motor. The PCX M series pump is available in 1, 2, 3 and 5 HP models with capacity up to 40 m3/hr and maximum head up to 32 m.

Taha Pumps & ValvesSurendranagar, GujaratTel: 02752 – 240233Mob: 9825599415, 9825829875Email: [email protected], [email protected]: www.tahapumps.com

The pump has applications in oil and gas, chemical, pharmaceutical, industrial refrigeration, offshore platform, electronic and galvanising and nuclear plant areas amongst others. To safeguard the pumps, dry-running protection,

temperature monitors on rear casing and ATEX certification are also offered as options for many models. The seal-less magnetic driven pump is available in 26 designs with over 350 basic models. The wide range of pumps will help meet the customer’s exact process requirements.

Shanbhag & AssociatesMumbai, MaharashtraTel: 022-28346604, 28340071Fax: 022-28388334Email: [email protected]: www.shanbhags.com

� magnetic Driven pumps

The seal-less, magnetic driven pump is offered in centrifugal, peripheral, sliding vane, self-priming, centre-line mounted, inline and vertical pump versions. This

pump is manufactured in metallic and non-metallic constructions.

speed counters simultaneously. The software also has options of creating customised function blocks giving OEM customers the option of creating their own IP and protecting the same. The new FPOR PLC has dedicated function blocks for electronic gearing and print mark registration control which are very useful in packaging, labelling and bag cutting applications. The FPX PLCs have up to 8 high speed counters useful for applications such as liquid filling. The FP Sigma and the FP2 series complete the range of PLCs.

Strategi Automation Solutions Pvt LtdBengaluru, Karnataka Ph: 080-32329798/32467879Fax: 080-41163047Email: [email protected]: www.strategiautomation.com

� rOtary vane Oil free vacuum pump

Minivac RVD and MVC series of oil free vacuum

pump is direct coupled/belt driven and monobloc vacuum pumps mounted on common base frames. This is compact in size, vibration free and hence can be mounted inside the machines. It attains maximum vacuum levels up to 25” of Hg and capacities range from 50 lpm to 2000 lpm. Use of imported graphite vane give advantage of prolonged vane life, silent operation and reduces wear and tear on stator. It is useful in many applications like capsule printing machines and other pharmaceutical machineries, packaging / labeling machines, screen printing, plate making, book binding, folding machines, vacuum chucking, etc.

Shree Siddhi Vinayak IndustriesThane, MaharashtraTel: 022-28458372Fax: 022 - 28457073Email: [email protected] Website: www.minivacpumps.com

� hOllOW fiber ultrafiltratiOn mODules

Q-SEP hollow fiber ultrafiltration (UF) modules contain UF membranes manufactured with an innovative cloud point precipitation method. This process ensures a high

pore density along the length of the fiber and uniform pore size

Page 123: Search - February 2013

f e b r u a r y 2 0 1 3 | SearCH - THe INDuSTrIaL SOurCebOOK 123

General Products

� pipe bevelling tOOls

Pipe bevelling tools are fully portable for offshore pipelines and

onsite use and can bevel at any degree of angle including precision ‘J preps’ for automatic welding. It is designed for long life and ease of use and requires no special operator training, all clamp to the pipe I.D, employ direct-drive bearing supported gears and use the EscoLock blade lock system with interchangeable cutter blades to bevel, face, and bore simultaneously. A broad line of portable welding end prep tools for bevelling pipe ranging from 38mm I.D. to 914mm O.D. made of hard super alloys, offshore and in fabrication shops, is available with pneumatic, hydraulic and electric motors, depending upon model. They are suitable for bevelling stainless steel, super duplex, and P-91 alloys.

ESCO ToolMassachusetts - United States Tel: (508) 429-4441 Fax: (508) 359-4145Email: [email protected]: www.escotool.com

distribution in the membrane. Q-SEP modules deliver superior performance characteristics and product water quality that surpasses the quality from conventional UF modules, with low silt density index (SDI) and excellent rejection of bacteria and viruses. Q-SEP UF modules are made from a hydrophilic polyethersulfone material that provides high fiber strength and excellent low fouling characteristics, resulting in higher productivity. These hollow fiber membranes operate under low transmembrane pressure in an inside-out flow configuration for superior performance.

Aquatech Systems Asia Pvt LtdPune, MaharashtraTel: 020 – 66547000, 7269, Mob: 09890343114Email: [email protected]: www.aquatech.com

The information published in this section is as per the details furnished by the respective manufacturer/distributor. In any case, it does not represent the views of

SEARCH

Page 124: Search - February 2013

EVENT LIST

v

14-18 February, 2013VCCI ExpoFocus: Industrial and Allied productsWhere: Naulakhi Compound, VadodaraTel: 0265 - 2642291, 2636262, 2636969 Fax: 0265 - 2638050 E-mail: [email protected]

15-17 February, 2013IETF MANuFACTurINgFocus: Manufacturing IndustryWhere: pragati Maidan, New DelhiTel: 0124)-4014060 / 4014061Fax: (91)-(124)-4014088

5-7 February, 2013Expo MANuFACTurA 2013Focus: Manufacturing productivityWhere: Cintermex, Monterrey, N.L., 64010, MexicoTel: 52 (81) 8369 6969Fax: 52 (81) 8369 6911E-mail: [email protected]

ABROADNATIONAL

v

6-7 March, 2013DEsIgN & MANuFACTurINg souThFocus: TechnologyWhere: orange County Convention Center, orlando, usTel: 310-445-4200E-mail: [email protected]

19-21 March, 2013ELECTroNICA & proDuCTroNICA ChINA 2013Focus: Materials processing, production related servicesWhere: shanghai New International Expo CentreTel: +86-21-2020-5503Fax: +86-21-2020-5688E-mail: [email protected]

19-22 March, 2013AMpEr 2013Focus: Electronics, automation Where: Brno Exhibition Centre Tel: +420 221 992 144Fax: +420 221 992 139E-mail: [email protected]

ABROAD

v

8-10 April, 2013ChINA (shANghAI) INTErNATIoNAL WIND ENErgy ExhIBITIoN AND CoNFErENCEFocus: Wind energy Where: shanghai New International Expo Centre (sNIEC), shanghai, ChinaTel: +86-21-51978782 51978781 51978780Fax: +86-21-51010898Email: [email protected]: www.cwee.com.cn

17-18 April, 2013FAsTENEr FAIr INDIA 2013Focus: plant & Machinery, Tools & Tooling EquipmentWhere: Bombay Exhibition Centre, Mumbai Tel: +91 (0) 124 452 4207Fax: +91 (0) 124 452 4227Email: [email protected]: http://www.fastenerfair.com

17-20 April, 2013BLECh INDIA 2013Focus: sheet Metal WorkingWhere: Bombay Exhibition Centre, Mumbai Tel: +91 124 452 4207Fax: +91 124 452 4227Email: [email protected]: http://www.blechindia.com

ABROADNATIONAL

Page 125: Search - February 2013

EVENT LIST

AurANgABAD February 22-25, 2013

Tel: 022-30034651 • E-mail: [email protected] • Web: www.engg-expo.com

v

6-8 May 2013rENEWABLE ENErgy WorLD INDIAFocus: renewable energy generation, T&DWhere: Bombay Exhibition Centre, goregaon, MumbaiTel: +44 (0) 1992 656 621 (Int) +91 (0)124 452 4231 (Ind) Fax: +44 (0) 1992 656 700 E-mail: [email protected]

14-16 May 2013DEsIgN & MANuFACTurINg CANADA 2013Focus: Manufacturing equipment, componentsWhere: Toronto Congress Centre, Toronto, CanadaTel: +1 (416) 245 5000Fax: +1 (416) 245 4923E-mail: [email protected]

14-15 May 2013sMArTENErgyMArkET sEM Focus: Intelligent grids, energy storage solutionsWhere: MunichExpo Veranstaltungs gmbh, München, germanyTel: +49 (0)89/322991-16Fax: +49 (0)89/322991-19E-mail: [email protected]

ABROADNATIONAL

v

4-7 July, 2013ThE 5Th INDIA MAChINE TooLs shoW (IMTos 2013)Focus: Machine tools and automotive technologyWhere: pragati Maidan, New DelhiTel: + 91-79-26469725, 26460624, 26460453 Fax: + 91-79-26403087Email: [email protected] Website: www.imtos.com/index.html

2-4 July, 2013CoMposITEs ChINA 2013Focus: Industrial equipment & componentsWhere: shanghai New International Expo Centre (sNIEC), shanghaiTel: +86-10- 5933 9357 / +86-10-5933 9314Email: [email protected] Website: www.chinaexhibition.com

3-5 July, 2013 WIND poWEr ChINA 2013Focus: renewable EnergyWhere: China National Convention Center, BeijingTel: +86-10-6590 7766 ext 736Fax: +86-10-6590 6139Email: [email protected] Website: www.chinaexhibition.com

ABROADNATIONAL

v

18-20 June, 2013 AuToMATIoN TEChNoLogy Expo EAsT Focus: Manufacturing and automation equipments and productsWhere: pennsylvania Convention Center, philadelphia, usATel: +1 310/445-4200Fax: +1 310/445-4299Email: [email protected] Website: www.canontradeshows.com/expo/atxe13/index.html

6-10 June, 2013INTECFocus: Industrial machine tools sector Where: CoDIssIA Trade Fair Complex, Coimbatore, Tamil NaduTel: +(91)-(422)-2222396/2222397 Fax: +(91)-(422)-2222131Email: [email protected]: www.intec.codissia.com/index.php/site/index

6-8 June, 2013AuToMoTIVE ENgINEErINg shoW Focus: Automotive manufacturing sector Where: Chennai Trade & Convention Centre, Chennai, Tamil NaduTel: +(91)-(22)-32019137/40201000 Fax: +(91)-(22)-28324404Email: [email protected] Website: www.aes-show.com/index.aspx

ABROADNATIONAL

hyDErABAD May 31-June 3, 2013

Page 126: Search - February 2013

126 SEARCH - THE INDUSTRIAL SOURCEBOOK | F E B R U A R Y 2 0 1 3

EnginEEring Expo Ludhiana 2012

Exploring a horizon of opportunitiesGenerating tremendous response from the industry, Engineering Expo Ludhiana has proved to be a game changer for the machine tools industry in the region. Leveraging the vast potential and possibilities of the state, the Expo provided the perfect platform for accelerating business. Held during December 21–24, 2012, the Expo witnessed a wide range of business possibilities being unfolded. The four-day event received a robust response from the industry at large. A report…

Anwesh Koley

round Independence in 1947, Ludhiana had a handful of machine tools units and some units that manufactured hosiery

machines. Over time, units producing bicycle and auto parts entered the scene. Eventually, there came about the need for machine tools to meet the growing demand for mother machines in the country. That is when entrepreneurs established machine tools producing units in Ludhiana. Today, Ludhiana has evolved to become one of the major producers of mother machinery in India. Led by manufacturing leaders, Ludhiana is fast emerging as a leading investment destination in the northern belt of the country.

Capitalising on this vast growth potential, the Ludhiana edition of Engineering Expo organised by Network 18 Publishing, emerged as an eye opener. Inaugurated amid incredible industry response, the maiden edition of Engineering Expo Ludhiana and Punjab Machine Tools Show (PUMTOS) stood tall with potential on the very first day. The Expo not only highlighted the potential of regions like Punjab in northern India but also made it evident to manufacturers how they could have easy access to this manufacturer-friendly zone. Held at GLADA Ground, Ludhiana, during 21–24 December, 2012, the event generated commendable enthusiasm among exhibitors. Visitors too were excited about the prospects of a

show of such a magnitude being held in the developing industrial region of Ludhiana.

A GrAnD opEninGPositioned to add positivities to the manufacturing and machine tools industry in and around Ludhiana, the Expo saw business deals worth `10 crore in the first few hours of the trade exposition and an order book outlook looking potent with big business deals for the exhibitors, thus benchmarking itself with the best in class trade shows. Gracing the occasion and boosting the confidence of the industry, Hon’ble Minister of State for Industries and Commerce, Shri Anil Joshi, insisted, “We need a foolproof plan to promote the machine tools

industry in Ludhiana. The Ministry is willing to extend all possible support to the machine tools manufacturers to set up business. We have the right pool of manpower available, but we need exposure so that our machinery is accepted not only in India, but across the globe.”

The inaugural function was also attended by Ludhiana Mayor Shri Harcharan Singh Golwaria. Addressing the audience, he said, “A cursory look at the halls in the Expo clearly showed that the machinery available in Ludhiana can benchmark global quality. However, we are still heavily dependent on importing machinery. We need to reduce this dependence by spreading awareness about our machinery to the world.”

A

L-R: Pravin Bansal, District Chief – BJP, Punjab; Hakam Singh Giaspura, Ex-Mayor, Ludhiana; Deepak Ballani, National Programme Officer, UNIDO-ICAMT; Mahendra Singh Dhakad, Programme Director, UNIDO-ICAMT; Shri Harcharan Singh Golwaria, Mayor of Ludhiana; Sandeep Khosla, CEO, Network 18 Publishing; Shri Anil Joshi, Hon’ble Industry Minister, Govt of Punjab; Sukhdial Singh, President, CLMTM

Ludhianadecember 21–24, 2012GLada Ground

Page 127: Search - February 2013

F E B R U A R Y 2 0 1 3 | SEARCH - THE INDUSTRIAL SOURCEBOOK 127

EnginEEring Expo Ludhiana 2012

The other dignitaries present at the inauguration included prominent industry stalwarts like SSS Dhillon, Director, MSME Development Institute; Mahesh Khanna, GM, District Industries Center; Mahendra Singh Dhakad, Programme Director, United Nations Industrial Development Organization-International Center for the Advancement of Manufacturing Technology (UNIDO-ICAMT); Paramjit Singh, GM, Institute of Machine Tool Technology; Simarjeet Singh Bains, MLA; Deepak Ballani, National Programme Officer, UNIDO-ICAMT; Rajesh Jain, Sr Manager, National Small Industries Corporation (NSIC); Sukhdial Singh, President, Consortium of Ludhiana Machine Tools Manufacturers (CLMTM); Manjit Singh Matharoo, CEO, Matharoo & Matharoo Inc & General Secretary, CLMTM and Sandeep Khosla, CEO, Network 18 Publishing.

BoosTinG inDusTry sEnTimEnTsWhile Ludhiana has seen a flurry of enthusiastic entrepreneurs and investments, there are areas that still need attention. Elaborating further, Matharoo added, “Of late, the machine tools industry in Ludhiana is suffering due to lack of exposure and a platform to demonstrate its credentials. However, with an event like Engineering Expo, I am confident that we will successfully regain our lost ground.” The machine tools fraternity unanimously accepted that a platform, which can help the region showcase its industrial might, was needed. To this, Dhillon averred, “We need to organise similar events frequently in Ludhiana in order to bring our facilities and service providers together and discuss the requisite improvements for this sector in the region.”

An innovATivE pLATform for BusinEss possiBiLiTiEsVisitors at the show were amazed by the variety of machinery on display and found the event to be a first-in-

class arena to interact with industry players. Amit Takkar, Director, Takkar Industries, exclaimed, “I visited this Expo for the first time and I am pleased with the arrangements. The variety of machinery on display was commendable. An event of this magnitude has taken place in Ludhiana for the first time; the local industry should take full advantage of this opportunity.”

Another visitor, Abhishek Handa, Business Development Manager, Radeecal Communications, observed, “The Expo is appealing at first sight. Moreover, the companies exhibiting here are big names from the industry. I am quite satisfied with the overall arrangements at the Expo.”

Pankaj Jain, Manager, Rexam Bright Solutions, another visitor, also shared similar sentiments. He stated, “An event of this stature and scale is taking place for the first time in Ludhiana and I am pleased to see the quality of machinery on display. The choice of venue is an important factor for such events and GLADA Grounds is the perfect location to attract a large number of visitors. Such events should take place more often in Ludhiana.”

An EvEnT To rEckon wiTHThe exhibition halls saw a large number of visitors, of which many expressed

their keenness to exhibit in the Expo next year. Also, the exhibitors received considerable enquiries for their machines and were highly optimistic about generating substantial business. Substantiating the same, CS Sidhu, Director – Technical, GR Cranes & Elevators, said, “We have received a large number of enquiries at this event and expect most of these to convert into business. We have already sold machines to many customers.”

Another exhibitor, Robin Basant, Managing Partner, Basant Mechanicals, expressed, “The Expo plays a crucial role not only in business development but also in increasing profitability. Engineering Expo is considered to be an ideal platform for companies to foster growth through reach and awareness to their right target audience. Presented by Network 18 Publishing, Engineering Expo proves to be a perfect combination of a vast range of exhibitors, spacious venue, state-of-the-art amenities and humungous visitor turnout, which is crucial for exhibitors.”

Didarjit Singh, Proprietor, Karam Chucks, who also exhibited at the Expo, said, “Personally, my expectations from Engineering Expo at Ludhiana were very high and this Expo has lived up to my expectations. It has not only given us vast exposure but has also given us the confidence to launch some of our new products so that people who are not able to attend international shows, can find internal quality products in India.” Matharoo aptly concluded, “Engineering Expo is a great platform to showcase the industrial talent residing in smaller towns and cities of India. A place like Ludhiana has the skills to attract international manufacturers to India, and such Expos do a commendable job in assisting this.”

The next edition of the Engineering Expo will be held in Aurangabad during February 22–25, 2013.

[email protected]

250 exhibitors pan IndiaSpread over more than

12,000 sqm26,135 business visitors

visited across IndiaBusiness transacted worth

`195 crore*16,188 business leads

generated*20,000+ products displayed

from different industriesMore than 3,50,000 kg

machinery moved in for display* Feedback received from exhibitors

Highlights of this edition

Page 128: Search - February 2013

128 SEARCH - THE INDUSTRIAL SOURCEBOOK | F E B R U A R Y 2 0 1 3

is punjab ready to reclaim its manufacturing might?

This is the question that got the panelists and audiences thinking. The electrifying panel discussion, which was attended by over 200 prominent industry players, highlighted not only the progress and prospects of Ludhiana but also focused on the problems plaguing the region’s industrial development. Held on December 14, 2012, the panel discussion was aimed at finding ways to make Ludhiana a brand beyond hosiery and woollens.

eople define a place by its prospects. Going by this logic, Ludhiana is brimming with prospects and has a great future. A

panel discussion on the topic ‘Is Punjab Ready To Reclaim Its Manufacturing Might?’ was organised by Network 18 Publishing along with its partners United Nations Industrial Development Organization-International Centre for Advancement of Manufacturing Technology (UNIDO-ICAMT); Consortium of Ludhiana Machine Tools Manufacturers (CLMTM); National Small Industries Corporation (NSIC) and Association of Ludhiana Machine Tool Industries (ALMTI). Held at Park Plaza on December 14, 2012, this engaging panel discussion was attended by over 200 top industry personalities from in and around Ludhiana.

issuEs DEBATED The panel discussion brought forth the burning issues that are creating hurdles in the industrial progress of Ludhiana. During the discussion, Matharoo made a very valid point when he said, “The machine tools industry is

the backbone of the manufacturing sector and Ludhiana must make its presence felt in this sector globally. Till date, Ludhiana has provided an excellent environ for doing business, but the region has not received the attention it deserves. We require low-cost solutions for the machinery sector or else, we shall lose out to the world.

Being the manufacturing guru and a mentor to many, Shailesh Sheth impressed that amid lacuna, there is sufficient reason to be optimistic. He insisted, “Ludhiana has machine tools manufacturers and the market which uses these machines. We need to provide a platform for the two to interact and create awareness about various quality requirements. The entrepreneurial skill available in the region is well acknowledged by all; this has enabled Ludhiana to never run out of innovative minds. However, entrepreneurs must give up their micro-centric approach and think big; beyond the region first and then, globally.”

Fortunately, Ludhiana and Rajkot

are key industrial clusters, which have developed machines that are not manufactured anywhere in the country. To this, Swarup added, “We have the technical expertise and the minds to go a long way forward.” Talking about branding—a key requirement to have market presence—Matharoo averred, “We have to create brand awareness about the high-quality products we offer. We cannot expect the world to come to us; we have to tell them that we have arrived. ‘Made in Ludhiana’ should now be a brand beyond hosiery and woolens.” In his address, Dhakad stated, “Efforts should be made by the industries as well as the government to develop Punjab as the hub for global supply chain. Also, the industries need to focus on sustainable and inclusive growth avenues as it can define new horizons for their further development.”

Moderated by Archana Tiwari-Nayudu, Executive Editor, Network 18 Publishing, the panel discussion was followed by a question & answer session.

pThe eminent list of panelists comprised (L-R) Gaurav Swarup, Director, Marshall Machines Pvt Ltd; Manjit Singh Matharoo, CEO, Matharoo & Matharoo Inc, General Secretary, Consortium of Ludhiana Machine Tools Manufacturers; Shailesh Sheth, Corporate Secretary Advisor & Senior National Consultant, UNIDO; SC Ralhan, Federation of Indian Export Organisations (FIEO) Convenor of Punjab; Mahendra Singh Dhakad, Programme Director, UNIDO-ICAMT and VR Dahake, Scientist in-charge, CSIR-CMERI.

Anwesh Koley

pAnEL Discussion: LuDHiAnA

Page 129: Search - February 2013

F E B R U A R Y 2 0 1 3 | SEARCH - THE INDUSTRIAL SOURCEBOOK 129

EnginEEring Expo indorE 2013

Empowering SMEs, Expanding Market ReachThe manufacturing and allied sectors in and around Indore are experiencing a surge in business and investment like never before. Amid such promising prospects and tremendous untapped potential, Engineering Expo Indore 2013 emerged as a catalyst and added to the growth momentum of Madhya Pradesh. A report...

pallavi mukhopadhyay

s one of the emerging cities of India, Indore offers potentially lower costs, necessary and inexpensive infrastructure

as well as a suitable business environment for companies. Moreover, there is immense scope for innovative ideas to be nurtured in this region. Indore is a land of opportunities for small and large businesses alike. Today, Indore has opened its doors to both Indian and international investors. A hotspot for manufacturing units, the city has unleashed its mammoth potential of hosting new industries and tapping opportunities that await India.

A recent study by Cushman & Wakefield stated that Indore is one of the top 10 emerging cities of India for long-term business investment across industries. Madhya Pradesh houses more than five original equipment manufacturers and more than 100 auto component manufacturing facilities. Their market size is approximately US$306 million. Additionally, IT major Infosys is investing `600 crore In its proposed unit in Indore. Tata Consultancy Services is also investing `410 crore in the city. With the country’s first operational greenfield special economic zone spanning 1,038 hectare set up in Indore, an influx of investor and business opportunities will be seen along with an increase in job opportunities.

BooSTIng gRowThGiven the current spate of investments

across an array of industries in and around Indore, as well as those in the pipeline for the near future, this central part of India is poised for major industrial growth. In this context, Engineering Expo Indore 2013, which took place on January 11–14, 2013, at the Labhganga Convention Centre, emerged as a catalyst for the growth momentum of Madhya Pradesh. The Expo was spread across more than 10,500 sqm and showcased more than 8,000 products by over 208 exhibitors in 30 diverse industry categories.

With an outlook to augment business opportunities of the manufacturing and machine tools industry in and around Indore, the Expo saw business deals worth `72 crore and an order book with big business deals for the exhibitors, thus benchmarking itself with top class

trade shows.

InAuguRAl CEREMony: hIghlIghTSThe 5th edition of Engineering Expo Indore was successfully organised by Network 18 Publishing in association with Madhya Pradesh Electric Merchants and Contractors Association (MPEMCA) and Federation of Indian Export Organisations (FIEO). Amid promising prospects for a fast-emerging Madhya Pradesh, the Expo came alive with the lighting of the inaugural lamp in the presence of esteemed dignitaries comprising Krishna Murari Moghe, Mayor, Indore; Dinesh Patidar, Chairman & MD, Shakti Pumps (I) Ltd; Omprakash Gupta, President, MPEMCA; Amit Goyal, Chairman, FIEO; Ajay Sahai, Director General and CEO, FIEO and Sudhanva

A

(L-R): Omprakash Gupta, President, MPEMCA; Dinesh Patidar, Chairman & MD, Shakti Pumps (I) Ltd; Krishna Murari Moghe, Mayor, Indore; Amit Goyal, Chairman, FIEO; Ajay Sahai, Director General and CEO, FIEO and Sudhanva Jategaonkar, Associate Vice President, Network 18 Publishing

IndoreJanuary 11-14, 2013Labhganga Convention Centre

Page 130: Search - February 2013

130 SEARCH - THE INDUSTRIAL SOURCEBOOK | F E B R U A R Y 2 0 1 3

EnginEEring Expo indorE 2013

Jategaonkar, Associate Vice President, Network 18 Publishing.

In his inaugural speech, Moghe said, “I am pleased that Engineering Expo is being organised in Indore. We will benefit from the large business platform offered by the Expo. Business owners are getting a great opportunity to promote their brands and products through this Expo, which can contribute to the progress of not only the state but also the country and thus propel economic growth.”

While appreciating the contribution of Engineering Expo to the industries of the region, Patidar said, “This Expo has given a good platform to exhibitors. The industry, as a whole, and local customers are benefitted by it. I sincerely hope everybody’s business is boosted through this initiative. Today, the business fraternity in Indore needs to engage in continuous learning and development to keep up with the innovative and changing concepts of business processes and practices.”

Gupta encouraged the audience to leverage the Expo in furthering their business growth. He added, “Engineering Expo will help in increasing technical knowledge within the business community. I urge everyone to have a good time and take advantage of the Expo. This is a great chance for exhibitors to display a wide array of products and a golden opportunity for the industry to learn about the latest technologies available in the market.”

Addressing a packed audience, Goyal observed, “Madhya Pradesh is a progressive state, and small & medium enterprises comprise 80% of the business. I thank Network 18 for taking this initiative to help the manufacturing fraternity gain more mileage and engage in knowledge sharing. I wish all the participants the very best and hope for the exhibition to be a grand success.”

Sahai highlighted the role of this Expo and the importance of value addition in innovation for the manufacturing fraternity of the country.

He observed, “Indore has been seeing healthy annual growth and has a competitive edge due to the availability of manpower. Engineering Expo has been a trendsetter for the domestic as well as the export market. Innovation and R&D will be the growth drivers for the manufacturing sector in India, and the country promises great potential in this direction.”

Jategaonkar delivered the vote of thanks on behalf of the organisers and said, “I thank all our partners and participants who have helped us bring Engineering Expo to its current position of an insightful and engaging business forum. This Expo is intended for the overall benefit of the engineering and manufacturing industry, and we have plans to further strengthen its offerings in the years to come.”

An EMPowERIng ExPERIEnCE Engineering Expo Indore 2013 empowered visitors with the latest technologies and strategic industry insights. Being a transmission line (cables, energy metres, isolators) supplier, Deepak Lalwani, Proprietor, Deepak Traders, has been attending the Expo for the last three years. “I come to the Engineering Expo as I get an opportunity to learn about the latest technology, interact with the exhibitors

and see new machinery. Responses from the exhibitors are great. I think this is an excellent platform for buying and sharing,” explained Lalwani. Another visitor, Suneel Arora, Proprietor, Pooja Electronics, said, “The Expo has been a knowledge sharing experience. Such Expos are good for a city like Indore as it enables the industry to become familiar with the latest technology. I am having a great experience here.”

The exhibitors at the Expo varied from companies focused on green initiatives to those involved in providing identity and security solutions. Among the exhibitors, Nimesh Doshi, Owner, Asiatic Traders, said, “We are distributors of machine tools and are working towards green energy. We have launched solar panels in this edition of Engineering Expo. The Expo has been a success as all the stalls have 100% occupancy.”

Govind Agrawal, CEO, Anaxee Technologies Pvt Ltd, shared, “We deal in biometrics, identity management, fingerprint technology, face & iris recognition and metal detectors. The latest technologies we have launched at this Expo are new Adhaar authentication systems and JustLook face recognition systems. We are customising our Android-based applications for our clients and giving discounts to visitors who book here.”

An exhibitors’ directory comprising the listing of all the exhibitors at the Expo and their vital details was also unveiled. This wealth of information took the participants of the Expo a step closer in their quest to stay competitive in business. Engineering Expo attracted more than 12,000 visitors and buyers from in and around the city. With a great display of some of the latest machinery, tools and technology, the Expo catered to the diverse requirements of the manufacturing industry. The next edition of Engineering Expo will be held in Aurangabad during February 22–25, 2013.

[email protected]

Pan India participation by 208 exhibitors

Spread across more than 10,500 sqm

12,019 business visitors visited across India

Business transacted worth `72 crore*

More than 11,272 business leads generated*

8,000+ products displayed from different industries More than 75,000 kg

machinery moved in for display* Feedback received from exhibitors

Highlights of this edition

Page 131: Search - February 2013

F E B R U A R Y 2 0 1 3 | SEARCH - THE INDUSTRIAL SOURCEBOOK 131

PAnEl DISCuSSIon: InDoRE

Is Indore the next big investor’s magnet?on the sidelines of Engineering Expo Indore 2013, a panel discussion held on January 11, 2013, analysed in depth the prospects of and problems in the industrial progress of Indore.

n the wake of a welcome growth spurt in Madhya Pradesh, Engineering Expo Indore 2013 took a step forward and dug

deeper into the nuances of Indore’s growth story. A panel discussion was held after the inauguration of the Expo to help investors planning to set up businesses in Indore explore their horizons. Already established businesses explored the scope for further expansion not only outside Indore but also internationally. Serving as food for thought for industry leaders and professionals, this brainstorming session brought forth the highlights and lowdowns of investing in the central business district of the country.

Held on January 11, 2013, the panel discussion comprised an eclectic mix of leading industry experts including Dinesh Patidar, Chairman & MD, Shakti Pumps (I) Ltd; Bhupesh Trivedi, Head – Power Sales, Waaree Energies Pvt Ltd; Dr Gautam Kothari, President, Pithampur Audhyogik Sangathan; Ajay Sahai, Director General & CEO, FIEO and Amit Goyal, Chairman, FIEO. The panel discussion was moderated by Archana Tiwari-Nayudu, Executive Editor, Network 18 Publishing.

gRowTh on fAST TRACk Madhya Pradesh has come a long way since the 1980s. Today, investors are taking notice of the state due to its ideal geographical location, investor- & technology-friendly policies, progressive bureaucracy,

fast-improving infrastructure and cost effectiveness. Dr Kothari said, “Indore was known for its poor infrastructure, power issues and lack of government interest in the past. Today, the city is seeing better road, rail and air connectivity, growth of SEZs and a proactive government acting in the interest of the state’s development.”

Commenting on the need for such exhibitions to propel further business growth, Patidar observed, “Business houses in Europe and America await such Expos to launch their latest products. In India, we need to adopt similar practices and take part in as many Expos as possible to gain more brand visibility and further enhance their business prospects.”

nEED foR MoRE foCuS on ExPoRTSIndustries in and around Indore need to focus on research & development and innovation in order to match up to global standards. High-quality products, competitive pricing and superior packaging are the growth drivers for exports. Commenting on the scope for building a stronger export network for SMEs in Indore, Sahai stated, “Export is a long-term activity; a company’s credibility is of utmost importance. A substandard

product will hamper not just the image of the company but also the image of the country. Thus, businesses looking to begin exports must do field visits, conduct thorough market research and further explore their horizons before commencing exports.”

Further, Goyal elaborated, “Currently, Gujarat is the leader in exports, constituting 24% of the country’s export share followed by Maharashtra with 20%. However, Madhya Pradesh contributes only 1% of the total exports from India. It is imperative for Madhya Pradesh to take necessary steps and think global by conducting detailed studies of specific foreign markets and products for which FIEO is ready to extend its services.” In his observations on the action plan for the future, Trivedi explained, “Today, the State Government has a clear intent to enhance development.It is showing commitment towards driving industrial growth in the state. This new vigour is a welcome change. We must move out of our comfort zones, take more risks and expand our knowledge with every passing day.”

This engaging panel discussion, which was followed by a lively question & answer session.

I pallavi mukhopadhyay

(L-R): Bhupesh Trivedi, Head – Power Sales, Waaree Energies Pvt Ltd; Dinesh Patidar, Chairman & MD, Shakti Pumps (I) Ltd; Amit Goyal, Chairman, FIEO; Archana Tiwari-Nayudu, Executive Editor, Network 18 Publishing; Dr Gautam Kothari, President, Pithampur Audhyogik Sangathan and Ajay Sahai, Director General & CEO, FIEO

Page 132: Search - February 2013

132 SEARCH - THE INDUSTRIAL SOURCEBOOK | F E B R U A R Y 2 0 1 3

Export CompEtitivEnEss of Gujarat - vision 2020

FIEO adds exports’ edge to Entrepreneurship of Gujarat

With Gujarat already contributing about 24% of India’s exports (and still having scope to better its exports’ rate), the state’s prospects and the possibilities for exports got a further boost with the release of ‘Export Competitiveness of Gujarat - Vision 2020’—the report of a study conducted by FIEO. The report was released by Hon’ble Chief Minister of Gujarat Shri Narendra Modi at a day-long conclave organised by FIEO along with iNDEXTb and the Government of Gujarat, which included industry-enabling panel discussions. Network 18, being the media partner, was part of the action. A report..

ndia’s exports (of goods and services) to GDP ratio increased from 12.4% in 2006 to approximately 25%

(i.e., 16% goods and 9% services) in FY2012. Gujarat’s contribution to this percentage is a whopping 24%. The state has Revealed Comparative Advantage (RCA) in many commodities ranging from agriculture to high-value added products of global standards. Providing a boost to the exports from Gujarat and the country, at large, the Federation of Indian Export Organisations (FIEO), along with iNDEXTb (Industrial Extension Bureau) and Gujarat Government organised a day-long conclave on ‘Export Competitiveness of Gujarat - Vision 2020’ in Gandhinagar on January 9, 2013. The objective of this conclave was to bring all the stakeholders on one platform and discuss strategies to increase Gujarat’s share in the country’s exports to 35% by 2020.

The conclave was inaugurated by Hon’ble Chief Minister of Gujarat

Shri Narendra Modi. In his inaugural address, the hon’ble Chief Minister said, “We need to bring certain changes like increasing the credibility of our products so as to increase exports. This can happen only when we follow a zero defect policy in the manufacturing

IL-R: Mr Ajay Sahai, Director General & CEO, FIEO; Mr Maheshwar Sahu, Principal Secretary-Industries & Mines, Government of Gujarat; Dr Anup K Pujari, IAS, DGFT; Shri Narendra Modi, Hon’ble Chief Minister, Gujarat; Mr Rafeeque Ahmed, President, FIEO; Mr Amit N Goyal, Regional Chairman (WR), FIEO released the study on “Export Competitiveness of Gujarat: Vision 2020”

Building upon the brand image is very important to increase the exports market share of India in the

world. Further, an in-depth study is required so as to know in advance what the other countries need and at what time. Thus, if we study the market carefully, then in 2020, we can increase our exports considerably and Gujarat is constantly working towards this.Shri Narendra Modi, Hon’ble Chief Minister of Gujarat

Plenary Session 1: Achieving Inclusive Growth Through ExportsKey points of discussion and their solutions Presently, the export awareness is low in

the state. Hence, industries need to be educated about the export policies.

The industries need to have foresight and plan in advance to cater to the (domestic and international) markets demands.

The industries also need to aggressively invest in R&D.

In order to achieve inclusive growth through exports, the state needs to build on its infrastructure.

There is also a need to develop skilled manpower. This would not only boost the growth of the industry but also exports.

MSMEs in the state should be motivated to participate in international exhibitions, etc.

(L-R) Bharat Chhajer, Immediate Past Chairman, Powerloom Development & Export Promotion Council; Aman Chadha, Chairman, Engineering Export Promotion Council; Dr Anup K Pujari, IAS, DGFT, (also Moderator of the panel discussion on ‘Achieving Inlcusive Growth Through Exports’); Kamal Dayani, IAS, Industries Commissioner, Industries Commissionerate and Dr KS Momaya, Professor – Export Competitiveness, IIT-Bombay

Page 133: Search - February 2013

F E B R U A R Y 2 0 1 3 | SEARCH - THE INDUSTRIAL SOURCEBOOK 133

Export CompEtitivEnEss of Gujarat - vision 2020

sector. Also, formulating long-term plans with extensive research and advance planning can help in this regard. Thus, if we study the market carefully, then in 2020, we can increase our exports considerably. Gujarat is constantly working towards achieving this.”

ENCOMPASSING A 360O VIEW At the conclave, Shri Narendra Modi released ‘Export Competitiveness of Gujarat: Vision 2020’, the report of the study undertaken by FIEO. At the report’s inaugural session, Dr Anup K Pujari, IAS, Directorate General of Foreign Trade (DGFT), stated, “The report has taken into account all the

sectors. The suggestions made in it can be easily adopted by other Indian states as well.” The report is based on extensive desk research and secondary data review as well as focused primary research through field visits involving spectrum of entities including manufacturers, exporters, trade promotion bodies, export promotion councils, associations, importers, buyers and distributers.

Throwing light on Gujarat’s export potential, Rafeeque Ahmed, President, FIEO, stated, “Gujarat ranks first

when it comes to exports, but it still has a lot of hidden potential that can be explored.”

DOublING THE PrOSPECTSThe World Bank Study titled ‘Unleashing India’s Innovation’ (2007) observed that India had increasingly become a top global innovator in high-tech products and services. Yet, the country is underperforming in terms of its innovation potential. India spends less than 0.9% of its GDP in the area of R&D, which covers basic research, applied research and experimental development. Most developed countries are spending over 2% of their GDP on R&D, giving clear indication of what is stopping India from growing further.

In this backdrop, the discussions held at the conclave led to various suggestions and recommendations. The event proved to be a major success and provided definite grounds for increasing exports from not only Gujarat but the whole of India. As Ahmed aptly concluded, “The initiatives taken by the Gujarat Government needs to be replicated by other states. This would help us double our share in global trade by 2020. The global trade is expected to touch US$62,000 billion by 2020; doubling India’s share in global trade (from 1.75% to 3.5%) would require our EXIM trade to reach US$2,200 billion from the present level of around US$750 billion.”

There is a need to set up a nodal agency for export awareness in the state so that manufacturers are

informed of global opportunities. Second, common testing and accreditation facilities should be set up in some of the importing countries. The entrepreneur should be given overseas exposure through the market development schemes of the State Government. Also, an air cargo hub should be established in Surat to facilitate diamond exports.Rafeeque Ahmed, President, FIEO

Plenary Session 3: Empowering Entrepreneurship And InnovationKey points of discussion and their solutions Although manpower is available in

abundance in the state, steps need to be taken to develop skilled manpower. This will help increase the possibility of developing Gujarat as a ‘Knowledge-intensive Export Hub’.

The government and industry need to promote industry-academia collaborations. Also, the industry should invite students for factory visits and academia should look for on-the-job training in the industry. Initiatives taken in this direction will help empower entrepreneurship.

Availability of adequate finance is also a problem; the government needs to take steps in this regard.

Prof Basant Rakesh, IIM-Ahmedabad (2nd from left) moderates the panel discussion on ‘Empowering Entrepreneurship And Innovation’. The panelists included (L-R) RJ Shah, Principal Chief Industrial Advisor, Industries Commissionerate, Government of Gujarat; Pradeep Udas, Executive Team Member – Leading Markets of India, KPMG and Om Prakash Hisaria, Sr VP, Reliance Industries Ltd

Plenary Session 2: Propelling Investments For Gujarat’s Greater role In India’s Manufacturing And Exports

Key points of discussion and their solutions To attract investments to Gujarat, there is

a need for continuous innovations. If Gujarat wants to achieve the status of ‘Global Exporting Hub’, then setting up laboratories for testing new products is essential.

Industries should take all the possible steps to ensure that they manufacture zero-defect products. This would increase exports and lure investments into the state.

Industries also need to adopt right branding strategies to promote exports.

The government should work towards allocating sufficient funds to SMEs as this will help them take up R&D initiatives.

(L-R) Arun Seksaria, Managing Committee Member, FIEO; BB Swain, IAS, VC & MD, GIDC; Archana Tiwari-Nayudu, Executive Editor, Network 18 Publishing (Moderator of the panel discussion); Khalid Khan, Managing Committee Member, Convener - Committee on FTP/WTO/RTA (FIEO - WR) and Ritesh Singh, Chief Economist, Raymonds Ltd

Page 134: Search - February 2013

134 SEARCH - THE INDUSTRIAL SOURCEBOOK | F E B R U A R Y 2 0 1 3

EnginEEring Expo AurAngAbAd 2013

Leveraging market trends, expanding opportunitiesFrom being a mere tourist attraction centre to a manufacturing hub, Aurangabad’s journey has been glorious. The city has been growing at a healthy pace over the past few years and is expected to witness a rise in the years to come. Capturing this majestic proposition is the second edition of Engineering Expo Aurangabad. Slated to be held between February 22 & 25, 2013, this trade show promises to be the right connect between organisations and the growth forecasts. A preview...

Nishi Rath

xploring new markets and providing the right platform for emerging opportunit ies has been the backbone

of Engineering Expo ever since its inception. Having captured the manufacturing essence of regions like Ahmedabad, Pune and Chennai while providing them a manufacturing thrust, the second edition of Engineering Expo Aurangabad is all set to help one and all leverage on the opportunities and brighter prospects of this fast developing manufacturing hub.

It all started when Bajaj Auto Ltd entered Aurangabad in the 80s and was followed by Videocon. This move threw open a land of opportunities for Small and Medium Enterprises (SMEs) and the region’s growth prospects took an upward swing with major players like Skoda Auto, Varroc Engineering Pvt Ltd, Endurance Technologies Pvt Ltd, Man Diesel India, Can-Pack India and Siemens venturing into the region. Since then, SMEs have been contributing a fair share to the manufacturing sector and thereby, to the region’s growth. According to experts, Aurangabad is now one of the classic examples of efforts towards balanced industrialisation.

GrowTh oF SMEs One of the favourite investment destinations, Aurangabad is known

to be one of the fastest growing cities in Maharashtra. This has led to an array of business opportunities for SMEs in the region. Aurangabad has over 3,405 medium- and small-scale units generating about 36,871 jobs with an investment of `404.86 crore. It is estimated that by 2020, these units will grow to 9,000, generating about 95,000 jobs with an investment of `1,050 crore.

In this era of cost competitiveness, when everyone is looking at controlling the overheads and reducing cost, the existence of SMEs is a must. After all, SMEs help make the business models of Original Equipment Manufacturers (OEMs) more flexible. And with Aurangabad emerging as an attractive destination for auto giants, SMEs definitely have a great future here!

SEZs And IT: ThE GrowTh CATALySTThe growth of Aurangabad can be traced to the time when Maharashtra

Industrial Development Corporation (MIDC) started acquiring land to set up industrial estates. Today, Aurangabad boasts of Shendra, Chikalthana and Waluj MIDC industrial areas that are significant zones on the outskirts of Aurangabad. These areas, over the years, have witnessed a steady flow of investment and are home to both national and multinational players.

The sectors that have attracted major investment in the region are automotive, engineering and pharmaceutical. In the last few years, the engineering and automotive sectors have significantly picked up, giving a boost to the entire industrial fraternity

E

250+ exhibitors expected20,000+ visitors expectedBusiness transaction worth

`80 crore expected7, 250+ products on displaySpread over an area of more

than 1,50,000 sq ftShowcasing more than 30 diverse industry categories

Highlights of this edition

250 exhibitors18,013+ business visitors

from across India17,000 business leads

generatedBusiness transacted worth

`70 crore6,250+ products displayed

from different industries1, 00,000 sq ft area

occupiedMore than 1,10,000 kg

machinery moved in for display83% exhibitors got the expected

visitors at the show180+ delegations

Glimpses of previous edition

AurAngAbAdFebruary 22-25, 2013Ayodhya nagari ground

Page 135: Search - February 2013

F E B R U A R Y 2 0 1 3 | SEARCH - THE INDUSTRIAL SOURCEBOOK 135

EnginEEring Expo AurAngAbAd 2013

here. Aurangabad is the third city in Maharashtra after Pune and Nashik to offer an automotive cluster. Skoda Auto manufactures its models Superb, Laura and Yeti; Passat and Jetta for Volkswagen and the A4, A6 and Q5 for Audi from its Aurangabad facility. Recently, Bajaj too launched its first four-wheeler manufactured in its facility in Aurangabad.

E l a b o r a t i n g f u r t h e r , Chandrashekhar Patil, Partner, Veera Compressor, explains, “The presence of some major auto giants has helped SMEs bloom in Aurangabad. Although the market has been down for some time, we are looking forward to better times ahead. SMEs definitely have a bright future in this region and are poised for growth.”

While the auto industry has made it big in Aurangabad, pharma giants like Wockhardt, Lupin and Glenmark have also made their presence felt. Going ahead, the IT industry has started taking baby steps in Aurangabad and the coming up of Software Technology Parks of India (STPI) has given it a further push.

With Aurangabad sprinting towards additional growth opportunities and with the region successfully bagging major investments, it is only a matter of time when it will attract the attention of IT giants. Besides, with IT hubs like Bengaluru, Pune and Hyderabad already reaching saturation, software professionals are looking to newer avenues—a factor that could draw their attention towards Aurangabad.

Aurangabad has a lot of opportunities and is relatively cost-effective as compared to other developing cities. As a result, not only professionals but also medium-sized companies and first-generation entrepreneurs who want to try their hands in this industry are considering investing in Aurangabad.

EnGInEErInG Expo: hArbInGEr oF GrowTh By marking its presence in promising

regions, Engineering Expo has always believed in showcasing a region’s potential to the right audience. Highlighting the scope that Engineering Expo has provided for SMEs and MSMEs, Jeevan Deshpande, Proprietor, Samarth Machinery, exclaims, “Engineering Expo has provided us a good platform. It has become a motivation for traders here. The variety of machines displayed at the event depicts the might of this place.”

Deshpande adds, “We were part of the first edition and were happy to find the right audience to connect with. Thanks to the Expo, we were able to convert these inquiries into good business. This year, too, we expect to do some good business.”

Today, Aurangabad has become an emblem of an altogether di f ferent Maharashtra—the booming, increasingly urbanised, economic powerhouse. With huge industrial presence of significant corporate players, the city is buzzing

with activity. Commenting on the value

proposition of the Expo, Sandeep Khosla, CEO, Network 18 Publishing, says, “After 10 successful years of service to the industry, Engineering Expo today has established itself as India’s largest multi-location trade show on manufacturing. The Expo is a preferred destination for small and medium enterprises as well as manufacturing & engineering organisations to further their growth and that of the industry at large. For the 2012–13 season, we have eight editions spread across an equal number of locations of a rising India. Keeping our esteemed exhibitors and valued customers in mind, we have made elaborate provisions to offer a unique experience. This, we reckon, will add substantial traction to the industrial growth of the nation.”

First-time exhibitors are also hopeful to attract target customers. Sharing the excitement of a first-time participant, Kusum Soni, Proprietor, Akshay Heaters, states, “We are participating in Engineering Expo for the first time and expect to interact with representatives from various engineering-based companies from different regions/states. We are hopeful that the event will be a great success with audiences from various engineering fields participating in the event.”

proMISInG FuTurE Aurangabad boasts of a very strong brigade of young and enthusiastic first-generation entrepreneurs, who not only bring new ideas into implementation but also steer the region’s growth. With the enthusiasm and optimism riding high among this new brigade of entrepreneurs, Engineering Expo Aurangabad is set to provide a much deserved platform for developing business opportunities while leveraging the market trends.

[email protected]

Panel discussion aims at providing a roadmap to infuse growth in the region

Institutional Buyer Involvement Plan to attract delegations from large corporate and major institutions

Improvisedvisitorprofiling—profile,scan,filterandbringinvisitorsasperexhibitors’requirements

ProvidingbusinessnetworkingsupporttoexhibitorsbyleveragingNetwork18Publishing’sindustryconnect

Credit rating facilities for the benefitofexhibitors

Providing complete travel solutionstoexhibitors

Offering logistics services to ensuresmoothcargohandling,customclearing,transportcompliance,etc.

nEw ATTrACTIonS In ThIS EdITIon

Page 136: Search - February 2013

product index

136 SEARCH - THE INDUSTRIAL SOURCEBOOK | f E B R U A R y 2 0 1 3

Looking For A Specific Product?Searching and sourcing products were never so easy.

Just type SRCH (space) Product Name and send it to 51818

eg. SRCH Pump and send it to 51818

560 CNC horizontal machining centre 113AC geared motor 117AC motor 61,FGFAC servo motor 117Accessories 8Acoustic enclosure 101Adaptors for drilling 84Air gauge 99Air operated diaphragm pump 46Alarm management device for process

monitoring 118Alu-cera polymer 7Aluminium oxide ceramic composite 7Analog timer 27Annunciator 17Apron conveyor 100Auto belts and oils seal 25Automatic rolling shutter 19Automation 20Automotive automation 91Axial flow fan 117Ball 112, 121Ball bearing 118Battery charged forklift 105Battery operated pallet truck 85Bearing 22, 93, 118Belt conveyor and gravity roller 114Benchtop press 103Brake motor 24, 61, FGFBrass accessories for switch 77, 107Brass building hardware 77, 107Brass cable gland 77, 107Brass component 77, 107Brass electrical wiring accessories 77, 107Brass extrusion rod 77, 107Brass fitting 107Brass Indian cable glands and accessories 77, 107Brass neutral 77, 107Building automation 20Busines centre 83Cable and hose carrier 75Cable carrier 22Cable conduit 21Cable connector 22Cable gland 59,123Cable ladder 100Cable ties 59,106,123Cable tray 100Cam follower 16

Product Pg No

Camwork 103Castor 104Catering conveyor 96Centrifugal air blower 117Centrifugal PP monoblock pump 122Centrifugal pump 39Chain 22, 25Chain pulley block 24, 108Chrome bar/ shaft 121Clamp hose pipe 109Cleaning equipment 139CNC BICCNC cutting machine 20CNC hydraulic turret punch press 106CNC laser cutting machine 20CNC machine BICCNC oxy fuel cutting machine 20CNC plasma cutting machine 20, 106CNC press brake 106CNC synchro press brake 106CNC tap chuck and tap adaptor 84CNC tap holder and pull stud 84CNC tools holder and pulley stud 84CNC turning center BICCNC vertical machining center 112, BICCo2 generator 96Coating machine 20Coating plant 20Coating system 20Coil spring 109Componet handing system 91Compressed air division 105Connector 6, 8, 22, 63Consumer automation 91Container pump 46Control cabinet 63Control panel 63, 103Control system 63, 103Conventional and mono block pump 100Conventional phase failure relay 27Conveyor 104Conveyor and automation system 19Coolant accessories 100Coolant pump 100Counter 17, 27Coupling element 116Crab 108Crab assembly 99Crab hoist 24

Product Pg No

Crane 24, 99, 102, 108Crane duty motor 24, 143Crane kit 99Cross connection ACC 8Cryogenic valve 5Cushion dock shelter 19Cutting machine 20Cylindrical grinding machine 108D.A / Glyd seal with NBR/FKM

Oringchevron setstrip 116DC motor 61, FGFDC switch disconnector 23Dehumidifier 98Dfmpro 103Didactic equipment for training 63Digital reachout system 99Discharge frame 100Distrubution board 10Dock leveller 19Dock shelter 19Door - PVC flap 19Door - PVC strip 19Door - rapid flexible 19Door - rapid roll up 19Door - sectional overhead 19Door – telescopic 19Double girder E.O.T crane 99Double sided lapping machine 112Drill chuck 105Drive 117Drum pump 46Dry ice blasting machine 96Dry van pump 101Ducting insulation 26Duel fuel burner 117Earth and fuse bar 77, 107Edrawings publisher 103Electric actuator 66Electric wire rope hoist 24, 99,116Electrical product 59,123Electro mechanical servo system 103Electronic process control instrument 115Electronic product 59,123Electronic timer 17, 28-35Electropneumatic positioner 97Element shrink disc 16Elmcbs 141Encoder 117End clap/shop 8

Product Pg No

Page 137: Search - February 2013

Website: http://eshop.infomedia18.in

Page 139: Search - February 2013
Page 140: Search - February 2013

product index

140 SEARCH - THE INDUSTRIAL SOURCEBOOK | f E B R U A R y 2 0 1 3

End mill re-sharpening machine 105End plate 8Energy meter 17Energy savings cogged and

poly Vbelt drive 25Engine and transmission assembly 91Engineering plastic plug and socket 28-35EOT crane 24, 116EOT JIB crane 102EOT/HOT crane 108EPDM 107Event 111Exhibition - Engineering Expo 119Exhibition - Metering India 2013 82Exhibition - VCCI 2013 54Extended trolley 99Factory automation 20, 117Fail safe assembly system 91Fire rolling shutter 115Fixed mounting hoist 99Flame proof hoist 108Flame proof motor 61,143, FGFFlange mounted onload tap

changers for transformer 99Flange mounting motor 61, FGFFlat high tension single-twin ignition 7Floating holder 84Flooring insulation 26Flow meter 46Fluid bed dryer 117FMCG and auto comp 91Fractional electro-deionisation 114Freewheel-oneway-clutch 16Furnace automation 48Gantry crane 24, 99, 102Gap frame press 121Gas distribution panel 100Gas distribution screen 100Gear box 108, 116, 117 Gear motor 24, 61; 116, FGFGeomcaliper 103Glass linear encoder 99Glide wheel 104Goliath crane 24, 108Goods lift 102, 108Grinding machine 108Grinding media 7Guide band 116Guide rod 121Handling system module 63Hard chrome plating bar 121Heat shrink tubing 59,123Heavy duty forged steel castor 114Heavy duty lathe machine 108

Product Pg No

Heavy duty TTR castor 114Helical gear box 116High alumina wear resistant ceramic tile 7High carbon chrome 112High carbon steel ball 112High discharge flooding type pump 100High efficiency standard motor 143High pressure jet clean equipment 110High voltage testing equipment 113Hoist with trolley 99Hold back 16Hollow fiber ultrafiltration module 122Horizontal CNC machine BICHorizontal machining centre BICHose clamp 109Hospital equipment 110Host ring 106Hot water generator 117Hydraulic manual pallet truck 85Hydraulic press 121Hydraulic press brake 106Hydraulic seal 73Hydraulic sealing solution 116Hydraulic shearing machine 106, 121I/P transducer 97Imaging and vision system 20Indirect air heater 117Inductive proximity switch 21Industrial belt 25Industrial ceramic 7Industrial electric power

distribution system 10Industrial hose 25Industrial ID reader 98Industrial oven 117Inline helical geared motor 143Instrumentation and control 12-13Instrumentation control panel 115Insuboard 26Insulation 26Insureflector 26Insushield 26Insusound 26Interface module 8Interface modules ACC 8Internal for electrostatic precipitator 100Inverter duty motor 143Isolator 49Isolators and DBS 141JIB crane 24, 99, 108Keyless transmisson element 16Ladder 110Large diameter welded pipe 123Large helical gear box 143

Product Pg No

Lathe machine 108LED 21LED egress route 41Led emergency 41LED flash light 41LED signal tower light 28-35LED solar street 41Lifting solution 106Light 41Light duty lathe machine 108Lighting solution 41Limit switch 28-35, 97Limit switch box 66Linear rod 121Liquid pump 46LM shaft 121Load break switch 21Low-emission valve 5Machine tool 48Machine tool accessories 84Machining centre 106Magnetic driven pump 122Magnetic linear encoder 99Main and sub-system assembly

automation 91Marker 8Marker plotter 8Material handling 48Material handling equipment 24, 85Mcbs 49,141Mechanical press brake 106Medium duty lathe machine 108Metal cutting tool FICMetal-seated valve 5MGM brake motor 47Micro switch 28-35Mill lining block 7Mini arc welding transformer 117Monitoring 103Monorail trolley 108Motion control product 117Motor 61, FGFMotor protection circuit breaker 21Motorised chain pulley block 108Motorised lubrication unit 107Mounting bracket 8Multistage high pressure pump 100Multi-tasking machine 114Munting rail 8Neoprene 107Nitrile rubber products 107O ring 73Oilseal 110On/off ball valve 66

Product Pg No

Page 141: Search - February 2013
Page 142: Search - February 2013

product index

142 SEARCH - THE INDUSTRIAL SOURCEBOOK | f E B R U A R y 2 0 1 3

On/off butterfly valve 66On/off control valve 66On/off plug valve 66Over crank shearing machine 106Oxy fuel cutting 106Pakaging paper pulp 48Panel meter 27Paper cone machine 14Paper tube machine 14Parallel shaft helical geared motor 143Partition plate 8Parts for pollution control equipment 100Pedestrian and rider operated counter

balanced pallet truck 85Perforated metal screen 100Phase failure relay 27Phase monitoring device 17PID controler 115Pilfer proof seal 109Pilot light 21Pipe bevelling tool 123Pipe joints clamp system 114Piping insulation 26Piston bar 121Piston seal 116Plastic film capacitor 100Plat truck 104Plate bending machine 106Platform 110PlC’s 117Plug and socket 21Pneumatic actuator 66Pneumohydraulic 103Portable abrasive blaster 116Portable circular saw 110Powder coating booth 104Power 103Power press 106, 121Power transmission accessories 25Precision switch single and multiple 21Press 103Press brake machine 121Pressed steel castor 114Printing 48Process automation and control equipment 63Programmable logic controller 121Proximity sensor 28-35Pump 39, 46, 39, 101, BCPush button 21Quick change tapping chucks and

tap adaptors 84Rapping bar assembly 100RCCB 49Reaming and tapping 84Rear cylinder hydraulic press brake 121Reels for confined sanitary space 98Relay 27Rice rubber roll 25

Product Pg No

Rolled ring 93Roots blower 101Rope guide 99Rotary shaft seal 73Rotary switch 21Rotary vane oil free vacuum pump 122Rubber product 110Safety control 103Safety protection device 21Sand and shot blasting machine 103Scada 117SCR bess power regulator 115Seal 110, 116Seamless pipe 123Separator plate 8Service and manufacturing industry 83Shaft 121Shearing machine 121Silicone 107Single convertor isolator module 115Single girder E.O.T crane 99Single limit switch 21Slipring crane duty motor 61, FGFSmps 17Socket and switch 8Solderless terminal 59,123Solid carbide drill FICSolid carbide drills with IC FICSolid carbide mill FICSolid carbide reamer FICSolid carbide reamers with IC FICSolid carbide special drill FICSolid carbide special mill FICSolid carbide special reamer FICSpace sector 91Special application motor 143Speciality fastener 106Spray gun 105Spray painting equipment 18Stainless steel 112Stainless steel pipe 123Steam boiler 117Steel ball 93, 112Steel industry 48Stepper motor 117Super finishing film - variofilm 97Surface grinding machine 108Switch 5, 49, 141Switch disconnector 23Switchgear 5,23, 141Tachometer 17Technical ceramic 7Temperature controller 17, 27Temperature indicator 27Temperature sensing 115Temperature transmitter 115

Product Pg No

Tensioner nut 16Terminal block 8Textile and yarn trolley 110Thermal imaging camera 65Thermal insulation 26Thermic fluid heater 117Thermocouple cable 115Thermocouple sensor calibration system 115Three phase heater power controller 118Three phase heavy duty industrial

vacuum cleaner 116Time switch 17Torque motor 143Track roller 16Transfer trolley 108Tray dryer 117Trolley 104Trolley wheel and castors 110Tube 123Tube sheet assembly 100Tubing accessory 63Twin castor 114‘U’ tubes 123Universal dimmer 103Universal quick change chuck 84Vacuum booster pump 101Vacuum system 101Valve 5, 63Valve for power 5Valve positioner 66, 97Valve terminal 63Vertical turret milling machine 99Video measuring machine 99Viton 107Void-fill packing system 97Waste and water treatment 48Water exhibition 104Water faucet and tap part 7Water purifier 96Wave spring 109Weighing application 48 Welded pipe 123Welding equipment 105Wheel 104, 114Wheel assembly 116Wheel barrow 104Wheel chute and accessories 114Winche 102Winche and material handling machine 112Wiper 116Wire connector 59,123Wire rope drum 116Wire rope hoist 108Work holding solution 106Worm drive hose clamp 109Zirconia polycrystal ceramic 7

Product Pg No

Search December 2010 Ad Name: Hindustan Motors Pg. 124

Page 143: Search - February 2013

Search December 2010 Ad Name: Hindustan Motors Pg. 124

Page 144: Search - February 2013

ADVERTISERS’ lIST

Our consistent advertisersNot Available144 SEARCH - THE INDUSTRIAL SOURCEBOOK | f E B R U A R y 2 0 1 3

Aerotherm Systems Pvt Ltd 117

T: +91-79-25890158E: [email protected]: www.aerothermsystems.com

Allied Electronics Corporation 6

T: +91-22 61953699 E: [email protected]: www.aecconnectors.com

AMI Polymer Pvt Ltd 107

T: +91-22-28555107E: [email protected]: www.amipolymer.com

Amsak Cranes Private Limited 102

T: +91-44-26273486E: [email protected]: www.amsakcranes.com

Atul Machine Tools 108

T: +91-281-2360227E: [email protected]: www.atulmachine.com

Avasarala Technologies Limited 91

T: +91-80-26083300E: [email protected]: www.avasarala.com

Ballkings 112

T: +91-161-2534501E: [email protected]

Bhagirath Heavy Transmission 116

T: +91-11-32222661E: [email protected]

British Electricals 115

T: +91-22-40620000E: [email protected]: www.britishelectricals.com

Bry Air (Asia) Pvt Ltd 98

T: +91-11-23906777E: [email protected]: www.bryair.com

To know more about the advertisers in this magazine, refer to our ‘Advertisers’ List’ or write to us at [email protected] or call us on +91-22-3003 4653 or fax us at +91-22-3003 4499 and we will send your enquiries to the advertisers directly to help you source better.

Advertisers’ Name & Contact Details Pg No Advertisers’ Name & Contact Details Pg No Advertisers’ Name & Contact Details Pg No

C&S Electric Ltd. 49

T: +91-11-30887520-29

W: www.cselectric.co.in

Classic Polymers & Resins 113

T: +91-22-24465251E: [email protected]: www.classicpolymers.com

CNP Pumps India Pvt Ltd 39

T: +91-22-25818400E: [email protected]: www.nanfangpumps.com

Coatec India 20

T: +91-172-5063436E: [email protected]: www.coatecindia.com

Connectwell Industries Pvt Ltd 8

T: +91-251-2870636E: [email protected]: www.connectwell.com

Diamond Metal Screens Pvt. Ltd. 100

T: +91-831-2441295E: [email protected]: www.diamondscreens.com

Electronic Automation Pvt Ltd 17

T: +91-80-42802345E: [email protected]: www.eaplindia.com

Engineering Expo 119

T: +91-09819552270E: [email protected]: www.engg-expo.com

Everest Transmission 101

T: +91-11-45457777E: [email protected]: www.everestblowers.com

Fenner India Ltd 25

T: +91-44-24312450E: [email protected]: www.fennerindia.com

Festo Controls Ltd 63

T: +91-80-22894100E: [email protected]: www.festo.com

Finechrome Shafts Pvt Ltd 121

T: +91-22-29204209E: [email protected]

Flir Systems India Pvt Ltd 65

T: +91-11-4560 3555 E: [email protected]: www.flir.com/thg

G L Brothers 105

T: +91-22-66047000E: [email protected]: www.pilotindia.com

G W Precision Tools India Pvt Ltd .FIC

T: +91-80-40431252E: [email protected]: www.gwindia.in

Gandhi Automations Pvt Ltd 19

T: +91-22-66720200E: [email protected]: www.geapl.co.in

Gelco Electronics Pvt Ltd 27

T: +91-79-22200902E: [email protected]: www.gelco-world.com

Gem Telergon Switchgears Pvt Ltd 23

T: +91-422-4392648E: [email protected]: www.gtswitches.com

Geometric Ltd 103

T: +91-22-67056880E: [email protected]: www.camworks.com

Grundfos Pumps India Pvt Ltd .BC

T: +91-44-24966800E: [email protected]: www.grundfos.in

Page 145: Search - February 2013

ADVERTISERS’ lIST

Not AvailableOur consistent advertisersf e b r u a r y 2 0 1 3 | SearCH - THe INDuSTrIaL SOurCebOOK 145

Hafa Hoists Pvt Ltd 99

T: +91-22-27694837

E: [email protected]

W: www.hafahoists.com

Hannover Milano Fairs India Pvt Ltd 111

T: +91-22-42369719

E: [email protected]

W: www.hannovermesse.com

Hensel Electric India Pvt. Ltd. 10

T: +91-44-24541669

E: [email protected]

W: www.hensel-electric.de

Hi-Fab Valve Automation 66

T: +91-22-40766539

E: [email protected]

W: www.hi-fab.com

Hiflon Polymers Industries 116

T: +91-79-25857182

E: [email protected]

W: www.fluoroplastind.com

Hindustan Motor Mfg Co 143

T: +91-22-42500500

E: [email protected]

W: www.hindmotors.com

IEEMA 82

T: +91-11-23363013

W: www.meteringindia.in

Igus India Pvt Ltd 22

T: +91-80-39127800

E: [email protected]

W: www.igus.in

IMI Impex Pvt Ltd 84

T: +91-2764-233983

E: [email protected]

W: www.imitoolsindia.com

Inter Ads - Brooks Exhibitions Pvt Ltd 104

T: +91-9810042500

E: [email protected]

W: www.india.aquatechtrade.com

Advertisers’ Name & Contact Details Pg No

Jaibalaji Control Gears Pvt. Ltd., 28-35

T: +91-44-26251279

E: [email protected]

W: www.jaibalaji.firm.in

Jergens India Pvt Ltd 106

T: +91-22-41238039

E: [email protected]

W: www.jergensinc.com

Jyoti Ceramic Industries Pvt Ltd 7

T: +91-253-2350120/338

E: [email protected]

W: www.jyoticeramic.com

Jyoti Cnc Automation Pvt. Ltd. .BIC

T: +91-2827-287081

E: [email protected]

W: www.jyoti.co.in

K.U.Sodalamuthu & Co Pvt Ltd 14

T: +91-09810555577

E: [email protected]

W: www.sodaltech.net

Kabel Schlepp India Pvt. Ltd., 75

T: +91-80-41158997

E: [email protected]

W: www.kabelschlepp.com

Karcher Cleaning Systems Pvt Ltd 139

T: +91-120-4661800

E: [email protected]

W: www.karcher.in

Klipco Pvt Ltd 109

T: +91-22-28684221

E: [email protected]

W: www.klipcoclips.com

Knowell International Pvt Ltd 118

T: +91-33-22304627

E: [email protected]

W: www.knowell.co.in

Larsen & Toubro Ltd 5

T: +18002094545

E: [email protected]

W: www.lntvalves.com

Advertisers’ Name & Contact Details Pg No

Larsen & Toubro Ltd 141

T: +18002335858

E: [email protected]

W: www.larsentoubro.com

Libratherm Instruments Pvt. Ltd. 115

T: +91-22-42555353

E: [email protected]

W: www.libratherm.com

Macro Tech Equipment Pvt Ltd 85

T: +91-33-24666261

E: [email protected]

W: www.macrotechcal.com

Mahindra World City Jaipur Ltd 83

T: +91-141-3003474

E: [email protected]

W: www.mahindraworldcity.com

Metalmech Engineering 77

T: +91-288-2566810

E: [email protected]

W: www.metalmecheng.com

MGM-Varvel Power Transmission (P) Ltd 47

T: +91-44-64627008

E: [email protected]

W: www.mgmvarvelindia.com

Mipox Abrasive India Pvt. Ltd. 97

T: +91-80-65830898

E: [email protected]

W: www.mipoxindia.com

National Engineering Industries Ltd 93

T: +91-141-2223221

E: [email protected]

W: www.neibearing.com

New Autotech Industries 114

T: +91-09810509716

E: [email protected]

W: www.newautotech.in

NI Systems India Pvt Ltd 12-13

T: +91-80-41190000

E: [email protected]

W: www.ni.com

Advertisers’ Name & Contact Details Pg No

Page 146: Search - February 2013

ADVERTISERS’ lIST

Our consistent advertisersNot Available146 SEARCH - THE INDUSTRIAL SOURCEBOOK | f E B R U A R y 2 0 1 3

NMTG Mechtrans Techniques Pvt Ltd. 16

T: +91-79-22821527

E: [email protected]

W: www.nmtgindia.com

Oil Seals Mfg Co Pvt Ltd 110

T: +91-22-22047943

E: [email protected]

Prolite Autoglo Limited 41

T: +91-22-66599223

E: [email protected]

W: www.prolite.in

Rajamane Industries Pvt Ltd 100

T: +91-80-43659000

E: [email protected]

W: www.rajamane.com

Ravi Electronics 97

T: +91-79-65722609

E: [email protected]

W: www.fluconautomationinc.com

Rectifiers & Electronics 113

T: +91-11-43680100

E: [email protected]

W: www.re-india.com

Renu Electronics Pvt Ltd 48

T: +91-20-27292840

E: [email protected]

W: www.renuelectronics.com

Rexello Castors Pvt Ltd 104

T: +91-22-40917777

E: [email protected]

W: www.rexello.com

Ruby International India 112

T: +91-120-2702193

E: [email protected]

W: www.rubyinternational.com

Advertisers’ Name & Contact Details Pg No

Rupam Products 107

T: +91-288-2566749

E: [email protected]

W: www.rupamimpex.org

Shailesh Sales Corporation 121

T: +91-281-2461102

E: [email protected]

W: www.shaileshmachines.com

Shri Shyam Enterprises 99

T: +91-1762-525042

E: [email protected]

Smalley Steel Ring Company 109

T: +847-719-5900

E: [email protected]

W: www.smalley.com

Spareage Seals Ltd 73

T: +91-22-25800972

E: [email protected]

W: www.spareage.com

Strategi Automation Solutions Pvt Ltd 117

T: +91-22-66926217

E: [email protected]

W: www.strategiautomation.com

Sumitron Exports Pvt Ltd. 59, 123

T: +91-11-41410631

E: [email protected]

W: www.sumitron.com

Suraj Limited 123

T: +91-79-27540720

E: [email protected]

W: www.surajgroup.com

SYP Engineering Co Pvt Ltd 46

T: +91-22-28489969

E: [email protected]

W: www.sypco.co.in

Advertisers’ Name & Contact Details Pg No

Techno Industries 108

T: +91-79-25830742

E: [email protected]

W: www.technoind.com

Teknic 21

T: +91-22-26592392

E: [email protected]

W: www.teknic.co.in

The Indian Electric Co 61, fgf

T: +91-20-66865200

E: [email protected]

W: www.indianelectric.com

The Supreme Industries 26

T: +91-22-40430000

E: [email protected]

W: www.supreme.co.in

Tox Pressotehnik India Pvt Ltd 103

T: +91-20-66538300

E: [email protected]

W: www.tox-de.com

V R Coating 18

T: +91-20-30781022

E: [email protected]

W: www.vrcoatings.com

Vadodara Chamber Of Commerce & Indu. 54

T: +91-265-2642291

E: [email protected]

W: www.vcciexpo.org

Venus Engineers 24

T: +91-11-32222661

E: [email protected]

W: www.venusengineers.com

Weldor Engineering Pvt Ltd 106

T: +91-281-2360242

E: [email protected]

W: www.weldor.com

Wont Industrial Equipments 110

T: +91-261-2894847

E: [email protected]

W: www.wontindia.com

Advertisers’ Name & Contact Details Pg No

Page 147: Search - February 2013
Page 148: Search - February 2013

RNI No; 67827/98 Postal Regd. No: G2 / NMD 81 2011-13 Posted at Mumbai Patrika Channel Sorting Office - GPO - Mumbai 400 001

on 22nd & 23rd of Every Previous MonthDate Of Publication: 18th of Every month

148

Vol 16 N

o 02

February 2013