Phone: 715-823-2141Fax: 715-823-5769Clintonville, WIwww.seagrave.com

© 2009 Seagrave Fire Apparatus, LLC All rights reserved.SG-156

Seagrave ServiceSeagrave Fire Apparatus are sold and serviced by a nationwide, factory-trained dealer organization that is readily available to assist with all your service and technical support needs for the total Seagrave product; including cabs, chassis, bodies, pumps, ladders and aerial components. In addition, these professionals can help with specifying all the many features and options on your new custom Seagrave. Your local Seagrave dealer can be identified on the Seagrave web site, or by calling us.

Seagrave Financing• Choose any of several

attractive prepay options that serve to lower acquisition cost

• Seagrave can provide lease-purchase financing tailored to any Fire Department budget

• Proposals are immediate and easily understood

Sentinel Pumps to Choose From• Waterous CS 1250 GPM• Waterous CSU 1500 GPM

Gauge Standards• Ashcroft 6" 30-0-600 Master Compound Gauges with 5 year warranty• Ashcroft 3.5" 30-0-400 flutter-proof Line Gauges with 5 year warranty• FRC TankVision LED Tank Level Gauge with 180 degree lens

Pump Houses Available• Side mount: 48" stainless steel with: (2) 1.75" crosslays and (1) drylay, or (2) 1.75" and (1) 2.5" crosslays• Top mount: 54" stainless steel with: (2) 1.75" speedlays and (1) drylay or (2) 1.75" and (1) 2.5" speedlays Poly speedlay trays as standard

Stainless Steel MATRIX Pumper

The Sentinel

Seagrave Sentinel Pumper

More than 125 years of uncompromising quality and safe construction goes into each and every Seagrave fire apparatus, providing the most demanding Fire Departments with the highest level of performance and maintenance standards in the industry.

• Pump packaging designed to allow service to major components

• Pump house is all 3CR12 stainless steel construction• Durable brushed stainless steel exterior panels• Highly visible and clean colored placard designs to

eliminate error and improve engineer safety• Low crosslay heights reduce crew injury and fatigue• Floating module design eliminates chassis stress transfer

and provides long-term structural integrity• Seagrave hand controls provide a firm comfortable grip• Dry, flutter-proof pressure gauges with five year warranty• All stainless steel pipe with 10 year warranty utilizes

belled-end joint design for added plumbing strength and longevity

• Elkhart dual seat UNIBODY direct and in-line valves with 10 year warranty

Benefits abound with a Seagrave pump house ...

Typical Sentinel Pump Panel Layout

Proven MATRIX Body DesignTorsional frame stress absorbed by mountings — not transferred to body.• Modular stainless steel pump enclosure is isolator mounted and

independent from body• Tubular stainless steel front body cross panel is isolator mounted• Rear body is mounted on 50,000 psi steel, full support

sub-frame bolted to the chassis frame rails

• Fully loaded MATRIX body has been third party strain gauge tested including finite element analysis prove-out

Safety, reliability and advanced performance in an affordable Seagrave pumper

The Sentinel is engineered and built by Seagrave as the best value in mid-range horsepower, custom pumpers. As you might expect, Seagrave utilizes the same exceptional chassis and rugged suspension built for today’s higher horsepower engines. The stainless steel Marauder II cab features Seagrave’s exclusive safety cage construction which provides optimum protection while en route or at the scene. The stainless steel MATRIX pumper body, built with cross panel design and isolator mounting, is the strongest in the industry.

Seagrave has built it’s reputation for safety, durability, longevity and dependable performance by focusing on the needs of the most demanding Fire Departments across the nation. An integral part of the Seagrave design process is to rigorously test the designs for safety and durability. The maintenance process is also considered in the design choices. Comfort of the fire fighter is important and is revealed by the interior of the Seagrave cab, which has more height and floor space than most cabs in any class.

The Sentinel is the apparatus to meet all your needs: safety, durability, longevity, ease of maintenance, comfort of ride, and budget.

Dedicated to superior quality since 1881

Water Tanks• T-shaped• 500, 750, and 1000 gallons• Poly construction• Lifetime warranty

Seagrave Sentinel PumperMATRIX Body Standards• 146" overall length• Stainless steel construction• ROM roll-up doors• Flush rear compartment design• Replaceable fender innerliners• Polished stainless steel fenderettes• Painted stainless steel fender panels• Brushed stainless steel sill protectors

Ladder Standards• Duo-safety 585A, 10' aluminum folding• Duo-safety 775A, 14' aluminum roof• Duo-safety 900A, 24' two-section

aluminum extension

Pike Pole Standards• Nupla SPD-6, 6'• Nupla SPD-10, 10'• Fiberglass “I” handles• Aluminum tube mounts

Pre-Engineered Options• Hydraulic ladder rack• Thru-body ladder compartment with rear door• Foam systems Elkhart #240, 125 GPM FoamPro 2001, A or B 30 gallon foam cell• 6" x 10' lightweight hard suction, LS only• Harrison 10 kw hydraulic generator• Honda 5000 watt gas generator• FRC brow lights• FRC model 530, side mount telescopic pole mounted scene lights• Storage for 8 spare SCBA bottles in wheel well

Hosebed Standards• Stainless steel construction, painted job color• Aluminum slat flooring• Includes Cross panel stainless steel divider, painted job color Aluminum hose load partition with DA finish Partition reinforcement

Compartment Treatments to Maximize Space Utilization• 500 lb. adjustable aluminum shelves• 500 lb. adjustable aluminum rollout trays• 500 lb floor mounted aluminum rollout trays• Alumastrut for future shelving

Rub Rails• Anodized aluminum C-channel• Black poly, option

Rear Compartment• 33.75" high available with 500 gallon water tank• 39.75" high available with 750 or 1000 gallon

water tank

• NFPA compliant chevron reflective Diamond Grade striping

• Thru-body ladder storage option• 16" Rear platform step

Tailboards• 16" deep with or without Gripstrut• 12" deep

Marauder II cab with 2900 sq in. windshield and 10" lift and tow bumper

Featuring the Marauder II stainless steel safety cage cab, “The safest cab in the industry”

Crash tested above ECR29 and SAE standards

45 Degree cab tilt for easy service and maintenance

Hosebed Covers• Nylon reinforced vinyl in choice of colors• Hinged aluminum treadplate option

Sentinel Chassis: Rugged, Durable, DependableFront Bumper Extension: 11" or 22", both liftable and towable by the extension aloneFront Axle: Meritor MFS with S-Cam or Disc Brakes, to 20,000 lbRear Axle: Meritor RS-25-160 with S-Cam or Disc Brakes, 27,000 lbRear Suspension: Reyco 79KB spring: 24,000 lb w/ 500 gal tank; 27,000 lb with 750 or 1000 gal tankTires: Front – Michelin 315/80R22.5, Rear – Michelin 11R22.5 or 12R22.5Wheels: Painted steel or optional polished aluminumEngine: Cummins 400 HP or 425 HP ISL with engine brakeRadiator: Serpentine Radiator Core provides superior cooling capacityFuel Tank: 65 gal steel with stainless steel straps and chafe stripsAlternator: Leece-Neville 320 ampTransmission: Allison 3000-EVS with touch pad control

The Sentinel

Standard flat roof 8" raised roof

109"

• 90 Degree driver’s entry with spacious seating room

• Full width upper dash console features driver’s Information Center

Sentinel Cab: Safe, Roomy, Quiet, and Designed for ConvenienceDimensions: 130" or 140" exterior length, 96" exterior width, 59" floor-to-ceiling height (flat roof)Construction: Stainless steel reinforced welded safety-cage design with bonded roof and back wall. Highest strength-to-weight ratio in any type custom cab.Roof: Flat or 8" raised crew sectionWindshield: 2,900 sq. in. with pantographic wipersDoors: Four barrier doors with Line-X® coated inner panelsEntry/Egress: Knurled aluminum exterior hand rails and interior rubber covered grab handlesSide Access Doors: Two 25" high hinged doors with D-ring latchMirrors: Lang Mekra 300 series, heated and remote controlledSound: Sealed engine tunnel, sides, top and rear insulationSeating: H.O. Bostrom with gray Durawear upholsteryInterior Decor: Black Line-X® dash and engine cover with gray sound attenuating accent panels

Seating for 4 Seating for 6 Seating for 6 with EMS compartment

Sentinel Electric: Modern, Safe, CompliantNFPA 1901-2009 compliantSTBU Lighting: Whelen 600 LED series with halogen back upWarning Lighting: Whelen LEDOptional Scene Lighting: FRC, 120 VAC or 12 VDCCompartment Lighting: ROM strip lightsOptional Generator: Harrison 10kw hydrualic or Honda 5.0 kw gasoline

• 90 Degree officer’s entry with generous foot space

• Radiator overflow & W/W fluid access door

• Spacious and quiet crew area• Engine tunnel features insulated service

access door